Panel and Stanchion Fittings. Quick Change (QC) Inch Thread Metric Thread
|
|
- Austen Clark
- 5 years ago
- Views:
Transcription
1 Panel and Stanchion Fittings Quick Change (QC) Inch Thread Metric Thread 32
2 Panel and Stanchion fittings are used for all type of installations on seat and cargo tracks of fixed wing airplanes and helicopters, either for commercial or military use In addition to the wide range of standard seat track fittings allsafe is constantly expanding its portfolio with innovative solutions Future cabin interior will need more and more integration of the attachment functions allsafe is listening to the customer s requirements and prepared to support you - from the early design phase until full qualification of serial products Benefit from our expertise and consult us for your coming projects! Installation of no-loose-parts fitting Seat Track Fittings Installation of stud fitting with retainer Installation of no-loose-parts fitting P/N
3 2,5 4 ( 34 ) 4 2,75 ( 33 ) 4 1 ( 33 REF) Panel and Stanchion Fittings Quick Change Gives you reliable and easy to lock and unlock connection for almost all applications Please ask our staff for adaptions and load specifications } Tool-less operation Triple Stud QC Fitting TOP OF SET TRCK Triple stud fitting For stretchers and similar applications, tool-less operation > 50 kn / 1100 lbf > 20 kn / 450 lbf > 200 kn / 4500 lbf CRES and aluminium 185 grs Single Stud QC Fitting TOP OF SET TRCK Single stud fitting For lateral attachments, tool-less operation > 100 kn / 2250 lbf 25 kn / 550 lbf to 100 kn / 2250 lbf > 100 kn / 2250 lbf depending on stiffness of attachment CRES and aluminium 86 grs Double Stud QC 3/8" F Fitting Tool-less operation not rattle free > 250 kn / 5600 lbf > 150 kn / 3350 lbf > 100 kn / 2250 lbf zinc-nickel plated and aluminium, anodized 122 grs Single Stud QC Fitting ,3 6, Fitting with bracket, tool-less operation CRES and aluminium 87 grs -10 6,5 TOP OF SET TRCK grs ,5 9, ,2 106 TOP OF SET TRCK TOP OF SET TRCK * when installed in heavy duty track according to S33601 with appropriate fasteners, loads applied individually 34
4 29,2 60, (33) 50 4 (33) } Tool-less operation Single Stud QC Fitting Fitting with bracket, tool-less operation CRES and aluminium 77 grs grs grs -22 Seat Track Fittings ,2 Double Stud QC Fitting Double stud fitting Quick connect / disconnect function (tool-less), plunger spring-loaded > 270 kn / 6000 lbf > 100 kn / 2250 lbf > 200 kn / 4500 lbf Body: aluminium, anodized Stud and plunger: CRES passivated 220 grs Single Stud QC Flange Fitting Single stud flange fitting Quick connect / disconnect function (tool-less), plunger spring-loaded > 50 kn > 50 kn Body and stud: CRES passivated Retainer: aluminium, anodized 130 grs Single Stud QC Tube Fitting Single stud tube fitting Quick connect / disconnect function (tool-less), plunger spring-loaded > 50 kn > 50 kn Body and stud: CRES passivated Retainer: aluminium, anodized * when installed in heavy duty track according to S33601 with appropriate fasteners, loads applied individually grs 35
5 Panel and Stanchion Fittings Female Inch Thread Compact and standardized design meets high load capacity and excellent corrosion resistance for all type of cabin installations } Female Thread Single Stud 1/4 F Fitting NLP THRED 1/4-28 UNJF-3B SELF-LOCKING Single stud no loose parts 1/4-28 UNJF-3B (blind hole), self-locking (re-usable), Fitting and cad-plated (other finish available upon request) 27 grs Double Stud 5/16 F Fitting TL cad-plated + primer self-locking thread Double stud fitting 5/16-24 UNJF-3B (blind hole), self-locking (re-usable) lso available as no-loose-parts assembly > 270 kn / 6000 lbf > 350 kn / 8000 lbf Fitting and CRES finish: see table 90 thread-lock cad-plated + primer 47 grs thread-lock cad-plated + primer 41 grs thread-lock, no-loose-parts 47 grs thread-lock, no-loose-parts 41 grs thread-lock 47 grs thread-lock 41 grs - 51 * when installed in heavy duty track according to S33601 with appropriate fasteners, loads applied individually 36
6 } according to IRBUS standard Double Stud 5/16 F Fitting 14 Spacer 9 39 Ø Ø Ø 26 Ø 20 Double stud fitting 5/16-24 UNJF-3B (blind hole), self-locking (re-usable) > 270 kn / 6000 lbf > 350 kn / 8000 lbf in conjunction with BS1262C020 or C030 To be used with P/N BS1262F010 cad-plated + primer especially for use in wet area (galley, lavatory) cad-plated + primer 29 grs 22 grs BS1262F010 BS1262C020 Seat Track Fittings Spacer BS1262C030 Ø 26 To be used with P/N BS1262F010 cad-plated + primer 17 grs Ø 20 Plastic Cap For thread 5/16 or M8 Protects thread from pollution and fixes retainer to fitting when placed in seat-track and before installation of the monument Easy to install / remove Plastic, yellow 5 grs * when installed in heavy duty track according to S33601 with appropriate fasteners, loads applied individually 37
7 B Panel and Stanchion Fittings Inch Thread Standard fitting for medium and high loads for all type of cabin installations } Double Stud Fitting Double Stud Fitting F x TOP OF RETINER F z 394 T (-11 & ,8mm) Double stud fitting 5/16-24 UNJF-3 > 240 kn / 5400 lbf > 240 kn / 5400 lbf > 289 kn / 6500 lbf (when installed with retainer P/N , load point top of retainer) Forged steel, heat-treated and B T / grs / grs / grs / grs / grs / grs / grs / grs / grs / grs / grs / grs / grs / grs -58 Double stud fitting 3/8-24 UNJF-3 > 289 kn / 6500 lbf > 289 kn / 6500 lbf > 289 kn / 6500 lbf (when installed with retainer P/N , load point top of retainer) / grs / grs / grs / grs / grs / grs / grs / grs / grs / grs / grs / grs / grs / grs / grs / grs -51 * when installed in heavy duty track according to S33601 with appropriate fasteners, loads applied individually other dimensions upon request 38
8 G B } Retainer for Double Stud Fitting Retainer 5/ For locking in track direction, to be used with fittings type with thread 5/16 Steel, grs grs -11 Retainer 3/ For locking in track direction, to be used with fittings type with thread 3/8 Steel, grs grs grs -16 Seat Track Fittings } Double Stud Fitting ssembly Double Stud ssy /8-24 UNJF-3 5/16-24 UNJF-3 (-26 only) Fx 254 Fz TOP OF TRCK B G Double stud assembly 3/8-24 UNJF-3 > 289 kn / 6500 lbf > 289 kn / 6500 lbf > 289 kn / 6500 lbf Body: forged steel, heat-treated and Retainer: alloy steel, Other surface treatment available upon request grs grs grs grs grs grs grs grs grs grs grs grs grs grs grs grs grs /16-24 UNJF-3 > 240 kn / 5400 lbf > 240 kn / 5400 lbf > 289 kn / 6500 lbf 41 grs
9 B L Panel and Stanchion Fittings Inch Thread Choose corrosion protected Single Stud Fittings to have lightweight and standardized design for small and mediumsize cabin installations } Single Stud Fitting Single Stud 5/16 Fitting /16-24 UNJF-3 Single stud fitting 5/16-24 UNJF-3 Steel, heat treated and Ø 188 B C grs grs grs grs - 18 Single Stud 5/16 Fitting /16-24 UNJF-3 Single stud fitting 3/8-24 UNJF-3 Steel, heat-treated Finish: Ø 97 B L grs grs grs grs - 16 Single Stud 3/8 nti Rotating Fitting /8-24 UNJF-3 Single stud anti-rotating fitting 3/8-24 UNJF-3 Steel, heat-treated Finish: Ø grs grs grs grs grs grs grs grs grs - 31 * when installed in heavy duty track according to S33601 with appropriate fasteners, loads applied individually 40
10 16 20 KERL Panel and Stanchion Fittings Inch Thread Single Stud ssys for almost all applications including corrosion protected surface } Single Stud Fitting ssembly Single Stud 3/8 ssy NLP TOP OF TRCK 24 3/8-24 UNJF-3 24 Ø 194 Single stud assembly no loose parts 3/8-24 UNJF-3 Fitting and cad-plated (other finish available upon request) 46 grs Single Stud 3/8 ssy with Nut Ø /8-24 UNJF Single stud assembly anti-rotating 5/16-24 UNJF Stud and steel, heat-treated Finish: Seat Track Fittings B grs grs grs grs - 13 Single Stud 3/8 ssy with Knurled Nut Ø 254 3/8-24 UNJF-3 42 Single stud assembly anti-rotating, supplied with knurled nut 3/8-24 UNJF-3 Stud and steel, heat-treated Finish: 46 grs grs grs grs grs grs - 31 Self Locking Nut 5/16 MS acc MS grs Self Locking Nut 3/8 MS acc MS grs * when installed in heavy duty track according to S33601 with appropriate fasteners, loads applied individually 41
11 Panel and Stanchion Fittings Metric Thread Combining intelligent surface with metric thread ideal for 400M and NH90 } Single- and Double Stud Fittings Single Stud MJ8x1 / MJ8x125 Fitting B F x Single stud fitting -10: MJ8x125-11: MJ8x1 passivated 17 grs Single Stud MJ10 Fitting Single stud fitting MJ10x125 passivated 22 grs Double Stud MJ10 Fitting Double stud fitting MJ10x125 > 295 kn / 6640 lbf > 295 kn / 6640 lbf > 295 kn / 6640 lbf (when installed with retainer P/N , load point top of retainer) Stud steel forging, heat-treated and B grs grs grs grs grs - 14 Double Stud MJ10 ssy F z Ø10 THRED Ø188 MJ10 X Ø188 MJ 10 X 1,25 Ø 254 Double stud assembly MJ10x125 > 295 kn / 6640 lbf > 295 kn / 6640 lbf > 295 kn / 6640 lbf (load point top of retainer) Stud steel forging, heat treated and zinc plated, retainer alloy steel, zinc plated B grs grs grs grs grs - 14 Nut Hexagon MJ10 EN Self-locking nut to be used with thread MJ10x125 6 grs * when installed in heavy duty track according to S33601 with appropriate fasteners, loads applied individually 42
12 Panel and Stanchion Fittings Female Metric Thread Compact and standardized design meets high load capacity and excellent corrosion resistance for all cabin installations } Single- and Double Stud ssemblies Single Stud MJ6 F NLP ssy THRED MJ 6 X 1 SELF-LOCKING Single stud assembly MJ6x1 (blind hole), self-locking (re-usable), no loose parts > 100 kn / 2250 lbf > 100 kn / 2250 lbf Fitting and 27 grs Double Stud MJ8 F TL ssy Double stud assembly MJ8x1 (blind hole), self-locking (re-usable) > 270 kn / 6000 lbf > 350 kn / 8000 lbf Body and CRES finish: see table 13 grs Seat Track Fittings 90 thread-lock, no-loose-parts 47 grs thread-lock, no-loose-parts 41 grs thread-lock 47 grs thread-lock 41 grs - 51 * when installed in heavy duty track according to S33601 with appropriate fasteners, loads applied individually 43
2.3 Panel and Stanchion Fittings Panel and Stanchion Fittings
23 Panel and Stanchion Fittings Panel and Stanchion Fittings Quick Change (QC) Inch Thread Metric Thread 30 Panel and Stanchion fittings are used for all type of installations on seat and cargo tracks
More information2.4 Restraint Fittings. Restraint Fittings
24 Restraint Fittings Restraint Fittings 44 Best in class allsafe JUNGFALK provides only high quality fittings Made in Germany Integrated buckle with fitting Standard single stud fitting Our in-house production
More informationRestraint Fittings. 2.4 Restraint Fittings. } Tiedown Single Stud Fitting. Tiedown Single Stud. Tiedown Single Stud allsafe
24 Restraint Fittings Different materials and surface qualities make them custom-fit } Tiedown Single Stud Fitting Tiedown Single Stud Tiedown single stud Ultimate load: see table, with heavy-duty track
More informationSCREWED FITTINGS TRACK FITTINGS RANGE SCREWED FITTINGS P 3 SEMI-AUTOMATIC FITTINGS P 9 AUTOMATIC FITTINGS P 13 AVAILABLE SOON P 19 CONCEPTS P 23
TRACK RANGE SCREWED The 20 years to come for aviation industry will offer great opportunities to create new seat concepts and to answer to the growing demand from Final Assembly Lines for time savings,
More informationEN your reliable connection. Special blind rivet nuts
EN 9100 Tubtara your reliable connection Special blind rivet nuts Geometry and mechanical values Dejond is manufacturing a wide range of blind rivet nuts with trademark TUBTARA. The standard programme
More informationRPE Parallel Gripper- Electric Gripper Series
1.14 RPE Parallel Gripper- Electric Gripper Series Failsafe Operation: Spring closed feature allows for full grip force during power off conditions. Electrically Actuated: Requires simple 24VDC pulsed
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationKhathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
More informationConnector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
More informationNEW. Automation Technology 768 series
Automation Technology 78 series Screw locking acc. to DIN EN 07--0 Degree of protection IP7 Moulded versions Easy Assembly Excellent EMC shielding (versions with shielding rings 0 ) Versions with shielding
More informationRipple Construction Products Pvt Ltd
26 July 2017 1 Masonry: There is a tremendous variety of masonry bricks on the market. The different types of bricks (e.g. clay, sand-lime, or concrete bricks) are composed of different materials and are
More informationCONTENTS. Hammerscrews White Zinc Plated 2 Hammerscrews Stainless Steel A Nylon Frame Anchors Yellow Zinc Plated 3 Nylon Plug 3
C CONTENTS CONTENTS PAGE 1 HAMMERSCREWS Haerscrews White Zinc Plated 2 Haerscrews Stainless A2-304 2 2 NYLON FRAME ANCHOR Nylon Frame s Yellow Zinc Plated 3 Nylon Plug 3 3 WINDOW FRAME ANCHOR Window Frame
More informationCopper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationPARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
More informationWrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
More informationBIFOLD FUTON FRAME TRINITY ARM. Seat Rails and Slats x 1. *Note: Use 4pc of 100mm Bolts and 4pc of 60mm Bolts to attach the arms to the Stretchers.
1A Parts in this box. 2pc with extra holes 2pc with extra holes & plastic stoppers Arms x 2 Back Rails and Slats x 1 Full Size: Slat Supports x 6 3pc are longer for the Back deck Back Side Rails x 2 Seat
More informationTel / (USA & CANADA) /
Tel.58.847 / 8.388.459 (USA & CANADA) / Email sales@msdiscounttool.com MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to
More informationDIN 934 (1987) NEN 1560 NF E25-401
Hexagon nut DIN 94 (1987) NEN 1560 NF E25-401 Technical data d P m s M1 0,25 0,8 2,5 M1,2 0,25 1 M1,4 0, 1,2 M1,6 0,5 1,,2 M1,7 ( DIN) 0,5 1,4,5 M2 0,4 1,6 4 M2, ( DIN) 0,4 1,8 4,5 M2,5 0,45 2 5 M2,6 (
More informationK12.12 SINGLE LOCKS SERIES 8600 K12 DOORS
K12 DOORS K12.12 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Door locks series 8600... K12.12.03 1.1.
More informationA leading supplier & manufacturer of precision engineered components
A leading supplier & manufacturer of precision engineered components T: +44 (0) 1536 461140 F: +44 (0) 1536 461662 E: sales@technifast.co.uk W: www.technifast.co.uk T: +44 (0) 1536 461140 F: +44 (0) 1536
More information4.3 Section CONDUIT INSTALLATION ACCESSORIES. Thinking of the environment. Fixing accessories Coupling accessories
CONDUIT INSTALLATION ACCESSORIES Thinking of the environment We use only fully recyclable halogen-free thermoplastics, without harmful additives. No cadmium or asbestos in the colourants either. For total
More informationWORK SUPPORTS WORK SUPPORTS
COMPACT PNEUMATIC Part No. AMNS-S PNEUMATIC Part No. BJ370 PRECISION SUPPORT Part No. BJ371 Part No. BJ350 CYLINDRICAL Part No. BJ351 COIL SPRINGS FOR CYLINDRICAL Part No. BJ351-C REMOTE-CONTROL UNITS
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4:
More informationDETAIL SPECIFICATION SHEET INSERT, SCREW THREAD, LOCKED IN, KEY LOCKED, HEAVY DUTY
INCH-POUND DETAIL SPECIFICATION SHEET MS51831G 14 August 2012 SUPERSEDING MS51831F 9 March 1992 INSERT, SCREW THREAD, LOCKED IN, KEY LOCKED, HEAVY DUTY This specification is approved for use by all Departments
More informationRIVNUT. The Original Blind Rivet Nut. Tel Fax
The Original Blind Rivet Nut DISTRIBUTED BY: AIM Industries, Inc. 6216 Transit Road Depew, NY 14043 Tel. 716-681-6196 Fax. 716-681-1610 aimrivnut@aol.com www.aimfasteners.com PLUSNUT A commitment to quality
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS R5 STEP BOARD APPLICATION: 2009-2017 Dodge Ram 1500 Quad / Crew Cab 2010-2017 Dodge Ram 2500/3500 Crew Cab PART NUMBER: 28-51040, 28-51045, 28-51050, 28-51055 ITEM QUANTITY DESCRIPTION
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door
More information670 SCREWED FIX-IT KITS. Page WOOD SCREWS DOWEL PINS DOWELS STUDDING. Page Pages GROUP GROUP 651 EXTRACTOR GROUP 635 GROUP 650
Page...........556-559 635 WOOD SCREWS 650 DOWEL PINS 651 EXTRACTOR DOWELS 670 SCREWED STUDDING Page.......................560 Page.......................561 Page.......................561 Pages......................561
More informationMOUNTING INSTRUCTIONS
Standard Mounting Bracket Tilting Bracket* Mounting example Right side for upper tilt from 0 to 20 20 Spare parts: p/n SA197 Materials: extruded aluminum Hardware: stainless & zinc plated steel Dimensions
More informationDecide what reach is required. This must be at least equal to or larger than the depth of the part which needs removal. Safe Working Load (tonnes)
Sykes-Pickavant pullers are manufactured to a very high specification and subjected to rigorous testing - far exceeding their stated capacities. The legs and beams are drop forged from high quality steel
More informationSYW Industry Sdn. Bhd. Stud Anchor. Hexagon Nut / Flange Nut. U - Bolt (c/w 2 Nuts) Steel Band. 1 of 8
SYW Industry Sdn. Bhd. Stud Anchor Hexagon Nut / Flange Nut U - Bolt (c/w 2 Nuts) Steel Band 1 of 8 BT Anchor (MM size) Expansion Anchor 2 of 8 Set Anchor Sleeve Anchor with Flange Nut 3 of 8 BT Anchor
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationUP4 LEARN-A-LOT (PLAYFUL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
More informationFRAME BRACKET. Doing Our Best to Provide You the Best. Ford F250, F350 & F parts list. Page 1. 2/17 HJ32002,Rev 2.
2/17 HJ32002,Rev 2 BOlt torque specifications MEtRiC BOlts size Grade torque 8mm 8.8 23 ft/lbs. 10mm 8.8 45 ft/lbs. 12mm 8.8 78 ft/lbs. 14mm 8.8 125 ft/lbs. standard BOlts size Grade torque 5/16 5 18 ft/lbs.
More informationCAM SYSTEM. Eccentric self-locking clamping devices. Set. CAM SYSTEM t. CAM SYSTEM t. Set. CAM SYSTEM s pag CAM SYSTEM s pag.
Eccentric self-locking CAM SYSEM Set CAM SYSEM t pag. 12 CAM SYSEM t pag. 126 Set CAM SYSEM s pag. 127 CAM SYSEM s pag. 128 EDGE CLAMP pag. 130 123 CAM-SYSEM eccentric self-locking he CAM SYSEM has been
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationUP43 LEARN-A-L0T (NATURAL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
More informationUniSert Kit Assortments
Repair Kits UniSert Kit Assortments Each assortment contains the insert tools you need. The convenient durable case permits super clear storage and organization. Threaded Inserts UniSert Kit Assortments
More informationTECHNICAL INSTRUCTIONS
0 TECHNICAL INSTRUCTIONS Innovation Anode Retrofit Instructions This kit applies to all Innovation model water heaters ITEM 1: P/N 44173 ANODE MOUNTING BRACKET ITEM 2: P/N 44174 ANODE BLOCK (2 each) ITEM
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More informationSTANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000
STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal
More informationAvailable in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationStandard CATALOGUE 2018
Standard Clamping Elements CATALOGUE 2018 Company history 1890 Company founded as a lock manufacturer by Andreas Maier. 1920 Product range extended to include spanners. 1928 Production line assembly of
More informationPPM-5710 JK HEAVY DUTY SKID PLATE ASSEMBLY Version 2.0
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 PPM-5710 JK HEAVY DUTY SKID PLATE ASSEMBLY Version 2.0 GENERAL NOTES: These instructions are also available on our website; www.synergymfg.com.
More informationOptional keyway for location & alignment via key or Hepco dowel pins. Narrow rail with register face for convenience of spacing apart.
The HDS2 system comprises of a versatile family of slides, flat tracks, construction beams and other components, which will meet the requirements of the most demanding applications. 2 to 7 provide an overview
More informationmodel tsa-sa48 Sliding Crosscut Table installation guide
model tsa-sa48 Sliding Crosscut Table installation guide A Note About Color Variations Among Anodized Aluminum Components Congratulations on the purchase of this SawStop Sliding Crosscut Table. We at SawStop
More informationMETRIC FA S T E N E R S
METRIC FASTENERS CAP SCREWS & BOLTS DIN 603 Carriage Bolt, A2 SS DIN 603 Carriage Bolt, A4 SS DIN 931 Class 8.8 Hex Cap Screw, Steel Zinc DIN 931 Class 10.9 Hex Cap Screw, Plain Steel DIN 933 Class 8.8
More informationQuill Stop V2 Installation Guide 11/16/2014
Thank you for purchasing the Quill Stop for the Sieg X3 (Grizzly G0463) and SX3 (Grizzly G0619) mills. Your feedback is always appreciated. Please email questions and comments to gregpriest@cox.net. What
More information000304A A B C D 800 Top E 1000 Pag. 00/05
Measuring tools Dividers Protractors, squares Rules, scribers Screw pitch gauges Feeler gauges Welding seam gauges Drawing tools Dividers with joint Din 686 With square legs, made of forged steel. Hardened
More informationLARGE SIZE RIVET NUT FAMILY
LARGE SIZE RIVET NUT FAMILY The first product family of its kind Rivet Nuts up to 3/4-10 (M20) AS9100, ISO 9001:2008 AND ISO/TS 16949:2009 CERTIFIED FEATURES & BENEFITS Provide a Strong Thread in Thin
More informationSECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous
More informationAGILITY. ROTA WEB CLIMBER 3.3m PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT ROTAWEB33. 8 TO mm 73kg 115kg
AGILITY ROTA WEB CLIMBER.m PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT Dia. m x.m High 8 TO 4 00mm 7kg 5kg SPECIFICATION Centre Upright: Made from 6" diameter aluminium tube to
More informationThis is trial version
Guiding components, Locating units, Dowel pins, Screws, Springs, Dateand recycling inserts, Retaining rings, Lifting devices, Clamping-systems, Thermal insulating sheets, Locating rings 1.01 1.02 Ordering
More informationNAVSEA STANDARD ITEM
NAVSEA STANDARD ITEM FY-19 DATE: 01 OCT 2017 CATEGORY: I 1. SCOPE: 1.1 Title: Threaded Fastener Requirements; accomplish 2. REFERENCES: 2.1 Standard Items 2.2 S9086-CJ-STM-010/075, Fasteners 3. REQUIREMENTS:
More informationBITS, NUTSETTERS, ADAPTERS
BITS, NUTSETTERS, ADAPTERS Square Recess Power Driver Bits... Colour-Coded Square Recess Power Driver Bits... Phillips Power Driver Bits... 6 Colour-Coded Phillips Power Driver Bits... 7 Six Lobe Power
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationSelf-locking hexagon nut with flange
Self-locking hexagon nut with flange d P m s d c M5 0,8 4, 8 11,2 M6 1 5,5 10 14,2 M8 1,25 7 1 18,2 M10 1,5 8,5 15 21 M12 1,75 10 17 24 M16 2 14 22 1 Technical brochure available on request. Special features
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationK11.13 THREE-POINT LOCKS SERIES 8400 K11 DOORS
K11 DOORS K11.13 THREE-POINT LOCKS SERIES 8400 01.04.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Three-point
More informationChapter 7. Fasteners
Chapter 7 Fasteners LEARNING OBJECTIVES After studying this chapter, students will be able to: Identify several types of fasteners. Explain why inch-based fasteners are not interchangeable with metric-based
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PROTRAXX OVAL STEP BAR APPLICATION: 2009-2017 Dodge Ram 1500 Crew/Quad Cab 2010-2017 Dodge Ram 2500/500 Crew Cab PART NUMBER: 21-550, 21-555, 21-50, 21-55 AUTOMOTIVE PRODUCTS,
More informationConduit Assemblies. Complex Assembly - FLEXAquick System
ccessories Conduit ssemblies Conduit ssemblies Complex ssembly - FLEXquick System 236 Conduit ssemblies Simple ssembly Finished Products ccessories Conduit ssemblies 237 ccessories Conduits Conduits Straight
More informationAir-supply elements. 5-2 MGE 13.1 Air-supply elements. 45x90. 45x90 (p. 2 41) Rexroth strut profiles can be used as compressed-air
5-2 MGE 13.1 Air-supply elements (p. 2 41) Air-supply elements Rexroth strut profiles can be used as compressed-air 19584 L L 2N L 3NVS (p. 2 40) 009732 L 7,9 cm 2 leads and reservoirs. The hollow chambers
More informationSW 16mm. SW 15mm. SW 19mm
M B-Coding Automation Technology 7 series Screw locking acc. to DIN EN 6076--0 Degree of protection IP67 Moulded versions Degree of protection IP68 Easy assembly Excellent EMC shielding Versions with shielding
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SNYPER TUBULAR FENDERS APPLICATION: 2007-2017 Jeep Wrangler JK PART NUMBER: 62-1005, 62-1015 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1,2 2 FRONT FENDERS, DRIVER (1) AND PASSENGER
More informationMTS-ZB. RENOGY Photovoltaic Module Z-Bracket Mounting System E Philadelphia St, Ontario, CA Version: 1.
MTS-ZB RENOGY Photovoltaic Module Z-Bracket Mounting System 2775 E Philadelphia St, Ontario, CA 91761 1-800-330-8678 1 Version: 1.0 Important Safety Instructions Please save these instructions. This manual
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationPickup Box Utility Rack Package Installation (Instruction ID: )
017 Chevrolet Colorado Pickup - WD (VIN S) Canyon, Colorado Accessory Installation Manual N America Document ID: 3966961 Pickup Box Utility Rack Package Installation (Instruction ID:3144879) Installation
More informationBrydgeAir Keyboard for ipad Air
BrydgeAir Keyboard for ipad Air May 3 rd. 2016 by XiaoMing Chen & Larry Zhang PennEngineering 1 BrydgeAir Keyboard for ipad Air Overview 2 BrydgeAir Keyboard for ipad Air Details & Findings Pictures and
More informationINSTRUCTIONS INSTRUCCIONES CONSIGNES
AUTOMOTIVE PRODUCTS, INC. INSTRUCTIONS INSTRUCCIONES CONSIGNES APPLICATION: GMC SIERRA 1500 HDX & SPORTSMAN GRILLE GUARDS (2014 & UP) APPLICATION PART # S 57-3690, 57-3695, 40-3695, 45-3690 ITEM QUANTITY
More informationAir-supply elements. Air-supply elements MGE Flanged plate (p. 5-3) M12-1/4" (p. 5-4) Longitudinal end connector (p.
Air-supply elements MGE 13.0 5-1 Air-supply elements 1 2 3 4 5 6 7 8 Flanged plate (p. 5-3) Connection piece (p. 5-4) Connection screw fitting -1/4" (p. 5-4) Longitudinal end connector (p. 5-5) 9 11 12
More informationDelivery Programme _Leveringsprogramma2013_Kobout engels.indd :00
Delivery Programme 291068_Leveringsprogramma2013_Kobout engels.indd 1 01-02-13 16:00 Delivery Programme With more than 25,000 different stock articles, Kobout is your partner for fasteners. The delivery
More informationProduct # Drive Size (in) Overall Length (in) /4 5-3/ /4 6-1/ /8 7-11/ / /2 9-3/ /2 10-1/4
STANLEY Pear Head Quick Release Ratchets Pear head design for strength, durability, and performance. Quick-release mechanism to lock sockets onto the drive during operation and allow easy changeover. Reversible
More informationClamp Pair. Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum
DIN 0 CLAMPS Clamp Pairs HRL = Standard Duty (Ribbed Profile) HRGL = Standard Duty (Smooth Profile) HRS = Heavy Duty (Ribbed Profile) HRGS = Heavy Duty (Smooth Profile) Clamp Pair ore Diameter (mm) Clamp
More informationSIGNAL // POWER // INDUSTRIAL ETHERNET
CIRCULAR CONNECTORS SIGNAL // POWER // INDUSTRIAL ETHERNET 2 HUMMEL smart & reliable HUMMEL AG is a renowned manufacturer of connection technology and components for electric and heating areas. The medium
More informationset of safety brace steel cable draw-up gate kpl
0324101 7108020 8208100 Order-nr. Description Number 0324101 safety brace steel cable draw-up gate 2 7108020 hexagon-head tap bolt M8x20 galv. 2 8208100 hexagon nut M8 galv. 2 set of safety brace steel
More informationYOUR SPECIALIST SUPPLIER OF STUDBOLTS AND FASTENERS THE COMPLETE ENGINEERING SOLUTION
YOUR SPECIALIST SUPPLIER OF STUDBOLTS AND FASTENERS THE COMPLETE ENGINEERING SOLUTION Introduction Bon Accord Engineering, formed in 2015 by Jill, Phil, and Stefan Leiper, aims to provide the industry
More informationWhat is the Hydraulic 1500 Series?
What is the Hydraulic 1500 Series? = It is a Puller System which can be built up from parts or bought in kit form. = Pullers can be made for gear pulling, bearing extraction and hub withdrawal. = At the
More informationHonda. Pioneer 1000 & U.H.M.W. Skid Plate / Under Armor package. Installation guide
Contact Us: FACTORY UTV LLC. 9237 Beatty Drive Sacramento, CA 95826 Phone : (96) 383-2730 E-mail : info@factoryutv.net Go online: www.factoryutv.net U.H.M.W. Skid Plate / Under Armor package Ultra. High.
More informationSpiral gypsum plasterboard fixing
Spiral gypsum plasterboard fixing No pre-drilling: in single sheet gypsum plasterboard No surface cracking due to special thread geometry High load bearing values up to 8 kg in gypsum plasterboard per
More informationF i t t i n g t h e N e w L a n d i n g G e a r t o Y o u r S k y J i b V 1
F i t t i n g t h e N e w L a n d i n g G e a r t o Y o u r S k y J i b V 1 1 P a r t s L i s t : S t a n d a r d L a n d i n g G e a r U p g r a d e Product Code Parts + Spares Product Code Parts + Spares
More informationUNIT 9b: SCREW FASTENERS Introduction Functions Screw Features Elements Terms of a Thread Profile
UNIT 9b: SCREW FASTENERS Introduction A mechanical screw is a cylinder or cone that has a helical ridge called a thread. A helix has one or more turns, so a screw can have several turns. If the helix is
More informationAUDAS. Tel: Fax: No.259 Baichi north Rd.Haiyan.Zhejiang.
Standard State SECTION A : SCREW THREAD Basic elements of screw thread design ANSI/ASME B1.7M Nomenclature.Definitions and letter symbols for screw thread ASME B1.1 Unified inch screw thread ( UN and UNF
More informationPARTITION INSTALLATION INSTRUCTIONS
PARTITION INSTALLATION INSTRUCTIONS 2015 Chevrolet Tahoe PPV / Part Number 5703FW, FWA & FEW Do not attempt to install this product on any vehicle equipped with third row seating! Parts List Distributed
More informationFRAME BRACKET. Doing Our Best to Provide You the Best. Ford. Page 1. BOlT TORQUE SPECIFICATIONS HJ31000,Rev 0
2-13 HJ31000,Rev 0 Ford BOlT TORQUE SPECIFICATIONS METRIC BOlTS Size Grade Torque 8mm 8.8 23 ft/lbs. 10mm 8.8 45 ft/lbs. 12mm 8.8 78 ft/lbs. 14mm 8.8 125 ft/lbs. STANDARD BOlTS Size Grade Torque 5/16 5
More informationSapper XYZ 30 Monitor Arm Installation Instructions
12/01/2017 Sapper XYZ 30 Monitor rm Installation Instructions at 60% from original 59065 Step 1: ttach Mount to Work Surface Two-Piece Table lamp and eep Table lamp llen wrenches (in inches): lamp lower
More informationSmall Block Ford. 289 / 302 / 351W / 5.0 Installation Manual For Systems without A/C #13605 / #13625
Small lock Ford 289 / 302 / 351W / 5.0 Installation Manual For Systems without /C #13605 / #13625 illet Specialties, Inc. 500 Shawmut venue. La Grange, Illinois 60526 Tech Line (708) 588-0505 Fax (708)
More informationRailway. Smart solutions for the railway sector
Railway Smart solutions for the railway sector 1 «Fastening solutions for railway applications from A to Z. Bossard is your one-stop shop.» 2 SMART SOLUTIONS FOR THE RAILWAY SECTOR Better connected We
More informationFASTENERS 701L, 701L-ASS 701L-C. Over Centre Fasteners 701 Series. Over Centre Fasteners 701 Series
1 2 Over Centre Fasteners 701 Series 701L, 701L-ASS 701L - Cold Rolled 701L-ASS - 316 Stainless 701L - Zinc Plated 701L-ASS - RAW 41g Padlockable Suits Strikers 30Z & 30-ASS Ø 4.3mm Over Centre Fasteners
More informationDuraRac Shelving System
GM Full Size Van Assembly Installation Instructions Sheet 1 of 13 BEFORE YOU START! IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED IN THE SPECIFIED ORDER TO ENSURE
More informationDRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
More informationVARVIT USA, LLC SEQUOIA DRIVE SUITE 101 AURORA,ILLINOIS USA PRODUCT CATALOG
PRODUCT CATALOG With over 50 years of manufacturing experience, The Vescovini Group is one of the major players in the European market producing high quality fasteners, screws, nuts, studs, wheel bolts
More informationREISSER-Schraubentechnik GmbH THE RELIABLE CONNECTION
REISSER-Schraubentechnik GmbH THE RELIABLE CONNECTION REISSER-Schraubentechnik GmbH // Production and company headquarters in Ingelfingen Criesbach Fritz-Müller-Str. 10 74653 Ingelfingen Criesbach Germany
More informationPunch Formers, Punches & Scribers
Centerless Punch Grinders High accuracy Centerless - no alignment necessary Rollers accept 0.06 1 diameters Model Weight PGA 5.5 kg 302470 Motorized Motor 110V, 25 watts Roller speed: 130 RPM D: 1.5-25mm
More informationTOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...
TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49
More informationTAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE
TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG... 110001 #4 x 1/2"... REG... 105030... 110002 #4 x 5/8"... REG... 1 10003 #4 x 3/4"... REG...
More information