DIN 934 (1987) NEN 1560 NF E25-401
|
|
- Shona Merritt
- 5 years ago
- Views:
Transcription
1 Hexagon nut DIN 94 (1987) NEN 1560 NF E Technical data d P m s M1 0,25 0,8 2,5 M1,2 0,25 1 M1,4 0, 1,2 M1,6 0,5 1,,2 M1,7 ( DIN) 0,5 1,4,5 M2 0,4 1,6 4 M2, ( DIN) 0,4 1,8 4,5 M2,5 0, M2,6 ( DIN) 0, M 0,5 2,4 5,5 M,5 0,6 2,8 6 M4 0,7,2 7 M5 0,8 4 8 M M7 1 5,5 11 M8 1,25 6,5 1 M10 ( DIN) 1, M10 1, M12 1, M M M18 2, M20 2, M22 2, M M M0, M, M M M42 4, M45 4, M M M56 5, M60 5, M M M72X M76X M80X M90X M100X M110X Article groups Driving features Class Surface treatment Colour Code Page M hexagon St M hexagon St 8 Large M hexagon St 8 left-hand M hexagon St 8 ZNTHP-NC M hexagon St 8 Zipl M hexagon St 8 Zipl Large M hexagon St 8 Zipl left hand M hexagon St 8 Zipl yell.p M hexagon St 8 Zipl blck p M hexagon St 8 Hot d.g. iso metric M hexagon St 8 Hot d.g. oversized
2 Driving features Class Surface treatment Colour Code Page M hexagon St M hexagon St 8 FLZNNC-NC M hexagon St 10 FLZNNC-NC M hexagon St 10 Zipl M hexagon St M hexagon Free-cutting steel 6 Zipl turned M hexagon St.St. A M hexagon St.St. A2 70 COMBIFLON M hexagon St.St. A2 70 Large M hexagon St.St. A2 70 METALFORM M hexagon St.St. A2 70 left hand M hexagon St.St. A M hexagon St.St. A4 70 Large M hexagon St.St. A M hexagon Al Sopral P M hexagon Al Sopral P M hexagon Kuprodur Cu M hexagon Ti ASTM Gr M hexagon Br Cu2/Cu M hexagon Br Cu2/Cu Ni.pl M hexagon Plastic PA PA 6.6 White Hexagon nut A01B Hexagon nut M2, M M M M M M M M M M M Hexagon nut M M M M M M M M M M M M M M M M M72X6, M76X6, M80X6, M90X6, M100X6, M110X6, Hexagon nut A01B Large Hexagon nut M M M M M Hexagon nut M M M M M M M M M Hexagon nut left hand thread F01A Hexagon nut left hand thread M M M M M M10 s= M M M M M M M M M M M M
3 11040 Hexagon nut left hand thread M M Hexagon nut left hand thread 0125 Hexagon nut A95A Surface treatment Galvanized thick Cr+ passivated Hexagon 0125 nut M M M Technical brochure available on request. Hexagon 0125 nut M M M M Hexagon nut A05B Hexagon 0100 nut M M2, M M M M M M M M Hexagon 0100 nut M M M M M M M M M M M M M M M M M M Hexagon nut A05B Large Hexagon 0110 nut M M M M M Hexagon 0110 nut M M M M M M M M M Hexagon nut left hand thread F01A Hexagon nut left hand thread M M M Hexagon nut left hand thread M M M M
4 0120 Hexagon nut A06A yellow passivated Hexagon 0120 nut M M M M M M M Hexagon 0120 nut M M M M M M M M M M M M M Hexagon nut A06A black passivated Hexagon 0126 nut M M M M Hexagon 0126 nut M M M M M M M Hexagon nut iso-metric fitting thread A07A Surface treatment Hot dip galvanized Hexagon nut iso-metric fitting thread M M M M M M These hexagon nuts are used among other to hot dip galvanized bolts and screws with ISO-METRIC FITTING thread and to hot dip galvanized threaded rods with ISO-METRIC FITTING thread. The nuts are tapped AFTER galvanizing and meet the tolerances 6H. The corrosion resistance is not influenced disadvantageously, with assembled nuts, by the uncoated thread. Hexagon nut iso-metric fitting thread M M M M M M M M M M Hexagon nut oversized thread A07A Surface treatment Hot dip galvanized Hexagon nut oversized thread M M M M M M M These hexagon nuts are used among other to hot dip galvanized hexagon bolts with OVERSIZED thread and to hot dip galvanized threaded rods with OVERSIZED thread. The nuts are tapped AFTER galvanizing and DO NOT meet the ISO-metric tolerances. The corrosion resistance is not influenced disadvantageously, with assembled nuts, by the uncoated thread. Hexagon nut oversized thread M M M M M M M M M M M M M
5 04120 Hexagon nut C01C Class 10 Hexagon nut M M M M M M Hexagon nut M M M M M M M M M M M M Hexagon nut A96A Surface treatment Zinc flake Cr6+ free - ISO 1068 flznnc Hexagon 016 nut M M M M M Hexagon 016 nut M M M M M M M M M M Hexagon nut C02A Class 10 Surface treatment Zinc flake Cr6+ free - ISO 1068 flznnc Hexagon nut M M M M Technical brochure available on request. Hexagon nut M M M M M M M Hexagon nut C01C Class 10 Hexagon nut M M M M Hexagon nut M M M M M M M Hexagon nut C01C Class 12 Hexagon nut M M M Hexagon nut M M M M M M
6 1100 Hexagon nut turned F01A Free-cutting steel Class 6 Hexagon 1100 nut turned M1, M Hexagon 1100 nut turned M2, M2, M2, M, Hexagon nut Q01A Stainless steel A2 Class 70 Hexagon nut M M1, M1, M1, M M2, M M M M Sizes with a diameter > M24 are minimal property class 50. Hexagon nut M M M M M M M M M M M M M M M M M M M52 * Hexagon nut COMBIFLON R09A Stainless steel A2 Class 70 Hexagon nut COMBIFLON M M Specific features Combiflon: It's a fixed dry film coating, colour silver, with reducing effect on galling. It levels out the big scatter in coefficient of friction and reduces the average value. For a bolt /nut assembly only one product (e.g. the nut) needs to be treated with Combiflon. Reduces Bi-metallic corrosion. Hexagon nut COMBIFLON M M M M Hexagon nut Q01A Stainless steel A2 Class 70 Large Hexagon nut M M M M Sizes with a diameter > M24 are minimal property class 50. Hexagon nut M M M M M M M M
7 51089 Hexagon nut METALFORM Q01A Stainless steel A2 Class 70 Hexagon nut METALFORM M M M Special features of METALFORM: Is a dry partly visible lubricant which eliminates the possibility of seizure of threaded stainless steel fasteners. In addition the friction coefficient is reduced to a more constant value. In a bolt/nut combination it s sufficient that only the nut is lubricated to prevent seizure with METALFORM. Can be removed very easily with a solvent after application, so there s no objection of using this application in the food industry. Hexagon nut METALFORM M M M M M M Hexagon nut left hand thread R09A Stainless steel A2 Class 70 Hexagon nut left hand thread M M M M M Sizes with a diameter > M24 are minimal property class 50. Hexagon nut left hand thread M M M M M M M M27 * M Hexagon nut Q41A Stainless steel A4 Class 70 Hexagon nut M1, M M2, M M M M M M Sizes with a diameter > M24 are minimal property class 50. Hexagon nut M M M M M M M M M M M M M M M M M52 * Hexagon nut Q41A Stainless steel A4 Class 70 Large Hexagon nut M M M Sizes with a diameter > M24 are minimal property class 50. Hexagon nut M M M M M
8 5580 Hexagon nut R11A Stainless steel A4 Class 80 Hexagon 5580 nut M M M Hexagon 5580 nut M M M M Hexagon nut W01A Aluminium Sopral P40 Hexagon nut M M M Hexagon nut M M M M Hexagon nut W01A Aluminium Sopral P60 Hexagon nut M M M Hexagon nut M M M M Hexagon nut M11A Kuprodur Cu5 Class 60 Hexagon nut M M Hexagon nut M M M Hexagon nut W01A Titanium ASTM Class Gr.2 DIN 94 (1987) Hexagon nut NEN 1560 NF E M M M Titanium ASTM Grade 2 (materialnumber.705) with a high percentage of pure titanium, ensures product stability and -suitability in extremely corrosive environments where other materials i.e. stainless steel fail. Titanium Grade 2 is also suitable for other light loaded applications. Hexagon nut
9 47000 Hexagon nut M01A Brass Cu2/Cu Hexagon nut M M2, M M M M Hexagon nut M M M M M M M M M M M M Hexagon nut M01A Brass Cu2/Cu Surface treatment Nickel plated Hexagon nut M1, M1, M M2, M Hexagon nut M, M M M M M M M Hexagon nut plastic W02A Plastic Polyamide (nylon) Class PA 6.6 Colour White DIN 94 (1987) Hexagon nut plastic NEN 1560 NF E M M M M Hexagon nut plastic M M M M M M
10 Hexagon nut ISO ISO 402 Technical data d P m (max.) s M2 0,4 1,6 4 M2,5 0, M 0,5 2,4 5,5 M4 0,7,2 7 M5 0,8 4,7 8 M6 1 5,2 10 M8 1,25 6,8 1 d P m (max.) s M10 1,5 8,4 16 M12 1,75 10,8 18 M ,8 21 M ,8 24 M18 2,5 15,8 27 M20 2, M22 2,5 19,4 4 d P m (max.) s M24 21,5 6 M27 2,8 41 M0,5 25,6 46 M,5 28,7 50 M M9 4, Article groups Driving features Class Surface treatment Code Page M hexagon St M hexagon St 8 Zipl M hexagon St 8 Zipl yell.p M hexagon St 8 FLZNNC-NC M hexagon St M hexagon St 10 Zipl M hexagon St 10 FLZNNC-NC M hexagon St 5-2 for pressure vessels Hexagon nut ISO A01B Class 8 Hexagon nut ISO M M M M M M Hexagon nut ISO M M M M M M M M M M Hexagon nut ISO A05B Class 8 Hexagon 0101 nut ISO M M2, M M M M M Hexagon nut ISO M M M M M M M M M M M M M
11 0121 Hexagon nut ISO A06A Class 8 yellow passivated Hexagon 0121 nut ISO M M M M M M Hexagon 0121 nut ISO M M M M M M M M M M Hexagon nut ISO A96A Class 8 Surface treatment Zinc flake Cr6+ free - ISO 1068 flznnc Hexagon 017 nut ISO M M M M M M Hexagon 017 nut ISO M M M M M M M M M M Hexagon nut ISO A05B Class 10 Hexagon nut ISO M M M M M M Hexagon nut ISO M M M M M M M M M M Hexagon nut ISO A05B Class 10 Hexagon nut ISO M M M M M M Hexagon nut ISO M M M M M M M M M M M M Hexagon nut ISO C02A Class 10 Surface treatment Zinc flake Cr6+ free - ISO 1068 flznnc Hexagon 0410 nut ISO M M M M M M
12 0410 Hexagon nut ISO M M M M Hexagon 0410 nut ISO M M M M M M Hexagon nut for pressure vessels etc. E11A Class 5-2 Hexagon nut for pressure vessels etc. M M M M M M M M M M Hexagon nut for pressure vessels etc. Special features hexagon nuts for pressure vessels etc.: Are intended for use in pressure vessels, steam apparatus, equipment and flanged joints at temperatures from 10 C up to + 00 C, overpressures max. 40 bar and sizes up to and including M0. Meet the requirements of AD-Merkblatt W7, TRD 106 of the Technischer Überwachungsverein (TÜV) and resp. ISO and DIN According to TÜV-Merkblatt Werkstoffe 125, the manufacturer has been certified to deliver these bolts without a.1 certificate, the trademark and class designation are sufficient. This certification is also accepted by the Dutch STOOMWEZEN BV and meets the requirements M
13 Hexagon nut MF DIN 94 (1987) NEN 1560 NF E Technical data d m s M4 ( DIN),2 7 M5 ( DIN) 4 8 M6 ( DIN) 5 10 M8 6,5 1 M M12 ( DIN) M M M M18 ( DIN) M M M22 ( DIN) 18 2 M M24 ( DIN) 19 6 M d m s M26 ( DIN) M27 ( DIN) M M28 ( DIN) M0 ( DIN) M M2 ( DIN) M ( DIN) M M6 ( DIN) M M8 ( DIN) 1 60 M9 ( DIN) 1 60 M M40 ( DIN) 1 60 M42 ( DIN) 4 65 d m s M M45 ( DIN) 6 70 M M48 ( DIN) 8 75 M M52 ( DIN) M M56 ( DIN) M M60 ( DIN) M M M Article groups Driving features Class Surface treatment Code Page MF hexagon St MF hexagon St 8 left hand MF hexagon St 8 Zipl MF hexagon St 8 Zipl yell.p MF hexagon St MF hexagon Free-cutting steel 6 left hand MF hexagon St.St. A MF hexagon St.St. A Hexagon nut MF A09A Metric fine thread Hexagon nut MF d x P Art.number d x P Art.number d x P Art.number M4X0,75 ( DIN) M6X0,75 ( DIN) M8X1, M10X1, M10X1, M12X1,00 ( DIN) M12X1, M12X1, M14X1, M16X1, M16X1, M18X1,00 ( DIN) M18X1, M18X2, M20X1, M20X2, M22X1,00 ( DIN) M22X1, M22X2, M24X1,50 ( DIN) M24X2, M26X1,50 ( DIN) M27X1,50 ( DIN) M27X2, M28X2,00 ( DIN) M0X1,00 ( DIN) M0X1,50 ( DIN) M0X2, M2X2,00 ( DIN) MX1,50 ( DIN) MX2, M6X1,50 ( DIN) M6X2,00 ( DIN) M6X, M8X1,50 ( DIN) M9X1,50 ( DIN) M9X, M40X1,50 ( DIN) M40X2,00 ( DIN) M42X1,50 ( DIN) M42X, M45X1,50 ( DIN) M45X, M48X1,50 ( DIN) M48X2,00 ( DIN) M48X, M52X1,50 ( DIN) M52X, M56X2,00 ( DIN) M56X4, M60X2,00 ( DIN) M60X4, M64X4,
14 01120 Hexagon nut MF d x P Art.number d x P Art.number d x P Art.number M68X4, Hexagon nut MF 0110 Hexagon nut left hand thread A09A Metric fine thread Hexagon 0110 nut left hand thread d x P Art.number d x P Art.number d x P Art.number M12X1, M12X1, M14X1, M16X1, M18X1, M20X2, M22X2, M24X1,50 ( DIN) Hexagon 0110 nut left hand thread M24X2, M27X1,50 ( DIN) M27X2, M0X1,50 ( DIN) M0X2, MX2, M6X1,50 ( DIN) M6X2,00 ( DIN) M42X1,50 ( DIN) M45X, M48X1,50 ( DIN) M48X, Hexagon nut MF A09A Metric fine thread Hexagon 010 nut MF d x P Art.number d x P Art.number d x P Art.number M10X1, M10X1, M12X1, Hexagon 010 nut MF M12X1, M14X1, M16X1, M18X1, M20X1, Hexagon nut MF A09A Metric fine thread yellow passivated Hexagon 0140 nut MF d x P Art.number d x P Art.number d x P Art.number M6X0,75 ( DIN) M8X1, M10X1, M10X1, M18X2, M20X1, M20X2, M27X2, M0X1,50 ( DIN) M0X2, M12X1,00 ( DIN) M12X1,25 ( DIN) M12X1,50 ( DIN) M14X1, M16X1, M18X1, Hexagon 0140 nut MF M22X1, M22X2, M24X1,50 ( DIN) M24X2, M27X1,50 ( DIN) MX1,50 ( DIN) MX2, M6X1,50 ( DIN) M6X, Hexagon nut MF C02A Metric fine thread Class 10 Hexagon nut MF d x P Art.number d x P Art.number d x P Art.number M8X1, M10X1, M10X1, M12X1, Hexagon nut MF M12X1, M14X1, M16X1, M18X1, M20X1, M22X1, M24X2, M27X2, M0X2,
15 11007 Hexagon nut turned, left hand thread F01B Metric fine thread Free-cutting steel Class 6 Hexagon nut turned, left hand thread d x P Art.number d x P Art.number d x P Art.number M10X1, M12X1, M12X1, M14X1, M16X1, M18X1, M20X2, M24X1,50 ( DIN) M24X2, M27X2, M0X1,50 ( DIN) M0X2, MX2, M6X1,50 ( DIN) M45X, M48X1,50 ( DIN) Hexagon nut turned, left hand thread Hexagon nut MF R09A Metric fine thread Stainless steel A2 Class 70 Hexagon nut MF d x P Art.number d x P Art.number d x P Art.number M8X1, M10X1, M10X1, M12X1,00 * M12X1, M12X1, M14X1, Sizes with a diameter > M24 are minimal property class 50. Hexagon nut MF M16X1, M18X1, M20X1, M20X2,00 * M22X1, M24X1,50 ( DIN) M24X2, M27X1,50 * M27X2,00 * M0X1,50 * M0X2,00 * M6X1,50 * M6X,00 * Hexagon nut MF R49A Metric fine thread Stainless steel A4 Class 70 Hexagon nut MF d x P Art.number d x P Art.number d x P Art.number M8X1, M10X1, M10X1, M12X1, M12X1, Hexagon nut MF Sizes with a diameter > M24 are minimal property class 50. M14X1, M16X1, M18X1, M20X1, M22X1, M24X1,50 ( DIN) M24X2, M27X1,50 * M27X2,00 * M0X1,50 ( DIN)
16 Hexagon machine screw nut UNC ANSI B18.6. Technical data d s per inch H F No.6 2 2,9 5/16 No.8 2, 11/2 No.10 24, /8 No ,1 7/ Hexagon machine screw nut UNC X09A Unified National Coarse Free-cutting steel Class 6 Hexagon machine screw nut UNC No.6 =,51MM No.8 = 4,17MM Hexagon machine screw nut UNC No.10 = 4,8MM No.12 = 5,49MM
17 Hexagon nut UNC ANSI B BS 1768 Technical data d s per inch H F No ,5 /16 No , 1/4 No.6 2 2,9 5/16 No.8 2, 11/2 No.10 24,2 /8 1/4 20 5,6 7/16 5/ ,7 1/2 /8 16 8, 9/16 7/ ,5 11/16 1/2 1 11,1 /4 9/ , 7/8 5/8 11 1,9 15/16 / , 1.1/8 7/ /16 1.IN. 8 21,8 1.1/2 1.1/8 7 24,6 1.11/16 1.1/ /8 1./8 6 29,8 2.1/16 1.1/2 6 2,5 2.1/4 1./4 5 8,1 2.5/8 2.IN. 4,5 4,7.IN. 2.1/4 4,5 48,8./8 2.1/2 4 54,4./4 2./4 4 59,9 4.1/8.IN. 4 65,5 4.1/2 Article groups Driving features Class Surface treatment Code Page UNC hexagon St Grade UNC hexagon St Grade 5 Zipl UNC hexagon St.St. A UNC hexagon St.St. A Hexagon nut UNC X01A Unified National Coarse Class Grade 5 Hexagon nut UNC 1/ / / / / / / Grade 5 acc. to the American standard SAE J995 corresponds much the same with property class 8 acc. to DIN ISO Depending on availability also the equal class S acc. to BS 1768 (markingsign S) can be supplied. Hexagon nut UNC / / IN / / / / / IN / / / IN
18 02600 Hexagon nut UNC X01A Unified National Coarse Class Grade 5 Hexagon nut UNC 1/ / / / / Grade 5 acc. to the American standard SAE J995 corresponds much the same with property class 8 acc. to DIN ISO Depending on availability also the equal class S acc. to BS 1768 (markingsign S) can be supplied. Hexagon nut UNC 9/ / / / IN / / / Hexagon nut UNC X15A Unified National Coarse Stainless steel A2 Hexagon nut UNC No No No No No Depending on availability the austenitic steel type is comparable to AISI 04 with mechanical properties acc. to ASTM F594. Hexagon nut UNC 1/ / / / / / / / IN / Hexagon nut UNC X15A Unified National Coarse Stainless steel A4 Hexagon nut UNC 1/ / / / / / / IN / / Hexagon nut UNC Depending on availability the austenitic steel type is comparable to AISI 16 with mechanical properties acc. to ASTM F
19 Hexagon nut UNF ANSI B BS 1768 Technical data d s per inch H F No /2 No.10 2,1 /8 1/4 28 5,6 7/16 5/ ,7 1/2 /8 24 8, 9/16 7/ ,5 11/16 1/ ,1 /4 9/ , 7/8 5/8 18 1,9 15/16 / , 1.1/8 7/ /16 1.IN.-12G 12 21,8 1.1/2 1.IN.-14G 14 21,8 1.1/2 1.1/ ,6 1.11/16 1.1/ /8 1./ ,8 2.1/16 1.1/2 12 2,5 2.1/4 2.IN IN. If when ordering, UNF 1 inch-12 is not stated, then we supply the type with 14 threads per inch (UNS). Article groups Driving features Class Surface treatment Code Page UNF hexagon St Grade UNF hexagon St Grade 5 Zipl UNF hexagon St.St. A Hexagon nut UNF X01A Unified National Fine Class Grade 5 Hexagon nut UNF 1/ / / / / Grade 5 acc. to the American standard SAE J995 corresponds much the same with property class 8 acc. to DIN ISO Depending on availability also the equal class S acc. to BS 1768 (markingsign S) can be supplied. Hexagon nut UNF 9/ / / / G G / / / / Hexagon nut UNF X01A Unified National Fine Class Grade 5 Hexagon nut UNF 1/ / / / / / / / / G / / / IN
20 02100 Hexagon nut UNF Grade 5 acc. to the American standard SAE J995 corresponds much the same with property class 8 acc. to DIN ISO Depending on availability also the equal class S acc. to BS 1768 (markingsign S) can be supplied. Hexagon nut UNF Hexagon nut UNF X15A Unified National Fine Stainless steel A2 Hexagon nut UNF No / / / / / / / / G Hexagon nut UNF Depending on availability the austenitic steel type is comparable to AISI 04 with mechanical properties acc. to ASTM F
21 Hexagon machine screw nut UNF ANSI B18.6. Technical data d s per inch H F No ,5 1/4 No ,9 5/16 No /16 No.8 6, 11/2 No.10 2, /8 Article groups Driving features Class Surface treatment Code Page UNF hexagon Br Cu UNF hexagon Free-cutting steel 6 Zipl Hexagon machine screw nut UNF X09A Unified National Fine Brass Cu Hexagon machine screw nut UNF No.6-40 =,52MM No.10-2 = 4,8MM Hexagon machine screw nut UNF Hexagon machine screw nut UNF X09A Unified National Fine Free-cutting steel Class 6 ANSI B18.6. Hexagon machine screw nut UNF No.4 = 2,85MM No.5 =,18MM Hexagon machine screw nut UNF No.8 = 4,17MM No.10 = 4,8MM
22 Hexagon nut BSF BS 108 (1965) Technical data d s per inch E A 1/4 26 5, / , /8 20 7, / , / , / , 1.01 / , / IN , Whitworth thread (BSW/BSF) is not internationally recommended. It is advised to use metric (M/MF) or unified threads (UNC/UNF) Hexagon nut BSF X90A British Fine Class 6 Hexagon 0060 nut BSF 1/ / / Hexagon nut BSF 7/ / / / / IN
23 Hexagon nut BSW DIN 94 (1954) NEN 28 (1960) Technical data d s per inch m s 1/8 40 2,4 5,5 5/2 2,2 7 / ,8 10 1/4 20 5,5 11 5/ ,5 14 5/16 ( DIN) 18 6,5 1 / / ,5 19 1/ / / / / IN / / / / / / IN. 4, / Whitworth thread (BSW/BSF) is not internationally recommended. It is advised to use metric (M/MF) or unified threads (UNC/UNF). Depending on availability the dimensions may deviate. Article groups Driving features Class Surface treatment Code Page BSW hexagon St BSW hexagon St 8 Zipl BSW hexagon Free-cutting steel 6 turned BSW hexagon Br Cu Hexagon nut BSW X0A British Whitworth Class 8 Hexagon 0460 nut BSW / / / / Hexagon 0460 nut BSW 7/ / / / / IN Hexagon nut BSW X0A British Whitworth Class 8 Hexagon 0600 nut BSW / / / / / /
24 0600 Hexagon nut BSW / / IN Hexagon 0600 nut BSW Hexagon machine screw nut X08A British Whitworth Free-cutting steel Class 6 Hexagon machine screw nut 1/ / / / /16 ( DIN) / / Hexagon machine screw nut 1/ / / / / IN / / / / / / IN / Hexagon nut BSW X08A British Whitworth Brass Cu Hexagon nut BSW 1/ / / / Hexagon nut BSW 5/ / / / / / IN
25 Hexagon machine screw nut BSW 1 x d DIN 94 (1954) NEN 28 (1960) Technical data d s per inch m s 1/4 20 6,4 11 5/ ,9 1 /8 16 9,5 17 1/ ,7 22 5/ ,9 27 / ,1 2 7/8 9 22,2 6 1.IN. 8 25, /4 7 1, /2 6 8, /8 5 41, /2 4 6, Hexagon machine screw nut BSW 1 x d X08A British Whitworth Free-cutting steel Class 6 Hexagon machine screw nut BSW 1 x d 5/ / / Hexagon machine screw nut BSW 1 x d 5/ / IN / / /
Self-locking hexagon nut with flange
Self-locking hexagon nut with flange d P m s d c M5 0,8 4, 8 11,2 M6 1 5,5 10 14,2 M8 1,25 7 1 18,2 M10 1,5 8,5 15 21 M12 1,75 10 17 24 M16 2 14 22 1 Technical brochure available on request. Special features
More informationSCREW THREADS. = minor diameter. d 3. d 2. = pitch diameter
ISO : 6 Part 2 DIN : Part /20 Metric (ISO) screw thread, coarse series -M- T-00 T-002 for M to incl. M,4, fit H/6h The bold lines indicate the maximum material profiles. The maximum material profile of
More informationPASSION FOR ENGINEERING
PASSION FOR ENGINEERING PASSION A short description of the process Our bolts and other fasteners pass through a proven manufacturing process marked by hot forging technology to ensure long life, high reliability,
More informationStandard Specification for Carbon and Alloy Steel Nuts [Metric] 1
Designation: A 563M 04 METRIC Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1 This standard is issued under the fixed designation A 563M; the number immediately following the designation
More informationHex Cap Screws Coarse & Fine Thread
INDUSTRIAL Product Description Hex head cap screws are manufactured to dimensional standards of ASME B18.2.1 and to various material and mechanical standards of ASTM and SAE. The length of a cap screw
More informationKhathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
More informationObsolete fastener specialist
Obsolete fastener specialist CLASSIC FASTENERS was established circa 1988 to supply 'obsolete' and just plain hard to get fasteners to restorers of automobiles and motorcycles via a mail order service.
More informationHEADLINE BUILDING MATERIALS
EADLINE BUILDING MATERIALS eb: www.hbm.ae l Email: commercial@hbm.ae eavy ex Structural Bolts ASTM A 325M Metric Series Dimensions P.O. Box 37366, Dubai, UAE l Tel: +971 4 3475675 l Fax: +971 4 347 5485
More information1 Scope. 2 Normative references. 3 Dimensions. Page 2 DIN :
Page 2 1 Scope This standard specifies dimensions and technical delivery conditions for stud bolts with metric thread made of steel, stainless steel or nonferrous metal. 2 Normative references This standard
More informationODOT ITB Group 4 Item 33 Qty. 1
ODOT ITB 180-17 Group 4 Item 33 Qty. 1 ODOT ITB 180-17 Group 4 Item 34 Qty. 1 ODOT ITB 180-17 Group 4 Item 35 Qty. 1 ODOT ITB 180-17 Group 4 Item 36 Qty. 1 STRUCTURAL BOLTS NUCOR FASTENER TECHNICAL
More informationObsolete fastener specialist
Obsolete fastener specialist CLASSIC FASTENERS was established circa 1988 to supply 'obsolete' and just plain hard to get fasteners to restorers of automobiles and motorcycles via a mail order service.
More information670 SCREWED FIX-IT KITS. Page WOOD SCREWS DOWEL PINS DOWELS STUDDING. Page Pages GROUP GROUP 651 EXTRACTOR GROUP 635 GROUP 650
Page...........556-559 635 WOOD SCREWS 650 DOWEL PINS 651 EXTRACTOR DOWELS 670 SCREWED STUDDING Page.......................560 Page.......................561 Page.......................561 Pages......................561
More informationFasteners. Fastener. Chapter 18
Fasteners Chapter 18 Material taken from Mott, 2003, Machine Elements in Mechanical Design Fastener A fastener is any device used to connect or join two or more components. The most common are threaded
More informationStandard Specification for Carbons and Alloy Steel Nuts 1
Designation: A 563 07 Standard Specification for Carbons and Alloy Steel Nuts 1 This standard is issued under the fixed designation A 563; the number immediately following the designation indicates the
More informationHARDLOCK NUT RIM & HARDLOCK NUT BASIC
1 Clamp Load [kn] FEATURES OF HARDLOCK NUT Reusable without reduction in performance! Full torque management and completely fastened even with ZERO (0) clamp load! Available in various materials and surface
More informationThreading - Hand Taps - Button Dies - Die Nuts - Screw Extractors - Holders - Sets THREADING
Threading - Hand Taps - Button Dies - Die Nuts - Screw Extractors - Holders - Sets THREADING Threading Threading Index 198 Dies Carbon, Button Dies BA 198 Dies Carbon, Button Dies BSB 197 Dies Carbon,
More informationBOLTS AND NUTS Square Bolts( Table 1 ) Hex Nuts ( Table 7 ) Heavy Hex Nuts (Table 7) Heavy Hex Structural Bolts ( Table 2 )
BOLTS AND NUTS 1493 An externally threaded fastener that must be assembled with a nut to perform its intended service is a bolt. (Example: heavy hex structural bolt.) An externally threaded fastener that
More informationThe Recoil Product Range
The Recoil Product Range How a Recoil Insert Works Recoil inserts are rolled from high quality stainless steel wire with a diamond shaped cross section, wound to the shape of a spring thread. Once the
More informationAustralian/New Zealand Standard
AS/NZS 2451:1998 Australian/New Zealand Standard Bolts, screws and nuts with British Standard Whitworth threads (rationalized series) AS/NZS 2451:1998 This Joint Australian/New Zealand Standard was prepared
More information000304A A B C D 800 Top E 1000 Pag. 00/05
Measuring tools Dividers Protractors, squares Rules, scribers Screw pitch gauges Feeler gauges Welding seam gauges Drawing tools Dividers with joint Din 686 With square legs, made of forged steel. Hardened
More information01 FASTENERS JULY FASTENERS 1
01 FASTENERS 4 Bolts 22 Socket Screws 30 Nuts 39 Washers 53 Screws 72 Threaded Rods & Studs 73 Rivets, Rivnuts & Accessories 82 Retaining Rings 84 Pins, Links, & Sleeves 91 Key Stock & Assortments 90 Anchors
More informationThreading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
Threading Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Threading Index 148 Threading Taps Carded 149 Threading Taps Bulk Metric 150 Threading Taps Bulk Metric
More informationHigh Performance HSSE Color Ring Tap Speeds
Torque Cut High Performance HSSE Color Ring Taps RedLine Torque Cut High Performance Taps give you greater performance when tapping Steel Alloys, Stainless Steels, Titanium and a variety of other Steels
More informationTAP & DIE PRICE LIST INDEX
TAP & DIE PRICE LIST INDEX ANPT Die Page 4 BA Die Page 4 BA Tap Page 17 BSF Tap Page 19 BSB Die Page 4 BSB Tap Page 17 BSCY Tap Page 17 BSF Die Page 3 BSP Die Page 4 BSP Tap Page 18 BSPT Die Page 4 BSPT
More informationISO INTERNATIONAL STANDARD. Fasteners Non-electrolytically applied zinc flake coatings
INTERNATIONAL STANDARD ISO 63 First edition 2000-07-1 Fasteners Non-electrolytically applied zinc flake coatings Éléments de fixation Revêtements non électrolytiques de lamelles de zinc Reference number
More information1/2/2016. Lecture Slides. Screws, Fasteners, and the Design of Nonpermanent Joints. Reasons for Non-permanent Fasteners
Lecture Slides Screws, Fasteners, and the Design of Nonpermanent Joints Reasons for Non-permanent Fasteners Field assembly Disassembly Maintenance Adjustment 1 Introduction There are two distinct uses
More informationMachine threads are usually functional with internal-threaded workpieces, such as nuts
2010 Screws Machine Threads. i macine thread Machine threads are usually functional with internal-threaded workpieces, such as nuts Wood Metal Sheet Threads. i A type thread AB type thread 17 type thread
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationMATERIAL AND EQUIPMENT STANDARD FOR METRIC TYPE FASTENERS (SCREWS, BOLTS, STUDS, NUTS AND WASHERS) ORIGINAL EDITION DEC. 1997
MATERIAL AND EQUIPMENT STANDARD FOR METRIC TYPE FASTENERS (SCREWS, BOLTS, STUDS, NUTS AND WASHERS) ORIGINAL EDITION DEC. 1997 This Standard is the property of Iranian Ministry of Petroleum. All rights
More informationFasteners. Bolts. NAPA FastTrack Counter Sales Training Fasteners Page 1. Figure 1. Typical Measurements for a Bolt or Hex Head Cap Screw
Fasteners Many types and sizes of fasteners are used in the automotive industry. Each fastener is designed for a specific purpose and condition. One of the most commonly used type of fastener is the threaded
More informationThreadlocking Adhesives
Threadlocking Adhesives Locking of Threaded Fasteners Why use a Threadlocker? threadlocking products prevent self-loosening and secure any threaded fastener against vibration and shock loads. They are
More informationLOCTITE WEBINAR SERIES Threadlocking & the Torque-Tension Relationship
LOCTITE WEBINAR SERIES Threadlocking & the Torque-Tension Relationship Meet Your Presenters Doug Lescarbeau Michael Feeney Market Development Director Doug.Lescarbeau@Henkel.co m Application Engineer Michael.Feeney@Henkel.com
More informationOur Values. Profile. Mission. Engineering Know-How. Performance. Security
(86-272-56) Our Values Performance A SOLUTION OF High Strength Anti Loose Corrosion Chemical Resistance Solution Profile SYNERGIX, a SINGAPORE SME company since year 2000. It s operation specialize in
More informationThreading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
THREADING Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Index Hand Taps - Carded Metric Coarse UNF BSW 93 93 93 Hand Taps - Bulk Metric Coarse Metric Fine Metric
More informationBarofor Round System (polyester coated) Panels, Posts, Accessories
1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts
More informationPOWER PRICE UNI. powerful UNF METAL. UNCPower UNIVERSAL TAPS. power ful. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER UNIVERSAL TAPS SAL UNIVERSAL
MADE BY UNIVERSALtaps TOP QUALITY FROM GERMANY at a Power Price TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT Form universal
More informationStandard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1
Designation: A 325M 00 METRIC An American National Standard Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1 This standard is issued under the fixed designation A 325M;
More informationSTI-SCREW THREAD INSERT TAP OPTIONS
-SCREW THREAD INSERT TAP OPTIONS EXPANDED OFFERING SCREW THREAD INSERT TECHNOLOGY PREVENT STRIPPING on Safety Critical Threading Applications with. Screw Thread Insert Tapping Options EMUGE (Screw Thread
More informationFaçade Solution. Produces façade & cassette solutions
Façade Solution Façade Solution Produces façade & cassette solutions The company produces facade solutions using its cutting edge Qatari manufacturing facility. All facades are manufactured & delivered
More informationUSER MANUAL Nord-Lock X-series washers
USER MANUAL Nord-Lock X-series washers JOINT GUIDE 3 ASSEMBLY INSTRUCTIONS 4 TECHNICAL DATA 5 TORQUE GUIDE 5 THE EXCEPTIONAL SYSTEM THAT PREVENTS BOLT LOOSENING AND SLACKENING Nord-Lock X-series washers
More informationChemical composition. Type 2 as per F568: C ( ); P (max 0.048); S (max 0.058); Mn (min 0.74); B (min );
BS EN 14399 HIGH STRENGTH STRUCTURAL BOLTING FOR PRE LOAD Direct comparison as an alternative to ASTM HSFG Bolts ASTM A325M Type 1, ASTM A490M Type 1 or 2 BS EN 14399-3:2005 Grade 8.8 and 10.9 Chemical
More informationRecoil Brand Products
Recoil Brand Products Threaded Inserts,Taps,Tooling & Kits Recoil Fasteners Worldwide consistency of quality Total commitment to quality and service Comprehensive range of products Efficient international
More informationFlame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
More informationAN ISO 9001 : 2008 CERTIFIED COMPANY. DAkkS Deutsche Akkreditierungsstelle D-ZM
AN ISO 9001 : 2008 CERTIFIED COMPANY DAkkS Deutsche Akkreditierungsstelle D-ZM-16096-01-01 COMPANY PROFILE: Petrofast ME is the leading manufacturer and suppliers of fasteners ideally located in phase
More informationLimited Warranty And Exclusive Remedy
Limited Warranty And Exclusive Remedy THE WORLD LEADER Deepak Fasteners Ltd., through its Unbrako Division and associated companies, warrants that these products conform to industry standards specified
More informationStandard Specification for Quenched and Tempered Steel Bolts and Studs 1
Designation: A 44 00 Standard Specification for Quenched and Tempered Steel Bolts and Studs This standard is issued under the fixed designation A 44; the number immediately following the designation indicates
More informationFASTENERS. Fasteners. Steel fasteners. Hexagon socket screws. Steel fasteners MC6S
Steel fasteners 21 FASTENERS Steel fasteners Hexagon socket s MC6S Hexagon socket head cap Din 912. (ISO 4762). * Fully threaded. 100 101 102 12.9 Uncoated 8.8 Uncoated 8.8 BZP Blanc Zink plated Dim mm
More informationA training course delivered at a company s facility by Matrix Engineering, an approved provider of Bolt Science Training
A training course delivered at a company s facility by Matrix Engineering, an approved provider of Bolt Science Training Following is an outline of the material covered in the training course. Each person
More informationT Pac2 standard for prevailing torque threadlocker Dri-Loc Plastic. Introduction. Contents. 1 Scope and field of application
T-26728 Pac2 standard for prevailing torque threadlocker Dri-Loc Plastic Test, material and performance specifications Introduction This standard conforms where applicable to DIN 267 part 28, DIN 267 part
More informationTaps. Taps - Technical Info. Torque Cut High Performance HSSE Ring Colored Taps Technical Information. - Technical Information
Torque Cut High Performance HSSE Ring Colored Taps Technical Information RedLine Torque Cut High Performance Taps give you greater performance when tapping Steel Alloys, Stainless Steels, Titanium and
More informationOWNER: POSITION AUTHOR: POSITION Dan Boettcher Director of Engineering Richard Richardson Vice-Dir of Engineering
KRESS CORPORATION ENGINEERING Design of Thru and Threaded Holes Standard DOC ID 095007 REVISION A TYPE PORTAL OWNER: POSITION AUTHOR: POSITION Dan Boettcher Director of Engineering Richard Richardson Vice-Dir
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T5782-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 21.060.10 J 13 GB/T 6171-2016 Replacing
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationsalto safe 4028 A12 Turn-tilt windows
A12 Turn-tilt windows salto safe 4028 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. 32 9 388 88 81 - F. 32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com salto safe 4028 Contents 1. General
More informationDATA SHEET TWIST DRILLS. D1c DRILLS, TAPS, AND GAGES E.F.Barrett October Trotter and Callaham October 1947 (D1c) May of 7.
TWIST DRILLS DATA SHEET Sheet #: Title: Updated by: Updated: Originally Compiled by: Issued: Revised: Page: D1c DRILLS, TAPS, E.F.Barrett October 1999 Trotter and Callaham October 1947 (D1c) May 1953 1of
More informationStandard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 1
Designation: A 94 0 Standard Specification for Steel Transmission Tower olts, Zinc-Coated and are This standard is issued under the fixed designation A 94; the number immediately following the designation
More informationDelivery Programme _Leveringsprogramma2013_Kobout engels.indd :00
Delivery Programme 291068_Leveringsprogramma2013_Kobout engels.indd 1 01-02-13 16:00 Delivery Programme With more than 25,000 different stock articles, Kobout is your partner for fasteners. The delivery
More informationSPECIFICATION FOR HIGH STRENGTH STRUCTURAL BOLTS
UDC 621.882.211 [669.14.018.291] IS : 3757-1985 (Reaffirmed 2003) Edition 3.2 (1989-07) Indian Standard SPECIFICATION FOR HIGH STRENGTH STRUCTURAL BOLTS ( Second Revision ) (Incorporating Amendment Nos.
More information0101/ Thread technology for high-strength fastenings imperial threads UNC, UNF, BSW, BSF, BSP/G, BA
0101/15.02 Thread technology for high-strength fastenings imperial threads UNC, UNF, BSW, BSF, BSP/G, BA 2 Contents The HELICOIL system System modules the fastener Page Technology 05 Designs 06 A close
More informationNAVSEA STANDARD ITEM
NAVSEA STANDARD ITEM FY-19 DATE: 01 OCT 2017 CATEGORY: I 1. SCOPE: 1.1 Title: Threaded Fastener Requirements; accomplish 2. REFERENCES: 2.1 Standard Items 2.2 S9086-CJ-STM-010/075, Fasteners 3. REQUIREMENTS:
More informationFixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
More informationRECOIL. Technical Catalogue
RECOIL Technical Catalogue Table of Contents Introduction...3 Recoil Range...4 How a Recoil Insert Works...5 How a Locking Insert Works...8 Locking Insert Torque Values...9 Lubricants and Coatings... 10
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationINDIAN TOOL MANUFACTURERS (DIVISION) PRICE LIST 412 (Effective from 01/04/2012)
Trade Combine Birla Precision Technologies Limited INDIAN TOOL MANUFACTURERS (DIVISION) PRICE LIST 412 (Effective from 01/04/2012) HSS PARALLEL SHANK (JOBBER SERIES) TWIST DRILLS IS: 5101 MM SIZE INC H
More information3400 E. WALNUT STREET COLMAR, PA DORMAN / ROCKFORD
WEATHERLY #770 D-2013-A JUNE 2013 SUPERSEDES R-2009-F APR. 2009 2013 DORMAN / ROCKFORD 1-800-523-2492 Corporate Office & Customer Service www.dormanproducts.com 2013 Dorman Products, Inc. No reproduction
More informationTesting of friction properties of fasteners
2018-02-13 Sida 1 (31) Testing of friction properties of fasteners Contents 1 Introduction 2 2 Scope 2 3 Terms and definitions 3 4 Structure of evaluation of friction properties 5 5 Cleaning of test parts
More informationTHE WORLD LEADER.
THE WORLD LEADER www.unbrako.com unbrakosales@unbrako.com Securing the World For more than 100 years, Unbrako has designed and manufactured premium and custom designed fasteners and forged components for
More informationRecoil Wire Thread Inserts and Tooling
Recoil Wire Thread Inserts and Tooling Recoil Wire Thread Insert Systems Designed and Manufactured for Quality and Reliability Recoil leads the way in wire thread insert systems, offering a broad product
More informationCH # 8. Two rectangular metal pieces, the aim is to join them
CH # 8 Screws, Fasteners, and the Design of Non-permanent Joints Department of Mechanical Engineering King Saud University Two rectangular metal pieces, the aim is to join them How this can be done? Function
More informationOUR QUALITY POLICY VISION MISSION
AUSTENITE FASTENERS PVT.LTD. A unique name in fasteners line has come long way since its taking over Krishna Engineering Company which was established in 1999. The company has it is manufacturing plant
More informationAlfa Laval Material Standard T
Marking of material and components for heat exchangers Prepared and edited by Materials & Chemistry Centre, Tumba, Sweden Page No. of pages Revision No. Date 1 7 10 2014-04-28 COPYRIGHT Alfa Laval AB 2014.
More informationEN your reliable connection. Special blind rivet nuts
EN 9100 Tubtara your reliable connection Special blind rivet nuts Geometry and mechanical values Dejond is manufacturing a wide range of blind rivet nuts with trademark TUBTARA. The standard programme
More informationMechanical joints. Major diameter Mean diameter Minor diameter Pitch p chamfer. Root Crest. Thread angle 2a. Dr. Salah Gasim Ahmed YIC 1
Screw fasteners Helical threads screws are an extremely important mechanical invention. It is the basis of power screws (which change angular motion to linear motion) and threaded fasteners such as bolts,
More informationTH READ GAGES Certification of Compliance to Class (Short Form)... No Charge Certification of Calibration to Size (Long Form)...$15.
New Swanson Gages TH READ GAGES Certification of Compliance to Class (Short Form)... No Charge Certification of Calibration to Size (Long Form)...$. / member TA PER PIPE GAGES Certification of Compliance
More informationCoatings ASTM B117 SST Salt Spray Test Kesternick Phosphate Zinc E-Coat Dip Spin Coatings
Head and Thread types Coatings ASTM B117 Two major types of coating tests: SST Salt Spray Test screws are placed in a container and a salt solution is sprayed on the screws for a number of hours, checking
More informationSprinkler wet pipe and dry pipe. For FM approval of the dry pipe model "I" shall be used. SBF 120: 7 applies to model "E".
Product Name Nordic Flow FM Thin Wall Pipes Application Sprinkler wet pipe and dry pipe. For FM approval of the dry pipe model "I" shall be used. SBF 120: 7 applies to model "E". Manufacturing Standard
More informationStandard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 1
Designation: A 94 0 e Standard Specification for Steel Transmission Tower olts, Zinc-Coated and are This standard is issued under the fixed designation A 94; the number immediately following the designation
More informationTap Drill Chart. Metric Tap Drill Size (Recommended Drill Sizes Suitable for 6H Tolerance) Roll Form Tap Drill Size
Tap Drill Chart Tap Size Nom. Size Tap Cutting Tap Drill Size Metric Tap Drill Size (Recommended Drill Sizes Suitable for 6H Tolerance) Roll Form Tap Drill Size Machine Screw Sizes NC & NF Tap Size Cutting
More informationAS/NZS 1214:2016 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) AS/NZS 1214:2016
(ISO 10684:2004, MOD) Australian/New Zealand Standard Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) AS/NZS 1214:2016 This joint Australian/New Zealand standard was
More informationClamp Pair. Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum
DIN 0 CLAMPS Clamp Pairs HRL = Standard Duty (Ribbed Profile) HRGL = Standard Duty (Smooth Profile) HRS = Heavy Duty (Ribbed Profile) HRGS = Heavy Duty (Smooth Profile) Clamp Pair ore Diameter (mm) Clamp
More informationAttachment of Residential Deck Ledger to Side of Metal Plate Connected Wood Truss Floor Ladder. Installation Instructions Revised 9/2/2016
Attachment of Residential Deck Ledger to Side of Metal Plate Connected Wood Truss Floor Ladder Installation Instructions Revised 9/2/2016 SBCA has been the voice of the structural building components industry
More informationTAPTITE Fasteners. High Performance Thread Rolling Screws for Metals
TAPTITE 2000 Fasteners High Performance Thread Rolling Screws for Metals TAPTITE 2000 thread forming technology joins two unique concepts and advances fastener performance to new levels. TAPTITE 2000 fasteners
More informationSOUTH AFRICAN NATIONAL STANDARD
ICS 21.060.20 ISBN 0-626-15095-7 SANS 1700-14-11:2003 ISO 7417:1984 SOUTH AFRICAN NATIONAL STANDARD Fasteners Part 14: Hexagon nuts Section 11: Hexagon nuts for structural bolting Style 2, hot-dip galvanized
More informationENGLISH METRIC. Nord-Lock washers. The original wedge-locking solution
ENGLISH METRIC Nord-Lock washers The original wedge-locking solution The proven original Since the Nord-Lock Group began operations in 1982 we have focused on providing the world s most effective bolt
More informationRecoil Products. Wire Thread Inserts & Tooling
Recoil Products Wire Thread Inserts & Tooling RECOIL WIRE THREAD INSERT SYSTEMS Designed and Manufactured for Quality and Reliability Recoil leads the way in wire thread insert systems, offering a broad
More informationA training course delivered at a company s facility by Matrix Engineering, an approved provider of Bolt Science Training
A training course delivered at a company s facility by Matrix Engineering, an approved provider of Bolt Science Training Following is an outline of the material covered in the training course. Each person
More information9/8/98 AC B CAUTION THE FOLLOWING TORQUE VALUES ARE DERIVED FROM OIL FREE CADMIUM PLATED THREADS.
TABLE 7-1. Recommended torque values (inch-pounds). CAUTION THE FOLLOWING TORQUE VALUES ARE DERIVED FROM OIL FREE CADMIUM PLATED THREADS. TORQUE LIMITS RECOMMENDED FOR INSTAL- LATION (BOLTS LOADED PRIMARILY
More informationGround Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
More informationIndian Fasteners Marketing
+91-8048719601 Indian Fasteners Marketing https://www.indiamart.com/indian-fasteners-marketing/ Our organization is recognized as an affluent Wholesaler and Supplier of an assorted range of Bolts, Nuts
More informationSwivel Hoist Ring RIGGING ACCESSORIES. Color coded to distinguish between UNC (Red) and Metric (Silver) thread types.
RIGGING ACCESSORIES Color coded to distinguish between UNC (Red) and Metric (Silver) thread types. Available in UNC and Metric thread sizes. UNC threads available in sizes from 800 pounds to 100,000 pounds,
More informationEvaluation of In-Pavement Light Fixture Designs and Performance
Evaluation of In-Pavement Light Fixture Designs and Performance Presented to: IES ALC Fall Technology Meeting By: Joseph Breen Date: Background In-Pavement Light Fixture Assemblies Utilize a Circle of
More informationComponents: Dimensions / Order Codes
Heavy Twin Series Components: Dimensions / Clamp Body Profiled Design Profiled Inside Surface with Tension Clearance Clamp Body Standard Materials Polypropylene Colour: Green Material code: PP Polyamide
More informationSCREWS MACHINE. Slotted Phillips Six-Lobe Square Recess Pozi-Alternative Combination Recess Military Commercial Metric Inch
SCREWS MACHINE Slotted Phillips Six-obe Square Recess Pozi-Alternative Combination Recess Military Commercial Metric Inch INCH COMMERCIA COMBINATION DRIVE BINDING UNDERCUT FAT HEX WASHER Green (Header
More informationDisclaimer. Socket Products Socket depth limits maximum torque. Torque figures are based on 80% of maximum torque for a given key size.
E546 V3 (1/17) Disclaimer Torque values listed in this book are based on mathematical calculations and experimental data. The values are valid only when the matched strength system listed is used. The
More informationSELF-TAPPING SCREW FIXINGS
Denomination: Reference: FT ROS-en Date: 15/12/15 Revision: 3 Page: 1 of 14 T81 AUE T82 TCP T83 TFI CHARACTERISTICS ISO 1478 self-tapping thread. Require pre-drilling. Point Type F. Wide variety of head
More informationIsolating Spark Gaps. Isolating spark gaps at an additional earth ring conductor. Isolating spark gaps for Ex zones
Isolating Spark Gaps Isolating spark gaps at an additional earth ring conductor Isolating spark gaps for Ex zones 187 Protective Spark Gaps For use at roof supports for overhead lines For indirect connection
More informationemhartamericas.com EMHART TEKNOLOGIES 4 Shelter Rock Lane, Danbury, CT Tel. (877) EMHART-1 Fax: (800) emhartamericas.
emhartamericas.com Inserts Heli-Coil Inserts have evolved since their inception in the 1930 s and now include the complete range of both tanged and tangless free running and screw lock wire insert systems.
More informationSUBMITTAL INFORMATION "BOLTS, NUTS AND FLAT WASHERS" "ABSTRACT OF ASTM A307 GRADE A AND B" CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH
"BOLTS, NUTS AND FLAT WASHERS" "ABSTRACT OF ASTM A307 GRADE A AND B" CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH GRADE: LOW CARBON STEEL GRADE A GRADE B PHOSPHOROUS MAX % 0.06 0.04 SULFUR,
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T819.
Translated English of Chinese Standard: GB/T819.2-2016 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB ICS 21.060.10 J 13 Replacing GB/T 819.2-1997
More informationUNIT 9b: SCREW FASTENERS Introduction Functions Screw Features Elements Terms of a Thread Profile
UNIT 9b: SCREW FASTENERS Introduction A mechanical screw is a cylinder or cone that has a helical ridge called a thread. A helix has one or more turns, so a screw can have several turns. If the helix is
More information