COMPRESSION STEM CATALOG PAGE INDEX D - E
|
|
- Edgar Eaton
- 6 years ago
- Views:
Transcription
1 COMPRESSION STEM CATALOG PAGE INDEX D - E Danze...pg 2 Delta-Delex...pg 3-4 Dick Brothers...pg 5-7 Dishmaster...pg 8 Dominion...pg 8 Dornbracht...pg 9 East River...pg Eljer...pg Encore...pg BROACH COUNT 16PT OUR RETURN POLICY All parts are shipped sealed in a clear plastic bag so you can examine it carefully upon receipt. If the part is not correct, you can return it for full refund less freight as long as the bag is unopened. PLEASE NOTE The part you get may differ from the picture due to design or color changes, but this does not compromise the specification integrity. Heights are measured from the washer. But in some cases, if the stem is unique, it is then measured from the exact bottom. OUR NUMBER SYSTEM Our stem* part numbers consist of letters denoting manufacturer, followed by four numbers. The first number denotes the category, as follows: MFR 1 ### = Assemblies MFR 2 ### = Stems MFR 3 ### = Units (Stem & Bonnet) * MFR 4 ### = 2 Handle Ceramic Cartridges MFR 5 ### = Bath and Shower Diverters MFR 6 ### = Caps, Bonnets, & Bushings MFR 7 ### = Single Lever Cartridges MFR 8 ### = Miscellaneous * MFR 9 ### = Balancing Spools KEY FOR SYMBOLS OS OLD STYLE, FOR REFERENCE ONLY PL PLASTIC SO SPECIAL ORDER ACM3xxx MANUFACTURER CATEGORY PART NUMBER ACM3009 HEIGHT ALFANO PLUMBING PARTS Roosevelt Avenue Corona, Queens, NY TEL: FAX: and are only intended to reference the products which our parts replace Alfano Plumbing Parts
2 DANZE 38PT DEEP WALL EXTENSION KIT FOR 1/2 THERMOSTATIC VALVE 11/32 OS 15/16 5/8-24 H= 2 5/8-24 H= 1-3/ /32 H= 3-13/32 DNZ1002 DNZ1001 DNZ1005 7/8-20 H= 2-3/16 DNZ Tel: Fax: Page: 2
3 DELTA-DELEX delta seat removing tool WHILE SUPPLIES LAST! 16PT STOP ASSEMBLY stop for t&s models H= 1-5/8 spring loaded stop H= 1-3/4 DEL1003 DEL1005 DEL1010 DEL1007 DEL1012 ADJ. STOP REPAIR KIT: SOLD WITH SEAT & SPRINGS 11/32 11/32 11/32 PL WITH STAINLESS STEEL BASE PL WITH STAINLESS STEEL BASE PL HEAVY DUTY WITH CERAMIC SEAT AND BASE PL STAINLESS STEEL PLATE, BRASS STEM DEL2018 DEL2020 DEL2022 DEL Tel: Fax: Page: 3
4 DELTA-DELEX single lever vacuum breaker DEL2006 DEL2008 DEL2010 DEL2012 DEL2016 DEL2024 reverse ball with spring bonnet nut & washer SOLD AS A PAIR 11/32" DEL2030 H= 1-15/16 DEL2028 vacuum breaker PL slow self-close DEL1009 conversion ball - from knob to lever DEL8002 stem extension single knob PL Tel: Fax: Page: 4
5 DICK BROTHERS HANDLE SCREW 10/24 16PT BIBB SCREW 8/32 DKB2004 DKB2002 DKB2008 DKB2006 DKB2010 DKB2020 DKB1003 DKB2012 DKB2014 DKB2018 DKB2016 DKB2022 DKB Tel: Fax: Page: 5
6 DICK BROTHERS 16PT H= 2-23/32 DKB2026 DKB2028 DKBD158 DKB2030 DKB2032 DKB2034 DKB2036 DKB Tel: Fax: Page: 6
7 DICK BROTHERS LOOK FOR DIVERTER ASSEMBLIES IN OUR SEPARATE CATALOG 16PT DKB3005 H= 6 H= 4-21/32 H= 5-29/32 DKB2042 DKBD159 DKB3003 DKB5007 DKB Tel: Fax: Page: 7
8 DISHMASTER DOMINION 17PT HANDLE SCREW 8/32 BIBB SCREW 8/32 H= 1-29/32 DSH1003 DSH2002 DOM Tel: Fax: Page: 8
9 DORNBRACHT NON-RISING 3/4 NON-RISING 20PT 5/16 H= 2-5/16 H= 2-7/16 DOR1007 DOR1005 H= 2-17/32 H= 3-3/8 13/16 x 14TPI H= 2-1/8 DOR1012 Stem adapter available NON-RISING H= 5-29/32 DOR1009 DOR1003 DOR Tel: Fax: Page: 9
10 EAST RIVER BIBB SCREW 10/24 SO approx. 2-3/4 approx. 2-1/2 approx. 2-1/4 ESRD095 ESR2006 ESR2008 ESR2010 ESR Tel: Fax: Page: 10
11 EAST RIVER LOOK FOR DIVERTER ASSEMBLIES IN OUR SEPARATE CATALOG approx. 3-3/8 H= 6-3/4 ESR2014 ESR3003 ESR3005 ESR3007 ESR Tel: Fax: Page: 11
12 ELJER LOOK FOR DIVERTER ASSEMBLIES IN OUR SEPARATE CATALOG ELJ1003 ELJ2004 ELJ1007 ELJ1005 ELJ3003 ELJ1011 ELJ1013 ELJ1015 ELJ2006 Sold As Unit ELJ3035 Sold As Unit ELJ3037 Sold As Unit ELJ3012 H= 2 H=2-3/16 H= 2-5/16 H= 1-7/16 H= 15/16 ELJ1019 ELJ2008 ELJ2010 ELJ1017 ELJ Tel: Fax: Page: 12
13 ELJER SOLD AS UNIT ELJ3043 SOLD AS UNIT ELJ3012 SOLD AS UNIT ELJ3045 No Longer Available No Longer Available No Longer Available H=2-5/16 H=2-5/16 H=2-13/16 ELJ2014 ELJ2016 ELJ2018 ELJ2020 ELJ2022 ELJ1021 ELJ1023 ELJ2024 ELJ2026 ELJ Tel: Fax: Page: 13
14 ELJER LOOK FOR DIVERTER ASSEMBLIES IN OUR SEPARATE CATALOG ELJ1029 ELJ2028 ELJ1031 ELJ3004 SOLD AS UNIT ELJ3057 & ELJ3059 SOLD AS UNIT ELJ3053 & ELJ3055 No Longer Available H=3-5/16 H= 3-7/16 ELJ2034 ELJ2036 ELJ1035 ELJ Tel: Fax: Page: 14
15 ELJER SOLD AS UNIT ELJ3063 No Longer Available No Longer Available H= 4-1/16 ELJ2040 ELJ2042 ELJ2044 ELJ2046 ELJ Tel: Fax: Page: 15
16 ELJER 20PT 20PT 9/32 13/32 16PT 12PT NLA SOLD AS UNIT ELJ3065 & ELJ3067 No Longer Available H= 4-1/16 specify length ELJ1043 ELJ2050 ELJ2052 ELJ2054 ELJ Tel: Fax: Page: 16
17 ELJER SOLD AS UNIT ELJ3069 & ELJ3071 No Longer Available H= 5-1/4 ELJ2056 ELJ2057 ELJ Tel: Fax: Page: 17
18 ELJER LOOK FOR DIVERTER ASSEMBLIES IN OUR SEPARATE CATALOG H= 2-5/16 H= 3-1/16 ELJ3012 ELJ3029 ONLY AVAILABLE WITH SLEEVE ALSO AVAILABLE WITH SLEEVE H= 5-3/16 H= 4-5/16 H= 4-5/16 H= 5-3/16 ELJ3021 ELJ3031 ELJ3005 ELJ Tel: Fax: Page: 18
19 ELJER LOOK FOR DIVERTER ASSEMBLIES IN OUR SEPARATE CATALOG ELJ3033 ELJ3035 ELJ3037 ELJ3039 ELJ3041 H= 2-5/16 H= 2-13/16 H= 2-13/16 H= 3 H= 3-7/16 SPRING LOADED H= 2 H= 2 H= 2-3/16 H= 2-3/16 H= 2-5/16 ELJ3043 ELJ3045 ELJ3047 ELJ3049 ELJ Tel: Fax: Page: 19
20 ELJER LOOK FOR DIVERTER ASSEMBLIES IN OUR SEPARATE CATALOG H= 3-7/16 spring loaded ELJ3055 ELJ3057 ELJ3059 ELJ3051 H= 4-1/16 H=41-11/16 H= 3-7/16 H= 3-1/4 H= 3-1/4 ELJ3063 ELJ3061CP ELJ Tel: Fax: Page: 20
21 ELJER LOOK FOR DIVERTER ASSEMBLIES IN OUR SEPARATE CATALOG H= 4-1/16 H= 5-1/4 H= 5-1/8 ELJ3067 ELJ3069 ELJ Tel: Fax: Page: 21
22 H= 3-1/8 ELJER LOOK FOR DIVERTER ASSEMBLIES IN OUR SEPARATE CATALOG ELJ5003 H= 3-5/16 H= 3-17/32 H= 3-21/32 H= 3-25/32 H= 4 ELJ5019-LONG AVAILABLE WITH H= 4-7/8 ELJ5005 ELJ5007 ELJ5009 ELJ5011 ELJ Tel: Fax: Page: 22
23 ELJER LOOK FOR DIVERTER ASSEMBLIES IN OUR SEPARATE CATALOG 20PT 16PT H= 4-21/32 H= 4-27/32 H= 4-27/32 H= 4-1/16 H= 4-5/32 ONLY AVAILABLE WITH SLEEVE Substitute: ELJ5011 No Longer Available ELJ5017 ELJ5021 ELJ5023 ELJ5025 ELJ Tel: Fax: Page: 23
24 ELJER LOOK FOR DIVERTER ASSEMBLIES IN OUR SEPARATE CATALOG H= 5-27/32 H= 5-3/8 H= 4-27/32 H= 4-31/32 H= 4-31/32 ONLY AVAILABLE WITH SLEEVE ELJ5033 ELJ5027 ELJ5029 ELJ5035 ELJ Tel: Fax: Page: 24
25 ENCORE LOOK FOR DIVERTER ASSEMBLIES IN OUR SEPARATE CATALOG H= 2-17/32 H= 1-13/16 SOLD WITH HANDLES ENC3012 ENC3005 ENC3003 H= 2-9/16 ENC3010 ENC3009 ENC Tel: Fax: Page: 25
26 ENCORE LOOK FOR DIVERTER ASSEMBLIES IN OUR SEPARATE CATALOG REPAIR KIT INCLUDES HANDLE SOLD WITH HANDLE AND CAP H= 2-29/32 H= 3-9/16 H= 1-15/16 ENC2002 ENC3008 ENC3011 ENC Tel: Fax: Page: 26
BATH & SHOWER DIVERTER CATALOG PAGE INDEX D - H
BATH & SHOWER DIVERTER CATALOG PAGE INDEX D - H Danze...pg 2-3 Delta-Delex...pg 4-6 Dick Brothers...pg 7 Dornbracht...pg 7 East River...pg 8 Eljer...pg 9-11 Elkay...pg 12 Federal Huber...pg 12 Gerber...pg
More informationCOMPRESSION STEM CATALOG PAGE INDEX A
COMPRESSION STEM CATALOG PAGE INDEX A Acme Brass...pg 2-3 Acorn...pg 4 Altmans...pg 4 American Brass...pg 5-8 American Standard...pg 9-29 Apex...pg 30 Aquabrass...pg 30 Arrowhead Brass...pg 31 Arti Deco...pg
More informationACM3xxx COMPRESSION STEM CATALOG ACM3009. TEL: FAX:
COMPRESSION STEM CATALOG California...pg 2 Cambridge...pg 2 Case...pg 2 Central Brass...pg 3-17 Chase...pg 18 PAGE INDEX C Chicago...pg 19-23 Cifial...pg 23 Comco...pg 23 Crane-Repcal...pg 24-34 BROACH
More information2-HANDLE CERAMIC CARTRIDGE CATALOG
2-HANDLE CERAMIC CARTRIDGE CATALOG Altmans...pg 2-3 American Standard...pg 4-5 Aquabrass... pg 6 Aquasource... pg 6 Arti Deco... pg 7 Artistic Brass... pg 8 Auburn Brass... pg 9 B&K... pg 10 Balocchi...
More informationCOMPRESSION STEM CATALOG PAGE INDEX I - K
COMPRESSION STEM CATALOG PAGE INDEX I - K Imports...pg 2-4 Indiana Brass...pg 5-7 Jaclo...pg 8 Jameco...pg 9-10 Jr. Smith...pg 11 Kalista...pg 11 Kingston Brass...pg 12-13 Kohler...pg 14-31 Krowne...pg
More informationBATH & SHOWER DIVERTER CATALOG
BATH & SHOWER DIVERTER CATALOG Indiana Brass... pg 2-3 Jaclo... pg 4 Jado... pg 5 Jameco... pg 6 Kalista... pg 7 KCG... pg 8 Kingston Brass... pg 9 PAGE INDEX I - P Kohler... pg 10-15 Matco-Norca... pg
More informationBATH & SHOWER DIVERTER CATALOG
BATH & SHOWER DIVERTER CATALOG Acme Brass...pg 2 Altmans...pg 2 American Brass...pg 3 American Standard...pg 4-7 Aquabrass...pg 8 Arrowhead Brass...pg 8 Arti Deco...pg 9 Artistic Brass...pg 9 PAGE INDEX
More information2-HANDLE CERAMIC CARTRIDGE CATALOG
2-HANDLE CERAMIC CARTRIDGE CATALOG Eljer... pg 2 Elkay... pg 3 Encore... pg 4 EZ-Flo... pg 4 Franke... pg 5 Gerber... pg 6 Glacier Bay... pg 7 Grohe... pg 8 Hansa... pg 9 Hansgrohe... pg 9 Harden Brass...
More informationSINGLE LEVER CARTRIDGE CATALOG PAGE INDEX I - O
SINGLE LEVER CARTRIDGE CATALOG PAGE INDEX I - O Imports...pg 2-3 Indiana Brass...pg 5 Jado...pg 6 Jaclo...pg 7 Kalista...pg 8...pg 9-12 Kingston Brass...pg 13-14 Kohler...pg 15-19 Krowne...pg 20 KWC...pg
More information2-HANDLE CERAMIC CARTRIDGE CATALOG
Newport Brass...pg 2 Nicolazzi...pg 2 Omni...pg 3 Ottone & Meloda...pg 3 Opella...pg 4 Pacifica...pg 4 Paini...pg 5 Paul...pg 5 Pegasus...pg 6 Perlick...pg 6 Phylrich...pg 7 Premier...pg 8 Price Pfister...pg
More informationSEATS CATALOG PAGE INDEX
SEATS CATALOG PAGE INDEX Metric...pg 2 3/8 x 27...pg 4 13/32 x 28...pg 4 7/16 x 20...pg 4 7/16 x 24...pg 4 7/16 x 27...pg 5 15/32 x 27...pg 5 1/2 x 20...pg 6-7 1/2 x 24...pg 8 1/2 x 27...pg 9 1/2 x 28...pg
More informationESCUTCHEONS & NIPPLES THREAD CODE CHART UNIVERSAL
ESCUTCHEONS & NIPPLES THREAD CODE CHART ID # SIZE MANUFACTURER 1 1/2" - 24 Thread Sayco 2 9/16" - 20 Thread American Standard, Central Brass 3 5/8" - 18 Thread Price Pfister, Repcal 4 5/8" - 24 Thread
More informationPLASTIC BALLCOCK Includes: Vinyl Refill Tube, Float Rod, Flange Nut, Washer, 5/8 or 1/2 Coupling Nut and Water Level Adjustable Screw.
Flush Valves PLASTIC BALLCOCK Includes: Vinyl Refill Tube, Float Rod, Flange Nut, Washer, 5/8 or 1/2 Coupling Nut and Water Level Adjustable Screw. Toilet Flappers 51005 10 Anti siphon 5 50 6.25 P51005
More informationInstallation and Maintenance Instructions
Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship for a period of one (1) year from
More informationAPPLICATION CHART. Tractor Model * Wood Splitter HOME TRACTORS ATTACHMENTS INDEX
R Ingersoll HOME WOOD SPLITTER J31, K31 AHSHD, HSHD, J32, K32, J32 J34, K34, L34 AHSWD, HSWD, K36 Parts Catalog 8-2052 NOTE: This Catalog replaces Catalog 8-2051 TRACTORS ATTACHMENTS INDEX PAINT GENERAL
More informationPARTS LIST. Model MFT-HD Cleco
PARTS LIST Model MFT-HD Cleco 0 0 0 0 0 0 0 0 HD-0- Centershaft HD-0- Centershaft Screw HD-0- Lift Collar HD-0- Eyebolt HD-0- Hex Nut HD-0- Draw Rod HD-0- Washer - Draw Rod HD-0- Face Plate, " Diameter
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Square Free Standing Floor Mount Tub Filler Model D35900900 Thank you for selecting DXV. To ensure that your installation proceeds smoothly, please read these instructions carefully
More informationWHITE ARCHIPELAGO PRESSURE BALANCE MIXING VALVE TRIM ONLY, TO SUIT M ROUGH
INSTALLATION INSTRUCTIONS CW-00 WHITE ARCHIPELAGO PRESSURE BALANCE MIXING VALVE TRIM ONLY, TO SUIT M-0 ROUGH CB-00 BLACK ARCHIPELAGO PRESSURE BALANCE MIXING VALVE TRIM ONLY, TO SUIT M-0 ROUGH CW-0 WHITE
More informationNew Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
More informationPressure Balance Shower Only Dual Control (Volume & Temperature) Ceramic Disc Cartridge Platinum Shower Trim Kit
Shower Only PL8900-00 & TR-SH Pressure Balance Shower Only Dual Control (Volume & Temperature) Ceramic Disc Cartridge Platinum Shower Trim Kit - Installation Instructions Before Your Installation Read
More informationINSTALLATION GUIDELINES
STYLE No. DSXS20 with 8 Shower Head and Metal Cross Handles STYLE No. DSXS2C System with Metal Cross Handles STYLE No. DSXS30 with 8 Shower Head, Metal Lever and Cross Handle STYLE No. DSXS3C System with
More informationPARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE DRILLS
NON-REVERSING HANDLE ASSEMBLY (SERIAL NO S. STARTING WITH B & D ) PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE DRILLS Form A277D Date 2008July11/C Page 1 of 8 4. 14309 Ring O 5. 14312 Ring O 12. 54156
More informationAlessi Installation Guide - vjun16
- vjun16 1 Thank you for purchasing this Alessi bath screen. Please study these instructions carefully before assembly and installation. Checking of Parts Parts are listed at the beginning of this guide.
More information.com. More than a machine. Power your life. Operating Manual
Operating Manual Dear Customer, Thank you very much for purchasing a product made by MAXNOVO MACHINE. Our machines offer a maximum of quality, technical good solutions and convince by an outstanding price
More informationDOOR TECHNOLOGY ORDER CATALOG SECTION SECURY Automatic Door Lock & Gripset Handle
DOOR TECHNOLOGY ORDER CATALOG SECTION 03.3 SECURY Automatic Door Lock & Gripset Handle Table of Contents 03.3 SECURY Automatic Door Lock & Gripset Handle SECURY Automatic Door Lock...03.3.5 Automatic
More informationMetFit MECHANICAL FITTINGS
MECHANICAL FITTINGS ENGINEERED FOR DEPENDABILITY HOW THEY WORK & WHY THEY ARE DIFFERENT CONSISTENT, REPEATABLE INSTALLATION Simple one-step squeezing motion COMPENSATES FOR COLD FLOW Ring maintains continuous
More information1/2 2 (DN 15 50) Standard Bore Series /2 1-1/2 (DN 15 40) Full Bore Series 9000 Flanged Ball Valves with ISO Bonnet
1/2 2 (DN 15 50) Standard Bore Series 7000 1/2 1-1/2 (DN 15 40) Full Bore Series 9000 Flanged Ball Valves with ISO Bonnet Installation, Maintenance and Operating Instructions IMO-214 EN 1/2018 2 IMO-214
More informationParts Catalog MIXERS
Parts Catalog MIXERS MODELS: SP20 & SPC20 SP20 0--2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
More informationParts Catalog MIXERS
Parts Catalog MIXERS MODELS: SP0 & SPC0 SP0-3-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
More informationcaroma marc newson shower mixer
caroma marc newson shower mixer PLUMBERS INSTALLATION INSTRUCTIONS IS1215A(07/12) Important Information Brazed connections should NOT be made directly onto the mixer, as excessive heat will cause permanent
More informationVINYL CLASSIC FREESTANDING PERGOLA ASSEMBLY INSTRUCTIONS
P a g e 1 VINYL CLASSIC FREESTANDING PERGOLA ASSEMBLY INSTRUCTIONS Shown: 8' x 12' Vinyl Classic Pergola with 12" Top and Main Runner Spacing The design of this pergola is based on all posts being installed
More informationInstallation Instructions
Contemporary Square Floor Mounted Tub Filler Thank you for selecting American-Standard... the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly-- please read
More informationWAL-RICH CORPORATION SINCE 1950 SINK SPECIALTIES FLEXIBLE BASIN SUPPLY TUBES
FLEXIBLE BASIN SUPPLY TUBES W-R# Size (OD) Finish Min Box 0209008 3/8" x 12" CP 1 100 0209012 3/8" x 20" CP 1 100 0209014 3/8" x 30" CP 1 50 0209016 3/8" x 36" CP 1 50 0209020 ½" x 20" CP 1 50 FLEXIBLE
More informationInstallation Instructions
Contemporary Round Floor Mounted Tub Filler Thank you for selecting American-Standard... the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly-- please read
More information.com. More than a machine. Power your life. Operating Manual
Operating Manual www.maxnovomachine +86-514-87892928 info@maxnovomachine Dear Customer, Thank you very much for purchasing a product made by MAXNOVO MACHINE. Our machines offer a maximum of quality, technical
More informationParts Catalog MIXERS
Parts Catalog MIXERS MODEL: SP60 & SPC60 SP60 0-2-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
More informationPreference Collection 5531 Accessory Console I NSTALLATION GUIDE
Preference Collection 5531 Accessory Console I NSTALLATION GUIDE WARNING Failure to install the 5531 as described in this installation guide may cause the unit to collapse, resulting in serious injury
More informationInstallation and Maintenance Instructions
Installation and Maintenance Instructions Bradley Barrier-Free HN-300 In-Wall Shower Table of Contents Pre-Installation Information................2 Warranty...............................2 Components
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL RS22A & AW-SERIES PREWASH UNIT CRS66A ML-104052 R-L ML-104055 L-R CRS66AW ML-104086 R-L ML-104087 L-R CRS76A ML-104202 R-L ML-104201 L-R CRS86A ML-103910 R-L ML-103911
More informationPreference Collection and Treatment Console INSTALLATION GUIDE
Preference Collection 5580.69 and 5580.96 Treatment Console INSTALLATION GUIDE WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious
More informationInstallation, Maintenance and Operating Instructions
Emission-Pak ASSEMBLY CARTRIDGES A, B AND C MODEL B FOR: 1/2 2 (DN 15 50) SERIES 5150 1/2 2 (DN 15 50) SERIES 5300 AND 530S 3/4 1-1/2 (DN 20 40) SERIES 6150 3/4 1-1/2 (DN 20 40) SERIES 6300 2 (DN 50) SERIES
More informationOperating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table
Operating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-140780 Ph.: 800-274-6848 Revision B1 05/2014 www.jettools.com Copyright
More informationFixed Spacesaver Mounting Hardware. for use with MaTRx Series wheelchair backs. Installation Manual
Fixed Spacesaver Mounting Hardware for use with MaTRx Series wheelchair backs Installation Manual - 2 - Table of Contents 1.0 Tools Required 2.0 Hardware Kit Contents 3.0 Before Installation - Important!
More informationB Range Faucet. T&S Brass and Bronze Works, Inc. Travelers Rest, South Carolina
B-0575 Range Faucet 1 Piece, Swivel 001622-45 2 O-Ring, (.103 C/S x.206 I.D.) 009268-45 3 Dyanmic Bearing 001621-20 4 Spring, O-Ring Brg. 001625-45 5 Nut, Swivel 001623-40 6 O-Ring, Center Body 001069-45
More informationHYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog INDEX HOME TRACTOR ATTACHMENTS APPLICATION CHART
R Ingersoll HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog 8-3091 HOME TRACTORS ATTACHMENTS PAINT GENERAL INFO INDEX Deck. Belt and Idler Pulley...5 Mounting Bracket...7 Rear Wheels...7 Hydraulic Drive...9-13
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS VELT ELECTRIC TRI-LEG FLOOR MOUNTED TILTING 2/3 JACKETED KETTLES MODEL VELT20 VELT30 VELT40 VELT60 VELT80 VELT100 ML-103442 ML-103443 ML-103444 ML-103445 ML-103446 ML-052999
More informationHOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG
6 HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER W By JOEL B. LONG ITH this bench grinder you can keep your cutting tools sharp and do general offhand grinding, and can, with the aid of various attachments,
More informationPreference Collection 5543 Central Console INSTALLATION GUIDE
Preference Collection 5543 Central Console INSTALLATION GUIDE WARNING Failure to install the 5543 as described in this installation guide may cause the unit to collapse, resulting in serious injury to
More informationStaples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.
Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic
More informationSTEP 1: FIND IMAGE AND/OR PART # OF TRIM THAT YOU PURCHASED
INSTALLATION INSTRUCTIONS Brass Trims for Thermostatic Valve (J-TH34/J-TH) Confidence from start to finish. STEP 1: FIND IMAGE AND/OR PART # OF TRIM THAT YOU PURCHASED (THIS IS WHAT FINISHED PRODUCT WILL
More information5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves
MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping
More informationBINKS TROPHY AIR SPRAY GUN
BINKS TROPHY AIR SPRAY GUN PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products and services to the surface
More informationUII Pump Parts
0-4-0-4-UII Pump Parts. Page 66 95-0305 September 009 Parts Lists 0-4-0-4-UII Pump Parts QTY. PER PUMP PART NOTES 0-U Pump Body See Note 0-U Pump Body with Flush See Note 4-U Pump Body See Note 4-U Pump
More informationMueller Gas Products. Mueller H17800 Curb Stop Tee No Blo Curb Stop Tee Weld x Weld 1440 PSI
Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller H17800 Curb Stop Tee No Blo Curb Stop Tee Weld x Weld 1440 PSI MUELLER NO-BLO
More informationPH HA22 PH HA22 PH HA23
CH-SB... HA4 CH-SC... HA4 CH-SD... HA4 CH-SE... HA4 DH-20011... HA5 DH-20021... HA5 DH-20031... HA5 DH-20041... HA5 DH-20051... HA5 DH-20061... HA5 DH-20211... HA6 DH-20221... HA6 EHB001... HA15 EHB002...
More informationMetal Components Incorporated
Metal Components Incorporated Catalog 2015 Elegant Pot Rails for Range Hoods and Other Applications that are Stylish and Practical for all kitchens! Metal Components, Incorporated 1-973-247-1204 www.stainlesssteelpotracks.com
More informationEngineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard
Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard 5. Input Cover 6. O-Ring 7. Hex Head Cap Screw 8. Input
More informationDisc, Belt, and Combination Disc/Belt Sanders
This Manual is Bookmarked Operating Instructions Parts Manual Disc, Belt, and Combination Disc/Belt Sanders Models: 4200A, 4300A, 4400A 4200A Disc/Belt Sander 4300A 6 Inch Belt Sander 4400A 12 Inch Disc
More informationInstallation Instructions 3/4 Thermostatic Valve Rough-in & Trim (PL8950)
Tub & Shower PL950 Installation Instructions 3/ Thermostatic Valve Rough-in & Trim (PL950) CONTENT 0 - Valve & stop vlave specifications 03 - Face plate specifications 0 - Handle specifications 05 - Shower
More informationRepair Manual 12 PL PILOT
Repair Manual 12 PL PILOT 12 PL PILOT REPAIR MANUAL INDEX Introduction... 1 Elastomer Materials... 2 Disassembly... 3 Assembly... 7 Testing... 11 NOTE: We reserve the right to modify or change, without
More informationWall-Mounted Basin Set
P24702-LV 2014 1 of 6 KALLISTA THANK YOU FOR CHOOSING KALLISTA We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual before you install your KALLISTA product.
More informationHEAVY DUTY CENTRIFUGAL PUMPS
HEAVY DUTY CENTRIFUGAL PUMPS Supplemental Assembly Manual DryLock 1 Static Seal Cartridge 1. Place the slide rings (24A & 24B) into the bore of the rotary seal housing (24). The shortest slide ring goes
More informationA. This Section includes plumbing fixtures and related components.
SECTION 224200 PLUMBING FIXTURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More information12. Mechanical Drawings & Parts Breakdown List
12. Mechanical Drawings & Parts Breakdown List Note: When ordering parts, please be prepared with, 1. Machine model & serial number. 2. Item number. 3. Part number and description. 4. Year of Production.
More informationRWB-2D 2-DRAWER HEAVY DUTY WORK BENCH RWB-2S 2-SHELF HEAVY DUTY WORK BENCH RWB-1TD HEAVY DUTY WORK BENCH WITH FLUID CATCH
IMPORTANT SAFETY INSTRUCTIONS SAVE THIS MANUAL PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO INSTALLATION AND OPERATION. BY PROCEEDING WITH THIS HEAVY DUTY WORK BENCH ASSEMBLY YOU AGREE THAT
More information30AUTO Speed Lathe Manual
30AUTO Speed Lathe Manual Standard Features 3/4 HP Motor Air-Collet Closure 1800 RPM, Single Speed Electric Brake Cast Housing 5C Collets 3 Phase / 240 Volts DESCRIPTION: The Crozier Model 30AUTO Automotive
More informationOperating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040
Operating Instructions and Parts Manual 10 x 16 Horizontal Band Saw Models J-7020, J-7040 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414472 Ph.: 800-274-6848 Revision C2 03/2014 www.jettools.com
More informationINSTALLER S GUIDE CAUTION BDS-0050: SWING MOUNTED ASSISTANT VAC PAC FOR BEL-50 AND BEL-20N DENTAL CHAIRS BDS-0050
INSTALLER S GUIDE BDS-0050: SWING MOUNTED ASSISTANT VAC PAC FOR BEL-50 AND BEL-0N DENTAL CHAIRS Location for all the incoming utilities should be in accordance with the cabinet installation instructions.
More informationTROLLA LEAVY 97 CM Lawn sweeper
TROLLA LEAVY 97 CM Lawn sweeper Artikel nr.: 1008 EN Operating manual 014/1 Dear Customer, Congratulations on your new Trolla product. We hope you will enjoy it. Checkout with your new Trolla product may
More informationInstallation Manual ZGuard Mounting Options
Installation Manual ZGuard Mounting Options Above-Counter Heavy-Duty Flange (EZ-Span) (Entire EZ-Span unit not shown) Lift EZ-Span unit up until bottom of 1.5" diameter post clears internal heavy duty
More information20" WOODTURNING LATHE Model 3520A
20" WOODTURNING LATHE Model 3520A Instruction Manual & Parts List M-0460221 (800) 248-0144 www.powermatic.com SPECIFICATIONS: 3520A Lathe Table with standard extensions... 28 x 38 Distance Between Centers...
More informationSpecifications & Measurements
Specifications & Measurements For Catalog No. 1701 Effective July 1, 2016 Prices are subject to change without notice. Unless price is protected in writing, shipments will be at the prevailing prices.
More informationGeneral Information. Ball Curb Valve
General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead)
More informationJARVIS. Model BR-3 Blade Reconditioner ... EQUIPMENT TABLE OF
- Model BR-3 Blade Reconditioner EQUIPMENT SELECTION.......... Ordering No. TABLE OF CONTENTS............................ Page Model BR-3 (100 mm Blade) 115V/60Hz............ 4011003 220V/50Hz............
More informationInstallation guide. MODERN LEVER Basin/Sink multi-fit. Set
Installation guide MODERN LEVER Basin/Sink multi-fit Set What makes us different? EXTRA Features Convert any existing taps to lever style Three quarter turn lever for finer flow and temperature control
More informationGRAND PIANO HARDWARE AND ACCESSORIES
GRAND PIANO HARDWARE AND ACCESSORIES LID SUPPORT CUP No. 938 - Solid brass. Each No. 938N - Nickel plated. Each GRAND RAIL PROP NUTS Slotted grand rail prop nuts for replacement. Solid Brass. No. 925 -
More informationEmission-Pak Assemblies
Emission-Pak Assemblies 25, 35 and 45 Installation, Maintenance and Operating Instructions IMO-266 EN 11/2017 2 IMO-266 EN TABLE OF CONTENTS 1. GENERAL... 3 2. INSTALLATION... 3 2.1 Installation Into Pipeline...
More informationCheckmate Stops & Holders. Absolute Door Control and Entire Opening Protection
Checkmate Stops & Holders Absolute Door Control and Entire Opening Protection checkmate stops & holders TABLE OF CONTENTS General Information...3 How to Select Product...4 Options...5 Certifications...5
More informationThe wick in your heater needs replacing if, after repeated cleanings, any of the following conditions still exist:
WICK REPLACEMENT The wick in your heater needs replacing if, after repeated cleanings, any of the following conditions still exist: Slow to light, hard movement of the wick adjuster knob, kerosene odor
More informationUSER MANUAL & PARTS LIST MODEL 136A S/N:
NUMBERALL STAMP & TOOL CO., INC. USER MANUAL & PARTS LIST MODEL 136A S/N: P.O. BOX 187, 1 HIGH ST. SANGERVILLE, ME 04479 www.numberall.com office@numberall.com TEL: 207-876-3541 FAX: 207-876-3566 MODEL
More informationHEAVY DUTY WEIGH FEET KIT. Installation Instructions
HEAVY DUTY WEIGH FEET KIT Installation Instructions PUBLISHED BY Gallagher Group Limited Kahikatea Drive, Private Bag 3026 Hamilton, New Zealand www.gallagher.co Copyright Gallagher Group Limited 2010.
More informationAssembly Instructions
Laminate/Phenolic & 1 Pc Butcherblock Tops Before you begin, please make sure all parts and proper quantities are included. (See on next page) Any parts damaged during shipment must be reported within
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL 4246 MIXER-GRINDERS 4246S 4246HD 4246S 4246S 4246HD 4246HD STANDARD (5 HP./1 HP.) ML-134220 HEAVY DUTY (7.5 HP./1 HP.) ML-134221 PRIOR MLS COVERED IN THIS MANUAL STANDARD
More informationPARTS CATALOG FRONT WHEEL DRIVE FOR JOHN DEERE 6100 & WHEEL SPRAYERS
PARTS CATALOG FRONT WHEEL DRIVE FOR JOHN DEERE 6100 & 6500 3 WHEEL SPRAYERS MUD HOG MODEL NUMBERS JD6500-13.5-16.1 I3 Tire (Export) JD65003-12.5L-15 I3 Tire TUTHILL Transport Technologies Brookston Indiana
More informationMiniature Steam Pty Ltd (Incorporating Live Steam Supplies)
Miniature Steam Pty Ltd (Incorporating Live Steam Supplies) Materials List 28 May 2013 The attached listings outline products we offer and their retail prices as at the above date. We reserve the right
More informationTK 1014 A POWER SHEAR
TIN KNOCKER TK 1014 A POWER SHEAR Parts Diagram & Operating Instructions TAAG INDUSTRIES CORP. 1550 SIMPSON WAY, ESCONDIDO, CA 92029 Tel: (800) 640-0746 Fax: (760) 727-9948 Website: www.tinknocker.com
More informationChar-Lynn Hydraulic Motor. Repair Information. R Series General Purpose Geroler Motor November, 1996
Char-Lynn Hydraulic Motor November, 1996 Repair Information General Purpose Geroler Motor 001 002 2 Geroler Motors Parts Drawing Bearing Race Needle Thrust Bearing Key Output Shaft Cap Screw -001 12 pt
More informationBICO INC. GRINDING PLATES
BICO INC. GRINDING PLATES IRON PLATES UA-51 Standard Iron Alloy Plate - Stationary 11/5 UA-52 Standard Iron Alloy Plate - Revolving 11/5 UA-94 Wear Resistant Iron Alloy - Stationary 11/5 UA-95 Wear Resistant
More informationFNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4
More informationWINCH OPERATING PRACTICES 1. Read the manufacturer's instructions before operating the winch. 2. Always inspect, test maintain and operate this winch in accordance with American National Standards Institute
More informationReliance SG800 Series Steel Water Gage Valves
Installation, Operation, & Maintenance Instructions R500.541D1 10/16/2016 Reliance SG800 Series Steel Water Gage Valves Note: Design variations in Steel Water Gage Valves necessitate typical illustrations,
More informationPARTS LIST: Air Control Assembly (1632 Sander)
PARTS LIST: Air Control Assembly (1632 Sander) 1 6293482 Filter... 1 2 6293483 Solenoid Valve... 1 3 6293484 Brake Cylinder... 1 4 6293485 Multi-Hole Connector... 1 5 6293486 Air Valve... 1 6 6293487 Air
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HCM450 PIZZA CUTTER/MIXER ML-141055 ML-141058 ML-141144 PRIOR ML COVERED IN THIS MANUAL ML-136226 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43221 Rev.
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0503 ***IMPORTANT UPDATE*** For Machines Mfd. Since 11/06 and Owner's Manual Revised 05/11 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.
MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SHOWER DOOR KIT ALUMINUM 2503 E. Vernon Avenue, Los Angeles, CA 90058-1826 Phone: (800) 421-6144 EXT. 7740 Fax: (800) 458-7496 crlaurence.com Email: showers@crlaurence.com 11M0260
More informationOPERATION AND MAINTENANCE INSTRUCTIONS AVK UNDERGROUND FIRE HYDRANT
1. INTRODUCTION Operation and maintenance manual for the series underground CLEARWAY fire hydrant 1 of 7 The designs, materials and specifications shown are subject to change without notice due to our
More informations tops & holder s Absolute Door Control and Entire Opening Protection
check mate s tops & holder s Absolute Door Control and Entire Opening Protection Copyright 2001-2018, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
More informationSTEP 1: FIND IMAGE AND/OR PART # OF TRIM THAT YOU PURCHASED
INSTALLATION INSTRUCTIONS Brass Trims for Thermostatic Valve (J-TH34/J-TH) Confidence from start to finish. STEP 1: FIND IMAGE AND/OR PART # OF TRIM THAT YOU PURCHASED (THIS IS WHAT FINISHED PRODUCT WILL
More information