Bonomi Eugenio S.p.A. A424_0911
|
|
|
- Ada Shelton
- 5 years ago
- Views:
Transcription
1 Network Rail Series 2 Specification Bonomi Group Product Summary
2 25kV OMNIA CANTILEVERS The Omnia range are pre-assembled Cantilevers which are proven in European Railways and offer key efficiencies in OLE: Reduced installation time Up to one third of traditional systems Strong Aluminium Alloy structure for improved system stability Highly adjustable nature delivering installation and maintenance efficiencies Operating at 155 mph STANDARD CANTILEVER ASSEMBLIES Series 2 Ref. Part n Push-off & Pull-off Arrangements Mast Attachment 2/C99/001/00* 2/C99/001/10* L03120 L03124 OMNIA Aluminium standard cantilever for straight track OMNIA Aluminium standard cantilever For MID-POINT arrangement Series 2 Ref. Part n Push-off & Pull-off Arrangements Portal Attachment 2/C99/006 L03120 OMNIA Aluminium standard cantilever for straight track
3 OVERLAPS CANTILEVER ASSEMBLIES Series 2 Ref. Part n Push-off & Pull-off Arrangements C99/002/001 to 005 L03120 For insulated and uninsulated Overlaps in-running Series 2 Ref. Part n Push-off & Pull-off Arrangements C99/002/006 to 010 L03123 insulated and uninsulated Overlaps in-running with reach over arm
4 Series 2 Ref. Part n Push-off & Pull-off Arrangements 2/C99/003/*0* L03121 For insulated and uninsulated Overlaps out-of-running REDUCED ENCUMBRANCE CANTILEVER ASSEMBLIES Series 2 Ref. Part-Dwg n Push-off & Pull-off Arrangements 2/C99/004/00* L03127 L03128 Reduced encumbrance cantilever assembly Encumbrance mm Reduced encumbrance cantilever assembly Encumbrance mm
5 BRIDGE FACE CANTILEVER ASSEMBLIES Series 2 Ref. Part-Dwg n Push-off & Pull-off Arrangements 2/C99/007/*** L03127 ALLOCATION TABLE FOR REDUCED ENCUMBRANCE & BRIDGE FACE CANTILEVER ASSEMBLIES REGISTRATION ARMS (STANDARD & SPECIAL TYPES) Reduced encumbrance bridge face cantilever assembly Spans 26m to 33m Special registration arm types, covering encumbrance from See special types within table below
6 EARTHED CANTILEVER ASSEMBLIES FOR NEUTRAL SECTION Series 2 Ref. Part-Dwg n Push-off & Pull-off Arrangements 2/C99/005/00* L03129 Neutral section cantilever assembly Encumbrance 1300mm
7 DROPPERS Network Rail Ref Bonomi Group Drawing n Bonomi Group Part n Description C99/401/002 BE Flexible current carrying dropper with dropper rope 12 sqm Between AC sqmm CONTACT WIRE EN NR 1/148/440 - NR 1/448/438 - NR 1/148/373 & Massenger wire from Ø 10,0 to Ø 13,0 mm C99/404/ C99/404/002 BE C99/404/ Adjustable bridge dropper L= 140 mm For AC sqmm CONTACT WIRE EN NR 1/148/440 - NR 1/448/438 - NR 1/148/373 Adjustable bridge dropper L= 268 mm For AC sqmm CONTACT WIRE EN NR 1/148/440 - NR 1/448/438 - NR 1/148/373 Adjustable bridge dropper L= 418 mm For AC sqmm CONTACT WIRE EN NR 1/148/440 - NR 1/448/438 - NR 1/148/373 CLAMPS & CONNECTORS Network Rail Ref Bonomi Group Drawing n Bonomi Group Part n Description C25/100 M03014 GM bolted Jumper Clamp Between HD-Copper 19/3.2 - Ø16 mm and Flexible Copper 19/9/0,71 Ø 10,6 or Copper Messenger Ø 10,5 mm C25/101 M03015 GM bolted Jumper Clamp Between Flexibles Copper 19/9/0,71 Ø 10,6 And / Or Copper Messenger Ø 10,5 mm
8 C21/544/ C21/544/002 BE C21/544/ Conical anchor clamp for Messenger wire For Messenger Wire Copper Conductor 19/2,1 Ø 10,5 mm Conical anchor clamp For Contact Wire 107 Ø 12,3 mm Conical anchor clamp For Contact wire 120 Ø 13,2 mm L TCA GL02142TCA00 Feeder suspension string For Hornet Ø mm & Cockroach Ø 21,1 mm conductors Short clamp attachment TC Suspension clamp M01766 L TCB GL02142TCB00 Feeder suspension string For Cockroach Ø 21,1 mm & Centipede Ø 26,5 mm conductors Short clamp attachment TC Suspension clamp M01766 B72/001 - subassembly B72/002 - subassembly L RA L RB GL02142RA000 GL02142RB000 Feeder suspension string For Hornet Ø mm & Cockroach Ø 21,1 mm conductors Long clamp attachment R Suspension clamp M01896 Feeder suspension string For Cockroach Ø 21,1 mm & Centipede Ø 26,5 mm conductors Long clamp attachment R Suspension clamp M01896 M01766 GM Suspension Clamp For aluminium conductors Hornet Ø mm & Cockroach Ø 21,1 mm M01896 GM Suspension Clamp For aluminium conductors Cockroach Ø 21,1 mm & Centipede Ø 26,5 mm C99/620 L03022 GL Earthing suspension clamp assembly For Aluminium cables from Ø 15,0 mm to Ø 18,0 mm Earth suspension clamp M03017 Clamp coupling screw LT0990 C99/800 LT3153 GLT Designated Earth Point Assembly
PARALLEL GROOVE CLAMPS
PARALLEL GROOVE CLAMPS 06 6 PARALLEL GROOVE CLAMPS 95 Contents General... 96 Parallel groove clamp with serrated grooves, forged, for aluminium based conductors... 98 Parallel groove clamp for earthwires
Installation of AF-Neutral Section Insulators. 01/07/ Installation of AF Neutral Section
Installation of AF-Neutral Section Insulators page 1 Installation of HS25 Section Insulator Flury-Adjustment JIG with complete tools item no 655.900.001 page 2 Neutral Section 25 kv AC Neutral Section
technical sheet facade stabilization anchors shoulder bolt type Description
Description shoulder bolt type page: 1/5 Stabilization anchors must be installed in buildings over 130 (150 or 45m in Canada), with the first on being no more then 50 from the top of the building. The
Cutting. Contents. Cutting. Cutting Introduction B.2 B.1. Cutting tools B.4. Front cable cutter B.6. Cable cutter B.7. Cutting and releasing tools B.
Contents Introduction.2 tools.4 Front cable cutter.6 Cable cutter.7 and releasing tools.9 Mounting rail cutter.11 Sheet holes.12 Electrician s knives/electrician s scissors.14.1 Introduction A large number
NSP/004/107 (OHI 7) Guidance on the selection of conductor jumpers and non-tension connections
Version:- 3.0 Date of Issue:- September 2015 Page 1 of 12 NSP/004/107 (OHI 7) Guidance on the selection of conductor jumpers and non-tension connections 1. Purpose The purpose of this document is to provide
Feed-Through & Multi-Connection Spring Clamp
Feed-Through & Multi-Connection Spring Clamp CSC4T2-2 CSC6T1-2 ADL2.5 42 x 10 45 x 94 mm 50 x 79. 13 mm 1 4 spring clamps 3 spring clamps 4 spring clamps & 4 slots for interconnection 22-12 AWG 0.5-4 sq.mm.
Through and Ground Conductor Terminal Blocks 290 Series
11 474 Through and Ground Conductor Terminal Blocks 290 Series 0.34-1. mm"f-st" 0.31-1 mm"s" 1 00 V/6 kv/3 2 1 AWG 22-16"f-st" AWG 22-18"s" I N 13. A Terminal block width mm / 0.197 in 0.34-1. mm"f-st"
SDCS-03 DISTRIBUTION NETWORK GROUNDING CONSTRUCTION STANDARD (PART-II) OVERHEAD NETWORK GROUNDING. Rev. 01
SEC DISTRIBUTION GROUNDING STANDARD SDCS-03 Part-II Rev.01 SDCS-03 DISTRIBUTION NETWORK GROUNDING CONSTRUCTION STANDARD (PART-II) OVERHEAD NETWORK GROUNDING Rev. 01 This specification is property of SEC
INSTALLATION INSTRUCTIONS FOR HAND OPERATED MODELS: 170, 171-R, 171-N, 172, 260
INSTALLATION INSTRUCTIONS FOR HAND OPERATED MODELS: 170, 171-R, 171-N, 172, 260 I. SUSPENDED INSTALLATIONS NOTE: MODEL 260 FENSTEEL TRACK IS ASSEMBLED IN THE SAME MANNER AS DESCRIBED BELOW WITH THE EXCEPTION
Sport-Thieme Safety Aluminium Mini Training Goal
Assembly instructions Art.-Nr.: 116 3881 Sport-Thieme Safety Aluminium Mini Training Goal 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com Phone: +49 53
Technical data. Contact material: with double break or 2 NC contacts Switching system: A IEC snap action with positive break NC contacts
Emergency pull-wire switches ZS 71... NA Technical data Contact variations * 63 mm for version 200 N pre-tensioning force To EN 418/IEC 60947-5-5 Metal enclosure 2 contacts Integrated emergency-stop button
ULC STANDARDS TECHNICAL WORK PROGRAM (WTO) Last modified on:
CAN/ULC-60743-14 Live Working -- Terminology for Tools, Devices and Equipment Stability Date 29.240.20 29.260.99 29.260 CAN/ULC-60832-09 Insulating Poles (Insulating Sticks) and Universal Tool Attachments
Roll No. :... Invigilator s Signature :.. CS/B.TECH(EE)/SEM-5/EE-502/ POWER SYSTEM-I. Time Allotted : 3 Hours Full Marks : 70
Name : Roll No. :.... Invigilator s Signature :.. CS/B.TECH(EE)/SEM-5/EE-502/2011-12 2011 POWER SYSTEM-I Time Allotted : 3 Hours Full Marks : 70 The figures in the margin indicate full marks. Candidates
Feed-Through & Multi-Connection Spring Clamp
Feed-Through & Multi-Connection Spring Clamp FEED-THROUGH CSC2.5T CSC4T CSC6T These terminal blocks offer a time saving alternative to the popular screw clamp connection. They can be mounted on 3 DIN rails.
25 mm 2 stranded 35 mm 2 flexible Aluminium cable
6 A multitude of cables and conductors of the most diverse types and versions are used to connect electrical and electronic components. The cables and conductors must be accurately prepared depending on
A new approach to the design and planning of catenary systems for high-speed rail
A new approach to the design and planning of catenary systems for high-speed rail Den Innovative Jernbane- The Innovative Railway May 9, 2012 Beat Furrer / Furrer+Frey AG / 120508 1 Presentation of Furrer+Frey
PRECISA 201 page 41. Torches MIG/MAG page 42 Wear parts for MIG/MAG torches page 43
CHAPTER welding WELDING Transformer technology power sources EASYMIG 0 / / / DUAL page MAXISTAR 0 M / 00 M / 0 T / 0 T page BLUMIG C / C / C / C / C / C page BLUMIG 0 S / S / 0 S / 0 S page TF 00 / 00
The shield (screen) connecting system from WAGO offers high electrical and mechanical safety for very flexible applications.
The shield (screen) connecting system from WAGO offers high electrical and mechanical safety for very flexible applications. Shield (Screen) Connecting System VOLUME 1 Shield (screen) connecting system
Han High Temp. Description. Design overview. Han High Temp connectors remain robust and reliable for their entire lifespan!
Han High Temp Description Han High Temp is a new product series that is based on our well-established Han B and Han E series. We used high-quality materials with wide temperature ranges to produce connectors
Sport-Thieme Safety Aluminium Mini Training Goal
Assembly instructions Art.-Nr.: 116 3852 Sport-Thieme Safety Aluminium Mini Training Goal 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com Phone: +49 53
6. Internal lightning protection
6. Internal lightning protection 6.1 Equipotential bonding for metal installations Equipotential bonding according to IEC 60364-4- 41 and IEC 60364-5-54 Equipotential bonding is required for all newly
Contents. Han Hv ES / Han Hv E Technical characteristics Han Hv ES Technical characteristics Han Hv E Han 3 Hv ES
Contents S / Page Technical characteristics S............................. 04.10 Technical characteristics.............................. 04.11 3 S.............................................. 04.12 3...............................................
Datasheet - ZQ Pull-wire emergency stop switches / ZQ 700
Datasheet - ZQ 700-02 Pull-wire emergency stop switches / ZQ 700 Preferred typ thermoplastic enclosure one-side operation / wire up to 10 m long Release push button Position indicator Large wiring compartment
Ω BLOCK. Ω BLOCK - Distribution Blocks
Ω LOK Ω LOK - Distribution locks The TEKNOMEG Ω LOK range is quite complete and includes terminal board distribution units, both single block and compact. This allows making distribution units from up
Premoulded cable joint SMPGB
Premoulded cable joint SMPGB 362-420 Premoulded for safe and easy installation Active pressure Reliable Joint bodies routinetested according to IEC before delivery Bolt connector technology Compact joint
TRANSIT SYSTEMS CATALOG 2017
PHOENIX MINING & TRANSIT SYSTEMS Since 1985 Serving the needs of transit systems worldwide for over 30 years TRANSIT SYSTEMS CATALOG 2017 Revised and Printed JANUARY 2017 All specifications in this catalog
LED Driver Compact fixed output. Udriver LC 25/30/35/40W 600/700/800/900mA fixc SC ADV ADVANCED series
Udriver LC 5/3/35/4W 6/7/8/9mA fixc SC ADV ADVANCED series Product description Fixed output LED Driver Can be either used build-in or independent with clip-on strain-relief (see accessory) Constant current
CONTENTS AND SERVICES
CONTENTS 1 LV MAINS AND SERVICES 1.1 Scope 1 1.2 Definitions 2 1.3 Introduction 3 1.4 Design Information 4 1.5 Construction Information 6 Appendix A GA Drawings and Materials Mains 11 Appendix B GA Drawings
Collection of standards in electronic format (PDF) 1. Copyright
Collection of standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance
Ceiling mounting application, U support and bracket. Standard mounting of a cable tray with support, type US.., and suitable support bracket, type AW.
Cable tray system RKS-Magic 35 and 60 mm Cable trays Type RKS-Magic Side height: 35, 60 mm Surface: FS Fittings: According to side heights Connecting parts According to side heights VDE testing According
Field Instruction. Induced voltages can occur in overhead lines, underground cables, or in switchyards.
8.3 Induced Voltage Purpose The purpose of this instruction is to provide awareness of Electrostatic and Electromagnetic induced voltages and the method required to reduce or eliminate it. An induced voltage
Connect - Contact - Control. Connectors. Short Form Catalogue
Connect - Contact - Control Connectors Short Form Catalogue Components for electrical engineering Schaltbau connectors nowadays ensure good connections in all areas of electrical engineering. The product
Sole Fitness E95 Elliptical Trainer TurnKey Delivery and Setup Training
Sole Fitness E95 Elliptical Trainer TurnKey Delivery and Setup Training Delivery Requirements Ground delivery Inside delivery to customer-specified location Unpack and assemble machine, and remove packing
HQ series the powerful little connectors
HQ series the powerful little connectors HQ series the powerful little connectors A small size ut quite ig. The electrical values speak for themselves. The HQs use the proven HE and HD crimp contacts as
Setting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
Male Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique
SCHEDULE OF WORK. Balmer Lawrie Co. Ltd. PRICED BID (PART-II) MMLH
SCHEDULE OF WORK Supply, Installation, Testing & Commissioning (SITC) of 33KV Electrical Substation for Multi Modal Logistics Hub at Visakhapatnam, Andhra Pradesh. Tender No. MMLH /HTELEC/PT /18 dated
GROUND MOUNTING SYSTEM INSTALLATION MANUAL
GROUND MOUNTING SYSTEM INSTALLATION MANUAL JIANGYIN TITANERGY CO.,LTD APRIL 2016, RE V 1 Using the special splice kits to connect Titan Solar's aluminium HD rail makes installation easier,more flexible
METRIC LIGHTNING PROTECTION PRODUCTS
Section 11 Metric Description... Page # 11.1 Taper Pointed Air Rods, Air Terminals & Attachments...270 11.2 Saddles & Attachments...271-272 11.3 s...273-275 11.4 Attachments...276-279 11.5 Clamps...280
Switching relay terminal block; Relay with 1 changeover contact (1u); with miniature switching relay
relay - Item No: 89-304 Switching relay terminal block; Relay with changeover contact (u); with miniature switching relay Item No: 89-304 Switching relay terminal block; Relay with changeover contact (u);
INSTALLATION RECOMMENDATIONS For The Con-Tech ODYSSEY Line Voltage Flexible Track System
INSTALLATION RECOMMENDATIONS For The Con-Tech ODYSSEY Line Voltage Flexible Track System IMPORTANT SAFETY INSTRUCTIONS: Read all instructions before installation. Save these instructions for later use.
Operating Manual Multi-Spot M22AL CD Stud Welding Machine
Operating Manual Multi-Spot M22AL CD Stud Welding Machine EL900016 January 2014 by Vehicle Service Group. All rights reserved. CO8904 Rev - 1/31/14 OPERATION MANUAL Read this manual carefully before using
HUSH MINI by David Trubridge Ltd.
Overall Dimensions - Model: 1034-B (240V) 1000 mm 1000 mm 400 mm 1 Contents (not to scale) Please double check all components are present and quantities are correct before beginning assembly x1 Top Panel
Ground Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
GENERAL INSPECTION AND MAINTENANCE PROCEDURE FOR FIXED HF ANTENNA SYSTEMS
Bulletin 7591056,Revision A 1. SCOPE GENERAL INSPECTION AND MAINTENANCE PROCEDURE FOR FIXED HF ANTENNA SYSTEMS It is the intent of this procedure that all equipment and components of the antenna system
FABA. Installation Instructions. Conductor Bar System. Publication #FABA-03 3/1/04 Part Number: Copyright 2004 Electromotive Systems
FABA Conductor Bar System Installation Instructions Publication #FABA-03 3/1/04 Part Number: 005-1062 Copyright 2004 Electromotive Systems 1S 100 Z Installation Instructions Contents: Basic Diagram - -
Operating tools. with partially insulated shaft Type 1, 2 and 3 in set
Accessories 40 Accessories 41 Operating Tools 42 45 Operating Tools WINSTA 46 47 Disconnection Tools 48 Cable Strippers 500 Wire Strippers 501 Cable Cutters 502 Crimping Tools 502 503 Test and Measurement
PHOENIX MINING & TRANSIT SYSTEMS
PHOENIX MINING & TRANSIT SYSTEMS Since 1985 TRANSIT SYSTEMS CATALOG 2015 All specifications in this catalog are subject to change without notice. PHOENIX MINING & TRANSIT SYSTEMS P.O. Box 14179 Cincinnati,
MOBILE POLE FOR A HAM RADIO ANTENNA By Cordell Vail KE7ZBQ
MOBILE POLE FOR A HAM RADIO ANTENNA By Cordell Vail KE7ZBQ I wanted to build a mobile pole for my 2 meter J-pole Ham Radio antenna so I could take it with me anywhere I needed to go in an emergency. Here
The theoretical concept
Overview shield connection terminals he theoretical concept Part 1 of the VDE 0133 standard specifies the required equipotential bonding for the electrical components of a machine. he aim is to prevent
Sport-Thieme. Full-Size Goal. Assembly instructions. 7,32x2,44 m, Portable
Assembly instructions Sport-Thieme 7,32x2,44 m, Portable Art.-Nr.: 115 0793 257 7207 Full-Size Goal 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com Phone:
PHASED OUT. LED Driver Compact fixed output. Driver LC 20W 500/700mA fixc SR SNC ESSENCE series
Product description Independent driver with strain-relief housing Extra flat housing for constrained installation conditions (small ceiling cut outs and low ceiling voids) Max. output power W Output current
LED Driver Compact fixed output
Driver LC 13/15W 3/35mA fixc SR SNC ESSENCE series Product description Independent driver with strain-relief housing Extra flat housing for constrained installation conditions (small ceiling cut outs and
Sicat Master. Engineering of overhead contact line systems. siemens.com/rail-electrification
Sicat Master Engineering of overhead contact line systems siemens.com/rail-electrification When engineering overhead contact lines for mass transit and main line railways, we combine the calculations of
Trunkingxxxxxx. in aluminium. Industrial Catalogue
93 Trunkingxxxxxx in aluminium Industrial Catalogue 151 TRUNKING 93 IN LUMINIUM Trunking 93 in aluminium To mount switches and sockets in environments requiring neat finishing Free choice of switches and
HV SYSTEMS. Prysmian HV Systems Product Range 66kV & 132 kv
HV SYSTEMS Prysmian HV Systems Product Range 66kV & 132 kv Prysmian HV Product Range Version: 06/10 The History of Cables 66kV Copper Conductor XLPE Insulated Cables Prysmian Cables & Systmes Ltd is part
2/15/2015. Current will always try to return to its source. In order for there to be current, there must be a complete circuit
Current will always try to return to its source In order for there to be current, there must be a complete circuit Current will take as many paths or circuits available to it to return to the source The
FENCING ASSEMBLY INSTRUCTIONS
1 SET POSTS Determine the post locations, 93" or 117" centers. Post spacing is flexible and can be decreased for terrain, etc. All posts should be set in concrete appropriate to local conditions.* POST
Adhesive Air Terminal Bases. Universal Surface Bases. Offset Parapet Air Terminal Bases. Section 3.2. Air Terminals & Air Terminal Bases
equipment catalog 3-5 Bases Adhesive Bases Used for mounting on membrane or built-up roofs. Mounted with adhesive or plastic roofing cement. The cast base has a mechanical conductor connector. BS-C-3/8ID-ADH-AT
SY CONTROL FLEXIBLE PVC INSULATED, BEDDED AND SHEATHED WITH GALVANISED STEEL BRAID
ISSUE DATE: 05/02/2016 PAGE: 1 Manufactured generally to BS EN 50525-2-11:2011 Plain Annealed Flexible Copper Conductors / PVC Insulated / PVC Bedding / GSWB (Galvanised Steel Wire Braid) / PVC Sheathed.
Jumper cable. Feeder cable + connector. Cable clamp. Grounding kit
Mobile Networks 1 Jumper cable Feeder cable + connector Cable clamp Grounding kit 2 28 Superflexible and Extraflexible Cables Draka superflexible RFF cables and extraflexible RFE cables offer the most
Easy Step by Step Manual
Easy Step by Step Manual Teletower Mini XL Wall-Floor installation The tower packages #1-#2-#3 Open Base Package #1 for the main tower parts. Here you see the three tower tubes (H-Head, M-Middle, F-Feed)
Wildeck Overhead Safety Gate. General
Wildeck Overhead Safety Gate General Safe and efficient movement of palleted material to and from your mezzanine is a requirement, and the Wildeck Overhead Safety Gate delivers every time. Workers on the
Mini Contactors. Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks. Interface Contactor Relays. Mini Contactors 10 Auxiliary Contact Blocks
Mini Contactors Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks Interface Contactor Relays Mini Contactors 10 Auxiliary Contact Blocks Mini Contactors With Fast On Tab Connectors 12 Mini Contactors
3M Electrical Markets Division 3M Cold Shrink Silicone Rubber Splices QS-III. Easy Installation. High reliability.
3M Electrical Markets Division 3M Cold Shrink Silicone Rubber Splices QS-III Easy Installation. High reliability. power cable splicing Revolutionizing with Cold Shrink The 3M Cold Shrink Silicone Rubber
Earth Clamp / Ground Clamp Earth rod Clamp / Earthing rod Clamp Ground Clamp / Grounding Clamp
Earth Clamp / Ground Clamp Earth rod Clamp / Earthing rod Clamp Ground Clamp / Grounding Clamp Copper alloy clamps are made from Bronze / Gunmetal / High Strength Copper Alloy body which give strong resistance
LED Driver Compact fixed output
Driver LC 50/60W 1200/700/1400mA fixc SR SNC ESSENCE series Product description Independent fixed output LED Driver Constant current LED Driver Output current 1,200, 700 or 1,400 ma Max. output power 50
Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution
Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm
Snow Scale SSG. Snow measurement system. Assembly instructions Sommer GmbH. All rights reserved.
Snow Scale SSG Snow measurement system Assembly instructions 2015-01-30 Sommer GmbH All rights reserved. 1 The Copyrights for this manual are exclusively at the company Sommer GmbH A-6842 Koblach This
MevaDec. Contents. Ref. No. Description / Application Product m² list kg
Ref. No. Description / Application Product m² list kg This product list includes all parts necessary for most applications. For parts required for special applications, please refer to the MEVA price list.
Lightning Protection Materials
Lightning Protection Materials LIGTNING PROTECTION MATERIAL INSTALLATION SYSTEM KEY 1. Roof Conductors 2. Aluminium Ropray Conductor(B.C) 3. PVC Covered Conductor 4. Soild Circular Conductor 5. Copper
SDCS-03 DISTRIBUTION NETWORK GROUNDING CONSTRUCTION STANDARD (PART-I) UNDERGROUND NETWORK GROUNDING. Rev. 01
SDCS-03 DISTRIBUTION NETWORK GROUNDING CONSTRUCTION STANDARD (PART-I) UNDERGROUND NETWORK GROUNDING Rev. 01 This specification is property of SEC and subject to change or modification without any notice
Holiday Detector mod. 284/35KV
Holiday Detector mod. 284/35KV Telemagnetica S.r.l. Via Teocrito, 36-20128 Milan - Italy Tel: +39-022552900 - Fax: +39-022553097 e-mail: info@telemagnetica.com - http: January 2013 BR-284-35KV-ENG-00 Pag.
CABLE TRUNKING SYSTEMS
CABLE TRUNKING SYSTEMS CONTENTS CABLE TRUNKING STRAIGHT LENGTHS 2 BEND TOP COVER 5 BEND INSIDE COVER 7 BEND OUTSIDE COVER 9 TEE TOP COVER 11 CROSS TOP COVER 14 REDUCERS 15 OFFSET TRUNKING 16 CABLE TRUNKING
Main Components. Pipe and Bolt Threading Machine 300/300A. Early Style. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine 00/00A Main Components Early Style 0 0 * 0 0 0 For Information on Cutters, Die Heads and Reamers SEE INDEX Ref. 0 0 Catalog 0 00 00 0 0 0 00 0 0 0 0 0 0 0 00 0 00 00 00
LED Driver Constant voltage
Driver LCU 100/96W 12/24V IP20 EXC EXCITE indoor IP20 series Product description LED Driver Universal input voltage range Constant output voltage Push terminals for simple wiring Nominal life-time up to
LED Driver Compact fixed output
Driver LC W 350/500/700mA fixc SR SNC2 ESSENCE series Product description Independent LED Driver with cable clamps output power W Output current 350, 500 or 700 ma For luminaires with M and MM as per EN
Holiday Detector mod. 184/45KV
Holiday Detector mod. 184/45KV Telemagnetica S.r.l. Via Teocrito, 36-20128 Milan - Italy Tel: +39-022552900 - Fax: +39-022553097 e-mail: info@telemagnetica.com - http:// January 2013 BR-184-14-45KV-ENG-00
Hy-gain. Method 1 : Completely assemble the antenna on the ground then hoist it into position using a setup as shown in Figure 1.
Hy-gain The Hy-Gain TH6-DXX "Super Thunderbird" is a 6-element beam designed to operate on 10, 25 and 20 meters. It has four active elements on 10-meters and three active elements on 15 and 20 meters.
LED Driver Constant voltage
Driver LCU 60W 12/24V IP20 EXC excite series Product description LED Driver Universal input voltage range Constant output voltage Push terminals for simple wiring Nominal life-time up to 50,000 h (at ta
SLIDING DOOR SYSTEM: ASSEMBLY INSTRUCTION SLIDING DOOR SERIES AIR-B S42 SYNCHRON DRIVE 1. Version 8 (Up to date: May 2012)
SLIDING DOOR SYSTEM: ASSEMBLY INSTRUCTION SLIDING DOOR SERIES AIR-B S42 SYNCHRON DRIVE 1 Version 8 (Up to date: May 2012) 01.03.1.b 01.03.1.c CONTENT General information and tools_ page 03 Accessories_
Micro Contactors. Micro Contactor Relays 10. Micro Contactors 11. Micro Contactors With Solder Pins 12. Coil voltages 12. Micro Reversing Contactor 13
Micro Contactor Relays 10 Micro Contactors 11 Micro Contactors With Solder Pins 12 Coil voltages 12 Micro Reversing Contactor 13 Technical Data 14 Dimensions 18 D946E 9 Micro Contactor Relays 4-pole AC
Overall Dimensions - Model: 1018-A. 575mm. 1400mm. 600mm. 2000mm
Overall Dimensions - Model: 1018-A 1400mm 575mm 600mm 2000mm Contents (Not to scale) Please double check all components are present and quantities are correct before beginning assembly x8 Straight Felt
Installation Guideline RADIAFLEX Cables Edition J
Installation Guideline RADIAFLEX Cables Edition J Table of Contents 1 Vehicles and Machines... 3 2 Tools... 4 2.01 Toolbox... 4 2.02 Preparation and Stripping Tools for CELLFLEX cables... 5 2.03 Hoisting
tel +27 (0) ı fax +27 (0) ı ı Preformed Line Products South Africa
D 30 Line Splice General Recommendations Conductor Splices are designed as a single component outer-layer assembly for Sub-EHV only. Joining: On all-alluminium, aluminium alloy, and copper conductors of
3RA13, 3RA14 Contactor Assemblies
RA, RA Contactor Assemblies RA Contactor Assemblies for Wye-Delta Starting RA complete units,... kw Siemens AG 0 Overview These RA contactor assemblies for wye-delta starting are designed for standard
DATA SHEET Selectable AC transducer TAS-311DG
DATA SHEET Selectable AC transducer Measuring on AC networks Class 0.5 (IEC688) measurement Supply/measur. voltage up to 690 V Easy configuration via PC interface possible DEIF A/S Frisenborgvej 33 DK-7800
Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header
Pluggable PCB terminals and headers Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header System features plug in system is simple
Series P. Applications
Ratings 25 800 VA Voltage Primary 230 / 400 / 460 V range Secondary 6 / 12 V 12 / 24 V 24 / 48 V 115 / 230 V Voltage selection by means of metal connection bridges, offering the full rated power at any
Swifts cable ladder supports
heavy duty cantilever arms Heavy duty cantilever arms enable horizontal runs of cable ladder to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel. They are suitable for
Grounding and Bonding
Grounding and Bonding 2017 Communications Academy Joe Blaschka Jr., PE Grounding/Bonding What is it? Why do we do it? What does the National Electrical Code say? What about fixed locations? What about
Reference Number PDS 07 (RIC Standard: EP SP)
Discipline Engineering Standard NSW Category Electrical Title Reference Number PDS 07 (RIC Standard: EP 12 10 00 20 SP) Document Control Status Date Prepared Reviewed Endorsed Approved Jan 05 Standards
Amphenol RF UHF. UHF Connector Series UHF. Description. Features/Benefits. Applications
Amphenol RF 136 Connector Series Description Invented in the 1930 s by an Amphenol Engineer named E. Clark Quackenbush, coaxial connectors are general purpose units developed for use in low frequency systems
Copyright 2005 Valmont Industries, Inc.
Hose Drag TOPIVIEW OF CART Universal 1 Left Guidance Support (4" H.D.) 1732080... Left Guidance Sumort.. 16". H.D.)... 1732138 2 Right Guidance Support (4" H.D.)... 1732081 Right Guidance Support (6" H.D.)...
INSTALLATION INSTRUCTIONS FOR HAND OPERATED SILENT STEEL ADC HEAVY DUTY CURTAIN TRACK MODELS: 280, 281, 282, 280-A, 283-N, 283-R
INSTALLATION INSTRUCTIONS FOR HAND OPERATED SILENT STEEL ADC HEAVY DUTY CURTAIN TRACK MODELS: 280, 281, 282, 280-A, 283-N, 283-R I. SUSPENDED INSTALLATIONS 1. Lay the two track halves on the floor with
02/11/2015
Smart range with Removable Terminal blocks XD26RBT Smart Part number 88974561 Designed for industrial, commercial, medical and paramedical machines Faster maintenance process which improves the machine
Glide Switches 600 Series
Installation Instructions Glide Switches 600 Series These instructions are for 600 Series Glide Switches, as used with 325 Series Patented Track rail. See the Index to locate the appropriate pages for
Tools for crimp contacts
Tools for crimp termination D-Sub-S, D-Sub-HD, DIN 41 612 Identification Service crimp tool standard contacts high density contacts Part No. 09 99 000 0175 09 99 000 0596 HARTING- Crimp tool for 500 bandoliered
Circular Column Formwork Circo. Contents. Product list. Ref.-No. Description / Application m² kg
Product list This product list includes all parts necessary for most applications. For parts required for special applications, please refer to the MEVA price list. Dimensions are in centimetres (cm) unless
MIG/MAG Welding Torch ABIMIG 645 W liquid-cooled
MIG/MAG Welding Torch ABIMIG 645 W liquid-cooled C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M ABICOR BINZEL. The right welding torch for every job! BINZEL air cooled welding torches incorporate