AA Digital Prototyping Lab Brief
|
|
- April Shelton
- 6 years ago
- Views:
Transcription
1 AA Digital Prototyping Lab Brief As part of the larger AA 2020 plan the Digital Prototyping Lab is bound for an important reconfiguration in terms of facilities, equipment and staff. The lab is a rapidly evolving department that provides key facilities necessary for architectural education and research in digital technologies. Increased demand from students and an evolving academic brief which relies heavily on digital fabrication technologies has at times overwhelmed the lab in its current state. The new lab will have 3 key features: 1.- It will be self-contained and have occupational flexibility. 2.- It includes a large fabrication yard, connecting to the other workshops. 3.- It will almost triple its current size and include professional grade equipment. It is located in the basement from 36 to 39 Bedford Square, enabling the lab to house new equipment in a more organized and secure manner, ensuring students have proper working facilities and allowing staff to work in a more comfortable and optimum manner while increasing its opening hours. By means of the 2020 General Workshop plan it will allow for staff and students to communicate through the Fabrication Courtyard with the other workshops at the AA (wood, metal and model workshop). The new DPL will see the addition of new and exciting technologies such as SLA resin and SLS nylon 3Dprinting, metal and stone cutting capabilities, an electronics corner to solder and create end effectors and actuators, faster and larger laser cutters, a more effective Robotic fabrication cell, and a bigger assembly and teaching space.
2 The Digital Prototyping Laboratory Cutting edge equipment and facilities
3 REVISIONS: Morwell Street MODEL MAKING PHASE 1A WOOD & METAL WORKSHOP DPL WORKSHOP YARD No.39 No.38 No.37 No.36 No.35 No.34 No.33 No.32 Bedford Square BASEMENT FLOOR PLAN KEY: Basement Existing Plan NOTES: Phase 1B boundary Refer to the following drawings for proposed sections and elevations: Section CC: Drawing 023 Section DD: Drawing 024 Section TT: Drawing 025 A: Layout revised to 1:100. B: Site outline revised and section lines indicated for planning application Tender issue C: Site boundaries updated for Tender Issue 2 D: Revised for IT & Server Cooling application E: Revised for phase 1B re-tendering F: Bookshop updated. Issued for construction - THE ARCHITECTURAL ASSOCIATION DRAWING NO: 002F & A r c h i t e c t s EXISTING DATE: Current workshop facilities at the AA 89 / 91 BAYHAM STREET LONDON NW1 0AG Telephone: Facsimile: SLE: ww@wrightandwright.co.uk web: BASEMENT PLAN 1:200@A3,1:100@A1
4 SLS Formiga P100 Micro Blaster Sieving Mixing SLA Printers 660 PRO sink EXISTING DPL 90M 2 PROPOSED DPL 330M 2 DPL Expansion Existing and Proposed Comparative plans of existing & proposed spaces for DPL facilities at the AA
5 Extract Morwell Street Shelving Spray Booth Resins bench/ hood over Shelving Air supply at h/l Air supply at h/l MODEL MAKING PHASE 1A Sink Supply air Air supply at h/l Model saws Pillar drill WOOD & METAL WORKSHOP EXTENDED Vaccuum forming Dust extract Air extract at h/l Air extract at h/l Air extract at h/l Band Saw Local dust extract DEU COURTYARD PHASE 1B WORKSHOP YARD SLS Formiga P100 Micro Blaster Sieving Mixing SLA Printers 660 PRO sink DPL PHASE 1B VAULTS PHASE 1B No.39 No.38 No.37 No.36 No.35 No.34 No.33 No.32 Bedford Square BASEMENT PLAN KEY: NEW STUD PARTITION AS K10 NEW MASONRY AS F10/315 NEW BLOCKWORK AS F10/350 NOTES: LATERAL CONNECTION Basement Refer to 400LC series drawings Proposed Plan Phase 1B Site Boundary REVISIONS: C Digital Prototyping updated Lateral Connection B17 added Ducts adjacent to goods lift updated Phase 1 areas updated D Updated for phase 1 works Drawing scale altered to Planning submission E DP Planing submission boundaries updated F Toilets added to vault of No.38 Bedford Square. G Alterations made to Digital Prototyping Lab in No. 38 Bedford Square. H Alterations to door details Yard layout updated Furniture added to BF.11 J Revised for Phase 1B tender issue K D printing layout revised L Drawing updated for Phase 1B re-tendering M Laser cutting service trench route updated N Drawing coordinated. Opening between Laser Cutting and 3D Printing revised. Phase 1B re-tender. P: D Printing BF.4, Vault 5 and No.38 lightwell layout updated. Courtyard layout updated as per on site measurements. - THE ARCHITECTURAL ASSOCIATION DRAWING NO: P1B/202P O PHASE 1 WORKS DATE: Vault doors updated. Furniture and equipment layout revised. Phase 1B Entire re-tender. workshop facility on completion in June PROPOSED SLE: Construction Issue BASEMENT PLAN 1:100@A1 & A r c h i t e c t s 89 / 91 BAYHAM STREET LONDON NW1 0AG Telephone: Facsimile: ww@wrightandwright.co.uk web:
6 metal/woodworkshop modelmaking new DPL Workshops Phase 1
Fabrication Laboratory. Facilities Committee Meeting January 10, 2018
Fabrication Laboratory Facilities Committee Meeting January 10, 2018 Technology Education 6 12 CURRICULUM REVIEW CYCLE & BOARD UPDATES MAR 17, 2016 DEC 6, 2016 FEB 16, 2017 AUG 14, 2017 NOV 13, 2017 BCTC
More informationMIDDLE SCHOOL EXPLORING TECHNOLOGY (ONE PERSON LAB) New Construction
I. PROGRAM PHILOSOPHY The purpose of this course is to introduce students to the kinds and levels of work performed in todays and our future technological world. Laboratory experiences revolving around
More informationKitchen and Bath Design Planner
2017 Kitchen and Bath Design Planner How to Measure Your Kitchen or Bath for New Cabinets Measuring your space is a critical step in determining your room layout. Having accurate measurements of your kitchen
More informationAdvanced Manufacturing Laboratory to Enhance STEM Learning
2017 ASEE Mid Atlantic Section Spring Conference: Morgan State University, Baltimore, Maryland Apr 7 Paper ID #20824 Advanced Manufacturing Laboratory to Enhance STEM Learning Dr. Kee M Park, Queensborough
More informationIntroduction. From DREAM... Everything starts with an idea or concept in your mind. To DRAWING... The dream is given form by putting it on paper.
1 Introduction Then David gave his son Solomon the plans for the portico of the temple,its buildings, its storerooms, its upper parts, its inner rooms... (1 Chronicles 28:11 NIV) From DREAM... Everything
More informationStep 1: General Customer information
Call: 877-533-5582 Fax: 732-961-5259 Email: sales@woodcabinetsonline.com Website: www.woodcabinetsonline.com Designing the perfect kitchen can be a big task! From matching colors, designing layout, and
More informationProposer: Peggy Carr, Associate Dean (PO Box , 331 Architecture, Voice: x308, Fax: )
Title: DCP and FA Digital Fabrication Laboratory Enhancement Proposer: Peggy Carr, Associate Dean (PO Box 115701, 331 Architecture, mcarr@ufl.edu, Voice: 392-4836x308, Fax: 392-7266) Sponsoring Organization:
More informationUCL CULTURE. Artist Brief 1. Permanent commission for public access areas Destination artwork
UCL CULTURE Artist Brief 1 Permanent commission for public access areas Destination artwork Introduction UCL would like to invite an artist to develop a permanent public art work for the New Student Centre
More informationState College Area School District
State College Area School District The following is a guideline for project design submittals to the Facility Committee of the State College Area School District. During the design process the committee
More informationGRINDERS 86 SAWS 86-90
sawing, cutting & grinding GRINDERS 86 SAWS 86-90 MINI GRINDER Cuts and grinds masonry, concrete and metal. Cuts to a depth of 25mm Can be fitted with surface grinding wheel for facing and grinding Powerful
More informationCourse Outcome Summary
Course Information: Description: Carpentry This class introduces students to basic carpentry practices, such as the use of hand and power tools, measurement, and layout practices. Skills will then be used
More informationWho we are. was born in 2006 as Spin-Off of Politecnico of Torino. Full time people employed 8. Laboratories and facilities 300 m 2
Who we are was born in 2006 as Spin-Off of Politecnico of Torino Full time people employed 8 Laboratories and facilities 300 m 2 Administration and offices 250 m 2 Consolidated Turnover more then 600k
More informationANU MakerSpace Basic Induction & User Agreement
ANU MakerSpace Basic Induction & User Agreement Email: makerspace@anu.edu.au Physics Education Centre, Research School of Physics and Engineering, Bld. 38, Science Rd. The Australian National University,
More informationInstallation Instructions
Installation Instructions Pressure Vessel Measuring Site Installation of a project starts with proper planning. No proper planning is viable without detailed and accurate measurement of the site. A modular
More informationADMINISTRATION DEPARTMENT Plant Management Division. An Inventory of Its State Office Building Drawings
MINNESOTA HISTORICAL SOCIETY Minnesota State Archives ADMINISTRATION DEPARTMENT Plant Management Division An Inventory of Its State Office Building Drawings OVERVIEW OF THE RECORDS Agency: Minnesota. Dept.
More informationInstallation Instructions and Details
Installation Instructions and Details Contents Page General Notes 2 Typical System Perspective 3 Panel, Hardware & Trim Details 4-6 Hardware & Trim Fabrication Details 7-9 Installation Procedures 10-12
More informationSTATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES Articulation Agreement Identifier: BUC 110 (2007-1) Identifier is the postsecondary course prefix followed by Plan-of- Instruction
More informationRECORD GROUP NUMBER 156
DEPARTMENT OF MENTAL HEALTH AND MENTAL RETARDATION HOSPITAL AND SCHOOL FOR THE RETARDED ARLINGTON, TENN. BLUEPRINTS, 1965 RECORD GROUP NUMBER 156 Processed by: David R. Sowell Archival Technical Services
More informationArchitecture Firm ID 439 Contract Design I Due: May 4, 2015
Architecture Firm ID 439 Contract Design I Due: May 4, 2015 Project Objectives: 1) To engage in multi-disciplinary collaboration 2) To understand sustainability as it pertains to building methods, materials,
More information1.1 GENERAL RECORD DRAWING REQUIREMENTS
Page 1 of 5 VILLAGE OF ROMEOVILLE RECORD DRAWINGS CHECKLIST PART I GENERAL Record drawings are required to provide a means of schematic verification that the intent of the approved engineering design has
More informationARCHITECTURE CADD Course Syllabus
6111 E. Skelly Drive P. O. Box 477200 Tulsa, OK 74147-7200 ARCHITECTURE CADD Course Syllabus Course Number: TTC-0880 OHLAP Credit: Yes OCAS Code: 8903 Course Length: 120 Hours Career Cluster: Manufacturing
More informationFWT 415 Furniture Design and Production
FWT 415 Furniture Design and Production COURSE PARTICULARS Course Code: FWT415 Course Title: Furniture Design and Production. No. of Units: 2 Course Duration: One hour of theory and three hours of practicals
More informationDESIGN INSTRUCTIONS TO ARCHITECTS AND ENGINEERS [ ] SCHEMATICS [ ] DESIGN [ ] CONSTRUCTION
DEPARTMENT OF VETERANS AFFAIRS DESIGN INSTRUCTIONS TO ARCHITECTS AND ENGINEERS LOCATION : VAMC, PROJECT TITLE : PROJECT NO. : [ ] SCHEMATICS [ ] DESIGN [ ] CONSTRUCTION DEVELOPMENT DOCUMENTS EQUIPMENT
More informationA. Submit properly identified manufacturer's literature before starting work.
SECTION 10400 IDENTIFYING DEVICES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Labor and materials required for installation of plaque, school name and address numbers, directional signage, signage
More informationProcedure for Obtaining Design Review Committee Approval
Procedure for Obtaining Design Review Committee Approval The Declarations, Restrictions & Covenants of Hallbrook require that approval of the HOA DRC Committee must be obtained prior to commencing certain
More informationIt is expected that this standard will evolve over time; however the use of this standard should remain consistent within individual projects.
1.0 Introduction A computer aided design (CAD) procedure is necessary to ensure that drawings produced by and for the University are readable, understandable, of a consistent standard, and, where necessary,
More information3D Weaving Innovation Centre Disruption to Clothworker South
3D Weaving Innovation Centre Disruption to Clothworker outh Refurbishment works are continuing within the Clothworkers outh building as part of the 3D Weaving Innovation Centre project. The works have
More informationSECTION IDENTIFYING DEVICES
SECTION 10400 IDENTIFYING DEVICES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Labor and materials required for installation of plaque, school name and address numbers, directional signage, signage
More informationInstallation Instructions
Installation Instructions General Notes & Product Information Product profiles & details may vary by installation. Consult architectural drawings, details & specifications before installation of any Marlite
More informationFABRICATION LABORATORY FOR SOCIAL INNOVATION
FABRICATION LABORATORY Our Services... 06 Academy Co-working Lab Contract Services + Shop Who we are referring to Machines Disciplines Partnerships Team We are a group of social entrepreneurs, architects,
More informationImmersive Makerspace Experience
Immersive Makerspace Experience Jason Erdreich, President 9-12 Technology, Engineering, & Design Manalapan High School jerdreich@njteea.org What is a Makerspace? A facility that encourages creative thought
More informationPROGRAMMING SCHEMATIC DESIGN DESIGN DEVELOPMENT CONSTRUCTION DOCUMENTS. room) Scalable bubble diagrams schedules describing programmatic
GENERAL SITE PROGRAMMING SCHEMATIC DESIGN DESIGN DEVELOPMENT CONSTRUCTION DOCUMENTS Scope of work narrative Building code review Description of construction Documentation on drawings as List of applicable
More informationThe Carving Studio. A Woodworker s Paradise
The Carving Studio A Woodworker s Paradise We remodeled this Carving Studio out of an existing garage. The original house was built over 85 years ago. The garage was a mere 10 6 wide, which is not effective
More informationKindly review the following and contact us with any questions or for further details.
Capabilities include but not limited to: Standard Catalog Items Lab cabinets/lab furniture - Powder coated steel cabinets Exhaust Fume Hoods Work benches Tables Server Racks Counter tops Chairs/stools
More informationDESIGN TO BUILD = BUILD TO DESIGN
DESIGN TO BUILD = BUILD TO DESIGN The following represents five days of work from demolition through layout of new flooring and wall frame and cabinetry Paul C. King, RA Associate Professor Department
More informationInstallation Manual. Solid Plastic Toilet Partitions. IN CANADA & AREAS OTHER THAN U.S.A.: IN THE U.S.A.:
Installation Manual Solid Plastic Toilet Partitions Toilet Partitions & Lockers IN THE U.S.A.: Hadrian Inc., 7420 Clover Avenue, Mentor, OH 44060 Telephone: 440-942-9118 Fax: 440-942-9618 U.S. toll free
More information5.7 Plan Documentation and Supporting Information.
5.7 and Supporting Information. In any case where the and Supporting Information for a Development Plan requires the submission of a Site Plan, Overall Plan, Landscape Plan, Building Elevations, Sign Plan
More informationTHIRD SCHEDULE Form of Application For A Revised Disability Access Certificate Article 20E(2)
THIRD SCHEDULE Form of Application For A Revised Disability Access Certificate Article 20E(2) Building Control Acts 1990 and 2007 Application for a Revised Disability Access Certificate Building Control
More informationLockheed Martin 2016 LOCKHEED MARTIN CORPORATION. ALL RIGHTS RESERVED
Lockheed Martin 1 Helping the Future Arrive 2 Our People 115,000 Employees 60,000 Scientists & Engineers 500+ U.S. Facilities Operating in 70 Countries 3 Lockheed Martin 100+ Years of Accelerating Tomorrow
More information3 MATERIALS 4 3D PRINTING
1 TABLE OF CONTENT 2 Introduction... 3 3 Materials... 4 4 3D printing... 4 5 Mixing of PDMS... 5 6 Degassing... 5 7 Baking... 6 8 Taking out the chip and making the holes... 6 9 Assembly & cleaning...
More informationINTERIOR SIGNAGE MANUAL
INTERIOR SIGNAGE MANUAL ➊ Purpose ➋ Procedures ➌ ADA Requirements INTERIOR SIGNAGE MANUAL ➍ Text, Braille, Pictograms and Color ➎ Families of Interior Signage ➏ Mounting Guidelines ➐ Signage Diagrams ➑
More informationKITCHEN. Planning Guide. Includes instructions and grid paper to get you started. WAREHOUSE.COM
KITCHEN Planning Guide Includes instructions and grid paper to get you started. WWW.SURPLUS WAREHOUSE.COM November 18, 014 Start Planning Your Kitchen! In order for us to start the kitchen design process,
More informationSINCLAIR COMMUNITY COLLEGE NATIONAL U.A.S. TRAINING CENTER
GENERAL BUILDING 3 FIRE SUPION SITE PLAN SCALE: " = 20'-0" SPACE HEATING - AIR HANDLING UNIT @ 540 CFH WATER HEATING - WATER HEATER @ 76 CFH EACH GAS CONNECTED LOAD 540 CFH 76 CFH TOTAL 66 CFH AED TV CREDENZA
More informationPRESENT: Dr. George Mannon TUSD Superintendent Dr. Donald Stabler TUSD Deputy Superintendent. Marybeth Spadafino Committee Member: Admin.
MEETING DATE: March 22, 2010 PROJECT: Bert Lynn Middle School Modernization Site Committee Meeting #5 HMC PROJECT #: 3203-037-000 PRESENT: Dr. George Mannon TUSD Superintendent Dr. Donald Stabler TUSD
More informationCommittee Members Present: Sam Berling, Jane Carlin, Ann Gleason, Wade Hands, Sue Hannaford, David Latimer, Janet Marcavage, Lisa Wood.
Minutes of the LMIS Committee for September 22, 2017 Committee Members Present: Sam Berling, Jane Carlin, Ann Gleason, Wade Hands, Sue Hannaford, David Latimer, Janet Marcavage, Lisa Wood. Jada Pelger,
More informationRequest for Information 0026
Request for Information 0026 Detailed, RFIs Grouped by RFI Number SLAC Photon Science Lab (PSLB) Project # 02001.105960 2575 Sand Hill Road Tel: Fax: Menlo Park, CA 94025 RFI #: 0026 Date Created: 4/4/2017
More informationRecommended Qualification Structure for Wood Occupations (Construction) Level 2
Recommended Qualification Structure for Wood Occupations (Construction) Level 2 This structure has been recommended by employers and stakeholders from the above occupational area for organisations to form
More informationPassaic County Technical Institute CARPENTRY II JANUARY 2004
Passaic County Technical Institute CARPENTRY II JANUARY 2004 CARPENTRY II I. DESCRIPTION Carpentry two is a full year course which is intended to introduce the student to the proper and safe use of materials,
More informationMEETING MINUTES. SPS SWS at TT Minor TCF Architecture Project Number: Seattle World School SWS SDAT Workshop 3 2 December 2013
Seattle World School SWS SDAT Workshop 3 2 December 203 SPS SWS at TT Minor TCF Architecture Project Number: 203 002 MEETING MINUTES Attendance: Name Representing Role Paul Wight Seattle Public Schools
More informationDOCUMENT NARRATIVE PETSMART # 3131 GREEN VALLEY SAHUARITA, ARIZONA Construction Change Directive #1 (CCD-1) / September 22, 2017
These documents, indicated as Construction Change Directive #1 with a delta - 1, supersede the previous issue and should be inserted into the Construction Documents. The tags in the column indicate which
More informationEstates Development & Projects
Estates Development & Projects Production Guidelines for the Building Fabric Manual (incorporating Health & Safety File) Guidance for the Technical Author REVISION 10.2 Issue Date 09/2017 Contents Part
More informationCopyright 1998 KDE Technologies
Modular Computer Corner Desk Unit Copyright 1998 KDE Technologies http://members.tripod.com/~kdetech/ 1. Introduction 2. Plans Sheet one - Isometric Sheet two - Top Detail / Corner Unit Sheet three - Leg
More information[ BOOTCAMP : 6 DAYS ] Digital Fabrication at the Green Fab Lab Barcelona
[ BOOTCAMP : 6 DAYS ] Digital Fabrication at the Green Fab Lab Barcelona Day 1 : > Introductory tour of the Green Fab Lab and facilities. > Review the week: Documentation and Description of objectives
More informationMITCHELL FURNITURE SYSTEMS, INC.
MITCHELL FURNITURE SYSTEMS, INC. MITCHELL WALL MOUNTED TABLE/BENCH SYSTEM: ARCHITECTURAL DATA Laminate, Backer & Adhesive GREENGUARD Certified Components PART I. - ATTENTION: SPECIFIER AND/OR ARCHITECT
More informationARCHITECTURAL REVIEW COMMITTEE TOWN APARTMENT CONSTRUCTION SUBMITTAL FORM AND APPLICATION
For Office Use Only Date Received: Approved: ARC Non-Refundable Fees ARC Refundable Deposit Pd: For Office Use Only Plat Name: Lot # Street Address: New Construction Alteration Preliminary Final ARCHITECTURAL
More informationBUILDING STANDARDS BUILDING AND DEVELOPMENT PERMIT APPLICATION DRAWING REQUIREMENTS
Building and Development Permit Applications Definitions: Type A Residential Projects: All projects related to one and two unit dwellings Type B Residential Projects: All projects related to Apartments,
More informationPROJECT LEAD The way. Quakertown community high school
PROJECT LEAD The way Quakertown community high school is a college recognized pre-engineering program designed to prepare students for the challenges of college classes. Quakertown Community High School
More informationDPTI.UNLEY HS STEMWORK Sheet No Sheet Size Sheet Name
HOME ECONOMICS ADMINISTRATION & STUDENT SERVICES FH TECHNICAL STUDIES GENERAL TEACHING, CANTEEN & STAFFROOM OVAL FH ADMINISTRATION & GENERAL SCIENCE CAR PARK PMT GENERAL TEACHING, RESOURCE & SCIENCE GEORGE
More informationThe GMFI Process. Design Intent Document Preparation. Enroll in GMFI Program. Image Consultation. You are here. Design Intent Document.
Enroll in GMFI Program Image Consultation Design Intent Document Preparation Preliminary Drawings Final Drawings Design Intent Document You are here. 1-2 Construction Documents Services performed by dealer
More informationMechanical Design. Mark Jennings and Meera Wakim
Mechanical Design Mark Jennings and Meera Wakim Download, install, and log in to the UT Virtual desktop (for engineering students): http://www.engr.utexas.edu/itg/facilities/virtualdesktop Mark Jennings
More informationNotre Dame High Addition/Renovation Addendum 3 Page 1
School Notre Dame High Addition/Renovation Addendum 3 Page 1 PROJECT: Notre Dame High School Addition/ Renovation Calgary. Alberta DATE November 15, 2012 ADDENDUM NO. 3 Attachment pages Addendum: Page(s)
More informationGrand Garden Chalet 6X3 Assembly Manual
Revision #11 June 15, 2010 Grand Garden Chalet 6X3 Assembly Manual Thank you for purchasing a Grand Garden Chalet. Please take the time to identify all the parts prior to assembly. Please use Safety Eyewear
More informationPELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS AUTOCAD FOR INTERIOR DESIGN: STUDIO IV IDT 2305
PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS AUTOCAD FOR INTERIOR DESIGN: STUDIO IV IDT 2305 Class Hours: 3 Credit Hours: 4 Laboratory Hours: 3 Date Revised: Spring 2011 NOTE: This course is designed
More informationCherokee Heights Elementary School
694 Charlton Street Project Summary: Cherokee Heights Elementary is about to start its exciting transition to a Montessori learning model. The school is connected to the Baker Center which is currently
More informationAddendum to Description of Services for Building and Planning, Digital Design. The Association of of Consulting Engineers
Addendum to Description of Services for Building and Planning, 2012 8.4 Digital Design 2016 The Association of of Consulting Engineers FRI and DANSKE ARK Addendum to Description of Services for Building
More informationINSTALLATION SHOP DRAWINGS FOR MINNEAPOLIS, MN
MINNEAPOLIS, MN 2-0- 2-- General Notes Abbreviations Deviations from Architectural Specifications Deviations from Architectural Drawings ALUM. = ALUMINUM B.O. = BY OTHERS CONT. = CONTINUOUS. = CLEARANCE
More informationHall of Waters List of Historic Drawings
List of Historic Drawings The following represents the historic drawings of the PROJECT PWA PROJECT NUMBER JOB NUMBER SHEET NUMBER SHEET TITLE DATE NOTES 1935 Drawing Piping Layout at Tank Room for Mineral
More informationUpdated Sheet Index for DRC Submittal A0.1
Sheet Index Landscape Architecture A0.0 Cover Sheet A0.1 Sheet Index A0.2 Enhanced Perspective A0.3 Enhanced Perspective A0.4 Enhanced Perspective A0.5 Enhanced Perspective A0.6 Enhanced Perspective A0.7
More informationHealth / Life Science Labs
Health / Life Science Labs WE DESIGN IT. WE PLAN IT. WE GET IT. USER-CENTRIC PRODUCT KNOWLEDGE We have a deep knowledge of health / life science labs. Our founder began his career with the Herman Miller
More informationfermacell Lightweight solutions for heavyweight construction January 2018
fermacell Lightweight solutions for heavyweight construction January 2018 2 3 fermacell Gypsum fibreboard the properties of solid blockwork with the speed and flexibility of traditional dry wall techniques.
More informationVisual Imaging in the Electronic Age
Visual Imaging in the Electronic Age ART 2107, ARCH 3702, CS 1620, ENGRI 1620 3D Printing November 6, 2014 Prof. Donald P. Greenberg dpg5@cornell.edu Types of 3D Printers Selective deposition printers
More informationGrand Garden Chalet 6X3 Assembly Manual
Revision #8 November 1, 2009 Grand Garden Chalet 6X3 Assembly Manual Thank you for purchasing a Grand Garden Chalet. Please take the time to identify all the parts prior to assembly. Please use Safety
More informationAttachment A HERON RIDGE ESTATES RESIDENTIAL NEIGHBORHOODS PROCEDURE FOR OBTAINING DESIGN COMMITTEE APPROVAL
Attachment A HERON RIDGE ESTATES RESIDENTIAL NEIGHBORHOODS PROCEDURE FOR OBTAINING DESIGN COMMITTEE APPROVAL 1. Submittal of one set of preliminary or construction documents as outlined on the following
More informationSteel / Industrial Partition Guide
Steel / Industrial Partition Guide Please use this guide to assist you with assessing your partitions and industrial wall requirements. Shown on the following pages are: Partition Modules (Page 2) These
More informationINSTALLATION INSTRUCTIONS SIDELITE ASSEMBLY SERIES 900 TERRACE DOOR AND SERIES 925 PATIO DOOR
INSTALLATION INSTRUCTIONS SIDELITE ASSEMBLY SERIES 900 TERRACE DOOR AND SERIES 925 PATIO DOOR Phone: (800) 262-5151 Fax: (866) 262-3299 crlaurence.com usalum.com crl-arch.com 11M0292 HANDLING, STORAGE,
More informationCITY OF OLIVETTE SITE PLAN AND COMMUNITY DESIGN REVIEW INFORMATION PACKET
CITY OF OLIVETTE SITE PLAN AND COMMUNITY DESIGN REVIEW INFORMATION PACKET THE FOLLOWING PACKET CONTAINS: PETITION FOR NONRESIDENTIAL DEVELOPMENT SITE PLAN AND COMMUNITY DESIGN REVIEW SCHEDULE OF DATES
More informationCentral High School. 275 Lexington Parkway North. Project Summary: Issues Identified By School Community In 2015
275 Lexington Parkway North Project Summary: Central is the oldest high school in the state of Minnesota, beginning its 150th year. Its rich traditions, including academic excellence, are widely celebrated.
More informationMAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC certified)
MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC -270001 2005 certified) SUMMER -2017 EXAMINATION Subject code: Model Answer Page No: 01/13 Important Instructions to examiners: 1) The
More informationBERKELEY COUNTY ENGINEERING AND
BERKELEY COUNTY ENGINEERING AND BUILDING INSPECTIONS 400 West Stephen Street - Suite 202, Martinsburg, WV 25401-3838 Telephone: 304-264-1966, Fax: 304-262-3128 Web Page: www.berkeleywv.org I. WHAT ARE
More informationTECHNOLOGY MASTER PLAN
TECHNOLOGY MASTER PLAN Our vision is to create a campus that not only provides students with a lively, cosmopolitan atmosphere to enjoy, but provides them with important links to amenities and public transport,
More information4. Special Systems Design: including Fire Alarm and Security. C. Electrical and Telecommunications Ductbanks: Refer to Section 16118
PART 1: GENERAL This section of the design standard outlines general requirements for electrical and telecommunications designs to be performed for the University of Texas at Austin. This standard is intended
More informationAmerican Institute of Architects New Hampshire Chapter High School Design Competition Program
American Institute of Architects New Hampshire Chapter 2009 2010 High School Design Competition Program Educational Objectives To increase your awareness of the relationships between space, human scale
More informationARCHITECTURAL REVIEW COMMITTEE HOMESITE CONSTRUCTION SUBMITTAL FORM AND APPLICATION
For Office Use Only Date Received: Approved: ARC Non-Refundable Fees: ARC Refundable Deposit Pd: For Office Use Only Plat Name: Lot # Street Address: New Construction Alteration Preliminary Final ARCHITECTURAL
More information*********************************************************************************************************
10400 IDENTIFYING DEVICES ********************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 10 14 00 *********************************************************************************************************
More informationART 3600, Interior Architecture Studio III Fall Grover Center W330 Tuesday & Thursday 1:30 4:20PM
ART 3600, Interior Architecture Studio III Fall 2018-2019 Grover Center W330 Tuesday & Thursday 1:30 4:20PM Matthew Ziff, M.Arch, Associate Professor, Area Chair Grover W325 740-593-2869 ziff@ohio.edu
More informationWelcome to the a Department of Engineering Education! ENGR 1182 Introduction to Engineering II Graphics 01
Welcome to the a Department of Engineering Education! ENGR 1182 Introduction to Engineering II Graphics 01 Today s Objectives Teaching Team Introduction Course Structure & Expectations Course Syllabus
More informationSolutions AGRICULTURAL LABORATORY & CLASSROOM FURNITURE. Education to Industry. Solutions for Your Workspace & Storage Needs
AGRICULTURAL LABORATORY & CLASSROOM FURNITURE Education to Industry for Your Workspace & Storage Needs www.ageducationalsolutions.com 864-256-0621 info@ageducationalsolutions.com Workbenches Potting Benches
More informationSYLVAN WAY LIBRARY FIRE DOORS REQUEST FOR BID
SYLVAN WAY LIBRARY FIRE DOORS REQUEST FOR BID Kitsap Regional Library is currently seeking quotes for replacement and installation of fire rated frames, doors and hardware at the Sylvan Way branch. There
More informationWINTER 15 EXAMINATIONS Subject Code: Model Answer- Building Drawing Page No- 01 /15
Subject Code: 17309 Model Answer- Building Drawing Page No- 01 /15 Important Instruction to Examiners:- 1) The answers should be examined by key words & not as word to word as given in the model answers
More informationTown of Mount Pleasant PRELIMINARY Design Review Submittal Check List June 1, 2014
Town of Mount Pleasant PRELIMINARY Design Review Submittal Check List June 1, 2014 This form is to be completed by either applicant or their representative and submitted with Preliminary Review plans.
More informationModern Techno Engineers
+91-8071803764 Modern Techno Engineers https://www.indiamart.com/moderntechnoengineers/pdf1.html Established in the year 2007, Modern Techno Engineers represents leading Wholesale Trader of UPVC Window
More informationHANSCOM FIELD ARFF AND CBP BUILDING
HANSCOM FIELD ARFF AND CBP BUILDING AERIAL VIEW OF AIRFIELD PROJECT SITE HANSCOM AIR FIELD CIVIL AIR TERMINAL HANSCOM AIR FORCE BASE 95 AIRFIELD MAIN ENTRY SITE AERIAL PLAN VIEW OF AIRFIELD N MASSACHUSETTS
More information3 Basic Code Enforcement, Part 3
Study Session 3 Basic Code Enforcement, Part 3 Technical Aspects of Code Enforcement OBJECTIVE: To become familiar with the technical aspects of code enforcement: first, by learning to recognize the basic
More informationDIGF 6B21 Ubiquitous Computing
DIGF 6B21 Ubiquitous Computing NUMBER OF CREDITS: 1.5 Day and Time: Tuesdays 18:30 21:30, beginning October 30th Location: Room 7301, 205 Richmond Professor: Nick Puckett Email: npuckett@faculty.ocadu.ca
More informationApplication Bulletin 240
Application Bulletin 240 Design Consideration CUSTOM CAPABILITIES Standard PC board fabrication flexibility allows for various component orientations, mounting features, and interconnect schemes. The starting
More informationAt the completion of this guide you should be comfortable with the following:
About This Guide This guide provides instructions and best practices for deployment of the Yealink W52P/W56P/W60 DECT IP phones and repeaters RT10/RT20/RT20U, which is intended for qualified technicians
More informationInstallation Instructions
Installation Instructions MAP (Mechanically Applied Panels) Please Read Disclaimers: PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION These guidelines are provided in good faith to help prevent
More informationTRIBAL BUILDING AND DEVELOPMENT Plan Check Submittal
TRIBAL BUILDING AND DEVELOPMENT Plan Check Submittal Complete sets of plans are required. Plans shall be stamped and wet signed by the architect or engineer. (signed and accompanied with letter from Homeowners
More informationfocused on implantable pulse generators for restoration of function in individuals paralyzed by stroke or SCI.
Introduction The Cleveland FES Center s Technical Development Laboratory (TDL) designs and fabricates implantable medical devices that are intended for use in human feasibility studies conducted under
More information> Installation Instructions
SmarterFence BY BEDFORD TECHNOLOGY > Installation Instructions BEFORE YOU START > Check to see if a permit is needed in your area. > Check with your local utility companies to locate any underground utilities.
More information