ELEMENTS OF CIVIL ENGINEERING (110004) MARKS DISTRIBUTION AND IMPORTANT QUESTIONS OF ALL THE UNITS
|
|
|
- Emil Cameron
- 5 years ago
- Views:
Transcription
1 ELEMENTS OF CIVIL ENGINEERING (110004) MARKS DISTRIBUTION AND IMPORTANT QUESTIONS OF ALL THE UNITS Unit-1 SCOPE OF CIVIL ENGINEERING One or two Questions are generally asked from this Unit the weightage of marks varies from 5 to 7 marks. Important Questions: Q1) Enlist and Explain various branches of Civil Engineering. *** Q2) Discuss the role of Civil Engineers. *** Q3) Discuss the Impact of Infrastructural Development on the economy of the country. **** Q4) Explain the importance of Planning, scheduling and construction management in construction activities. ***
2 UNIT-2 SURVEYING This unit is the soul of the subject, carrying maximum weightage The total weightage of this unit varies from 32 to 36 marks i.e. nearly 50 % of the total marks IMPORTANT QUESTIONS: Q1) what is surveying? What are its objects and application? Explain its primary divisions. **** Q2) Differentiate between plain surveying and geodetic surveying. Q3) Explain the fundamental principles of Surveying. List the modern tools used for surveying and mapping. **** Q4) what is meant by local attraction? How it is detected? How is the observed bearing corrected for local attraction? *** Q5) describe the characteristics of contour and also explain the uses of contour maps. *** Q6) enumerate various tape corrections and explain any two in detail. *** Q7) Explain various types of Leveling. ** Q8) Explain reciprocal Leveling*** Q9) Differentiation between HI and Rise and fall Method** Q10) Explain Modern tools of surveying i.e. Remote sensing, GIS, GPS. *** Q11) Explain various methods and formulae to compute area and volume. **
3 Besides this 1 theory question is asked to draw a neat sketch of any surveying instrument explaining its component parts. Instruments which can be asked are as follows: *** Prismatic compass Chain Prism square Dumpy level and theodolite At least 3 examples are asked from this unit each carrying 5 to 7 marks The examples of Chain surveying**, Compass Surveying***, Tape correction **and Leveling**** are asked with certainty, besides this examples of planimeter and area computation are asked rarely. Examples on leveling are a certainty. 1 question is based on various definitions of surveying and leveling Some general definitions which can be asked are as follows: Surveying, Leveling, Geodetic surveying, Datum, Mean sea level, Ranging, Reciprocal leveling, Bearing, WCB, RB, Bench marks **
4 UNIT -3 CONSTRUCTION MATERIALS 2 questions are generally asked and the weightage of this unit varies from 7 to 10 marks. Out of various construction materials give due weightage to following materials. (Stone, Cement, Concrete, Bricks, Timber, and paints and varnishes.)*** IMPORTANT QUESTIONS: Q1) Discuss various construction material used in civil engineering**** Q2) Explain the requirement, type and uses of bricks. *** Q3) Explain various types of cement commonly available. ** Q4) Explain various ingredients of concrete. ** Q5) Explain various forms of timber. Give qualities of good timber. **
5 UNIT-4 ELEMENTS OF BUILDING CONSTRUCTION This unit is carrying weightage of 11 to 14 marks. IMPORTANT QUESTIONS: Q1) Enlist and Explain various principles of Building Planning. **** Q2) Draw a detailed sketch of C/s of a wall showing the components of the building. ** Q3) Give Classification of building based on occupancy and structures. *** Q4) Describe different types of loads acting on a building. ** Q5) Explain common building components. *** Besides this a question can be asked to draw a detailed Plan or Section by viewing a line plan and to prepare schedule of doors and window. ** If only plan is asked the question will be of 7 marks and if both plan and section or elevation is asked the question will be of 14 marks.
6 UNIT-5 WATER RESOURCE DEVELOPMENT 2 questions are generally asked from this unit. This unit is carrying weightage of 11 to 14 marks IMPORTANT QUESTIONS: Q1) Explain with neat sketch hydrological cycle*** Q2) Define watershed and explain steps involved in its development. **** Q3) Explain various characteristics of watershed development**** Q4) Define Hydrograph and give its application*** Q5) what do you mean by flood routing? ** Q6) Discuss Water Conservation*** Q7) what is a hydraulic structure? Classify them briefly. ** Q8) what are various canal regulatory works** Q9) Describe water conveyance System**
7 UNIT-6 TRANSPORTATION ENGINEERING Weightage varies from 10 to 14 marks Important Questions: Q1) Explain the role of transportation in National development. **** Q2) what are different modes of transportation? Discuss the characteristics features of different modes of transportation. **** Q3) explain various aids and devices used to control, regulate and guide traffic. *** Q4) Define Traffic signals with sketch. Enlist various types of signals. Also give the advantages and disadvantages of traffic signal. *** Q5) Explain with the help of neat sketch components of road pavement. ** WITH BEST WISHES G.H.TANDON
8 Books Recommended: Elements of Civil Engineering By: Prof. R.B.Khasiya Ms Rena.N.Shukla Mahajan Publication House Paper Solutions: Atul Prakashan Compiled By: Mr.Gaurav.H.Tandon Sr.Lecturer, GIT MOTIBHOYAN ID: Mobile No:
Question bank. Unit 1: Introduction
Question bank Unit 1: Introduction 1. Define surveying. 2. State the objects of surveying 3. State and explain the principle of surveying 4. State and explain the classification of surveying 5. Differentiate
Important Questions. Surveying Unit-II. Surveying & Leveling. Syllabus
Surveying Unit-II Important Questions Define Surveying and Leveling Differentiate between Surveying and Leveling. Explain fundamental Principles of Surveying. Explain Plain and Diagonal Scale. What is
Hours / 100 Marks Seat No.
17419 21415 3 Hours / 100 Seat No. Instructions (1) All Questions are Compulsory. (2) Answer each next main Question on a new page. (3) Illustrate your answers with neat sketches wherever necessary. (4)
Scheme I Sample Question Paper
Sample Question Paper Max. Marks : 70 Time : 3 Hrs. Q.1) Attempt any FIVE of the following. a. Define the term surveying b. List different instruments used for linear measurement. c. Define the term bearing
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM. Course Title: Surveying (Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM Course Title: Surveying (Code: 3330605) Diploma Programme in which this course is offered Civil /Mining/ Environmental/Transportation
SURVEYING I CENG 383
SURVEYING I CENG 383 9/21/2011 2 Introduction Definition An art of collecting data for mapping the relative positions of points above, below or on the surface of the earth. Surveying also includes the
S.E. (Civil) (Second Semester) EXAMINATION, 2012 SURVEYING (2008 PATTERN) Time : Three Hours Maximum Marks : 100
Total No. of Questions 12] [Total No. of Printed Pages 8 Seat No. [4162]-108 S.E. (Civil) (Second Semester) EXAMINATION, 2012 SURVEYING (2008 PATTERN) Time : Three Hours Maximum Marks : 100 N.B. : (i)
8/17/2014. Process of directly or indirectly measuring vertical distances to determine the elevation of points or their differences in elevation
Process of directly or indirectly measuring vertical distances to determine the elevation of points or their differences in elevation Leveling results are used: To design highways, railroads, canals, sewers,
MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (MSBTE) I Scheme II Semester Course Curriculum. Course Title: Basic Surveying (Course Code:...
MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (MSBTE) I Scheme II Semester Course Curriculum Course Title: Basic Surveying (Course Code:... ) Diploma programme in which this course is offered Semester
Suveying Lectures for CE 498
Suveying Lectures for CE 498 SURVEYING CLASSIFICATIONS Surveying work can be classified as follows: 1- Preliminary Surveying In this surveying the detailed data are collected by determining its locations
DR. JIVRAJ MEHTA INSTITUTE OF TECHNOLOGY MATHEMATICS, APPLIED SCIENCE & HUMANITIES DEPARTMENT LESSON PLANNING
DR. JIVRAJ MEHTA INSTITUTE OF TECHNOLOGY MATHEMATICS, APPLIED SCIENCE & HUMANITIES DEPARTMENT FACULTY: PROF. VIBHUTI RATHOD SEMESTER: SUBJECT: VECTOR CALCULUS AND LINEAR ALGEBRA (005) ACADEMIC YEAR: 05-06
Introduction to Surveying. Chapter -One-
Introduction to Surveying Chapter -One- 1 GENERAL INFORMATION FALL 2016 Assistant Lecturer : Asmaa Abdulmajeed Research Assistant: Zanyar Bazyan Course Title : Surveying 1 Course Code : CE 215 Class No
10/9/2018. Introduction to Surveying. Chapter -One-
Introduction to Surveying Chapter -One- 1 GENERAL INFORMATION FALL 2018-2019 Assistant Lecturer : Asmaa Ab. Mustafa Research Assistant: Course Title : Surveying Course Code : ARCH 224 Class No : S. 203
Scheme - G Sample Test Paper - I. Course Name : Civil Engineering Group Course Code : CE/ CS/ CR/ CV
Scheme - G Sample Test Paper - I Course Name : Civil Engineering Group Course Code : CE/ CS/ CR/ CV 17309 Semester : Third Subject Title : Building Drawing Marks : 25 Time: 1.30 hour Instructions: 1. All
Basic Surveying. Kabul, Afghanistan February 2011
Basic Surveying Kabul, Afghanistan February 2011 1 This watershed rehabilitation and restoration training was prepared by the U.S. Department of Agriculture (USDA) team of Jon Fripp (Civil Engineer USDA/NRCS),
CHAPTER 28 ENGINEERING AIDE (EA) NAVPERS E CH-66
CHAPTER 28 ENGINEERING AIDE (EA) NAVPERS 18068-28E CH-66 Updated: April 2016 SCOPE OF RATING GENERAL INFORMATION ENGINEERING AIDE CONSTRUCTION DESIGN CONSTRUCTION MANAGEMENT DRAFTING ENGINEERING TECHNICAL
1.1 GENERAL RECORD DRAWING REQUIREMENTS
Page 1 of 5 VILLAGE OF ROMEOVILLE RECORD DRAWINGS CHECKLIST PART I GENERAL Record drawings are required to provide a means of schematic verification that the intent of the approved engineering design has
VALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK ME6402 MANUFACTURING TECHNOLOGY II UNIT-I PART A 1. List the various metal removal processes? (BT1) 2. Explain how chip
PART XIII: HYDRAULIC/ HYDROLOGY SURVEYS
PART XIII: HYDRAULIC/ HYDROLOGY SURVEYS 13.1 Purpose and Scope Hydraulic surveys are required for flow analysis to determine bridge and culvert design characteristics. A hydraulic survey is usually but
Record Drawing Standards for Projects Version 2.1
for Projects Version 2.1 Updated September 21, 2016 Department: Spatial Data Group Engineering & Maintenance 1. INTRODUCTION... 1 2. GENERAL STANDARDS... 1 2.1 Drawing Standards... 1 2.2 Digital Submission
Hours / 100 Marks Seat No.
17419 21314 3 Hours / 100 Seat No. Instructions (1) All Questions are Compulsory. (2) Answer each next main Question on a new page. (3) Illustrate your answers with neat sketches wherever necessary. (4)
CIVIL TECHNOLOGY. 9. For the purpose of this paper, the size of a brick should be taken as 220 mm 110 mm 75 mm.
NATIONAL SENIOR CERTIFICATE EXAMINATION NOVEMBER 2014 CIVIL TECHNOLOGY Time: 3 hours 200 marks PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY 1. This question paper consists of 12 pages, a Formula Sheet
FACULTY OF ENGINEERING
Code No. 2295 / A B.E. 4/4 (EE / Inst. / M/P) II Semester (Main) Examination, April / May 2013 Subject: Intellectual Property Rights (Elective II) Time: 3 Hours Max.Marks: 75 Note: Answer all questions
DEPARTMENT OF MECHANICAL ENGINEERING
SCSVMV UNIVERSITY DEPARTMENT OF MECHANICAL ENGINEERING SUBJECT NAME : SUBJECT CODE : MANUFACTURING TECHNOLOGY-II EBM4DT055 QUESTION BANK UNIT-1 1. What is Grinding? 2. Briefly classify the Grinding Process.
Department of Civil and Environmental Engineering
Department of Civil and Environmental Engineering CEE213L Surveying & Introduction to GIS Lab SURVEYING LABORATORY NORTH SOUTH UNIVERSITY Center of Excellence in Higher Education The First Private University
IAN HUMBY TEACHING. List of Hand-Outs. Levelling
IAN HUMBY TEACHING List of Hand-Outs Levelling 6-1 Equipment List (Levelling) 11-1 to 11-3 Introduction to Levelling 11-4 Levelling Terminology 12-1 to 12-2 Measuring Height Change by Basic Methods 13-1
PROPOSED CURRICULAR STRUCTURE AND SYLLABI OF FULL-TIME DIPLOMA COURSE IN SURVEY ENGINEERING
PROPOSED 5 TH SEMESTER CURRICULAR STRUCTURE AND SYLLABI OF FULL-TIME DIPLOMA COURSE IN SURVEY ENGINEERING PROPOSED CURRICULAR STRUCTURE FOR FIFTH SEMESTER OF THE FULL TIME DIPLOMA COURSE IN SURVEY ENGINEERING
FACULTY OF CIVIL ENGINEERING & EARTH RESOURCES ENGINEERING SURVEY FIELDWORK. LEVELING (Standard Of Procedure)
FACULTY OF CIVIL ENGINEERING & EARTH RESOURCES ENGINEERING SURVEY FIELDWORK LEVELING (Standard Of Procedure) Subject Code Date Group Number Student Name & ID Number Group Member Name & ID Number 1 2 Lecturer
1
1 2 3 4 City of Golden 5 TerraSync ideally suited for new asset data collection, bullet proof because it pretty basic ArcPad Best for GIS professionals to take their GIS out to the field for decision making,
Application of GPS and Remote Sensing Image Technology in Construction Monitoring of Road and Bridge
2017 3rd International Conference on Social Science, Management and Economics (SSME 2017) ISBN: 978-1-60595-462-2 Application of GPS and Remote Sensing Image Technology in Construction Monitoring of Road
determining the relative height of different
Levelling & Contouring Principle of levelling Principle:-The principle of levelling is to obtain horizontal line of sight with respect to which vertical distances of the points above or below this line
SURVEYING LAB MANUAL
DEPLOMA IN CIVIL ENGINEERING C-111 SURVEYING LAB MANUAL D.VINAYA ASST.PROFESSOR CIVIL ENGINEERING DEPARTMENT SANKETIKA POLYTECHNIC COLLEGE AFFILIATED TO STATE BOARD OF TECHNICAL EDUCATION & TRAINING, HYDERABAD
CHAPTER 11 SURVEY CADD
CHAPTER 11 SURVEY CADD Chapter Contents Sec. 11.01 Sec. 11.02 Sec. 11.03 Sec. 11.04 Sec. 11.05 Sec. 11.06 Sec. 11.07 Sec. 11.08 Sec. 11.09 Sec. 11.10 General Description of Survey File Contents of Survey
Active and Passive Microwave Remote Sensing
Active and Passive Microwave Remote Sensing Passive remote sensing system record EMR that was reflected (e.g., blue, green, red, and near IR) or emitted (e.g., thermal IR) from the surface of the Earth.
CE2045-PREFABRICATED STRUCTURES QUESTION BANK
CE2045-PREFABRICATED STRUCTURES QUESTION BANK UNIT I - INTRODUCTION PART A 1. Define prefabrication 2. What are the types of prefabricates based on i. Plan area ii Based on weight 3. What are the types
To determine the difference in levels of points/objects. To determine the depth cutting and filling in engineering works.
UET-11-CE-SCET WAH SURVEYING-I Dumpy (Wye) Level LEVELLING: It is a surveying method used to determine the level of points/objects with reference to the selected datum. It is also used to set out engineering
Mapping The Study Area
While on the beach you will need to take some measurements to show where the study area is relative to the rest of the world and to show what is inside the study area. Once the measurements have been taken,
CONCEPT REVIEW GUIDELINES
Department of Planning & Community Development @ Jefferson Station 1526 E. Forrest Avenue Suite 100 East Point, GA 30344 404.270.7212 (Phone) 404.765.2784 (Fax) www.eastpointcity.org CONCEPT REVIEW GUIDELINES
LEVELING. Definitions
Definitions An elevation of a point : The vertical distance between the point and the reference level surface ( datum ),the most commonly used datum is the mean sea level (MSL ). Leveling : The process
Active and Passive Microwave Remote Sensing
Active and Passive Microwave Remote Sensing Passive remote sensing system record EMR that was reflected (e.g., blue, green, red, and near IR) or emitted (e.g., thermal IR) from the surface of the Earth.
DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK ME6402 MANUFACTURING TECHNOLOGY II UNIT I PART A 1. List the various metal removal processes? 2. How chip formation occurs in metal cutting? 3. What is
THE NATIONAL INSTITUTE OF ENGINEERING, Mysore UG - Semester End Examination Schedule - December 2014
5/12/2014 1 1 1 CV0413 Quantity Surveying & Estimation Computer Concept & C Programming CV0418/CV0501 Mechanics of Deformable Bodies CV0419/CV0201 Building Materials & Construction CV0420/CV0402 Mechanics
Recommended Qualification Structure for Wood Occupations (Construction) Level 2
Recommended Qualification Structure for Wood Occupations (Construction) Level 2 This structure has been recommended by employers and stakeholders from the above occupational area for organisations to form
GUJARAT TECHNOLOGICAL UNIVERSITY
1.0 RATIONALE: GUJARAT TECHNOLOGICAL UNIVERSITY COURSE NAME : COMMUNICATION SKILL II Skillful oral communication is student's ability to present his/her views and ideas confidently. Student of this programme
Integrated Life Cycle Management for Design, Modeling, and Operation of Stormwater Drainage Systems
Integrated Life Cycle Management for Design, Modeling, and Operation of Stormwater Drainage Systems Robert Mankowski, P.E. Vice President, Water Infrastructure Asset Performance 1 WWW.BENTLEY.COM 2017
TRADE: DRAUGHTMAN (CIVIL)
TRADE: DRAUGHTMAN (CIVIL) Week Trade Practical Trade Theory Workshop calculation & No. Science 1 2 3 4 1 INDUCTION TRAINING Familiarization with the institute.importance of trade training. Types of work
S u r v e y i n g f o r M i n i n g E n g i n e e r i n g ( 1 1 B ) 30S/30E/30M
9 1 4 9 S u r v e y i n g f o r M i n i n g E n g i n e e r i n g ( 1 1 B ) 30S/30E/30M 9 1 4 9 S u r v e y i n g f o r M i n i n g E n g i n e e r i n g ( 1 1 B ) 3 0 S / 3 0 E / 3 0 M Course Description
COMPILATION OF TENDER DOCUMENTS
COMPILATION OF TENDER DOCUMENTS Arc. Ibrahim A. Haruna, FNIA, PNIA, mni. -the familiar question!- Mr. Architect, after these your beautiful drawings, what next? ARCHITECT S PROCEDURE: -drawing board to
Services Overview. Northeast Blueprint
Services Overview 2D CAD Conversions Paper to CAD 2D CAD Conversions Construction Engineering / CAD Services Construction Markups Consultant Drawings Coordinated Drawings As -Builts Steel Structural Detailing
Survey Requirements. Design Guidelines and Standards. June Office of the University Architect
Design Guidelines and Standards Survey Requirements June 2004 Office of the University Architect Construction Management P.O. Box 210181 Cincinnati, Ohio 45221-0181 Table of Contents Survey Requirements
GENERAL DEVELOPMENT APPLICATIONS. General Submission Requirements
COMPLETE APPLICATION CHECKLIST Jan 2016 The following checklist has been compiled to assist the applicant in preparing their application for approval pursuant to Ontario Regulation 162/06. This checklist
VALLIAMMAI ENGINEERING COLLEGE SRM NAGAR KATTANKULATHUR DEPARTMENT OF MECHANICAL ENGINEERING ME6504 METROLOGY AND MEASUREMENTS QUESTION BANK
VALLIAMMAI ENGINEERING COLLEGE SRM NAGAR KATTANKULATHUR DEPARTMENT OF MECHANICAL ENGINEERING ME6504 METROLOGY AND MEASUREMENTS QUESTION BANK UNIT I BASICS OF METROLOGY 1. What are the uses of measurement?
Govt. Engineering College Jhalawar Model Question Paper Subject- Remote Sensing & GIS
Govt. Engineering College Jhalawar Model Question Paper Subject- Remote Sensing & GIS Time: Max. Marks: Q1. What is remote Sensing? Explain the basic components of a Remote Sensing system. Q2. What is
STUDY & EVALUATION SCHEME. Diploma in Engineering Second Year. Branch Diploma in Architecture
STUDY & EVALUATION SCHEME Diploma in Engineering Second Year Branch Diploma in Architecture Year-II, Semester -III S. No. Subject Code Subject Periods Evaluation Scheme Sessional Exam C T Total ESE T A
GE 113 REMOTE SENSING
GE 113 REMOTE SENSING Topic 9. Introduction to Global Positioning Systems (GPS) and Other GNSS Technologies Lecturer: Engr. Jojene R. Santillan jrsantillan@carsu.edu.ph Division of Geodetic Engineering
APPENDIX K DEPARTMENT OF PLANNING AND CODE ENFORCEMENT SUBDIVISION APPLICATION CENTER SUBMITTAL CHECKLIST
VI-K -1 of 8 APPENDIX K DEPARTMENT OF PLANNING AND CODE ENFORCEMENT SUBDIVISION APPLICATION CENTER SUBMITTAL CHECKLIST Final Submittal Major Subdivision Project Name Subdivision Number Location (Street
1 MUNICIPAL INFRASTRUCTURE
Engineering Design Criteria & Standard Drawings Page 5 1 MUNICIPAL INFRASTRUCTURE 1.1 Drawing & Submission Requirements 1.1.1 General This section discusses the requirements for the submission of engineering
Lesson 8: Surveying the Forest
Lesson 8: Surveying the Forest TEACHER: SCHOOL: GRADE LEVEL: 9-12 TASKS/COMPETENCIES ANR8046.172 Set up and operate a transit level and rod. ANR8046.173 Read a rod and a level to calculate slope. ANR8046.174
B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session
NA UNIVERSITY, CHENNAI - 600 5 APRIL/MAY- 28 For candidates admitted in Anna University,Chennai during Academic Years 21,22 & 23 PTCE22 PTGE2111 PTCE2254 PTCE22 PTCE2252 PTCE23 PTCE2255 PTGE21 PTCE2251
B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session
NA UNIVERSITY, CHENNAI - 600 5 NOVEMBER/DECEMBER- 27 For candidates admitted in Anna University,Chennai during Academic Years 21,22 & 23 PTCE22 PTGE2111 PTCE2254 PTCE22 PTCE2252 PTCE23 PTCE2255 PTGE21
Porter County Plan Commission
Plan Type: Development Plan Administrative DRC PC Primary Plan Administrative DRC PC Secondary Plat/Replat Administrative DRC PC PUD Conceptual Detailed Final Project Information Project Name: Developer
PERIYAR CENTENARY POLYTECHNIC COLLAGE Manufacturing Technology - II SUBCODE: MEB520 UNIT- I PART-A
PERIYAR CENTENARY POLYTECHNIC COLLAGE Manufacturing Technology - II 1. List out the cutting tool materials. 2. Define rake angle. 3. Define clearance angle. 4. What is meant by drilling? 5. What is the
THIS IS AN UNCONTROLLED DOCUMENT, THE READER MUST CONFIRM ITS VALIDITY BEFORE USE. Contents
Document Number: EOS 09-0100a Contents 1 Introduction... 2 2 Cable Routes/Joints... 2 3 Cable Details... 2 4 Cable Warning Markers... 4 5 Cable Drum Numbers... 4 6 Ducts - Including those used in a Directional
Introduction to Total Station and GPS
Introduction to Total Station and GPS Dr. P. NANJUNDASWAMY Professor of Civil Engineering J S S Science and Technology University S J College of Engineering Mysuru 570 006 Introduction History GPS Overview
Construction Surveying and Layout
Construction Surveying and Layout A Field Engineering Methods Manual Third Edition WESLEY G. CRAWFORD.CREATIVE CONSTRUCTION Creative Construction Publishing, Inc. 2720 South River Road West Lafayette,
CONTROLLER OF EXAMINATIONS. B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session
NA UNIVERSITY, CHENNAI - 600 5 NOVEMBER/DECEMBER- 28 For candidates admitted in Anna University,Chennai during Academic Years 22 & 23 PTCE22 PTGE2111 PTCE22 PTCE2252 PTCE2254 PTCE23 PTCE2255 PTGE21 PTCE2251
Site Plan/Building Permit Review
Part 6 Site Plan/Building Permit Review 1.6.01 When Site Plan Review Applies 1.6.02 Optional Pre- Application Site Plan/Building Permit Review (hereafter referred to as Site Plan Review) shall be required
The coordinate system and vertical datum shall be noted in the drawing in the metadata.
Purpose This document is provided for informational purposes and to assure data compatibility and compliance for as-built drawings or vector data formats specifically for the 354th Civil Engineer Squadron
COURSE SYLLABUS SURVEYING I
Solution Manual for Surveying Fundamentals and Practices 6th Edition by Nathanson Lanzafama Emeritus Link full download: http://testbankcollection.com/download/solution-manual-forsurveying-fundamentals-and-practices-6th-edition-by-nathanson-lanzafamaemeritus/
ARCHITECTURE CADD Course Syllabus
6111 E. Skelly Drive P. O. Box 477200 Tulsa, OK 74147-7200 ARCHITECTURE CADD Course Syllabus Course Number: TTC-0880 OHLAP Credit: Yes OCAS Code: 8903 Course Length: 120 Hours Career Cluster: Manufacturing
ELECTRICAL TECHNOLOGY UNIT-I
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK Subject Code : EMT (16EE209) Course & Branch : B.Tech CIVIL Year & Sem : II B.Tech & I Sem Regulation
Advanced Computer Aided Design COURSE OUTLINE
Advanced Computer Aided Design COURSE OUTLINE 1. Course Title: Advanced Computer Aided Design 2. CBEDS Title: Computer Aided Drafting/Design 3. CBEDS Number: 5705 4. Job Titles: Framers Construction Inspectors
Sai Nath University. Assignment For Diploma in ELECTRICAL Engineering II ND Sem.
Sai Nath University Assignment For Diploma in ELECTRICAL Engineering II ND Sem. The Assignment will consist of two parts, A and B. will have 5 short answer questions(40-60 words) of 4 marks each. will
NJDEP GPS Data Collection Standards for GIS Data Development
NJDEP GPS Data Collection Standards for GIS Data Development Bureau of Geographic Information Systems Office of Information Resource Management April 24 th, 2017 Table of Contents 1.0 Introduction... 3
GRINDERS 86 SAWS 86-90
sawing, cutting & grinding GRINDERS 86 SAWS 86-90 MINI GRINDER Cuts and grinds masonry, concrete and metal. Cuts to a depth of 25mm Can be fitted with surface grinding wheel for facing and grinding Powerful
PART XII: TOPOGRAPHIC SURVEYS
PART XII: TOPOGRAPHIC SURVEYS 12.1 Purpose and Scope The purpose of performing topographic surveys is to map a site for the depiction of man-made and natural features that are on, above, or below the surface
366 Glossary. Popular method for scale drawings in a computer similar to GIS but without the necessity for spatial referencing CEP
366 Glossary GISci Glossary ASCII ASTER American Standard Code for Information Interchange Advanced Spaceborne Thermal Emission and Reflection Radiometer Computer Aided Design Circular Error Probability
CHAPTER F IVE ROBOTIC TOTAL STATION
CHAPTER F IVE ROBOTIC TOTAL STATION 5 ROBOTIC TOTAL STATION 5 OVERVIEW If necessity is the mother of invention, then the invention of the Total Station robotic instrument truly fits the requirements of
Traffic and Roadway Improvements - Rte 123 (Belmont Street) Brockton, MA Client: BETA Group, Inc.
HIGHWAY PROJECT EXPERIENCE Traffic and Roadway Improvements - Rte 123 (Belmont Street) Brockton, MA Client: BETA Group, Inc. Alpha provided survey services to prepare a base plan of an approximately 2900
Doug Leeper, Senior Environmental Scientist Resource Conservation and Development Department Southwest Florida Water Management District
February 4, 2003 MEMORANDUM TO: FROM: SUBJECT: File Doug Leeper, Senior Environmental Scientist Resource Conservation and Development Department Southwest Florida Water Management District Proposed minimum
Appendix A Lower Columbia River Chart Datum Modeling
Appendix A Lower Columbia River Chart Datum Modeling David Evans and Associates, Inc. David Evans and Associates, Inc. 2801 SE Columbia Way, Ste. 130 Vancouver, WA 98661 (360) 314-3200 1.0 Vertical Datum
Code No: M0326 /R07 Set No. 1 1. Define Mechatronics and explain the application of Mechatronics in CNC Machine tools and Computer Integrated Manufacturing (CIM). 2. (a) What are the various Filters that
A step by step guide to recording a building
BUCKINGHAMSHIRE ARCHAEOLOGICAL SOCIETY HISTORIC BUILDINGS GROUP A step by step guide to recording a building First, the essential safety bit! Never work alone (unless you are surveying your own house!)
AC : THE PEDAGOGY OF THE SURVEYING LABORATORY
C 2008-724: THE PEDGOGY OF THE URVEYING LBORTORY Philip Brach, University of the District of Columbia PHILIP L. BRCH, PH.D., P.E., F-NPE Distinguished Professor (Emeritus), former Dean, Past President,
ACSA PLAN REVIEW CHECKLIST (Guideline Only) (4) Standard water and sewer general plan notes (attached).
ACSA PLAN REVIEW CHECKLIST (Guideline Only) Revised: December 3, 2015 General (1) Proper Title (2) Vicinity map on first sheet. (3) Date and latest plan revision. (4) Standard water and sewer general plan
Cleveland State University
CVE 212 - Surveying Lab #4 LOCATION SURVEY EQUIPMENT Right angle mirror (pentaprism) Surveyor s tape Plumb bobs Range poles INTRODUCTION Many times the surveyor is called upon to catalog details of a project
IOWA CITY WASTEWATER TREATMENT PLANT RELOCATION PROJECT NORTH PLANT SALVAGE AND DEMOLITION PHASE CITY OF IOWA CITY FEBRUARY, 2015
IOWA CITY WASTEWATER TREATMENT PLANT RELOCATION PROJECT No Record Drawing Comments by Veit for this Sheet! FOR FEBRUARY, 2015 VEIT Record Drawings Demolition Project Manager: Jason Mueller Demolition Superintendent:
APPLICATION FOR SITE PREPARATION PERMIT
Engineering Division 550 Landa Street New Braunfels, Texas 78130 (830) 221-4020 1. Subdivision/Plat Name: Location Description/ Nearest Intersection: Acreage: APPLICATION FOR SITE PREPARATION PERMIT No.
SECTION SITE SURVEYS
SECTION 02 21 13 SITE SURVEYS SPEC WRITER NOTE: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. Use this section to specify survey required before design
EGYPTIAN HYDROGRAPHIC DEPARTMENT THE EGYPTIAN HYDROGRAPHIC FRAMEWORK
gvt THE EGYPTIAN HYDROGRAPHIC FRAMEWORK The roles of a national Hydrographic Service can be summarized in collecting georeferenced data through systematic surveys at sea and along the coast related to:
GAIL (India) Limited (A Govt. of India Undertaking) A Navratna Company New Delhi (India)
GAIL (India) Limited (A Govt. of India Undertaking) A Navratna Company New Delhi (India) BID DOCUMENT FOR CONSTRUCTION OF 10" DIA. X 60 KM STEEL PIPELINE, TERMINALS AND ASSOCIATED FACILITIES FOR UPGRADATION
The Basics. HECRAS Basis Input. Geometry Data - the basics. Geometry Data. Flow Data. Perform Hydraulic Computations. Viewing the Output
The Basics HECRAS Basis Input Geometry Data. Flow Data. Perform Hydraulic Computations by G. Parodi WRS ITC The Netherlands Viewing the Output ITC Faculty of Geo-Information Science and Earth Observation
(Construction) Level 2 NVQ Diploma in Wood Occupations. *CITB unit ref 641 Conforming to general health, safety and welfare in the workplace 1
Qualification : NVQ Diploma in Wood Occupations (Construction) Pathway 1: NVQ Diploma in Wood Occupations (Site Carpentry) Pathway : NVQ Diploma in Wood Occupations (Architectural Joinery) Pathway 3: NVQ
PRELIMINARY PLAT CHECK LIST
Name of Proposed Subdivision: The following items must be included with the initial submittal of a Preliminary Plat: Application, filled out completely Project Narrative Pre-application Conference Report
Discovery Report Appendix L Dams and Floodplain Structures Lake Ontario St. Lawrence Watershed HUC
Discovery Report Appendix L Dams and Floodplain Structures Lake Ontario St. Lawrence Watershed HUC 04150309 July 2016 Federal Emergency Management Agency Department of Homeland Security 26 Federal Plaza
GOVERNMENT POLYTECHNIC MUZAFFARPUR
GOVERNMENT POLYTECHNIC MUZAFFARPUR CIVIL ENGINEERING DEPARTMENT 3 RD SEM SURVEYING LAB MANNUAL SUBJECT CODE-160150306 Government Polytechnic Muzaffarpur EXPERIMENT NO- 1 AIM: Measurement of distance by
Loy Gulch, Paint Pony, East Fork Paint Pony LOMR
Loy Gulch, Paint Pony, East Fork Paint Pony LOMR Woodland Park, CO Prepared by: Michael Baker International 165 S. Union Blvd, Suite 200 Lakewood, CO 80226 TABLE OF CONTENTS I. INTRODUCTION... 2 1.1 Purpose...
Strengthened Technical-Vocational Education Program COURSE DESIGN
COURSE DESIGN COURSE TITLE : DRAFTING TECHNOLOGY NOMINAL DURATION : 1200 HOURS QUALIFICATION LEVEL : NC II COURSE DESCRIPTION : This course is designed to enhance the knowledge, skills, and positive attitudes
Instructors Manual for Construction Surveying and Layout Third Edition Part Three - Applications Chapters Prepared by Wesley G.
Instructors Manual for Construction Surveying and Layout Third Edition Part Three - Applications Chapters 19-22 Prepared by Wesley G. Crawford TABLE OF CONTENTS Chapter 19 - Layout Techniques... 3 Chapter
WASSCE / WAEC FURNITURE MAKING SYLLABUS
WASSCE / WAEC FURNITURE MAKING SYLLABUS WWW.LARNEDU.COM Visit www.larnedu.com for WASSCE / WAEC syllabus on different subjects and more great stuff to help you ace the WASSCE in flying colours. SCHEME