CHAPTER 28 ENGINEERING AIDE (EA) NAVPERS E CH-66
|
|
|
- Helen Sharp
- 5 years ago
- Views:
Transcription
1 CHAPTER 28 ENGINEERING AIDE (EA) NAVPERS E CH-66 Updated: April 2016
2 SCOPE OF RATING GENERAL INFORMATION ENGINEERING AIDE CONSTRUCTION DESIGN CONSTRUCTION MANAGEMENT DRAFTING ENGINEERING TECHNICAL SUPPORT FACILITIES SUPPORT MATERIALS TESTING SEABEE COMMON CORE SURVEYING UNDERWATER CONSTRUCTION TABLE OF CONTENTS ENGINEERING AIDE (EA) EA-3 EA-4 EA-5 EA-5 EA-5 EA-6 EA-6 EA-7 EA-7 EA-7 EA-8 EA-8 EA-2
3 NAVY ENLISTED OCCUPATIONAL STANDARD FOR ENGINEERING AIDE (EA) SCOPE OF RATING. Engineering Aides (EA) plan, supervise, and perform tasks required in surveying, drafting, materials testing, and construction management; establish control survey points, run traverses, obtain and convert field notes into topographic maps, and stake out for excavations; prepare, edit, and reproduce construction drawings; maintain systems to test and design aggregate mixes for soil-cement, concrete, and bituminous applications; prepare timekeeping records, construction schedules, and planning and estimating, quality control and progress reports; provide facilities support; maintain individual combat readiness; and perform tasks required in combat and Humanitarian Assistance/Disaster Recovery operations (HADR). This Occupational Standard is to be incorporated in Volume I, Part B, of the Manual of Navy Enlisted Manpower and Personnel Classifications and Occupational Standards (NAVPERS 18068F) as Chapter 28. EA-3
4 GENERAL INFORMATION CAREER PATTERN CUCM CUCS BUC SWC EAC BU1 SW1 EA1 BU2 SW2 EA2 BU3 SW3 EA3 CONSTRUCTIONMAN APPRENTICESHIP Normal path of advancement to Chief Warrant Officer and Limited Duty Officer categories can be found in OPNAVINST For rating entry requirements, refer to MILPERSMAN SAFETY The observance of Operational Risk Management (ORM) and proper safety precautions in all areas is an integral part of each billet and the responsibility of every Sailor; therefore, it is a universal requirement for all ratings. EA-4
5 Job Title E4 CORE Inspect construction materials EA-5 Job Code Engineering Aide Job Family NOC Short Title (30 Characters) Short Title (14 Characters) Architecture and Engineering TBD ENGINEERING AIDE ENGINEER AIDE Pay Plan Career Field Other Relationships and Rules Enlisted EA NEC's 5501, 5503, 5708, 5712, 5931, 5932, 5933, 6021, Job Description Engineering Aides plan, supervise, and perform tasks required in surveying, drafting, materials testing, and construction management; establish control survey points, run traverses, obtain and convert field notes into topographic maps, and stake out for excavations; prepare, edit, and reproduce construction drawings; maintain systems to test and design aggregate mixes for soil-cement, concrete, and bituminous applications; and prepare timekeeping records, construction schedules and planning and estimating, and quality control and progress reports. As project managers, they plan, staff, direct, and control multiple construction projects to include problem solving, planning, estimating, scheduling, cost control, and personnel management ensuring compliance with specifications, code requirements, plans, and contracts; and act as project supervisors and trainers for junior personnel. DoD Relationship O*NET Relationship Group Title DoD Code Occupation Title SOC Code Job Family Construction, General Civil Engineering Technicians Architecture and Engineering Skills Critical Thinking Management of Personnel Resources Operation and Control Complex Problem Solving Management of Material Resources Coordination Mathematics Judgment and Decision Making Active Listening Operation Monitoring Abilities Information Ordering Deductive Reasoning Inductive Reasoning Oral Expression Control Precision Problem Sensitivity Manual Dexterity Mathematical Reasoning Response Orientation Reaction Time CONSTRUCTION DESIGN Paygrade Task Type E4 CORE Task Statements Draft architectural designs E4 CORE Draft civil engineering designs E4 CORE Draft electrical component designs E4 CORE Draft heavy construction designs E4 CORE Draft mechanical component designs E4 CORE Draft structural members designs CONSTRUCTION MANAGEMENT Paygrade Task Type E6 CORE Task Statements Conduct three-phase quality control inspections E4 CORE Develop construction activity estimates E5 CORE Develop construction environmental protection plans E5 CORE Develop construction project packages E5 CORE Develop construction safety plans E4 CORE Develop construction sketches and diagrams E5 CORE Develop project three-phase quality control plans E5 CORE Establish construction site layouts
6 E6 CORE Inspect construction projects E4 NON-CORE Interpret construction drawings and specifications E4 CORE Inventory project tools and materials E5 CORE Lead construction projects E5 CORE Maintain construction project resources E5 CORE Maintain facilities E7 NON-CORE Manage camp maintenance operations E7 CORE Manage construction environmental protection programs E6 CORE Manage construction project resources E7 CORE Manage construction projects E7 CORE Manage construction safety programs E7 CORE Manage facilities maintenance programs E6 NON-CORE Manage maintenance contracts E7 CORE Manage project quality control programs E7 CORE Manage three-phase quality control programs E6 NON-CORE Monitor construction project contracts E5 CORE Supervise construction project safety operations E6 CORE Supervise construction projects E6 CORE Supervise construction safety operations E6 CORE Supervise environmental protection programs E6 CORE Supervise facilities maintenance programs E6 CORE Supervise planning and estimating operations E5 CORE Supervise project three-phase quality control programs E5 CORE Turnover construction projects E5 NON-CORE Validate project surveys and elevation data DRAFTING E4 CORE Analyze construction drawings E4 CORE Develop construction plans using Computer-Aided Drafting (CAD) software E4 CORE Prepare construction drawings E4 CORE Produce construction drawings E5 CORE Supervise drafting operations ENGINEERING TECHNICAL SUPPORT E4 CORE Calculate engineering and construction design requirements E6 NON-CORE Conduct building inspections E6 NON-CORE Consolidate construction project specifications E5 CORE Develop unit operational reports E4 CORE Maintain engineering technical libraries E4 CORE Maintain engineering tool kits EA-6
7 E4 CORE Maintain technical plan files and records E7 CORE Manage engineering support operations E6 CORE Supervise engineering support operations FACILITIES SUPPORT E6 NON-CORE Administer facilities maintenance contracts E5 NON-CORE Administer facilities maintenance programs E4 CORE Coordinate facilities maintenance program requests E7 NON-CORE Manage facilities contract administration programs E7 NON-CORE Manage facilities maintenance programs MATERIALS TESTING E4 CORE Compute bituminous mix design proportions E4 CORE Compute concrete mix design proportions E4 CORE Compute soil-cement mix design proportions E5 CORE Develop materials testing reports E6 NON-CORE Supervise batch plant operations E5 NON-CORE Supervise batch plant quality assurance programs E6 CORE Supervise materials testing operations E4 CORE Test asphalt materials E4 CORE Test concrete materials E4 CORE Test soil materials SEABEE COMMON CORE E4 CORE Apply combat life saving techniques E4 CORE Conduct Chemical, Biological, Radiological and Nuclear Explosive (CBRNE) defensive operations E4 CORE Conduct convoy operations E4 CORE Conduct Disaster Recovery Operations (DRO) E4 CORE Conduct embarkation and debarkation operations E6 NON-CORE Conduct Maritime Prepositioning Force (MPF) operations E4 CORE Conduct personal protection and decontamination operations E4 CORE Employ Advance Base Functional Component (ABFC) systems E4 CORE Employ grenades, mines, and pyrotechnics E4 CORE Employ land survival techniques E4 NON-CORE Maintain crew-served weapons E4 CORE Maintain field communications equipment E4 CORE Maintain Personal Gear Issue (PGI) E4 CORE Maintain small arms E4 NON-CORE Operate crew-served weapons EA-7
8 E4 CORE Operate field communications equipment E4 CORE Operate small arms E4 CORE Patrol assigned areas E7 CORE Perform command and control of a company E4 CORE Perform command and control of a fire team E6 CORE Perform command and control of a platoon E5 CORE Perform command and control of a squad E7 NON-CORE Plan convoy operations E4 CORE Repair damaged airfields E4 CORE Set tactical defenses E7 NON-CORE Supervise Airfield Damage Repair (ADR) operations SURVEYING E4 CORE Conduct construction surveys E5 CORE Conduct engineering surveys E4 CORE Conduct Global Positioning System (GPS) surveys E4 CORE Develop survey designs using Geographic Information Systems (GIS) software E5 CORE Supervise surveying operations UNDERWATER CONSTRUCTION E5 NON-CORE Conduct oceanographic surveys E5 NON-CORE Maintain diving equipment E5 NON-CORE Maintain diving support equipment E7 NON-CORE Manage demolition operations E7 NON-CORE Manage diving emergency procedures E7 NON-CORE Manage diving equipment maintenance E7 NON-CORE Manage diving support equipment maintenance E7 NON-CORE Manage light salvage operations E7 NON-CORE Manage Maritime Prepositioning Force (MPF) pre-offload operations E7 NON-CORE Manage Naval Sea Systems Command (NAVSEA) system certification programs E7 NON-CORE Manage oceanographic surveys E7 NON-CORE Manage Offshore Petroleum Distribution System (OPDS) operations E7 NON-CORE Manage Remote Operated Vehicle (ROV) operations E7 NON-CORE Manage small craft operations E7 NON-CORE Manage underwater construction operations E5 NON-CORE Perform coxswain duties E5 NON-CORE Perform demolition operations E5 NON-CORE Perform diving emergency procedures E5 NON-CORE Perform diving operations E5 NON-CORE Perform light salvage operations EA-8
9 E5 NON-CORE Perform Maritime Prepositioning Force (MPF) pre-offload operations E5 NON-CORE Perform Offshore Petroleum Distribution System (OPDS) operations E5 NON-CORE Perform Remote Operated Vehicle (ROV) operations E5 NON-CORE Perform small craft operations E5 NON-CORE Perform underwater construction operations E6 NON-CORE Supervise demolition operations E6 NON-CORE Supervise diving emergency procedures E6 NON-CORE Supervise diving equipment maintenance E6 NON-CORE Supervise diving operations E6 NON-CORE Supervise diving support equipment maintenance E6 NON-CORE Supervise light salvage operations E6 NON-CORE Supervise Maritime Prepositioning Force (MPF) pre-offload operations E6 NON-CORE Supervise Naval Sea Systems Command (NAVSEA) system certification programs E6 NON-CORE Supervise oceanographic surveys E6 NON-CORE Supervise Offshore Petroleum Distribution System (OPDS) operations E6 NON-CORE Supervise Remote Operated Vehicle (ROV) operations E6 NON-CORE Supervise small craft operations E6 NON-CORE Supervise underwater construction operations EA-9
CHAPTER 75 STEELWORKER (SW)
CHAPTER 75 STEELWORKER (SW) NAVPERS 18068-75E CH-65 Updated: January 2016 Enclosure (1) TABLE OF CONTENTS STEELWORKER (SW) SCOPE OF RATING GENERAL INFORMATION STEELWORKER ARC WELDING AND CUTTING CONSTRUCTION
CHAPTER 18 CONSTRUCTION MECHANIC (CM) NAVPERS E CH-65
CHAPTER 18 CONSTRUCTION MECHANIC (CM) NAVPERS 18068-18E CH-65 Updated: January 2016 SCOPE OF RATING GENERAL INFORMATION CONSTRUCTION MECHANIC BODY SYSTEMS BRAKE SYSTEMS CHASSIS SYSTEMS CLIMATE CONTROL
CHAPTER 75 STEELWORKER (SW) NAVPERS F CH-77
CHAPTER 75 STEELWORKER (SW) NAVPERS 18068-75F CH-77 TABLE OF CONTENTS STEELWORKER (SW) SCOPE OF RATING GENERAL INFORMATION STEELWORKER ARC WELDING AND CUTTING CONSTRUCTION MANAGEMENT OXYFUEL GAS CUTTING
CHAPTER 17 CONSTRUCTION ELECTRICIAN (CE) NAVPERS F CH-77
CHAPTER 17 CONSTRUCTION ELECTRICIAN (CE) NAVPERS 18068-17F CH-77 SCOPE OF RATING GENERAL INFORMATION CONSTRUCTION ELECTRICIAN CONSTRUCTION MANAGEMENT TABLE OF CONTENTS CONSTRUCTION ELECTRICIAN (CE) ELECTRICAL
CHAPTER 77 UTILITIESMAN (UT) NAVPERS F CH-77
CHAPTER 77 UTILITIESMAN (UT) NAVPERS 18068-77F CH-77 TABLE OF CONTENTS UTILITIESMAN (UT) SCOPE OF RATING GENERAL INFORMATION UTILITIESMAN BOILERS CONSTRUCTION MANAGEMENT FACILITIES MANAGEMENT HEATING,
CHAPTER 31 EQUIPMENT OPERATOR (EO) NAVPERS F CH-77
CHAPTER 31 EQUIPMENT OPERATOR (EO) NAVPERS 18068-31F CH-77 SCOPE OF RATING GENERAL INFORMATION EQUIPMENT OPERATOR CONSTRUCTION MANAGEMENT EARTHWORK EQUIPMENT MANAGEMENT MATERIAL HANDLING EQUIPMENT (MHE)
CHAPTER 36 EXPLOSIVE ORDNANCE DISPOSAL (EOD) NAVPERS B CH-62
CHAPTER 36 EXPLOSIVE ORDNANCE DISPOSAL (EOD) NAVPERS 18068-36B CH-62 Updated: April 2015 SCOPE OF RATING TABLE OF CONTENTS EXPLOSIVE ORDNANCE DISPOSAL (EOD) EOD-3 GENERAL INFORMATION BASIC EXPLOSIVE ORDNANCE
CHAPTER 51 MACHINIST'S MATE (MM) NAVPERS G CH-64
CHAPTER 51 MACHINIST'S MATE (MM) NAVPERS 18068-51G CH-64 Updated: October 2015 SCOPE OF RATING GENERAL INFORMATION TACTICAL WEAPONS OPERATOR ARMS, AMMUNITION, AND EXPLOSIVES (AA&E) DAMAGE CONTROL ORDNANCE
CHAPTER 55 MISSILE TECHNICIAN (MT) NAVPERS E CH-58
CHAPTER 55 MISSILE TECHNICIAN (MT) NAVPERS 18068-55E CH-58 Updated: April 2014 TABLE OF CONTENTS MISSILE TECHNICIAN (MT) SCOPE OF RATING GENERAL INFORMATION STRATEGIC WEAPONS MANAGER COUNTDOWN OPERATIONS
CHAPTER 1 AVIATION BOATSWAIN'S MATE (AB) NAVPERS D CH-63
CHAPTER 1 AVIATION BOATSWAIN'S MATE (AB) NAVPERS 18068-1D CH-63 Updated: July 2015 TABLE OF CONTENTS AVIATION BOATSWAIN'S MATE (LAUNCHING AND RECOVERY EQUIPMENT) (ABE) SCOPE OF RATING GENERAL INFORMATION
CHAPTER 20 CRYPTOLOGIC TECHNICIAN (CT) NAVPERS K CH-64
CHAPTER 20 CRYPTOLOGIC TECHNICIAN (CT) NAVPERS 18068-20K CH-64 Updated: October 2015 TABLE OF CONTENTS CRYPTOLOGIC TECHNICIAN (MAINTENANCE) (CTM) SCOPE OF RATING GENERAL INFORMATION CRYPTOLOGIC SYSTEMS
CHAPTER 51 MACHINIST'S MATE (MM) NAVPERS G CH-64
CHAPTER 51 MACHINIST'S MATE (MM) NAVPERS 18068-51G CH-64 Updated: October 2015 TABLE OF CONTENTS MACHINIST'S MATE, NON-NUCLEAR, SUBMARINE AUXILIARY (MMA) SCOPE OF RATING GENERAL INFORMATION AUXILIARY EQUIPMENT
CHAPTER 23 MASS COMMUNICATION SPECIALIST (MC) NAVPERS B CH-55
CHAPTER 23 MASS COMMUNICATION SPECIALIST (MC) NAVPERS 18068-23B CH-55 Updated: July 2013 TABLE OF CONTENTS MASS COMMUNICATION SPECIALIST (MC) SCOPE OF RATING GENERAL INFORMATION PRINT JOURNALIST PUBLIC
CHAPTER 10 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) NAVPERS E CH-75
CHAPTER 10 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) NAVPERS 18068-10E CH-75 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) TABLE OF CONTENTS SCOPE OF RATING GENERAL INFORMATION AVIATION SUPPORT EQUIPMENT
CHAPTER 20 CRYPTOLOGIC TECHNICIAN (CT) NAVPERS L CH-76
CHAPTER 20 CRYPTOLOGIC TECHNICIAN (CT) NAVPERS 18068-20L CH-76 TABLE OF CONTENTS CRYPTOLOGIC TECHNICIAN (MAINTENANCE) (CTM) SCOPE OF RATING GENERAL INFORMATION CRYPTOLOGIC SYSTEMS MAINTENANCE TECHNICIAN
CHAPTER 29 ELECTRICIAN S MATE (EM) NAVPERS G CH-70
CHAPTER 29 ELECTRICIAN S MATE (EM) NAVPERS 18068-29G CH-70 Updated: April 2017 TABLE OF CONTENTS ELECTRICIAN S MATE, NUCLEAR POWER (EMN) SCOPE OF RATING GENERAL INFORMATION SUBMARINE PROPULSION PLANT ELECTRICAL
CHAPTER 32 ELECTRONICS TECHNICIAN (ET) NAVPERS J CH-70
CHAPTER 32 ELECTRONICS TECHNICIAN (ET) NAVPERS 18068-32J CH-70 Updated: April 2017 TABLE OF CONTENTS ELECTRONICS TECHNICIAN, SUBMARINE, COMMUNICATIONS (ETR) SCOPE OF RATING GENERAL INFORMATION COMMUNICATIONS
CHAPTER 11 AVIATION ELECTRONICS TECHNICIAN (AT) NAVPERS F CH-69
CHAPTER 11 AVIATION ELECTRONICS TECHNICIAN (AT) NAVPERS 18068-11F CH-69 Updated: January 2017 TABLE OF CONTENTS AVIATION ELECTRONICS TECHNICIAN (INTERMEDIATE) (ATI) SCOPE OF RATING GENERAL INFORMATION
CHAPTER 3 AVIATION MACHINIST'S MATE (AD) NAVPERS F CH-62
CHAPTER 3 AVIATION MACHINIST'S MATE (AD) NAVPERS 18068-3F CH-62 Updated: April 2015 SCOPE OF RATING GENERAL INFORMATION TABLE OF CONTENTS AVIATION MACHINIST'S MATE (AD) AVIATION MACHINIST S MATE ORGANIZATIONAL
CHAPTER 3 AVIATION MACHINIST'S MATE (AD) NAVPERS G CH-76
CHAPTER 3 AVIATION MACHINIST'S MATE (AD) NAVPERS 18068-3G CH-76 SCOPE OF RATING GENERAL INFORMATION TABLE OF CONTENTS AVIATION MACHINIST'S MATE (AD) AVIATION MACHINIST S MATE ORGANIZATIONAL LEVEL AUXILIARY
CHAPTER 12 NAVAL AIRCREWMEN (AW) NAVPERS G CH-62
CHAPTER 12 NAVAL AIRCREWMEN (AW) NAVPERS 18068-12G CH-62 Updated: April 2015 TABLE OF CONTENTS NAVAL AIRCREWMEN (MECHANICAL) (AWF) SCOPE OF RATING GENERAL INFORMATION AIR WARFARE SYSTEMS ENGINEER AIRCRAFT
CHAPTER 54 CULINARY SPECIALIST (CS) NAVPERS 18068D-54F CH-54
CHAPTER 54 CULINARY SPECIALIST (CS) NAVPERS 18068D-54F CH-54 Updated: April 2013 TABLE OF CONTENTS CULINARY SPECIALIST (CS) SCOPE OF RATING GENERAL INFORMATION LEADING CULINARY SPECIALIST FOOD PREPARATION
CHAPTER 11 AVIATION ELECTRONICS TECHNICIAN (AT)
CHAPTER 11 AVIATION ELECTRONICS TECHNICIAN (AT) NAVPERS 18068-11F CH-69 ATI and ATO were formerly published as two separate documents in chapter 11. This update clarifies that AT is one rating with two
CHAPTER 20 CRYPTOLOGIC TECHNICIAN (CT) NAVPERS C CH-72
CHAPTER 20 CRYPTOLOGIC TECHNICIAN (CT) NAVPERS 18068-20C CH-72 Updated: October 2017 TABLE OF CONTENTS CRYPTOLOGIC TECHNICIAN (INTERPRETIVE) (CTI) SCOPE OF RATING GENERAL INFORMATION LANGUAGE ANALYST OPERATOR
CHAPTER 29 ELECTRICIAN S MATE (EM) NAVPERS G CH-76
CHAPTER 29 ELECTRICIAN S MATE (EM) NAVPERS 18068-29G CH-76 ELECTRICIAN S MATE (EM) TABLE OF CONTENTS SCOPE OF RATING GENERAL INFORMATION ELECTRICAL SYSTEMS MAINTAINER AUXILIARY ELECTRICAL EQUIPMENT ELECTRICAL
CHAPTER 30 ENGINEMAN (EN) NAVPERS F CH-70
CHAPTER 30 ENGINEMAN (EN) NAVPERS 18068-30F CH-70 Updated: April 2017 TABLE OF CONTENTS ENGINEMAN (EN) SCOPE OF RATING GENERAL INFORMATION DIESEL ENGINE SYSTEMS MANAGER ENGINEERING MANAGEMENT MECHANICAL
CHAPTER 23 MASS COMMUNICATION SPECIALIST (MC) NAVPERS C CH-73
CHAPTER 23 MASS COMMUNICATION SPECIALIST (MC) NAVPERS 18068-23C CH-73 TABLE OF CONTENTS MASS COMMUNICATION SPECIALIST (MC) SCOPE OF RATING GENERAL INFORMATION CONTENT DEVELOPER EVALUATION AND ANALYSIS
CHAPTER 38 GUNNER'S MATE (GM) NAVPERS G CH-70
CHAPTER 38 GUNNER'S MATE (GM) NAVPERS 18068-38G CH-70 Updated: April 2017 TABLE OF CONTENTS GUNNER S MATE (GM) SCOPE OF RATING GENERAL INFORMATION WEAPONS ADMINISTRATOR AUXILIARY EQUIPMENT AND SUPPORT
CHAPTER 10 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) NAVPERS D CH-42
CHAPTER 10 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) NAVPERS 18068-10D CH-42 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) TABLE OF CONTENTS SCOPE OF RATING GENERAL INFORMATION AVIATION SUPPORT EQUIPMENT
CHAPTER 53 MACHINERY REPAIRMAN (MR) NAVPERS E CH-65
CHAPTER 53 MACHINERY REPAIRMAN (MR) NAVPERS 18068-53E CH-65 Updated: January 2016 SCOPE OF RATING GENERAL INFORMATION MACHINERY REPAIR APPRENTICE FABRICATIONS AND MANUFACTURING MACHINE OPERATIONS PRE-MANUFACTURING
CHAPTER 47 LOGISTICS SPECIALIST (LS) NAVPERS A CH-73
CHAPTER 47 LOGISTICS SPECIALIST (LS) NAVPERS 18068-47A CH-73 SCOPE OF RATING GENERAL INFORMATION SUBMARINE LOGISTICS MANAGER ADMINISTRATION FINANCIAL LOGISTICS MANAGEMENT SUBMARINE LOGISTICIAN ADMINISTRATION
CHAPTER 1 AVIATION BOATSWAIN'S MATE (AB) NAVPERS D CH-63
CHAPTER 1 AVIATION BOATSWAIN'S MATE (AB) NAVPERS 18068-1D CH-63 Updated: July 2015 TABLE OF CONTENTS AVIATION BOATSWAIN'S MATE (AIRCRAFT HANDLING) (ABH) SCOPE OF RATING GENERAL INFORMATION AIRCRAFT DIRECTOR
CHAPTER 66 QUARTERMASTER (QM) NAVPERS E CH-67
CHAPTER 66 QUARTERMASTER (QM) NAVPERS 18068-66E CH-67 Updated: July 2016 TABLE OF CONTENTS QUARTERMASTER (QM) SCOPE OF RATING GENERAL INFORMATION NAVIGATION ADMINISTRATOR COMMUNICATIONS ELECTRONIC SYSTEMS
CHAPTER 29 ELECTRICIAN S MATE (EM) NAVPERS E CH-42
CHAPTER 29 ELECTRICIAN S MATE (EM) NAVPERS 18068-29E CH-42 ELECTRICIAN S MATE (EM) TABLE OF CONTENTS SCOPE OF RATING GENERAL INFORMATION ELECTRICAL SYSTEMS MAINTAINER AUXILIARY ELECTRICAL EQUIPMENT ELECTRICAL
CHAPTER 6 SPECIAL WARFARE OPERATOR (SO) NAVPERS B CH-66
CHAPTER 6 SPECIAL WARFARE OPERATOR (SO) NAVPERS 18068-6B CH-66 Updated: April 2016 TABLE OF CONTENTS SPECIAL WARFARE OPERATOR (SO) SCOPE OF RATING GENERAL INFORMATION SEA AIR AND LAND (SEAL) AIR INSERTION
CHAPTER 12 NAVAL AIRCREWMEN (AW) NAVPERS H CH-63
CHAPTER 12 NAVAL AIRCREWMEN (AW) NAVPERS 18068-12H CH-63 Updated: July 2015 SCOPE OF RATING GENERAL INFORMATION AIRBORNE COMMUNICATOR AIRCREW ADMINISTRATION AIRCREW DUTIES AIRCREW TRAINING COMMUNICATIONS
CHAPTER 39 GAS TURBINE SYSTEMS TECHNICIAN (GS) NAVPERS F CH-69
CHAPTER 39 GAS TURBINE SYSTEMS TECHNICIAN (GS) NAVPERS 18068-39F CH-69 Updated: January 2017 TABLE OF CONTENTS GAS TURBINE SYSTEMS TECHNICIAN (ELECTRICAL) (GSE) SCOPE OF RATING GENERAL INFORMATION GAS
CHAPTER 40 HOSPITAL CORPSMAN (HM) NAVPERS E CH-70
CHAPTER 40 HOSPITAL CORPSMAN (HM) NAVPERS 18068-40E CH-70 Updated: April 2017 HOSPITAL CORPSMAN (HM) TABLE OF CONTENTS SCOPE OF RATING GENERAL INFORMATION HOSPITAL CORPSMAN BASIC ANCILLARY SERVICES EMERGENCY
CHAPTER 59 OPERATIONS SPECIALIST (OS) NAVPERS H CH-76
CHAPTER 59 OPERATIONS SPECIALIST (OS) NAVPERS 18068-59H CH-76 TABLE OF CONTENTS OPERATIONS SPECIALIST (OS) SCOPE OF RATING GENERAL INFORMATION COMBAT AIR CONTROLLER AIR WARFARE (AW) OPERATIONS AMPHIBIOUS
CHAPTER 12 NAVAL AIRCREWMAN (AW) NAVPERS H CH-63
CHAPTER 12 NAVAL AIRCREWMAN (AW) NAVPERS 18068-12H CH-63 Updated: July 2015 TABLE OF CONTENTS NAVAL AIRCREWMEN (HELICOPTER) (AWS) SCOPE OF RATING GENERAL INFORMATION HELICOPTER WARFARE SPECIALIST AIRBORNE
CHAPTER 79 YEOMAN (YN) NAVPERS F CH-74
CHAPTER 79 YEOMAN (YN) NAVPERS 18068-79F CH-74 TABLE OF CONTENTS YEOMAN (YN) SCOPE OF RATING GENERAL INFORMATION ADMINISTRATIVE ASSISTANT CORRESPONDENCE LEGAL SECURITY TECHNICAL ADMINISTRATION TRAVEL ADMINISTRATIVE
CHAPTER 47 LOGISTICS SPECIALIST (LS) NAVPERS B CH-73
CHAPTER 47 LOGISTICS SPECIALIST (LS) NAVPERS 18068-47B CH-73 SCOPE OF RATING GENERAL INFORMATION POSTAL CLERK ADMINISTRATION FINANCIAL INSPECTION AND EVALUATION LOGISTICS MANAGEMENT SECURITY LOGISTICS
CHAPTER 20 CRYPTOLOGIC TECHNICIAN (CT) NAVPERS I CH-65
CHAPTER 20 CRYPTOLOGIC TECHNICIAN (CT) NAVPERS 18068-20I CH-65 Updated: January 2016 TABLE OF CONTENTS CRYPTOLOGIC TECHNICIAN (TECHNICAL) (CTT) SCOPE OF RATING GENERAL INFORMATION ELECTRONIC INTELLIGENCE
CHAPTER 12 NAVAL AIRCREWMEN (AW) NAVPERS G CH-62
CHAPTER 12 NAVAL AIRCREWMEN (AW) NAVPERS 18068-12G CH-62 Updated: April 2015 TABLE OF CONTENTS NAVAL AIRCREWMEN (TACTICAL HELICOPTER) (AWR) SCOPE OF RATING GENERAL INFORMATION TACTICAL MULTI-SENSOR OPERATOR
CHAPTER 32 ELECTRONICS TECHNICIAN (ET) NAVPERS G CH-66
CHAPTER 32 ELECTRONICS TECHNICIAN (ET) NAVPERS 18068-32G CH-66 Updated: October 2016 TABLE OF CONTENTS ELECTRONICS TECHNICIAN, SUBMARINE, NAVIGATION (ETV) SCOPE OF RATING GENERAL INFORMATION SUBMARINE
CHAPTER 67 INFORMATION SYSTEMS TECHNICIAN (IT) NAVPERS G CH-65
CHAPTER 67 INFORMATION SYSTEMS TECHNICIAN (IT) NAVPERS 18068-67G CH-65 Updated: January 2016 TABLE OF CONTENTS INFORMATION SYSTEMS TECHNICIAN (IT) SCOPE OF RATING GENERAL INFORMATION INFORMATION TECHNOLOGY
CHAPTER 79 YEOMAN (YN) NAVPERS A CH-73
CHAPTER 79 YEOMAN (YN) NAVPERS 18068-79A CH-73 TABLE OF CONTENTS YEOMAN (SUBMARINE) (YNS) SCOPE OF RATING GENERAL INFORMATION SUBMARINE ADMINISTRATIVE ASSISTANT CORRESPONDENCE LEGAL SECURITY TECHNICAL
ELECTRIC DRAFTING TECHNICIAN I ELECTRIC DRAFTING TECHNICIAN II
CITY OF ROSEVILLE ELECTRIC DRAFTING TECHNICIAN I ELECTRIC DRAFTING TECHNICIAN II DEFINITION To perform a variety of technical engineering drafting and mapping duties related to the design, construction,
Biomedical Equipment Technician
Biomedical Equipment Technician Occupational Skill Stards Texas Skill Stards Board Recognized Critical Work Function 1. Install Biomedical Equipment 1.1 Receive, inspect inventory upon delivery 1.2 Deliver
Apprenticeship Training Standard. Schedule of Training. Draftsperson Mechanical. Trade Code: 614A
Apprenticeship Training Standard Schedule of Training Draftsperson Mechanical Trade Code: 614A Development Date: March 2000 NOTICE OF COLLECTION OF PERSONAL INFORMATION 1. At any time during your apprenticeship
Safety (OSHA 10 hour)
Construction Technology Core and Sustainable Construction Subject Code: 178000 Students will learn principles in basic safety (10-hr OSHA), construction math, hand and power tool are and operation, blueprint
CHAPTER 20 CRYPTOLOGIC TECHNICIAN (CT) NAVPERS J CH-72
CHAPTER 20 CRYPTOLOGIC TECHNICIAN (CT) NAVPERS 18068-20J CH-72 Updated: October 2017 TABLE OF CONTENTS CRYPTOLOGIC TECHNICIAN (TECHNICAL) (CTT) SCOPE OF RATING GENERAL INFORMATION TECHNICAL ELECTRONIC
Canadian Technology Accreditation Criteria (CTAC) CIVIL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC)
Canadian Technology Accreditation Criteria (CTAC) CIVIL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) Preamble These CTAC are applicable to programs having titles involving
Class Title Description Credit Hours Contact Hours Lecture Hours Lab Hours ESU NOTE
2 3 4 AIT 1010 Construction Measurements and Calculations Course covers fundamental measuring and calculation skills essential to the skilled craftsperson working in the construction industry. Provides
i-tech SERVICES DELIVERING INTEGRATED SERVICES AND PRODUCTS ACROSS THE FIELD LIFE CYCLE
i-tech SERVICES DELIVERING INTEGRATED SERVICES AND PRODUCTS ACROSS THE FIELD LIFE CYCLE 3 About us 4 What we do 6 Why choose us? 7 Service and product capabilities OUR VALUES Safety Integrity Innovation
Drafting I. IC61 Summer TRADE AND INDUSTRIAL EDUCATION Career and Technical Education
Drafting I TRADE AND INDUSTRIAL EDUCATION Career and Technical Education IC61 Summer 2013 PUBLIC SCHOOLS OF NORTH CAROLINA State Board of Education Department of Public Instruction www.ncpublicschools.org
Technology Accreditation Canada (TAC) SURVEY/GEOMATICS TECHNOLOGY TECHNOLOGIST Canadian Technology Accreditation Criteria (CTAC)
Technology Accreditation Canada (TAC) SURVEY/GEOMATICS TECHNOLOGY TECHNOLOGIST Canadian Technology Accreditation Criteria (CTAC) Preamble These CTAC are applicable to programs having titles involving Survey/Geomatics
BENEFITS OF A DUAL-ARM ROBOTIC SYSTEM
Part one of a four-part ebook Series. BENEFITS OF A DUAL-ARM ROBOTIC SYSTEM Don t just move through your world INTERACT with it. A Publication of RE2 Robotics Table of Contents Introduction What is a Highly
Drafting & Design Technology
131 Location: Library Tower - 2nd Floor Program Information Every new structure or machine starts out as the idea of a designer or an engineer. It is only through the knowledge and ability of highly skilled
Florida Department of Education CURRICULUM FRAMEWORK
Florida Department of Education CURRICULUM FRAMEWORK July 2001 Program Title: Occupational Area: Blueprint Reading and Estimation Industrial Education PSAV Program Numbers I469919 CIP Number 0646.999901
TRAFFIC SIGNAL ELECTRICIAN, 3819
01-31-92 TRAFFIC SIGNAL ELECTRICIAN, 3819 Summary of Duties: A Traffic Signal Electrician performs skilled technical work and acts as a lead for and works with a signal construction crew constructing,
Graduate in Food Engineering. Program Educational Objectives and Student Outcomes
1. Program Educational Objectives and Student Outcomes A graduate in Food Engineering is a professional specially trained to plan design and implementation of projects and production processes in the food
Engineering and Environmental Services Salary Survey
2014 Engineering and Environmental Services Salary Survey Executive Summary 8575 164 th Ave NE, Suite 100 Redmond, WA 98052 USA Telephone: 877.210.6563 Fax: 877.239.2457 Email: survey.sales@erieri.com
Work Type Definition and Submittal Requirements 14.6 Signing Plan Design & Special Provisions. Work Type Definition
Work Type Definition Pages 1-3 detail the work type definition. In order to become pre-qualified for this work type, please see the Work Type Submittal Requirements on pages 4-6. I. Description Signing
Canadian Technology Accreditation Criteria (CTAC) MECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC)
Preamble Canadian Technology Accreditation Criteria (CTAC) MECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) These CTAC are applicable to programs having titles involving
Transportation Research Board National Academy of Sciences Committee on Naval Engineering in the 21 st Century. Washington, DC 12 January 2010
Transportation Research Board National Academy of Sciences Committee on Naval Engineering in the 21 st Century Washington, DC 12 January 2010 Workshop: Examining the Science and Technology Enterprise in
CHAPTER 64 PERSONNEL SPECIALIST (PS) NAVPERS A CH-56
CHAPTER 64 PERSONNEL SPECIALIST (PS) NAVPERS 18068-64A CH-56 Updated: October 2013 TABLE OF CONTENTS PERSONNEL SPECIALIST (PS) SCOPE OF RATING GENERAL INFORMATION PAY CLERK AUTOMATED DATA PROCESSING (ADP)
Computer-Aided Drafting and Design Technology, A.A.S.
Johnson County Community College 1 Computer-Aided Drafting and Design Technology, A.A.S. Drafting technicians are engineering communication specialists who apply mathematics, computer applications and
Model Curriculum. Draughtsman SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Model Curriculum Construction Real Estate and Infrastructure Construction Draughting CON/Q1301 4 2 TABLE OF CONTENTS 1. Curriculum 04 2. Trainer Prerequisites
ELEMENTS OF CIVIL ENGINEERING (110004) MARKS DISTRIBUTION AND IMPORTANT QUESTIONS OF ALL THE UNITS
ELEMENTS OF CIVIL ENGINEERING (110004) MARKS DISTRIBUTION AND IMPORTANT QUESTIONS OF ALL THE UNITS Unit-1 SCOPE OF CIVIL ENGINEERING One or two Questions are generally asked from this Unit the weightage
PWC SUMMER INTERN JOB DESCRIPTIONS 2019
PWC SUMMER INTERN JOB DESCRIPTIONS 2019 Finance Division Accounting/Audit Internal Auditor/Accounting Clerk: Student should be working toward a degree in Finance, Accounting or Business. Duties include
Drafting. Drafting and Design Technician
Drafting and Design Technician Program Description This program is designed to provide students with entry level skills in the fields of mechanical, electrical, civil and architectural drafting and/or
InterMoor Innovation in Action. InterMoor: USA Mexico Brazil Norway Singapore & Malaysia UK West Africa
InterMoor Innovation in Action InterMoor: USA Mexico Brazil Norway Singapore & Malaysia UK West Africa InterMoor is an Acteon Company linking subsea services 3 InterMoor Services MOORINGS Rig Moves Permanent
Computer Technology. Broad-based Courses
Computer Technology Broad-based Courses TEJ3E Computer Technology, Grade 11, Workplace Preparation Name: This job may allow employees to develop the knowledge and skills related to computer hardware, networks,
OBSERVATORY SERVICING AND MAINTENANCE
OBSERVATORY SERVICING AND MAINTENANCE How to deploy and maintain a network of observatories around Europe? We don t built what we cannot maintain! Jean-François DROGOU IFREMER Steve ETCHEMENDY M.B.A.R.I
Keeping Your House in order?
Keeping Your House in order? A view on Safety Reviews from UK Offshore experience Ian Wright Business Development Director, Upstream DNV Energy, Europe & North Africa March 2009 Introduction Safety Performance
TECHNOLOGY EDUCATION
TECHNOLOGY EDUCATION Graduation Requirement: All students must earn one credit in Arts or Career & Technical Education classes. COURSE TITLE CREDITS GRADES OFFERED Communications Pathway-Media* Introduction
CHAPTER 20 CRYPTOLOGIC TECHNICIAN (CT) NAVPERS L CH-71
CHAPTER 20 CRYPTOLOGIC TECHNICIAN (CT) NAVPERS 18068-20L CH-71 Updated: July 2017 TABLE OF CONTENTS CRYPTOLOGIC TECHNICIAN (COLLECTIONS) (CTR) SCOPE OF RATING GENERAL INFORMATION ANALYST AND REPORTER FIREPOWER
PROCESSING RECORD SCRIPPS INSTITUTION OF OCEANOGRAPHY ARCHIVES. University of California Division of War Research Reports,
Accession No.: 86-47 PROCESSING RECORD SCRIPPS INSTITUTION OF OCEANOGRAPHY ARCHIVES University of California Division of War Research University of California Division of War Research Reports, 1942-1946
JOB DESCRIPTION. Coachella Valley Water District October 12, DEPARTMENT: Facilities and Maintenance REPORTING RELATIONSHIP:
Coachella Valley Water District October 12, 2017 TITLE: Electronic Technician II SECTION: Electronics Shop DEPARTMENT: Facilities and Maintenance REPORTING RELATIONSHIP: Reports to: Electronics Supervisor,
ENGINEERING TECHNOLOGY PROGRAMS
Engineering Technology Accreditation Commission CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Reviews during the 2019-2020 Accreditation Cycle Incorporates all changes approved
Certificate. Estimated Program Length & Cost *
159 The College for Real Careers (DDT) Program Information Average Full-Time Wage Every new structure or machine starts out as the idea of a designer or an engineer. It is only through the knowledge and
The New CTE Includes Trades and Professions. Lawrence Rice Kealakehe High School
The New CTE Includes Trades and Professions Lawrence Rice Kealakehe High School Lawrence_Rice@notes.k12.hi.us larryjrice@hotmail.com IET Pathways (Industrial and Engineering Technology) Program of Study
CHAPTER 5 AEROGRAPHER'S MATE (AG) NAVPERS D CH-63
CHAPTER 5 AEROGRAPHER'S MATE (AG) NAVPERS 18068-5D CH-63 Updated: July 2015 SCOPE OF RATING GENERAL INFORMATION TABLE OF CONTENTS AEROGRAPHER'S MATE (AG) METEOROLOGICAL AND OCEANOGRAPHIC (METOC) ANALYST
AFRICA FUGRO MOZAMBIQUE. UNDERSTANDING your operational objectives. TACKLING your complex challenges. DELIVERING your global success stories
AFRICA FUGRO MOZAMBIQUE UNDERSTANDING your operational objectives TACKLING your complex challenges DELIVERING your global success stories FUGRO MOZAMBIQUE Fugro Mozambique provides diving and ROV support,
EGYPTIAN HYDROGRAPHIC DEPARTMENT THE EGYPTIAN HYDROGRAPHIC FRAMEWORK
gvt THE EGYPTIAN HYDROGRAPHIC FRAMEWORK The roles of a national Hydrographic Service can be summarized in collecting georeferenced data through systematic surveys at sea and along the coast related to:
Drafting Careers. Description. Lesson Objectives. Assumptions
Youth Explore Trades Skills Description This Activity Plan introduces students to various drafting-related occupations. Drafting is foundational to most trades careers, including supervisory positions
Services Overview. Northeast Blueprint
Services Overview 2D CAD Conversions Paper to CAD 2D CAD Conversions Construction Engineering / CAD Services Construction Markups Consultant Drawings Coordinated Drawings As -Builts Steel Structural Detailing
ROVO 2201 (ROV Operations)
ROVO 2201 (ROV Operations) TYPE AND PUR POSE: This course is designed to instruct students in the proficient and safe operation of underwater robotic systems throughout their full range of subsea applications.
Aviation Electricity and Electronics Power Generation and Distribution
NONRESIDENT TRAINING COURSE February 2002 Aviation Electricity and Electronics Power Generation and Distribution NAVEDTRA 14323 DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
Northeast Alabama Community College
Student Attainment of General Education and Program Learning Outcomes Learning Outcomes Summary Report: 2016-2017 Academic Year Written Communication Students will demonstrate adequate writing skills by
Position Announcement
Drafting Technician II Position Announcement Skagit PUD is seeking a Drafting Technician II. Position will perform drafting tasks and limited engineering design to assist the District in preparing construction
MATERIALS DIVISION MEMORANDUM
MATERIALS DIVISION MEMORANDUM GENERAL SUBJECT: Precast Concrete and Concrete Pipe Quality Control/Quality Assurance Programs SPECIFIC SUBJECT: Sections 204.22(c), 204.26(d) and Minimum Acceptance Sampling
Cabrillo College Catalog
ENGINEERING TECHNOLOGY Natural and Applied Sciences Division Wanda Garner, Division Dean Division Office, Room 701 Gary Marcoccia, Program Chair, (831) 479-5705 Aptos Counselor: (831) 479-6274 for appointment
BOARD OF TECHNICAL EDUCATION, UTTAR PRADESH Question Paper Account for Special Back Paper Examination (December Exam)
Page 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 0001 DESIGN OF STEEL & MASONARY STRUCTURES 0002 TRANSPORTATION ENGINEERING 0003 DESIGN OF
STEP ONE : Focus Your Federal Job Search
OCCUPATIONAL S AND SERIES FIND YOUR JOB TITLES HANDBOOK OF OCCUPATIONAL S AND SERIES U.S. Office of Personnel Management Office of Classification; Washington, DC GS-000 MISCELLANEOUS OCCUPATIONS (NOT ELSEWHERE
The CAD Technician s Role in Office Practice and Procedure
COMMERCIAL DRAFTING AND DETAILING 4TH EDITION JEFFERIS SOLUTIONS MANUAL Full download at: https://testbankreal.com/download/commercial-drafting-detailing-4th-editionjefferis-solutions-manual/ Chapter 2
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Evaluations During the 2005-2006 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of November
Great Reasons to Build Your Career in North East England. Subsea, Marine, and Offshore
Great Reasons to Build Your Career in North East England Subsea, Marine, and Offshore There are many great reasons to build your career in North East England. This presentation, developed through a partnership
Canadian Technology Accreditation Criteria (CTAC) ELECTROMECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC)
Canadian Technology Accreditation Criteria (CTAC) ELECTROMECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) Preamble These CTAC are applicable to programs having titles