PERIYAR CENTENARY POLYTECHNIC COLLAGE Manufacturing Technology - II SUBCODE: MEB520 UNIT- I PART-A

Size: px
Start display at page:

Download "PERIYAR CENTENARY POLYTECHNIC COLLAGE Manufacturing Technology - II SUBCODE: MEB520 UNIT- I PART-A"

Transcription

1 PERIYAR CENTENARY POLYTECHNIC COLLAGE Manufacturing Technology - II 1. List out the cutting tool materials. 2. Define rake angle. 3. Define clearance angle. 4. What is meant by drilling? 5. What is the use of sleeve? 6. What is boring? 7. Define tapping. 8. What are the types of boring tools? SUBCODE: MEB520 UNIT- I 9. What are the types of chip breakers? 10. Give two application of deep hole drilling? 11. What is the importance of jig boring machine? 12. What are the types of boring machine? 13. Write the purpose of flutes in twist drill. 14. Define single point cutting tool. 15. What are the types of drill? 1. A) Define properties of cutting tool materials. B) Write the factors influencing tool life. 2. Explain about nomenclature of twist drill. 3. Explain about upright drilling machine with neat sketch & State its salient feature. 4. Explain about radial drilling machine with neat sketch & also define its types. 5. A) Explain any three methods of holding drill bit in drilling machine. B) Write the special features of a fine boring machine. 6. Explain the operations that can be carried out in drilling machine. 7. Describe about horizontal boring machine with neat sketch.

2 UNIT-II 1. List the reciprocating type machine tools. 2. Write any two specifications of planer. 3. Write any two differences between planer & shaper. 4. Write the advantages of hydraulic drives. 5. Name the types of planer. 6. State the uses of planer. 7. Name types of quick return mechanisms used in planer. 8. Name types of quick return mechanisms used in shaper. 9. What are the various types of slotting machine? 10. Name the types of shaper. 11. State the function of rotary table in a slotter. 12. What is the main use of universal shaper? 13. What is the function of saddle of a slotter? 14. Name the slotted operations. 15. What is draw cut shaper? 1. Describe about double housing planer with neat sketch. 2. Explain with neat sketch the open and cross belt drive mechanism of a planer machine 3. Explain with neat sketch the crank and slotted link quick return mechanism of a shaper machine. 4. Explain about whit worth quick return mechanism of a slotter machine. 5. Explain about standard shaper machine with neat sketch. 6. Explain about slotted machine with neat sketch. 7. A) Write the specifications of a shaper machine. B) What are the various work holding devices used in shaper. 8. A) Explain about automatic feed mechanism used in slotter. B) Explain about automatic table feed in planer.

3 UNIT-III 1. Define milling process. 2. Mention two advantages of gear hobbing process. 3. What are the cutter holding devices? 4. What is the use of fly cutter? 5. Define face milling. 6. What is meant by indexing? 7. What is cam milling? 8. Write any four type of milling cutter. 9. Define End milling cutters. 10. Write the different methods of gear generating process. 11. Name different methods of gear finishing process. 12. State any two limitations of gear shaping process. 13. List the materials used for making gears. 14. Mention two advantages of aluminium as gear material. 15. Write the methods of gear forming. 1. Describe with neat sketch the construction and operation of a. Plain milling machine b. Universal milling machine 2. A) Explain the vertical milling machine with neat sketch. B) Explain gang milling & straddle milling operations. 3. Explain with neat sketch the arbour of milling machine. 4. Explain materials used for manufacturing gear materials. 5. Explain any two gear generating process with neat sketch. 6. Explain following gear finishing process with neat sketch. a. Gear burnishing b. Gear grinding 7. State various work holding devices used in milling machine. 8. Explain: a) Climb milling process b) Gear lapping process

4 UNIT-IV 1. What are the types of broaching machines? 2. What is glazing of grinding wheels? 3. Name any four broaches. 4. What is plunge grinding? 5. Name the methods of centre less grinding. 6. What is broaching? 7. What is grinding? 8. Name the abrasives used for making grinding wheels. 9. State the purpose of grinding. 10. What is meant by dressing? 11. What is meant by truing? 12. What is meant by grit or grain size? 13. What is meant by bond? 14. Write the types of bond. 15. What are types of grinding wheel? 1. Explain about cylindrical grinding machine with neat sketch. 2. A) Explain about centre less grinding machine with neat sketch. B) Explain about standard marking system of grinding wheels. 3. A) Explain the types of bonds used in grinding wheel. B) Explain about universal centre type grinders. 4. State the factors to be considered in selection of grinding wheel. 5. Explain mounting of grinding wheel with neat sketch. 6. A) Explain balancing of grinding wheel with neat sketch. B) Explain methods of centre less grinding machine with neat sketch. 7. A) Explain any three broaching machine operations. B) Explain horizontal broaching machine with neat sketch. 8. Explain about continuous broaching machines with neat sketch.

5 UNIT-V 1. What is press? 2. What is plasma? 3. What is fool proof in a jig? 4. What is LASER? 5. What is the purpose of V locators? 6. What are the various types of clamps? 7. Define jig. 8. Name the different type of locators used in jig. 9. Define fixture. 10. Write any two advantages of electrical discharge machining. 11. Write any two applications of ultrasonic machining. 12. Differentiate jig & fixture. 13. What is the use of compound die? 14. Write the types of fixtures. 15. What is meant by curling? 1. A) Explain about mechanical press. B) Write types of fixtures & explain any two fixtures. 2. A) Explain about hydraulic press with neat sketch. B) State advantages & disadvantages of ultrasonic machining. 3. Briefly explain types of mechanical actuating clamps used in jigs & fixtures. 4. Explain any six types of press working operations with neat sketch. 5. Explain Electrochemical grinding process with neat sketch and also state its advantages, disadvantages & applications. 6. Explain Electrical discharge machining process with neat sketch and also state its applications, advantages & disadvantage. 7. Explain Plasma arc machining process with neat sketch and also state its applications, advantages & disadvantages. 8. Explain Laser beam machining process with neat sketch and also state its applications, advantages & disadvantages. *******

VALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK ME6402 MANUFACTURING TECHNOLOGY II UNIT-I PART A 1. List the various metal removal processes? (BT1) 2. Explain how chip

More information

DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK ME6402 MANUFACTURING TECHNOLOGY II UNIT I PART A 1. List the various metal removal processes? 2. How chip formation occurs in metal cutting? 3. What is

More information

DIRECTORATE OF TECHNICAL EDUCATION DIPLOMA IN MECHANICAL ENGINEERING. M SCHEME onwards II YEAR IV SEMESTER CURRICULUM DEVELOPMENT CENTRE

DIRECTORATE OF TECHNICAL EDUCATION DIPLOMA IN MECHANICAL ENGINEERING. M SCHEME onwards II YEAR IV SEMESTER CURRICULUM DEVELOPMENT CENTRE DIRECTORATE OF TECHNICAL EDUCATION DIPLOMA IN MECHANICAL ENGINEERING M SCHEME 2015-2016 onwards II YEAR IV SEMESTER 32042 SPECIAL MACHINES CURRICULUM DEVELOPMENT CENTRE Curriculum Development Centre, DOTE.

More information

Scheme - G. Sample Test Paper-I

Scheme - G. Sample Test Paper-I Sample Test Paper-I Marks : 25 Time:1 hour 1. All questions are compulsory. 2. Illustrate your answers with neat sketches wherever necessary. 3. Figures to the right indicate full marks. 4. Assume suitable

More information

ABRASIVE PROCESSES AND BROACHING

ABRASIVE PROCESSES AND BROACHING UNIT 4 www.studentsfocus.com ABRASIVE PROCESSES AND BROACHING 1. What are the types of surfaces that could de produced using plain cylindrical grinders? Plain cylindrical parts, cylindrical parts, cylinders,

More information

Machinist NOA (1998) Subtask to Unit Comparison

Machinist NOA (1998) Subtask to Unit Comparison Machinist NOA (1998) Subtask to Unit Comparison NOA Subtask Task 1 Demonstrates safe working practices. 1.01 Recognizes potential health and safety hazards. A1 Safety in the Machine Shop 1.02 Recognizes

More information

DEPARTMENT OF MECHANICAL ENGINEERING

DEPARTMENT OF MECHANICAL ENGINEERING SCSVMV UNIVERSITY DEPARTMENT OF MECHANICAL ENGINEERING SUBJECT NAME : SUBJECT CODE : MANUFACTURING TECHNOLOGY-II EBM4DT055 QUESTION BANK UNIT-1 1. What is Grinding? 2. Briefly classify the Grinding Process.

More information

Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering

Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering LABORATORY MANUAL For the students of Department of Mechanical and Production Engineering 1 st

More information

TIMTOS 2017 EXHIBITS PROFILE

TIMTOS 2017 EXHIBITS PROFILE TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes

More information

SHAPER, MILLING AND GEAR CUTTING MACHINES

SHAPER, MILLING AND GEAR CUTTING MACHINES UNIT 3 SHAPER, MILLING AND GEAR CUTTING MACHINES 1. Compare hydraulic shaper with mechanical shaper? SL.NO Hydrulic shaper Mechanical shaper 1. smooth cutting operation Rough and noisy cutting operation

More information

PLANING MACHINE. Crossrail. Tool head. Table. Table. reciprocating movement Roller. Bed. Open Side Planer Sketch S-8.1-A. Feed screws.

PLANING MACHINE. Crossrail. Tool head. Table. Table. reciprocating movement Roller. Bed. Open Side Planer Sketch S-8.1-A. Feed screws. 8 PLANING MACHINE A8.1 : Planing Machine Tool head Table reciprocating movement Roller Table Cross-rail Bed Column Open Side Planer Sketch S-8.1-A Introduction This is also a reciprocating type of machine

More information

Roll No. :.. Invigilator s Signature :.. CS/B.Tech (ME)/SEM-5/ME-504/ TECHNOLOGY OF MACHINING. Time Allotted : 3 Hours Full Marks : 70

Roll No. :.. Invigilator s Signature :.. CS/B.Tech (ME)/SEM-5/ME-504/ TECHNOLOGY OF MACHINING. Time Allotted : 3 Hours Full Marks : 70 Name : Roll No. :.. Invigilator s Signature :.. CS/B.Tech (ME)/SEM-5/ME-504/2009-10 2009 TECHNOLOGY OF MACHINING Time Allotted : 3 Hours Full Marks : 70 The figures in the margin indicate full marks. Candidates

More information

SUBJECT CODE NO:- K-53 FACULTY OF ENGINEERING AND TECHNOLOGY T.E.(Mech) Examination Oct/Nov 2016 A:-Tool Engineering (OLD)

SUBJECT CODE NO:- K-53 FACULTY OF ENGINEERING AND TECHNOLOGY T.E.(Mech) Examination Oct/Nov 2016 A:-Tool Engineering (OLD) Total No. of Printed Pages:2 [Time: Four Hours] N.B SUBJECT CODE NO:- K-53 FACULTY OF ENGINEERING AND TECHNOLOGY T.E.(Mech) Examination Oct/Nov A:-Tool Engineering (OLD) Please check whether you have got

More information

UNIT 5: Indexing: Simple, compound, differential and angular indexing calculations. Simple problems on simple and compound indexing.

UNIT 5: Indexing: Simple, compound, differential and angular indexing calculations. Simple problems on simple and compound indexing. UNIT 5: Milling machines: Classification, constructional features, milling cutters nomenclature, milling operations, up milling and down milling concepts. Indexing: Simple, compound, differential and angular

More information

U.S. Census Bureau Metalworking Machinery MQ333W(08)-5 Issued August 2009

U.S. Census Bureau Metalworking Machinery MQ333W(08)-5 Issued August 2009 U.S. Census Bureau Metalworking Machinery - 2008 MQ333W(08)-5 Issued August 2009 Address inquiries concerning these data to Investment Goods Industries Branch, U.S. Department of Commerce, Census Bureau,

More information

Manufacturing Science-II (EME-503)

Manufacturing Science-II (EME-503) Time: 1 Hour B.Tech. [SEM V (ME-5 All Groups)] QUIZ TEST-1 Manufacturing Science-II ` Max. Marks: 30 Note: Attempt all the questions Q1) How metal is removed in metal cutting? Explain by giving any simple

More information

Ch. 1 Theory of Metal Cutting

Ch. 1 Theory of Metal Cutting Ch. 1 Theory of Metal Cutting May 1 Nov - 1 1. Explain types of chips that occur in metal cutting. Why a built up edge on a tool is undesirable and also explain reason behind various chip formation. 4

More information

Manufacturing Process

Manufacturing Process Unit 10: Manufacturing Process Unit code: H/601/1487 QCF level: 4 Credit value: 15 Aim This unit will develop learners knowledge of manufacturing processes and techniques that can be applied to a range

More information

SHAPING AND PLANING Shaping and planing

SHAPING AND PLANING Shaping and planing SHAPING AND PLANING Shaping and planing the simplest of all machine operations Straight line cutting motion with single-point cutting tool creates smooth flat surfaces. Mainly plain surfaces are machined

More information

Materials Removal Processes (Machining)

Materials Removal Processes (Machining) Chapter Six Materials Removal Processes (Machining) 6.1 Theory of Material Removal Processes 6.1.1 Machining Definition Machining is a manufacturing process in which a cutting tool is used to remove excess

More information

Lecture 18. Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing

Lecture 18. Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing Lecture 18 Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing For production of: Flat surfaces Grooves Notches Performed on long (on average 10 m) workpieces Workpiece moves / Tool

More information

MILLING and GRINDING MACHINES Machine Tools

MILLING and GRINDING MACHINES Machine Tools ELEMENTS OF MECHANICAL ENGINEERING PART B UNIT VI MILLING and GRINDING MACHINES Machine Tools 1 Objectives: 1.1 To understand the Principle of working of Milling, Horizontal & Vertical Milling. 1.2 Classification/Types

More information

0DQXIDFWXULQJ 7HFKQRORJ\,,

0DQXIDFWXULQJ 7HFKQRORJ\,, 0DQXIDFWXULQJ 7HFKQRORJ\,, (For B.E. Mechanical Engineering Students) Dr. S.Ramachandran, M.E., Ph.D., Professor and Head R. Thamarai Kannan, M.Tech., Assistant Professor Department of Mechanical Engineering

More information

Lathe IES 2001 IES Example

Lathe IES 2001 IES Example Lathe IES 2001 The spindle speed range in a general purpose lathe is divided into steps which approximately follow (a) Arithmetic progression (b) Geometric progression (c) Harmonic progression (d) Logarithmic

More information

: ADVANCED PRODUCTION PROCESSSES COURSE CODE : 6021 COURSE CATEGORY : A PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5

: ADVANCED PRODUCTION PROCESSSES COURSE CODE : 6021 COURSE CATEGORY : A PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 COURSE TITLE : ADVANCED PRODUCTION PROCESSSES COURSE CODE : 6021 COURSE CATEGORY : A PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE MODULE TOPIC PERIODS 1 Turret and Capstan lathes,

More information

APPENDIX A TOOLMAKER D.O.T. CODE O*NET CODE As Revised for MACNY, The Manufacturers Association

APPENDIX A TOOLMAKER D.O.T. CODE O*NET CODE As Revised for MACNY, The Manufacturers Association STATE OF NEW YORK DEPARTMENT OF LABOR APPENDIX A TOOLMAKER D.O.T. CODE 601.280-042 O*NET CODE 51-4111.00 As Revised for MACNY, The Manufacturers Association This training outline is a minimum standard

More information

INTRODUCTION TO GRINDING PROCESS

INTRODUCTION TO GRINDING PROCESS GRINDING PART 2 Grinding Grinding is a material removal process accomplished by abrasive particles that are contained in a bonded grinding wheel rotating at very high surface speeds. The rotating grinding

More information

MEB560 MANUFACTURING TECHNOLOGY - II PRACTICAL

MEB560 MANUFACTURING TECHNOLOGY - II PRACTICAL MEB560 MANUFACTURING TECHNOLOGY - II PRACTICAL OBJECTIVES: Identify a milling machine and its parts Identify a cylindrical grinder, surface grinder and tool and cutter grinder Identify the tools and instruments

More information

Design for machining

Design for machining Multiple choice questions Design for machining 1) Which one of the following process is not a machining process? A) Planing B) Boring C) Turning D) Forging 2) The angle made between the rake face of a

More information

COURSE TITLE : ADVANCED PRODUCTION PROCESS COURSE CODE : 4028 COURSE CATEGORY : A PERIODS/WEEK : 5 PERIODS/SEMESTER : 90 CREDITS : 4

COURSE TITLE : ADVANCED PRODUCTION PROCESS COURSE CODE : 4028 COURSE CATEGORY : A PERIODS/WEEK : 5 PERIODS/SEMESTER : 90 CREDITS : 4 COURSE TITLE : ADVANCED PRODUCTION PROCESS COURSE CODE : 4028 COURSE CATEGORY : A PERIODS/WEEK : 5 PERIODS/SEMESTER : 90 CREDITS : 4 TIME SCHEDULE MODULE TOPICS PERIODS 1 Capstan and turret Lathe 21 Automatic

More information

LANDMARK UNIVERSITY, OMU-ARAN

LANDMARK UNIVERSITY, OMU-ARAN LANDMARK UNIVERSITY, OMU-ARAN LECTURE NOTE: DRILLING. COLLEGE: COLLEGE OF SCIENCE AND ENGINEERING DEPARTMENT: MECHANICAL ENGINEERING PROGRAMME: MECHANICAL ENGINEERING ENGR. ALIYU, S.J Course code: MCE

More information

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified) SUMMER 16 EXAMINATION

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified) SUMMER 16 EXAMINATION Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2) The model answer and the answer written by candidate

More information

SURFACE FINISHING GRINDING MACHINES

SURFACE FINISHING GRINDING MACHINES SURFACE FINISHING GRINDING MACHINES Introduction :- Grinding is a metal cutting operation which is performed by means of a rotating abrasive wheel acts as a cutting tool. Material removal is in the form

More information

MANUFACTURING TECHNOLOGY

MANUFACTURING TECHNOLOGY MANUFACTURING TECHNOLOGY UNIT V Machine Tools Milling cutters Classification of milling cutters according to their design HSS cutters: Many cutters like end mills, slitting cutters, slab cutters, angular

More information

061 MECHANICAL ENGINEERING CRAFT PRACTICE

061 MECHANICAL ENGINEERING CRAFT PRACTICE 061 MECHANICAL ENGINEERING CRAFT PRACTICE EXAMINATION STRUCTURE The examination for this syllabus wills cover the underlisted two major areas of groupings and 193 Building/Engineering Drawing as the related

More information

Chapter 24. Machining Processes Used to Produce Various Shapes: Milling, Broaching, Sawing, and Filing; Gear Manufacturing

Chapter 24. Machining Processes Used to Produce Various Shapes: Milling, Broaching, Sawing, and Filing; Gear Manufacturing Chapter 24 Machining Processes Used to Produce Various Shapes: Milling, Broaching, Sawing, and Filing; Gear Manufacturing Parts Made with Machining Processes of Chapter 24 Figure 24.1 Typical parts and

More information

1

1 www.icwahelpn.co.in 1 Operation Management Objective Type Question s and Answer s 1. Fill up the blanks: 1. Intension of modern industries is to create appropriate number of useful at reasonable price.

More information

MLR Institute of Technology

MLR Institute of Technology MLR Institute of Technology Dundigal, Quthbullapur (M), Hyderabad 500 043 MECHANICAL ENGINEERING MACHINE TOOLS OBJECTIVE QUESTIONS UNIT - I 1. A built up-edge is formed while machining [ B ] (Sep-2011,

More information

Metropolitan Community College COURSE OUTLINE FORM LEC: 9 LAB:

Metropolitan Community College COURSE OUTLINE FORM LEC: 9 LAB: Course Title: Machine Tool II Course Prefix & No.: PRMA 1402 LEC: 9 LAB: 0 Credit Hours: 9 COURSE DESCRIPTION: Students construct basic machine projects using various pieces of shop equipment including

More information

Machining Processes Turning

Machining Processes Turning Machining Review Questions - Page 2 Machining Processes Turning 1. Identify the cutting parameters (speed, feed and depth of cut) for the turning process. 2. Identify the basic parts of the lathe machine

More information

INDEX. S.No. Name of the Experiment Page No.

INDEX. S.No. Name of the Experiment Page No. MACHINE TOOLS LAB INDEX S.No. Name of the Experiment Page No. 1 Step Turning and Taper Turning on Lathe 2 Thread Cutting and Knurling on Lathe 3 Machining Flat Surface using Shaper Machine 4 Manufacturing

More information

TYPES OF LATHE. Bench lathe It is mounted on bench, and has the same features like engine lathe

TYPES OF LATHE. Bench lathe It is mounted on bench, and has the same features like engine lathe TYPES OF LATHE 1. Speed Lathe a) Wood working b) Centering c) Polishing d) Spinning 2. Engine lathe a) Belt drive b) Individual motor drive c) Gear head lathe 3. Bench lathe 4. Tool room lathe 5. Capstan

More information

AL AMEEN ENGINEERING COLLEGE, ERODE

AL AMEEN ENGINEERING COLLEGE, ERODE AL AMEEN ENGINEERING COLLEGE, ERODE 638104. DEPARTMENT OF MECHANICAL ENGINEERING. Question Bank MANUFACTURING TECHNOLOGY II Prepared By : M. VEERAKUMAR, M.E., (P.hD) Associate Professor UNIT I THEORY OF

More information

Typical Parts Made with These Processes

Typical Parts Made with These Processes Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts

More information

PRODUCTION ENGINEERING LAB II

PRODUCTION ENGINEERING LAB II Department of Mechanical Engineering LAB MANUAL FOR PRODUCTION ENGINEERING LAB II DEPT. OF MECHANICAL ENGINEERING 1. SHAPER 1.1 INTRODUCTION The shaper is a reciprocating type of machine tool intended

More information

Machine Tool Technology/Machinist CIP Task Grid

Machine Tool Technology/Machinist CIP Task Grid 1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 102 Identify & explain safety equipment and procedures. 103 Identify

More information

Machinist NOA (2010) Subtask to Unit Comparison

Machinist NOA (2010) Subtask to Unit Comparison Machinist NOA (2010) Subtask to Unit Comparison NOA Subtask Task 1 Organizes work. 1.01 Interprets documentation. A16 Job Planning 1.02 Plans sequence of operations. A16 Job Planning 1.03 Maintains safe

More information

Abrasive Machining and Finishing Operations

Abrasive Machining and Finishing Operations Abrasive Machining and Finishing Operations Bonded Abrasives Used in Abrasive-Machining Processes Figure 25.1 A variety of bonded abrasives used in abrasivemachining processes. Source: Courtesy of Norton

More information

Updated January 2019 METAL CUTTING EQUIPMENT BORING & DRILLING MACHINES GRINDING MACHINES HORIZONTAL LATHES. Page 1 of 7 MACHINE DESCRIPTION 3541.

Updated January 2019 METAL CUTTING EQUIPMENT BORING & DRILLING MACHINES GRINDING MACHINES HORIZONTAL LATHES. Page 1 of 7 MACHINE DESCRIPTION 3541. METAL CUTTING EQUIPMENT BORING & DRILLING MACHINES JIG BORING 3541.205 BORING, HBM QUILL FEED SPINDLES CNC OR MANUAL 3541.207 DRILLING, NON-NC 3541.215 SENSITIVE VERTICAL DRILLING MACHINES, MANUAL 3541.216

More information

Chapter 24 Machining Processes Used to Produce Various Shapes.

Chapter 24 Machining Processes Used to Produce Various Shapes. Chapter 24 Machining Processes Used to Produce Various Shapes. 24.1 Introduction In addition to parts with various external or internal round profiles, machining operations can produce many other parts

More information

Machine Tool Technology/Machinist CIP Task Grid

Machine Tool Technology/Machinist CIP Task Grid 1 Secondary Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machoning industry. 102 Identify & explain safety equipment and

More information

Revised April Unit/Standard Number. High School Graduation Years 2016, 2017 and 2018

Revised April Unit/Standard Number. High School Graduation Years 2016, 2017 and 2018 Unit/Standard Number High School Graduation Years 2016, 2017 and 2018 Machine Tool Technology/Machinist CIP 48.0501 Task Grid Secondary Competency Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational

More information

MACHINE TOOLS GRINDING MACHINE TOOLS

MACHINE TOOLS GRINDING MACHINE TOOLS MACHINE TOOLS GRINDING MACHINE TOOLS GRINDING MACHINE TOOLS Grinding in generally considered a finishing operation. It removes metal comparatively in smaller volume. The material is removed in the form

More information

COMPETENCY ANALYSIS PROFILE Tool and Die Maker 430A (All unshaded skill sets must be demonstrated/completed)

COMPETENCY ANALYSIS PROFILE Tool and Die Maker 430A (All unshaded skill sets must be demonstrated/completed) COMPETENCY ANALYSIS PROFILE Tool and Die Maker 430A (All unshaded skill sets must be demonstrated/completed) SKILL SETS SKILLS PROTECT SELF AND OTHERS Identify health and safety hazards. Wear, adjust,

More information

Module 4 General Purpose Machine Tools. Version 2 ME, IIT Kharagpur

Module 4 General Purpose Machine Tools. Version 2 ME, IIT Kharagpur Module 4 General Purpose Machine Tools Lesson 22 Use of various Attachments in Machine Tools. Instructional objectives At the end of this lesson, the students will be able to; (i) Comprehend and state

More information

Machine Tool Technology/Machinist CIP Task Grid Secondary Competency Task List

Machine Tool Technology/Machinist CIP Task Grid Secondary Competency Task List 1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 2 2 2 1 0.5 102 Identify & explain safety equipment and procedures.

More information

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable

More information

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified) WINTER 15 EXAMINATION

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified) WINTER 15 EXAMINATION Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2) The model answer and the answer written by candidate

More information

Directorate of Skill Development Madhya Pradesh. Detail of Machine Packages. Schedule of Machines Requirement (CoE-WB-VTIP)

Directorate of Skill Development Madhya Pradesh. Detail of Machine Packages. Schedule of Machines Requirement (CoE-WB-VTIP) Directorate of Skill Development Madhya Pradesh Detail of Packages Schedule of s Requirement (CoE-WB-VTIP) Package No-1 S.S. & S.C. Lathe 15 cm S.No. Particulars Qty. Rate Amount Mode of Name of ITI 1

More information

أت ارش. Dr. Abdel-Wahab El-Morsy Faculty of Engineering - Rabigh

أت ارش. Dr. Abdel-Wahab El-Morsy Faculty of Engineering - Rabigh Basic Workshop 1 أت ارش Machining Process Machining is a term used to describe a variety of material removal processes in which a cutting tool removes unwanted material from a workpiece to produce the

More information

GEARS MACHINING. GEAR TYPES Cylindrical gears: - spur - helical Bevel gears: - straight - curved (spiral) Worm wheels and worms

GEARS MACHINING. GEAR TYPES Cylindrical gears: - spur - helical Bevel gears: - straight - curved (spiral) Worm wheels and worms GEARS MACHINING GEAR TYPES Cylindrical gears: - spur - helical Bevel gears: - straight - curved (spiral) Worm wheels and worms 1 Involute tooth profile 2 Spur and helical gears cutting METHODS: form milling

More information

DEPARTMENT OF MECHANICAL ENGINEERING ME 6411 MANUFACTURING TECHNOLOGY LAB-II (IV SEMESTER MECHANICAL) Regulation 2013 LAB MANUAL 2015-16 OBSERVATION NOTE BOOK ME6411 MANUFACTURING TECHNOLOGY LABORATORY

More information

STATE COUNCIL OF EDUCATIONAL RESEARCH AND TRAINING TNCF DRAFT SYLLABUS

STATE COUNCIL OF EDUCATIONAL RESEARCH AND TRAINING TNCF DRAFT SYLLABUS STATE COUNCIL OF EDUCATIONAL RESEARCH AND TRAINING TNCF 2017 - DRAFT SYLLABUS Subject :GENERAL MACHINIST - Theory Class : XI TOPIC CONTENT 1. Workshop Engineering Introduction; Machinist; Duties; Role

More information

Name: Machine Tool Technology ( )

Name: Machine Tool Technology ( ) Name: Machine Tool Technology (58.0501) Directions: Evaluate the student by checking the appropriate number to indicate the degree of competency. Rating Scale (0-6): 0 No Exposure no experience/knowledge

More information

NEAT CUTTING & GRINDING OILS

NEAT CUTTING & GRINDING OILS METALWORKING NEAT CUTTING & GRINDING OILS YOUR ADVANTAGE IN AN INDUSTRIAL WORLD A CHOICE TO SUIT YOUR NEEDS Castrol has a high performance and versatile range of neat oils designed to meet your metalworking

More information

College of Forestry 610: Power Tools

College of Forestry 610: Power Tools College of Forestry 610: Power Tools Safety Policy & Procedure Manual Section 600: Workshops and Shop Tools Effective: 01 January 2007 Revised: August 2014 PURPOSE The purpose of this section is to provide

More information

(VERSA-M IL) GENERAL

(VERSA-M IL) GENERAL Chapter 9 MILLING-GRINDING-DRILLING AND SLOTTING ATTACHMENT DESCRIPTION The milling-grinding-drilling and slotting attachment is commonly referred to as a Versa-Mil. It is a compact, portable unit capable

More information

Tool and Die Maker Level 2

Tool and Die Maker Level 2 Level 2 B2 Read and Interpret Drawings II Duration: 32 hours 32 hours 0 hours This unit of instruction introduces the Tool and Die Maker Apprentice with the knowledge and skills necessary to read and interpret

More information

8.10 Drill Grinding Device

8.10 Drill Grinding Device 8.10 Drill Grinding Device Special Accessories 1. Introduction Device can accurately grind precision drill and tools, this drill grinding machine system consists of a motor and grinding wheel head composed

More information

We are one of the prominent organization deals in Industrial Compressors, Hydraulic Hacksaw

We are one of the prominent organization deals in Industrial Compressors, Hydraulic Hacksaw +91-8048079269 Bharat ry & Spares http://www.engineeringgoods.co.in/ We are one of the prominent organization deals in Industrial Compressors, Hydraulic Hacksaw, ARC Welding, Lathe s, Milling s, Tapping,

More information

Copyright 2009 Society of Manufacturing Engineers. FUNDAMENTALS OF TOOL DESIGN Fixture Design - DF

Copyright 2009 Society of Manufacturing Engineers. FUNDAMENTALS OF TOOL DESIGN Fixture Design - DF FUNDAMENTALS OF TOOL DESIGN Fixture Design - DF SCENE 1. DF26A, FTD87, 03:20:15:00-03:20:46:00 zoom out, milling operation DF26B, CGS: Milling Fixtures Lathe Fixtures Grinding Fixtures Broaching Fixtures

More information

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student

More information

Interim Logbook TOOL & DIE MAKER

Interim Logbook TOOL & DIE MAKER Interim Logbook TOOL & DIE MAKER Department of Advanced Education and Skills Apprenticeship and Trades Certification Division Note to Apprenticeship Applicants This form can only be used to record hours

More information

Perfect Machines Center

Perfect Machines Center +91-8048603597 Perfect s Center https://www.perfectmachinescentre.in/ We have emerged as an eminent manufacturer and distributor of workshop machinery like heavy duty lathe machines, universal milling

More information

Tool Shop. TCM Servicecenter Bochum GmbH TOOL CONSULTING & MANAGEMENT. Copyright Servicecenter Bochum 07/08/2006 Page 1 of 10

Tool Shop. TCM Servicecenter Bochum GmbH TOOL CONSULTING & MANAGEMENT. Copyright Servicecenter Bochum 07/08/2006 Page 1 of 10 Tool Shop TCM Servicecenter Bochum GmbH Servicecenter Bochum 07/08/2006 Page 1 of 10 We See Ourselves as Partners Good partnership to us means to manufacture highquality machine- and equipment components

More information

Drilling. Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL.

Drilling. Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL. Drilling Machine Drilling Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL. The machine used for drilling is called drilling machine. The drilling

More information

SAMPLE. MEM07005C Perform general machining. Learner guide. MEM05 Metal and Engineering Training Package. Version 1

SAMPLE. MEM07005C Perform general machining. Learner guide. MEM05 Metal and Engineering Training Package. Version 1 MEM05 Metal and Engineering Training Package MEM07005C Perform general machining Learner guide Version 1 Training and Education Support Industry Skills Unit Meadowbank Product code: 5449 Acknowledgments

More information

CSIR Integrated Skill Initiative. Advanced Machining & Welding CSIR-IMMT

CSIR Integrated Skill Initiative. Advanced Machining & Welding CSIR-IMMT CSIR Integrated Skill Initiative Advanced Machining & Welding CSIR-IMMT CSIR-IMMT is one of the leading technology organizations in mineral processing and materials technology. Its Central Mechanical Workshop

More information

NATIONAL CERTIFICATE (VOCATIONAL) FITTING AND TURNING NQF LEVEL 2 SUPPLEMENTARY EXAMINATION 2010

NATIONAL CERTIFICATE (VOCATIONAL) FITTING AND TURNING NQF LEVEL 2 SUPPLEMENTARY EXAMINATION 2010 NTIONL ERTIFITE (VOTIONL) FITTING ND TURNING NQF LEVEL 2 SUPPLEMENTRY EXMINTION 2010 (6011042) 4 March (X-Paper) 09:00 12:00 This question paper consists of 7 pages and a 1-page formula sheet. opyright

More information

TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER

TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The

More information

Other Machining Operations

Other Machining Operations Other Machining Operations Chapter 25 25.1 Introduction This chapter covers: Shaping Planing Broaching Sawing Filing 25.2 Introduction to Shaping and Planing Shaping and Planing among the oldest techniques

More information

Chapter 28: Abrasive Machining Processes. DeGarmo s Materials and Processes in Manufacturing

Chapter 28: Abrasive Machining Processes. DeGarmo s Materials and Processes in Manufacturing Chapter 28: Abrasive Machining Processes DeGarmo s Materials and Processes in Manufacturing 28.1 Introduction Abrasive machining is the process of using abrasive grit to remove material at high cutting

More information

B.E Mini Projects

B.E Mini Projects B.E Mini Projects 2017-2018 S.NO CMP001 CMP002 CMP003 CMP004 CMP005 CMP006 CMP007 CMP008 CMP009 CMP010 CMP011 CMP012 CMP013 CMP014 CMP015 CMP016 CMP017 CMP018 CMP019 CMP020 CMP021 CMP022 CMP023 CMP024

More information

Turning and Lathe Basics

Turning and Lathe Basics Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques

More information

Classification of Metal Removal Processes and Machine tools. Introduction to Manufacturing and Machining

Classification of Metal Removal Processes and Machine tools. Introduction to Manufacturing and Machining Classification of Metal Removal Processes and Machine tools Introduction to Manufacturing and Machining Production Engineering covers two domains: (a) Production or Manufacturing Processes (b) Production

More information

INTRODUCTION. Dear Business Partners,

INTRODUCTION. Dear Business Partners, INTRODUCTION Dear Business Partners, We are proud to issue the new catalogue of STROJFERR s.r.o. which was established in 1997 as a genuinely Czech company. In its activities and production programme,

More information

Cylindrical Gear Solutions

Cylindrical Gear Solutions Cylindrical Gear Solutions Hobbing/Shaving Vertical Gear Hobbing Machines Genesis 130H 130 3 350 Genesis 210H 210 3/4 350 Genesis 260H 260 4/8 400/600 Genesis 400H 400 8/4 400/600 P 400 400 16 400/600

More information

March weeks. surcharge for

March weeks. surcharge for March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not

More information

Module 1. Classification of Metal Removal Processes and Machine tools. Version 2 ME IIT, Kharagpur

Module 1. Classification of Metal Removal Processes and Machine tools. Version 2 ME IIT, Kharagpur Module 1 Classification of Metal Removal Processes and Machine tools Lesson 2 Basic working principle, configuration, specification and classification of machine tools Instructional Objectives At the end

More information

HOW TO USE MILLING MACHINE?

HOW TO USE MILLING MACHINE? HOW TO USE MILLING MACHINE? Milling is the process of machining flat, curved, or irregular surfaces by feeding the workpiece against a rotating cutter containing a number of cutting edges. The usual Mill

More information

bcprecision Devices, Inc. HYDRAULIC ARBORS AND CHUCKS

bcprecision Devices, Inc.  HYDRAULIC ARBORS AND CHUCKS UNEQUALED WORK HOLDING ACCURACY for: grinding; balancing; inspection; boring; facing; reaming; drilling; turning; shaving; hobbing and honing b SQUARENESS r CONCENTRICITY f PARALLELISM e ROUNDNESS v ALIGNMENT

More information

MANUFACTURING TECHNOLOGY

MANUFACTURING TECHNOLOGY MANUFACTURING TECHNOLOGY UNIT IV SURFACE FINISHING PROCESS Grinding Grinding is the most common form of abrasive machining. It is a material cutting process which engages an abrasive tool whose cutting

More information

Chapter 26 Abrasive Machining Processes. Materials Processing ABRASIVE MACHINING 10/11/2014. MET Manufacturing Processes

Chapter 26 Abrasive Machining Processes. Materials Processing ABRASIVE MACHINING 10/11/2014. MET Manufacturing Processes MET 33800 Manufacturing Processes Chapter 26 Abrasive Machining Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing Chapters

More information

Introduction to Manufacturing Processes

Introduction to Manufacturing Processes Introduction to Manufacturing Processes Products and Manufacturing Product Creation Cycle Design Material Selection Process Selection Manufacture Inspection Feedback Typical product cost breakdown Manufacturing

More information

Machinist A Guide to Course Content

Machinist A Guide to Course Content Machinist A Guide to Course Content Machinists work with metals; operate metal-cutting and shaping machinery. Training Requirements: To graduate from each level of the apprenticeship program, an apprentice

More information

TURNING BORING TURNING:

TURNING BORING TURNING: TURNING BORING TURNING: FACING: Machining external cylindrical and conical surfaces. Work spins and the single cutting tool does the cutting. Done in Lathe. Single point tool, longitudinal feed. Single

More information

Chapter 22 MACHINING OPERATIONS AND MACHINE TOOLS

Chapter 22 MACHINING OPERATIONS AND MACHINE TOOLS Chapter 22 MACHINING OPERATIONS AND MACHINE TOOLS Turning and Related Operations Drilling and Related Operations Milling Machining Centers and Turning Centers Other Machining Operations High Speed Machining

More information

STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK

STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 121 - MANUFACTURING PROCESSES I Prepared By: Daniel Miller Updated By: Daniel Miller (April 2015) CANINO SCHOOL OF

More information

CHAPTER 23 Machining Processes Used to Produce Various Shapes Kalpakjian Schmid Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1

CHAPTER 23 Machining Processes Used to Produce Various Shapes Kalpakjian Schmid Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1 CHAPTER 23 Machining Processes Used to Produce Various Shapes Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1 Examples of Parts Produced Using the Machining Processes in the Chapter

More information

MACHINE TOOLS LAB MANUAL. B. Tech III Year - I Semester DEPARTMENT OF MECHANICAL ENGINEERING. Aurora s Technological And Research Institute

MACHINE TOOLS LAB MANUAL. B. Tech III Year - I Semester DEPARTMENT OF MECHANICAL ENGINEERING. Aurora s Technological And Research Institute MACHINE TOOLS LAB MANUAL B. Tech III Year - I Semester NAME : ROLL NO : BRANCH : DEPARTMENT OF MECHANICAL ENGINEERING Aurora s Technological And Research Institute Parvathapur, Uppal, Hyderabad-98. 1 MACHINE

More information