Detailed RRB ALP Stage II Syllabus (Part A) 2018
|
|
- Darcy Garrison
- 5 years ago
- Views:
Transcription
1 Detailed RRB ALP Stage II Syllabus (Part A) 2018 Railways RRB ALP Computer Based Test for Stage II will soon be conducted. If you are preparing for the upcoming ALP CBT-II, then it is necessary that you are familiar with the RRB ALP Stage II Syllabus for Part A. The Answer Keys for Railways CBT-I has been released recently. In this article, know the details about the RRB ALP Syllabus for Mathematics, General Intelligence and Reasoning, Basic Science and Engineering & General Awareness on Current Affairs. You can also download the RRB ALP Syllabus for Stage 2 Part B in PDF as well! RRB ALP Stage II Syllabus 2018 Ability to read Engineering Drawing is essential to perform a job/task of Engineering Trades. It is the skills set which enable comprehending the given job and subsequent planning to complete the task/job. Thus, it is regarded as core skills for all Engineering trades. Knowledge of basic scientific principles creates the foundation for acquiring hard skills. It is the initial/inherent knowledge set which enables analysing the given job and subsequent detail planning; Such as selecting proper physical conditions e.g. Temperature for a heat treatment process, Material of cutting tool etc. Similarly, the ability to perform simple calculations also creates the foundation for proper hard skills. It is the inherent knowledge set which enables to analyse the given job - quantitatively and subsequent detail planning; Such as selecting the physical conditions quantitatively e.g. speed and feed of a cutting operation Thus, Basic Science and Engineering 1 P a g e
2 (Engineering Drawing, Workshop Calculation & Science) is regarded as a core skill set which supplements hard skills in all Engineering Trades. As you know that PART A will decide the merit list, so it is very important for you to get maximum marks in part A. Detailed RRB ALP Stage II Syllabus (Part A) 2018 Mathematics General Intelligence and Reasoning Basic Science and Engineering General Awareness on Current Affairs Sections Mathematics Topics Number System BODMAS Decimals Fractions LCM, HCF Ratio and Proportion Percentages Mensuration Time and Work Time and Distance Simple and Compound Interest Profit and Loss Algebra Geometry Trigonometry Elementary Statistics Square Root 2 P a g e
3 Age Calculations Calendar & Clock Pipes & Cistern etc General Intelligence and Reasoning Analogies Alphabetical and Number Series Coding and Decoding Mathematical operations Relationships Syllogism Jumbling Venn Diagram Data Interpretation and Sufficiency Conclusions and Decision Making Similarities and differences Analytical Reasoning Classification Directions Statement - Arguments and Assumptions etc General Awareness on Current Affairs Science & Technology Sports Culture Personalities Economics Politics Other Important topics Basic Science and Engineering Engineering Drawing (Projections, Views, Drawing Instruments, Lines, 3 P a g e
4 Geometric figures, Symbolic Representation) (5-6 Q) Units, Measurements (3-4 Q) Mass Weight and Density (2-3 Q) Work Power and Energy (2-3 Q) Speed and Velocity (1-2 Q) Heat and Temperature (2-3 Q) Basic Electricity (2-3 Q) Levers and Simple Machines (2-3 Q) Occupational Safety & Health (2-3 Q) Environment Education (1-2 Q) IT Literacy (2-3 Q) Everyone is well aware with the syllabus of Mathematics, General Intelligence and Reasoning and General Awareness on Current Affairs because you have prepared same type of syllabus for your STAGE I also. So, there is no big problem while preparing for this part of Stage II. So BASIC SCIENCE AND ENGINEERING will play a key role here. This is new for everyone. Its preparation will help you in getting a good merit. Let s discuss its syllabus in more details and know the topics we have to prepare for the exam. RRB ALP Stage II Syllabus Engineering Drawing: Drawing Instrument Drawing Sheet: Length, Breadth, Size (A0, A1, A2, A3, A4, A5), Designation Drawing Board: Shape, Size, Material, Designation, Use T-Square: Shape, Size, Material, Parts, Designation, Use Mini Drafter: Parts, Working, Use Drafting Technique Set Square Protractor 4 P a g e
5 Drawing Instrument Box RRB ALP Stage 2 Syllabus - Engineering Drawing: Lines Different types of lines (Horizontal, Vertical, Inclined, Parallel, Perpendicular, Curved) Representation and descriptions Applications Geometric Construction: Bisecting a line, to draw perpendicular and parallel lines, bisect an angle, find centre, draw tangents, Divide a line in equal parts Railways ALP Stage II Syllabus - Engineering Drawing: Geometric figures Different types of lines (Continuous Line, Dashed line, Dotted line.) Polygon: Definition, Types, Properties, Method of construction Ellipse: Definition, Elements of ellipse, Method of construction Different types of geometric figures and blocks: Cylinders, Cones etc Drawing angles: Measurement and its type (Acute, Right, Obtuse, Reflex, Adjacent, Complementary, Supplementary), Methods of bisecting Drawing Triangle: Different types (Equilateral, Isosceles, Scalene) Types of Quadrilateral: Square, Rectangle, Rhombus, Trapezoid Circles: Definition, Parts (Radius, Diameter, Sector, Segment) RRB ALP Stage II Syllabus Engineering Drawing: Projection and Views Pictorial View: Types Isometric drawing Oblique drawing Perspective drawing 5 P a g e
6 RRB ALP Stage 2 Syllabus Engineering Drawing: Symbolic Representation Fasteners: Rivets, Bolts and Nuts Representation of bars and profile sections Electrical and electronic elements: Resistor, Inductor, Capacitor Pipe Joints: Methods (Screwed pipe joint, Welded pipe joint, Flanged pipe joint etc.) RRB ALP Stage II Syllabus - Units and Measurement Definition Classifications: Fundamental and Derived units Systems of units: FPS, CGS, MKS Units of physical quantities, symbols Conversion factors Measurement of mechanical quantities, electrical quantities RRB ALP Stage II 2018 Syllabus - Mass Weight and Density Definition Comparison between mass and weight Comparison between density and relative density/specific gravity Volume of different geometries (Cube, Cylinder, Cone, Sphere etc.) Railways ALP Stage II Syllabus Work Power and Energy Definition Work and its Units, Measurement of work Work done on bodies moving on horizontal and inclined planes (consider frictional forces also) 6 P a g e
7 Concept of Power and its units, Calculations of power (simple cases) Concept of Kinetic energy and potential energy, Expressions for P.E and K.E Principle of conservation of energy RRB ALP Part A Stage 2 Syllabus - Speed and Velocity Definition of speed, velocity and their comparison Scalar and Vector quantity Average Velocity, Acceleration & Retardation Equations of motion Circular Motion: Relation between circular motion and Linear motion RRB ALP Stage 2 Syllabus Heat and Temperature Definition Specific Heat and Thermal Capacity Types of heat: Sensible Heat, Latent Heat Difference between heat and temperature Different temperature scales and conversions Temperature measuring instruments RRB ALP Stage 2 Syllabus - Basic Electricity Source of electricity: Battery, Generator, Thermocouple Types of electric current: Direct current, Alternate current Difference between AC and DC Electrical Terms and units Ohm s Law, Kirchhoff s law 7 P a g e
8 Relationships between Current, Volt, Resistance and Power Resistance connections, Simple Problems on series and parallel circuits Insulators: Properties and Classification Conductors: Properties and Classification Electric Power, Horse Power, Work and energy RRB ALP Stage 2 Part A Syllabus - Levers and Simple Machines Definitions Velocity ratio, Mechanical Advantages, Efficiency and relationships Ideal Machines Lever: Principle, Types (First order lever, Second order lever, Third order lever) Relationship, law of machine, simple machines (lever, wheel and axle, pulleys, jacks & winch crabs) Related problems RRB ALP Stage II Syllabus Occupational Safety, Health Safety & Health: Introduction and Importance of Occupational Safety and Health Occupational Hazards: Basic Hazards, Chemical Hazards, Vibroacoustic Hazards, Mechanical Hazards, Electrical Hazards, Thermal Hazards. Occupational health, Occupational hygienic, Occupational Diseases/ Disorders & its prevention Accident & safety: Basic principles for protective equipment, Accident Prevention techniques control of accidents and safety measures First Aid: Care of injured & Sick at the workplaces, First-Aid & Transportation of sick person Basic Provisions: Idea of basic provision of safety, health, welfare under legislation of India 8 P a g e
9 RRB ALP Stage II Syllabus - Environment Education Ecosystem: Introduction to Environment, Relationship between Society and Environment, Ecosystem and Factors causing imbalance Pollution: Pollution and pollutants including liquid, gaseous, solid and hazardous waste Energy Conservation: Conservation of Energy, re-use and recycle Global warming: Global warming, climate change and Ozone layer depletion Ground Water: Hydrological cycle, ground and surface water, Conservation and Harvesting of water Environment: Right attitude towards environment, Maintenance of in-house environment RRB ALP Stage II Syllabus - I.T. Literacy Computer: Introduction, Computer and its applications, Hardware and peripherals, switching on and shutting down of computer WINDOWS: Basics of Operating System, WINDOWS, Create, Copy, Move and delete Files and Folders, Use of External memory like pen drive, CD, DVD etc. MS office: Basic operations of Word Processing (Cut /Copy /Paste/ Formatting), Basics of Excel worksheet (Commands/simple formulas and functions) INTERNET: Computer Networks (LAN/WAN), Applications of Internet (Browsing, Searching, ing, Social Networking) WEB Browser: World Wide Web (WWW), Web Browsing, Information Security and antivirus tools, Awareness of IT ACT, Importance of information security and IT act, types of cyber crimes Read more on RRB ALP Stage 2 Technical Paper (Part B) by clicking on the link given below! 9 P a g e
10 Insulators Study Notes - ALP Technical Transistors Notes - ALP Technical Paper Linear Measurement & Tools - ALP Technical Paper Resistors Study Notes - ALP Technical 10 P a g e
NATIONAL INSTITUTE OF TECHNOLOGY ANDHRA PRADESH RECRUITEMENT FOR NON-TEACHING POSITIONS (SYLLABUS FOR WRITTEN EXAMINATION)
NATIONAL INSTITUTE OF TECHNOLOGY ANDHRA PRADESH RECRUITEMENT FOR NON-TEACHING POSITIONS (SYLLABUS FOR WRITTEN EXAMINATION) S.NO NAME OF THE POST SYLLABUS 1. 1. Attendant 2. Security Guard 3. Mali 1.Aptitude-
More informationSYLLABUS FOR THE TRADE OF MACHINSIT First Semester (Semester Code no. MCN - 01) Duration : Six Month
Week Trade Practical No. 1. Importance of trade training, List of tools & Machinery used in the trade. Health & Safety: Introduction to safety equipments and their uses. Introduction of first aid, operation
More informationCCE Calendar for Session Delhi Region (Split-up Syllabus) Class VI- Mathematics TERM I
CCE Calendar for Session 2016-2017 Delhi Region (Split-up Syllabus) Class VI- Mathematics TERM I MONTHS CHAPTER/TOPIC SUB TOPICS TO BE COVERED NUMB ER OF PERIO DS SUGGESTED ACTIVITIES CH 1. Knowing Our
More informationSyllabus for the subject
Syllabus for the subject of WORKSHOP CALCULATION & SCIENCE Under CRAFT INSTRUCTOR TRAINING SCHEME (CITS) (For all Engineering Trades under Group II) Re-Designed in 2014 - By Government of India Ministry
More information1 st Subject: 2D Geometric Shape Construction and Division
Joint Beginning and Intermediate Engineering Graphics 2 nd Week 1st Meeting Lecture Notes Instructor: Edward N. Locke Topic: Geometric Construction 1 st Subject: 2D Geometric Shape Construction and Division
More informationAGS Math Algebra 2 Correlated to Kentucky Academic Expectations for Mathematics Grades 6 High School
AGS Math Algebra 2 Correlated to Kentucky Academic Expectations for Mathematics Grades 6 High School Copyright 2008 Pearson Education, Inc. or its affiliate(s). All rights reserved AGS Math Algebra 2 Grade
More informationPENNSYLVANIA. List properties, classify, draw, and identify geometric figures in two dimensions.
Know: Understand: Do: CC.2.3.4.A.1 -- Draw lines and angles and identify these in two-dimensional figures. CC.2.3.4.A.2 -- Classify twodimensional figures by properties of their lines and angles. CC.2.3.4.A.3
More informationDownloaded from
Understanding Elementary Shapes 1 1.In the given figure, lines l and m are.. to each other. (A) perpendicular (B) parallel (C) intersect (D) None of them. 2.a) If a clock hand starts from 12 and stops
More informationLESSON PLAN. TOPIC DAY Unit 1 Introduction Concept of engineering mechanics definition of mechanics, statics, dynamics,
Week LESSON PLAN Name of Faculty: Visiting Faculty-1 (THEORY+PRACTICAL) Discipline: Plastic Technology Semester: 2 nd Subject: APPLIED MECHANICS Lesson plan Duration: 15 WEEKS Work Load (Lecture/Practical)
More informationCourse: Math Grade: 7. Unit Plan: Geometry. Length of Unit:
Course: Math Grade: 7 Unit Plan: Geometry Length of Unit: Enduring Understanding(s): Geometry is found in the visual world in two and three dimension. We use geometry daily in problem solving. Essential
More informationDefence Research and Development Organisation
Defence Research and Development Organisation DRDO STA B Numerical Ability Syllabus Time and Distance HCF & LCM Time and Work Ratio and Proportions Simple & Compound Interest Mixtures & Allegations Percentages
More informationSYLLABUS FOR THE TRADE OF TURNER
SYLLABUS FOR THE TRADE OF TURNER First Semester (Semester Code no. TUR - 01) Duration : Six Month Week Trade Practical No. 1. Importance of trade training, List of tools & Machinery used in the trade.
More informationGeometry For Technical Drawing Chapter 4
Geometry For Technical Drawing Chapter 4 Sacramento City College EDT 300/ENGR 306 EDT 300/ENGR 306 1 Objectives Identify and describe geometric shapes and constructions used by drafters. Construct various
More informationStudent Name: Teacher: Date: District: Rowan. Assessment: 9_12 T and I IC61 - Drafting I Test 1. Form: 501
Student Name: Teacher: Date: District: Rowan Assessment: 9_12 T and I IC61 - Drafting I Test 1 Description: Test 4 A (Diagrams) Form: 501 Please use the following figure for this question. 1. In the GEOMETRIC
More informationDirectorate of Education
Directorate of Education Govt. of NCT of Delhi Worksheets for the Session 2012-2013 Subject : Mathematics Class : VI Under the guidance of : Dr. Sunita S. Kaushik Addl. DE (School / Exam) Coordination
More informationAngle Measure and Plane Figures
Grade 4 Module 4 Angle Measure and Plane Figures OVERVIEW This module introduces points, lines, line segments, rays, and angles, as well as the relationships between them. Students construct, recognize,
More informationCOURSE SYLLABUS. Course Title: Introduction to Quality and Continuous Improvement
COURSE SYLLABUS Course Number: TBD Course Title: Introduction to Quality and Continuous Improvement Course Pre-requisites: None Course Credit Hours: 3 credit hours Structure of Course: 45/0/0/0 Textbook:
More informationWORKSHOP CALCULATION
Syllabus for the subject of WORKSHOP CALCULATION FOR ENGINEERING TRADE GROUP III TRADES COVERED IN THE GROUP: DRAUGHTSMAN (MECHANICAL)/ DRAUGHTSMAN (CIVIL)/READING OF DRAWING & ARITHMETIC/SURVEYOR / DRAUGHTSMAN
More informationLIST OF HANDS-ON ACTIVITIES IN MATHEMATICS FOR CLASSES III TO VIII. Mathematics Laboratory
LIST OF HANDS-ON ACTIVITIES IN MATHEMATICS FOR CLASSES III TO VIII Mathematics Laboratory The concept of Mathematics Laboratory has been introduced by the Board in its affiliated schools with the objective
More informationIED Detailed Outline. Unit 1 Design Process Time Days: 16 days. An engineering design process involves a characteristic set of practices and steps.
IED Detailed Outline Unit 1 Design Process Time Days: 16 days Understandings An engineering design process involves a characteristic set of practices and steps. Research derived from a variety of sources
More informationElko County School District 5 th Grade Math Learning Targets
Elko County School District 5 th Grade Math Learning Targets Nevada Content Standard 1.0 Students will accurately calculate and use estimation techniques, number relationships, operation rules, and algorithms;
More informationDRAFT. Geometry EOC Item Specifications
DRAFT Geometry EOC Item Specifications The draft (FSA) Test Item Specifications (Specifications) are based upon the Florida Standards and the Florida Course Descriptions as provided in CPALMs. The Specifications
More informationCTB/McGraw-Hill. Math Quarter 2: Week 5: Mixed Review Test ID:
Page 1 of 35 Developed and published by CTB/McGraw-Hill LLC, a subsidiary of The McGraw-Hill Companies, Inc., 20 Ryan Ranch Road, Monterey, California 93940-5703. All rights reserved. Only authorized customers
More informationENGINEERING GRAPHICS (XI-XII) (Code No. 046)
ENGINEERING GRAPHICS (XI-XII) (Code No. 046) The subject of 'Engineering Graphics' has become an indispensable tool for Engineers, Technocrats, Architects, Draftsmen, Surveyors, Designers and many other
More informationNUMBERS & OPERATIONS. 1. Understand numbers, ways of representing numbers, relationships among numbers and number systems.
7 th GRADE GLE S NUMBERS & OPERATIONS 1. Understand numbers, ways of representing numbers, relationships among numbers and number systems. A) Read, write and compare numbers (MA 5 1.10) DOK 1 * compare
More informationStatue of Liberty Eiffel Tower Gothic Cathedral (p1) Gothic Cathedral (p2) Gothic Cathedral (p3) Medieval Manor (p1)
ARCHITECTURE Statue of Liberty Eiffel Tower Gothic Cathedral (p1) Gothic Cathedral (p2) Gothic Cathedral (p3) Medieval Manor (p1) Medieval Manor (p1) Toltec sculpture Aqueduct Great Pyramid of Khufu (p1)
More informationENGINEERING GRAPHICS (Code No. 046)
ENGINEERING GRAPHICS (Code No. 046) CLASS XI-XII The subject of 'Engineering Graphics' has become an indispensable tool for Engineers, Technocrats, Architects, Draftsmen, Surveyors, Designers and many
More informationMultiple Category Scope and Sequence: Scope and Sequence Report For Course Standards and Objectives, Content, Skills, Vocabulary
Multiple Category Scope and Sequence: Scope and Sequence Report For Course Standards and Objectives, Content, Skills, Vocabulary Wednesday, August 20, 2014, 3:14PM District Intermediate Introduction to
More informationBig Ideas Math: A Common Core Curriculum Geometry 2015 Correlated to Common Core State Standards for High School Geometry
Common Core State s for High School Geometry Conceptual Category: Geometry Domain: The Number System G.CO.1 Know precise definitions of angle, circle, perpendicular line, parallel line, and line segment,
More informationGRADE LEVEL: FOURTH GRADE SUBJECT: MATH DATE: Read (in standard form) whole numbers. whole numbers Equivalent Whole Numbers
CRAWFORDSVILLE COMMUNITY SCHOOL CORPORATION 1 GRADE LEVEL: FOURTH GRADE SUBJECT: MATH DATE: 2019 2020 GRADING PERIOD: QUARTER 1 MASTER COPY 1 20 19 NUMBER SENSE Whole Numbers 4.NS.1: Read and write whole
More information1. Use the following directions to draw a figure in the box to the right. a. Draw two points: and. b. Use a straightedge to draw.
NYS COMMON CORE MATHEMATICS CURRICULUM Lesson 1 Problem Set 4 Name Date 1. Use the following directions to draw a figure in the box to the right. a. Draw two points: and. b. Use a straightedge to draw.
More informationGeometry by Jurgensen, Brown and Jurgensen Postulates and Theorems from Chapter 1
Postulates and Theorems from Chapter 1 Postulate 1: The Ruler Postulate 1. The points on a line can be paired with the real numbers in such a way that any two points can have coordinates 0 and 1. 2. Once
More informationStandard 4.G.1 4.G.2 5.G.3 5.G.4 4.MD.5
Draw and identify lines and angles, as well as classify shapes by properties of their lines and angles (Standards 4.G.1 3). Standard 4.G.1 Draw points, lines, line segments, rays, angles (right, acute,
More informationGeometry. Teacher s Guide
Geometry Teacher s Guide WALCH PUBLISHING Table of Contents To the Teacher.......................................................... vi Classroom Management..................................................
More information*Unit 1 Constructions and Transformations
*Unit 1 Constructions and Transformations Content Area: Mathematics Course(s): Geometry CP, Geometry Honors Time Period: September Length: 10 blocks Status: Published Transfer Skills Previous coursework:
More informationEstimating Tolerance Accuracy (Rounding, including sig. fig.) Scientific notation
S3 Pathways for learning in Maths Pathway 1 (Lower) Pathway 2 (Middle) Pathway 3 (Upper) Targets Complete coverage of level 3 experiences and outcomes in Mathematics Cover level 4 experiences and outcomes
More informationGrade 7 Mathematics Item Specifications Florida Standards Assessments
Assessment Limit MAFS7.G.1 Draw, construct, and describe geometrical figures and describe the relationships between them. MAFS.7.G.1.1 Solve problems involving scale drawings of geometric figures, including
More informationJune 2016 Regents GEOMETRY COMMON CORE
1 A student has a rectangular postcard that he folds in half lengthwise. Next, he rotates it continuously about the folded edge. Which three-dimensional object below is generated by this rotation? 4) 2
More information2. To develop basic skills in the use of drawing instruments and drafting techniques.
IT-111 ENGINEERING DRAFTING SYLLABUS Instructor: R. Edward Rode= Office: Room 110-4, Anzalone Hall Hours: Refer to Schedule Phone: (985-549-2092) Fax : (985-549-5532) Email : erode@selu.edu Course Title:
More information1. Use the following directions to draw a figure in the box to the right. a. Draw two points: and. b. Use a straightedge to draw.
NYS COMMON CORE MATHEMATICS CURRICULUM Lesson 1 Homework 4 Name Date 1. Use the following directions to draw a figure in the box to the right. a. Draw two points: and. b. Use a straightedge to draw. c.
More information1 Version 2.0. Related Below-Grade and Above-Grade Standards for Purposes of Planning for Vertical Scaling:
Claim 1: Concepts and Procedures Students can explain and apply mathematical concepts and carry out mathematical procedures with precision and fluency. Content Domain: Geometry Target E [a]: Draw, construct,
More informationGEARS-IDS Invention and Design System Educational Objectives and Standards
GEARS-IDS Invention and Design System Educational Objectives and Standards The GEARS-IDS Invention and Design System is a customizable science, math and engineering, education tool. This product engages
More informationDOWNSEND SCHOOL YEAR 5 EASTER REVISION BOOKLET
DOWNSEND SCHOOL YEAR 5 EASTER REVISION BOOKLET This booklet is an optional revision aid for the Summer Exam Name: Maths Teacher: Revision List for Summer Exam Topic Junior Maths Bk 3 Place Value Chapter
More informationMCAS/DCCAS Mathematics Correlation Chart Grade 4
MCAS/DCCAS Mathematics Correlation Chart Grade 4 MCAS Finish Line Mathematics Grade 4 MCAS Standard DCCAS Standard DCCAS Standard Description Unit 1: Number Sense Lesson 1: Whole Number Place Value Lesson
More informationEngineering Technology (2010) Sample work program A. September 2010
Engineering (2010) Sample work program A September 2010 Engineering (2010) Sample work program A Compiled by the Queensland Studies Authority September 2010 A work program is the school s plan of how the
More informationGeometry Vocabulary Book
Geometry Vocabulary Book Units 2-4 Page 1 Unit 2 General Geometry Point Characteristics: Line Characteristics: Plane Characteristics: RELATED POSTULATES: Through any two points there exists exactly one
More informationMethods in Mathematics (Linked Pair Pilot)
Centre Number Surname Candidate Number For Examiner s Use Other Names Candidate Signature Examiner s Initials Methods in Mathematics (Linked Pair Pilot) Unit 2 Geometry and Algebra Monday 11 November 2013
More informationENGINEERING GRAPHICS
ENGINEERING GRAPHICS Course Structure Units Topics Marks Unit I Plane Geometry 16 1 Lines, angles and rectilinear figures 2 Circles and tangents 3 Special curves: ellipse, parabola, involute, cycloid.
More information2004 Academic Challenge
2004 Academic Challenge ENGINEERING GRAPHICS TEST - REGIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator Kevin Devine, Illinois State University
More informationGeometry Mrs. Crocker Spring 2014 Final Exam Review
Name: Mod: Geometry Mrs. Crocker Spring 2014 Final Exam Review Use this exam review to complete your flip book and to study for your upcoming exam. You must bring with you to the exam: 1. Pencil, eraser,
More information(For Engineering Trades under Group VII)
Syllabus for the subject of WORKSHOP CALCULATION Under CRAFT INSTRUCTOR TRAINING SCHEME (CITS) (For Engineering Trades under Group VII) Re-Designed in 2014 - By Government of India Ministry of Labour &
More informationCopyrighted Material. Copyrighted Material. Copyrighted. Copyrighted. Material
Engineering Graphics ORTHOGRAPHIC PROJECTION People who work with drawings develop the ability to look at lines on paper or on a computer screen and "see" the shapes of the objects the lines represent.
More informationWelcome Booklet. Version 5
Welcome Booklet Version 5 Visit the Learning Center Find all the resources you need to learn and use Sketchpad videos, tutorials, tip sheets, sample activities, and links to online resources, services,
More informationNSCAS - Math Table of Specifications
NSCAS - Math Table of Specifications MA 3. MA 3.. NUMBER: Students will communicate number sense concepts using multiple representations to reason, solve problems, and make connections within mathematics
More informationMrs. Ambre s Math Notebook
Mrs. Ambre s Math Notebook Almost everything you need to know for 7 th grade math Plus a little about 6 th grade math And a little about 8 th grade math 1 Table of Contents by Outcome Outcome Topic Page
More informationEVALUATE- work out CALCULATE work out EXPRESS show PRODUCT- multiply SUM/TOTAL- add SIMPLIFY make easier
EVALUATE- work out CALCULATE work out EXPRESS show PRODUCT- multiply SUM/TOTAL- add SIMPLIFY make easier A number with only 2 factors- 1 and itself 2 3 5 7 11 13 17 19 23 29 31 37 41 (Note 1 is not a prime
More informationIndicate whether the statement is true or false.
MATH 121 SPRING 2017 - PRACTICE FINAL EXAM Indicate whether the statement is true or false. 1. Given that point P is the midpoint of both and, it follows that. 2. If, then. 3. In a circle (or congruent
More information2. Line composed of closely and evenly spaced short dashes in a drawing represents
1. Hidden lines are drawn as (a) dashed narrow lines (b) dashed wide lines (c) long-dashed dotted wide line (d) long-dashed double dotted wide line Ans: (a) 2. Line composed of closely and evenly spaced
More informationRightStart Mathematics
Most recent update: Decdember 28, 2017 RightStart Mathematics Corrections and Updates for Level E/Grade 4 Lessons and Worksheets, second edition LESSON / WORKSHEET Lesson 38 Classroom version only CHANGE
More informationGRADE 4. M : Solve division problems without remainders. M : Recall basic addition, subtraction, and multiplication facts.
GRADE 4 Students will: Operations and Algebraic Thinking Use the four operations with whole numbers to solve problems. 1. Interpret a multiplication equation as a comparison, e.g., interpret 35 = 5 7 as
More informationS1/2 Checklist S1/2 Checklist. Whole Numbers. No. Skill Done CfE Code(s) 1 Know that a whole number is a normal counting
Whole Numbers 1 Know that a whole number is a normal counting MNU 0-0a number such as 0, 1,, 3, 4, Count past 10 MNU 0-03a 3 Know why place value is important MNU 1-0a 4 Know that approximating means to
More informationARMY PUBLIC SCHOOL, ASC CENTRE AND COLLEGE BANGALORE
ARMY PUBLIC SCHOOL, ASC CENTRE AND COLLEGE BANGALORE CLASS:VI SUBJECT: Mathematics 1 Knowing Our numbers Writing the item rates using roman numbers. Writing Indian and International number name using calendar
More informationRightStart Mathematics
Most recent update: April 18, 2018 RightStart Mathematics Corrections and Updates for Level E/Grade 4 Lessons and Worksheets, second edition LESSON / WORKSHEET CHANGE DATE Lesson 8 04/18/2018 Lesson 36
More information1. is the modification of an existing product or process. A. Invention C. Recreation B. Innovation D. Enhancement
Introduction to Engineering Design Lewis-Palmer School District #38, Monument, Colorado Fall Semester 2008 Final Exam 1. is the modification of an existing product or process. A. Invention C. Recreation
More informationSAMPLE QUESTION PAPER II ENGINEERING GRAPHICS (046)
SAMPLE QUESTION PAPER II ENGINEERING GRAPHICS (046) Time Allowed: 3 hours Maximum Marks: 70 Note: (i) Attempt all the questions. (ii) Use both sides of the drawing sheet, if necessary. (iii) All dimensions
More informationENGINEERING DRAWING. 1. Set squares are used to draw different angles. What is the angel a formed by the 45⁰ set square? Give a brief answer.
ENGINEERING DRAWING 1. Set squares are used to draw different angles. What is the angel a formed by the 45⁰ set square? Give a brief answer. 2. Which is the correct method of hatching a plane surface?
More informationPrinciples of Engineering
Principles of Engineering 2004 (Fifth Edition) Clifton Park, New York All rights reserved 1 The National Academy of Sciences Standards: 1.0 Science Inquiry 1.1 Ability necessary to do scientific inquiry
More informationNorthern York County School District Curriculum
Northern York County School District Curriculum Course Name Grade Level Mathematics Fourth grade Unit 1 Number and Operations Base Ten Time Frame 4-5 Weeks PA Common Core Standard (Descriptor) (Grades
More informationMath + 4 (Red) SEMESTER 1. { Pg. 1 } Unit 1: Whole Number Sense. Unit 2: Whole Number Operations. Unit 3: Applications of Operations
Math + 4 (Red) This research-based course focuses on computational fluency, conceptual understanding, and problem-solving. The engaging course features new graphics, learning tools, and games; adaptive
More informationENGINEERING GRAPHICS
ENGINEERING GRAPHICS CLASS - XII (046) DESIGN OF THE QUESTION PAPER Time : 3 Hrs Max. Marks : 70 The weightage of the distribution of marks over different contents of the question paper shall be as follows:
More informationClass : VI - Mathematics
O. P. JINDAL SCHOOL, RAIGARH (CG) 496 001 Phone : 07762-227042, 227293, (Extn. 227001-49801, 02, 04, 06); Fax : 07762-262613; e-mail: opjsraigarh@jspl.com; website : www.opjsrgh.in Class : VI - Mathematics
More informationDrawing Daisy Wheel Angles and Triangles
Drawing Daisy Wheel Angles and Triangles Laurie Smith Laurie Smith is an independent early-building design researcher, specialising in geometrical design systems. Because geometry was part of the medieval
More informationMulti-View Drawing Review
Multi-View Drawing Review Sacramento City College EDT 300/ENGR 306 EDT 300 / ENGR 306 - Chapter 5 1 Objectives Identify and select the various views of an object. Determine the number of views needed to
More information. line segment. 1. Draw a line segment to connect the word to its picture. ray. line. point. angle. 2. How is a line different from a line segment?
COMMON CORE MATHEMATICS CURRICULUM Lesson 1 Exit Ticket 4 1. Draw a line segment to connect the word to its picture. ray line. line segment point angle 2. How is a line different from a line segment? Lesson
More informationCommon Core State Standards 1 st Edition. Math Pacing Guide
Common Core State Standards 1 st Edition Math Pacing Guide Fourth Grade 2 nd Nine Week Period 1 st Edition Developed by: Christy Mitchell, Amy Moreman, Natalie Reno ``````````````````````````````````````````````````````````````````````````````````````
More informationStep 2: Extend the compass from the chosen endpoint so that the width of the compass is more than half the distance between the two points.
Student Name: Teacher: Date: District: Miami-Dade County Public Schools Test: 9_12 Mathematics Geometry Exam 1 Description: GEO Topic 1 Test: Tools of Geometry Form: 201 1. A student followed the given
More informationBorck Test 3 (tborck3) 2. Ms. Crow glued 4 white cubes together as shown below. Then she painted the entire figure red.
Name: Date: 1. In the figure below, the two triangular faces of the prism are right triangles with sides of length 3, 4, and 5. The other three faces are rectangles. What is the surface area of the prism?
More informationBracken County Schools Curriculum Guide Math. Grade 7 Math Unit 1: Decimal, Algebra, and Statistics Suggested Length: 5 weeks
Grade 7 Math Unit 1: Decimal, Algebra, and Statistics Suggested Length: 5 weeks Program of Studies 1. How do you evaluate and simplify algebraic expressions? 2. How can you use variables to represent everyday
More informationHPS Scope Sequence Last Revised June SUBJECT: Math GRADE: 7. Michigan Standard (GLCE) Code & Language. What this Standard means:
Number and Numeration MA.7.NS.1 (Apply and extend previous understandings of addition and subtraction to add and subtract rational numbers; represent addition and subtraction on a horizontal or vertical
More informationCore Learning Standards for Mathematics Grade 6
Core Learning Standards for Mathematics Grade 6 Write and evaluate numerical expressions involving whole-number exponents. Write, read, and evaluate expressions; identify parts of an expression using mathematical
More informationDiploma Electrical Engineering Program Educational Objectives (PEOs)
Diploma Electrical Engineering Program Educational Objectives (PEOs) PEO 1: Knowledge: Provide graduates with a strong foundation in mathematics, science and engineering fundamentals to enable them to
More informationDownloaded from ENGINEERING DRAWING. Time allowed : 3 hours Maximum Marks : 70
ENGINEERING DRAWING Time allowed : 3 hours Maximum Marks : 70 Note : (i) (ii) Attempt all the questions. Use both sides of the drawing sheet, if necessary. (iii) All dimensions are in millimeters. (iv)
More informationRefer to Blackboard for Activities and/or Resources
Lafayette Parish School System Curriculum Map Mathematics: Grade 5 Unit 4: Properties in Geometry (LCC Unit 5) Time frame: 16 Instructional Days Assess2know Testing Date: March 23, 2012 Refer to Blackboard
More informationMATHEMATICS GEOMETRY HONORS. OPTIONS FOR NEXT COURSE Algebra II, Algebra II/Trigonometry, or Algebra, Functions, and Data Analysis
Parent / Student Course Information MATHEMATICS GEOMETRY HONORS Counselors are available to assist parents and students with course selections and career planning. Parents may arrange to meet with the
More informationGrade 6 Middle School Mathematics Contest A parking lot holds 64 cars. The parking lot is 7/8 filled. How many spaces remain in the lot?
Grade 6 Middle School Mathematics Contest 2004 1 1. A parking lot holds 64 cars. The parking lot is 7/8 filled. How many spaces remain in the lot? a. 6 b. 8 c. 16 d. 48 e. 56 2. How many different prime
More information9/4/2013. Math. Curriculum Council September 5, topics nouns What? rigor verbs How?
Math Curriculum Council September 5, 2013 Cognitive Change rigor verbs How? Content Change topics nouns What? 1 CHANGES TO STUDENT EXPECTATIONS NEW Standard Change of Grade Level Change of Strand Other
More informationKansas City Area Teachers of Mathematics 2011 KCATM Contest
Kansas City Area Teachers of Mathematics 2011 KCATM Contest GEOMETRY AND MEASUREMENT TEST GRADE 4 INSTRUCTIONS Do not open this booklet until instructed to do so. Time limit: 15 minutes You may use calculators
More informationDWG 002. Blueprint Reading. Geometric Terminology Orthographic Projection. Instructor Guide
DWG 002 Blueprint Reading Geometric Terminology Orthographic Projection Instructor Guide Introduction Module Purpose The purpose of the Blueprint Reading modules is to introduce students to production
More informationProgressive Primary Mathematics Book 6: Sample Schemes of Work: Term One
Progressive Primary Mathematics Book 6: Sample : Term One WEEK 1 1 Whole Place values of pupils should be able to recognize identify the place values total values of, read write in words in figures up
More informationIntroduction to Engineering Design
Prerequisite: None Credit Value: 5 ABSTRACT The Introduction to Engineering Design course is the first in the Project Lead The Way preengineering sequence. Students are introduced to the design process,
More informationGrade 4 + DIGITAL. EL Strategies. DOK 1-4 RTI Tiers 1-3. Flexible Supplemental K-8 ELA & Math Online & Print
Standards PLUS Flexible Supplemental K-8 ELA & Math Online & Print Grade 4 SAMPLER Mathematics EL Strategies DOK 1-4 RTI Tiers 1-3 15-20 Minute Lessons Assessments Consistent with CA Testing Technology
More informationAQA GCSE Linear Calculator Examination Foundation - June 9th 2016
Foundation - June 9th 2016 Clip Name of Clip Grade Comment 4 Reading Scales E, F and G Quick revision 9 Square and Cube Numbers E, F and G Quick revision 20 Decimal Places & Significant Figures E, F and
More informationM7NS-Ia-2 2 Grade 7 LG-Math (pp.5-9) Pictures, PowerPoint presentation 3 Uses Venn Diagrams to represent sets, subsets, and set operations.
FIRST QUARTER NUMBER SENSE 1 Describes well-defined sets, subsets, and the null set and cardinality of sets. M7NS-Ia-1 4 Grade 7 LG-Math (pp.1-4) Pictures, PowerPoint presentation 2 Illustrates the union
More informationTenMarks Curriculum Alignment Guide: EngageNY/Eureka Math, Grade 7
EngageNY Module 1: Ratios and Proportional Relationships Topic A: Proportional Relationships Lesson 1 Lesson 2 Lesson 3 Understand equivalent ratios, rate, and unit rate related to a Understand proportional
More informationSample Questions from Ga. Department of Education
Strand: Measurements & Geometry Sample Questions from Ga. Department of Education Name: Concept 1 (M18 M21): Measurements (including metric) Estimates measures in both customary and metric systems. 1.
More informationThe Magic Circle Basic Lesson. Developed by The Alexandria Seaport Foundation
The Magic Circle Basic Lesson Developed by The Alexandria Seaport Foundation The Tools Needed Compass Straightedge Pencil Paper (not graph paper, 8.5 x 11 is fine) Your Brain (the most important tool!)
More informationCDT: DESIGN AND COMMUNICATION
CDT: DESIGN AND COMMUNICATION Paper 7048/01 Structured Key message Whilst many excellent answers were seen, the following were considered to be areas where improvement could be made: the correct positioning
More informationENGINEERING DRAWING IM 09 AND GRAPHICAL COMMUNICATION
IM SYLLABUS (2014) ENGINEERING DRAWING IM 09 AND GRAPHICAL COMMUNICATION SYLLABUS Engineering Drawing and Graphical Communication IM 09 (Available in September) Syllabus 1 Paper (3 hours) Aims The aims
More informationDELHI TECHNOLOGICAL UNIVERSITY ENGINEERING GRAPHICS LAB MANUAL
DELHI TECHNOLOGICAL UNIVERSITY ENGINEERING GRAPHICS LAB MANUAL NAME: - ROLL NO: - GROUP: - BRANCH: - GROUP TEACHER: Page 1 www.rooplalrana.com 1 GENERAL INSTRUCTIONS FOR ENGG. GRAPHICS LAB 1) Students
More informationGeometry 1 FINAL REVIEW 2011
Geometry 1 FINL RVIW 2011 1) lways, Sometimes, or Never. If you answer sometimes, give an eample for when it is true and an eample for when it is not true. a) rhombus is a square. b) square is a parallelogram.
More information