Multi-View Drawing Review
|
|
|
- Derrick Maxwell
- 5 years ago
- Views:
Transcription
1 Multi-View Drawing Review Sacramento City College EDT 300/ENGR 306 EDT 300 / ENGR Chapter 5 1
2 Objectives Identify and select the various views of an object. Determine the number of views needed to describe fully the shape and size of an object. Define the term orthographic projection Describe the difference between first and third-angle projection. 2 EDT 300 / ENGR Chapter 5
3 Objectives Visualize the glass box concept and apply it to the process of selecting and locating views on a drawing. 3 EDT 300 / ENGR Chapter 5
4 Objectives Develop a multi-view drawing, following a prescribed step-by-step process, from the initial idea to a finished drawing. 4 EDT 300 / ENGR Chapter 5
5 Vocabulary First angle projection Front View Horizontal Plane Implementation Multi-view Drawing Negative Cylinder Normal Views Orthographic Projection Pictorial Drawing 5 EDT 300 / ENGR Chapter 5 Profile plane Quadrant Right-side View Solid Model Spherical Third-angle Projection Top View Vertical Plane Visualization
6 Communication People communicate by verbal and written language and graphic (pictorial) means. Technical drawings are a graphical means to communicate. When accurate visual understanding is necessary, technical drawing is the most exact method that can be used. 6 EDT 300 / ENGR Chapter 5
7 Visualization and Implementation Technical drawing involves: Visualization The ability to see clearly in the mind s eye what a machine, device or object looks like. Implementation The process of drawing the object that has been visualized. 7 EDT 300 / ENGR Chapter 5
8 Visualization and Implementation A technical drawing, properly made, gives a clearer, more accurate description of an object than a photograph or written explanation. 8 EDT 300 / ENGR Chapter 5
9 Visualization and Implementation Technical drawings made according to standard rules result in views that give an exact visual description of an object. The multi-view drawing is the major type of drawing used in the industry. 9 EDT 300 / ENGR Chapter 5
10 Multi-View Drawing A photograph can show three views Front. Top. Right Side. Nearly all objects have six sides, not three. 10 EDT 300 / ENGR Chapter 5
11 Multi-View Drawing 11 EDT 300 / ENGR Chapter 5
12 Multi-View Drawing If an object could be shown in a single photograph, it would also include A left-side view. A rear view. A bottom view. 12 EDT 300 / ENGR Chapter 5
13 Pictorial Drawing An object cannot be photographed if it has not been built (!) This limits the usefulness of photographs to show what an object looks like (!) 13 EDT 300 / ENGR Chapter 5
14 Pictorial Drawing A pictorial drawing Is a drawing. Shows an object as it would appear in a photograph. Shows the way an object looks, in general. It does not show, the exact forms and relationships of the parts that make up the object. 14 EDT 300 / ENGR Chapter 5
15 Pictorial Drawing A pictorial drawing Shows the object as it appears, not as it really is. Holes in the base appear as ellipses, not as true circles. 15 EDT 300 / ENGR Chapter 5
16 Pictorial Drawing Photograph Pictorial Drawing 16 EDT 300 / ENGR Chapter 5
17 Multi-View Drawing The goal, is to represent an object on a sheet of paper in a way that described its exact shape and proportions. To do this: Draw views of the object as it is seen from different positions. 17 EDT 300 / ENGR Chapter 5
18 Multi-View Drawing These views are then arranged in a standard order. Anyone familiar with drafting practices can understand them immediately. 18 EDT 300 / ENGR Chapter 5
19 Multi-View Drawing To describe accurately the shape of each view imagine a position Directly in front of the object. Directly above the object. On the right side of the object. 19 EDT 300 / ENGR Chapter 5
20 Multi-View Drawing The front, top and right side views are the ones most often used to describe an object in technical drawing. They are called the Normal views. 20 EDT 300 / ENGR Chapter 5
21 The Relationship of Views Views must be placed in proper relationship to each other. The Top View is directly above the Front View The Right-side View is directly to the right of the Front View. 21 EDT 300 / ENGR Chapter 5
22 The Relationship of Views When the views are placed in proper relationship to one another, the result is a multi-view drawing. Multi-view drawing is the exact representation of an object on one plane. 22 EDT 300 / ENGR Chapter 5
23 The Relationship of Views Other views may also be required. The proper relationship of the six views is shown below Top View Normal views Rear View Left-side View Front View Right-side View Bottom View 23 EDT 300 / ENGR Chapter 5
24 V-Block 24 EDT 300 / ENGR Chapter 5
25 Orthographic Projection These views are developed through the principles of orthographic projection Ortho - straight or at right angles. Graphic - written or drawn. Projection - from two Latin words: Pro, meaning forward Jacere, meaning to throw The literal meaning is thrown forward, drawn at right angles. 25 EDT 300 / ENGR Chapter 5
26 Orthographic Projection Definition: Orthographic projection is: the method of representing the exact form of an object in two or more views on planes usually at right angles to each other, by lines drawn perpendicular from the object to the planes. 26 EDT 300 / ENGR Chapter 5
27 Orthographic Projection An orthographic projection drawing is a representation of the separate views of an object on a two-dimensional surface. It reveals the width, depth and height of an object. 27 EDT 300 / ENGR Chapter 5
28 Orthographic Projection 28 EDT 300 / ENGR Chapter 5
29 Angles of Projection EDT 300 / ENGR Chapter 5 29
30 Angles of Projection On a technical drawing, a plane is an imaginary flat surface that has no thickness. Orthographic projection involves the use of three planes. Vertical plane. Horizontal plane. Profile plane. A view of an object is projected and drawn on each plane. 30 EDT 300 / ENGR Chapter 5
31 Angles of Projection The vertical and horizontal planes divide space into four quadrants (quarters of a circle). In orthographic projection, quadrants are usually called angles. Thus we get the name, first-angle projection and third angle projection 31 EDT 300 / ENGR Chapter 5
32 Angles of Projection First angle projection is used in European countries. Third angle projection is used in the US and Canada. Second and fourth angle projection is not used. 32 EDT 300 / ENGR Chapter 5
33 First Angle Projection First angle projection Front view = vertical plane. Top view = horizontal plane. Left side view = profile plane. 33 EDT 300 / ENGR Chapter 5
34 First Angle Projection In first angle projection, the Front View is located above the Top View. The Left-side View is to the right of the Front View. Refer to Figure EDT 300 / ENGR Chapter 5
35 First Angle Projection In first-angle projection, the projection plane is on the far side of the object from the viewer. The view of the object are projected to the rear and onto the projection plane instead of being projected forward. 35 EDT 300 / ENGR Chapter 5
36 Third Angle Projection Third angle projection Front view = vertical plane. Top view = horizontal plane. Right side view = profile plane. 36 EDT 300 / ENGR Chapter 5
37 Third Angle Projection In third angle projection, the Top View is located above the Front View. The Right-Side View is to the right of the Front View. Refer to Figure EDT 300 / ENGR Chapter 5
38 Third Angle Projection In third-angle projection, the projection plane is considered to be between the view and the object, and the views are projected forward to that plane. 38 EDT 300 / ENGR Chapter 5
39 Third Angle Projection The views appear in their natural positions when the views are revolved into the same plane as the frontal plane The top view appears above the front view. The right-side view is to the right of the front view. The left view to the left of the front view. 39 EDT 300 / ENGR Chapter 5
40 The Glass Box EDT 300 / ENGR Chapter 5 40
41 The Glass Box In each case the three views have been developed by using imaginary transparent planes. The views are projected onto these planes. 41 EDT 300 / ENGR Chapter 5
42 The Glass Box Visualize a glass box around the object Project the view of the object onto a side of the box. Unfold the box to one plane. The views will be in their relative positions. 42 EDT 300 / ENGR Chapter 5
43 The Glass Box 43 EDT 300 / ENGR Chapter 5
44 The Glass Box 44 EDT 300 / ENGR Chapter 5
45 Projection of Lines EDT 300 / ENGR Chapter 5 45
46 Projection of Lines There are four kinds of straight lines found on objects in drawings Horizontal. Vertical. Inclined. Oblique. Each line is projected by locating its endpoint. 46 EDT 300 / ENGR Chapter 5
47 Horizontal Lines Horizontal lines Are parallel to the horizontal plane of projection. Are parallel to one of the planes. Are perpendicular to the third plane. Appear as true length in two of the planes. Appear as a point in the third. 47 EDT 300 / ENGR Chapter 5
48 Vertical Lines Vertical Lines Are parallel to the frontal plane. Are parallel to the profile plane. Are perpendicular to the horizontal plane. Appear true length in the frontal and profile planes. Appear as a point in the horizontal plane. 48 EDT 300 / ENGR Chapter 5
49 Inclined Lines Inclined Lines Are parallel to one plane of projection. Are inclined in the other two planes. Appear true length in one of the planes. Appear shortened in the other two planes. 49 EDT 300 / ENGR Chapter 5
50 Oblique Lines Oblique Lines Are neither parallel nor perpendicular to any of the planes or projections (!) Appear shortened in all three planes of projection. 50 EDT 300 / ENGR Chapter 5
51 Curved Lines Curved Lines may be Circular. Elliptical. Parabolic. Hyperbolic. Some other geometric curve form. They may also be irregular curves. 51 EDT 300 / ENGR Chapter 5
52 Projection of Surfaces Surfaces may be Horizontal. Vertical. Inclined. Oblique. Curved. They are drawn by locating the end points of the lines that outline their shape. 52 EDT 300 / ENGR Chapter 5
53 Horizontal Surfaces Horizontal surfaces Are parallel to the horizontal projection plane Appear true size and shape in the Top View. 53 EDT 300 / ENGR Chapter 5
54 Vertical Surfaces Vertical surfaces Are parallel to one or the other of the frontal or profile planes, and Appear in their true size and shape in the Front View or the Right-side View. They are perpendicular to the other two planes and appear as lines in these planes 54 EDT 300 / ENGR Chapter 5
55 Inclined Surfaces Inclined surfaces Are neither horizontal nor vertical Are perpendicular to one of the projection planes and appear as a true length line in this view 55 EDT 300 / ENGR Chapter 5
56 Oblique Surfaces Oblique Surfaces Are neither parallel nor perpendicular to any of the planes of projection. They appear as a surface in all views but not in their true size and shape 56 EDT 300 / ENGR Chapter 5
57 Curved Surfaces EDT 300 / ENGR Chapter 5 57
58 Curved Surfaces May be a single curved surface (cone or cylinder) a double curved surface (sphere, spheroid or torus a warped surface 58 EDT 300 / ENGR Chapter 5
59 Curved Surfaces Appear as circles in one view and as rectangles in the other view 59 EDT 300 / ENGR Chapter 5
60 Techniques for Special Lines and Surfaces EDT 300 / ENGR Chapter 5 60
61 Techniques for Special Lines and Surfaces To describe an object fully, show every feature in every view, whether or not it can ordinarily be seen Also include other lines that are not part of the object to clarify relationships and positions in the drawing 61 EDT 300 / ENGR Chapter 5
62 Techniques for Special Lines and Surfaces Special line symbols are used to differentiate between object lines and lines that have other special meanings 62 EDT 300 / ENGR Chapter 5
63 Hidden Lines EDT 300 / ENGR Chapter 5 63
64 Hidden Lines Both interior and exterior features are projected in the same way. 64 EDT 300 / ENGR Chapter 5
65 Hidden Lines Parts that cannot be seen in the views are drawn with hidden lines. Hidden lines are made up of short dashes. 65 EDT 300 / ENGR Chapter 5
66 Hidden Lines The first line of a hidden line touches the line where it starts. Refer to Figure 5-18A. 66 EDT 300 / ENGR Chapter 5
67 Hidden Lines If a hidden line is a continuation of a visible line, space is left between the visible line and the first dash of the hidden line. Refer to Figure 5-18B. 67 EDT 300 / ENGR Chapter 5
68 Hidden Lines If the hidden lines show corners, the dashes touch the corners. Refer to Figure 5-18C. 68 EDT 300 / ENGR Chapter 5
69 Hidden Lines Dashes for hidden arcs start and end at the tangent points. Refer to Figure 5-19A. 69 EDT 300 / ENGR Chapter 5
70 Hidden Lines When a hidden arc is tangent to a visible line, leave a space. Refer to Figure 5-19B. 70 EDT 300 / ENGR Chapter 5
71 Hidden Lines When a hidden line and a visible line project at the same place, show the visible line. Refer to Figure 5-19C. 71 EDT 300 / ENGR Chapter 5
72 Hidden Lines When a centerline and a hidden line project at the same place, draw the hidden line. Refer to Figure 5-20A. 72 EDT 300 / ENGR Chapter 5
73 Hidden Lines When a hidden line crosses a visible line, do not cross the visible line with a dash. Refer to Figure 5-20B. 73 EDT 300 / ENGR Chapter 5
74 Hidden Lines When hidden lines cross, the nearest hidden line has the right of way Draw the nearest hidden line through a space in the farther hidden line. 74 EDT 300 / ENGR Chapter 5
75 Centerlines EDT 300 / ENGR Chapter 5 75
76 Centerlines Centerlines are special lines used to locate views and dimensions. 76 EDT 300 / ENGR Chapter 5
77 Centerlines Primary centerlines Locate the center on symmetrical views in which one part is a mirror image of another. Are used as major locating lines to help in making the views. They are also used as base lines for dimensioning. Are drawn first. 77 EDT 300 / ENGR Chapter 5
78 Centerlines Secondary centerlines are used for drawing details of a part 78 EDT 300 / ENGR Chapter 5
79 Precedence of Lines EDT 300 / ENGR Chapter 5 79
80 Precedence of Lines The following priority of lines exists: 1. Visible lines. 2. Invisible lines. 3. Cutting-plane lines. 4. Center lines. 5. Break lines. 6. Dimension and extension lines. 7. Section lines (crosshatching). 80 EDT 300 / ENGR Chapter 5
81 Curved Surfaces EDT 300 / ENGR Chapter 5 81
82 Curved Surfaces Some curved surfaces, such as cylinders and cones do not show curved surfaces in all views. 82 EDT 300 / ENGR Chapter 5
83 Curved Surfaces A cylinder with its axis perpendicular to a plane will show as a circle on that plane and as a rectangle on the other two planes. 83 EDT 300 / ENGR Chapter 5
84 Curved Surfaces A cylinder with its axis perpendicular to a plane will show as a circle on that plane and as a rectangle on the other two planes. 84 EDT 300 / ENGR Chapter 5
85 Curved Surfaces The holes may be thought of as negative cylinders In mathematics, negative means an amount less than zero. A hole is a nothing cylinder, but it does have size. 85 EDT 300 / ENGR Chapter 5
86 Cones A cone appears as a circle in one view. It appears as a triangle in the other view. 86 EDT 300 / ENGR Chapter 5
87 Cones One view of a frustum of a cone appears as two circles In the top view, the conical surface is represented by the space between the two circles. 87 EDT 300 / ENGR Chapter 5
88 Cones Cylinders, cones and frustums of cones have single curved surfaces. The appear as circles in one view and straight lines in another. 88 EDT 300 / ENGR Chapter 5
89 Deciding Which Views To Draw EDT 300 / ENGR Chapter 5 89
90 Deciding Which View to Draw Six views are not needed to describe most objects. Usually three views are sufficient. 90 EDT 300 / ENGR Chapter 5
91 Deciding Which View to Draw Most pieces can be recognized because they have a characteristic view. This is the first view to consider, and usually is the first view to draw. Next, consider the normal position of the part when it is in use. 91 EDT 300 / ENGR Chapter 5
92 Deciding Which View to Draw Views with the fewest hidden lines are easiest to read, and require less time to draw. 92 EDT 300 / ENGR Chapter 5
93 Deciding Which View to Draw The main purpose of drawing views is to describe the shape of the object. It is a waste of time to make more views than are necessary to describe the object. 93 EDT 300 / ENGR Chapter 5
94 Deciding Which View to Draw Some parts can be described in only one view. Figure 5-23 A. Sheet material: plywood Parts of uniform thickness The thickness can be given in a note. 94 EDT 300 / ENGR Chapter 5
95 Deciding Which View to Draw 95 EDT 300 / ENGR Chapter 5
96 Deciding Which View to Draw 96 EDT 300 / ENGR Chapter 5
97 Deciding Which View to Draw 97 EDT 300 / ENGR Chapter 5
98 Deciding Which View to Draw Some parts can be described in only one view. Compare 5-24 C and D. 98 EDT 300 / ENGR Chapter 5
99 Deciding Which View to Draw Some parts can be described in two views. Figure 5-25 A, B, C, D, E. 99 EDT 300 / ENGR Chapter 5
100 Deciding Which View to Draw 100 EDT 300 / ENGR Chapter 5
101 Deciding Which View to Draw 101 EDT 300 / ENGR Chapter 5
102 Deciding Which View to Draw Examples of parts that can be drawn in two views: Figure 5-26 A - F. 102 EDT 300 / ENGR Chapter 5
103 Deciding Which View To Draw Long and narrow objects may suggest top and front view. Short and broad objects may suggest top and right-side views. Right side is preferred over left-side when a choices is available. Top view is preferred over bottom view when a choice is available. 103 EDT 300 / ENGR Chapter 5
104 Placing Views EDT 300 / ENGR Chapter 5 104
105 Placing Views The size of the drawing sheet should allow enough space for the number of views needed to give a clear description of the part. The method for determining the positions of the views is the same for any space. 105 EDT 300 / ENGR Chapter 5
106 Placing Views The working space of a drawing is the area inside the border. Objects are never drawn directly touching the border. Objects are drawn so there is a space between the object and the border line. Refer to Figure EDT 300 / ENGR Chapter 5
107 Placing Views 1. Measure the available drawing area using the scale of the drawing. 2. Subtract out the space occupied by the object Horizontal: Vertical: Front View Right side View 3. Divide the remaining area by 4 Put one part each On left of Front View On right of Front View On left of Right Side View On right of Right Side View Front View Top View 107 EDT 300 / ENGR Chapter 5
108 Placing Views Converting decimals to fractions. 1. Use page 699 in text Look up decimal Look to left to find equivalent fraction 2. Convert fractions to 12ths of an inch 0.38 = 3/8 3/8 = x/12 8x = 36 x = 4.5 / EDT 300 / ENGR Chapter 5
109 Figure EDT 300 / ENGR Chapter 5
110 Figure EDT 300 / ENGR Chapter 5
111 Placing Views 1. Add the width and the depth of the object. 111 EDT 300 / ENGR Chapter 5
112 Placing Views 1. Add the width and the depth of the object. For the Base, Fig 5-63, p152, The width is: 7.50 The height is: The depth is: 3.25 Width + depth = = EDT 300 / ENGR Chapter 5
113 Placing Views 2. Subtract this total from the width of the drawing space. Refer to Figure A space of about 1 is commonly left between the Side View and the Front View. Space may be larger or smaller, depending upon the shapes of the views. 113 EDT 300 / ENGR Chapter 5
114 Figure EDT 300 / ENGR Chapter 5
115 Placing Views 2. Subtract this total from the width of the drawing space. For the Base, Fig 5-63, p152, Drawing Space width = = 10.5 max. Width + depth = = EDT 300 / ENGR Chapter 5
116 Placing Views 3. Add the height and the depth of the object. 4. Subtract this total from the height of the drawing space. 5. Divide the remaining space evenly. 116 EDT 300 / ENGR Chapter 5
117 Figure EDT 300 / ENGR Chapter 5
118 Locating and Transferring Measurements EDT 300 / ENGR Chapter 5 118
119 Locating Measurements Measurements made on one view can be transferred to another. This process also insures accuracy. Refer to Figure EDT 300 / ENGR Chapter 5
120 Locating Measurements 1. Draw upward from the Front view to locate width measurements in the Top view Draw downward from the top view to locate width measurements on the Front view. 120 EDT 300 / ENGR Chapter 5
121 Locating Measurements 2. Draw a light line across to the Side view from the Front view to locate height measurements Use a similar method to project height measurements from the side view to the front view 121 EDT 300 / ENGR Chapter 5
122 Locating Measurements Height of Front view - transfer to Rightside view. Depth measurements show as vertical distances in the Top view and as horizontal distances in the the Rightside view. 122 EDT 300 / ENGR Chapter 5
123 Locating Measurements 123 EDT 300 / ENGR Chapter 5
124 Locating Measurements 124 EDT 300 / ENGR Chapter 5
125 Locating Measurements 3. Depth measurements show as Vertical distances - Top view Horizontal distances - Right-side view To transfer these measurements use Arcs 45 o triangle Dividers Scale 125 EDT 300 / ENGR Chapter 5
126 Using Arcs to Transfer 126 EDT 300 / ENGR Chapter 5
127 Using Scale to Transfer 127 EDT 300 / ENGR Chapter 5
128 Using 45 Line to Transfer 128 EDT 300 / ENGR Chapter 5
129 Summary of Steps Follow a step-by-step method to insure accuracy Carry all views along together Do not attempt to finish one view before starting the others Use a hard lead pencil (4H or 6H) and light, thin lines for preliminary (layout) lines Use F, HB or H for final lines 129 EDT 300 / ENGR Chapter 5
130 Summary of Steps 1. Consider the Characteristic View first. 2. Determine the number of views. 3. Locate the views. 4. Block in the views with light, thin layout lines. 5. Lay off the principal measurements. 130 EDT 300 / ENGR Chapter 5
131 Summary of Steps 6. Draw the principal lines. 7. Lay off the measurements for details such as centers for arcs, circles and ribs. 8. Draw the circles and arcs. 9. Draw any additional lines needed to complete views. 131 EDT 300 / ENGR Chapter 5
132 Summary of Steps 10. Darken the lines where necessary to make them sharp and black and of proper thickness 132 EDT 300 / ENGR Chapter 5
Student Name: Teacher: Date: District: Rowan. Assessment: 9_12 T and I IC61 - Drafting I Test 1. Description: Unit C - Sketching - Test 2.
Student Name: Teacher: Date: District: Rowan Assessment: 9_12 T and I IC61 - Drafting I Test 1 Description: Unit C - Sketching - Test 2 Form: 501 1. The most often used combination of views includes the:
Copyrighted Material. Copyrighted Material. Copyrighted. Copyrighted. Material
Engineering Graphics ORTHOGRAPHIC PROJECTION People who work with drawings develop the ability to look at lines on paper or on a computer screen and "see" the shapes of the objects the lines represent.
Multiview Drawing. Definition: Graphical representation of a 3- dimensional object on one plane (sheet of paper) using two or more views.
Multiview Drawing Definition: Graphical representation of a 3- dimensional object on one plane (sheet of paper) using two or more views. Multiview Drawing Another name for multiview drawing is orthographic
UNIT 5a STANDARD ORTHOGRAPHIC VIEW DRAWINGS
UNIT 5a STANDARD ORTHOGRAPHIC VIEW DRAWINGS 5.1 Introduction Orthographic views are 2D images of a 3D object obtained by viewing it from different orthogonal directions. Six principal views are possible
ORTHOGRAPHIC PROJECTIONS. Ms. Sicola
ORTHOGRAPHIC PROJECTIONS Ms. Sicola Objectives List the six principal views of projection Sketch the top, front and right-side views of an object with normal, inclined, and oblique surfaces Objectives
ORTHOGRAPHIC PROJECTION
ORTHOGRAPHIC PROJECTION C H A P T E R S I X OBJECTIVES 1. Recognize and the symbol for third-angle projection. 2. List the six principal views of projection. 3. Understand which views show depth in a drawing
Technological Design Mr. Wadowski. Orthographic & Isometric Drawing Lesson
Technological Design Mr. Wadowski Orthographic & Isometric Drawing Lesson TOPICS Working Drawings, Isometric Drawings & Orthographic Drawings Glass box concept Multiview projection Orthographic projection
CLASS views from detail on a grid paper. (use appropriate line types to show features) - Optional views. Turn in for grading on class 6 (06/04)
CLASS 4 Review: - Projections - Orthographic projections Lab: - 3 views from detail on a grid paper. (use appropriate line types to show features) - Optional views. Turn in for grading on class 6 (06/04)
Multiviews and Auxiliary Views
Multiviews and Auxiliary Views Multiviews and Auxiliary Views Objectives Explain orthographic and multiview projection. Identifying the six principal views. Apply standard line practices to multiviews
Orthographic Projection
Orthographic Projection Why Orthographic Projection is used in technical drawing Orthographic projection is a method of producing a number of separate two-dimensional inter-related views, which are mutually
Engineering Graphics, Class 8 Orthographic Projection. Mohammad I. Kilani. Mechanical Engineering Department University of Jordan
Engineering Graphics, Class 8 Orthographic Projection Mohammad I. Kilani Mechanical Engineering Department University of Jordan Multi view drawings Multi view drawings provide accurate shape descriptions
Graphical Communication
Chapter 9 Graphical Communication mmm Becoming a fully competent engineer is a long yet rewarding process that requires the acquisition of many diverse skills and a wide body of knowledge. Learning most
Interpretation of Drawings. An Introduction to the Basic Concepts of Creating Technical Drawings
Interpretation of Drawings An Introduction to the Basic Concepts of Creating Technical Drawings Introduction In the design process drawings are the main way in which information about an object or product
Describing an Angle Bracket
Basics of Drafting Describing an Angle Bracket Orthographic Projection Orthographic drawings represent three dimensional objects in three separate views arranged in a standard manner. Orthographic Views
Civil Engineering Drawing
Civil Engineering Drawing Third Angle Projection In third angle projection, front view is always drawn at the bottom, top view just above the front view, and end view, is drawn on that side of the front
Beginning Engineering Graphics 3 rd Week Lecture Notes Instructor: Edward N. Locke Topic: The Coordinate System, Types of Drawings and Orthographic
Beginning Engineering Graphics 3 rd Week Lecture Notes Instructor: Edward N. Locke Topic: The Coordinate System, Types of Drawings and Orthographic 1 st Subject: The Cartesian Coordinate System The Cartesian
Engineering Drawing Lecture 5 PROJECTION THEORY
University of Palestine College of Engineering & Urban Planning First Level Engineering Drawing Lecture 5 PROJECTION THEORY Lecturer: Eng. Eman Al.Swaity Eng.Heba hamad PART 1 PROJECTION METHOD TOPICS
At the conclusion of this unit you should be able to accomplish the following with a 70% accuracy
7 Multiview Drawing OBJECTIVES At the conclusion of this unit you should be able to accomplish the following with a 70% accuracy 1. explain the importance of mulitview drawing as a communication tool far
CE 100 Civil Engineering Drawing Sessional (Lab Manual)
CE 100 Civil Engineering Drawing Sessional (Lab Manual) Department of Civil Engineering Ahsanullah University of Science and Technology November, 2017 1 Preface This course is designed to provide civil
1. When sketching long, narrow objects in OBLIQUE, distortion can be lessened by placing the long dimension along:
Draft Student Name: Teacher: District: Date: Wake County Test: 9_12 T and I IC61 - Drafting I Test 2 Description: 3.03 Apply 3D sketching Form: 501 1. When sketching long, narrow objects in OBLIQUE, distortion
Unit-5 ISOMETRIC PROJECTION
Unit-5 ISOMETRIC PROJECTION Importance Points in Isometric: 1. For drawing the isometric, the object must be viewed such that either the front -right or the left edges becomes nearest. 2. All vertical
Orthographic Projection 1
Orthographic Projection 1 What Is Orthographic Projection? Basically it is a way a representing a 3D object on a piece of paper. This means we make the object becomes 2D. The difference between Orthographic
11/12/2015 CHAPTER 7. Axonometric Drawings (cont.) Axonometric Drawings (cont.) Isometric Projections (cont.) 1) Axonometric Drawings
CHAPTER 7 1) Axonometric Drawings 1) Introduction Isometric & Oblique Projection Axonometric projection is a parallel projection technique used to create a pictorial drawing of an object by rotating the
ORTHOGRAPHIC PROJECTION
ORTHOGRAPHIC PROJECTION INTRODUCTION Any object has three dimensions, that is, length, width and thickness. A projection is defined as a representation of an object on a two dimensional plane. The projections
60 Most Important Engineering Drawing Questions
1. If a client of yours is having difficulty visualizing a design, what type of drawing would be the easiest to understand? A. axonometric B. three-view orthographic C. one-view orthographic D. bimetric
Sketching in SciTech. What you need to know for graphic communication
Sketching in SciTech What you need to know for graphic communication Sketching in your Logbook Use pencil Take up the WHOLE PAGE Label things 1. Proportion Each part of the sketch is the right size,
ME 111: Engineering Drawing
ME 111: Engineering Drawing Lecture 5 12-08-2011 Orthographic projection and Projection of Points Indian Institute of Technology Guwahati Guwahati 781039 1 Orthographic Projection A parallel projection
Surface Developments. Sacramento City College Engineering Design Technology. Surface Developments 1
Surface Developments Sacramento City College Engineering Design Technology Surface Developments 1 Surface Developments A surface development is a full-size layout of an object made on a single flat plane.
DMT113 Engineering Drawing. Chapter 3 Stretch System
DMT113 Engineering Drawing Chapter 3 Stretch System Contents Theory & Multiview Planes 6 Principle Views Multiview Sketching Technique & Perspective First & Third Angle Multiview Representations Theory
(As per New Revised Syllabus of Anna University) Department of Mechanical Engineering. SATHYABAMA UNIVERSITY Jeppiaar Nagar, Chennai
(1*,1((5,1* *5$3+,&6 (As per New Revised Syllabus of Anna University) Dr. S.RAMACHANDRAN, M.E., Ph.D. Professor & Head K. PANDIAN, M.E., E.V.V.RAMANAMURTHY, M.Tech., R. DEVARAJ, M.E., Associate Professors
ENGINEERING GRAPHICS ESSENTIALS
ENGINEERING GRAPHICS ESSENTIALS Text and Digital Learning KIRSTIE PLANTENBERG FIFTH EDITION SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com ACCESS CODE UNIQUE CODE INSIDE
ME1105 Engineering Drawing & Design
City University London Term 1 Assessment 2008/2009 School of Engineering and Mathematical Sciences ME1105 Engineering Drawing & Design Student Name:.., Group: Examination duration: Reading time: This paper
ENGINEERING DRAWING. 1. Set squares are used to draw different angles. What is the angel a formed by the 45⁰ set square? Give a brief answer.
ENGINEERING DRAWING 1. Set squares are used to draw different angles. What is the angel a formed by the 45⁰ set square? Give a brief answer. 2. Which is the correct method of hatching a plane surface?
Add labels to the sides...
Orthographic Drawings Orthographic Projection A projection on a plane, using lines perpendicular to the plane Graphic communications has many forms. Orthographics is one such form. It was developed as
ENGINEERING GRAPHICS 1E9
Lecture 3 Monday, 15 December 2014 1 ENGINEERING GRAPHICS 1E9 Lecture 3: Isometric Projections Lecture 3 Monday, 15 December 2014 2 What is ISOMETRIC? It is a method of producing pictorial view of an object
(Ans:d) a. A0 b. A1 c. A2 d. A3. (Ans:b) (Ans:a) (Ans:d) (Ans:d)
Multiple Choice Questions (MCQ) on Engineering Drawing (Instruments) The mini drafter serves the purpose of everything except a. Scales b. Set square c. Protractor d. Compass (Ans:d) During operation,
Chapter 8. Technical Drawings
Chapter 8 Technical Drawing Technical Drawings Multiview drawings Also called three-view drawings Simple objects take three views Front, top, one side Title block Identifies who did the design Gives date,
Chapter 5 SECTIONS OF SOLIDS 5.1 INTRODUCTION
Chapter 5 SECTIONS OF SOLIDS 5.1 INTRODUCTION We have studied about the orthographic projections in which a 3 dimensional object is detailed in 2-dimension. These objects are simple. In engineering most
Multiview Projection
DFTG-1305 Technical Drafting Prof. Francis Ha Session 4 Multiview Projection (or Orthographic Projection) Reading: Geisecke s textbook: 14 th Ed. Chapter 5 p.162 15 th Ed. Chapter 6 p.232 Update: 17-0510
PROJECTIONS PARALLEL CONICAL PROJECTIONS PROJECTIONS OBLIQUE ORTHOGRAPHIC PROJECTIONS PROJECTIONS
PROJECTIONS CONICAL PROJECTIONS PARALLEL PROJECTIONS OBLIQUE PROJECTIONS ORTHOGRAPHIC PROJECTIONS ISOMETRIC MULTI-VIEW an object; The Description of Forms Behind every drawing of an object is space relationship
ENGR 1182 Exam 1 First Mid Term Exam Study Guide and Practice Problems
Spring Semester 2016 ENGR 1182 Exam 1 First Mid Term Exam Study Guide and Practice Problems Disclaimer Problems in this study guide resemble problems relating mainly to the pertinent homework assignments.
MULTIPLE CHOICE QUESTIONS - CHAPTER 6
MULTIPLE CHOICE QUESTIONS - CHAPTER 6 1. The selection of the front view in executing a multiview drawing of an object is dependent upon the following factors: a. size and shape of the object and their
Isometric Drawing Chapter 26
Isometric Drawing Chapter 26 Sacramento City College EDT 310 EDT 310 - Chapter 26 - Isometric Drawing 1 Drawing Types Pictorial Drawing types: Perspective Orthographic Isometric Oblique Pictorial - like
CHAPTER 01 PRESENTATION OF TECHNICAL DRAWING. Prepared by: Sio Sreymean
CHAPTER 01 PRESENTATION OF TECHNICAL DRAWING Prepared by: Sio Sreymean 2015-2016 Why do we need to study this subject? Effectiveness of Graphics Language 1. Try to write a description of this object. 2.
2. Line composed of closely and evenly spaced short dashes in a drawing represents
1. Hidden lines are drawn as (a) dashed narrow lines (b) dashed wide lines (c) long-dashed dotted wide line (d) long-dashed double dotted wide line Ans: (a) 2. Line composed of closely and evenly spaced
Engineering Working Drawings Basics
Engineering Working Drawings Basics Engineering graphics is an effective way of communicating technical ideas and it is an essential tool in engineering design where most of the design process is graphically
Lecture 6 ( ): Theory of Multi-view Orthographic Projections
Lecture 6 (06.08.12): Theory of Multi-view Orthographic Projections Dr. Sharad Gokhale Civil Engineering Department, IIT Guwahati 208, M-Block, Academic Complex Email: sharadbg@iitg.ernet.in Telephone
ENGINEERING GRAPHICS ESSENTIALS. (A Text and Lecture Aid) Second Edition. Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS
ENGINEERING GRAPHICS ESSENTIALS (A Text and Lecture Aid) Second Edition Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com
Auxiliary view KCEC1101
Auxiliary view KCEC1101 Introduction There are times when one of the six principal views will not completely describe an object. This is especially true when there are inclined or oblique planes or features
ENGINEERING DRAWING LECTURE 4
ENGINEERING DRAWING LECTURE 4 Conventions Convention or Code: The representation of any matter by some sign or mark on the drawing is known as convention or code. The convention make the drawing simple
ME 113 Computer Aided Engineering Drawing
ME 113 Computer Aided Engineering Drawing Orthographic Projection - Visualizing Solids and Multiview Drawings Asst.Prof.Dr.Turgut AKYÜREK Çankaya University, Ankara Visualizing Solids and Multiview Drawings
Chapter 2: Dimensioning Basic Topics Advanced Topics Exercises
Chapter 2: Dimensioning Basic Topics Advanced Topics Exercises Dimensioning: Basic Topics Summary 2-1) Detailed Drawings 2-2) Learning to Dimension 2-3) Dimension Appearance and Techniques. 2-4) Dimensioning
Engineering Graphics Essentials with AutoCAD 2015 Instruction
Kirstie Plantenberg Engineering Graphics Essentials with AutoCAD 2015 Instruction Text and Video Instruction Multimedia Disc SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com
Alphabet of Lines Chapter 3
Alphabet of Lines Chapter 3 Sacramento City College EDT 300/ ENGR 306 EDT 300/306 - Basic Technical Drafting 1 Alphabet of Lines The design industry has agreed on a set of standard lines that are used
ENGINEERING GRAPHICS ESSENTIALS
ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive
Engineering Graphics, Class 13 Descriptive Geometry. Mohammad I. Kilani. Mechanical Engineering Department University of Jordan
Engineering Graphics, Class 13 Descriptive Geometry Mohammad I. Kilani Mechanical Engineering Department University of Jordan Projecting a line into other views Given the front and right side projections
Chapter 1 Overview of an Engineering Drawing
Chapter 1 Overview of an Engineering Drawing TOPICS Graphics language Engineering drawing Projection methods Orthographic projection Drawing standards TOPICS Traditional Drawing Tools Lettering Freehand
technical drawing
technical drawing school of art, design and architecture nust spring 2011 http://www.youtube.com/watch?v=q6mk9hpxwvo http://www.youtube.com/watch?v=bnu2gb7w4qs Objective abstraction - axonometric view
Study Unit. Auxiliary Views. This sneak preview of your study material has been prepared in advance of the book's actual online release.
Study Unit Auxiliary Views This sneak preview of your study material has been prepared in advance of the book's actual online release. iii Preview You re entering now into another subject area in your
Principles and Practice
Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2011 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation
Orthographic Drawing (Architectural Board Drafting)
Design and Drafting Description In this activity, the teacher will introduce orthographic projection, in which a multi-view drawing shows how the sides of an object are related to each another. Students
MODELING AND DESIGN C H A P T E R F O U R
MODELING AND DESIGN C H A P T E R F O U R OBJECTIVES 1. Identify and specify basic geometric elements and primitive shapes. 2. Select a 2D profile that best describes the shape of an object. 3. Identify
DFTG-1305 Technical Drafting Prof. Francis Ha
DFTG-1305 Technical Drafting Prof. Francis Ha Session 4 Orthographic Projection (or Multiview Projection) Reading: Geisecke s textbook: 14 th Ed. Chapter 5 p.162 15 th Ed. Chapter 6 p.232 Update: 18-0205
2009 Academic Challenge
2009 Academic Challenge ENGINEERING GRAPHICS TEST SECTIONAL This Test Consists of 50 Questions Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Leader Kevin Devine,
Isometric Drawings. Figure A 1
A Isometric Drawings ISOMETRIC BASICS Isometric drawings are a means of drawing an object in picture form for better clarifying the object s appearance. These types of drawings resemble a picture of an
Philadelphia University Faculty of Engineering Mechanical Engineering Department
Philadelphia University Faculty of Engineering Mechanical Engineering Department Basics of Engineering Drawing Manual Done by:- Eng. Laith R.I. Batarseh Eng. Hanan Khamis 2017 1 Table of contents SUBJECT
Fundamentals of Drafting - Orthographic Projection with Hidden Details
Fundamentals of Drafting - Orthographic Projection with Hidden Details Objectives: 1. To extend the principle of orthographic projection for hidden details. 2. To illustrate the representation of hidden
Glass Box Projection. Gives you 6 sides to view of an object. 10/2/14 2
2D Drawings Glass Box Projection Gives you 6 sides to view of an object. 10/2/14 2 We can simplify this for some objects to 3 views Glass Box Approach Glass Box Approach Glass Box Approach Glass Box Approach
Trade of Metal Fabrication. Module 6: Fabrication Drawing Unit 13: Parallel Line Development Phase 2
Trade of Metal Fabrication Module 6: Fabrication Drawing Unit 13: Parallel Line Development Phase 2 Table of Contents List of Figures... 4 List of Tables... 5 Document Release History... 6 Module 6 Fabrication
Mechanical Drawing. Unit 2 Study Guide for Chapters 6-10
Mechanical Drawing Unit 2 Study Guide for Chapters 6-10 Chapter 6 Multiview Drawing Section 6.1 Understanding Orthographic Projection A. Technical Drawing: How can a technical drawing give more accurate
Guide To British Standards
Guide To British Standards Higher Graphic Communication C O N T E N T S page TITLE BLOCK 2 DRAWING SCALES 2 LINE TYPES 3 ORTHOGRAPHIC PROJECTION 4 SECTIONAL VIEWS 4 SCREW THREADS & COMPONENTS 7 INTERUPTTED
3. The dimensioning SYMBOLS for arcs and circles should be given:
Draft Student Name: Teacher: District: Date: Wake County Test: 9_12 T and I IC61 - Drafting I Test 2 Description: 4.08 Dimensioning Form: 501 1. The MINIMUM amount of space between two, ADJACENT DIMENSION
Drawing sheet: - The various size of the drawing sheet used for engineering drawing as per IS Are listed in the table
Dronacharya Group of Institutions, Greater Noida Computer Aided Engineering Graphics (CAEG) (NCE 151/251) List of Drawing Sheets: 1. Letter writing & Dimensioning. 2. Projection of Points & Lines. 3. Projection
I B.TECH- I SEMESTER DEPARTMENT OF MECHANICAL ENGINEERING ENGINEERING DRAWING
I B.TECH- I SEMESTER DEPARTMENT OF MECHANICAL ENGINEERING ENGINEERING DRAWING ENGINEERING DRAWING UNIT-V DEFINITIONS: Axonometric Trimetric Dimetric Isometric It is a parallel technique used to create
ENGINEERING GRAPHICS 1.0 Introduction Engineering Graphics Drawing as an art Artist Graphic design Engineering graphics engineering drawing
ENGINEERING GRAPHICS 1.0 Introduction Engineering is the profession in which the knowledge of mathematics and science gained by study, experience and practice is applied with good judgment to develop a
2004 Academic Challenge
2004 Academic Challenge ENGINEERING GRAPHICS TEST - REGIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator Kevin Devine, Illinois State University
GOVERNMENT POLYTECHNIC, VALSAD MECHANICAL ENGINEERING DEPARTMENT ASSIGNMENT SUB: MECHANICAL DRAFTING (C321901) TERM:172
GOVERNMENT POLYTECHNIC, VALSAD MECHANICAL ENGINEERING DEPARTMENT ASSIGNMENT SUB: MECHANICAL DRAFTING (C321901) TERM:172 1) When all the dimension are placed above the dimension line, it is called (a) Aligned
ENGINEERING GRAPHICS UNIT V ISOMETRIC PROJECTION PERSPECTIVE PROJECTION
ENGINEERING GRAPHICS UNIT V ISOMETRIC PROJECTION PERSPECTIVE PROJECTION 1.PICTORIAL PROJECTIONS To visualize the shape of the whole object in its 3- D form, all the two or three orthographic views of the
DELHI TECHNOLOGICAL UNIVERSITY ENGINEERING GRAPHICS LAB MANUAL
DELHI TECHNOLOGICAL UNIVERSITY ENGINEERING GRAPHICS LAB MANUAL NAME: - ROLL NO: - GROUP: - BRANCH: - GROUP TEACHER: Page 1 www.rooplalrana.com 1 GENERAL INSTRUCTIONS FOR ENGG. GRAPHICS LAB 1) Students
Question. Question. Product Features The Vocabulary of Design Download from web site. CAD/Fab Orthographic Projection 4
Orthographic Projection Question What is the name of the feature indicated? A. Countersink B. Counterbore C. Spotface D. Hole E. Stepped hole CAD/Fab Assemblies & Mobility 2 Question Product Features The
Orthographic Drawings
Orthographic Drawings You don t have to be an artist to draw great furniture plans. By Craig Bentzley W oodworking requires a graphic language to convey building information. We can t do it without drawings
TECHNICAL DESIGN I (540)
DESCRIPTION The first assessment in a series, Technical Design I prepares students to develop technical knowledge and skills required to plan and prepare scale pictorial interpretations of engineering
Contents. Notes on the use of this publication
Contents Preface xxiii Scope Notes on the use of this publication xxv xxvi 1 Layout of drawings 1 1.1 General 1 1.2 Drawing sheets 1 1.3 Title block 2 1.4 Borders and frames 2 1.5 Drawing formats 2 1.6
Unit 4: Geometric Construction (Chapter4: Geometry For Modeling and Design)
Unit 4: Geometric Construction (Chapter4: Geometry For Modeling and Design) DFTG-1305 Technical Drafting Instructor: Jimmy Nhan OBJECTIVES 1. Identify and specify basic geometric elements and primitive
DWG 002. Blueprint Reading. Geometric Terminology Orthographic Projection. Instructor Guide
DWG 002 Blueprint Reading Geometric Terminology Orthographic Projection Instructor Guide Introduction Module Purpose The purpose of the Blueprint Reading modules is to introduce students to production
AutoCAD Tutor 2011 Support Docs
AutoCAD Tutor 2011 Support Docs CHAPTER 1 CUSTOMIZING THE QUICK ACCESS TOOLBAR One of the advantages of the Quick Access Toolbar is the ability to display the AutoCAD commands that you frequently use.
A Concise Introduction to Engineering Graphics
A Concise Introduction to Engineering Graphics Fourth Edition Including Worksheet Series A Timothy J. Sexton, Professor Department of Industrial Technology Ohio University BONUS Book on CD: TECHNICAL GRAPHICS
1 st Subject: 2D Geometric Shape Construction and Division
Joint Beginning and Intermediate Engineering Graphics 2 nd Week 1st Meeting Lecture Notes Instructor: Edward N. Locke Topic: Geometric Construction 1 st Subject: 2D Geometric Shape Construction and Division
Engineering Graphics. Class 2 Drafting Instruments Mohammad Kilani
Engineering Graphics Class 2 Drafting Instruments Mohammad Kilani Drafting Instruments A Design is as good as its instruments A engineering drawing is a highly stylized graphic representation of an idea.
Student Name: Teacher: Date: District: Rowan. Assessment: 9_12 T and I IC61 - Drafting I Test 2. Description: Drafting 1 - Test 6.
Student Name: Teacher: Date: District: Rowan Assessment: 9_12 T and I IC61 - Drafting I Test 2 Description: Drafting 1 - Test 6 Form: 501 1. 2X on a hole note means: A. Double the size of the hole. B.
Sketching Fundamentals
Sketching Fundamentals Learning Outcome When you complete this module you will be able to: Make basic engineering sketches of plant equipment. Learning Objectives Here is what you will be able to do when
Fundamentals for building Drawing
Fundamentals for building Drawing What is Drawing Introduction Knowledge of preparing and understanding drawing will prove to be an invaluable aid while performing their jobs effectively, efficiently.
Module 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece
Inventor (10) Module 1H: 1H- 1 Module 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece In this Module, we will learn how to create an ellipse-based cylindrical sheetmetal lateral piece
2003 Academic Challenge
Worldwide Youth in Science and Engineering 2003 Academic Challenge ENGINEERING GRAPHICS TEST - REGIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator
UNIT I PLANE CURVES AND FREE HAND SKETCHING CONIC SECTIONS
UNIT I PLANE CURVES AND FREE HAND SKETCHING CONIC SECTIONS Definition: The sections obtained by the intersection of a right circular cone by a cutting plane in different positions are called conic sections
Vocabulary. Cavalier oblique: An oblique drawing in which the depth axis lines are drawn at full scale (full size).
10-11-11 Vocabulary Cavalier oblique: An oblique drawing in which the depth axis lines are drawn at full scale (full size). 10-12-11 Vocabulary Centerlines: Thin lines made up of long and short dashes
Understanding Projection Systems
Understanding Projection Systems A Point: A point has no dimensions, a theoretical location that has neither length, width nor height. A point shows an exact location in space. It is important to understand
Bridge Course On Engineering Drawing for Mechanical Engineers
G. PULLAIAH COLLEGE OF ENGINEERING AND TECHNOLOGY Accredited by NAAC with A Grade of UGC, Approved by AICTE, New Delhi Permanently Affiliated to JNTUA, Ananthapuramu (Recognized by UGC under 2(f) and 12(B)
1 ISOMETRIC PROJECTION SECTION I: INTRODUCTION TO ISOMETRIC PROJECTION
1 ISOMETRIC PROJECTION SECTION I: INTRODUCTION TO ISOMETRIC PROJECTION Orthographic projection shows drawings of an object in a two-dimensional format, with views given in plan, elevation and end elevation