ALVIN Home Planning & Layout Contains lavatory and kitchen fixtures, and door swings. Scale: ¼" = 1'. Size: 5½" x 7" x.030". No. TD1150 SRP $6.
|
|
- Cuthbert Charles
- 5 years ago
- Views:
Transcription
1 70 Custom Design Templates Available Manufactured to individual design specifications to reduce or eliminate costly repetitive drafting time. Incorporating a logo and/or any special design into a custom template is not only functional but can also serve as a highly effective promotional tool. Custom templates are individually milled for accuracy and checked to precision standards. To obtain a price quotation, please provide the following: Number of pieces required (minimum order: 144 pieces/design) Thickness and color of material (if other than the standard.030" green tint) Sketch or drawing of the template, clearly showing areas to be cut and any printing desired. Complete camera-ready art is required for production, or artwork can be created for an additional charge. CBA Architectural Contains circles, door swings, kitchen and lavatory fixtures, and roof pitch index. Scale: 1/8" = 1'. Size: 3¾" x 6¼" x.030". No. 33R SRP $20.40 ea 3/16" Scale House Plan Contains circles, squares, house plan, plumbing symbols, stair planner, and roof pitch gauge. Scale: 3/16" = 1'. Size: 5" x 9¾". No. 316T Architectural Contains door swings, kitchen and lavatory fixtures, ANSI symbols, circles, floor elevation indicator, and roof pitch index. Scale: 1/4"= 1'. Size: 4½" x 9s" x.030". No. TD1538 SRP $8.00 ea Same as No. TD1538, but in half size. Scale: 1/8" = 1'. Size: 3¼" x 5½" x.030". No. TD226 SRP $11.75 ea Similar to No. TD1538. Size: 4a" x 9½" x.030". No. 22R Same as No. 22R, but in half size. Scale: 1/8" = 1'. Size: 3¼" x 5½" x.030". No. 22RA SRP $17.05 ea Same as No. 22R, but in ½" scale. Size: 12" x 12" x.030". Architects & Builders Contains circles, rectangles, lavatory and kitchen fixtures, roof pitch index, tile layout gauge, door swings, floor elevation indicator, and electrical symbols. Scale: 1/4" = 1'. Size: 58" x 9¼" x.030". No. TD1151 SRP $10.75 ea PICKETT Similar to No. TD1151 with built-in risers. Scale: 1/4" = 1'. Size: 4a" x 9½" x.030". No. 1151I PICKETT Similar to No. TD1151 but half size. Scale: 1/8" = 1'. Size: 4" x 8" x.030". No. 1152I Architectural Detailer Contains commonly used symbols for architectural drawings. Scale: 1/4" = 1'. Size: 8" x 6¼" x.030". Home Planning & Layout Contains lavatory and kitchen fixtures, and door swings. Scale: ¼" = 1'. Size: 5½" x 7" x.030". No. TD1150 SRP $6.50 ea PICKETT House Plan & Plumbing Similar to No. TD1150 with built-in risers. Scale: 1/4" = 1". Size: 4a" x 9½" x.030". No. 1150I SRP $14.05 ea House Plan Contains stairs, doors, plumbing fixtures, kitchen equipment, appliances, and roof pitch gauge. Scale: 1/4" = 1'. Size: 5¼" x 6d" x.020". No. 30T SRP $5.85 ea Kitchen/Bathroom Planner Contains door swings, plumbing fixtures, cabinets, and electrical symbols. Scale: ½" = 1'. Size: 6¼" x 9¾" x.020". No. 33T Plumbing Fixtures Plan Contains standard lavatory symbols in 1/4", 1/8", and 1/16" scale. Size: 9d" x 5d". No. 26R SRP $15.85 ea No. 22RB SRP $42.20 ea No. 24R SRP $17.05 ea Plumbing Fixtures Contains baths, shower stalls, lavatories, and sinks. Scales: 1/4" and 1/8" = 1'. Size: 58" x 9¾" x.030". Professional Planner Contains roof pitch gauge, door swings, electrical symbols, and lavatory fixtures. Scale: 1/8" = 1'. Size: 5¼" x 9¾" x.020". Professional House Plan Contains circles, door swings, kitchen and lavatory fixtures, and tile layout indicator. Scale: 1/4" = 1'. Size: 5¼" x 9¾" x.020". No. TD1190 SRP $12.75 ea Plumbing Plan Views Similar to No. TD1190. Size: 5½" x 9¾" x.020". House Plan & Plumbing Contains door swings, plumbing and light fixtures, kitchen equipment, and roof pitch gauge. Scale: 1/4" = 1'. Size: 58" x 7" x.030". No. 55T No. 35T No. 36T No. TD444 SRP $8.95 ea
2 71 Architectural (cont.) Kitchen Layout Contains kitchen essentials: sinks, appliances, corner cabinets. One edge graduated 1/2" scale; other edge 1/4" scale. Size: 10¾" x 2¼" x.030". No. TD10 SRP $11.95 ea Plumbing Plan Views Contains American Standard lavatory and institutional fixtures in 1/16", 1/8", and 1/4" scales. Size: 5d" x 9¾" x.020". No. 9383TA Bathroom Plumbing Features toilets, tubs, urinals, and lavatories in 1/2" scale. Size: 6¼" x 9d". No. 39T Landscape Design Contains various symbols for landscape design. Scale: 1/4" = 1'. Size: 7" x 8¼" x.030". No. TD1178 SRP $13.00 ea PICKETT Landscape Similar to No. TD1178 with built-in risers. Scale: 1/4" = 1'. Size: 8" x 10" x.030". Expanded House Plan Features plumbing fixtures, kitchen appliance, door and electric symbols, and roof pitch gauge. Scale: 1/4" = 1'. Size: 6¼" x 9d" No. 32T Kitchen & Cabinet Design Contains counter and corner elevations, appliances, sinks, and bowls. Scale: 1/2" = 1'. Size: 9d" x 9d" x.030". Plumbing Plan Views Contains American Standard lavatory fixtures in 1/8" and 1/4" scales. Size: 5d" x 9¾" x.020". No. 9383TA2 Survey Special Contains survey symbols, triangles, hexes, squares, arrows, and parallel lines. Scale: 1" = 20' and 40'. Size: 4z" x 7s". No. 444T SRP $6.10 ea Sheet Metal Conduit Contains cross-sections for heating and air conditioning layout. Scale: 1/4" = 1'. Size: 5" x 9¾" x.030". No. 48R SRP $27.05 ea Survey & Civil Engineer Contains standard symbols and users legend. Size: 4" x 6½" x.030". No. TD654 SRP $10.00 ea No. 1178I SRP $21.15 ea Landscape Design Contains various symbols for landscape design. Scale: ¼" = 1'. Size: 78" x 11d" x.030". No. TD5351 SRP $13.00 ea Landscape Design Same as No. TD5351 in 1/8" scale. Size: 3½" x 6" x.030". No. TD5361 SRP $7.50 ea No. TD253 SRP $14.25 ea Lighting Fixtures Contains basic lighting fixtures used in the construction industry. Scales: 1/8" and 1/4" = 1'. Size: 5¼" x 7¼" x.030". No. 327R SRP $14.95 ea Plumbing Elevation Views Contains American Standard lavatory and institutional fixtures in 1/8", 1/4", 3/8", and 1/2" scales. Size: 5d" x 9¾" x.020". Telephone Symbols Contains most commonly used symbology for telephone system layout. Size: 10" x 5¾" x.030". No. 100R SRP $14.80 ea Plumbing Elevation Views Contains lavatory fixtures in front and side elevated views in 1/8", 1/4", and 1/2" scales. Size: 5½" x 9¾" x.020". Landscape Design Contains various symbols for landscape design. Scale: 1/4" = 1'. Size: 5" x 88" x.030". No. 715R SRP $23.65 ea Yardscaper Landscapes Symbols for planning yards and gardens. Scale: 1/4" = 1'. Size: 6a" x 9¾" x.020". No. 31T Yardscaper Landscapes Similar to 31T in 1/8" scale. Interior Design Tables & Chairs Contains large dining room table sizes. Scale: 1/4" = 1'. Size: 11" x 8½" x.030". No. 717R SRP $27.05 ea Interior Design Kitchen, Bathroom & Bedroom For planning interior design of kitchen, laundry, bathroom, and bedroom. Scale: 1/4" = 1'. Size: 11" x 8½" x.020". No. 9383TB No. 37T No. 31TP No. 716R SRP $26.70 ea
3 72 Architectural (cont.) House Furnishings Contains furniture pieces for living and dining rooms, den, library, bedroom, and kitchen. Scale: 1/4" = 1'. Size: 5s" x 8s" x.030". No. TD714 SRP $12.00 ea House Furnishings Similar to No. TD714. Scale: 1/4" = 1'. Size: 3¾" x 4¾" x.030". House Furniture Assorted furniture and decor symbols: beds, chairs, tables, lamps, dressers, cabinets, etc. 1/4" scale. Size: 10" x 5d" x.030". No. TD7151 SRP $9.99 ea Office Planner Contains desks, credenzas, files, bookcases, tables, and chairs. Scale: 1/4" = 1'. Size: 10¼" x 6½" x.030". No. 707R SRP $20.40 ea Flowplan Contains valves and operators 1/4" and 3/16" long. Two-part symbols are drawn by sliding the template. Instruction sheet shows complete valve symbols. Size: 5s" x 9¾" x.020". No. 59T SRP $10.00 ea No. 714R SRP $18.85 ea House Furnishings Similar to No. TD714. Scale: 1/8" = 1'. Size: 6" x 3½" x.030". No. 714RA SRP $17.05 ea Interior Design Living Room & Dining Room Contains sofas, curved and angular pieces, wall units, and desks. Scale: 1/4" = 1'. Size: 11" x 8½" x.030". Banquet, Seminar, & Conference Planner For planning banquet, seminar, or conference room layouts. Scale: 1/8" = 1'. Size: 68" x 48" x.030". Flow Contains standard symbols used for pipe and plumbing layout. Size: 2¾" x 108" x.030". No. 42R Home Furnishings Contains dimensioned furniture for kitchen, dining room, bedroom, and living room. Scale: 1/4" = 1'. Size: 5¾" x 10" x.030". No. TD1155 SRP $10.95 ea PICKETT Home Furnishings Similar to No. TD1155 with built-in risers. Scale: 1/4" = 1' Size: 5½" x 9¼" x.030". No. 1155I Heating & Air Conditioning Contains commonly used symbols for heat and air conditioning applications. Size: 5" x 7" x.030". No. 41R SRP $20.40 ea No. 718R SRP $27.05 ea Interior Design Kitchen, Bed & Bath Contains cabinets, appliances, beds, dressers, etc. Scale: 1/4" = 1'. Size: 8½" x 11" x.030". No. TD7161 SRP $20.00 ea 1/8" Scale Furniture Contains dining room, living room, kitchen, office area, and bedroom furnishings. Scale: 1/8" = 1'. Size: 5" x 9s". No. 133T No. 709R SRP $13.50 ea Banquet, Seminar, & Conference Planner Same symbols as No. 709R. Scale: 1/4" = 1'. Size: 12¼" x 8¼" x 030". No. 708R SRP $27.05 ea Screw Data Selector Slide chart design for determining sizes of various screws, threads, drills, holes, etc. Size: 5" x 10". No SRP $21.45 ea Mechanical Bolts & Nuts Contains hexagons, circles, and squares. Size: 5" x 7s" x.030". No. 57R SRP $21.10 ea Fluid Power Contains symbols for fluid power diagrams derived from ANSI Y Size: 4½" x 7" x.030". No. 46R SRP $22.50 ea PICKETT House Furniture Indicator Contains standard furniture cutouts. With built-in risers. Scale: 1/4" = 1'. Size: 5d" x 10" x.020". Furniture Contains living room, dining room, bedroom, and office area furnishings. Scale: 1/4" = 1'. Size: 6¼" x 9d" x.020". Welding Contains standard welding symbols. Size: 3½" x 6" x.030". Ferrous Flanged Valves Contains check valves, elbows, flange diameters, and gates. Scale: 3/8" = 1'. Size: 5a" x 6½" x.030". No. 111PI SRP $18.05 ea No. 132T No. 34R SRP $12.80 ea No. 88R SRP $18.90 ea
4 73 Dimensioning & Tolerance Contains symbols proportioned to 1/8" character height. Size: 2¾" x 7" x.030". No. 52R SRP $17.95 ea Pipe Fitting Contains symbols for pipe, end bell, flange, and fittings in seven sizes. Size: 5" x 8" x.030". No. 49R SRP $20.20 ea Instrument Symbols Contains commonly used instrument symbols. Size: 5" x 8" x.030". No. 47R SRP $19.75 ea Mechanical (cont.) Isometic Piping Contains valves, flanges, elbows, reducers, pumps, and caps. Size: 8½" x 5¼" x.030". No. TD1143 SRP $14.90 ea Isometric Piping Similar to TD1143 Size: 5x" x 8½" x.030". No. 43R SRP $18.85 ea Process Flow Planner Contains commonly used symbols such as data flags, pumps, jets, flow nozzles, vessel heads, etc. Size: 7n" x 4s" x.030". No. 39R SRP $19.75 ea Flowplanner Template Set For the petroleum and organic chemical industries. Includes symbols for flowplans and field reports. Set of 2, each one is: 4a" x 6d'. No. 60T SRP $12.80 st Electric/Electronic Electrical/Electronic Set of 3 Contains a comprehensive set of three templates conforming to ANSI Y32.2. Size: 7¾" x 5" x.030"; 8" x 4a" x.030"; 8" x 3¾" x.030". No. 300R SRP $63.90 st Electric/Electronic Symbols Size: 7¾" x 5" x.030". No. 301R SRP $26.85 ea Electrical/Electronic Contains standard symbols used for schematic diagrams. Size: 5¼" x 8¼" x.030". No. TD1515 SRP $14.75 ea Electrical Controls Contains standard symbols used in machinery and automation circuits. Size: 3¾" x 8" x.030". No. TD1312 SRP $10.25 ea Electrical Controls Similar to No. TD1312. Size: 3¼" x 8" x.030". No. 312R SRP $23.40 ea Electric Public Utilities Contains coils, connectors, contacts, instruments, and transformers. Size: 3¼" x 6" x.030". No. 45R Chemical Ring Contains pentagons, hexagons, heptagons, and octagons. Size: 5" x 6d" x.040". No. 83R SRP $24.05 ea Process For flow sheet diagrams in the chemical, foods, petroleum, plastics, and allied industries. Size: 5" x 8x" x.030". Electric/Electronic Contains electronic tubes, capacitors, circuit breakers, resistors, relays, switches, logic symbols, etc. Designed for.200" grid. Size: 5" x 7" x.030". Electrical/Electronic Contains transformers, resistors, capacitors, etc. Designed for.250" grid. Size: 5" x 8¼" x.060". Electromaster Contains electrical and other symbols used in the utility and power and light industries. Size: 8" x 8" x 11½" x.040". No. 44R SRP $21.95 ea No. TD1279 SRP $12.75 ea No. 315R SRP $22.50 ea No. 375R SRP $32.35 ea
5 74 Electric/Electronic (cont.) Power and Light Contains standard equipment symbols. Size: 5½" x 7½" x.030". No. 62R SRP $21.95 ea Small Circle Guide Contains 39 circles from 1 16" to 1a". Size: 4¼" x 7¼" x.030". No. TD1200 SRP $10.00 ea Circle Template Precision die-cut, metric, fractional, and decimal equivalent dimensions, and marked corner radii. Contains 13 circles from 1¼" to 3½". Size: 8a" x 11½" x.025". No. 404T SRP $9.00 ea Circle Template Precision die-cut, metric, fractional, and decimal equivalent dimensions, and marked corner radii. Contains 45 circles from 1/16" to 3". Size: 7a" x 9¼" x.020". No. 105T SRP $6.90 ea Circuit Aid Contains a selection of standard cutouts which in combination create most electric/ electronic symbols. Size: 4½" x 7¾" x.020". No. 61T SRP $9.25 ea Flow Chart/Logic PICKETT Similar to No. TD1200 with built-in risers. Size: 4" x 7¼" x.030". No. 1200I SRP $12.95 ea Contains 39 circles from 1/16" to 1s". Size: 4¾" x 8" x.020". No. 85T SRP $3.75 ea Circle Master Contains 45 circles from 1/16" to 2¼". Size: 7¼" x 8¼" x.030". No. TD1204 SRP $7.95 ea PICKETT Flow Chart Symbols Contains basic program systems flow charting symbols. Size: 4" x 10" x.030". No. 1292I SRP $13.65 ea Electro/Logic Contains various sizes of gate and inverter symbols with selected combination of electronic symbols. Size: 5¾" x 3¾" x.030". No. 308R SRP $21.35 ea Circle Guide Contains 46 circles from 1/16" to 2¾". Size: 8s" x 118" x.030". No. TD4000 SRP $14.00 ea Similar to No. TD1200. Size: 3d" x 7¼" x.030". No. 40R SRP $11.10 ea Jumbo Circle Guide Contains 12 circles, 1¼" to 3½". Size: 9" x 11s" x.030". No. TD495 SRP $13.75 ea Extra Large Similar to No. TD495. Size: 8¾" x 11" x.030". No. 440R SRP $13.50 ea Large Similar to No. TD1204. Size: 7¼" x 8¼" x.030". No. 140R SRP $14.65 ea Contains 42 circles from 1/32" to 2¼". Size: 6¼" x 9¾" x.020". No. 88T SRP $5.85 ea Computer Flow Chart Contains standard symbols. Size: 6x" x 9¾" x.025". Circle Guide Set of 3 Contains 98 circles on three templates (Nos. TD435, TD445, and TD495). Size range from 1/32" to 3½". Size: 8½" x 11" x.030" each. Full & Equal Spacer Contains six large circles, 2a" to 3". Size: 6½" x 10½" x.020". Circle Master Contains 44 circles from 1/16" to 3". Size: 7" x 9¼" x.030". No. 77T No. TD404 SRP $31.39 st No. 87T SRP $6.10 ea No. TD445 SRP $12.95 ea
6 75 (cont.) Senior Circle Guide Contains 42 circles from 1/32" to 2". Size: 5" x 8" x.030". No. TD435 Circle Template Contains 36 circles from 1/32" to 18". Size: 3d" x 7¾" x.030". No. 81T SRP $4.00 ea Junior Circle Guide Contains 37 circles from 1/32" to 1". Size: 2¾" x 8¼" x.030". PICKETT Small Contains 85 circles from 1/32" to 1¼". Size: 8" x 10" x.030". No. 1203I Ellipses PICKETT Four-In-One Ellipses Contains 74 ellipses in projections of 15, 30, 45, and 60. Major axes of 5/16" to 2¼". Size: 8¾" x 12" x.030". No. 1262I SRP $23.55 ea No. TD425 SRP $8.25 ea Large Contains 11 large circles from 1½" to 3½". Size: 8½" x 11" x.030". No. TD1201 SRP $11.50 ea PICKETT Similar to No. TD1201. Size: 4" x 7¼" x.030". No. 1201I SRP $14.05 ea Civil Engineer Radius Guide A tool for drawing 26 circles, with an additional 12 radii for center locating. Three scales: 1" = 20', 50', 100'. Size: 7½" x 9½" x.060". Small Ellipse Guide Contains 79 ellipses in projections of 15, 30, 45, and 60, 15 from 3/16" to 1s", 30 from 1/8" to 1½", 45 from 1/8" to 1¾", and 60 from 1/8" to 1s". Size: 8½" x 11" x.030". No. TD333 SRP $14.95 ea PICKETT Combination Ellipse Master Contains four projections of 15, 30, 45, and 60. Size range from 1/8" to 1¾". Size: 8n" x 12" x.030". No. 1269I SRP $21.15 ea No. 127R SRP $27.35 ea Circle Template Precision die-cut, metric, fractional, and decimal equivalent dimensions, and marked corner radii. Contains 45 circles from 1/16" to 2¼". Size: 7a" x 8a" x.025". No. 104T SRP $6.90 ea Circle Radius Master Contains 54 circle and radii cutouts for drawing circles from 3/64" to 7½" diameter. Size: 7½" x 10" x.030". Combination Ellipse Master Similar to No. TD333. Size: 8½" x 11" x.030". No. 479R SRP $24.05 ea Professional Ellipse Set of 10 Contains 10 projections from 15 to 60 in increments of 5. Major axes of 3/8" to 2½". Size: 6" x 10" x.020". No. 92TA SRP $52.75 st No. TD1202 SRP $12.25 ea PICKETT Circle Radius Master Similar to No. TD1202. Size: 7v" x 9d" x.060". Ellipse Master Contains 60 ellipses in four projections of 25, 35, 45, and 60. Size range from 1/4" to 1a". Size: 5" x 10¼" x.030". PICKETT Circle Master Template Contains 43 circles ranging from 1/16" to 3" in diameter. Size: 7" x 10" x.030". No. 1202I SRP $16.45 ea Circle Radius Master Similar to No. TD1202. Size: 7½" x 10a" x.030". No. 77R SRP $18.70 ea Ellipse Master Same as No. 77R in 20, 30, 40, and 50 projections. Size: 5" x 10¼" x.030". Ellipse Set of 10 Contains projections from 15 to 60 in increments of 5. Major axes of 1/4" to 2". Size: 5" x 9d" x.030". No. 1204I SRP $14.05 ea No. 142R SRP $17.95 ea No. 78R SRP $18.70 ea No. 70R SRP $ st
7 76 Ellipses (cont.) PICKETT Master Contains 60 ellipses in four projections of 25, 35, 45, and 60. Size range from 1/4" to 1½". Size: 5" x 11" x.030". Big Ellipse Set of 4 Contains 60 ellipses in four projections of 15, 30, 45, and 60. Major axes of 1¼" to 6½". Size: 4½" x 8" x.020". No. 120T SRP $28.75 st Large Isometric Guide Contains 12 ellipses from 28" to 4". Size: 9s" x 19¾" x.020". No SRP $21.50 ea No. 1266I Ellipse Set of 5 Contains 13 projections from 10 through 90. Major axes of 7/16" to 1¾", 195 ellipses. Size: 6¼" x 10" x.020". Large Contains 12 isometric ellipses with axes from 1½" to 2" in increments of 1/8" and from 2" to 7" increments of 1/4". Size: 6" x 9d" x.030". No. TD1124 SRP $15.00 ea Large Similar to TD1124. Size: 6z" x 9d" x.030". No. 124R SRP $25.99 ea Contains 35 ellipses from 1/16" to 2½". Size: 6¼" x 9d" x.020". No. 97T Contains 38 ellipses of 35, 16 from 1/8" to 1b". Size: 6s" x 11¼" x.030". No. 123R SRP $18.95 ea No. 95TA SRP $28.75 st Contains 40 ellipses from 3/32" to 1b". Size: 6½" x 10½" x.020". No. 94T Isometric Ellipse Guide Contains 27 ellipses from 1/8" to 2". Size: 68" x 10" x.030". No. TD400 SRP $8.00 ea Contains 39 ellipses from 1/8" to 1¾". Size: 11a" x 11a" x.025". No. TD868 SRP $9.00 ea Even Ellipse Master Contains 78 ellipses in five projections of 20, 30, 40, 50, and 60. Size range from 1/4" to 1½". Size: 6½" x 11" x.030". No. TD1267 SRP $11.75 ea PICKETT Contains 27 ellipses from 1/8" to 2". Size: 5d" x 10" x.030". No. 1264I Extra Large Series Ellipse Set of 12 Contains 12 templates from 5 through 60. Use for drawing ellipses from 4" to 10". 5, 10, 15, 20, 25, 30, 35, 40, and 45 templates have 12 cutouts and progress from 4" to 10" in 1/2" increments. 50, 55, and 60 templates have 10 cutouts each and progress from 4" to 9" in 1/2" increments. No SRP $ st Ellipse Sets Ellipses from 10 through 80. No. Description SRP Small series, 5/32" to 2", cutouts Set of 15 $ st Set of st (15 through 60 ) Large series, 28" to 4", 12 cutouts Set of st Set of st (15 through 60 )
8 77 General Purpose General Purpose Contains circles, squares, hexagons, triangles, arrows, and rectangles. Size: 4d" x 68" x.030". No. TD422 PICKETT General Purpose Similar to No. TD422. Size: 5d" x 8" x.030". No. 1033I SRP $14.05 ea Master General Purpose Contains circles, squares, hexagons, triangles, arrows, rectangles, and brackets. Size range from 1/16" to 1". Size: 5½" x 10¼" x.030". No. 18R SRP $15.85 ea PICKETT Master General Purpose Similar to 18R. Size: 5¾" x 11" x.030". No. 1036I SRP $16.45 ea All Purpose Contains circles, squares, hexagons, triangles, ellipses, stars, rectangles, arrows, diamonds, a 3" protractor, and French curve. Size range from 1/16" to 1/2". Size: 3" x 68" x.030". No. TD116 SRP $10.50 ea All-Purpose Similar to TD116. Size: 3" x 68" x.030". No. 16R SRP $10.99 ea Small Shapes Contains circles, hexagons, triangles, squares, arrows, route symbols, brackets, and data block. Size: 2¼" x 5" x.020". This item can be imprinted. No. 41T SRP $1.60 ea Triangles & Diamonds Contains 30 triangles from 3/32" to 1a". Size: 4" x 7" x.030". No. 51R SRP $12.75 ea Multiple Curves Contains 10 sizes of two basic curves, 20 in all. Sizes are labeled. Size: 6a" x 9d" x.020". No. 455T General Purpose Contains many useful symbols, including circles, squares, hexagons, triangles, and rectangles. Size: 6½" x 4¾" x.030". No. 12R SRP $15.55 ea Rectangles Contains six flow arrows and 20 rectangles from 1/16" x 1/8" to 2a" x 4¾". Size: 6a" x 10a" x.020". No. 56T General Purpose Protractor Contains circles, squares, triangles, hexagons, star, curve, arrowheads, and protractor. Size range from 1/8" to 1". Size: 5½" x 9½" x.030". No. TD1034 SRP $8.50 ea Giant Small Shapes Contains: 177 cutouts in 17 shapes. Size range: 1/16" to 3/8". Size: 4d" x 9d" x.020". No. 141T General Purpose Contains circles, hexagons, triangles, squares, brackets, traffic, and mapping symbols. Size: 2¾" x 5¼" x.030". No. TD421 SRP $6.95 ea Squares Contains 39 squares from 1/16" x 1a". Size: 4" x 7½" x.030". No. 30R SRP $12.70 ea PICKETT Squares Contains 41 squares from 1/16" to 1½". Size: 5" x 9a" x.030". No. 1205I SRP $11.80 ea Pee-Wee General Purpose Contains circles, squares, hexagons, triangles, brackets, arrows, star, and ellipse. Standard symbols size range from 1/8" to 7/16". Size: 2½" x 4¾" x.020". No. 14R SRP $8.45 ea Rectangles & Enclosures Contains 65 rectangles from 1/16" x 1/8" to 1¼" x 2". Flow arrows and end shapes. Size: 6a"x 10a" x.020". No. 57T Squares Contains 40 squares from 1/16" to 2". Size: 6¼" x 9¾" x.020". No. 47T SRP $7.20 ea Geometric Designer Contains small sizes of common shapes used in design. Size: 4d" x 8" x.020". No. 49T SRP $4.25 ea
9 78 General Purpose (cont.) Pocket Pal Contains 1/32" to 1" circles, hexagons, triangles, squares. Size: 3½" x 58" x.030". No. 50R SRP $10.99 ea PICKETT Pocket Template Similar to No. 50R, ranging from 1/16" to 11/16". Size: 3½" x 5" x.030". No. 1085I SRP $10.65 ea Human Figure - Geriatric 12 cutouts representing four positions. Scales of 1:50, 1:25, and 1:20. Size: 8¼" x 7¼" x.030". No. TD55 SRP $13.00 ea Sketch Scale Pocket rule scaled in 10ths and 16ths. Contains cut-outs for making field sketches and related drawings. Size: 1¾" x 6½" x. 030". No. 20R SRP $9.85 ea Pocket Template Contains circles, triangles, hexagons, square, 5" protractor, and edge scale in 16ths. Size range from 1/16" to 1¼". Size: 3d" x 7½" x.020". No. 48T SRP $4.25 ea Sketch Master Contains hexagons, circles, squares, and triangles in 12 sizes. Size: 3½" x 5d" x.030". No. TD1135 SRP $9.50 ea Sketch Mate Similar to No. TD1135. Size: 3¼" x 5d" x.030". No. 19R SRP $14.80 ea Specialty Human Figure - Children 15 cutouts representing five ages/ positions. Scales of 1:50, 1:25, and 1:20. Size: 8¼" x 5¾" x.030". No. TD44 SRP $14.50 ea Human Figure - Male A unique silhouette template of the adult male figure with 9 riveted joints for creating many true-to-life positions. 1:5 scale. Size: 13a" x.030". No. TD1735A SRP $22.50 ea Human Figure - Male Same as No. TD1735A with 1:10 scale. Size: 6d" x.030". No. TD1735B SRP $17.75 ea Pocket Guide Contains circles, squares, triangles, and hexagons. Size: 2½" x 3d" x.030". No. TD411 SRP $7.75 ea Oil Field 71 cutouts of oil well drilling hardware symbols for piping schematics. Size: 11" x 8½" x.030". Female Human Figure Contains six sizes of standing female figures in silhouette. Four positions. Scales from 3/32" to 1/2" = 1'. Size: 5¾" x 88" x.030". No. TD33 SRP $11.75 ea Male Human Figure Contains six sizes of standing male figures in silhouette. Four positions. Scales from 3/32" to 1/2" = 1'. Size: 5¾" x 88" x.030". Human Figure - Female A unique silhouette template of the adult female figure with 9 riveted joints for creating many true-to-life positions. 1:5 scale. Size: 13a" x.030". No. TD1735AF SRP $22.25 ea Human Figure - Female Same as No. TD1735AF with 1:10 scale. Size: 6d" x.030". Arrows Contains arrows, north indicators, road signs, and two sizes of traffic markers. Size: 4" x 6" x.030". No. 53R Arrowheads Contains nine sizes each of five different arrow shapes. Size: 3s" x 6" x.030". No. TD10269 SRP $18.05 ea Gemstone Template Set of 2 Contains 278 sizes of marquise, triangle, square, heart, round, oval, pear, and rectangle shapes. Size range from 3mm to 15mm. Size: 6v" x 9d" x.020". No. TD22 SRP $9.95 ea No. TD1735BF SRP $19.00 ea No. TD302 SRP $7.85 ea No. 777TA SRP $14.90 st
10 79 Specialty (cont.) Accident Report Assorted symbols for on-site accident reporting. One edge includes 1/4" scale = 5'. Size: 4" x 2s" x.030". No. TD100 SRP $12.25 ea Accident Report Symbols Contains intersections, scales, and a wide variety of symbols for making neat, accurate reports. Size: 38" x 6s" x.020". No. 644T SRP $2.75 ea Metric Contains 78 metric circles from 1mm to 30mm. Size: 25cm x 16cm. No. 89TM Contains 44 ellipses in 35 16' projection. Size range from 1mm to 45mm. Size: 16cm x 25cm x.5mm. No. 97TM Metric Traffic Signing Contains standard traffic engineering symbols in 24", 36", and 48" scale. Size: 6" x 10a" x.030". No. 651R SRP $21.95 ea Metric Large Contains 44 circles from 2mm to 50mm. Size: 18.5cm x 21cm x.8mm. No. 2140R SRP $15.35 ea Metric Extra Large Contains 13 circles from 25mm to 85mm. Size: 22.2cm x 29.2cm x.8mm. No. 2440R SRP $14.95 ea Metric Sketch Mate Contains circles, hexagons, squares, and triangles. Size range from 3mm to 14mm. Size: 8.8cm x 16.2cm x.8mm. No. 2019R SRP $14.80 ea Traffic Accident Report Contains graphic symbols for illustrating traffic accident scenes. Size: 4½" x 10x" x.030". No. TD1131 SRP $16.15 ea Traffic Accident Similar to TD1131. Size: 4½" x 10" x.030". No. 131R SRP $25.80 ea Metric Architectural Plumbing Plan Views Contains American Standard lavatory and kitchen fixtures, institutional products, circles, squares, triangles, arrow. Scales: 1:200, 1:100, 1:50. Size: 15cm x 25cm x 5mm. No. 9383TAM Metric Pocket Pal Contains circles, triangles, squares, hexagons, and 100mm edge scale. Size: 9cm x 14cm x.8mm. No. 2050R SRP $11.55 ea PICKETT Metric General Purpose, squares, triangles, hexagons, and isometric ellipses in metric sizes. Circle diameters range from 2mm to 30mm. Size: 15cm x 25cm x.8mm. No. 1303I SRP $14.05 ea General Traffic Contains various symbols with emphasis on general traffic. Size: 3d" x 8" x.030". Metric Contains 43 metric circles from 1mm to 30mm. Size: 16cm x 25.5cm x.5mm. Contains 38 ellipses from 3mm to 40mm in 1mm increments. Size: 18.3cm x 32.4cm x.8mm. Metric Stars Contains 14 five-pointed stars from 1cm to 10cm. Size: 21.5cm x 23.5cm x.8mm. No. 130R No. 88TM SRP $5.85 ea No. 2123R SRP $21.10 ea No. 2013R SRP $21.95 ea
11 80 Lettering Microfont Guide Contains vertical letters and numbers in 1/8", 5/32", and 3/16". Size: 2" x 10¼" x.020". No. 964R SRP $17.25 ea Microfont Guide Same as No. 964R in 5/32", 3/16", and 1/4". Size: 2" x 11¼" x.020". No. 965R SRP $18.90 ea Lettering Stencil Set of 4 Sizes: 1/4" (5mm), 3/8" (10mm), 3/4" (20mm), and 18" (30mm). No. LS44 SRP $8.25 st Modern Bold Lettering Template Contains upper and lower case letters. Character/size: 1/8", 3/16", 1/4". Size: 2" x 10" x.030". No. TD260V SRP $9.50 ea Lettering Template Contains upper and lower case letters. Character/size: 1/8", 3/16", 1/4". Size: 1d" x 9½" x.040". S08 ELMERS Project Popperz Reusable Stencil Set of 90 Contains letters, numbers, and shapes in both 2" and 1" sizes. Durable plastic reusable material. Bonus mechanical pencil included. No. TD112 SRP $9.75 ea BH1SET No. E3062 SRP $6.50 ea BH4SET BH5SET Hi-Low Lettering Set of 3 Contains set of three templates in 1/8", 3/16", and 1/4" sizes. Slanted Gothic upper and lower case letters and numerals. Size: 2" x 7x" x.030" each. No. 940R SRP $36.99 st Lettering Guide & Rule A uniquely designed instrument combining a rotating disk with an indexed rim for adjusting letter height or establishing cross-hatch marks. English and metric line spacing. Size: 3d"l x 2a"h. AMES Lettering Guide & Rule A uniquely designed instrument combining a rotating disk with an indexed rim for adjusting letter height or establishing cross-hatch marks. English and metric line spacing. Size: 3d"l x 2a"h. BH7SET BH8SET BHS111SET No. AL666 SRP $3.35 ea No. L666 SRP $6.50 ea BH5SET Lettering Aid Contains slots for letter sizes 1/8", 5/32", 3/16", and 1/4". Size: 3a" x 6d" x.060". No. 925R SRP $10.99 ea Lettering Aid Same as No. 925R with sizes 1/16", 3/32", 1/8", 5/32", and 5". Size: 3s" x 7" x.030". No. 926R SRP $13.50 ea Lettering Aid Clear matte impact modified acrylic. Contains slots for letter sizes 1/8", 5/32", 3/16", and 1/4". Size: 3a" x 6d" x.060". No. TD1119 SRP $12.60 ea Large Lettering Aid 1/8", 5/32", 13/16", and 1/4" size slots for freehand drawing or drawing guide lines. Size: 10" x 4¼" x.030". No. 924R BHS111SET Lettering Stencil Sets These stencils are simple, error-free tools for so many decorative applications. Each 4-piece set includes a 3/8" and 1" stencil of the same font plus two pieces of colored cardstock. All stencils include alphabet, numbers, and special characters. SRP $9.75 st
Templates, Stencils. Architectural
68 Templates, Stencils Custom Design Templates Available Manufactured to individual design specifications to reduce or eliminate costly repetitive drafting time. Incorporating a logo and/or any special
More informationPrices Effective Through March 31, Architectural Mechanical Electric/Electronic Flow Chart/Logic Lettering Guides & Stencils Circles
2011 Templates Prices Effective Through March 31, 2012 5 Architectural Mechanical Electric/Electronic Flow Chart/Logic Lettering Guides & Stencils Circles 1.5 Metric Ellipses General Purpose Ruling & Measuring
More informationDownloaded from ENGINEERING DRAWING. Time allowed : 3 hours Maximum Marks : 70
ENGINEERING DRAWING Time allowed : 3 hours Maximum Marks : 70 Note : (i) (ii) Attempt all the questions. Use both sides of the drawing sheet, if necessary. (iii) All dimensions are in millimeters. (iv)
More informationTest Code: 8294 / Version 1
Pennsylvania Customized Assessment Blueprint Test Code: 8294 / Version 1 Copyright 2014. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment
More information2018 Technical Drawing Specifications Resource A guide to support VCE Visual Communication Design Study Design
2018 Technical Drawing Specifications Resource A guide to support VCE Visual Communication Design Study Design 2018 22 VICTORIAN CURRICULUM AND ASSESSMENT AUTHORITY 1 Contents A guide to support VCE Visual
More informationENGINEERING GRAPHICS
ENGINEERING GRAPHICS Time allowed : 3 hours Maximum Marks : 70 Note : (ii) Attempt all the questions. Use both sides of the drawing sheet, if necessary. (iii) All dimensions are in millimetres. (iv) Missing
More informationC A R I B B E A N E X A M I N A T I O N S C O U N C I L REPORT ON CANDIDATES WORK IN THE SECONDARY EDUCATION CERTIFICATE EXAMINATION MAY/JUNE 2010
C A R I B B E A N E X A M I N A T I O N S C O U N C I L REPORT ON CANDIDATES WORK IN THE SECONDARY EDUCATION CERTIFICATE EXAMINATION MAY/JUNE 2010 TECHNICAL DRAWING GENERAL PROFICIENCY Copyright 2010 Caribbean
More informationBUILD A SET. Part 4 Scaled Furniture
BUILD A SET The time saving tool for set designers of white card models. No drawing or measuring. Just print, cut & paste pre-scaled 1/2 :1-0 PDF template components. Living room Dining room Beds Bathroom
More informationEngineering Graphics. Class 2 Drafting Instruments Mohammad Kilani
Engineering Graphics Class 2 Drafting Instruments Mohammad Kilani Drafting Instruments A Design is as good as its instruments A engineering drawing is a highly stylized graphic representation of an idea.
More information1. Name the horizontal member that rests on the foundation wall to support other wood members.
Student Name: Teacher: Date: District: Rowan Assessment: 9_12 T and I IC62 - Drafting - Architr II Test 1 Description: Unit C - Floorplans - Test 3 (ALL) Form: 501 1. Name the horizontal member that rests
More informationCADprofi Table of contents list of new features in CADprofi 11.07:
11.07 Table of contents list of new features in CADprofi 11.07: - CADprofi Architectural - CADprofi Electrical - CADprofi Mechanical - CADprofi HVAC & Piping - General commands (affects all modules) -
More informationSAMPLE QUESTION PAPER II ENGINEERING GRAPHICS (046)
SAMPLE QUESTION PAPER II ENGINEERING GRAPHICS (046) Time Allowed: 3 hours Maximum Marks: 70 Note: (i) Attempt all the questions. (ii) Use both sides of the drawing sheet, if necessary. (iii) All dimensions
More informationSketching Fundamentals
Sketching Fundamentals Learning Outcome When you complete this module you will be able to: Make basic engineering sketches of plant equipment. Learning Objectives Here is what you will be able to do when
More informationLayout Tools. Marking and Layout Tools
Best Welds, Contour Sales Vendor Code: BWS, CON Welders & Pipe Fitters Rap-Around Double ruled so both the top and bottom surfaces can be used for layouts - it is never upside-down! Packaged in its own
More informationCompleted project drawing (dimensions added for reference)
CHAPTER 5 Fundamentals IV PROJECT EXERCISE This project exercise provides point-by-point instructions for setting up the drawing with layers and then creating the objects shown in the accompanying figure.
More informationAIU Exam Introduction to Architectural Design & Drafting
AIU Exam Introduction to Architectural Design & Drafting School: Science & Engineering Major: Architecture Course title: Introduction to Architectural Design & Drafting Credits for course: 3 credits Description
More informationDimension Below are the critical settings in AutoCAD. Other software should follow the same settings.
8.1 Drawing Standard 8.1.1 Introduction This drawing standard applies to all building drawings being prepared for the University of Calgary (UCalgary) by external consultants or vendors and internal staff
More informationInstallation Instructions
Installation Instructions For Models: Model Number / Description File Name 1540 Classic Series P-Lam Toilet Partitions 1540.pdf 1 INSTALLATION INSTRUCTIONS LAMINATED PLASTIC TOILET PARTITIONS 1540 Classic
More informationKitchen and Bath Design Planner
2017 Kitchen and Bath Design Planner How to Measure Your Kitchen or Bath for New Cabinets Measuring your space is a critical step in determining your room layout. Having accurate measurements of your kitchen
More informationReavis High School Curriculum Snapshot/Cover Page for Computer Aided Design (CAD)
Reavis High School Curriculum Snapshot/Cover Page for Computer Aided Design (CAD) Unit 1: Introduction In this unit, students will identify components of a Computer Aided Design (CAD) system and how to
More informationCKBD Peakes Bath Scoresheet
CKBD Peakes Bath Scoresheet Part I: Graphics & Presentation Standards Each question pertains to all four drawing documents: Floor Plan, Mechanical, Construction Plan, and Elevation Drawing unless specifically
More informationActivity Bracket
Activity 1.5.6 Bracket Introduction Studying how an object is fastened is not something you do every day. But, just for fun, consider looking at how your desk or your locker is held together. Most likely,
More informationDrawing Standards & Conventions for IDD
Drawing Standards & Conventions for IDD This document consists of a set of standards that have been developed to maintain a consistency in Interior Decoration and Design students work. The standards are
More informationAutoCAD and Its Applications BASICS Reference Material. Drafting Symbols
AutoCAD and Its Applications BASICS Reference Material Drafting Symbols Symbols provide a common language for drafters all over the world. owever, symbols are meaningful only if they are drawn according
More informationStandard Signs Manual
Standard Signs Manual NEW, CHANGED, OR DELETED 1/2017 STANDARD SIGN DETAILS Title Page Number Fractions... 101 Straight Arrows... 102 Double Head Arrows... 102A Double Head Arrows - 90... 102B Advance
More informationENGINEERING GRAPHICS (Code No. 046)
ENGINEERING GRAPHICS (Code No. 046) CLASS XI-XII The subject of 'Engineering Graphics' has become an indispensable tool for Engineers, Technocrats, Architects, Draftsmen, Surveyors, Designers and many
More informationEntry Level Assessment Blueprint Architectural Drafting
Entry Level Assessment Blueprint Architectural Drafting Test Code: 4004 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Preparing to Draw Identify drafting tools, materials, and
More informationENGINEERING GRAPHICS (XI-XII) (Code No. 046)
ENGINEERING GRAPHICS (XI-XII) (Code No. 046) The subject of 'Engineering Graphics' has become an indispensable tool for Engineers, Technocrats, Architects, Draftsmen, Surveyors, Designers and many other
More informationAdvanced Modeling Techniques Sweep and Helical Sweep
Advanced Modeling Techniques Sweep and Helical Sweep Sweep A sweep is a profile that follows a path placed on a datum. It is important when creating a sweep that the designer plans the size of the path
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLine Series 1180 DuraLine Series Class-A Fire Rated IMPORTANT: Review these instructions thoroughly prior to installation. FLOOR ANCHORED
More informationREADING ARCHITECTURAL PLANS
READING ARCHITECTURAL PLANS ARCHITECTURAL DRAWINGS FOR A HOUSE Architectural drawings contain information about the size, shape, and location of all parts of the house ARCHITECTURAL DRAWINGS FOR A HOUSE
More informationENGINEERING GRAPHICS ESSENTIALS
ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive
More informationGet out your notes and turn to Understand, Identify, and Label Floor Plans. If you don t have notes yet you can pick up copies on the back counter.
Get out your notes and turn to Understand, Identify, and Label Floor Plans If you don t have notes yet you can pick up copies on the back counter. It costs no more to build a house with a good plan, than
More informationTraditional Undermount: S Method (Undermount):
TOOLS REQUIRED 15.1 TOOLS REQUIRED The installation of Corian shape product must be a precise and exacting process to ensure that a good fit is always created. Using the correct tools is essential. In
More informationDisplay/Accessory Furniture
1 Multimedia Display End-of-Range, 60-013-S00 End-of-range displayer has five 59 1 /2" 19 3 /8" 16" 163 Sloped Shelving Book Displayer sloping shelf spaces for displaying books spine out at an angle for
More informationPROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
More informationTHE ARCHITECTURE HANDBOOK:
THE ARCHITECTURE HANDBOOK: A Student Guide to Understanding Buildings teacher edition Jennifer Masengarb with Krisann Rehbein Produced in partnership with Architectural illustrations by Benjamin Norris
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS LAMINATED P LASTIC TOILET PArTITIONS 1540 ClassicSeries with Options IMPORTANT: Storage and Handling Information on last page. For faster, easier installation, please review these
More informationTechnical Graphics Higher Level
Coimisiún na Scrúduithe Stáit State Examinations Commission Junior Certificate Examination 2005 Technical Graphics Higher Level Marking Scheme Sections A and B Section A Q1. 12 Four diagrams, 3 marks for
More informationNational Association of Women in Construction Education Foundation CADIDESIGNIDRAFTING COMPETITION HIGH SCHOOL STUDENTS
National Association of Women in Construction Education Foundation CADIDESIGNIDRAFTING COMPETITION HIGH SCHOOL STUDENTS DESIGN PROBLEM AND PROJECT DESCRIPTION I. PROJECT DESCRIPTION The design problem
More informationTime: 3 hours. 3 Section B Candidates should attempt questions 8, 9 and 10 and either question 11 or question 12. 4
[C033/SQP020] Higher Graphic Communication Specimen Question Paper Time: 3 hours NATIONAL QUALIFICATIONS Marks Grid Question Mark Section A Candidates should attempt all questions and are advised to spend
More information2010 Academic Challenge
2010 Academic Challenge ENGINEERING GRAPHICS TEST STATE FINALS This Test Consists of 40 Questions Engineering Graphics Test Production Team Ryan K. Brown, Illinois State University Author/Team Leader Jacob
More informationNCIDQ Restroom Drawing. Answers to the most common questions about this drawing for the Practicum Qpractice
NCIDQ Restroom Drawing Answers to the most common questions about this drawing for the Practicum. 2016 Qpractice Table of Contents This is a summary guide of most frequently asked questions about the Practicum
More informationResidential planning
Residential planning Planning Project starts with an assessment of the needs of the users and an understanding of their peculiar habits Key elements Dividing into active and quiet spaces Zoning functions
More informationPictorial Drawings. DFTG-1305 Technical Drafting Prepared by Francis Ha, Instructor
DFTG-1305 Technical Drafting Prepared by Francis Ha, Instructor Pictorial Drawings Geisecke s textbook for reference: 14 th Ed. Ch. 15: p. 601 Ch. 16: p. 620 15 th Ed. Ch. 14: p. 518 Ch. 15: p. 552 Update:
More informationVCE VET ENGINEERING STUDIES CERTIFICATE II
Victorian Certificate of Education 2009 SUPERVISOR TO ATTACH PROCESSING LABEL HERE STUDENT NUMBER Letter Figures Words VCE VET ENGINEERING STUDIES CERTIFICATE II Written examination Section Wednesday 18
More informationENGINEERING GRAPHICS
ENGINEERING GRAPHICS CLASS - XII (046) DESIGN OF THE QUESTION PAPER Time : 3 Hrs Max. Marks : 70 The weightage of the distribution of marks over different contents of the question paper shall be as follows:
More informationInterpretation of Drawings. An Introduction to the Basic Concepts of Creating Technical Drawings
Interpretation of Drawings An Introduction to the Basic Concepts of Creating Technical Drawings Introduction In the design process drawings are the main way in which information about an object or product
More informationCAD Mechanical Design I
EXAM INFORMATION Items 58 Points 85 Prerequisites NONE Course Length ONE SEMESTER Career Cluster ARCHITECTURE AND CONSTRUCTION MANUFACTURING SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS Performance
More informationArchitectural Aluminum Frames
Specialty requirements for room identification and control are accomplished with these unique frames. They feature built-in changeable messages, magnetic changeable signs and frames with dividers. Frames
More informationConversa /Concentra Manual
Conversa /Concentra Manual Starting point These days, office work is no longer about people working on their own, but joining in group- and project-work, training, formal meetings and informal discussions.
More information2. To develop basic skills in the use of drawing instruments and drafting techniques.
IT-111 ENGINEERING DRAFTING SYLLABUS Instructor: R. Edward Rode= Office: Room 110-4, Anzalone Hall Hours: Refer to Schedule Phone: (985-549-2092) Fax : (985-549-5532) Email : erode@selu.edu Course Title:
More informationStrengthened Technical-Vocational Education Program COURSE DESIGN
COURSE DESIGN COURSE TITLE : DRAFTING TECHNOLOGY NOMINAL DURATION : 1200 HOURS QUALIFICATION LEVEL : NC II COURSE DESCRIPTION : This course is designed to enhance the knowledge, skills, and positive attitudes
More informationBlock References and Attributes
CHAPTER 11 Block References and Attributes PROJECT EXERCISE 11A This project exercise provides point-by-point instructions for creating the objects shown in Figure P11A 1. In this exercise, you will apply
More information*X033/12/01* X033/12/01 HIGHER STAPLE HERE NATIONAL QUALIFICATIONS. 8 Orthographic drawings are in third angle projection.
Question 2 3 4 Section A Total 7a 7b 8 9 0 EITHER OR 2 Section B Total Total Marks A + B Marks STAPLE HERE FOR OFFICIAL USE 033/2/0 NATIONAL QUALIFICATIONS 204 THURSDAY, 8 MAY.00 PM 4.00 PM GRAPHIC COMMUNICATION
More informationtechnical drawing school of art, design and architecture nust spring 2011
technical drawing school of art, design and architecture nust spring 2011 http://www.youtube.com/watch?v=e55ocgb0l8o t e c h n i c a l d r a w i n g a mean to design reasoning spring 2011 the ability to
More informationTECHNICAL DRAWING HIGHER LEVEL PAPER II(A) ENGINEERING APPLICATIONS
M. 84 AN ROINN OIDEACHAIS AGUS EOLAÍOCHTA LEAVING CERTIFICATE EXAMINATION, 2001 TECHNICAL DRAWING HIGHER LEVEL PAPER II(A) ENGINEERING APPLICATIONS Friday, 15 June, Afternoon 2.00 5.00 p.m. 200 Marks INSTRUCTIONS
More informationDrawing Types & Construction Drawings
Drawing Types & Construction Drawings Building projects require several types of specialised drawings. This collection of drawings, known as a project set, includes: Location Plan Site Plan Floor Plan
More informationCLOTHING REQUIREMENT SkillsUSA-VICA Blazer, sweater, or windbreaker and accompanying official dress. Or appropriate professional/business attire.
BOARD DRAFTING - MECHANICAL PURPOSE To evaluate each contestant's preparation for employment and to recognize outstanding students for excellence and professionalism in the field of machine drafting. First,
More informationA Concise Introduction to Engineering Graphics
A Concise Introduction to Engineering Graphics Fourth Edition Including Worksheet Series A Timothy J. Sexton, Professor Department of Industrial Technology Ohio University BONUS Book on CD: TECHNICAL GRAPHICS
More informationCADprofi Summary of main changes made to the program since the CADprofi version.
11.01 Summary of main changes made to the program since the CADprofi 10.01 version. CADprofi Architectural extension of the woodwork library Additional types of windows and doors have been added to the
More informationENGINEERING AND DESIGN
ENGINEERING AND DESIGN EXAMINATION GUIDELINES GRADE 12 2017 These guidelines consist of 10 pages. Engineering Graphics and Design 2 DBE/2017 TABLE OF CONTENTS Page 1. INTRODUCTION 3 2. ASSESSMENT IN GRADE
More informationDFTG 1305 UNIT 1. Semester: Spring 2016 Class #: Term: SS Instructor: Mays ALSabbagh
DFTG 1305 UNIT 1 Semester: Spring 2016 Class #: 94412 Term: SS Instructor: Mays ALSabbagh Technical Drafting Unit One: Introduction to Drafting Chapter 1 : The World Wide Graphic language for Design Lecture
More informationprogecad EasyArch Note: Download a Free 30-Day Trial of progecad Professional (including EasyArch) at: Summary CADDIT 7/27/2011
progecad EasyArch Summary CADDIT 7/27/2011 Note: Download a Free 30-Day Trial of progecad Professional (including EasyArch) at: www.caddit.net Contents Introduction... 4 Settings... 4 Openings Centreline
More informationSHAPE level 2 questions. 1. Match each shape to its name. One is done for you. 1 mark. International School of Madrid 1
SHAPE level 2 questions 1. Match each shape to its name. One is done for you. International School of Madrid 1 2. Write each word in the correct box. faces edges vertices 3. Here is half of a symmetrical
More informationDrafting. Drafting and Design Technician
Drafting and Design Technician Program Description This program is designed to provide students with entry level skills in the fields of mechanical, electrical, civil and architectural drafting and/or
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationLeveling System Solutions
Leveling System Solutions Cabinet & Furniture Levelers The Cabinet Leveling System is the most versatile system for the woodworking industry. The variety of available products meets any requirement a craftsman
More informationP a r k c o n s o l e s i n k a s s e m b l y i n s t r u c t i o n s
P a r k c o n s o l e s i n k a s s e m b l y i n s t r u c t i o n s Before You Begin: Professional installation by two-person crew is required for this fixture. Install water supply and drain piping
More information11/12/2015 CHAPTER 7. Axonometric Drawings (cont.) Axonometric Drawings (cont.) Isometric Projections (cont.) 1) Axonometric Drawings
CHAPTER 7 1) Axonometric Drawings 1) Introduction Isometric & Oblique Projection Axonometric projection is a parallel projection technique used to create a pictorial drawing of an object by rotating the
More information2003 Academic Challenge
Worldwide Youth in Science and Engineering 2003 Academic Challenge ENGINEERING GRAPHICS TEST - REGIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator
More informationTECHNICAL DRAWING. SECTION A: will consist of (30) questions drawn from the general principles, techniques and uses of plane and solid geometry.
TECHNICAL DRAWING EXAMINATION SCHEME There will be three papers, Papers1, 2 and 3 all of which must be taken. Papers 1 and 2 will be a composite paper to be taken at one sitting. PAPER 1: will consist
More informationDublin Stalls Installation Instructions
Dublin Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 9/13/17 Part Identification Round Track Bracket (4) (Not Painted) Round
More informationmk Profile Technology
mk Profile Technology One Construction Kit, Many Options Base Technology Profile Technology Conveyor Technology Factory Equipment Linear Motion better products, better solutions One basic technology, four
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS HIGH PRESSUE LAMINATE (HPL) TOILET PARTITIONS 1030 TrimLineSeries 1040 DesignerSeries Includes continuous hardware option.65. IMPORTANT: Storage and Handling Information on last
More informationMarking Scheme Engineering Graphics
Marking Scheme Engineering Graphics All Questions are to be answered correctly and accurately. General Note: (i) (ii) (iii) (iv) (v) Marks are to be awarded in proportion to the work done. Mistakes in
More informationArchitectural Design
Punch! Pro Dream House Project After completing the tutorial and scale drawing exercises the students will design their dream home using Professional Home Design program, Punch! Home Design. Using Professional
More informationDimensioning. Dimensions: Are required on detail drawings. Provide the shape, size and location description: ASME Dimensioning Standards
Dimensioning Dimensions: Are required on detail drawings. Provide the shape, size and location description: - Size dimensions - Location dimensions - Notes Local notes (specific notes) General notes ASME
More informationPreference Collection and Treatment Console INSTALLATION GUIDE
Preference Collection 5580.69 and 5580.96 Treatment Console INSTALLATION GUIDE WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious
More informationDesign Process. Hand Sketching for Interiors Developing Visual Illustration Techniques SDC. Better Textbooks. Lower Prices.
Design Process Hand Sketching for Interiors Developing Visual Illustration Techniques Rick L. Bartholomew, RID SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices.
More informationFlange Dimensions Class 125 Bronze Flange Dimensions Class 300 Bronze Flange Dimensions Class 150 Bronze Flange Dimensions
Dimensions Class Bronze Dimensions Meets Ib. A.S.M.E. Stard Class 00 Bronze Dimensions Meets ANSI STD B. Nominal Dim. A O.D. Dim. B Circle Dim. C Hole No. Holes Nominal Dim. A Diam. Dim. B Min. Dim. C
More informationKitchen and Bath Design Tutorial
Adding Cabinets Chapter 5: Kitchen and Bath Design Tutorial This tutorial continues where the Materials Tutorial left off. You should save this tutorial using a new name to archive your previous work.
More informationINSTALLATION INSTRUCTION
INSTALLATION INSTRUCTION Plastic Laminate Series contents page 1030 TrimLineSeries...2-21 1040 DesigerSeries...2-21 Urinal Screens, Benches, Shower Seats...22-31 2030 TrimLineSeries Maximum Privacy...32-47
More information2012 Academic Challenge
2012 Academic Challenge ENGINEERING GRAPHICS TEST SECTIONAL This Test Consists of 40 Questions Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Leader Jacob Borgerson,
More informationBioPrism Solid Surface
Please read all instructions before installing products. These instructions are intended for use with InPro s standard toilet partitions, which include 58 high doors and wall panels, when deviating from
More informationRelated Drafting. (Construction related trades)
(Construction related trades) I. Course Description Related Drafting This course is broken up into 36 weeks. The main goal of this course is to introduce construction related trades the necessary skills
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and Handling Information on last page. Review
More informationNational Craft Assessment and Certification Program S P E C I F I C A T I O N S
National Craft Assessment and Certification Program S P E C I F I C A T I O N S INDUSTRIAL PIPEFITTER V4 September 2013 Focus Statement An advanced pipefitter: Masters mathematical functions and knows
More informationTechnical Drawing 101 with AutoCAD 2018
Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.
More information2004 Academic Challenge
2004 Academic Challenge ENGINEERING GRAPHICS TEST - REGIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator Kevin Devine, Illinois State University
More informationChief Architect New Feature List
SYSTEM / PERFORMANCE Chief Architect Premier X4 is available in 64 bit and 32 bit versions. The 64 bit version is more efficient in managing memory and you will see better performance on larger plan files
More informationEXIRA SHOWER SET INSTALLATION
SKU(s): 925470 EXIRA SHOWER SET INSTALLATION BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for
More informationMODULE 4 Planning your house continued
MODULE 4 Planning your house continued Planning Entrances Identify the purpose, uses and activities at the main entrance in a residence. Describe possible moods or feelings that a designer may try to convey/evoke
More informationPre-Engineering Graphics 2
Pre-Engineering Graphics 2 Hinsdale Central High School 2 Pre-Engineering Graphics 2 Hinsdale Central High School Pre-Engineering Graphics 2 Pre-Engineering Graphics 2 is the second course in a sequence
More informationCopyrighted. Material. Copyrighted. Material. Copyrighted. Copyrighted. Material
Engineering Graphics FREEHAND SKETCHING Introduction to Freehand Sketching Sketching is a very important technique for technical communication. Sketches can transfer ideas, instructions and information
More informationENGINEERING DRAWING IM 09 AND GRAPHICAL COMMUNICATION
IM SYLLABUS (2014) ENGINEERING DRAWING IM 09 AND GRAPHICAL COMMUNICATION SYLLABUS Engineering Drawing and Graphical Communication IM 09 (Available in September) Syllabus 1 Paper (3 hours) Aims The aims
More informationTrade of Metal Fabrication. Module 5: Pipe Fabrication Unit 6: Pipe Development Unequal Diameter 'T' Piece Phase 2
Trade of Metal Fabrication Module 5: Pipe Fabrication Unit 6: Pipe Development Unequal Diameter 'T' Piece Phase 2 Table of Contents List of Figures... 4 List of Tables... 4 Document Release History...
More informationUNIT A 879 SQ. FT. FLOORS 1 TO 4 REVERSE 879 SQ. FT. FLOORS 1 TO SQ. FT.
UNIT A 879 SQ. FT. 879 SQ. FT. REVERSE 879 SQ. FT. THE DEVELOPER AND BUILDER RESERVE THE RIGHT TO MAKE MODIFICATIONS AND CHANGES TO THE BUILDING, ANY UNIT, PARKING AREA AND STORAGE AREA DESIGN, SPECIFICATIONS,
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS COMPACT LAMINATE TOILET PARTITIONS 1080 DuraLineSeries 1180 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and Handling Information
More informationV4. CAD - Machinery. 5. Instructions for specifications a. A technical drawing shall be created in conformity with the following ISO standards.
IA2007 Shizuoka, Japan 7 t thh Internatiionall Abiillympiics Vooccattiioonall Skiillllss Coontteesstt V4. CAD - Machinery 1. Task Based on the drawing of a gear pump, create a detail drawing of the main
More information