ICECAST MSS TOOL KIT ANATOMY ICECAST MSS TOOL KIT COMPACT ÖSSUR POST-OP SOLUTIONS
|
|
- Marybeth Lee
- 5 years ago
- Views:
Transcription
1 ICECAST MSS TOOL KIT ANATOMY Icecast Anatomy represents a further development of the pressurecasting concept. Contour Cell shaping-chambers positioned over soft tissue areas can be inflated independently to achieve displacement of the tissue creating a more anatomically correct socket shape. The increased control over the socket shape enhances user comfort, stability and rotation control. As the residual limb is "loaded" by the pressurecasting instrument during casting, it is possible to eliminate the need for modification of the resultant socket shape. M Icecast MSS Tool Kit Anatomy Icecast Anatomy Bladder Icecast Pump Resin Injection Tool Distal Attachment Tool Taping Ring Icecast Case (with attachments for trolley) ICECAST MSS TOOL KIT COMPACT The Icecast Compact provides a simple and effective way of guaranteeing that a TSB socket fit is achieved for use with a 3mm profile Iceross silicone locking liner. The system provides a simpler and more durable socket fabrication tool than the Icecast Anatomy as it does not contain the Contour Cell technology. Socket fabrication is therefore simpler and modifications of the anatomical shape are minimal, without affecting user comfort. M Icecast MSS Tool Kit Compact Icecast Compact Bladder Icecast Pump Resin Injection Tool Distal Attachment Tool Taping Ring Icecast Case (with attachments for trolley)
2 ICECAST MSS TOOL KIT - SPARE PARTS Picture# 1. D Icecast Pump 2. D Icecast Anatomy Bladder 3. D Icecast Compact Bladder 4. M Resin Injection Tool 5. D Distal Attachment Tool for Icecast 6. D Distal Attachment Tool for Plaster Casting 7. X Taping Ring M Trolley for Icecast Case
3 ICECAST MSS MATERIAL KIT Icecast MSS Material Kit contains all the necessary materials to fabricate a single MSS socket. M MSS Material Kit/5" Glass Fiber Braids M MSS Material Kit/7" Glass Fiber Braids M MSS Material Kit/5" Carbon Fiber Braids M MSS Material Kit/7" Carbon Fiber Braids Glass Fiber Braids (5" or 7") or Carbon Fiber Braids (5" or 7") Resin Cartridge Silicone Insulation Sheets 2x0.6m (2x2ft) Silicone Insulation Cap Molding Tube MSS MATERIALS Picture# 1. M Resin Cartridge 1. M Resin Cartridge (10pcs) 2. M Silicone Insulation Sheets 30m (98ft) 3. M Bottom Seal 4. M Silicon Insulation Sheets 2x0.6m (2x2ft) 5. M Silicone Insulation Caps (10pcs)
4 ICECAST MSS MATERIALS The Pressure Pads are designed to reduce peak pressures in sockets due to prominent bony areas. Made from a non-compressible silicone that optimizes pressure redistribution, pressure pads can improve the comfort of laminated, thermoformed or directly manufactured sockets such as the Modular Socket System. The pads feature a self-adhesive backing to enable easy application. KITS Picture 1. K Set No. 1, 5 pads (one small disc, one medium disc, one large disc, one spoon pad and one cylindrical pad) 2. K Discs, 6 pads in 3 sizes (2 small, 2 medium, 2 large) 3. K Spoon (2 large pads) 4. K Cylindrical (8 large pads) 5. K Set No. 2, 8 pads (one small spoon, 2 cylindrical, small and large; 2 oval, small and large; 2 drops and one horse shoe) 6. K Oval, 8 pads, (4 small, 4 large) 7. K Ergo pads
5 ICECAST MSS MATERIALS FIBER BRAIDS M " Glass Fiber Braids w/ Distal Attachment M " Glass Fiber Braids w/ Distal Attachment (10pcs) M " Glass Fiber Braids w/ Distal Attachment M " Glass Fiber Braids w/ Distal Attachment (10pcs) M " Carbon Fiber Braids w/ Distal Attachment M " Carbon Fiber Braids w/ Distal Attachment (10pcs) M " Carbon Fiber Braids w/ Distal Attachment M " Carbon Fiber Braids w/ Distal Attachment (10pcs) COMPONENTS Össur recommends that the following products are used in conjunction with the Modular Socket System. L Modular Spacer for Icelock 600 Series* L Icelock Ratchet 621 Adaptation Kit L Icelock Lanyard 631 Adaptation Kit L Icelock Smooth 651 Adaptation Kit *Must be used with Icelock 600 series. A Hole Female Pyramid with 20/20 Offset L Icelock Clutch 4H 214 for Modular Socket System
Icelock 544 Technical Presentation. Sarah Mulroy (Clinical Specialist)
Icelock 544 Technical Presentation Sarah Mulroy (Clinical Specialist) AOPA 2016 Icelock 544 Series 3 valve Systems in 1 Removing the air between a prosthetic liner and rigid socket compartment (elevated
More informationNote: Lay-Up Schedules.
Fabrication Method This PDE fabrication presentation is designed to display elements of the fabrication processes with accompanying images to better visualize the fabrication process. Please make sure
More informationPRO-FLEX XC ÖSSUR DYNAMIC SOLUTIONS
Pro-Flex XC has been developed to comfortably accommodate the relatively active user, who enjoys hiking and jogging, as well as levelground walking. Comes with an aesthetically pleasing, anatomical footcover
More informationPatent pending. Product Manual
Patent pending Product Manual Transradial Fabrication Instructions 1. Thermoform flexible inner socket. 2. Contour the attachment ring. The socket attachment ring can easily be contoured by hand or by
More informationPROSTHETICS CATALOGUE Connective Componentry
PROSTHETICS CATALOGUE Connective Componentry Prosthetic and orthotic solutions for an active and independent lifestyle CONTENTS Section 1 ADAPTERS 3 Section 2 PYLONS AND KITS 12 Section 3 SPECIALTY ADAPTERS
More informationi-limb TM digits Component Assembly Guide
i-limb TM digits Component Assembly Guide This document provides instruction for prosthetists in the assembly of i-limb digits components necessary in the fabrication of i-limb digits prostheses. The instructions
More informationEXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8
EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8 KC-5 KC-8 Pump RPM 638 1022 Motor HP (kw) 0.33 (0.25) 0.50 (0.37) Oil Capacity, qts. (liters) 0.8 (0.76) Forced Drain w/ open suction, qts. (liters) 0.85 (0.80)
More informationA Below Knee Vacuum Casting Technique
A Below Knee Vacuum Casting Technique Drew A. Hittenberger, C.P. Kenneth L. Carpenter INTRODUCTION Accurate casting is thought by many to be the single most important factor in the successful fabrication
More informationKISS Product Catalog. KISS Technologies, LLC.
Sept 2009 KISS KITS...1 Delrin KISS Kit (KS1/A)... 1 4-Hole Endoskeletal KISS Kit (KS2/A)... 1 Pediatric Delrin KISS Kit (PKS1/A)... 1 Pediatric 4-Hole KISS Kit (PKS2/A)... 1 FABRICATION KITS & COMPONENTRY...
More informationTOOLKIT PART 4 MANUFACTURING PROCESSES
Understanding which manufacturing process has been used to make an object can help you identify its material as different materials are manufactured with different process. Different manufacturing processes
More informationHardwood Installation Products. Catalog No. 4
Hardwood Installation Products Catalog No. 4 Table of Contents Pages 1 2-4 5 6 7 8 9 Product Categories Moisture Meter & Self Leveling Concrete Restoration & Blades Abrasives Fastening Cutters & Accessories
More informationPROPRIO FOOT KEY FEATURES ÖSSUR DYNAMIC SOLUTIONS
PROPRIO FOOT is an adaptive microprocessor controlled ankle for low to moderately active amputees. Motor-powered ankle motion increases toe clearance in swing phase by raising the forefoot, reducing the
More informationRane Elastomer Processors
+91-8048763012 Rane Elastomer Processors https://www.indiamart.com/raneelastomer/ We are one of the top-notch manufacturer, Trader and exporter of quality industrial rubber products, silicon rubber products,
More informationSo if you re building or remodeling a kitchen or bath, Decorative Edge moldings are the affordable design option you just can t afford to overlook.
ARBORITE DECORATIVE EDGE FABRICATION TECHNICAL DATA Manufacturer Arborite 385 Lafleur, Lasalle (Québec), H8R 3H7 Web site: www.arborite.com - Phone: 1-800-996-0366 Alternate manufacturing facility Fletcher,
More informationStandard Vinyl Railing with Square Balusters
Standard Vinyl Railing with Square Balusters KIT INCLUDES: 1-2" x 3-1/2" Vinyl Top Rail 1-2" x 3-1/2" Vinyl Bottom Rail Square Vinyl Balusters- Level - 13 per 6' Kit 18 per 8' Kit 22 per 10' Kit Stair
More informationRBP-1215B-RX DODGE RAM QUAD CAB RX3
RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side
More informationSTRATUS SHELTER. Take bike parking to new heights
Take bike parking to new heights The Stratus Shelter is a striking bike shelter option for any transit station, university campus, or multi-family residential building project. It is constructed of American
More informationRhino Packing Gland Tool
Instruction Sheet P/N Rhino Packing Gland Tool 1. Description See Figure 1. The Rhino packing gland tool is used to remove the packing gland from Rhino bulk unloader pumps. The tool consists of two components,
More informationSelf Feeder. Soldering-Related Equipment and Materials. V-Groove Maker. Features. Packing List. Specifications. Option
Self Feeder V-Groove Maker Features Minimize solder and flux splash Cutting a V-groove on the solder surface enables the release of gas pressure generated by the flux, thereby suppressing splash. HAKKO
More informationscale size page name Stirling '60' 1 of 9
of of ) smooth ) Loctite ) pressfit 4) solder 5) pin * see : [mm] of 8, 5,5 8, 8,6,4 0,8 4, 6 5,5 84, 00,4 7,4 4,6 0, 7 5 (4x) R5 R 0,8,4 M4(4x) (countersunk, x) upper platform: wood ( :) (countersunk,
More informationSERVICE ADVISORY SA-11
SUBJECT: This document provides repair procedures of the Brush block assembly, and it: BRUSH ASSEMBLY REPLACEMENT BRUSH MODULE REPLACEMENT BRUSH REPLACEMENT CONTENTS: Page: I. GENERAL 1 II. NOMENCLATURE
More informationthoroughly tried and tested! EWE Tapping Valves A single system for all types of pipes
thoroughly tried and tested! EWE Tapping Valves A single system for all types of pipes www.ewe-armaturen.de EWE Tapping Fittings high-quality products from Germany EWE tapping fittings are the product
More informationFeltkütur products Prod uct description Product capabilities Product properties Installation guide Dress it up in haute couture feltkutur.
Feltkütur products Installation guide Product description Product capabilities Product properties Installation guide Dress it up in haute couture feltkutur.com Product description Düotex The Düotex is
More informationTYPE 3740XL EXTRA LARGE WET RUNNING CARTRIDGE SPLIT SEAL
1 Foreword These instructions are provided to familiarize the user with the seal and its designated use. The instructions must be read and applied whenever work is done on the seal, and must be kept available
More informationDiesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
More informationCelebrating. 65 Years
Celebrating 65 Years Contents Beveling Equipment Clamps - Internal Clamps - External Auxiliary Equipment Pipe Lifting Welding Qualification Pipe Bending Beveling Equipment On Band Type Beveling Machine:
More informationBBM 911. Dry drilling machine up to Ø 160 mm. hand guided. Versatile dry drilling machine for drilling up to Ø 160 mm
Dry drilling machine up to Ø 160 mm BBM 911 hand guided ADVANTAGES Sudden stop safety clutch Solid made housing, powder-coated die-cast aluminium for durability Versatile dry drilling machine for drilling
More informationMold Change, Quick Reference Guide, for Models, 22HF, 16HF, and 1600
Knowledge Base Article Type: Instructions Mold Change, Quick Reference Guide, for Models, 22HF, 16HF, and 1600 Description: Instructions on How to Mold Change - Quick reference Guide. Instructions on how
More informationDynaPower Generation II
DynaPower Generation II Return to DYNAPOWER index Return to MAIN index GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING
More informationAxis Mounting System Instructions
M Panadent Corporation 580 S. Rancho Avenue Colton, California 92324, USA Tel: (909) 783-1841 USA & Canada (800) 368-9777 These instructions apply to the following items: h2250 2251 Axis Mounting System
More informationTYPE 3740 WET RUNNING CARTRIDGE SPLIT SEAL Technical Specification
A Mating Ring B Mating Ring Adapter Assy. C Sealing Element Gasket D Sealing Element Strip E Sealing Element O-ring F Set Screw G Primary Ring H Retaining Ring I Spring Adapter Assy. Set J O-ring (Split)
More informationDiesel Hammer Model D19-42 Part #
Diesel Hammer Model D19-42 Part # 120491 2 Diesel Pile Hammer Part # 120941 Pos Order No. Pg Description Qty 120941 Diesel Pile Hammer D19-42 (Bauer MNR:426514) 1 160198 4 Cylinder Lower Part cmpl 1 2
More informationBolt-On/Rugged Fender Flares Chevy Silverado (99-07) Please read instructions entirely before installing this product.
Please read instructions entirely before installing this product. Hardware Included QTY Hardware Included QTY Bolt Kit Included QTY EXTRUSION 25ft FASTENERS 24 ALLEN KEY BOLT 42 ALCOHOL TOWELETTE 4 SCREWS
More informationHB Model with Upholsterable Back. HB Model. Synchronous. Mechanism - Knee-Tilt
sterling 2 seating FamIly choose FROm a Full FamIly OF seating OptIONs... HB Model HB Model with Upholsterable Back 2. Knee-Tilt Mechanism - Allow the user s feet to stay firmly planted on the floor while
More informationBall Screws. 30 THK Products. Shown in photos above. Semiconductor production equipment (dicing saw) Application of LM Guides and Ball Screws
28 29 THK Products The letters LM in our LM Guides stand for linear motion. LM Guides are important components of machines used for facilitating gentle and accurate sliding action. The letters LM in our
More informationSPS TECHNIK. everything from a single source
SPS TECHNIK everything from a single source planning and execution simulation electrics and mechanics design production, mounting software development commissioning after-sales service PRODUCTS AND SERVICE
More informationWrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
More informationThe ability to make basic voltage and resistance measurements using a digital multimeter
Congratulations on your purchase of a new OneShot chassis! The PC01 OneShot combines a rugged enclosure, power supply, and discrete instrument DI in a compact 1/4U package. A few minutes of assembly are
More informationMaximum Safety. Maximum Durability. Insulated Hand Tools
Maximum Safety. Maximum Durability. Insulated Hand Tools Tools Designed To Keep You Safe Wherever The Job Takes You Meets The International Standard For Live Line Working IEC 60900:2012 and ASTM F1505
More informationIntroduction to Manufacturing Processes
Introduction to Manufacturing Processes Products and Manufacturing Product Creation Cycle Design Material Selection Process Selection Manufacture Inspection Feedback Typical product cost breakdown Manufacturing
More informationThermoforming Components TOOLING TECHNOLOGY
Thermoforming Components TOOLING TECHNOLOGY TOOLING TECHNOLOGY Trim Tool Components Cone Locator Cartridges PDSP75 Male cone locator cartridge PDSP76 Female cone locator cartridge Cone locator cartridges
More informationReliance SG777 Series Steel Water Gage Valves
Installation, Operation, & Maintenance Instructions R500.SG777 10/16/2016 Reliance SG777 Series Steel Water Gage Valves Note: Design variations in Steel Water Gage Valves necessitate typical illustrations,
More informationDynaPower Generation II
DynaPower Generation II Return to DYNAPOWER index Return to MAIN index DYNAPOWER MODEL 4.8 & 6.0 VARIABLE PUMP PARTS DRAWING 1 DYNAPOWER MODEL 4.8 & 6.0 VARIABLE PUMP PARTS DRAWING 2 DYNAPOWER MODEL 4.8
More informationLTI Locking Shoulder Joint Instructions (SJ90)
LTI Locking Shoulder Joint Instructions (SJ90) The LTI Locking Shoulder Joint (SJ90) is a new design that replaces the previous LTI-Collier Locking Shoulder Joint (SJ50). This new joint has many features
More informationINSTALLING T400 LOAD SENSORS
INSTALLING T400 LOAD SENSORS The above illustrations represent the proper arrangement of Model T400 Load Sensor kit parts using either the Drill and Tap method or the Weld method. A proper installation
More informationShape sensing for computer aided below-knee prosthetic socket design
Prosthetics and Orthotics International, 1985, 9, 12-16 Shape sensing for computer aided below-knee prosthetic socket design G. R. FERNIE, G. GRIGGS, S. BARTLETT and K. LUNAU West Park Research, Department
More informationPRODUCT: LOKI INSTALLATION INSTRUCTIONS. Product is covered by U.S. patents. For more information visit
R INSTALLATION INSTRUCTIONS PRODUCT: LOKI CONFIGURATION: SINGLE DOOR MOUNT: GLASS MOUNT Product is covered by U.S. patents. For more information visit www.krownlab.com . TOOLS + MATERIALS REQUIRED TOOLS
More informationSELF-ALIGNING PLASTIC INCLINOMETER CASING IN BOREHOLES. Model GEO-LOK. Roctest Limited, All rights reserved.
INSTRUCTION MANUAL SELF-ALIGNING PLASTIC INCLINOMETER CASING IN BOREHOLES Model Roctest Limited, 2013. All rights reserved. This product should be installed and operated only by qualified personnel. Its
More information4.2 - PUMP MAINTENANCE MODELS: AC, AS, WC, WS
4.2 - PUMP MAINTENANCE MODELS: AC, AS, WC, WS 4.2.1 - EXPLODED VIEW DRAWING REF NO. 1 2 4 QTY 3 1 1.5 5 ¾ HP HP HP HP HP DESCRIPTION PART # 1 CASE 1.25 x 1 NPT 018266 1 CASE 1.25 X 1 NPT 018268 1 CASE
More informationDiscover T-Leg tables are available in a range of shapes and sizes, two top options and fixed or nesting leg options.
Discover T-Leg tables are available in a range of shapes and sizes, two top options and fixed or nesting leg options. 1-1/8 Particleboard Core with Flat Edge (F) Work surface is constructed of a 1-1/8
More informationCable Preparation & Tooling
Cable Preparation & ing PAGE CABLE CUTTERS HAND OPERATED RATCHET ACTION TOOLS HEAVY DUTY RATCHET CABLE CUTTERS RATCHET CABLE CUTTERS FOR SWA CABLES HYDRAULIC CABLE CUTTERS WIRE PREPARATION & CUTTING TOOLS
More informationTYPE 3740/3740D WET/DRY RUNNING CARTRIDGE SPLIT SEAL
1 Foreword These instructions are provided to familiarize the user with the seal and its designated use. The instructions must be read and applied whenever work is done on the seal, and must be kept available
More informationDistal Fibula Plate SURGICAL TECHNIQUE
MAXLOCK EXTREME Distal Fibula Plate SURGICAL TECHNIQUE Contents Key Design Features 3 Surgical Technique 4 Implants and Instruments 8 Proper surgical procedures and techniques are the responsibility of
More informationAvailable in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationGeneral Guidelines:
ASSEMBLY INSTRUCTIONS Congratulations on your new Patriot Dock purchase. This manual contains instructions to assemble basic dock configurations for use at typical residential shoreline application. Please
More informationOrthopaedic Casting and Splinting Example Book
Orthopaedic Casting and Splinting Example Book X-LITE The Material X-LITE is an airy and lightweight material engineered to meet your splinting, bracing and casting demands. X-LITE is a plastic material
More informationThis is trial version
Guiding components, Locating units, Dowel pins, Screws, Springs, Dateand recycling inserts, Retaining rings, Lifting devices, Clamping-systems, Thermal insulating sheets, Locating rings 1.01 1.02 Ordering
More informationWoodworking & Solid Surface Finishing Products
Woodworking & Solid Surface Finishing Products Abrasives for the Wood Industry Engineered for the woodworking professional. Mirka surface finishing products and solutions are used throughout the woodworking
More informationIMPORTANT! Recommended Tools. 7/16 Deep socket Phillips screwdriver
IMPORTANT! Read all instructions carefully before commencing any work. Always wear proper safety equipment. Some installation steps will require two or more installers. Recommended Tools Ratchet 10-mm
More informationOxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
More informationSquare Wheel Belt Grinder Models: 4103, 4106, and 4126AC
This Manual is Bookmarked Operating Instructions Parts Manual Square Wheel Belt Grinder Models: 4103, 4106, and 4126AC WHM TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Ph.: 800-274-6848 www.wmhtoolgroup.com
More informationInstallation Instructions for Vista Air Vertically Folding Walls
Installation Instructions for Vista Air Vertically Folding Walls Use these instructions in conjunction with your shop drawings to see the specifics that are particular to the model you are installing.
More informationMetFit MECHANICAL FITTINGS
MECHANICAL FITTINGS ENGINEERED FOR DEPENDABILITY HOW THEY WORK & WHY THEY ARE DIFFERENT CONSISTENT, REPEATABLE INSTALLATION Simple one-step squeezing motion COMPENSATES FOR COLD FLOW Ring maintains continuous
More informationInstruction Sheet P/N _06 5/2014
Instruction Sheet P/N 1029717_06 5/2014 ProBlue, ProBlue Liberty, DuraBlue, or Mesa Thermostat Service Kit - P/N 1028321 This instruction sheet describes the procedure for replacing a manifold or tank
More informationHDS CHAIR p o r t a b l e c h a i r
HDS CHAIR p o r t a b l e c h a i r The HDS is a comfortable and versatile portable chair that link and stack easily onto storage trolleys. With a robust steel frame, fabricated from oval tubing and rod
More informationOffer expires: January 31, Because You Have Work To Do FALLPROMOTION FEATURED NEW PRODUCTS
Offer expires: January 31, 2012 Because You Have Work To Do FALLPROMOTION FEATURED NEW PRODUCTS NEW PRODUCTS $159.95 $104.99 *To Order Use Part# D010102-SPL Limited Time Offer: Buy An 8 Piece Stubby Ratcheting
More informationCOMPONENTS (FIGURE-1):
INSTRUCTION SHEET VEHICLE STABILIZATION BASE SET KIT PN: 22-796303 INCLUDES: 22-796331, 22-796161, 22-797042E KIT PN: 22-796309 INCLUDES: 22-796308, 22-796161, 22-797042E COMPONENTS (FIGURE-1): 1. VSK
More informationThermal Wire Stripper
Thermal Wire Stripper Thermal Wire Stripper Blade not included Thermal wire stripper that ensures clean-cut removal of wire insulation High stripping perfmance ensures clean cut through highly heat-resistant
More information*Before starting, please read entire manual *Changes can be made in order for this manual to work for you. 3 x 6 I-Beam
*Before starting, please read entire manual *Changes can be made in order for this manual to work for you 3 x 6 I-Beam Follow all applicable sections of the attached Manufacturing Plan. Objectives: Understand
More informationEMI Shielding and Grounding Materials
EMI Shielding and Grounding Materials P-SHIELD Shielding and Grounding Materials Polymer Science, Inc. offers a complete EMI shielding and grounding materials product line. P-SHIELD EMI shielding materials
More information$79.95-H $69.95-H. Single lens. Double lens A. B. F. G. H. I.
TOP LINE GOGGLES - 3450 Ranked number one frame and lens system in the industry Ergo frame, nicknamed the super goggle - now available in a lacquered gel finish Triple felted foam for one of the most comfortable
More informationBolt-On/Rugged Fender Flares Chevy CK PICKUP (88-98) Please read instructions entirely before installing this product.
Please read instructions entirely before installing this product. Hardware Included QTY Hardware Included QTY Bolt Kit Included QTY EXTRUSION 25ft SMALL CLIPS 14 ALLEN KEY BOLT 42 ALCOHOL TOWELETTE 4 SCREWS
More informationSales & Service. JFK - Just For Kids. sasportonline.com. 135 Forestview Road 7879 Will Rogers Blvd.
Sales & Service sasportonline.com SA Sport (Canada) SA Sport (U.S.A.) 135 Forestview Road 7879 Will Rogers Blvd. P.O. Box 40 Fort Worth, Texas Orillia, Ontario USA 76140 Canada L3V 6H9 Telephone: (705)
More informationProduct # Drive Size (in) Overall Length (in) /4 5-3/ /4 6-1/ /8 7-11/ / /2 9-3/ /2 10-1/4
STANLEY Pear Head Quick Release Ratchets Pear head design for strength, durability, and performance. Quick-release mechanism to lock sockets onto the drive during operation and allow easy changeover. Reversible
More informationHardware List For Small Block Tru Trac Serpentine System without A/C
x4 Hardware List For Small Block Tru Trac Serpentine System without A/C x1 Short Spacer Nut 8mm-1.25 x 25mm 12pt. Cap Screw x3 Long Spacer Nut x1 3/8-16 x 3/4 12pt. Cap Screw x1 8mm-1.25 x 25mm Flat Head
More informationManual for Propeller Type H40F
Manual for Propeller Type H40F Propeller Type: Propeller Serial No.: Date of Sale: Seal and signature of Manufacturer: Index 1 List of Modifications... 3 2 Description... 4 3 Specification of Helix Propeller
More information2015 Q1 Lifetime W NEW PRODUCTS arranty
NE 2 W 01 PR 5 Q OD 1 UC TS Lifetime Warranty aster Tool Set & Tool Storge 09015 09523E 09902E 15PC. 3/DR. SOCKET SET (ETRIC) 14PC. 3/DR. SOCKET SET (ETRIC) 2 PC. 3/DR. EXTRA LONG EXTENSION SET 12991E
More informationTech Unit No: Approved By: Quality Engineer Date: Lock-Set Packer
Tech Unit No: 0802340000 Revision: A Approved By: Quality Engineer Date: 11-5-2014 Lock-Set Packer Description: The MAP Model Lock-Set Retrievable Casing Packer is a general purpose packer for production,
More informationMIG/MAG Welding Torch ABIMIG 645 W liquid-cooled
MIG/MAG Welding Torch ABIMIG 645 W liquid-cooled C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M ABICOR BINZEL. The right welding torch for every job! BINZEL air cooled welding torches incorporate
More informationInstructions for Use. LCP Locking Compression Plate. Combine without Compromise.
Instructions for Use LCP Locking Compression Plate. Combine without Compromise. Table of Contents LCP: Combine without Compromise 2 AO ASIF Principles of Osteosynthesis 4 Indications and Contraindications
More informationSeries 80 In-Line Mounted Centrifugal Pumps
Bulletin B-G Bell & Gossett Series In-Line Mounted Centrifugal Pumps Applications Hydronic Heating & Cooling Systems Industrial Process General Service Pressure Boosting Advantages Close Coupled Space
More informationMIG/MAG Welding Torch ABIMIG 401 WT / ABIMIG 501 WT liquid-cooled, with divided liner
MIG/MAG Welding Torch ABIMIG 401 WT / ABIMIG 501 WT liquid-cooled, with divided liner C E R DIN EN ISO 9001 Q M T - I F S I Y E T S D E M BINZEL. The welding torch for every job! BINZEL liquid cooled welding
More informationCenomic. Flexible full-volume bead mill. Innovations for a better world.
Cenomic. Flexible full-volume bead mill. Innovations for a better world. Cenomic TM. Flexible full-volume bead mill. Full-volume agitated bead mill. For an unbeatable price-performance ratio. Leading companies
More informationEMI Shielding and Grounding Materials
EMI Shielding and Grounding Materials P-SHIELD Shielding and Grounding Materials Polymer Science, Inc. offers a complete EMI shielding and grounding materials product line. P-SHIELD EMI shielding materials
More informationScrewdrivers Nut Drivers Hex Keys Bit Holders and Bits
Screwdrivers Nut Drivers Hex Keys Bit Holders and Bits SCREWDRIVER SETS SET NO. 88819 19 PC. COMBINATION SCREWDRIVER SET 88203 Cabinet Tip 3" 88204 Cabinet Tip 4" 88208 Cabinet Tip 8" 88214 Cabinet Tip
More informationMetrology Prof. Dr Kanakuppi Sadashivappa Bapuji Institute of Engineering and Technology Davangere. Lecture 34 Pneumatic Comparators
Metrology Prof. Dr Kanakuppi Sadashivappa Bapuji Institute of Engineering and Technology Davangere Lecture 34 Pneumatic Comparators (Refer Slide Time: 00:13) (Refer Slide Time: 00:17) I welcome you all
More informationABRASIVE CATALOGS. Application: Weld dressing Cutting off smoothing of Casting Can be applied on various kind of Steel and non-ferrous materials
ABRASIVE CATALOGS Reinforced Depressed Centre Grinding Discs are excellently fabricated depressed centre grinding discs that are exclusively available in varying diameters of 4-9 in different thickness.
More informationAn introduction to resin infusion
An introduction to resin infusion The vacuum infusion process is becoming more widespread within the composites industry and is already commonly used in the marine sector and for wind energy. Trevor Osborne,
More informationBolt-On/Rugged Fender Flares Ford F150 (15-ON) Please read instructions entirely before installing this product.
Please read instructions entirely before installing this product. Hardware Included QTY Hardware Included QTY Bolt Kit Included QTY EXTRUSION 29ft RETAINING CLIP 4 ALLEN KEY BOLT 42 ALCOHOL TOWELETTE 4
More informationGrain Tank Cross Auger Trough Liner for John Deere 9400 / 9500 Combine
www.polyskid.com P. O. Drawer 349, Monticello, GA. 31064 Phone: 800-542-7659, Fax: 706-468-2881 E-Mail: polytech@polyskid.com Grain Tank Cross Auger Trough Liner for John Deere 9400 / 9500 Combine FOR
More informationWarnings. Description. Prior to Installation Tools Needed
Warnings Failure to act in accordance with the following may result in death or personal injury. The JT Strong Arm Stabilizer System is intended to eliminate chassis movement in travel trailers and fifth
More informationProduct #: Product #:
STANLEY FATMAX Push-Lock Groove Joint Pliers Multi-purpose jaws designed to grasp flat and round objects. Push-Lock technology allows for quick and easy adjustment in 17 positions. Induction hardened jaws
More informationCanAm Tool manufactures, distributes and exports a complete professional mechanical taping and finishing tool system for drywall contractors.
CanAmTool The home of drywall taping and finishing tools. CanAm Tool Corp. Welcome to CanAm Tool, the home of drywall taping and finishing tools. Since our founding in 1973, CanAm Tool has built our success
More informationTECHNICAL FEATURES GLOVE
TECHNICAL FEATURES GLOVE 02/2018 STATIONARY CHAIR 4-LEGGED CHAIR Perforated polypropylene (variable thickness of 6-8 mm) / Fully upholstered (foam thickness of 5 mm) / Wooden (10 mm thick beech polylaminated)
More informationBoGo DEAL$! Pricing and promotion good thru 04/28/17 GET GET $ $69.10 FREE FREE. 15 Piece Brake Service Kit
Pricing and promotion good thru 04/28/17 KDT3886 40 Piece GearWrench Tap and Die Set Metric 40 piece set covers taps and dies from 3mm to 12mm Ratcheting T Wrench provides a 5 degree ratcheting arc for
More informationMTP Set SURGICAL TECHNIQUE
MINI MAXLOCK EXTREME MTP Set SURGICAL TECHNIQUE Contents Table of Contents Key Design Features 3 Surgical Technique Standard MTP Plate 4 MTP Plate with POCKETLOCK Technology 10 Implants and Instruments
More information3/2004. Core Barrel Tool Assembly and Disassembly
3/2004 Core Barrel Tool Assembly and Disassembly Core Barrel Tool Assembly and Disassembly This document covers the assembly and disassembly procedure for two variants of the Core Barrel modular system:
More informationGrand Slam 270 Installation Instructions
Grand Slam 270 Installation Instructions TACO Metals Inc., info@tacomarine.com TACOmarine.com INSTALLATION OF YOUR NEW GRAND SLAM 270 OUTRIGGER BASE ON A T-TOP (CANVAS TOP) When installing the Grand Slam
More informationDisassembly Instructions for Recycling June 10, 2010
Disassembly Instructions for Recycling June 10, 2010 These instructions apply to all workstation and wall products. Disassembly Once workstations or walls are dismantled as described under Disassembly
More information4200 JSP, KSP, LSP and MSP Cabinets
4200 JSP, KSP, LSP and MSP Cabinets Instructions May 1995 Issue 1, 34-7037-9012-0 1 2 Contents: 1.0 General... 4 2.0 Description of Cabinets... 4 3.0 Accessories and Optional Cross Connect Test Probes...
More information