Dear SIQ partner! One-to-one meetings will also be held throughout the whole seminar, according to your wishes and the availability of the SIQ staff.

Transcription

1 Tržaška cesta 2 SI-1000 Ljubljana Slovenia T F safety@siq.si, Dear SIQ partner! We are writing to invite you and your colleagues to our 5 th International Training Seminar, which will be held in on. This seminar is perfect for all those who want to gain further knowledge and experience about safety and EMC testing, those looking for answers to unsolved technical questions, anyone dealing with international certification procedures, and those with an interest in the new developments that are constantly emerging in the world of global conformity assessments. Welcome to our new home! With over 9,000 m 2 of floor space available, including 38 dedicated testing rooms, this is a place where you can find cutting-edge joint laboratories for electrical and mechanical safety, EMC, environmental, explosion protection, gaming technologies and cybersecurity testing, making us one of the largest and most modern laboratories in Europe. The synergies at our disposal give us greater efficiency and extend our testing flow and knowledge sharing environments, which in turn allows us to better customise our services to your specific requirements. One-to-one meetings will also be held throughout the whole seminar, according to your wishes and the availability of the SIQ staff. On the evening of 12 October, however, we take a break from all the seriousness and invite you to join us for a dinner party and some fun activities! We look forward to seeing you. Best regards, Gregor Schoss Technical Director

2 The agenda for the seminar is ready. Spaces are limited please register as soon as possible; EUR 100 discount is available for registrations before Easy online registration at AGENDA 12 October, Hotel Lev 8:00 Registration and coffee 8:30 Welcome and introduction 9:10 New developments in international approvals through SIQ direct market access 9:50 TÜV Rheinland: Market access to Gulf and Persian countries 11:30 Cyber security and potential safety risks associated with communication between public networks and appliances 13:30 What are the implications of the new revision of the ISO/IEC standard for manufacturers testing laboratories 14:00 The interaction between a battery with a charging system and the end-product 14:30 Understanding leakage current measurement principles 15:20 Integrating a radio module into an appliance and what to be aware of regarding European and North American compliance 15:50 IP versus the NEMA rating system 16:20 New features of the SIQ online portal 16:30 End 17:30 Evening event, dinner There will be coffee breaks in the morning (11:10) and afternoon (15:00), and lunch will be served at 12:30 in the hotel restaurant.

3 13 October, new SIQ premises 8:20 Transfer from Hotel Lev to the new SIQ premises 8:40 Registration and coffee 9:00 Relevant standardisation and new regulatory developments with practical cases: OFF MED HOUS Designing for compliance to IEC nd Ed. including the transition from products approved in accordance to IEC What brings 3 rd Edition? Occupational Safety and Health Administration (OSHA), Network Equipment- Building System (NEBS) and the National Electric Code (NEC). Touch current and protective conductor current measurement, temperature test on potted equipment, evaluation of hiccup mode during fault condition, radiated emission testing, electrostatic discharge testing. New medical regulation and the requirements for marking products with an UDI number Occupational Safety and Health Administration (OSHA) and Food and Drug Administration (FDA). Defibrillator proof testing, ingress protection testing, laser safety testing, proximity fields immunity testing, electrostatic discharge testing. Recent and forthcoming changes to the EN/IEC standard series. Basis of LVD risk assessment with practical examples. Plug discharge in combination with electromagnetic phenomena tests, software evaluation principles, photobiological safety testing, ingress protection testing, radiated emissions testing. 15:30 End TOOL Common challenges with transferring projects from EN/IEC to EN/IEC Evaluation of electronic circuits providing safety critical functions. Vibrations and noise measurements, photobiological safety, additional requirements for tools incorporating battery and charger, conducted emissions testing, electromagnetic fields (EMF) testing. Automotive Theory of vibrations Typical climatic-mechanical and EMC tests in the automotive industry, with practical examples Icing test, ingress protection testing, salt mist test, photobiological safety, radar pulse, stripline testing, electrostatic discharge testing. The coffee break room will be open throughout the duration of the seminar, and a warm buffet lunch will be served at 12:30.

4 Arriving on 11 October We would like to invite you to visit our new premises for a quick tour and to attend some one-to-one meetings (from 17:00 onwards); a warm buffet dinner will be served at 19:00. A taxi transfer to SIQ will be organized for your arrival, and a bus will be available to take you back to the hotel at 21:00. Leaving on 14 October If you have no plans after the seminar, you are kindly invited to join us on a tour on 13 October to one of Slovenia s many beautiful locations. Venues: Hotel Lev SIQ new premises Vošnjakova ulica 1 Mašera-Spasićeva ulica Ljubljana 1000 Ljubljana lev@union-hotels.eu t +386 (0) Price: Partner price: 1 day: EUR 490, 2 days: EUR 630, regular price: 1 day: EUR 700, 2 days: EUR 900 EUR 100 discount when registering before Recommended accommodation: Hotel LEV, price EUR 79 per night (single room) not included in seminar fee. We have made a preliminary booking for you. Please either use the code SIQ2017 or let us know and we will make reservation on your behalf. The deadline for reservations is 10 September 2017 and the hotel s cancellation policy applies. For on-line reservations, please follow the link: Contacts: Andrej Lange Sara Zapušek andrej.lange@siq.si sara.zapusek@siq.si t +386 (0) t +386 (0) m +386 (0)

5 REGISTRATION FORM Attendee Name: Arrival: Materials in digital form only preferred (date & time) Mobile phone: Flight No. Departure: Airport transfer from, back to (date & time) (return 1.5h before flight time) Dietary request: Favourite song: Shoe size: EU Company Name: Address: ZIP/City: VAT Number: Your internal purchase order number: Participation 11 October Tour of new SIQ premises Warm buffet dinner Comment Individual meeting needed: Yes, No Country: 12 October Seminar, 1st day Evening event, dinner VAT Payer: Yes, No Select one group for 2nd day: OFF MED Technical questions, topics for individual meetings, special requests, hotel bookings, etc. 13 October Seminar, 2nd day Afternoon tour HOUS TOOL Automotive Place, date: Signature: