B.Sc. Mechanical Engineering TIME TABLE

Size: px
Start display at page:

Download "B.Sc. Mechanical Engineering TIME TABLE"

Transcription

1 B.Sc. Mechanical Engineering SESSION th SEMESTER Revised w. e. f HMT - ICE 2- MM MM MM Lab FEA I&C Lab First Floor) ICE HMT Lab FEA MV Projects ICE Lab MV Research Projects Projects FEA lab (A) FEA lab (B) ICE IC Engines Dr. Shahid Imran ICE Lab IC Engines Lab Dr. Shahid Imran HMT Heat & Mass Transfer Dr. Fahad Noor HMT Lab MM Heat & Mass Transfer Lab Mechanics of Materials-III Dr. Fahad Noor Mr. Sajid Mehmood MM Lab MV Mechanics of Materials-III Lab Mechanical Vibration Mr. Sheeraz Ali /MED UET Lhr Mr. H.M.Shahid. Akbar FEA FEA Lab Finite Element Analysis Finite Element Analysis Lab Mr. Gulzar Ahmad Mr. Muhammad Moeen Sultan A= Even Roll Numbers B= Odd Roll Numbers

2 B.Sc. Mechanical Engineering SESSION th SEMESTER Revised w. e. f M-/MTM Lab Ground Floor) MD Lab (A) MD Lab (B) IE MTM EPC MD ES POM IE Lab MTM Lab MD ES MTM Machine Tools & Machining Mr. Faraz Fazal MTM Lab Machine Tools & Machining Lab Mr. Faraz Fazal MD Machine Design-II Mr. Sheeraz Ali MD Lab Machine Design-II Lab Mr. H.M.Shahid. Akbar EPC Environmental Engg. & Pollution Control Dr. Rauf Razaq POM Principles of Management Ms. Samina Ishaq IE Industrial Electronics Dr. Hafsa Shahid IE Lab Industrial Electronics Lab Mr. Farhan Butt ES Engineering Statistics Mr. Danish Ali Rana A= Even Roll Numbers B= Odd Roll Numbers Note: IE Lab will be held in electrical Engineering Department

3 B.Sc. Mechanical Engineering SMA M- First Floor) SMB M-5 First Floor) SESSION - 20 rd SEMESTER Revised w. e. f FM 2 FM Lab MM Lab CS Lab MM Lab CS Lab MM MM FM Lab FM 6 MP MP CS Lab FM MP MP CS Lab FM ISP MM 5 6 ISP MM ISP 2 MP Lab ISP MP Lab MP MP Lab Manufacturing Processes Manufacturing Processes Lab Capt. IA Hashmi Mr. Faraz Fazal /IME UET Lahore FM FM Lab Fluid Mechanics-I Fluid Mechanics-I Lab Ms. Anam Anwar Ms. Anam Anwar MM MM LAB Mechanics of Materials-I Mechanics of Materials-I Lab Mr. Sajid Mehmood Mr. Sajid Mehmood Applied Mathematics II Mr. Muhammad Usman ISP Islamic & Pak. Studies Dr Rashid Munir/ Dr. Obaidullah Ranjha t CS Lab Communication Skills-II Lab Ms. Saba Ajmal

4 B.Sc. Mechanical Engineering SESSION - 20 st SEMESTER Revised w. e. f FMA Seminar Hall Ground Floor) FMB FM Lab Ground Floor) TH Lab TH TH ISP ES ES Lab ES Lab ES ISP WT -6 WT -6 ES CS Lab 5 ES 2 CS Lab CS Lab CS Lab 2 TH ISP TH ISP TH Lab Faculty Member TH TH Lab Thermodynamics-I Thermodynamics-I Lab Mr. Adnan Qamar Mr. Gulzar Ahemad ES Engineering Statics Mr. Sheeraz Ali ES LAB Engineering Statics Lab Mr. Sheeraz Ali CS Lab Communication Skills-I Lab Ms. Saba Ajmal ISP Applied Mathematics I Islamic & Pak. Studies Mr. Abdul Manaf Dr Rashid Munir/ Dr. Obaidullah Ranjha WT Workshop Technology Mechanical Engineering Department UET Lahore Note: The Lectures of Thermodynamics Theory & Engineering Statics Theory of FMB will be held in seminar hall.

5 B.Sc. Mechanical Technology SESSION th SEMESTER Revised w. e. f CMM HMFP - ETC CMM HMT Lab Ground Floor) ICEO 2 ITU ITU ETC ETC Lab ICEO Lab ICEO ITU Lab HMFP Lab CMM Lab ETC Energy Technology & Conservation Mr. Gulzar Ahemad ETC LAB ICEO Energy Technology & Conservation Lab IC Engine Operations Mr. Gulzar Ahemad Dr. Shahid Imran ICEO LAB CMM IC Engine Operations Lab Condition Monitoring and Maintenance Dr. Shahid Imran Mr. Waqar Mushtaq CMM LAB Condition Monitoring and Maintenance Lab Mr. Waqar Mushtaq HMFP Heat and Mass flow processes Dr. Fahad Noor HMFP LAB Heat and Mass flow processes Lab Dr. Fahad Noor ITU ITU LAB Industrial Thermal Utilities Industrial Thermal Utilities Lab Mr. Faraz Fazal Mr. Faraz Fazal

6 B.Sc. Mechanical Technology HVAC LAB First Floor) SESSION th SEMESTER Revised w. e. f MT MT LAB HM HT HT MT IQC IT IQC Lab HM HT 2 HM LAB IQC 5 HT LAB IT LAB HM Hydraulics Machinery Ms. Anam Anwar HM Lab Hydraulics Machinery Lab Ms. Anam Anwar HT HVAC Technology Mr. Waqar Mushtaq HT Lab HVAC Technology Lab Mr. Waqar Mushtaq IT Instrumentation Technology Mr. Muhammad Moeen Sultan IT Lab Instrumentation Technology Lab Mr. Muhammad Moeen Sultan MT Machining Technology-I Capt. IA Hashmi MT Lab Machining Technology-I Lab Capt. IA Hashmi IQC Inspection and Quality Assurance Ms. Samina Ishaq IQC Lab Inspection and Quality Assurance Lab Ms. Samina Ishaq /IME. UET, Lahore

7 B.Sc. Mechanical Technology SESSION - 20 rd SEMESTER Revised w. e. f I (Admin TH Lab TH SOM Lab MT Block) CS Lab TH SOM CS Lab 5 Lab 5 SOM Lab Applied Mechanics Applied Mechanics Lab Mr. H.M.Shahid. Akbar Mr. H.M.Shahid. Akbar TH Thermodynamics for Technologist Ms. Adnan Qamar TH Lab Thermodynamics for Technologist Lab Ms. Adnan Qamar MT Materials Technology Mr. Faraz Fazal SOM SOM Lab Strength of Materials Strength of Materials Lab Ms. Samina Ishaq Ms. Samina Ishaq CS Lab Communication Skills-II Lab Ms. Sonia Ayesha Zafar

8 B.Sc. Mechanical Technology SESSION - 20 st SEMESTER Revised w. e. f TD CS Lab -II (Admin Block) TD Lab -5 CF CS Lab AC CF Lab AC Lab CF TD Technical Drawing Capt. IA Hashmi TD Lab Technical Drawing Lab Capt. IA Hashmi CF Computer Fundamentals Mr. Farrukh Shafeeque CF Lab Computer Fundamentals Lab Mr. Farrukh Shafeeque Applied Mathematics-I Mr. Muhammad Usman AC Applied Chemistry Dr. Samina Akber AC Lab Applied Chemistry Lab Dr. Samina Akber CS Lab Communication Skills-I Ms. Sonia Ayesha Zafar Note: CF Theory Lecture will be conducted in seminar hall of Electrical Engineering department

B.Sc. Mechanical Engineering TIME TABLE

B.Sc. Mechanical Engineering TIME TABLE B.Sc. Mechanical Engineering SESSION - 200 7 th SEMESTER Revised w. e. f. 09-09 20 FEA MV Lab M-2 Ground Floor) FEA HMT MV ICE 2-4 HMT FEA Lab (A) HMT Lab Projects ICE Lab FEA Lab (B) ICE IC Engines Prof.

More information

र ष ट र य प र द य ग क स स थ न प द च च र

र ष ट र य प र द य ग क स स थ न प द च च र FIRST SEMESTER - (2014 Regulation) HM101 MA101 PH101 CH101 CE101 CS101 CC101 ME101 COMMUNICATION IN ENGLISH I MATHEMATICS I PHYSICS I CHEMISTRY I ENGINEERING MECHANICS BASICS OF PROGRAMMING ENERGY & ENVIRONMENTAL

More information

Department of Mechanical Engineering

Department of Mechanical Engineering UNDERGRADUATE COURSES Curriculum for the Degree of Bachelor of Science in Mechanical Engineering: General s 6-0-05 6-0-0 6-0-04 6-0-05 6-0-0 6-0-0 5-0-7 5-0-0 5-0-0 5-0-0 5-0-04 6-0-4 6-0-0 6-0-0 6-0-0

More information

GOVERNMENT OF KERALA ABSTRACT

GOVERNMENT OF KERALA ABSTRACT GOVERNMENT OF KERALA ABSTRACT Higher Education Technical Equivalent / alternate subjects in Revision 2003 scheme to revised scheme and Revision 97 scheme Approved Orders issued HIGHER EDUCATION (L) DEPARTMENT

More information

What are the most likely employment avenues (industry and roles) from your discipline of engineering. What industry are you in now?

What are the most likely employment avenues (industry and roles) from your discipline of engineering. What industry are you in now? Chemical Chemical processes, heat and mass transfer, process units, distillation Oil and gas, environmental work, food, pharmaceuticals, manufacturing Last one was oil and gas 8 around 70k I think Chemical

More information

06 March Day Date All Streams. Thursday 03 May 2018 Engineering Mathematics II. Saturday 05 May 2018 Engineering Physics

06 March Day Date All Streams. Thursday 03 May 2018 Engineering Mathematics II. Saturday 05 May 2018 Engineering Physics / SCHOOL OF TECHNOLOGY MANAGEMENT &ENGINEERING FINAL EXAMINATION TIME TABLE (ACADEMIC YEAR: 2017 18) MASTER OF BUSINESS ADMINISTRATION IN TECHNOLOGY MANAGEMENT (2017-22) YEAR: I, SEMESTER: II CAMPUS: MUMBAI,

More information

MECHATRONIC ENGINEERING

MECHATRONIC ENGINEERING Contents TERMS OF REFERENCE 01 MANAGEMENT SCIENCES 02 COMPUTER SCIENCE 05 MECHATRONIC ENGINEERING 08 SOCIAL SCIENCES 10 EDUCATIONAL & LEADERSHIP MANAGEMENT 13 MEDIA SCIENCES 14 BIOSCIENCES 16 TERMS OF

More information

DATE & DAY MONDAY

DATE & DAY MONDAY JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD KUKATPALLY - HYDERABAD 500 085 E X A M I N A T I O N B R A N C H III YEAR B.TECH-I SEMESTER -R15 REGULATION- SUPPLEMENTARY EXAMINATIONS APRIL/MAY-2018

More information

2. The re-examination application link on the portal will be active during the below mentioned period:

2. The re-examination application link on the portal will be active during the below mentioned period: IMPORTANT INSTRUCTIONS TO CANDIDATES 1. All the eligible students who have enrolled in the Academic Year 2014-2015 onwards in the first year of the program are hereby informed to apply for the respective

More information

Rajasthan Technical University, Kota jktlfkku rduhdh fo'ofo ky;]dksvk

Rajasthan Technical University, Kota jktlfkku rduhdh fo'ofo ky;]dksvk Rajasthan Technical University, Kota jktlfkku rduhdh fo'ofo ky;]dksvk ATTENTION III SEM BACK STUENTS For all batches of III Semester of B.Tech./B.Arch. including Main, Back and old Back, there shall be

More information

GUJARAT TECHNOLOGICAL UNIVERSITY

GUJARAT TECHNOLOGICAL UNIVERSITY Subject Code Subject Name Date Time Branch 01: Aeronautical Engineering 160101 Aerodynamics-II 27-11-2013 02:30 To 05:00 160102 Fundamentals of Jet Propulsion 29-11-2013 02:30 To 05:00 160103 Vibration

More information

Bachelor of Engineering (Honours) (Mechatronic) / Bachelor of Mathematical and Computer Sciences (BE(Hons)(Mecht) BMaCompSc)

Bachelor of Engineering (Honours) (Mechatronic) / Bachelor of Mathematical and Computer Sciences (BE(Hons)(Mecht) BMaCompSc) Bachelor of Engineering (Honours) (Mechatronic) / Bachelor of Mathematical and Computer Sciences (BE(Hons)(Mecht) BMaCompSc) 2015 These Program Rules should be read in conjunction with the University's

More information

B.TECH/MCA DECEMBER 2016

B.TECH/MCA DECEMBER 2016 BIPIN TRIPATHI KUMAON INSTITUTE OF TECHNOLOGY DWARAHAT Schedule for THEORY PAPER EXAMINATIONS ODD SEMESTERS 2016-17 (REGULAR/BACK) B.TECH/MCA DECEMBER 2016 TENTATIVE SCHEDULE FOR THE END SEMESTER EXAMINATION

More information

GUJARAT TECHNOLOGICAL UNIVERSITY

GUJARAT TECHNOLOGICAL UNIVERSITY 01 Aeronautical 160101 Aerodynamics-II 16/05/2011 160102 Fundamantals of Jet Propulsion 17/05/2011 160103 Vibration and Noise Control 19/05/2011 160104 Basic Control Theory 21/05/2011 160105 Computational

More information

Structural Analysis Control System Engineering Cim Elective I Computer Graphics for Cad/Cam. Advanced in Operating System Design

Structural Analysis Control System Engineering Cim Elective I Computer Graphics for Cad/Cam. Advanced in Operating System Design Sr No Name of Branch RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY **** MTECH,ME,MDES, MARCH FIRST SEMESTER EXAMINATION OF summer 2015 # PROGRAMME( WRITTEN ) # MTech,ME,MDes,MArch FIREST SEMESTERsummer

More information

B.TECH/MCA DECEMBER 2017

B.TECH/MCA DECEMBER 2017 BIPIN TRIPATHI KUMAON INSTITUTE OF TECHNOLOGY DWARAHAT Schedule for THEORY PAPER EXAMINATIONS ODD SEMESTERS 2017-18(REGULAR/BACK) B.TECH/MCA DECEMBER 2017 TENTATIVE SCHEDULE FOR THE END SEMESTER EXAMINATION

More information

Mechanical Engineering

Mechanical Engineering Mechanical Engineering 1 Mechanical Engineering Degree Awarded Bachelor of Science in Mechanical Engineering Nature of Program Mechanical engineering is one of the largest technical professions with a

More information

Annexure D-I EVEN. Mapping of Courses vs CLOs vs PLOs

Annexure D-I EVEN. Mapping of Courses vs CLOs vs PLOs Mapping of Courses vs s vs Spring Semester (EVEN) TE 111 Textile Chemistry Process sufficient knowledge of Chemistry required to pursue in chemical processing. PO1 Determine physical/chemical properties

More information

OSMANIA UNIVERSITY No.14 /BE/Exams/TT TIME-TABLE

OSMANIA UNIVERSITY No.14 /BE/Exams/TT TIME-TABLE B.E. I/IV (Reg.) & (Suppl.) EXAMINATIONS: Nov./Dec., 2013 Time: 02.00 p.m. to 5.00 p.m. Subject 05-12-2013 English 09-12-2013 Mathematics I 12-12-2013 Mathematics II 17-12-2013 Physics 20-12-2013 Chemistry

More information

(New and Old Syllabus)

(New and Old Syllabus) First Semester B.E. Compartmental Examinations, August-September 2018 (New and Old Syllabus) PROGRAM (Written) 04.09.18 Tuesday All Eng Communication and Tech report Writing(O)/ Technical Report Writing

More information

U N I V E R S I T Y O F C A L I C U T Pareeksha Bhavan

U N I V E R S I T Y O F C A L I C U T Pareeksha Bhavan U N I V E R S I T Y O F C A L I C U T Pareeksha Bhavan REVISED TIME TABLE FOR THE SEVENTH SEMESTER B.Tech/ P T B.Tech (2009 SCHEME) REGULAR / SUPPLEMENTARY / EXAMINATIONS NOVEMBER 2016 Time of Examination:

More information

Engineering Department. Ocean Panel

Engineering Department. Ocean Panel Mechanical Engineering g Faculty Automotive, Aeronautical & Ocean Engineering Department Ocean Panel innovative. entrepreneurial. global innovative. entrepreneurial. global Ocean Panel Assoc. Prof. Dr

More information

Continued to page No. 13. Gazette of India No. 651, dated July, 24, 2017

Continued to page No. 13. Gazette of India No. 651, dated July, 24, 2017 Annexure - 1 Continued to page No. 13 Gazette of India No. 651, dated July, 24, 2017 of Annexure 2 Details of desired Specializations required in various departments S.No. Name of the Department Desired

More information

END EXAMINATION TIME TABLE OF II-B.TECH-I-SEM-R07-SUPPLE-NOV-DEC 2016 Examination Timings: A.M. To P.M.

END EXAMINATION TIME TABLE OF II-B.TECH-I-SEM-R07-SUPPLE-NOV-DEC 2016 Examination Timings: A.M. To P.M. JYOTHISHMATHI INSTITUTE OF TECHNOLOGY & SCIENCE KARIMNAGAR 505 481. DATE & DAY 21-11-2016 23-11-2016 25-11-2016 29-11-2016 01-12-2016 03-12-2016 (Saturday) END EXAMINATION TIME TABLE OF II-B.TECH-I-SEM-R07-SUPPLE-NOV-DEC

More information

GUJARAT TECHNOLOGICAL UNIVERSITY

GUJARAT TECHNOLOGICAL UNIVERSITY 01 AERONAUTICAL 160101 AERODYNAMICS-II 160102 FUNDAMANTALS OF JET PROPULSION 160103 VIBRATION AND NOISE CONTROL 160104 BASIC CONTROL THEORY 160105 COMPUTATIONAL FLUID DYANAMICS -II 160106 AVIONICS 02 AUTOMOBILE

More information

THE NATIONAL INSTITUTE OF ENGINEERING, Mysore UG - Semester End Examination Schedule - December 2014

THE NATIONAL INSTITUTE OF ENGINEERING, Mysore UG - Semester End Examination Schedule - December 2014 5/12/2014 1 1 1 CV0413 Quantity Surveying & Estimation Computer Concept & C Programming CV0418/CV0501 Mechanics of Deformable Bodies CV0419/CV0201 Building Materials & Construction CV0420/CV0402 Mechanics

More information

Programme Specifications B. Tech. Programme Programme: Mechanical Engineering Department: Mechanical and Manufacturing Engineering

Programme Specifications B. Tech. Programme Programme: Mechanical Engineering Department: Mechanical and Manufacturing Engineering Programme Specifications B. Tech. Programme Programme: Mechanical Department: Mechanical and Manufacturing Faculty of & Technology M. S. Ramaiah University of Applied Sciences University House, New BEL

More information

JNTUH COLLEGE OF ENGINEERING (Autonomous) EXAMINATIONS BRANCH, HYDERABAD - 85

JNTUH COLLEGE OF ENGINEERING (Autonomous) EXAMINATIONS BRANCH, HYDERABAD - 85 Branch : COMPUTER SCIENCE Passed in Subject: (CS701) ADVANCED PROBLEM SOLVING Passed in Subject: (CS711) ADVANCED DATA STRUCTURES & ALGORITHMS 14011D0518 Passed in Subject: (CS712) ADVANCED DATABASE ENGINEERING

More information

Mr. S M Irfan Aqueel,CEO, receiving the Chief Guest. Mr. Abdul Razak Dawood testing the Export Tractor Model

Mr. S M Irfan Aqueel,CEO, receiving the Chief Guest. Mr. Abdul Razak Dawood testing the Export Tractor Model MILLAT EXPORTS CELBRATION CEREMONY FACTORY PREMISES, SHEIKHUPURA ROAD, LAHORE 7 TH DECEMBER, 2018 Millat Tractors Limited celebrated its success in the exports of its products to the global markets. In

More information

Mr. Sikandar Mustafa Khan (Chairman / Non-Executive Director-MTL Nominee)

Mr. Sikandar Mustafa Khan (Chairman / Non-Executive Director-MTL Nominee) Mr. Sikandar Mustafa Khan (Chairman / Non-Executive Director-MTL Nominee) Mr. Sikandar Mustafa Khan graduated as Mechanical Engineer from NED University of Engineering & Technology, Karachi in 1967. He

More information

courses from Engineering disciplines (EC,CS,ME) courses from Engineering disciplines Professional Ele: Professional courses

courses from Engineering disciplines (EC,CS,ME) courses from Engineering disciplines Professional Ele: Professional courses UG CURRICULUM GUIDELIENS Total Credit in BTech 160 81 Professional core: 33 courses from disciplines (EC,CS,ME) courses from disciplines Professional Ele: 34-38 Professional courses (EC,CS,ME) Project:

More information

An Interview with. Ms. ROSHAN ARA

An Interview with. Ms. ROSHAN ARA An Interview with Ms. ROSHAN ARA Development Advisor, Trade and Economic Cooperation European Union Delegation to Pakistan How have you found SWITCH-Asia SPRING team working on this project as compared

More information

6. RAFIQUE MUHAMMAD KHAN TAHIR MANAGER ACCOUNTS B. COM (HONS), M.COM.

6. RAFIQUE MUHAMMAD KHAN TAHIR MANAGER ACCOUNTS B. COM (HONS), M.COM. IVCC-KEY PERSONNEL 1. LT COL (RETD) CHOWDERY M. ANIS AHMED, PE CHAIRMAN B.SC (Civil Engineering) - 1963, MIE (PAK) Diploma Advance Management (PIM) - 1977. A graduate from the Royal Military Academy Sandhurst

More information

1. SALIENT FEATURES OF THE CURRICULUM FOR DIPLOMA COURSE IN TEXTILE PROCESSING. 1. Name of the Programme : Diploma in Textile Processing

1. SALIENT FEATURES OF THE CURRICULUM FOR DIPLOMA COURSE IN TEXTILE PROCESSING. 1. Name of the Programme : Diploma in Textile Processing 1 1. SALIENT FEATURES OF THE CURRICULUM FOR DIPLOMA COURSE IN TEXTILE PROCESSING 1. Name of the Programme : Diploma in Textile Processing 2. Duration of the Programme : Three Years 3. Entry Qualifications

More information

SHARDA UNIVERSITY SCHOOL OF ENGINEERING & TECHNOLOGY DEPARTMENT OF MECHANICAL & AUTOMOBILE ENGINEERING

SHARDA UNIVERSITY SCHOOL OF ENGINEERING & TECHNOLOGY DEPARTMENT OF MECHANICAL & AUTOMOBILE ENGINEERING Program/Branch:B.Tech. (Mechanical Engg.) Term: I (1 st Year) Session: 2014-15 s L T P Credits Remarks 1. ENG102 FUNCTIONAL ENGLISH-I 2 0 0 2 2. MTH112 MATHS-I 3 2 0 4 3. PHY111 PHYSICS-I 3 1 0 4 4. CSE105

More information

SAVITRIBAI PHULE PUNE UNIVERSITY

SAVITRIBAI PHULE PUNE UNIVERSITY S- 165/2014 SAVITRIBAI PHULE PUNE UNIVERSITY EXAMINATION CIRCULAR No. 165 of 2014 Programme of the M.E. 2013 Credit Pattern (Sem. I & II ) (All Branches) Examination, Nov. - 2014. Instructions to the Candidates:

More information

OSMANIA UNIVERSITY No. 33/BE/Exams/TT/ REVISED TIME-TABLE

OSMANIA UNIVERSITY No. 33/BE/Exams/TT/ REVISED TIME-TABLE OSMANIA UNIVERSITY Page No: 6/11 B.E. I/IV (Main&Backlog) EXAMINATIONS: APR/MAY, 2014 Time: 10.00 a.m. to 1.00 p.m. Date Subject 09-06-2014 English 11-06-2014 Mathematics I 13-06-2014 Mathematics II 18-06-2014

More information

Essentia Technologies PVT Ltd. RSM Avais Hyder Liaquat Nauman. Zahid Jamil & Co. Chartered Accountants. Parker Randall A.J.S, Chartered Accountants

Essentia Technologies PVT Ltd. RSM Avais Hyder Liaquat Nauman. Zahid Jamil & Co. Chartered Accountants. Parker Randall A.J.S, Chartered Accountants PAKISTAN ATE LISTING The information below lists all ICAEW authorised training employers that have agreed for their details to be made available in 2017. Inclusion on this list does not mean that employers

More information

Theory Examination Date Sheet for Diploma Courses Session Nov-Dec, Time: 11:00AM (Friday Timing: 10:00AM)

Theory Examination Date Sheet for Diploma Courses Session Nov-Dec, Time: 11:00AM (Friday Timing: 10:00AM) Class: 1 st Semester 15/12/2018 20/12/2018 26/12/2018 31/12/2018 04/01/2019 09/01/2019 ALL BRANCHS ECEPT MLT, OMCA, TT, TD, ARCH App. Physics-I Theory Examination Sheet for Diploma Courses Session Nov-Dec,

More information

Department of Knitting National Textile University, Faisalabad

Department of Knitting National Textile University, Faisalabad Department of Knitting National Textile University, Faisalabad Introduction: Established in 2010, the department of Knitting is an independent department that focuses its activities on the training of

More information

Mechanical Engineering

Mechanical Engineering Mechanical Engineering-1 Undergraduate Bulletin 2018-2019 Mechanical Engineering Faculty: Paliwal, Chair, Facas, Grega, Sepahpour, Shih, Wang, Yan The Department of Mechanical Engineering offers an academic

More information

OSMANIA UNIVERSITY No.15 /BE/Exams/TT TIME-TABLE

OSMANIA UNIVERSITY No.15 /BE/Exams/TT TIME-TABLE No.15 /BE/Exams/TT2012 05-04-2013 TIME-TABLE B.E. I/IV (REGULAR) (Main) EXAMINATIONS: MAY/JUNE, 2013 Time: 10.00 a.m. to 1.00 p.m. Subject 04-06-2013 11-0-2013 15-06-2013 20-06-2013 24-06-2013 26-06-2013

More information

IDEAL EDUCATION MANAGEMENT &TECHNOLOGY

IDEAL EDUCATION MANAGEMENT &TECHNOLOGY Diploma in Electrical Engineering (DEE) Subjects Covered Electrical Engg. Electric Circuit Power Generation Basic Electronics Solid State Devices & Circuits Switching Theory & Logic Design Electro Magnetic

More information

Subject. Practical Papers 1"^ Sitting 2*^ Sitting. Theory Papers. Sixbject. Advance Library Classification Lab. Office Equipment & Services Lab

Subject. Practical Papers 1^ Sitting 2*^ Sitting. Theory Papers. Sixbject. Advance Library Classification Lab. Office Equipment & Services Lab Semester V Diploma M.T. (Library Science) and MT. (Modern Office Practice), T.T. (Costume Design & Garment Making) and Architectural Assistantship Examination 2016 (Odd) 16.01.2017 to Sixbject Practical

More information

MAULANA ABUL KALAM AZAD UNIVERSITY OF TECHNOLOGY.WEST BENGAL Routine for 7th Semester Theory Examination Page-1

MAULANA ABUL KALAM AZAD UNIVERSITY OF TECHNOLOGY.WEST BENGAL Routine for 7th Semester Theory Examination Page-1 Page-1 DATE-05/12/2017 DAY-1 TIME-10.00AM-1.00PM HALF-1ST 1 CSE (NEW) CS701 Software Engg. 1A CSE (OLD) CS701 Language Processor 2 IT(NEW) IT701 Internet Technology 2A IT(OLD) IT701 Internet working 3

More information

Business Economics & Accountancy [201-S] Principles of Management-II [211-S] Business Statistics-I [212-S] Conversational English-I [213-S]

Business Economics & Accountancy [201-S] Principles of Management-II [211-S] Business Statistics-I [212-S] Conversational English-I [213-S] Programme for the Diploma in /Technology (Fulltime Course) Part-I 2nd Semester Examination - June 2014 (For REGULAR students) Date Time All Branches except ARCH, MOPM, MT, PHO, DP ARCH MOPM MT PHO DP 04.06.2014

More information

ICE028 Instrumentation for Non- Instrumentation Engineer

ICE028 Instrumentation for Non- Instrumentation Engineer ICE028 Instrumentation for Non- Instrumentation Engineer H.H. Sheikh Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction: Instrumentation is the science

More information

Mechanical Engineering BSc 1st year 2nd Semester February 2016

Mechanical Engineering BSc 1st year 2nd Semester February 2016 Mechanical Engineering BSc 1st year 2nd Semester February 2016 Time Monday Tuesday Wednesday Thursday Friday 8:00-8:50 9:00-9:50 10:00-10:50 11:00-11:50 MFMAB32G03- Technical Drawing, Seminar, Dr. Pálinkás

More information

BOARD OF TECHNICAL EDUCATION, UTTAR PRADESH Question Paper Account for Special Back Paper Examination (December Exam)

BOARD OF TECHNICAL EDUCATION, UTTAR PRADESH Question Paper Account for Special Back Paper Examination (December Exam) Page 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 0001 DESIGN OF STEEL & MASONARY STRUCTURES 0002 TRANSPORTATION ENGINEERING 0003 DESIGN OF

More information

KURUKSHETRA UNIVERSI TY KURUKSHETRA. REVISED Date-Sheet for B.Tech. Engineering Ist Semester Examination commencing w.e.f

KURUKSHETRA UNIVERSI TY KURUKSHETRA. REVISED Date-Sheet for B.Tech. Engineering Ist Semester Examination commencing w.e.f UNIVERSI TY REVISED Date-Sheet for B.Tech. Ist Semester Examination commencing w.e.f. 7.1.2012. Time of Examination: 2.00 P.M. onwards (Evening Session) DATE AND DAY REFERENCE NO./SUBJECT AND PAPER JANUARY,

More information

Monday Center for the Examination will be as under

Monday Center for the Examination will be as under NORTH MAHARASHTRA UNIVERSITY, JALGAON Circular No.157 of 2018 Programme of the M. E. (All Branches) Examinations May, 2018 1. Candidates are required to be present at their respective places of the Examinations

More information

Nandha Engineering College (Autonomous) Erode Examination -Sep 2018 Department Wise Time Table

Nandha Engineering College (Autonomous) Erode Examination -Sep 2018 Department Wise Time Table B.E - Computer Science and Engineering F.N: 09.30 AM to 12.30 PM A.N: 01.30 AM to 04.30 PM Date Session Code Subject 14-11-2018 FN 13CSX08 Network Analysis and Management AN 13CSX15 Software Testing Methodologies

More information

Pakistan Leadership Conversation Collective vision for an Emerging Pakistan

Pakistan Leadership Conversation Collective vision for an Emerging Pakistan Pakistan Leadership Conversation 2018 Collective vision for an Emerging Pakistan #PLC2018 1 Starting the conversation... Forming a collective vision, driving actionable agenda PLC is a series of conferences

More information

The Open University of Sri Lanka

The Open University of Sri Lanka The Open University of Sri Lanka The Open University of Sri Lanka (OUSL) was established in 1980 under the University Act No.16 of 1978. It has the same legal and academic status as any other national

More information

BIOMEDICAL ELECTRONICS. Date & Day II - SEMESTER ADVANCED MEDICAL IMAGING DIAGNOSTIC AND THERAPEUTIC EQUIPMENT MEDICAL PRODUCT DESIGN

BIOMEDICAL ELECTRONICS. Date & Day II - SEMESTER ADVANCED MEDICAL IMAGING DIAGNOSTIC AND THERAPEUTIC EQUIPMENT MEDICAL PRODUCT DESIGN OSMANIA UNIVERSITY, HYDERABAD - 7 M. E. (BME) (Main) Examination, September 2013 EXAMINATION TIME TABLE Time : 2.00 PM to 5.00 PM Department of BME Date & Day BIOMEDICAL ELECTRONICS II - SEMESTER ADVANCED

More information

Mechanical Engineering Department UET KSK WON All Pakistan AirEx 12 Innovation GIKI

Mechanical Engineering Department UET KSK WON All Pakistan AirEx 12 Innovation GIKI Mechanical Engineering Department UET KSK WON All Pakistan AirEx 12 Innovation Challenge @ GIKI The students of Mechanical Engineering Department KSK Campus, UET have won the Air Ex 12 Innovation Challenge

More information

B.TECH(MECHANICAL) -SEDA

B.TECH(MECHANICAL) -SEDA B.TECH(MECHANICAL) -SEDA PROGRAMME EDUCATIONAL OBJECTIVES: PEO1 PEO2 PEO3 PEO4 PEO5 Will be equipped with sound knowledge of mathematics, science and technology useful to build complex mechanical engineering

More information

CURRICULUM VITAE.

CURRICULUM VITAE. April, 2017 CURRICULUM VITAE Engr. Dr. Zahoor Uddin Assistant Professor COMSATS Institurte of Information Technology, Electrical Engineering Department, Wah Campus, Pakistan zahooruddin79@gmail.com zahooruddin@ciitwah.edu.pk

More information

WEST BENGAL UNIVERSITY OF TECHNOLOGY Routine for 7th Semester Theory Examination 2013 Page-1 DATE-04/12/2013 DAY-1 TIME-10.00AM-1.

WEST BENGAL UNIVERSITY OF TECHNOLOGY Routine for 7th Semester Theory Examination 2013 Page-1 DATE-04/12/2013 DAY-1 TIME-10.00AM-1. Page-1 DATE-04/12/2013 DAY-1 TIME-10.00AM-1.00PM HALF-1ST 1 CSE (NEW) CS701 Software Engg. 1A CSE (OLD) CS701 Language Processor 2 IT(NEW) IT701 Internet Technology 2A IT(OLD) IT701 Internetworking 3 ECE(NEW)

More information

Hydro Mechanics & Water Resources Engineering. Water. Management PTPG IV - Semester. PTPG IV - Semester Pre stressed Concrete

Hydro Mechanics & Water Resources Engineering. Water. Management PTPG IV - Semester. PTPG IV - Semester Pre stressed Concrete Date and Day Pre stressed UNIVERSITY COLLEGE OF ENGINEERING (Autonomous) OSMANIA UNIVERSITY M. E. (Civil) ( & ) and IV-Semester () Main Examination September 2012 EXAMINATION TIME TABLE Structural Prestressed

More information

VELTECH HIGHTECH DR RANGARAJAN DR SAKUNTHALA ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING ODD SEMESTER TIME TABLE

VELTECH HIGHTECH DR RANGARAJAN DR SAKUNTHALA ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING ODD SEMESTER TIME TABLE ELTECH HIGHTECH DR RANGARAJAN DR SAKUNTHALA ENGINEERING COLLEGE COURSE: B.E(MECHANICAL) YEAR/SEC: II/A CLASS ADISOR: Mrs.N.GAYATHRI ROOM NO: M202 I TPDE ETD (MT-I LAB) F MT-I () (F) EDC II (ETD) (MT-I)

More information

B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session

B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session NA UNIVERSITY, CHENNAI - 600 5 APRIL/MAY- 28 For candidates admitted in Anna University,Chennai during Academic Years 21,22 & 23 PTCE22 PTGE2111 PTCE2254 PTCE22 PTCE2252 PTCE23 PTCE2255 PTGE21 PTCE2251

More information

ICE065 Practical Process Control & Instrumentation:

ICE065 Practical Process Control & Instrumentation: ICE065 Practical Process Control & Instrumentation: Measurement & Sensors H.H. Sheikh Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction: Globalization

More information

MFGE Manufacturing Engineering

MFGE Manufacturing Engineering MFGE Manufacturing Engineering 1 MFGE Manufacturing Engineering MFGE 2142 Fundamentals of Engineering Mechanics 4 Credit Hours. 0,3 Lecture Hours. 0,2 Lab Hours. This course provides an introductory survey

More information

Canadian Technology Accreditation Criteria (CTAC) MECHANICAL ENGINEERING TECHNOLOGY - TECHNOLOGIST (METY 2015)

Canadian Technology Accreditation Criteria (CTAC) MECHANICAL ENGINEERING TECHNOLOGY - TECHNOLOGIST (METY 2015) Preamble Canadian Technology Accreditation Criteria (CTAC) MECHANICAL ENGINEERING TECHNOLOGY - TECHNOLOGIST (METY 2015) These CTAC are applicable to programs having titles involving Mechanical Engineering

More information

B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session

B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session NA UNIVERSITY, CHENNAI - 600 5 NOVEMBER/DECEMBER- 27 For candidates admitted in Anna University,Chennai during Academic Years 21,22 & 23 PTCE22 PTGE2111 PTCE2254 PTCE22 PTCE2252 PTCE23 PTCE2255 PTGE21

More information

CONTROLLER OF EXAMINATIONS. B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session

CONTROLLER OF EXAMINATIONS. B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session NA UNIVERSITY, CHENNAI - 600 5 NOVEMBER/DECEMBER- 28 For candidates admitted in Anna University,Chennai during Academic Years 22 & 23 PTCE22 PTGE2111 PTCE22 PTCE2252 PTCE2254 PTCE23 PTCE2255 PTGE21 PTCE2251

More information

Mathematical Modeling of Current Harmonics Caused by Personal Computers

Mathematical Modeling of Current Harmonics Caused by Personal Computers nternational Journal of Electrical and Computer Engineering 3:14 008 Mathematical Modeling of Current Harmonics Caused by Personal Computers Rana Abdul Jabbar Khan, and Muhammad Akmal Abstract Personal

More information

Experiment DC-DC converter

Experiment DC-DC converter POWER ELECTRONIC LAB Experiment-7-8-9 DC-DC converter Power Electronics Lab Ali Shafique, Ijhar Khan, Dr. Syed Abdul Rahman Kashif 10/11/2015 This manual needs to be completed before the mid-term examination.

More information

Clarkson University Knowledge Area Listing Spring 2018 Report Date: 11/09/2017 Page 1

Clarkson University Knowledge Area Listing Spring 2018 Report Date: 11/09/2017 Page 1 Area Listing Page 1 CGI ANTH 201 Intro to Cultural Anthropology CGI ANTH 225 Global Persp on Sexuality CGI ANTH 240 Ethnographic Perspective CGI BY 490 Project in Bioscience C1 CGI COMM 310 Mass Media

More information

A Publicly Available RGB-D Data Set of Muslim Prayer Postures Recorded Using Microsoft Kinect for Windows

A Publicly Available RGB-D Data Set of Muslim Prayer Postures Recorded Using Microsoft Kinect for Windows J Basic Appl Sci Res, 4(7)115-125, 2014 2014, TextRoad Publication ISSN 2090-4304 Journal of Basic and Applied Scientific Research wwwtextroadcom A Publicly Available RGB-D Data Set of Muslim Prayer Postures

More information

CE S3. CE2050: Functional Design. CE2010: Strength of Materials (125) EE2010: Basic Electrical Engg. (18) CE2030: Materials and Construction

CE S3. CE2050: Functional Design. CE2010: Strength of Materials (125) EE2010: Basic Electrical Engg. (18) CE2030: Materials and Construction CE All Sem Courses shared by more than 3 disciplines and ideally can not be changed Courses shared by 2 disciplines and could be changed after a mutual agreement Room allocation is indicated within brackets

More information

Time Table for Spring Semester (January-April) ME UG ( ) Course, ME PG ( ) courses COURSE NO. COURSE NAME INSTRUCTOR ROOM NO.

Time Table for Spring Semester (January-April) ME UG ( ) Course, ME PG ( ) courses COURSE NO. COURSE NAME INSTRUCTOR ROOM NO. Time Table for Spring Semester (January-April) ME UG (200-400) Course, ME PG (600-700) courses COURSE NO. COURSE NAME INSTRUCTOR ROOM NO. Remarks SLOT 1 1A (M 8.30-9.25), 1B (Tu 9.30-10.25), 1C (Th 10.35-11.30)

More information

Course code Title Description Type

Course code Title Description Type 1st Semester 3М11OP01 3M21OM01 3M22OM01 3M23IND01 Mathematics for engineering Technical mechanics Materials and joining techniques Graphical communication 3M31IND01 Industrial design 1 Introduction to

More information

International Office Date: FACT SHEET 2019/2020 The University Name Erasmus Code City, Country Website Technische Hochschule Lübeck D LUBECK03 Lübeck, Germany http://www.th-luebeck.de Address Mönkhofer

More information

Advanced Machine Shop Practice. MFGE 258: Manufacturing Methods and Materials I. Advanced Manufacturing Technology Theory and Practice AND

Advanced Machine Shop Practice. MFGE 258: Manufacturing Methods and Materials I. Advanced Manufacturing Technology Theory and Practice AND NGEE ANN POLYTECHNIC - DIPLOMA IN MECHANICAL ENGINEERING Advanced Machine Shop Practice Advanced Manufacturing Technology Theory and Practice WICHITA STATE UNIVERSITY MFGE 258: Manufacturing Methods and

More information

A MODERN UNDERGRADUATE MECHANICAL ENGINEERING LABORATORY. Introduction

A MODERN UNDERGRADUATE MECHANICAL ENGINEERING LABORATORY. Introduction A MODERN UNDERGRADUATE MECHANICAL ENGINEERING LABORATORY Charles Knight 1 and Gary McDonald 2 Abstract The senior mechanical engineering laboratory curriculum at The University of Tennessee at Chattanooga

More information

Performance Parameters Analysis of Three phase Full Controlled Converter using PSIM Simulation

Performance Parameters Analysis of Three phase Full Controlled Converter using PSIM Simulation Performance Parameters Analysis of Three phase Full Controlled Converter using PSIM Simulation S.Vivekanandan 1 G.Saravanan 1 P.Kamalakannan 1 S.Krishnaprabhu 1 1 Assistant professors, EEE Department,

More information

Assistant Professor, June 2008 Sep The Hashemite University, Jordan

Assistant Professor, June 2008 Sep The Hashemite University, Jordan EDUCATION Suleiman Obeidat, Ph.D. Department of Engineering Technology & Industrial Distribution Manufacturing & Mechanical Engineering Technology Program Texas A&M University, College Station, TX 77843

More information

National Institute of Technology, Hamirpur (H.P) Date Sheet of B. Tech. 1 st Year, 1 st Semester [Supplementary Examination, July 2018]

National Institute of Technology, Hamirpur (H.P) Date Sheet of B. Tech. 1 st Year, 1 st Semester [Supplementary Examination, July 2018] National Institute of Technology, Hamirpur (H.P)-177 005 Date Sheet of B. Tech. 1 st Year, 1 st Semester [Supplementary xamination, July 2018] Sessions and Timings: vening: 02.00 PM to 05.00 PM Date (Session)

More information

1. SALIENT FEATURES OF THE DIPLOMA PROGRAMME IN MECHANICAL ENGINEERING (TOOL AND DIE)

1. SALIENT FEATURES OF THE DIPLOMA PROGRAMME IN MECHANICAL ENGINEERING (TOOL AND DIE) 1. SALIENT FEATURES OF THE DIPLOMA PROGRAMME IN MECHANICAL ENGINEERING (TOOL AND DIE) 1) Name of the Programme : Diploma Programme in Mechanical Engineering (Tool and Die) 2) Duration of the Programme

More information

GUJARAT TECHNOLOGICAL UNIVERSITY. SEMESTER - II TEACHING SCHEME(IN Total EXAMINATION SCHEME COURSE COURSE TITLE CODE L T P

GUJARAT TECHNOLOGICAL UNIVERSITY. SEMESTER - II TEACHING SCHEME(IN Total EXAMINATION SCHEME COURSE COURSE TITLE CODE L T P GUJARAT TECHNOLOGICAL UNIVERSITY BRANCH :02 BRIDGE FOR DIPLOMA PROGRAMME IN AUTOMOBILE ENGINEERING C320201 THERMODYNAMICS & HYDRAULICS 21 10 0 31 70 30 0 0 100 TOTAL 49 10 0 59 140 60 0 0 200 BRANCH :03

More information

Prof. Dr. Iftikhar Hussain

Prof. Dr. Iftikhar Hussain Name Personal Experience Honor and Awards Prof. Dr. Iftikhar Hussain Vice Chancellor University of Engineering & Technology Peshawar, Pakistan Tel. +92-91-9216493 (office) Mobile: +92-3342425194 Fax: +92-91-9216663

More information

Practical Papers 1 st Sitting 2 nd Sitting. Theory Papers. (ii) Fashion Apparle (C.D.G.M.) :00 P.M. to 5:00 P.M.

Practical Papers 1 st Sitting 2 nd Sitting. Theory Papers. (ii) Fashion Apparle (C.D.G.M.) :00 P.M. to 5:00 P.M. STATE BOARD OF TECHNICAL EDUCATION, BIHAR Part III Diploma Library Science, Modern Office Practice and Costume Design & Garment Making Supplementary Examination 2012 (S) EXAMINATION PROGRAMME Date Time

More information

COMPUTER SCIENCE AND ENGINEERING

COMPUTER SCIENCE AND ENGINEERING COMPUTER SCIENCE AND ENGINEERING Internet of Thing Cloud Computing Big Data Analytics Network Security Distributed System Image Processing Data Science Business Intelligence Wireless Sensor Network Artificial

More information

Governance Structure of SBP Banking Services Corporation

Governance Structure of SBP Banking Services Corporation Governance Structure of SBP Banking Services Corporation SBP Banking Services Corporation (SBP BSC) was established as a wholly-owned subsidiary of State Bank of Pakistan, under the SBP Banking Services

More information

List of Electives. M.TECH.& M.E.II Sem.

List of Electives. M.TECH.& M.E.II Sem. List of Electives. M.TECH.& M.E.II Sem. Sr. No. 1. Name of Branch Structure 1.Advanced Steen Design 2.Design of Earthquake Resistant Structures 3.Design Environmental Structures I V 2. Computer Aided Design

More information

Lab Report 1 Single Phase Transformer

Lab Report 1 Single Phase Transformer Abu Dhabi University EEN 340 - Energy Conversion Lab Report 1 Single Phase Transformer Author: Muhammad Obaidullah 1030313 Ali Raza 1012542 Abdulla Ibrahim Hammoud 1002480 Supervisor: Dr. Muhammad Akmal

More information

SAVITRIBAI PHULE PUNE UNIVERSITY

SAVITRIBAI PHULE PUNE UNIVERSITY SAVITRIBAI PHULE PUNE UNIVERSITY (Formerly University of Pune) EXAMINATION CIRCULAR NO.29 OF.2018 SECOND YEAR(2008,2012/2014 & 2015 COURSE)ENGINEERING Examination of APR/MAY-2018 (Under Faculty of SCIENCE

More information

Day & Date Course No. Branch. EN Engineering Physics

Day & Date Course No. Branch. EN Engineering Physics 1 MAHATMA GANDHI UNIVERSITY TIMETABLE FOR B.TECH DEGREE EXAMINATIONS, MAY/JUNE2018 Ref: Notification No. EA I/1/352/2018 dated 23.03.2018 Semester I & II (New Scheme) (2010 -Admission onwards - Supplementary)

More information

HEATING, VENTING, AIR CONDITIONING, AND REFRIGERATION TECHNOLOGY BAS

HEATING, VENTING, AIR CONDITIONING, AND REFRIGERATION TECHNOLOGY BAS Heating, Venting, Air Conditioning, and Refrigeration Technology BAS 1 HEATING, VENTING, AIR CONDITIONING, AND REFRIGERATION TECHNOLOGY BAS The Heating, Venting, Air Conditioning, and Refrigeration (HVACR)

More information

Principles of Engineering

Principles of Engineering Principles of Engineering 2004 (Fifth Edition) Clifton Park, New York All rights reserved 1 The National Academy of Sciences Standards: 1.0 Science Inquiry 1.1 Ability necessary to do scientific inquiry

More information

Virtual Manufacturing Laboratory:

Virtual Manufacturing Laboratory: Virtual Manufacturing Laboratory: Desktop PC (Core i5)-3 nos. Software: 1. IGRIP Interactive Graphics Robot Instruction Programme. (Stratasys, Model-Objet. 30) 2. QUEST- Queuing vent Simulation (Deneb

More information

STATE BOARD OF TECHNICAL EDUCATION, BIHAR

STATE BOARD OF TECHNICAL EDUCATION, BIHAR Semester IV Diploma in Civil, Civil (Rural), Computer Science & Engg., Electrical, Electronics, Electronics & Communication Engg., Mechanical Engg. and Mechanical (Aumobile) Engg. Exam. 2014 (Even) Practical

More information

CENTRE FOR DISTANCE EDUCATION ACHARYA NAGARJUNA UNIVERSITY:: NAGARJUNA NAGAR (A.P)

CENTRE FOR DISTANCE EDUCATION ACHARYA NAGARJUNA UNIVERSITY:: NAGARJUNA NAGAR (A.P) B.Tech., (Civil / Mechanical / EEE / EC / Computer Science) Examinations, MAY-2013. FIRST YEAR 20-05-13 22-05-13 24-05-13 26-05-13 28-05-13 30-05-13 01-06-13 12-06-13 TIME: 2.00 PM to 5.00 PM Subject Max.

More information

UNIVERSITY OF PUNE. Examination Circular No. 04 of Examinations, May,, INSTRUCTIONS FOR CANDIDATES

UNIVERSITY OF PUNE. Examination Circular No. 04 of Examinations, May,, INSTRUCTIONS FOR CANDIDATES UNIVERSITY OF PUNE 04/ F - 2014 S.E. ( All Branches ) May, 2014 Examination Circular No. 04 of 2014 Programme of S. E. [ All Branches 2008 AND ] ( Semester I & II ) Examinations, May,, 2014. INSTRUCTIONS

More information

VISVEWARAIAH TECHNOLOGICAL UNIVERSITY, BELGAUM SCHEME OF SYLLABUS

VISVEWARAIAH TECHNOLOGICAL UNIVERSITY, BELGAUM SCHEME OF SYLLABUS SCHEME OF SYLLABUS - 2010 III SEMESTER B.TECH. (TEXTILE TECHNOLOGY)/ B.TECH. (SILK TECHNOLOGY) Theory Duration 1. 10TX31 Textile Polymer Science 2. 10TX32 Textile Fibres 3. 10TX33 Yarn Manufacture-1 4.

More information

MECHANICAL ENGINEERING AND DESIGN 2017/18 SEMESTER 1 MODULES

MECHANICAL ENGINEERING AND DESIGN 2017/18 SEMESTER 1 MODULES Visual Communications ENG_4_542 Tuesday and Wednesday 2pm 4pm (Tues), 9.30am 11.30am (Weds) Students attend both sessions. The module aims a) to develop the capacities of observation and visualisation,

More information

Class: 2 nd Semester (New Scheme)

Class: 2 nd Semester (New Scheme) Class: 2 nd Semester (New Scheme) 12/06/2019 14/06/2019 18/06/2019 21/06/2019 25/06/2019 28/06/2019 Civil/PHE Civil Electrical Mechanical Automobile Wood Tech Textile Tech Leather Tech Physics- Chemistry-

More information

KURUKSHETRA UNIVERSITY KURUKSHETRA

KURUKSHETRA UNIVERSITY KURUKSHETRA UNIVERSITY Date-Sheet for the B. Tech. Engineering (II SEMESTER) Examination commencing w.e.f. 18.6.2012 (THEORY EXAMINATION) Time of Examination: 2.30 P.M. onwards (EVENING SESSION) Date and Day Ref.

More information