GUJARAT TECHNOLOGICAL UNIVERSITY
|
|
- Denis Long
- 5 years ago
- Views:
Transcription
1 Subject Code Subject Name Date Time Branch 01: Aeronautical Engineering Aerodynamics-II :30 To 05: Fundamentals of Jet Propulsion :30 To 05: Vibration and Noise Control :30 To 05: Computational Fluid Dynamics -II :30 To 05: Basic Control Theory :30 To 05: Avionics :30 To 05:00 Branch 02: Automobile Engineering Automobile Component Design :30 To 05: Automobile Heat Transfer :30 To 05: Transport Management and Laws :30 To 05: Automobile Chassis and Body Engineering :30 To 05: Vehicle Maintenance and Garage Practice :30 To 05: Quality Management :30 To 05:00 Branch 03: Bio-Medical Engineering Diagnostic Instrumentation :30 To 05: Analytical & Optical Instrumentation :30 To 05: Therapeutic Instrumentation :30 To 05: Bio-Medical Signal Processing :30 To 05: Bio-Medical Control Theory :30 To 05:00 Branch 04: Bio-Technology Advanced Molecular Biology-II :30 To 05: Fundamentals of Industrial Biotechnology :30 To 05: Environmental Biotechnology :30 To 05: Principles of Process Engineering-III :30 To 05: Instrumentation and Process Control :30 To 05: Bioethics, Patents and IPR :30 To 05:00
2 Branch 05 :Chemical Engineering Mass Transfer Operation II :30 To 05: Chemical Process Industries-II :30 To 05: Process Equipment Design-I :30 To 05: Computer Aided Process Synthesis :30 To 05: Pollution Control & Safety Management :30 To 05:00 Branch 06: Civil Engineering Advanced Construction Technology :30 To 05: Applied Fluid Mechanics :30 To 05: Railway, Bridge & Tunnel Engineering :30 To 05: Earthquake Engineering :30 To 05: Water & Waste Water Engineering :30 To 05: Geotechnical Engineering - II :30 To 05:00 Branch 07: Computer Engineering Software Engineering :30 To 05: Information Security :30 To 05: Computer Graphics :30 To 05: Web Application Development :30 To 05: Theory Of Computation :30 To 05: System Programming :30 To 05:00 Branch 08 : Electrical & Electronics Engineering Integrated Circuits & Application :30 To 05: Electronic Communication :30 To 05: Switch Gear & Protection :30 To 05: Advanced Microprocessors :30 To 05: Electrical Machine Design :30 To 05:00 Branch 09: Electrical Engineering Electrical Machine - III :30 To 05: Power Electronics - II :30 To 05: Microcontroller :30 To 05: Electrical & Electronic Measurement :30 To 05: High Voltage Engineering :30 To 05: Theory of Electromagnetics :30 To 05:00
3 Branch 10 : Electronics Engineering Audio - Video Systems :30 To 05: Antenna & Wave Propogation :30 To 05: VLSI Technology and Design :30 To 05:00 Branch 11 : Electronics & Communication Engineering Audio - Video Systems :30 To 05: Antenna & Wave Propogation :30 To 05: VLSI Technology and Design :30 To 05:00 Branch 12 : Electronics & Telecommunication Engineering Audio - Video Systems :30 To 05: Antenna & Wave Propogation :30 To 05: VLSI Technology and Design :30 To 05:00 Branch 13 : Environment Engineering Municipal Engineering :30 To 05: Fundamentals of Air Pollution :30 To 05: Estimation, Specification & Project Management :30 To 05: Occupational Health & Safety :30 To 05: Biological Process for Wastewater Treatment :30 To 05:00 Branch 14 : Food Processing & Technology Food Process Equipment Design :30 To 05: Food Rheology & Sensory Evaluation :30 To 05: Food Engineering Operations - II :30 To 05: Milk & Milk Products Technology :30 To 05: Food Drying & Dehydration :30 To 05:00
4 Branch 15 :Industrial Engineering Materials Management :30 To 05: Product Development & Value Engineering :30 To 05: Finance Management & Cost Control :30 To 05: Metal Cutting & Advanced manufacturing processes :30 To 05: Maintenance & Safety Engg :30 To 05:00 Branch 16 : Information Technology Software Engineering :30 To 05: Information Security :30 To 05: Computer Graphics :30 To 05: Modelling, Simulation and Operations Research :30 To 05: Web Technology and Programming :30 To 05:00 Branch 17 : Instrumentation & Control Engineering Instrumentation System :30 To 05: Process Control :30 To 05: Control System Components :30 To 05: Instrumentation Measurement - II :30 To 05: Analog and Digital Communication :30 To 05:00 Branch 19: Mechanical Engineering Dynamics of Machinery :30 To 05: Internal Combustion Engines :30 To 05: Computer Aided Design :30 To 05: Control Engineering :30 To 05: Industrial Eng ineering :30 To 05: Alternate Energy Sources :30 To 05: Heat and Mass Transfer :30 To 05:00 Branch 20 : Mechatronics Engineering Design of Mechanisms - I :30 To 05: Micro Processors & Micro Controllers :30 To 05: Control of Electric Drives :30 To 05: Electromechanical Measurements & Instruments :30 To 05: Hydraulic and Pneumatic Systems :30 To 05:00
5 Branch 21: Metallurgy Engineering Physical Metallurgy - I :30 To 05: Steel Making :30 To 05: Powder Metallurgy :30 To 05: Electrometallurgy & Corrosion :30 To 05: Advanced Materials and Applications :30 To 05:00 Branch 22 : Mining Engineering Economic Geology I :30 To 05: Underground Metal Mining :30 To 05: Sub-Surface Environment :30 To 05: Mine Surface Environment :30 To 05: Mine Hazards :30 To 05: Computer Application in Mining :30 To 05:00 Branch 23: Plastic Technology Plastic Extrusion Technologies :30 To 05: Plastic Structure, Property & Relationship :30 To 05: Plastic Process Instrumentation and Process Control :30 To 05: Additives & Compounding :30 To 05: Reaction Engineering & Rheology :30 To 05:00 Branch 24: Power Electronics Industrial Instrumentation :30 To 05: Microcontrollers for Power Electronics :30 To 05: Switch Gear & Fault Analysis :30 To 05: Power Processing Circuits - I :30 To 05: Industrial Drives & Control - I :30 To 05:00 Branch 25 :Production Engineering Statistical Methods and Quality Control :30 To 05: Welding Technology :30 To 05: Computer Aided Design :30 To 05: Allied Manufacturing Processes :30 To 05: Metal Forming Processes :30 To 05: Estimating, Costing & Engineering Economics :30 To 05:00
6 Branch 26 :Rubber Technology Rubber Compound & Product Testing :30 To 05: Synthetic Rubbers :30 To 05: Rubber Equipment Design - I :30 To 05: Thermoplastics Elastomers & Polymer Blends :30 To 05: Characterisation of Rubber :30 To 05:00 Branch 28 : Textile Processing Technology of Dyeing - II :30 To 05: Analytical Textile Chemistry - II :30 To 05: Chemistry and Applications of Textile Auxiliaries :30 To 05: Technology of Finishing - I :30 To 05: Technology of Printing - I :30 To 05:00 Branch 29: Textile Technology Statistical Quality Control & Textile Costing :30 To 05: Advance Fabric Structure & CAD :30 To 05: Physical Testing :30 To 05: Energy Conservation & Pollution Control In Textile Industry :30 To 05: Technical Textiles -I :30 To 05:00 Branch 31 : Computer Science & Engineering Software Engineering :30 To 05: Information Security :30 To 05: Computer Graphics :30 To 05: Web Application Development :30 To 05: Theory Of Computation :30 To 05: Operating System Design :30 To 05:00 Branch 32: Information & Communication Technology Antenna and Wave Propagation :30 To 05: Modelling Simulation and Operation Research :30 To 05: Web Technology & Programming :30 To 05:00
7 Branch 34: Manufacturing Engineering Finite Element Analysis in Manufacturing Engineering :30 To 05: Metal Forming Processes :30 To 05: Advance Manufacturing Processes :30 To 05: Mechatronics :30 To 05: Tool Design :30 To 05: Composite Technology (Institute Elective-III) :30 To 05:00 IMPORTANT INSTRUCTION FOR STUDENTS APPEARING IN ABOVE MENTION EXAMINATIONS: 1. All the students required to carry hall ticket with them issued by the university during exam time. 2. They must be in their respective examination hall 30 minutes before exam time failing which entry will not be permitted. 3. Any type of printed/handwritten/typed material, Mobile phone, Pager, or programmable calculator, PDA or any other objectionable material which breaches the code of conduct of university and falls under unfair means as per GTU circular dated 3 rd November, 2010 is not allowed to carry in examination hall 4. They must bring their own instruments such as scientific calculator etc. to be used in examination as its exchanges will not be permitted under any circumstances during exam time. I/C Controller of Examination Gujarat Technological University Copy to: 1. All principals of B.E. Colleges affiliated to GTU for display on notice board and departments of the colleges 2. All section of Gujarat Technological University 3. Commissionerate of Technical Education, Gujarat State for information
GUJARAT TECHNOLOGICAL UNIVERSITY
01 AERONAUTICAL 160101 AERODYNAMICS-II 160102 FUNDAMANTALS OF JET PROPULSION 160103 VIBRATION AND NOISE CONTROL 160104 BASIC CONTROL THEORY 160105 COMPUTATIONAL FLUID DYANAMICS -II 160106 AVIONICS 02 AUTOMOBILE
More informationGUJARAT TECHNOLOGICAL UNIVERSITY
01 Aeronautical 160101 Aerodynamics-II 16/05/2011 160102 Fundamantals of Jet Propulsion 17/05/2011 160103 Vibration and Noise Control 19/05/2011 160104 Basic Control Theory 21/05/2011 160105 Computational
More informationT.E. (CGPA) (All Branches) Sem-V & VI (New/Old) Examinations May, 2018
T.E. (CGPA) (All Branches) & VI (New/Old) NORTH MAHARASHTRA UNIVERSITY, JALGAON Circular No.155 of 2018 Programme of T. E. CGPA [ All Branches (Sem. V & VI ) Course : Course : July, 2014 (New) And Course
More informationSAVITRIBAI PHULE PUNE UNIVERSITY
S- 165/2014 SAVITRIBAI PHULE PUNE UNIVERSITY EXAMINATION CIRCULAR No. 165 of 2014 Programme of the M.E. 2013 Credit Pattern (Sem. I & II ) (All Branches) Examination, Nov. - 2014. Instructions to the Candidates:
More informationJAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
30-11-2018 03-12-2018 05-12-2018 08-12-2018 13-12-2018 FRIDAY SATURDAY GROUND WATER DEVELOPMENT AND DISASTER AND MITIGATION ADVANCED STRUCTURAL ESTIMATING AND FINITE ELEMENT CIVIL DESIGN GIS AND REMOTE
More informationDATE & DAY MONDAY
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD KUKATPALLY - HYDERABAD 500 085 E X A M I N A T I O N B R A N C H III YEAR B.TECH-I SEMESTER -R15 REGULATION- SUPPLEMENTARY EXAMINATIONS APRIL/MAY-2018
More informationStructural Analysis Control System Engineering Cim Elective I Computer Graphics for Cad/Cam. Advanced in Operating System Design
Sr No Name of Branch RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY **** MTECH,ME,MDES, MARCH FIRST SEMESTER EXAMINATION OF summer 2015 # PROGRAMME( WRITTEN ) # MTech,ME,MDes,MArch FIREST SEMESTERsummer
More information2. The re-examination application link on the portal will be active during the below mentioned period:
IMPORTANT INSTRUCTIONS TO CANDIDATES 1. All the eligible students who have enrolled in the Academic Year 2014-2015 onwards in the first year of the program are hereby informed to apply for the respective
More informationEND SEMESTER EXAMINATIONS MAY / JUNE 2015 TIME TABLE UG Semester VIII Session : A.N Time: Friday
UG Semester VIII Session : A.N Time: 02.00 05.00 CIVIL MECH POLY EEE 04.05.15 CE 411 Bridge ME 408 Operations Research and Systems Analysis PT 406 Polymer Recycling and Waste Management EE 407 Solid State
More informationInternational students from non-english speaking backgrounds will be required to take an English language communications course.
Master of Engineering (ME) 2015 These Program Rules should be read in conjunction with the University's policies (http://www.adelaide.edu.au/policies). Overview The Master of Engineering is comprised of
More informationB.E. (CGPA) (All Branches) Sem-VII & VIII) Examinations Nov/Dec, 2018
(CGPA) (All Branches) Sem-VII & VIII) Circular No. 283 of 2018 Programme of [ All Branches] ( Sem-VII & VIII) 1) Candidates are required to be present at their respective places of the Examinations fifteen
More informationHydro Mechanics & Water Resources Engineering. Water. Management PTPG IV - Semester. PTPG IV - Semester Pre stressed Concrete
Date and Day Pre stressed UNIVERSITY COLLEGE OF ENGINEERING (Autonomous) OSMANIA UNIVERSITY M. E. (Civil) ( & ) and IV-Semester () Main Examination September 2012 EXAMINATION TIME TABLE Structural Prestressed
More informationSEMESTER: I BATCH: Branch: CSE
SCHOOL OF COMPUTING SATHYABAMA UNIVERSITY SEMESTER: I BATCH: 2017-2021 Branch: CSE 15.09.2017 SCS1102 Fundamentals of Programming 18.09.2017 SMT1101 Engineering Mathematics I 21.09.2017 SCS1101 Problem
More informationMONDAY. Water Resources Engineering-II. Estimating & Costing CE,CEE. Power System Operation and Control. Digital Signal Processing
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD Elective-II Finite Element Methods Elective-III Advanced Structural CIVIL (01-C E) ELECTRICAL AND ELECTRONICS (02-E E E) MECHANICAL (03-M E) Remote Sensing
More informationUNIVERSITY OF PUNE. Examination Circular No. 04 of Examinations, May,, INSTRUCTIONS FOR CANDIDATES
UNIVERSITY OF PUNE 04/ F - 2014 S.E. ( All Branches ) May, 2014 Examination Circular No. 04 of 2014 Programme of S. E. [ All Branches 2008 AND ] ( Semester I & II ) Examinations, May,, 2014. INSTRUCTIONS
More informationSAVITRIBAI PHULE PUNE UNIVERSITY
147/ S - 2014 SAVITRIBAI PHULE PUNE UNIVERSITY Examination Circular No. 147 of 2014 Programme of S. E. [ All Branches 2008 AND ] ( Semester I & II ) Examinations, October,, 2014. INSTRUCTIONS FOR CANDIDATES
More informationEND EXAMINATION TIME TABLE OF II-B.TECH-I-SEM-R07-SUPPLE-NOV-DEC 2016 Examination Timings: A.M. To P.M.
JYOTHISHMATHI INSTITUTE OF TECHNOLOGY & SCIENCE KARIMNAGAR 505 481. DATE & DAY 21-11-2016 23-11-2016 25-11-2016 29-11-2016 01-12-2016 03-12-2016 (Saturday) END EXAMINATION TIME TABLE OF II-B.TECH-I-SEM-R07-SUPPLE-NOV-DEC
More informationCENTRE FOR DISTANCE EDUCATION ACHARYA NAGARJUNA UNIVERSITY:: NAGARJUNA NAGAR (A.P)
B.Tech., (Civil / Mechanical / EEE / EC / Computer Science) Examinations, MAY-2013. FIRST YEAR 20-05-13 22-05-13 24-05-13 26-05-13 28-05-13 30-05-13 01-06-13 12-06-13 TIME: 2.00 PM to 5.00 PM Subject Max.
More informationList of Electives. M.TECH.& M.E.II Sem.
List of Electives. M.TECH.& M.E.II Sem. Sr. No. 1. Name of Branch Structure 1.Advanced Steen Design 2.Design of Earthquake Resistant Structures 3.Design Environmental Structures I V 2. Computer Aided Design
More information06 March Day Date All Streams. Thursday 03 May 2018 Engineering Mathematics II. Saturday 05 May 2018 Engineering Physics
/ SCHOOL OF TECHNOLOGY MANAGEMENT &ENGINEERING FINAL EXAMINATION TIME TABLE (ACADEMIC YEAR: 2017 18) MASTER OF BUSINESS ADMINISTRATION IN TECHNOLOGY MANAGEMENT (2017-22) YEAR: I, SEMESTER: II CAMPUS: MUMBAI,
More informationCOMPUTER SCIENCE AND ENGINEERING
COMPUTER SCIENCE AND ENGINEERING Internet of Thing Cloud Computing Big Data Analytics Network Security Distributed System Image Processing Data Science Business Intelligence Wireless Sensor Network Artificial
More informationGOVERNMENT OF KERALA ABSTRACT
GOVERNMENT OF KERALA ABSTRACT Higher Education Technical Equivalent / alternate subjects in Revision 2003 scheme to revised scheme and Revision 97 scheme Approved Orders issued HIGHER EDUCATION (L) DEPARTMENT
More informationOSMANIA UNIVERSITY No.15 /BE/Exams/TT TIME-TABLE
No.15 /BE/Exams/TT2012 05-04-2013 TIME-TABLE B.E. I/IV (REGULAR) (Main) EXAMINATIONS: MAY/JUNE, 2013 Time: 10.00 a.m. to 1.00 p.m. Subject 04-06-2013 11-0-2013 15-06-2013 20-06-2013 24-06-2013 26-06-2013
More informationSATHYABAMA INSTITUTE OF SCIENCE AND TECHNOLOGY (DEEMED TO BE UNIVERSITY)
SEMESTER: I BATCH: JUN 2018 Branch: ECE 21.07.2018 SEE1202 Electromagnetic Theory 22.07.2018 SEC1207 Digital Logic Circuits 28.07.2018 SEC1205 Electronic Circuits - I 29.07.2018 SEC1209 Analog Communication
More informationMonday Center for the Examination will be as under
NORTH MAHARASHTRA UNIVERSITY, JALGAON Circular No.157 of 2018 Programme of the M. E. (All Branches) Examinations May, 2018 1. Candidates are required to be present at their respective places of the Examinations
More informationCONTROLLER OF EXAMINATIONS
UG Semester VII Session : F.N Time: 09.30 12.30 CIVIL MECH POLY EEE ECE 31.12.15 CE 401 Earthquake ME 401 Automobile PT 401 Mould and Die Design EE 401 Power System Control EC 401 Electronic System Design
More informationTheory Examination Date Sheet for Diploma Courses Session Nov-Dec, Time: 11:00AM (Friday Timing: 10:00AM)
Class: 1 st Semester 15/12/2018 20/12/2018 26/12/2018 31/12/2018 04/01/2019 09/01/2019 ALL BRANCHS ECEPT MLT, OMCA, TT, TD, ARCH App. Physics-I Theory Examination Sheet for Diploma Courses Session Nov-Dec,
More informationClass: 2 nd Semester (New Scheme)
Class: 2 nd Semester (New Scheme) 12/06/2019 14/06/2019 18/06/2019 21/06/2019 25/06/2019 28/06/2019 Civil/PHE Civil Electrical Mechanical Automobile Wood Tech Textile Tech Leather Tech Physics- Chemistry-
More informationर ष ट र य प र द य ग क स स थ न प द च च र
FIRST SEMESTER - (2014 Regulation) HM101 MA101 PH101 CH101 CE101 CS101 CC101 ME101 COMMUNICATION IN ENGLISH I MATHEMATICS I PHYSICS I CHEMISTRY I ENGINEERING MECHANICS BASICS OF PROGRAMMING ENERGY & ENVIRONMENTAL
More informationWEDNESDAY. Advanced Foundation Engineering. Water Resources. Finite Element Methods (Comm. To CE, CEE) (Comm. To CE, CEE) Engineering- II
IV YEAR B.TECH - I SEMESTER R13 REGULATION- SUPPLEMENTARY EXAMINATIONS NOVEMBER/DECEMBER-2018 CIVIL (01-C E) ELECTRICAL AND ELECTRONICS (02-E E E) Remote Sensing & GIS (Comm. To CE, VLSI (Comm to EEE,
More informationNandha Engineering College (Autonomous) Erode Examination -Sep 2018 Department Wise Time Table
B.E - Computer Science and Engineering F.N: 09.30 AM to 12.30 PM A.N: 01.30 AM to 04.30 PM Date Session Code Subject 14-11-2018 FN 13CSX08 Network Analysis and Management AN 13CSX15 Software Testing Methodologies
More informationBIOMEDICAL ELECTRONICS. Date & Day II - SEMESTER ADVANCED MEDICAL IMAGING DIAGNOSTIC AND THERAPEUTIC EQUIPMENT MEDICAL PRODUCT DESIGN
OSMANIA UNIVERSITY, HYDERABAD - 7 M. E. (BME) (Main) Examination, September 2013 EXAMINATION TIME TABLE Time : 2.00 PM to 5.00 PM Department of BME Date & Day BIOMEDICAL ELECTRONICS II - SEMESTER ADVANCED
More informationB.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session
NA UNIVERSITY, CHENNAI - 600 5 APRIL/MAY- 28 For candidates admitted in Anna University,Chennai during Academic Years 21,22 & 23 PTCE22 PTGE2111 PTCE2254 PTCE22 PTCE2252 PTCE23 PTCE2255 PTGE21 PTCE2251
More informationSEMESTER END EXAMINATIONS MAY 2016 TIME TABLE UG Semester VIII Session : A.N Time: Tuesday
UG Semester VIII Session : A.N Time: 02.00 05.00 26.05.16 28.05.16 31.05.16 02.06.16 04.06.16 07.06.16 CIVIL MECH CE 411 Bridge ME 408 Operations Research and System Analysis CEX 004 Repair and Rehabilitation
More informationB.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session
NA UNIVERSITY, CHENNAI - 600 5 NOVEMBER/DECEMBER- 27 For candidates admitted in Anna University,Chennai during Academic Years 21,22 & 23 PTCE22 PTGE2111 PTCE2254 PTCE22 PTCE2252 PTCE23 PTCE2255 PTGE21
More informationOSMANIA UNIVERSITY No. 33/BE/Exams/TT/ REVISED TIME-TABLE
OSMANIA UNIVERSITY Page No: 6/11 B.E. I/IV (Main&Backlog) EXAMINATIONS: APR/MAY, 2014 Time: 10.00 a.m. to 1.00 p.m. Date Subject 09-06-2014 English 11-06-2014 Mathematics I 13-06-2014 Mathematics II 18-06-2014
More informationIDEAL EDUCATION MANAGEMENT &TECHNOLOGY
Diploma in Electrical Engineering (DEE) Subjects Covered Electrical Engg. Electric Circuit Power Generation Basic Electronics Solid State Devices & Circuits Switching Theory & Logic Design Electro Magnetic
More informationCONTROLLER OF EXAMINATIONS. B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session
NA UNIVERSITY, CHENNAI - 600 5 NOVEMBER/DECEMBER- 28 For candidates admitted in Anna University,Chennai during Academic Years 22 & 23 PTCE22 PTGE2111 PTCE22 PTCE2252 PTCE2254 PTCE23 PTCE2255 PTGE21 PTCE2251
More informationIndian Institution of Engineers
Indian Institution of Engineers Date Sheet for JUNE - 2017 Examination Technician Membership Examination - Part 1 & Part 2 Architecture(AR)/Civil(CL)/Mechanical(ML)/Electrical(EL)/Automobile(AM)/Chemical(CH)/
More informationDay & Date Course No. Branch. EN Engineering Physics
1 MAHATMA GANDHI UNIVERSITY TIMETABLE FOR B.TECH DEGREE EXAMINATIONS, MAY/JUNE2018 Ref: Notification No. EA I/1/352/2018 dated 23.03.2018 Semester I & II (New Scheme) (2010 -Admission onwards - Supplementary)
More informationM. Phil. / Pre. Ph. D. New Syllabus Paper Faculty of Science
THE FINAL PROGRAMME SHIVAJI UNIVRSITY, KOLHAPUR Circular No. 401 Exam Final Programme of the M.Phil. / Pre.Ph.D. Examination to held in April/May 014. 1. Students should see their Seat No. and Name in
More informationAvinashilingam Institute for Home Science and Higher Education for Women Coimbatore
Avinashilingam Institute for Home Science and Higher Education for Women Coimbare 641 043 Time table for Bachelor of I Semester Examination November 2011 (2011 Batch) Date and Day 9.11.2011 11.11.2011
More informationOSMANIA UNIVERSITY No.14 /BE/Exams/TT TIME-TABLE
B.E. I/IV (Reg.) & (Suppl.) EXAMINATIONS: Nov./Dec., 2013 Time: 02.00 p.m. to 5.00 p.m. Subject 05-12-2013 English 09-12-2013 Mathematics I 12-12-2013 Mathematics II 17-12-2013 Physics 20-12-2013 Chemistry
More informationDepartment of Biotechnology Engineering. Department of Electrical and Computer Engineering. Department of Manufacturing and Materials Engineering
KULLIYYAH OF ENGINEERING CONTACT DETAILS Deputy Dean (Postgraduate & Research) Kulliyyah of Engineering, IIUM P.O. Box: 10, 50728 Kuala Lumpur, MALAYSIA T : +60-6196 4494/4511/ 4595 F : +60 6196 4568 W:
More informationENGR 10 John Athanasiou Spring
ENGR 10 John Athanasiou Spring 2010 http://www.bls.gov/oco/ocos027.htm 1. What is an engineering discipline? 2. Why is it created? The need to create a product /service Engineering Disciplines 1. Aerospace
More informationDepartment of Mechanical Engineering
UNDERGRADUATE COURSES Curriculum for the Degree of Bachelor of Science in Mechanical Engineering: General s 6-0-05 6-0-0 6-0-04 6-0-05 6-0-0 6-0-0 5-0-7 5-0-0 5-0-0 5-0-0 5-0-04 6-0-4 6-0-0 6-0-0 6-0-0
More informationSAVITRIBAI PHULE PUNE UNIVERSITY
SAVITRIBAI PHULE PUNE UNIVERSITY (Formerly University of Pune) EXAMINATION CIRCULAR NO.29 OF.2018 SECOND YEAR(2008,2012/2014 & 2015 COURSE)ENGINEERING Examination of APR/MAY-2018 (Under Faculty of SCIENCE
More informationKURUKSHETRA UNIVERSI TY KURUKSHETRA. REVISED Date-Sheet for B.Tech. Engineering Ist Semester Examination commencing w.e.f
UNIVERSI TY REVISED Date-Sheet for B.Tech. Ist Semester Examination commencing w.e.f. 7.1.2012. Time of Examination: 2.00 P.M. onwards (Evening Session) DATE AND DAY REFERENCE NO./SUBJECT AND PAPER JANUARY,
More informationCourses of 6 th semester Session May-June, 2017(All Polytechnics of J&K, State)
Class: 6 th Semester(OLD SCHEME) Date Civil /Civil(PHE) Automobile Wood Tech IT Arch. Asstt. Inst. And Control Steel and Timber Structures and Drawing Motor Vehicle Act and Transport E-Commerce Quantity
More informationTheory Examination Date Sheet for Diploma Courses Session Nov-Dec,
2 Class: 6 th Semester(OLD SCHEME) Date Civil /Civil(PHE) Electrical Mechanical Automobile Wood Tech E&C 12/12/2 14/12/2 16/12/2 18/12/2 Steel and Timber Structures and Drawing Repair & Buildings Control
More informationKURUKSHETRA UNIVERSITY KURUKSHETRA
UNIVERSITY Date-Sheet for the B. Tech. Engineering (II SEMESTER) Examination commencing w.e.f. 18.6.2012 (THEORY EXAMINATION) Time of Examination: 2.30 P.M. onwards (EVENING SESSION) Date and Day Ref.
More informationBusiness Economics & Accountancy [201-S] Principles of Management-II [211-S] Business Statistics-I [212-S] Conversational English-I [213-S]
Programme for the Diploma in /Technology (Fulltime Course) Part-I 2nd Semester Examination - June 2014 (For REGULAR students) Date Time All Branches except ARCH, MOPM, MT, PHO, DP ARCH MOPM MT PHO DP 04.06.2014
More informationTHE NATIONAL INSTITUTE OF ENGINEERING, Mysore UG - Semester End Examination Schedule - December 2014
5/12/2014 1 1 1 CV0413 Quantity Surveying & Estimation Computer Concept & C Programming CV0418/CV0501 Mechanics of Deformable Bodies CV0419/CV0201 Building Materials & Construction CV0420/CV0402 Mechanics
More informationMAHARSHI DAYANAND UNIVERSITY, ROHTAK
Date & Day Syll. Code Subject (Full Nomenclature) ID NO. Branches 10.12.2018 ESC-ME-102-G Workshop Technology 3013 Common for All Branches 12.12.2018 BSC-CH-101-G Chemistry-I 3006 Common for All Branches
More informationENGINEERING What can I do with this degree?
ENGINEERING What can I do with this degree? ANY DISCIPLINE Production Sales and Marketing Management Consulting Research and Development Teaching Law AEROSPACE Propulsion Fluid Mechanics Thermodynamics
More informationStudying at preparing courses Studying at PC (Russian language 10 months) Study at PC (Russian language, entrance after 1-st of
Cost for foreign students at the Faculty of International Education NTU "KhPI" in 2016/2017 academic year to students enrolled on an individual contract Type of study Cost per 1 year, in $ Studying at
More informationJAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY KAKINADA U N I V E R S I T Y E X A M I N A T I O N C E N T E R, K A K I N A D A
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY KAKINADA U N I V E R S I T Y E X A M I N A T I O N C E N T E R, K A K I N A D A III B TECH - II SEMESTER (R13 REGULATION) SUPPLEMENTARY EXAMINATIONS NOVEMBER,
More informationBOARD OF TECHNICAL EDUCATION, UTTAR PRADESH Question Paper Account for Special Back Paper Examination (December Exam)
Page 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 0001 DESIGN OF STEEL & MASONARY STRUCTURES 0002 TRANSPORTATION ENGINEERING 0003 DESIGN OF
More informationOFFICE OF THE CONTROLLER OF TECHNICAL EXAMINATIONS TIME TABLE NOTIFICATION Date: REVISION 2010
No. TX17/40/17 OFFICE OF THE CONTROLLER OF TECHNICAL EXAMINATIONS TIME TABLE NOTIFICATION Date: 10-10-2017 DIPLOMA EXAMINATION IN ENGINEERING / TECHNOLOGY / MANAGEMENT / COMMERCIAL PRACTICE OCTOBER/NOVEMBER
More informationU N I V E R S I T Y O F C A L I C U T Pareeksha Bhavan
U N I V E R S I T Y O F C A L I C U T Pareeksha Bhavan REVISED TIME TABLE FOR THE SEVENTH SEMESTER B.Tech/ P T B.Tech (2009 SCHEME) REGULAR / SUPPLEMENTARY / EXAMINATIONS NOVEMBER 2016 Time of Examination:
More informationCollege of Engineering Pune
College of Pune Semester- I End Semester Examination 2018-19 F. Y. B. Tech Date 26th Nov 2018 28th Nov 2018 30th Nov 2018 2nd Dec 2018 4th Dec 2018 6th Dec 2018 Day Monday Wednesday Friday Sunday Tuesday
More informationComputer Sciences & Engineering Titles
Bapatla Engineering College :: Library Science Direct e-journals 2016 subscribed by the College Library. Computer Sciences & Engineering - 275 Titles S No ISSN Journal Title Imprint Specialization Subject
More informationDate Sheet Code: 1718EVEMST Sl No. Date / Day Time Course No Course Name
1 2 3 4 UCS304 UPH001 UPH004 PCA410 PMC402 PMP401 PMP403 UCE804 UCH407 UCS801 UEC301 UES012 UME804 UPE602 DPM003 DSS005 PBT302 PBY209 PCD312 PCE204 PCY216 PEC339 PEE212 PEI312 PIS205 PMC211 PME206 PMP205
More informationRajasthan Technical University, Kota jktlfkku rduhdh fo'ofo ky;]dksvk
Rajasthan Technical University, Kota jktlfkku rduhdh fo'ofo ky;]dksvk ATTENTION III SEM BACK STUENTS For all batches of III Semester of B.Tech./B.Arch. including Main, Back and old Back, there shall be
More information28/05/2016 Saturday MH7103: Traditional and Contemporary Landscapes
Page 1 of 28 M.Arch. MH7101: Contemporary Processes in Architectural Design I MH7102: Urban Conservation and Practice MH7103: Traditional and Contemporary Landscapes MH7112: Urban Design Studio MH7111:
More informationMAHARSHI DAYANAND UNIVERSITY, ROHTAK
Date & Day Syll. Code Subject (Full Nomenclature) P. Code Branches MATH-101-F Mathematics - I (1002) 24002 F Sceheme 10.12.2018 12.12.2018 CH-101 F Engineering Chemistry (1005) 24005 F Sceheme 14.12.2018
More informationInvitation for SMEs from associate partner institutions preparing a course under NPTEL
Invitation for SMEs from associate partner institutions preparing a course under NPTEL Criteria for faculty interested in preparing courses under NPTEL: PhD from a recognized university with experience
More informationContinued to page No. 13. Gazette of India No. 651, dated July, 24, 2017
Annexure - 1 Continued to page No. 13 Gazette of India No. 651, dated July, 24, 2017 of Annexure 2 Details of desired Specializations required in various departments S.No. Name of the Department Desired
More informationGUJARAT TECHNOLOGICAL UNIVERSITY. SEMESTER - II TEACHING SCHEME(IN Total EXAMINATION SCHEME COURSE COURSE TITLE CODE L T P
GUJARAT TECHNOLOGICAL UNIVERSITY BRANCH :02 BRIDGE FOR DIPLOMA PROGRAMME IN AUTOMOBILE ENGINEERING C320201 THERMODYNAMICS & HYDRAULICS 21 10 0 31 70 30 0 0 100 TOTAL 49 10 0 59 140 60 0 0 200 BRANCH :03
More information(Wednesday) Construction Technology and Management (RT41013) Digital Image Processing (RT41043) (Common to ECE/EIE/ECC)
Branch JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY KAKINADA EXAMINATION CENTER, KAKINADA - 533003 IV B.TECH - I SEMESTER (R13) ADVANCED SUPPLEMENTARY EXAMINATIONS, FEB/MARCH - 2018 T I M E T A B L E T I
More informationOFFICE OF THE CONTROLLER OF TECHNICAL EXAMINATIONS TIME TABLE NOTIFICATION REVISION 2010 SEMESTER I
OFFICE OF THE CONTROLLER OF TECHNICAL EXAMINATIONS TIME TABLE NOTIFICATION No. D1/976/2019/CTE Dated : 07/03/2019 DIPLOMA EXAMINATION IN ENGINEERING / TECHNOLOGY / MANAGEMENT / COMMERCIAL PRACTICE APRIL
More informationField of Research Classification (Classification of ARRS)
Field of Research Classification (Classification of ARRS) 1 Natural sciences and mathematics 1.01 Mathematics 1.01.01 Analysis 1.01.02 Topology 1.01.03 Numerical and computer mathematics 1.01.04 Algebra
More informationHUM-102-E COMM. SKILLS IN ENGLISH (A36) 1989 (E Scheme) HUM-102-F COMM. SKILLS IN ENGLISH (1017) New Scheme
MAHARSHI DAYANAND UNIVERSITY, ROHTAK Theory Date-Sheet for B.E / B.Tech. 2nd Sem. Examinations May / June - 2012 Time of Exam. 9.30 A.M. to 12.30 P.M. / Center of Exam : As per Roll List Date Paper Code
More information(New and Old Syllabus)
First Semester B.E. Compartmental Examinations, August-September 2018 (New and Old Syllabus) PROGRAM (Written) 04.09.18 Tuesday All Eng Communication and Tech report Writing(O)/ Technical Report Writing
More informationMAHARSHI DAYANAND UNIVERSITY, ROHTAK
BE. / B.Tech 2nd Sem - Page-1 MAHARSHI DAYANAND UNIVERSITY, ROHTAK Theory Date-Sheet for B.E / B.Tech. 2nd Sem. Examinations May / June - 2011 Time of Exam. 2.30 A.M. to 5.30 P.M. / Center of Exam : As
More informationOdd Semester Examination
Time Table Date: 12.12.2016 Time: 10.00am-01.00 pm Course Branch Sem. Paper B. Tech EC I Electrical Engg. EI I EE I CSE I Computer Concepts & Programming In C IT I ME I B. Pharm I Anatomy Physiology &
More informationGujarat Technological University. BE Sem -7 Practical Exam Time Table Summer Exam 2014 (For All Zone Students)
NO:GTU/BE7/Prac/Summer4 Date: 2/05/204 Zone Center Code Center Name Branch Code Branch Name Subject Code Subject Full Name Exam Date 028 L.D.C.E 3 Biomedical 70304 Hospital management and clinical 7/05/204
More informationEXMAINATION TIMETABLE SECOND HALF B.E. (Sem VIII) (REV )(CBSGS) (All Branches) Examinations Time
Civil T4328 EXMAINATION TIMETABLE SECOND HALF -2017 B.E. (Sem VIII) (REV. -2012)(CBSGS) (All Branches) Examinations Time 11:00 a.m. To 02:00 p.m DAY THURSDAY WEDNESDAY THURSDAY WEDNESDAY TUESDAY TUESDAY
More informationJOMO KENYATTA UNIVERSITY OF AGRICULTURE AND TECHNOLOGY COLLEGE OF ENGINEERING AND TECHNOLOGY (COETEC)
JOMO KENYATTA UNIVERSITY OF AGRICULTURE AND TECHNOLOGY COLLEGE OF ENGINEERING AND TECHNOLOGY (COETEC) SELF-SPONSORED DEGREE PROGRAMMES IN ENGINEERING SEPTEMBER 2019 INTAKE Jomo Kenyatta University of Agriculture
More informationCollege of Engineering, Pune End Semester Examination Time - Table
Semester- II College of Engineering, Pune End Semester Examination Time - Table F. Y. B. Tech 2017-18 Date 27th April 2018 29th April 2018 2nd May 2018 4th May 2018 6th May 2018 8th May 2018 Day Friday
More informationSubject Collection Engineering Catalogue Year 2014 Product ID ISSN Product USD Catalogue Price
Subject Collection Engineering Catalogue Year 2014 Product ID ISSN 00336 0001-4575 00310 0094-5765 05605 1874-1029 05618 0894-9166 05481 1570-8705 02007 1474-0346 02000 0965-9978 09001 1270-9638 10029
More informationACHARYA NAGARJUNA UNIVERSITY TIME-TABLE FOR III/IV B.TECH. (1 st SEMESTER) (REGULAR) EXAMINATIONS OCTOBER 2014
ACHARYA NAGARJUNA UNIVERSITY TIME-TABLE FOR III/IV B.TECH. (1 st SEMESTER) (REGULAR) EXAMINATIONS OCTOBER 2014 TIME :: 10.00 AM to 01.00 PM MAX. MARKS : 70 Day & Date CE CHE CSE IT EC EE EI ME BT 22-10-2014
More informationSTATE BOARD OF TECHNICAL EDUCATION AND TRAINING: ANDHRA PRADESH::HYDERABAD 3 YEAR DIPLOMA COURSES TIME TABLE FORWRITTEN EXAMINATION C05-CCC
3 YEAR DIPLOMA COURSES TIME TABLE FORWRITTEN EXAMINATION C05-CCC Diploma in Automobile Engineering- April/May-2015 DAE I Year 2:00 PM-TO-5:00 PM 17-Apr-2015 CCA-101 English Common-101 20-Apr-2015 CCA-102
More informationClass: 5 th Semester (Old Scheme) Time: 11:00AM. NO: SBOTE/Exam/MJ17/ Dated: 11/09/2017. Page 1
Class: 5 th Semester (Old Scheme) Date Civil(PHE(Civil) Electrical Mechanical Automobile Wood Tech Food Technology Quantity Surveying Valuation Electrical Machine II RCC Structures Elect. Power I (T &
More informationB.TECH/MCA DECEMBER 2016
BIPIN TRIPATHI KUMAON INSTITUTE OF TECHNOLOGY DWARAHAT Schedule for THEORY PAPER EXAMINATIONS ODD SEMESTERS 2016-17 (REGULAR/BACK) B.TECH/MCA DECEMBER 2016 TENTATIVE SCHEDULE FOR THE END SEMESTER EXAMINATION
More informationOFFICE OF THE CONTROLLER OF TECHNICAL EXAMINATIONS TIME TABLE NOTIFICATION No. TX17/3653/18/CTE REVISION 2010
OFFICE OF THE CONTROLLER OF TECHNICAL EXAMINATIONS TIME TABLE NOTIFICATION No. TX17/3653/18/CTE Date: 05/10/18 DIPLOMA EXAMINATION IN ENGINEERING / TECHNOLOGY / MANAGEMENT / COMMERCIAL PRACTICE OCTOBER/NOVEMBER
More informationWhat are the most likely employment avenues (industry and roles) from your discipline of engineering. What industry are you in now?
Chemical Chemical processes, heat and mass transfer, process units, distillation Oil and gas, environmental work, food, pharmaceuticals, manufacturing Last one was oil and gas 8 around 70k I think Chemical
More informationAM BST-102 Engineering Chemistry 2 BST-201 Engineering Mathematics-II AM AM BET-103 Basic Electronics Engineering
EXAMINATION PROGRAMME FOR THE 2 ND SEMESTER 2018 SUMMER EXAMINATION (NEW COURSE. Sl. No. Subject Code Name of the Theory papers Date of Examination Time of Exam. 1 BST-101/ Engineering Physics/ 21.05.2018
More informationB.TECH/MCA DECEMBER 2017
BIPIN TRIPATHI KUMAON INSTITUTE OF TECHNOLOGY DWARAHAT Schedule for THEORY PAPER EXAMINATIONS ODD SEMESTERS 2017-18(REGULAR/BACK) B.TECH/MCA DECEMBER 2017 TENTATIVE SCHEDULE FOR THE END SEMESTER EXAMINATION
More informationEPD ENGINEERING PRODUCT DEVELOPMENT
EPD PRODUCT DEVELOPMENT PILLAR OVERVIEW The following chart illustrates the EPD curriculum structure. It depicts the typical sequence of subjects. Each major row indicates a calendar year with columns
More informationThe Career Center. Careers For Students Majoring In. What Can I Do With A Major In Engineering?
Careers For Students Majoring In ENGINEERING What Can I Do With A Major In Engineering? Any Engineering Discipline Production Sales and Marketing Management Consulting Research and Development Teaching
More informationResearch Categories Bioenergy Machinery Transportation. Seed Science Soil Soybeans Water
Agricultural Sciences General Ag Sciences Agricultural Economics & Policy Agricultural education International Agriculture Ag Engineering Agronomy Animal Science Biochemicals Bioenergy Machinery Transportation
More informationBritish Standards Institution (BSI) Complete British Standards Online Product Code Number: B00 (Internet and Extranet)
British Standards Institution (BSI) Complete British Standards Online Product Code Number: B00 (Internet and Extranet) Application Types of Data Standards issued by BSI (British Standards Institution)
More informationHIMACHAL PRADESH UNIVERSITY CONDUCT BRANCH SHIMLA-5.
Datesheet for B.Tech. 1 st Semester Regular for UIIT and Supplementary examinations for late College students of other Private Engineering Colleges to be held in December, 2013. Morning Session: Time:
More informationANNEXURE II. M.Tech./M.S.(Research) and M.Des. Programmes offered Department/Centre/School Interdisciplinary Programme. Code
M.Tech./M.S.(Research) and M.Des. s offered Department/Centre/School Interdisciplinary ANNEXURE II Code [A] M. Tech. s of Deptts./Centre/ School Applied Mechanics Applied Research in Electronics Atmospheric
More informationSubjects taken at UC-MEng which are recognized for credit transfer to the respective PolyU-MSc
Annex 1 Subjects taken at UC-MEng which are recognized for credit transfer to the respective PolyU-MSc Program: MSc Biomedical Engineering Equivalent subjects in UC MEng programs PolyU subjects contributed
More informationGujarat Technological University NO:GTU/ME3/Pract/Winter2017/ 7806 Date :24/10/2017
Gujarat Technological University NO:GTU/ME3/Pract/Winter2017/ 7806 :24/10/2017 Zone 1 002 INSTITUTE OF TECHNOLOGY, GOTA, M.E. Sem-3 Regular/Remedial Practical Exam Time Table Winter 2017 Name Time : 10.30
More informationGRADUATE PROGRAMMES Semester 1 Examination EXAM TIMETABLE
PAGE: 1 OF 8 08-Aug-2017 (Tue) SBS CLASSROOM 2 BS7007 PRACTICAL COURSE IN SOLUTION X-RAY SCATTERING 08-Sep-2017 (Fri) IGS SEMINAR ROOM 9.00 am-11.00 am IE7002 FUEL CELL SCIENCE & TECHNOLOGY 25-Sep-2017
More informationHaryana State Board of Technical Education, Panchkula Morning Shift: 9:00 AM and Evening Shift: 2:00 PM Final Datesheet for May 2017 Exam (Branchwise)
Haryana State Board of Technical Education, Panchkula Morning Shift: 9:00 AM and Evening Shift: 2:00 PM 6 Chem P&P I N & O 120012/030012 App. Maths - I 13-May-17 Evening 6 Chem P&P I N & O 120013/030013
More informationMAHARSHI DAYANAND UNIVERSITY ROHTAK B.TECH. 1 ST SEMESTER (RE-APPEAR) OLD SCHEME
B.TECH. 1 ST SEMESTER (RE-APPEAR) OLD SCHEME MECHANICAL.(M), ELECT.(EL), ELECTRONICS AND INS TRUMENTATION CONTROL(EIC), ELECTRONICS COMMUNICATION(ECE), COMPUTER ENGG. (CE) & INFORMATION TECHNOLOGY (IT)
More information