GUJARAT TECHNOLOGICAL UNIVERSITY. SEMESTER - II TEACHING SCHEME(IN Total EXAMINATION SCHEME COURSE COURSE TITLE CODE L T P
|
|
|
- Penelope Preston
- 5 years ago
- Views:
Transcription
1 GUJARAT TECHNOLOGICAL UNIVERSITY BRANCH :02 BRIDGE FOR DIPLOMA PROGRAMME IN AUTOMOBILE ENGINEERING C THERMODYNAMICS & HYDRAULICS TOTAL BRANCH :03 BRIDGE FOR DIPLOMA PROGRAMME IN BIOMEDICAL ENGINEERING C ADVANCED MATHEMATICS (GROUP-1) C BASIC PHYSICS (GROUP-2) C FUNDAMENTAL OF DIGITAL ELECTRONICS C HUMAN ANATOMY C HUMAN PHYSIOLOGY TOTAL
2 BRANCH :05 BRIDGE DIPLOMA PROGRAMME IN CHEMICAL ENGINEERING ADVANCED MATHEMATICS ( C GROUP-1) C ENGINEERING PHYSICS ( GROUP- 1) TOTAL BRANCH :06 BRIDGE FOR DIPLOMA PROGRAMME IN CIVIL ENGINEERING C ADVANCED MATHEMATICS(GROUP-2) C APPLIED MECHANICS C APPLIED CHEMISTRY ( GROUP-1 ) TOTAL
3 BRANCH :07 BRIDGE FOR DIPLOMA PROGRAMME IN COMPUTER ENGINEERING C ADVANCED MATHEMATICS (GROUP-1) C BASIC PHYSICS ( GROUP-2 ) C ADVANCED COMPUTER PROGRAMMING TOTAL BRANCH :09 BRIDGE FOR DIPLOMA PROGRAMME IN ELECTRICAL ENGINEERING Hrs THEORY PRACTICAL (L+T+P) ESE PA ESE PA C ADVANCED MATHEMATICS (GROUP-1) C BASIC OF CIVIL ENGINEERING C BASIC PHYSICS (GROUP-2) C D.C.CIRCUITS TOTAL GRAND TOTAL
4 BRANCH :11 BRIDGE FOR DIPLOMA PROGRAMME IN ELECTRONICS & COMMUNICATION ENGINEERING C ADVANCED MATHEMATICS (GROUP-1) C ELECTRONIC NETWORKS TOTAL BRANCH :13 BRIDGE FOR DIPLOMA PROGRAMME IN ENVIRONMENT ENGINEERING Hrs THEORY PRACTICAL (L+T+P) ESE PA ESE PA C ADVANCED MATHEMATICS(GROUP-2) C APPLIED MECHANICS C APPLIED CHEMISTRY (GROUP-1) C GRAND TOTAL BASIC MECHANICAL ENGINEERING TOTAL
5 BRANCH :16 BRIDGE FOR DIPLOMA PROGRAMME IN INFORMATION TECHNOLOGY C ADVANCED MATHEMATICS(GROUP-1) C BASIC PHYSICS (GROUP-2) C ADVANCED COMPUTER PROGRAMMING TOTAL BRANCH :17 BRIDGE FOR DIPLOMA PROGRAMME IN INSTRUMENTATION & CONTROL ENGINEERING C BASIC PHYSICS ( GROUP-2 ) C INSTRUMENT CONFIGURATION PRATICES TOTAL BRANCH :19 BRIDGE FOR DIPLOMA PROGRAMME IN MECHANICAL ENGINEERING
6 C ADVANCED MATHEMATICS (GROUP-2) C APPLIED MECHANICS C MATERIAL SCIENCE & METALLURGY C MECHANICAL DRAFTING C BASIC OF CIVIL ENGINEERING TOTAL BRANCH :20 BRIDGE FOR DIPLOMA PROGRAMME MECHATRONICS ENGINEERING C FUNDAMENTALS OF ELECTRONICS ENGINEERING C APPLIED MECHANICS C MECHANICAL DRAFTING TOTAL BRANCH :21 BRIDGE FOR DIPLOMA PROGRAMME IN METALLURGY ENGINEERING Hrs THEORY PRACTICAL (L+T+P) ESE PA ESE PA GRAND TOTAL
7 C C ENGINERING CHEMISTRY ( GROUP-2 ) FUNDAMENTAL OF MECHANICAL ENGINERING C BASIC PHYSICAL METALLURGY C METALLURGY DRAWING TOTAL BRANCH :23 BRIDGE FOR DIPLOMA PROGRAMME IN PLASTIC ENGINEERING C BASIC OF ELECTRICAL ENGINEERING C POLYMER CHEMISTRY TOTAL BRANCH :24 BRIDGE FOR DIPLOMA PROGRAMME IN POWER ELECTRONICS
8 C ADVANCED MATHEMATICS (GROUP-1) C BASIC PHYSICS (GROUP-2) C BASIC ELECTRONIC CIRCUITS C DIGITAL ELECTRONICS TOTAL BRANCH :28 BRIDGE FOR DIPLOMA PROGRAMME IN TEXTILE PROCESSING TECHNOLOGY C ENGINEERING PHYSICS (GROUP- 1) C ORGANIC CHEMISTRY C FIBER SCIENCE & TECHNOLGY TOTAL BRANCH :29 BRIDGE FOR DIPLOMA PROGRAMME IN TEXTILE MANUFACTURING TECHNOLOGY
9 Hrs (L+T+P) THEORY PRACTICAL GRAND ESE PA ESE PA TOTAL C ENGINEERING PHYSICS (GROUP- 1) C YARN MANUFACTURING-I TOTAL BRANCH :50 BRIDGE FOR DIPLOMA PROGRAMME IN ARCHITECTURAL ASSISTANTSHIP Hrs THEORY PRACTICAL (L+T+P) ESE PA ESE PA C ARCHITECTURAL DESIGN- II(SINGLE VOLUME) C ARCHITECTURAL DRAWING-II C C ADVANCED BUILDING MATERIALS HISTORY OF ARCHITECTURE(INDIAN) GRAND TOTAL
10 TOTAL BRANCH :55 BRIDGE FOR DIPLOMA PROGRAMME IN FABRICATION TECHNOLOGY C BASIC ENGINEERING DRAWING C APPLIED MECHANICS C ENGINERING CHEMISTRY ( GROUP-2 ) TOTAL BRANCH :59 BRIDGE FOR DIPLOMA PROGRAMME IN TEXTILE DESIGNING C TEXTILE PROCESSES-I C TEXTILE CRAFT-I C FABRIC DESIGN-I
11 C DRAWING SKETCHING & PAINTING-II TOTAL ESE : END SEMESTER EXAM ESE for Practical includes Viva/Practical exam/performance etc. PA: PROGRESSIVE ASSESSMENT PA for Practicals includes TW/Report writing/seminar etc. related to practices L: LECTURE PA for Theory includes Written Exam /Assignment/Quiz/Presentation or Combination of T: TUTORIAL all with prior intimation to the students at beginning of term P: PRACTICAL Note: For syllabus of Bridge Course refer as per table below: Bridge Course Code Regular Course code <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=>
12 C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=> C <=>
Business Economics & Accountancy [201-S] Principles of Management-II [211-S] Business Statistics-I [212-S] Conversational English-I [213-S]
![Business Economics & Accountancy [201-S] Principles of Management-II [211-S] Business Statistics-I [212-S] Conversational English-I [213-S]](/thumbs/86/93065600.jpg "Business Economics & Accountancy [201-S] Principles of Management-II [211-S] Business Statistics-I [212-S] Conversational English-I [213-S]")
Programme for the Diploma in /Technology (Fulltime Course) Part-I 2nd Semester Examination - June 2014 (For REGULAR students) Date Time All Branches except ARCH, MOPM, MT, PHO, DP ARCH MOPM MT PHO DP 04.06.2014
GUJARAT TECHNOLOGICAL UNIVERSITY
Subject Code Subject Name Date Time Branch 01: Aeronautical Engineering 160101 Aerodynamics-II 27-11-2013 02:30 To 05:00 160102 Fundamentals of Jet Propulsion 29-11-2013 02:30 To 05:00 160103 Vibration
Theory Examination Date Sheet for Diploma Courses Session Nov-Dec, Time: 11:00AM (Friday Timing: 10:00AM)
Class: 1 st Semester 15/12/2018 20/12/2018 26/12/2018 31/12/2018 04/01/2019 09/01/2019 ALL BRANCHS ECEPT MLT, OMCA, TT, TD, ARCH App. Physics-I Theory Examination Sheet for Diploma Courses Session Nov-Dec,
GUJARAT TECHNOLOGICAL UNIVERSITY
01 Aeronautical 160101 Aerodynamics-II 16/05/2011 160102 Fundamantals of Jet Propulsion 17/05/2011 160103 Vibration and Noise Control 19/05/2011 160104 Basic Control Theory 21/05/2011 160105 Computational
STATE BOARD OF TECHNICAL EDUCATION, BIHAR
Semester IV Diploma in Civil, Civil (Rural), Computer Science & Engg., Electrical, Electronics, Electronics & Communication Engg., Mechanical Engg. and Mechanical (Aumobile) Engg. Exam. 2014 (Even) Practical
Rajasthan Technical University, Kota jktlfkku rduhdh fo'ofo ky;]dksvk
![Rajasthan Technical University, Kota jktlfkku rduhdh fo'ofo ky;]dksvk](/thumbs/86/94436037.jpg "Rajasthan Technical University, Kota jktlfkku rduhdh fo'ofo ky;]dksvk")
Rajasthan Technical University, Kota jktlfkku rduhdh fo'ofo ky;]dksvk ATTENTION III SEM BACK STUENTS For all batches of III Semester of B.Tech./B.Arch. including Main, Back and old Back, there shall be
1. SALIENT FEATURES OF THE CURRICULUM FOR DIPLOMA COURSE IN TEXTILE PROCESSING. 1. Name of the Programme : Diploma in Textile Processing
1 1. SALIENT FEATURES OF THE CURRICULUM FOR DIPLOMA COURSE IN TEXTILE PROCESSING 1. Name of the Programme : Diploma in Textile Processing 2. Duration of the Programme : Three Years 3. Entry Qualifications
र ष ट र य प र द य ग क स स थ न प द च च र
FIRST SEMESTER - (2014 Regulation) HM101 MA101 PH101 CH101 CE101 CS101 CC101 ME101 COMMUNICATION IN ENGLISH I MATHEMATICS I PHYSICS I CHEMISTRY I ENGINEERING MECHANICS BASICS OF PROGRAMMING ENERGY & ENVIRONMENTAL
GUJARAT TECHNOLOGICAL UNIVERSITY
01 AERONAUTICAL 160101 AERODYNAMICS-II 160102 FUNDAMANTALS OF JET PROPULSION 160103 VIBRATION AND NOISE CONTROL 160104 BASIC CONTROL THEORY 160105 COMPUTATIONAL FLUID DYANAMICS -II 160106 AVIONICS 02 AUTOMOBILE
Course Title: Elements of Textile Technology (Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM Course Title: Elements of Textile Technology (Code: 3312801) Diploma Programmes in which this course is offered Textile Processing
Subject. Practical Papers 1"^ Sitting 2*^ Sitting. Theory Papers. Sixbject. Advance Library Classification Lab. Office Equipment & Services Lab
Semester V Diploma M.T. (Library Science) and MT. (Modern Office Practice), T.T. (Costume Design & Garment Making) and Architectural Assistantship Examination 2016 (Odd) 16.01.2017 to Sixbject Practical
GOVERNMENT OF KERALA ABSTRACT
GOVERNMENT OF KERALA ABSTRACT Higher Education Technical Equivalent / alternate subjects in Revision 2003 scheme to revised scheme and Revision 97 scheme Approved Orders issued HIGHER EDUCATION (L) DEPARTMENT
AM BST-102 Engineering Chemistry 2 BST-201 Engineering Mathematics-II AM AM BET-103 Basic Electronics Engineering
EXAMINATION PROGRAMME FOR THE 2 ND SEMESTER 2018 SUMMER EXAMINATION (NEW COURSE. Sl. No. Subject Code Name of the Theory papers Date of Examination Time of Exam. 1 BST-101/ Engineering Physics/ 21.05.2018
1. SALIENT FEATURES OF THE DIPLOMA PROGRAMME IN MECHANICAL ENGINEERING (TOOL AND DIE)
1. SALIENT FEATURES OF THE DIPLOMA PROGRAMME IN MECHANICAL ENGINEERING (TOOL AND DIE) 1) Name of the Programme : Diploma Programme in Mechanical Engineering (Tool and Die) 2) Duration of the Programme
Annexure D-I EVEN. Mapping of Courses vs CLOs vs PLOs
Mapping of Courses vs s vs Spring Semester (EVEN) TE 111 Textile Chemistry Process sufficient knowledge of Chemistry required to pursue in chemical processing. PO1 Determine physical/chemical properties
Class: 2 nd Semester (New Scheme)
Class: 2 nd Semester (New Scheme) 12/06/2019 14/06/2019 18/06/2019 21/06/2019 25/06/2019 28/06/2019 Civil/PHE Civil Electrical Mechanical Automobile Wood Tech Textile Tech Leather Tech Physics- Chemistry-
Course Title: Basics Engineering Drawing (Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM Course Title: Basics Engineering Drawing (Code: 3300007) Diploma Programmes in which this course is offered Automobile Engineering,
B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session
NA UNIVERSITY, CHENNAI - 600 5 APRIL/MAY- 28 For candidates admitted in Anna University,Chennai during Academic Years 21,22 & 23 PTCE22 PTGE2111 PTCE2254 PTCE22 PTCE2252 PTCE23 PTCE2255 PTGE21 PTCE2251
B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session
NA UNIVERSITY, CHENNAI - 600 5 NOVEMBER/DECEMBER- 27 For candidates admitted in Anna University,Chennai during Academic Years 21,22 & 23 PTCE22 PTGE2111 PTCE2254 PTCE22 PTCE2252 PTCE23 PTCE2255 PTGE21
CONTROLLER OF EXAMINATIONS. B.E CIVIL ENGINEERING (PART TIME) Subject Name. Exam Date. Session
NA UNIVERSITY, CHENNAI - 600 5 NOVEMBER/DECEMBER- 28 For candidates admitted in Anna University,Chennai during Academic Years 22 & 23 PTCE22 PTGE2111 PTCE22 PTCE2252 PTCE2254 PTCE23 PTCE2255 PTGE21 PTCE2251
OFFICE OF THE CONTROLLER OF TECHNICAL EXAMINATIONS TIME TABLE NOTIFICATION Date: REVISION 2010
No. TX17/40/17 OFFICE OF THE CONTROLLER OF TECHNICAL EXAMINATIONS TIME TABLE NOTIFICATION Date: 10-10-2017 DIPLOMA EXAMINATION IN ENGINEERING / TECHNOLOGY / MANAGEMENT / COMMERCIAL PRACTICE OCTOBER/NOVEMBER
2. The re-examination application link on the portal will be active during the below mentioned period:
IMPORTANT INSTRUCTIONS TO CANDIDATES 1. All the eligible students who have enrolled in the Academic Year 2014-2015 onwards in the first year of the program are hereby informed to apply for the respective
HIMACHAL PRADESH UNIVERSITY CONDUCT BRANCH SHIMLA-5.
Datesheet for B.Tech. 1 st Semester Regular for UIIT and Supplementary examinations for late College students of other Private Engineering Colleges to be held in December, 2013. Morning Session: Time:
OFFICE OF THE CONTROLLER OF TECHNICAL EXAMINATIONS TIME TABLE NOTIFICATION REVISION 2010 SEMESTER I
OFFICE OF THE CONTROLLER OF TECHNICAL EXAMINATIONS TIME TABLE NOTIFICATION No. D1/976/2019/CTE Dated : 07/03/2019 DIPLOMA EXAMINATION IN ENGINEERING / TECHNOLOGY / MANAGEMENT / COMMERCIAL PRACTICE APRIL
VISVEWARAIAH TECHNOLOGICAL UNIVERSITY, BELGAUM SCHEME OF SYLLABUS
SCHEME OF SYLLABUS - 2010 III SEMESTER B.TECH. (TEXTILE TECHNOLOGY)/ B.TECH. (SILK TECHNOLOGY) Theory Duration 1. 10TX31 Textile Polymer Science 2. 10TX32 Textile Fibres 3. 10TX33 Yarn Manufacture-1 4.
BOARD OF TECHNICAL EDUCATION, UTTAR PRADESH Question Paper Account for Special Back Paper Examination (December Exam)
Page 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 0001 DESIGN OF STEEL & MASONARY STRUCTURES 0002 TRANSPORTATION ENGINEERING 0003 DESIGN OF
SAVITRIBAI PHULE PUNE UNIVERSITY
S- 165/2014 SAVITRIBAI PHULE PUNE UNIVERSITY EXAMINATION CIRCULAR No. 165 of 2014 Programme of the M.E. 2013 Credit Pattern (Sem. I & II ) (All Branches) Examination, Nov. - 2014. Instructions to the Candidates:
06 March Day Date All Streams. Thursday 03 May 2018 Engineering Mathematics II. Saturday 05 May 2018 Engineering Physics
/ SCHOOL OF TECHNOLOGY MANAGEMENT &ENGINEERING FINAL EXAMINATION TIME TABLE (ACADEMIC YEAR: 2017 18) MASTER OF BUSINESS ADMINISTRATION IN TECHNOLOGY MANAGEMENT (2017-22) YEAR: I, SEMESTER: II CAMPUS: MUMBAI,
KURUKSHETRA UNIVERSI TY KURUKSHETRA. REVISED Date-Sheet for B.Tech. Engineering Ist Semester Examination commencing w.e.f
UNIVERSI TY REVISED Date-Sheet for B.Tech. Ist Semester Examination commencing w.e.f. 7.1.2012. Time of Examination: 2.00 P.M. onwards (Evening Session) DATE AND DAY REFERENCE NO./SUBJECT AND PAPER JANUARY,
Bleaching Technology for Textiles Course Code: GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. Course Curriculum
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT Course Curriculum BLEACHING TECHNOLOGY FOR TEXTILE (Code: 3332801) Diploma Programmes in which this course is offered Textile Processing Technology
WEST BENGAL STATE COUNCIL OF TECHNICAL & VOCATIONAL EDUCATION & SKILL DEVELOPMENT
Programme for the Diploma in Engineering/Technology (Fulltime Course) PartI 1st Semester Examination December 2017 For New Syllabus started from the Academic Session 201314 Date Time For ALL Disciplines
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM. Course Title: Textile Craft - I Course Code:
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM Course Title: Textile Craft - I Course Code: 3325902 Diploma Programmes in which this course is offered Diploma in Textile Designing
SAVITRIBAI PHULE PUNE UNIVERSITY
147/ S - 2014 SAVITRIBAI PHULE PUNE UNIVERSITY Examination Circular No. 147 of 2014 Programme of S. E. [ All Branches 2008 AND ] ( Semester I & II ) Examinations, October,, 2014. INSTRUCTIONS FOR CANDIDATES
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. COURSE CURRICULUM COURSE TITLE: DYEING TECHNOLOGY FOR SYNTHETIC TEXTILE (Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: DYEING TECHNOLOGY FOR SYNTHETIC TEXTILE (Code: 3342802) Diploma Program in which this course is offered Textile Processing
KURUKSHETRA UNIVERSITY KURUKSHETRA
UNIVERSITY Date-Sheet for the B. Tech. Engineering (II SEMESTER) Examination commencing w.e.f. 18.6.2012 (THEORY EXAMINATION) Time of Examination: 2.30 P.M. onwards (EVENING SESSION) Date and Day Ref.
SATHYABAMA INSTITUTE OF SCIENCE AND TECHNOLOGY (DEEMED TO BE UNIVERSITY)
SEMESTER: I BATCH: JUN 2018 Branch: ECE 21.07.2018 SEE1202 Electromagnetic Theory 22.07.2018 SEC1207 Digital Logic Circuits 28.07.2018 SEC1205 Electronic Circuits - I 29.07.2018 SEC1209 Analog Communication
SAVITRIBAI PHULE PUNE UNIVERSITY
SAVITRIBAI PHULE PUNE UNIVERSITY (Formerly University of Pune) EXAMINATION CIRCULAR NO.29 OF.2018 SECOND YEAR(2008,2012/2014 & 2015 COURSE)ENGINEERING Examination of APR/MAY-2018 (Under Faculty of SCIENCE
T.E. (CGPA) (All Branches) Sem-V & VI (New/Old) Examinations May, 2018
T.E. (CGPA) (All Branches) & VI (New/Old) NORTH MAHARASHTRA UNIVERSITY, JALGAON Circular No.155 of 2018 Programme of T. E. CGPA [ All Branches (Sem. V & VI ) Course : Course : July, 2014 (New) And Course
Avinashilingam Institute for Home Science and Higher Education for Women Coimbatore
Avinashilingam Institute for Home Science and Higher Education for Women Coimbare 641 043 Time table for Bachelor of I Semester Examination November 2011 (2011 Batch) Date and Day 9.11.2011 11.11.2011
ORGANISATIONAL DETAILS FOR CAMPUS RECRUITMENT PROCESS. Name: Designation: Cell: Landline: Fax:
ANNA UNIVERSITY, CHENNAI 600 025 CENTRE FOR UNIVERSITY INDUSTRY COLLABORATION cuic@annauniv.edu, cuic.annauniv@gmail.com (9444222262, 044 22352370 / 22358991 / 22358994) ORGANISATIONAL DETAILS FOR CAMPUS
Gujarat Technological University. BE Sem -7 Practical Exam Time Table Summer Exam 2014 (For All Zone Students)
NO:GTU/BE7/Prac/Summer4 Date: 2/05/204 Zone Center Code Center Name Branch Code Branch Name Subject Code Subject Full Name Exam Date 028 L.D.C.E 3 Biomedical 70304 Hospital management and clinical 7/05/204
(a) Red, (b) Blue (c) Green (d) Pink (e) Purple (f) White. (Assignment) Section - B. Bachelor of Arts Programme (B.A.)
(a) Red, (b) Blue (c) Green (d) Pink (e) Purple (f) White 01 Subject Title: Basic Design Course Code : UGTD-01 Maximum Marks : 1. Explain the following principles of design : 6 (a) Contrast (b) Harmony,
The Open University of Sri Lanka
The Open University of Sri Lanka The Open University of Sri Lanka (OUSL) was established in 1980 under the University Act No.16 of 1978. It has the same legal and academic status as any other national
UNIVERSITY OF PUNE. Examination Circular No. 04 of Examinations, May,, INSTRUCTIONS FOR CANDIDATES
UNIVERSITY OF PUNE 04/ F - 2014 S.E. ( All Branches ) May, 2014 Examination Circular No. 04 of 2014 Programme of S. E. [ All Branches 2008 AND ] ( Semester I & II ) Examinations, May,, 2014. INSTRUCTIONS
OFFICE OF THE CONTROLLER OF TECHNICAL EXAMINATIONS TIME TABLE NOTIFICATION No. TX17/3653/18/CTE REVISION 2010
OFFICE OF THE CONTROLLER OF TECHNICAL EXAMINATIONS TIME TABLE NOTIFICATION No. TX17/3653/18/CTE Date: 05/10/18 DIPLOMA EXAMINATION IN ENGINEERING / TECHNOLOGY / MANAGEMENT / COMMERCIAL PRACTICE OCTOBER/NOVEMBER
Principles of Management-II [211-S] Business Statistics-I [212-S] Business Economics & Accountancy [201-S]
![Principles of Management-II [211-S] Business Statistics-I [212-S] Business Economics & Accountancy [201-S]](/thumbs/82/86586222.jpg "Principles of Management-II [211-S] Business Statistics-I [212-S] Business Economics & Accountancy [201-S]")
Programme for the Diploma in /Technology (Fulltime Course) PartI 2nd Semester Examination June 2018 (Syllabus commenced from the Academic Session 20132014) All Branches except ARCH, MOPM, MT, PHO, DP ARCH
FACULTY OF MECHANICAL ENGINEERING
FACULTY OF MECHANICAL ENGINEERING established in 1959 in 1973 in 1975 in 1976 in 1985 from 1995 College of Engineering and Technology Department of Mechanical Engineering Department of Textile Technology
THE NATIONAL INSTITUTE OF ENGINEERING, Mysore UG - Semester End Examination Schedule - December 2014
5/12/2014 1 1 1 CV0413 Quantity Surveying & Estimation Computer Concept & C Programming CV0418/CV0501 Mechanics of Deformable Bodies CV0419/CV0201 Building Materials & Construction CV0420/CV0402 Mechanics
The Federal Polytechnic, Nasarawa
The Federal Polytechnic, Nasarawa List of Programmes Applied Sciences Agricultural Technology Agricultural Technology Hospitality Management Diploma in Cooperative Economics Management Hospitality and
K. J. SOMAIYA POLYTECHNIC, MUMBAI Final Time Table
SOMAIYA VIDYAVIHAR'S K. J. SOMAIYA POLYTECHNIC, MUMBAI 400 077 AUTONOMOUS SEMESTER TERM END EXAMINATION FOR DIPLOMA PROGRAMME Ref.No.KJSP/EXAM/2014-15/886 FULL TIME & PART TIME 20-Apr-15 05-May-15 Tuesday
ENGINEERING What can I do with this degree?
ENGINEERING What can I do with this degree? ANY DISCIPLINE Production Sales and Marketing Management Consulting Research and Development Teaching Law AEROSPACE Propulsion Fluid Mechanics Thermodynamics
Theory Examination Date Sheet for Diploma Courses Session Nov-Dec,
2 Class: 6 th Semester(OLD SCHEME) Date Civil /Civil(PHE) Electrical Mechanical Automobile Wood Tech E&C 12/12/2 14/12/2 16/12/2 18/12/2 Steel and Timber Structures and Drawing Repair & Buildings Control
(Common to E&E /MECHATRONICS/ HPT/ WSM/TEXTILE /MINING/CERAMICS/AGRICULTURE ENGG./ AERONAUTICAL ENGG./LEATHER & FASHION TECHNOLOGY Programmes)
Government of Karnataka Department of Technical Education Board of Technical Examinations, Bengaluru Course Title: ENGINEERING Course Code: 15ME01D DRAWING Semester : I / II Core/ Elective: Core Teaching
To understand the concept of basic engineering mechanism Compulsory : MANUFACTURING TECHNOLOGY II. Office phone
BME505 - MANUFACTURING TECHNOLOGY II Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME505 - MANUFACTURING TECHNOLOGY II Fifth
Practical Papers 1 st Sitting 2 nd Sitting. Theory Papers. (ii) Fashion Apparle (C.D.G.M.) :00 P.M. to 5:00 P.M.
STATE BOARD OF TECHNICAL EDUCATION, BIHAR Part III Diploma Library Science, Modern Office Practice and Costume Design & Garment Making Supplementary Examination 2012 (S) EXAMINATION PROGRAMME Date Time
Preview Day Preview Day 2018
Engineering Begins Here! Students building their foundation to create the future Engineering Begins Here! Brett Hamlin, Assistant Chair and Faculty, Engineering Fundamentals Amy Monte, Academic Advisor
Garment Tech /Fashion Designing(old & new scheme) Arch Asstt.(ol d & new. MLT(new. scheme) Free Hand Sketchin g App. Physics-I
Class: 1 st Semester (New /Old Scheme) Sheet for Diploma Courses Session Nov-Dec, Time: 11:00 AM 26/12/ 28/12/ 01/01/2018 03/01/2018 06/01/2018 09/01/2018 ALL BRANCHS ECEPT MLT, OMCA, TT, TD, ARCH(for
ANNEXURE II. M.Tech./M.S.(Research) and M.Des. Programmes offered Department/Centre/School Interdisciplinary Programme. Code
M.Tech./M.S.(Research) and M.Des. s offered Department/Centre/School Interdisciplinary ANNEXURE II Code [A] M. Tech. s of Deptts./Centre/ School Applied Mechanics Applied Research in Electronics Atmospheric
Invitation for SMEs from associate partner institutions preparing a course under NPTEL
Invitation for SMEs from associate partner institutions preparing a course under NPTEL Criteria for faculty interested in preparing courses under NPTEL: PhD from a recognized university with experience
Drafting and Design 1A
Syllabus Drafting and Design 1A Overview This one-semester course is intended as a practical, hands-on guide to help you understand the various techniques, standards, and tools used in drafting and design.
THE KENYA NATIONAL EXAMINATIONS COUNCIL
THE KENYA NATIONAL EXAMINATIONS COUNCIL KNEC/GEN/TD/PSE/TEC/TT/18 2018 JUNE/JULY TECHNICAL EXAMINATIONS TIMETABLE 1.0 GENERAL INSTRUCTIONS 1.1 The time allowed for each paper is indicated against the name
Reg. No. : Question Paper Code : B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER Second Semester.
WS 20 Reg. No. : Question Paper Code : 27273 B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2015. Second Semester Civil Engineering GE 6252 BASIC ELECTRICAL AND ELECTRONICS ENGINEERING (Common to all
Research Categories Bioenergy Machinery Transportation. Seed Science Soil Soybeans Water
Agricultural Sciences General Ag Sciences Agricultural Economics & Policy Agricultural education International Agriculture Ag Engineering Agronomy Animal Science Biochemicals Bioenergy Machinery Transportation
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: COMPUTER INTEGRATED MANUFACTURING ( COURSE CODE: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: COMPUTER INTEGRATED MANUFACTURING ( COURSE CODE: 3385506 ) Diploma Programme in which this course is offered Fabrication
DOKUZ EYLUL UNIVERSITY COURSE / MODULE / BLOCK DETAILS ACADEMIC YEAR / SEMESTER. Course Code: TDL 1002
Offered by: ORTAK ZORUNLU DERSLER BÖLÜM BAŞKANLIĞI Course Title: Turkish Language II Course Org. Title: Türk Dili II Course Level: Lisans Course Code: TDL 100 Language of Instruction: Türkçe Form Submitting/Renewal
WHAT WE OFFER CONSTRUCTION TRADES LIGHT, SOUND & VIDEO BUSINESS MANAGEMENT MECHATRONICS HEALTH CAREERS PLTW ENGINEERING
WHAT WE OFFER Equipping students with the skills necessary to obtain high-skilled employment is a top priority for Bemidji Area Schools! Through community collaboration and intentional coursework design,
M. Phil. / Pre. Ph. D. New Syllabus Paper Faculty of Science
THE FINAL PROGRAMME SHIVAJI UNIVRSITY, KOLHAPUR Circular No. 401 Exam Final Programme of the M.Phil. / Pre.Ph.D. Examination to held in April/May 014. 1. Students should see their Seat No. and Name in
Structural Analysis Control System Engineering Cim Elective I Computer Graphics for Cad/Cam. Advanced in Operating System Design
Sr No Name of Branch RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY **** MTECH,ME,MDES, MARCH FIRST SEMESTER EXAMINATION OF summer 2015 # PROGRAMME( WRITTEN ) # MTech,ME,MDes,MArch FIREST SEMESTERsummer
र ष ट र य प र द य ग क स स थ न, र उरक ल
र ष ट र य प र द य ग क स स थ न, र उरक ल National Institute of Technology, Rourkela NITR/AC/UG-PG/2018/L/2190 dt: 29-06-2018 Advertisement for Admission to Master of Technology [Sponsored Advertisement for
DATE & DAY MONDAY
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD KUKATPALLY - HYDERABAD 500 085 E X A M I N A T I O N B R A N C H III YEAR B.TECH-I SEMESTER -R15 REGULATION- SUPPLEMENTARY EXAMINATIONS APRIL/MAY-2018
College of Engineering
College of Engineering Experience American Higher Education in the Gulf American University of Sharjah, founded in 1997, is a not-for-profit, independent, coeducational institution of higher education
Course Structure : Lectures Tutorials Practical s Credits 2-4 6
Department Course Code Course Title Course Category : MECHANICAL ENGINEERING : A10301 : ENGINEERING DRAWING : Core Course Structure : Lectures Tutorials Practical s Credits 2-4 6 I. Course Overview: One
IDEAL EDUCATION MANAGEMENT &TECHNOLOGY
Diploma in Electrical Engineering (DEE) Subjects Covered Electrical Engg. Electric Circuit Power Generation Basic Electronics Solid State Devices & Circuits Switching Theory & Logic Design Electro Magnetic
International Office Date: FACT SHEET 2019/2020 The University Name Erasmus Code City, Country Website Technische Hochschule Lübeck D LUBECK03 Lübeck, Germany http://www.th-luebeck.de Address Mönkhofer
SEMESTER: I BATCH: Branch: CSE
SCHOOL OF COMPUTING SATHYABAMA UNIVERSITY SEMESTER: I BATCH: 2017-2021 Branch: CSE 15.09.2017 SCS1102 Fundamentals of Programming 18.09.2017 SMT1101 Engineering Mathematics I 21.09.2017 SCS1101 Problem
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. COURSE CURRICULUM COURSE TITLE: PLANT MAINTENANCE AND SAFETY (Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: PLANT MAINTENANCE AND SAFETY (Code: 3341906) Diploma Programme in which this course is offered Mechanical Engineering,
GTU- Centre of Excellence in Automation
Gujarat Technological University Centre of Excellence in Automation LABS UNDER CENTER OF EXCELLENCE Hydraulic Lab. Pneumatic Lab. Sensor Lab. Programmable logic controller(plc) Robotics & Mechatronics
CENTRE FOR DISTANCE EDUCATION ACHARYA NAGARJUNA UNIVERSITY:: NAGARJUNA NAGAR (A.P)
B.Tech., (Civil / Mechanical / EEE / EC / Computer Science) Examinations, MAY-2013. FIRST YEAR 20-05-13 22-05-13 24-05-13 26-05-13 28-05-13 30-05-13 01-06-13 12-06-13 TIME: 2.00 PM to 5.00 PM Subject Max.
College of Engineering Pune
College of Pune Semester- I End Semester Examination 2018-19 F. Y. B. Tech Date 26th Nov 2018 28th Nov 2018 30th Nov 2018 2nd Dec 2018 4th Dec 2018 6th Dec 2018 Day Monday Wednesday Friday Sunday Tuesday
ENGLISH-HUMANITIES PATHWAY
ENGLISH-HUMANITIES PATHWAY Art-Design-Creative Arts Aboriginal Studies Ancient Studies History PRE- PRE- Aboriginal Studies History Indonesian Aboriginal Studies Communications or Studies History Indonesian
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: FABRICATION TECHNOLOGY-II (Code: 3345505) Diploma Programme in which this course is offered Semester in which offered
Department of Mechanical Engineering
UNDERGRADUATE COURSES Curriculum for the Degree of Bachelor of Science in Mechanical Engineering: General s 6-0-05 6-0-0 6-0-04 6-0-05 6-0-0 6-0-0 5-0-7 5-0-0 5-0-0 5-0-0 5-0-04 6-0-4 6-0-0 6-0-0 6-0-0
Day & Date Course No. Branch. EN Engineering Physics
1 MAHATMA GANDHI UNIVERSITY TIMETABLE FOR B.TECH DEGREE EXAMINATIONS, MAY/JUNE2018 Ref: Notification No. EA I/1/352/2018 dated 23.03.2018 Semester I & II (New Scheme) (2010 -Admission onwards - Supplementary)
Type of Course: Tutorials & Practice. Course Outcomes CL Linked PO
Government of Karnataka Department of Technical Education Board of Technical Examinations, Bangalore DIPLOMA IN APPAREL DESIGN AND FABRICATION TECHNOLOGY SIXTH SEMESTER Title: COMPUTER AIDED DESIGN Credits
Analog circuit design ( )
Silver Oak College of Engineering & Technology Department of Electronics and Communication 4 th Sem Mid semester-1(summer 2019) Syllabus Microprocessor & Interfacing (2141001) 1 Introduction To 8-bit Microprocessor
ELECTRONICS AND INSTRUMENTATION (For the State of Haryana)
1 ELECTRONICS AND INSTRUMENTATION (For the State of Haryana) 1. SALIENT FEATURES OF THE PROGRAMME 1) Name of the Programme : Diploma Programme in Electronics and Instrumentation 2) Duration of the Programme
Hours L S E A TOTAL
Curriculum 1 st year Subject Hours L S E A ECTS 1 st semester 450 30 Information technologies 30 0 30 0 60 4 Aesthetics of textiles and clothing 30 30 0 0 60 4 English for specific purposes 0 60 0 0 60
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. Course Curriculum. PRINTER S SCIENCE (Course Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT Course Curriculum PRINTER S SCIENCE (Course Code: 3335802) Diploma Programs in which this course is offered Printing Technology Semester in which offered
Sponsored (Rs. Cr.)
Sponsored Research Projects Undertaken Financial Year 2013 14 2014 15 2015 16 Sponsored Research Projects Numbers 150 68.65 164 87.10 136 72.44 2016 17 2017 18 158 282 140.21 417.19 Department wise Summary
28/05/2016 Saturday MH7103: Traditional and Contemporary Landscapes
Page 1 of 28 M.Arch. MH7101: Contemporary Processes in Architectural Design I MH7102: Urban Conservation and Practice MH7103: Traditional and Contemporary Landscapes MH7112: Urban Design Studio MH7111:
GRADES K-5. Form Introduce form as an element of design.
MATERIALS, METHODS, AND TECHNIQUES Drawing Draw using a variety of materials. (pencils, crayons, water-based markers, oil crayons and chalk) Draw from memory, imagination, or observation. Express individual
Cal Poly Pomona SUMMARY OF CURRICULAR CHANGES
Legend PREFIX# = Course Number; TITLE = Course title or title change; NEW = New Course; REV = Revised Courses that have undergone substantial changes; DEL = Deletion; UNITS/UNIT CHANGES = Unit value or
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. Course Curriculum ANALOG ELECTRONICS. (Code: ) Electronics and Communication Engineering
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT Course Curriculum ANALOG ELECTRONICS (Code: 333110) Diploma Programme in which this course is offered Semester in which offered Electronics and Communication
END SEMESTER EXAMINATIONS MAY / JUNE 2015 TIME TABLE UG Semester VIII Session : A.N Time: Friday
UG Semester VIII Session : A.N Time: 02.00 05.00 CIVIL MECH POLY EEE 04.05.15 CE 411 Bridge ME 408 Operations Research and Systems Analysis PT 406 Polymer Recycling and Waste Management EE 407 Solid State
Subject Description Form
Subject Description Form Subject Code Subject Title Credit Value BRE222 Workshop Practices and Draftsmanship 3 Academic Credits Level 2 Pre-requisite/ Co-requisite/ Exclusion Objectives Nil 1) Provide
Scientific Research Journals Publication Open Access Journal Publisher (Online and Print)
Scientific Research Journals Publication Open Access Journal Publisher (Online and Print) http://www.srjournals.com CALL FOR PAPER FIRST ISSUE (JAN APR 06) Greetings from Scientific Research Journals Publication
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: SOFTWARE LAB PRACTICE (CODE: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: SOFTWARE LAB PRACTICE (CODE: 3351104 ) Diploma Programmes in which this course is offered Electronics and Communication
35. Costume Designs and Dress Making I Garment Technology
DESIGNATED SUBJECT FIELDS IN ENGINEERING& TECHNOLOGY COVERED UNDER THE APPRENTICES (AMENDMENT) ACT, 1973. ~ ( J J ij! j i 1. Aeronautical 2. Agricultural 3. Agriculture and Irrigation 4. Air Craft Maintenance
Course Title: Electronic Practice (Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM Course Title: Electronic Practice (Code: 3312401) Diploma Programmes in which this course is offered Mechatronics Engineering Semester
GUJARAT STATE LEVEL ELIGIBILITY TEST
GUJARAT STATE LEVEL ELIGIBILITY TEST Code No. : 23 Subject : HOME SCIENCE SYLLABUS AND SAMPLE QUESTIONS Note : There will be two question papers, Paper II and Paper III. Paper II will cover 50 Objective