Ranch Chicken Coop. (102.4 in.l63.0 in.w75.7in. H)

Size: px

Start display at page:

Download "Ranch Chicken Coop. (102.4 in.l*63.0 in.w*75.7in. H)"

Charlotte Bishop
5 years ago
Views:

SKU: 1237423 Ranch Chicken Coop (102.4 in.l*63.0 in.

1 SKU: Ranch Chicken Coop (102.4 in.l*63.0 in.w*75.7in. H) Distributed by: TRACTOR SUPPLY COMPANY 5401 VIRGINIA WAY, BRNTWOOD, TN or customer support, call: MAD IN CHINA 1

CAR INSTRUCTIONS SATY INORMATION: WARNING: Please keep children out of assembly area during assembly. WARNING: This product is designed exclusively for chickens. Not intended for children.

2 CAR INSTRUCTIONS SATY INORMATION: WARNING: Please keep children out of assembly area during assembly. WARNING: This product is designed exclusively for chickens. Not intended for children. BOR YOU BGIN: Read instruction prior to assembly. This product contains parts that can be damaged if incorrectly assembled. Please follow instructions. or steps where parts are placed upside down, place parts on a smooth surface to avoid scratching finish. Locate a flat level surface area to assemble and place coop for best results. PR-ASSMBLY: TOOLS RQUIRD (not included): Power tool with Phillips Head Bit Adjustable Wrench Ruler Two people are recommended to assemble this product. PRODUCT OVRALL VIW 2

3 PARTS LIST Part Image Description Quantity 1 Left Roof Panel 2pcs R L 2 Right Roof Panel 2pcs 3 Right Coop Panel 4 Left Coop Panel 5 Left Run Panel 6 L R ront&back Run Panel 2pcs 3

4 7 ront Middle Run Panel 8 Back Middle Run Panel 9 Right Side Run Panel 10 ront Coop Panel 11 Back Coop Panel 12 Side Panel of Nesting Box 13 loor Panel of Nesting Box 14 4 Nesting Box Lid with hinges

5 15 Drawer Base rame 16 Drawer 17 Ladder 18 Roof cap 19 Roof cap 20 Door Panel Top Cap 21 Nesting box divider 3pcs 22 Wooden Support Bars 6pcs 23 Wooden Support Bars 2pcs 24 Roosting Bar 2pcs 5

6 A Screws 12mm 4+s B Screws 14mm 14+s C Screws 30mm 2pcs D Screws 35mm 16+s Screws 40mm 58+2pcs Screws 50mm 16+s G Door pull lever H Support Arm 1pair 6

7 CAUTION: If using a cordless power drill / screwdriver, turn torque setting down to a minimum level to start so that screws are not stripped. Adjust torque up slightly if needed to fully tighten screws. ASSMBLY INSTRUCTION Step 1: Attach the ront Coop Panel (10) and the Back Coop Panel (11) to the Right Side Run Panel (9) using screws ()*4pcs. Step 2: Attach the Right Coop Panel (3) and the Left Coop Panel (4) using screws ()*12pcs as shown

8 Step 3: Place the Drawer Base rame (15) in place first, and then place the Drawer (16). Install the Roosting Bar (24) as shown Step 4: Attach the Side Panel of Nesting Box (12) using screws()*4pcs as shown. *** Note: You must open the chicken run door first to install 2 of the screws () *2 pcs as seen in the picture below

9 Step 5: Place the loor Panel of Nesting Box (13) into the nesting box. And then install the Nesting Box Dividers(21) as shown. 21 Step 6: Mount the Nesting Box Lid with hinges (14) to the coop using screws(b)* 6pcs as shown. 14 9

10 Step 7: Open the nesting box lid, and attach the Support Arm(H) using screws(b)* 8pcs. ***Note the different direction of support arms. B H R H L Step 8: Attach the Ladder (17) to the coop using screws(c)*2pcs as shown

11 Step 9: Attach the ront Middle Run Panel (7) and Back Middle Run Panel (8) to the coop using screws ()*6pcs as shown. 8 7 Step 10: Attach the ront & Back Run Panel (6) using screws ()*6pcs as shown. 6 L 6 R 11

12 Step 11: Attach the Left Run Panel (5) to the run panels using screws ()*6pcs as shown. 5 Step 12: Attach the Door Panel Top Cap (20) to the left run panel, using screws ()*2pcs as shown. 12

13 Step 13: Locate the Right Roof Panel (2) and position it on the ground with wooden frame side up and the metal extension on your left side as seen in the picture below. Next place the Wooden Support Bars (22) in place on the wooden frame (see picture below) and secure in place with 3 screws each (). ***NOT: The orientation of the wooden support bar before screwing in place. The Angle cut should be facing the center of the panel with the long end of the angle on top as noted in picture. This allows the roof panel to be "self-centered" when placed on top of coop and secure into place. Then place the roof on the right side as shown using screws(d)*8pcs. ***Please note that the right place of the support bar as shown. You shall leave 3.7inches from one side, and 8.58inches on the other side as shown below in 2 R D in X 2 D 2 L 3.7in 8.58in 13

14 Step 14: Next, place the Left Roof Panel (1) on the ground with wooden frame facing up. Position the Support Bars (22, 23) in place as per picture below and secure in place with 3 screws each (). ***NOT: The orientation of the wooden support bar before screwing in place. The Angle cut should be facing the center of the panel with the long end of the angle on top as noted in picture. This allows the roof panel to be "self-centered" when placed on top of coop. Then place the roof on the left side as shown and secure in place using screws (D)*8pcs. ***Please note that the right place of the support bar as shown. You shall leave 3.7inches from one side, and 8.58inches from the other side as shown below X L 1 R D D 14

15 Step 15: Attach Roof caps(18)(19) using screws ()*8pcs. inally,use screws (A) to secure the overlap of metal roof as shown in picture below. 18 A A 19 Step 16: Place the Door Pull Lever(G) through hole in panel, and secure into place by threading into door hardware located at the center of the sliding coop door. G 15

16 inished Coop 16

CHICKEN COOP & CHICKEN RUN. Tools required for assembly (not included)

CHICKEN COOP & CHICKEN RUN. Tools required for assembly (not included) CHICKEN COOP & CHICKEN RUN ASSEMBLY MANUAL SKU# 6839 Tools required for assembly (not included) Distributed by: TRACTOR SUPPLY COMPANY 0 VIRGINIA WAY, BRENTWOOD, TN 3707 For customer support, call: -888-376-960