BIG LOTS ASSEMBLY INSTRUCTIONS 6PCS PU DINING SET ITEM NO. BIG-178 SKU NO

Transcription

1 BIG LOTS ASSMBLY INSTRUCTIONS 6PCS PU DINING ST ITM NO. BIG-178 SKU NO Big Lots Customer Care Phone #: BIGLOTS( ) mail Add: 'For spare screws and bolts, please contact big lots customer care' 1

2 GNRAL INFORMATION, TIPS & TRICKS 1. Please read the assembly instructions prior to assembling this product. 2. To avoid damages, assemble this product on a non-abrasive surface such as carpet. 3. Make sure all bolts and nuts are tightly fastened before the product is used. 4. Not for commercial use. 5. Care: Wipe with a damp cloth. Use furniture polish or lemon oil on the wood as needed. Avoid prolonged exposure to moisture. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. We recommend two people to assemble. A Phillips head screwdriver is necessary for assembly. Do not put hot pots or objects which are more than Fahrenheit 80 degrees directly on the table. 2

3 TABL PART LIST A B A. TABL TOP 1 PC B. TABL LG 4 PCS TABL HARDWAR LIST 1. FLAT WASHR 2. SPRING WASHR 3. NUT 4. OPN WRNCH QTY: 8 PCS QTY: 8 PCS QTY: 8 PCS QTY: 1 PC 3

4

5 TABL ASSMBLY INSTRUCTIONS DIAGRAM #1 RQUIRD HARDWAR IN THIS STP NO. DSCRIPTION SKTCH QTY 1. FLAT WASHR 8 PCS 2. SPRING WASHR 8 PCS 3. Attach the legs (B) to the apron of table top (A) using 8 flat washers (1), 8 spring washers (2), and 8 nuts (3) as shown. 3. NUT 8 PCS 4. OPN WRNCH 1 PC B B A 5

6 DIAGRAM #2 TABL ASSMBLY INSTRUCTIONS 3. Turn the table upright. Make sure the table is level, and tightly fasten all nuts (3) using the open-end wrench (4) as shown. The Table is now ready for use 6

7 CHAIR PART LIST C C. CHAIR BACK 4 PCS D. SAT FRAM 4 PCS. FRONT LG 8 PCS F. SAT BOARD 4 PCS F D CHAIR HARDWAR LIST 1. FLAT WASHR 2. SPRING WASHR 3. NUT 4. OPN WRNCH QTY: 44 PCS QTY: 44 PCS QTY: 16 PCS QTY: 1 PC 5. SHORT BOLT 6. LONG BOLT 7. WOOD SCRW SIZ: 1-3/4" L x 1/4" DIA QTY: 12 PCS SIZ: 3" L x 1/4" DIA QTY: 16 PCS 7 SIZ: #8 x 1-1/2" L QTY: 24 PCS

8 CHAIR ASSMBLY INSTRUCTIONS DIAGRAM #3 RQUIRD HARDWAR IN THIS STP NO. DSCRIPTION SKTCH QTY 1. FLAT WASHR 4 PCS 2. SPRING WASHR 4 PCS 3. NUT 4 PCS D Attach 2 front legs () to seat frame (D) using 4 nuts (3), 4 spring washers (2) and 4 flat washers (1) as shown. Note: The seat frame (D) has two screw holes on each side, which are used to attach the seat. These holes are wider on the bottom and narrower on the top. nsure the wider holes are facing towards you. 8

9 C 9

10 F D C 4. Place seat board (F) upside down on a non-abrasive table surface. The rear (tapered end) of the seat board (F) should be near the table edge. Hint: Protect the non-abrasive table surface and seat board (F) by laying a towel in-between the seat board and table. 5. Place the assembled chair frame on the seat board (F) as shown. Attach with 6 wood screws (7). Tighten the screws. 10

11 11

12 BNCH PART LIST G H G. CUSHION 1 PC. FRONT LG 4 PCS H. SAT FRAM 1 PC BNCH HARDWAR LIST 1. FLAT WASHR 2. SPRING WASHR 3. NUT 4. OPN WRNCH QTY: 8 PCS QTY: 8 PCS QTY: 8 PCS QTY: 1 PC 7. WOOD SCRW SIZ: #8 x 1-1/2" L QTY: 8 PCS 12

13 BNCH ASSMBLY INSTRUCTIONS DIAGRAM #7 RQUIRD HARDWAR IN THIS STP NO. DSCRIPTION SKTCH QTY 1. FLAT WASHR 8 PCS 2. SPRING WASHR 8 PCS 3. NUT 8 PCS 4. OPN WRNCH 1 PC Attach 4 front legs () to seat frame (H) using 8 nuts (3), 8 spring washers (2) and 8 flat washers (1) as shown. Note: The seat frame (H) has several screw holes on each side, which are used to attach the cushion. These holes are wider on the bottom and narrower on the top. nsure the wider holes are facing towards you. 13

14 DIAGRAM #8 BNCH ASSMBLY INSTRUCTIONS RQUIRD HARDWAR IN THIS STP NO. DSCRIPTION SKTCH QTY 7. WOOD SCRW 8 PCS 4. Place cushion (G) upside down on a non-abrasive table surface. Hint: Protect the non-abrasive table surface and cushion (G) by laying a towel in-between the cushion and table. 5. Place the assembled bench frame on the cushion (G) as shown. Attach with 8 wood screws (7). Tighten the screws. 14

15 DIAGRAM #9 BNCH ASSMBLY INSTRUCTIONS The bench is now ready for use. Printed in Vietnam 15