CABLE ROD

Transcription

1 CABLE ROD

2 diameter Rod shown here, top to bottom, with a Single Shelf R., a Single Panel R., and a Double Panel R.7 gives a stronger, more linear appearance to shops than the slender profiles of. CABLE ROD Here, The Wall Fixing Plate and Tensioner is one way to secure the to a wall. For all the ways can be suspended, see page 0. and Rod are systems that suspend shelves, graphics, displays, and even lighting. A complete shop outfitted with either or Rod is light in look, and flexible for ever-changing merchandise mixes

3 Window Display for Electronics Window Display for Electronics Window Display for Accessories Window Display for Women s (T.) Track T. Electrified L..00 Sorbetti Box For W/. Connectors (50) Telescopic Lamp Holder S.Vc Power Feed Connector L./ PAIR Power Feed L. / METER 00W L..00 Nylon End Stop-Black L. Tensioner For L. Track Fixing T.L Shelf Shelf (5-/" X 5" X /") 0 Watt Bulb L.5 Entire Setup: approx. 0"H x 7"W (T.) Track T. T. End Stop And Top Fixing Set T. Track Tensioner And Bottom Fix Set Mm Stainless Steel.5 / M. Removeable Panel 5"W X 5"D X "H Box Shelf Off Assembly (50) Client Graphic - On /" Foam Core Entire Setup: approx. 0"H x 7"W T. Track T. Mm Stainless Steel.5 / M T. End Stop And Top Fixing Set T. Track Tensioner And Bottom Fix Set.9 Top Edge 9" Box Shelf W/ Shelf s Graphic - X on /" Foam Core Entire Setup: approx. 0"H x 0"W Sorbetti Clear Female Mannequin Mm Stainless Steel.5 / METER. Double Sided Panel (For Graphics). Removeable Panel End Stop For. Double Ended Hook /. Fixing Plate. Tensioner For. Custom Graphic On /" Foam Core Entire Setup: approx. 0"H x 7"W Item # 90 $ $ $ $5.00 $.00 $.00 $.50 $.50 $.50 $0.50 $0.50 $7.00 $.50 $,7.00 Item # 90 $ $ $ $ $,70.00 Window Display for Cosmetics Sorbetti Clear Male Mannequin /-0 X /" Button Head Cap Screw Small Puck (" Diameter) Spacer Puck Round " Faceout Mm Stainless Steel.5 / M 0.9 Top Edge. (T.) Track T. T. End Stop And Top Fixing Set 0 T. Track Tensioner And Bottom Fix Set 0 Custom Graphic On /" Foam Core Custom Panel On /"Hardboard/MDF Entire Setup: approx. 0"H x 0"W Custom Graphic on /" Foam Core ". Removeable Panel " " Box Shelf - " Thick W/ s (50) Mm Stainless Steel.5 / M Fixing Plate. End Stop For. Tensioner For. Entire Setup: approx. 0"H x 7"W $.50 $,0.00 Item # 90 $ $ $ $.50 $9.00 $95.00 $, Window Display for Men's Item # 700 $ $ $ $.00 00G $ $ $ $ $ $9.50 $.50 $.00 Item # Window Display for Accessories (T.) Track T. T. End Stop And Top Fixing Set $9.00 Mm Stainless Steel.5 /M $.00 Scissy 5" Diameter Round Base $.00 Scissy Tube - 0" Length $.00 Scissy Inch Box (500) $.00. $9.00 T. Track Tensioner $,0.00 And Bottom Fix Set.9 Top Edge Custom Graphic On /" Foam Core Entire Setup: approx. 0"H x 7"W N ind.co m 0 Item # $.50 $9.50 $.00 $05.00 $.50 $5.00 $ $.50 $9.00 Item # 7009 $ $.00 $ $ $ $ $ $ $,9.00 The or Solid Panel, shown here, is one way to hang heavy glass or acrylic panels, from signage to architectural surfaces. They accommodate thicknesses up to /". $,

4 Track is important to consider when oftenchanged displays are needed. The is easily slid to a different location. Both Mini and Maxi function the same way in track. 9 Window Display for Cosmetics T. Track T. End Stop And Top Fixing Set T. Track Tensioner And Bottom Fix Set Mm Stainless Steel.5 / M.9 Top Edge Scissy Tube - " Length Scissy 5" Acrylic Shelf Assembly Scissy 5" Diameter Round Base Custom Graphics On /" Foam Core Entire Setup: approx. 9"H x 7"W Item # Window Display for Shoes $.50 $9.50 T. Track T. End Stop And Top Fixing Set T. Track Tensioner $.50 And Bottom Fix Set $.00 Mm Stainless Steel.5 / M $9.00 Scissy 5" Diameter Round Base $5.00 Scissy Tube - " Length $5.00 Scissy 5" Acrylic Shelf Assembly $05.00 Custom Graphics On /" Foam Core $. $,0.00 Entire Setup: approx. 0"H x 7"W 0 N ind.co m $.50 $9.50 $.50 $.00 $05.00 $5.00 $5.00 $$.00 $, Window Display for Accessories (T.) Track T. T. Track Tensioner And Bottom Fix Set Mm Stainless Steel.5 / M.9 Top Edge Telescoping Stand With Square Shelf Custom Graphics On /" Foam Core Entire Setup: approx. 9"H x 7"W Item # Window Display for Electronics Item # 90 $ $.50 $.00 $9.00 $0.00 $$, (T.) Track T. Mm Stainless Steel.5 / M T. Track Tensioner And Bottom Fix Set.9 Top Edge Telescoping Stand With Square Shelf Custom Graphics On /" Foam Core Entire Setup: approx. 9"H x 7"W Item # $.50 $.00 $.50 $9.00 $0.00 $$, Here, Top Edge.9 is shown in both Mini and Maxi. They accommodate panel thicknesses up to /", and are commonly used for signage, graphics, or ceiling-suspended sculptural panels

5 Window Display for Women's Shoes Pully Wheel On Plate.7 " Spacer Rod..5 Mm Stainless Steel / METER Fixing Plate. Tensioner For. 7"W X 5"D X "H Box Shelf Off Assembly End Stop For.. Removable Picture/ Panel Custom Graphics On /" Foam Core Entire Setup: approx. 0"H x 9"W Bottom Wall Fixing. Tensioner For.. Spacer Rod 0 Item # $5.50 $5.00 $.00 $.00 $ $5.00 $ $9.00 $$, Setup for Accessories Setup for Men's " W X 5" D X " H Offset Box Shelf Off Assembly same as 979 but. is offset 0 Mm Stainless Steel.5 / M End Stop For. Fixing Plate. Entire Setup: approx. 9"H x 50"W The Spacer Bar, above, is used to keep the s a consistent distance of 7 7/" apart, the perfect location for shelf grips. Below left, the Bottom Wall Fixing is installed with two End Stops to begin the vertical run of. Item # $.00 $9.00 $ $.00 $.00 $.00 $.00 $,95.00 Fixing Plate. 0 Tensioner For. 0 Mm Stainless Steel.5 /METER 0 End Stop For. 0 Sorbetti Clear Male Mannequin Puck Basic " Saddle Mnt. Hangrail Face-Out.7 Shelf 0 Cross Bar " O/C Cross Bar " O/C " Spacer Bar 5 /" X 7/" X /" Shelf 5 " Minipog Hangrail Faceout Entire Setup: approx. 0"H x 0"W N ind.co m Rod Setup for Shoes Mm Rod (000Mm) R. Bottom Fixing R. Ceiling Fixing R. Single Shelf Shelf -.5 X.75 Single Panel Double Panel Custom Graphics on /" Foam Core Entire Setup: approx. 7"H x 9"W Item # $7.00 $7.00 $.50 $7.50 $0.50 $.00 $.50 $, Rod in Chrome gives a linear and modern look to shelving and graphics. Here, the Single Shelf with /" dia. Rod can hold shelf thicknesses up to /". Shown is Rod in, contact your Sales Representative to find out more about finishes other than the stock satin anodized. Track Setup for Men's Item # $.00 $9.00 $.00 $.00 $ $ $0.50 $7.00 $55.00 $.00 $.00 $.50 $,.50 Bottom Wall Fixing. Isolated Spacer Rod.I Electrified L..00/ METER Fixing Plate. Tensioner For L. Nylon End Stop-Black L. Telescopic Lamp Holder S.Vc Power Feed L. / METER Power Feed Connector L./ PAIR.7 Shelf Shelf (" X.75" X.75") 00W 0 Watt Silver MR Light Bulbs L.S Entire Setup: approx. 0"H x 7"W 5 Item # $.00 $5.00 $7.50 $.00 $.50 $.50 $5.00 $.00 $ $0.50 $.00 $.50 $.50 $,

6 Maxi Maxi Shelf and Accessory s mm System is immensely strong when correctly installed. Maxi has been tested up to 00 lbs. The range is available in as standard, but is also available in brass, polished, stainless steel, and black anodized. Installation Suspension Options Shelf Will hold shelves up to /" thick.7/907 $ 0.50 General Purpose (removable) for rails, shelves etc..0/905 $.00 Maxi wall to wall Maxi wall to floor Maxi ceiling to floor Maxi Track ceiling to floor Maxi wall to wall Maxi Track wall to wall Maxi suspended Maxi T-Bar Mount Maxi Suspension Parts Fixing Plate /" diameter for fixing to ceiling, floor or wall./905 $.00 Bottom Wall Fixing To be used in conjunction with items.7 and../9057 $.00 0 End Stop for Can be used to secure the cable to items.,. and.. The cable is pushed into one end of this component and secured by tightening two grub screws./905 $.00 Fixing Plate with Extended Arm 5/" overall from wall. Can be used in place of..9/90 $.00 mm (/") Stainless Steel Sold by the meter, and can be cut to any length.5/900 $.00/meter Pulley Wheel on Fixing Plate. Enables cable to be tensioned from a wall or ceiling to support shelves or other display items.7/90 $ 5.50 Tensioner for Secured to the cable by tightening two opposing grub screws. This tensioner can be used in conjunction with items.,. and../9059 Double Ended Hook For use with tensioner. or end stop.. /907 Double Sided Tensioner Accepts cables from both ends../ 90 $.50 Track: T./90 $.50 / meter End Fixing To attach end stop. and cable tensioner. to vertical posts when using cable as staircase balustrade. Specifier to ensure M5 studs are welded to posts./907 T-Bar Mount Can be used to suspend cable from " T-bar ceiling. Static load: 00 lbs. Only available in white. 90 $.00 N ind.co m Spacer Rod Between cables when using item.7 and.9, in a wall-to-wall or wall-to-floor application (see above). Keeps the cables spaced 5mm (") from the wall 00mm (") apart. A pair is required for each run../90 $ 5.00 Maxi mm (/") End Stop and Top Fixing Set to fit track T. T./90 $ 9.50 Track Wall, ceiling or floor fixed, into which Maxi mm (/") assemblies can be fixed. Stocked and sold in meter (7 /") lengths. /" x /" square extrusion. Available in only. Maxi mm (/") Tensioner and Bottom Fixing Set to fit track T. T./905 $.50 Top Edge For suspending panel from end of cable. Holds /" thick.9/907 Double Sided Shelf Will hold shelves up to /" thick.5/907 $ 0.50 Wall Fixed Shelf For up to /" thick shelves./9 $ 9.50 Removable Picture/Panel Will hold pictures or /" thick./907 Swivel Multi-directional clamp for panels and shelves up to /" thick Single Swivel.7S/950 $ 5.00 Double Swivel.7D/95 $ 0.00 Double Sided Removable Picture/Panel Will hold pictures or /" thick./90 $ 7.50 Shelves for Maxi Timber Panel or Shelf Used to attach wood shelves or other wood materials to cables./907 $ 0.50 Maxi Wall Fixed Disc diameter /". Will hold pictures or panels up to /" thick. Requires /" hole drilling in panel./90 $.50 or Solid Showing disc on face of panel. Panel requires drilling w/ /" holes. Gap for panel is /" wide, not adjustable./900 $.00 Picture Hook with Front Grub Screw Holds panels up to /" thick./9079 $.00 and Steel Shelf s Shelf requires drilling /" holes./90 Channels, Rails, Spacer Bars and Crossbars Wall Fixed with Front Grub Screw Disc diameter /". Holds pictures or panels up to /". No drilling of panel required. Also available for /" or /" thick panels /".9/97 $ 9.50 /".9/97 $ 9.50 /".9/979 $ 9.50 Allen Key for cable fixing grub screws on Maxi system Holds panels up to /" thick.k/90 $.00 " Thick Acrylic Box Shelves Sorbetti Acrylic (. Shelf s included) " - "l x 5"w color $.00 " - 5"l x 5"w 95 - color $ " Thick Acrylic Box Shelves Sorbetti Acrylic (. Shelf s included) " - 7"l x 5"w x 7" thick 9- color $ 5.00 " - 7"l x 5"w 97 - color $ 5.00 " Thick Acrylic Offset Box Shelves Sorbetti Acrylic (. Shelf s included) " - "l x 5"w color $.00 " - 5"l x 5"w color $ Tempered Shelves " x " /"l x 7/"w x /" 9 $.00 5 /" x 5" 5 /"l x 5"w x /" 9" - 95"l x 5"w 9 $ 5.00 x 7" thick 99- color " x " $ /"l x 7/"w x /" 9 $.00 " - 7"l x 5"w color $ 5.00 " x " 5 /"l x 7/"w x /" 9 " x " 5 /"l x 7/" x /" 9 $.00 Literature and Graphic Holders For Maxi and Mini Continuous Channel To be used at the top and bottom, for supporting glass or solid panels up to 5/" thick, other sizes available, call 00mm for quote (5 /").0A/9075 $ mm ( /").0B/907 $ mm (7 /").0C/077 $ 9.50 Single Hanging Rail " diameter brushed finish. " o.c. (Actual length 5" long) MA.7/9 " o.c. (Actual length 7" long) MA.7/ 97 $ 5.00 " o.c. (Actual length 9" long) MA.7/ 95 $ 5.00 Spacer Bar Used in conjunction with Crossbars 95, 9, and 97 to create sidehanging bars, 5/" overall length, and separates the s " apart. 950 $.00 Crossbars Used with Spacer Bars (979) to create sidehanging bars. " Crossbar 97 $ " Crossbar 9 $.00 " Crossbar 95 $ 7.00 Angled Literature Holder 9"w x /"d x "h /" clear acrylic MA.9A/ 9 $.50 Literature Holder 9"w x /"d x "h /" clear acrylic MA.9/97 $.50 Poster Holder 9 /"w x / "h clear acrylic MA./ 9 $ Sorbetti Square Corner Signholders Material: pc acrylic, image size same "h x.5"w 70 $.00 "h x "w 7 $ 5.00 "h x "w 77 $ 5.00 "h x "w 7 $ Sorbetti Square Built-Up Signholder Graphic Size: /" x 0 /" Material: clear acrylic "h x "w 70 $ Sorbetti Box for 5"w x 5"h x 5"d Sorbetti Acrylic ( -. Shelf s included) 90 - color $ Sorbetti Offset Box for Same as previous with offset grips to use when Maxi application is wall-to-wall or wall-to floor color $ "h x "w 705 $ 7.00 "h x "w 70 $ 9.50

7 Lighting A fully integrated low voltage lighting system using mm (/") diameter powered cable to carry a wide range of display, general, or decorative lamp holders. Tested for weights up to 00 lbs. L..00 L.B Electrified Components.00 BLE Electrified mm (/"). interwoven tinned copper, clear PVC coated. Used when combining integral lighting with L.B applications. This cable can carry up to 00VA L..00/ 90 $ 7.50/meter AluminumL.B Fixing Plate /" dia., for ceiling, wall or floor L../905 $.00 L. L.9B L.B L.9B.i L..00 Nylon Ceiling Fixed Stabilizer/ used to support cable between the fixing plates on long cable L. runs. Length of post determined by ceiling mounted. plate L. black L.B/979 $ 0.50 white L.B L.W/90 $ 0.50 L.9B Track Wall, ceiling or floor fixed, into which Maxi mm (/") assemblies L.B can be fixed. Stocked and sold in meter (7 /") lengths. /" x /" square extrusion. Available in L.9B only. T./90 $.50/meter Nylon Ceiling Mounted Stabilizer/ same application as item L., but with a post height of /" in length, black L.9B/9 $ 5.00.i white L.9W/9 $ 5.00 Track Fixing slides along the track, item T., to any desired position and grips items L. and L. T.L/9 $ 0.50 T. L. L. Fixing Plate. Isolated Nylon End Power Feed L. Tensioner Stop Tensioner L. used to isolates the End Connector tension the power from False Ceiling Line L.L. cable, with L. the fixing the nylon plate secured to L.B L. General Purpose central barrel the cable by the T. support.0 isolating the same method as power from T.Litem L.. This the fixing nylon end stop L.0 L.B plate. The may be secured L.0 cable is pushed to item. Lamp Holder S.V into one end of black Bulb L this component L.B/97 and secured by $.50 L.B tightening two white grub screws, the L.W/9 T.L other end can $.50. then bel.9b secured to., Secondary L.00B or Track Fixing Power L.00B Graphic T.L for use in Feed L.0 Track. supplies the black v current L.B/95 from the $.50 transformer white to the lighting L.W/9 cables, power $.50 track and rod (black only) L. L./9 Inline $.00 Tensioner accepts cable L.00B Electrified End from both L.00 Connectors ends for cable, and the L. d central nylon brass finish barrel is L./9 used to isolate $.00 long cable runs, allowing a End Stop L. L.0 L.B transformer L.B T. Fixing Plate. T. to be used at each end of the L. L.0 cable run Lighting Application Example black L.7B/99 Electrified Power Supplies $.00 Isolated Spacer L.Rod white L.7W/9 This is used in 00VA Capacity L.B $.00 conjunction withl.b T.L items.7 and Available in L.00B T.L. when it is a black or white, L.B wall fixed system. with ' power T. L.0 It spaces the first cord, UL listed L.00B cable /" L.00B/ from wall and 909 keeps the two $.50 drops of cable 00mm (7 7/") 0VA Capacity apart Black only Black End: L.B L/97.L/97 $ 9.50 $ 5.00 T.L White End: L.00B.L/95 $ 5.00 ELECTRIFIED CABLE RIFIED CABLE ABLE.i N ind.co m L.00 Power Feed L Track T. Slide Fixing T.L Tensioner L. End Connector L Lamp Holder SV Electrified L.00 Bulb L Panel. Panel. End Stop L. Slide Fixing T.L Track Lighting and Graphic Application Example Track T. Low Voltage Lighting for Electrified Available in Chrome (C) or Black (B). Call your sales representative for Pricing. 0w silver L.S/90 $.50 TZ.C Cross Bar Rotating Lamp ( and Rod Fitting) TZ.C Call for price TZ.C S.C Standard Lamp Holder Chrome S.C Call for price S.5DC Double Panel/ Picture Lamp Holder Material: S.5DC Call for price S.5SC 0w black L.B/997 $.50 S.VC Single Panel/ Picture Lamp Holder S.5SC Call for price Telescopic Lamp Holder Vertical, min. max. span: " " S.VC/9 $ 5.00 Low Voltage Dichroic and Halogen Lamps ranging from narrow spot to 0 superflood, 50 watt and 0 watt available with silver and black finishes to match lamp fitting finish w silver L.S/99 $.50 Edura LED 7 watt MR bright white dimmable LED floor light: 7w black & silver 970 $.50 50w black L.B/9 $.50

8 Mini Mini Shelf and Accessory s Used mostly for graphics, the.5 mm (/") Mini System has been tested up to 00 lbs. The range is available in anodized as standard, but is also available in brass, stainless steel, polished and black anodized. Mini Suspension Parts Economini End Stop secures ceiling fixing in place. The cable is passed through cover cap and end stop is secured to cable by a single grub screw. Thread cover cap onto ceiling fixing plate to secure 5./900 $.00 Bottom Wall Fixing to be used in conjunction with items 5., 5.5, 5.9 and /900 $ 0.00 Tensioner and Bottom Fixing secures floor fixing plate in place. The cable is passed through tensioner cover cap and end stop is secured to cable by single grub screw. Thread tensioner cover cap onto floor fixing plate and tighten until cable is taut 5./90 $ 7.00 Extended Arm 75mm (-5/") overall from wall). Can be used and fixed as item /907 $.50 Fixing Plate 5mm ( /") diameter for fixing to ceiling, floor or wall. When fixed to wall, cables run vertically and provide a wall fixed display system 5./900 $.00 Pulley Wheel on Fixing Plate. This item enables cable to be tensioned from a wall or ceiling to support shelves or other display items 5.9/9009 $ 5.50 End Stop for can be used to secure the cable to items 5. or 5.. The cable is pushed into one end of this component and secured by tightening two grub screws 5./900 $.50 Double Ended Hook for use with tensioner item 5.5 or end stop item /907.5mm (/") Stainless Steel sold by the meter, and can be cut to any length 5./900 $.50 /meter Tensioner for secured to the cable by tightening two opposing grub screws onto the cable. This tensioner can be used in onjunction with items 5. and /9005 $ 7.00 Tensioner accepts cables from both ends. 5./ 90 $ 7.00 Spacer Bar for cables using item 5.9 that are supported from the ceiling. Keeps the cables spaced at 00mm (7 7/") in order to accept shelving. Custom sizes available 5./ 90 $ 5.00 Spacer Rod used in conjunction with item 5.9 and 5. when it is a wall fixed system. It spaces the first cable 0mm ( /") from the wall and keeps the two drops of cable 00mm (7 7/") apart 5.0/ 900 T-Bar Mount Can be used to suspend cable from " T-bar ceiling. Static load: 00 lbs. 90 $.00 Mini Track Suspension Mini.5mm (/") stainless steel cable 5. Mini.5mm (/") tensioner and bottom fixing set T5. ET5. Mini.5mm (/") End Stop and Top Fixing T5. Floor fixed track. T. T5. Track Wall, ceiling or floor fixed, into which Mini.5mm (/") assemblies can be fixed. Stocked and sold in meter (7 /") lengths. /" x /" square extrusion. Available in only. T./ 90 $.50 /meter End Stop and T5. Top Fixing Set to fit track T. T5./ 9097 $.00 Tensioner and Bottom Fixing Set (shown above and right) to fit track T. T5./909 $.00 N ind.co m Economini ET5. End Stop to Fit Track T.. Floor to ceiling track only ET5./ 979 $.00 Economini Tensioner to Fit Track T. Floor to ceiling track only ET5./ 979 $.50 Shelf holds shelves up to /" thick 5./900 Single Panel will hold panels up to /" thick 5./9 or Solid showing disc on face of panel. Panel requires drilling with /" holes. Panel max /" thick. Gap for panel /" is not adjustable 5./905 $.00 Double Sided Shelf will hold shelves up to /" thick 5./979 $.50 Double Panel will hold panels up to /" thick 5.9/95 $ 5.00 Picture Hook w/ Front Grub Screw supports panels up to /" thick 5./90 $.00 Shelf will hold shelves up to /" 5./90 $.00 Removable Picture/Panel holds pictures or /" thick 5./90 Mini Wall Fixed (Disc diameter /") holds pictures or /". Requires /" hole drilling in panel 5.7/99 $ 0.00 Double Sided Shelf will hold shelves up to /" 5./ 90 $ 0.50 Wall Fixed Shelf for shelves up to /" 5./9599 $ 9.50 Double Sided Removable Picture/Panel holds pictures or /" 5./90 $ Left and Right Angle used for holding angled literature holder. Literature holders can be made to individual requirements (i.e. number of pockets and sizes etc.). Sold as a set only. 5.5/9 $.50 Wall Fixed Micro (Disc diameter /") holds pictures or /" thick. Requires /" hole drilling in panel.5/9 $.00 Continuous Channel to be used at the top and bottom, for supporting glass or solid /" thick 5.A/ 90 (5 /") $ Timber Panel or Shelf used to attach wood shelves or other wood materials to cables 5.9/909 $.00 Top Edge for Suspending Panels from End of holds /" thick 5./959 $ 9.50 General Purpose For rails, shelves etc. 5./90 $.00 Top Edge for suspending panel from end of cable. Holds /" thick 5.0/900 and Steel Shelf (removable) shelf requires drilling with /" holes 5./90 Swivel Multi-directional clamp for panels and shelves up to /" thick Single swivel grip 5.0S/ 95 $ 5.50 Double swivel grip 5.0D/ 90 $ 7.50 Allen Key For cable fixing grub screws on mini system. 5.K/90 $.00 5.B/ 90 ( /") $ C/ 90 (7 /")

9 POWER FEED RL. RL..5 Rod R..5 R..5 Rod Lighting R.C R.5C The Rod components come in a stock finish of. For other finishes, black, brass, stainless steel, and satin d brass contact your sales representative. The Rod Lighting components are available in d brass as standard but are also available in brass, and satin d brass. Rod Connection Parts Rods available in 9 /" and 9 /" lengths. The Rods link by screwing together. Required lengths are achieved by trimming off any surplus from the female end R..5/995 x 500mm (9 /") L $.00 R..5/90 x 500mm (9 /") L $.00 R..0/ 90 x 000mm (9 /")L $ 7.00 R..0/ 90 x 000mm (9 /") L $ Rod Shelf and Accessory s Ceiling Fixing screws to ceiling and receives threaded end of Rod R./99 $.50 R./90 $ 5.50 Floor Fixing Tensioner Screws to floor and receives cut end of Rod R./99 $.50 R./9 $ 5.50 Cross Fixing for securing two Rods at right angles to each other R./95 $ 0.50 R./9090 $ 0.00 Single Rod Wall Mounting /" dia. length /" for securing Rod parallel to wall R./909 $ 7.50 R./99 $.50 R. R. Double Rod Wall Mounting for wall mounted fixing of two right angles to each other R./9 $ 7.50 R./95 $.00 Single Rod Wall End Fixing universal end fixing for securing Rod at right angle to wall R./9 $ 7.50 R. R.5 R. R.7 R.0 R. R. R./959 $.50 R.9 R. L..00 Rod Lighting Connection Parts 5 7 RL. Typical Rod Lighting Installation Detail. Fixture Header. Fixing RL.. Single Shelf R.. Shelf (Not to exceed /" thick) 5. Polo RL.P. Fixture Base 7. Rod w/ Power Feed Connector RL..0P. Power Feed To L. (/") Diameter Rod available in 500mm (9 /") and 000mm (9 /") lengths, but can be easily cut with a hacksaw and joined, d brass 500mm (9 /") RL..5/ 95 $ mm (9 /") RL..0/ 95 $.50 L. Low Voltage Lighting for Electrified Rod Available in Chrome (C) or Black (B). Call your sales representative for Pricing. RL..5 RL.C Tension Fixing Screws to floor and receives cut end of rod, d brass RL./9 RL.P $.50 RL. RL. R.5C R.C R.C R.7C R.C L.0 L. R.7C Standard Elongated Isolated Isolated Mount Mount for for securing Securing Rod rod to ceiling or to ceiling or wall wall and spaced and spaced off by /", off by 5 9/". d brass (w/ power-feed RL./9 POWER connector), FEED $.50 d brass RL.C/97 $.50 RL.P RL.C RL.pc/ 905 $ 5.50 Polo Top/ Bottom Fixing RL.P/905 $.00 Secondary Power Feed supplies the v current from the transformer to the lighting cables, power track and rod (black only) L./9 $ mm (9 /") length with a powerfeed connector RL..5P/ 957 $ mm (9 /") length with a powerfeed connector RL..0P/ 959 $ 5.00 Single Shelf for electrical units, d brass, includes nylon tipped allen screws R.C/90 $.00 R.C/9 $.00. L. TZ.C TZ.C S.C S.5SC Single Shelf (up to /"). Includes nylon tipped allen screws R./99 $ 7.50 R./90 ` $ 0.00 Double Shelf (up to /"). Includes nylon tipped allen screws R.5/909 $ 5.50 R.5/90 $ 9.50 Single Shelf for shelving that exceeds /" thick (This component is screw-fixed to the underside of the shelf) R.9/9 $.50 R.9/9 $.00 Double Shelf for shelving that exceeds /" thick. This component is screw fixed to the underside of two shelves R.0/97 $.50 R.0/99 Single Panel (up to /") R./9095 $.00 R./905 $ 0.00 Double Panel (up to /") R.7/9 R. $.50 R.7/907 $ 9.50 requires /" hole drilling in panel. Gap for panel is /" fixed R.5/9 $ 7.50 R.5/90 $.50 Double Sided R. requires /" hole drilling in panel. Holds /" thick R.5D/977 $ D/9 $.00 Picture Hook w/front Grub Screw R.5D holds panels up to /" thick R./9 $ 5.50 R./90 $.50 ROD PARTS (INCLUDING ELECTRIFIED ROD).i L..00 Allen Key L.B For cable fixing grub screws on Mini system. 5.K/90 $.00. L.9B L.B L.9B Cross Bar Rotating ( and Rod Fitting) TZ.C Call for Offset Rotating ( and Rod Fitting) TZ.5C Call for Cross Bar Multipoise ( and Rod Fitting) TZ.C Call for Offset Multipoise ( and Rod Fitting) TZ.C Call for Crossbar Disc L. Rotating (Ceiling and Panel Fitting) L. TZ.C Call for Fork Rotating ( and Rod Fitting) TZ.7C Call for L.0 Crossbar Disc Multipoise POWER (Ceiling EXAMPLE and Panel Fitting) Z.C Call for L.00B Fork Multipoise ( and Rod Fitting) TZ.C Call for Standard Lamp Holder Material: Chrome L.00B S.C QUOTE L.0 00VA Capacity Available in black or white, comes with ' power cord UL listed L.00B/ 909 $ L.00B.50 L. Single Panel/ Picture Lamp Holder Material: Chrome S.5SC QUOTE L.0 0VA Capacity Black only L/97 $ 9.50 L.00B Double Panel/ Picture Lamp Holder Material: Chrome S.5DC QUOTE Electrified Rod Power And Lighting Supplies Low Voltage Dichroic and Halogen Lamps ranging from narrow spot to 0 superflood, 50 watt and 0 watt available with silver and black finishes to match lamp fitting finish POWER EXAMPLE 0w silver L.S/90 $.50 0w black L.B/997 $.50 50w silver L.S/99 $.50 50w black L.B/9 $.50 Edura LED 7 watt MR bright white dimmable LED floor light: 7w black & silver 970 $ L.B

10 Mini Signage and Applications.5mm (/") Stainless Steel available by the meter and can be cut to any length 5./900 Remov-able Picture / Panel holds pictures or /" 5./90 or Solid Panel Panel requires drilling with /" holes. Gap for panel is /", fixed 5./905 $.00 Fixing Plate 5mm ( /") diameter for fixing to ceiling, floor or wall. When fixed to wall, cables run vertically and provide a wall fixed display system 5./900 $.00 Above, a typical wall to wall application of Mini signage, with or Solid s and Removable Picture/ Panel s. To see the complete line of Mini, with all the possible signage components, turn to pages - 5. Rod Sinage and Applications Top Edge for suspending Panels from end of. Holds panels up to /" thick 5./959 $ Right, the or Solid Panel. End Stop for can be used to secure the cable to items 5. or 5.. The cable is pushed into one end of this component and secured by tightening two grub screws 5./900 $.50 Rods available in 9 /" and 9 /" lengths. The Rods link by screwing together. Required lengths are achieved by trimming off any surplus from the female end. R..0/ 90 x 000mm (9 /")L $ 7.00 R..0/ 90 x 000mm (9 /") L $ Single Panel (up to /") R./9095 $.00 N ind.co m Vertical Wall/ Panel R.D/977 7 Single Rod Wall Mounting /" dia. length /" for securing Rod parallel to wall R./ 99 $.50 Tensioner for secured to the cable by tightening two opposing grub screws onto the cable. This tensioner can be used in conjunction with Fixing Plate /9005 $ 7.00 Crossover 0mm dia. (/"). Takes (/") and (/") Rod R.B/97 $.50 Vertical Rod Panel R.C/97 $ 7.00 Above, the Top Edge holding an acrylic sign panel. 5 Double Panel (up to /") R.7/9 $.50 Wall Mount 0mm dia. (-9/") R.A/970 $.00 Wall Fixed s Poster Holder MA. 9 $ 5.00 Crossover Wall Mount with Olive Fixed R.EO/970 $ 7.50 Cross Fixing for securing two Rods at right angles to each other R./95 $ 0.50 /" 9/" Panel Holds up to /" thick panel, not suitable for glass panels R./9095 $.00 R./905 $ Wall fixed panel supports can hold a variety of sign substrates up to /". Available in a range of finishes, from stock to polished brass,, and polished stainless steel. /" /" Requires /" hole drilling in panel; holds up to /" thick panel R.5/9 $ 7.50 R.5/90 $.00 R./9090 $ 0.00 R./90.5mm $ /" /" Micro Wall Fixed s (/") dia., holds /". Panels require 9mm (/") holes. Peg section is 5mm (9/") long 5.5/9 $.00 Mini Wall Fixed s 9mm (/") dia., holds /". Panels require mm (/") holes. Peg section is 5mm (/") long 5.7/99 $ 0.00 Maxi Wall Fixed s 0mm ( /") dia. holds /". Panels require mm (/") holes. Peg section is 0mm (/")./90 $.50 9

11 Rod Cabinets Wood and Cabinet - Tall With Low Base Wood and Cabinet - Tall With High Base Cabinet stands " high x 5 /" x 5 /". Wood Soffit Box " high, Base is " high. Complete with glass shelves, lights and transformer. Components included in this cabinet are shown at right. All Cabinets are made-to-order. W 5 /" D 5 /" H " WGOO/979 Call for pricing (Made to order based on custom finish) Cabinet Soffit /" MDF with laminate WG00A/ 9 Cabinet Base /" MDF with laminate WG00B/ 95 Back, Door, and Side Set /" Tempered 9 Mounting Stud C./99 Cabinet Door Hinge C./90 qty: Hinged Cabinet Door Lock C./900 Rod and Connectors Set WG00C/ 90 qty: Single Shelf ER.C/ 90 /" Tempered Shelves 075/ 9 qty: Secondary Power Feed supplies the v current from the transformer to the lighting cables, power track and rod (black only) L./9 Cross Bar Rotating Low Voltage Light TZ.00R/ 9 qty: 00VA Capacity with Secondary Power Feeds L.00W /9 Cabinet stands " high x 5 /" x 5 /". Wood Soffit Box " high, Base is " high. Complete with glass shelves, lights and transformer. Components included in this cabinet are shown at right. All Cabinets are made-to-order. W 5 /" D 5 /" H " WGOO/900 Call for pricing (Made to order based on custom finish) Cabinet Soffit /" MDF with laminate WG00A/ 9 Cabinet Base /" MDF with laminate WG00B/ 95 Back, Door, and Side Set /" Tempered 99 Mounting Stud C./99 Cabinet Door Hinge C./90 qty: Hinged Cabinet Door Lock C./900 Rod and Connectors Set WG00C/ 909. qty: Single Shelf ER.C/ 90 /" Tempered Shelves 075/ 9 qty: Secondary Power Feed supplies the v current from the transformer to the lighting cables, power track and rod (black only) L./9 Cross Bar Rotating Low Voltage Light TZ.00R/ 9 qty: 00VA Capacity with Secondary Power Feeds L.00W /

12 -Suspended Cabinets - s on Outside Illuminated Low Showcase The cabinet is constructed from /" tempered glass. The cabinet is assembled free of the s, and, once completed, secured in position. The cabinet is held to the using allen screws, which trap the cable into the slotted components on the sides of the cabinet. Shelves are supported on d brass Rods and are powered by the transformer. Both cabinets are lockable. Components included in this cabinet are shown at right. Cabinet does not include Fixings. This Cabinet can be supported from s fixed in any combination from the wall, floor, or ceiling. All Cabinets are made-toorder. W /" D " H 7 /" CMCOO/90 Call for pricing (Made to order based on custom finish) -Suspended Cabinets - s Pass Through This cabinet is constructed from /" tempered glass using satin anodized components. The cabinet is assembled around the tensioned cables. Both cabinets come with three shelves. This cabinet does not come with lighting standard. Both cabinets are lockable. Components included in this cabinet are shown at right. Cabinet does not include Fixings. This Cabinet can be supported from s fixed in any combination from the wall, floor, or ceiling. All Cabinets are made-toorder. W 5/" D " H 7 /" CMCOO/90 Call for pricing (Made to order based on custom finish) -Plane Isolated Connector CMC00A/ 9 qty: -Plane Isolated Connector CMC00B/ 95 qty: Top, Back, Doors, Side, Bottom and Side Set /" Tempered 950 Rod Set CMC00C/ 9 Lock Plate with Double Lock / SC.D/97 -Plane Connector CMC00A/ 9 qty: -Plane Connectors CMC00A/ 95 qty: Cabinet Hinge SC./955 qty: pair Single Shelf ER.C/ 90 /" Tempered Shelves 95 qty: Top, Back, Doors, Side, Bottom and Side Set /" Tempered 95 Lock Plate with Single Lock / SC.S/97 Cross Bar Rotating Low Voltage Light TZ.00R/ 959 qty: Cabinet Hinge SC./955 qty: pair 00VA Capacity with Secondary Power Feeds L.00W /9 Power Feed Connector Set CMC00D/ 9 Shelf.7L/957.7R/95 qty: / /" Tempered Shelves 95 qty: Height inside glass top 7/". Sliding doors set in polished track, with the top track bonded to the glass top and a centrally positioned lock. The base unit is supplied with locking doors and a cabinet with shelf. Components included in this showcase are shown at right. All Cabinets are made-to-order. W 7 /" D 5/" H 9 /" WG00/90 Call for pricing (Made to order based on custom finish) Here, the -Plane Connector holds the side and the top of the above cabinet in place. Tracks carry the sliding glass doors. -Plane Connector WMG/9790 qty: -Plane Connector WMG/979 qty: Mounting Stud C./99 qty: Hinged Cabinet Door Lock C./979 Cabinet Base /" MDF with laminate 95 Top, Back, Door and Side Set Material: /" Tempered 955 Door Tracks Top Track CTT/97 Bottom Track CBT/9 Door Pull Material: C.7/9 qty: 00VA Capacity with Secondary Power Feeds L.00W /9 Pendant Disc Rotating Light T./9 05mm max height qty:

13 Materials, Colors, and Finishes Guide Terms And Conditions Stock Aluminum Finishes Clear Anodized Aluminum -0 Stock Wood Veneers* Maple Veneer -0 Cherry Veneer -0 Stock Vinyl Colors Matte White -90 Black Anodized Aluminum -09 Stock Laminates White Matte Laminate -09 Stock Acrylic Clear -500 White Gloss Laminate - Gloss White -90 Clear Frosted Both Sides -50 Black Matte Laminate -05 Walnut Veneer -09 Paintable Vinyl* -90 Silver -90 Recycled Wood Veneers Redwood -0 Matte Black -90 American Black Walnut -07 Gloss Black -905 Gloss Brown -90 Gloss Red -907 *Notes on Paint-able vinyl B&N provides the panel in Paintable Vinyl, customer to paint. Use ONLY LATEX PAINT, not Oil-based paints or solvent-based thinners, as these may damage the surface. White Frosted Both Sides -50 Stock Metal Finishes Polished Chrome -00 Black Gloss Laminate -5 Gloss White -59 Brushed Chrome -00 Maple Laminate -0 Gloss Black -59 White Matte Black Powder Powder Coat - Coat -0 Cherry Laminate - Walnut Laminate -9 Blackened Steel -55 Maple -90 Stock Fabrics Blanca -70 Silver Powder Coat - Wood Veneer Disclaimer: Please keep in mind that veneers are, in fact, real wood. As such the veneered products you specify may feature the grain variation and natural characteristics allowed in the grade and species specified. Any veneer samples provided by B+N Industries are meant only to be representative of the species selected. Actual color, grain pattern and other appearance characteristics will vary within each veneer species and grade. Chalk -70 Walnut -909 Platinum -709 Chocolate Pear -900 QUOTE BY PHONE (Outside Northern California) (Northern California) QUOTE/ORDERING BY MAIL@BNIND.COM (Ready hours a day) CUSTOMER SERVICE Customer service is available :00 am to 5:00 pm (PST) Mon. Thurs. and :00 am to :00 pm on Fri. to answer your inquiries regarding products, quotes or orders. WARRANTY We fully support the quality of our product. If there are any manufacturing defects, please contact our Customer Service Department by phone or for assistance. PRODUCT WARRANTY LIMITATIONS The Customer is purchasing the fixtures in an as-is condition, unless otherwise reported to the Company pursuant to [the inspection provision in the contract], as of the date of delivery and specifically and expressly without any warranties, representations or guarantees, either expressed or implied, except as set forth below, as to its condition, fitness for any particular purpose, merchantability, or any other warranty of any kind, nature or type whatsoever from or on behalf of the seller. The Company hereby warrants to the Customer and its successors and assigns that the product supplied to the Customer is constructed only for the use and purposes contemplated by the Customer set forth in the contract; and the Company, immediately prior to the delivery of the product had good and lawful right to sell the product, and that there is hereby conveyed to the Customer on the date of delivery, good title to the product, free and clear of all liens, claims, encumbrances and rights of others. WEBSITE / PRINTED MATERIALS The copy has been reviewed to present information as accurately as possible. If an error is found in description, or the item has been discontinued, yet not updated, B+N reserves the right to correct it at the time it was discovered. PRODUCT OFFERINGS AND MATERIAL FINISHES ARE SUBJECT TO CHANGE AT ANY TIME. ORDER SHIPMENTS ESTIMATES Orders in stock will ship via ground in - 5 days, unless another service level is requested by the customer. BACK ORDERS Unless otherwise noted, back orders will ship when they are back in stock at our facility. Your Sales Administrator will keep you advised on the status of all back orders. BLANKET ORDERS Blanket orders are subject to a unique set of Terms & Conditions defined at the time of order placement. CANCELLATION AND RETURN ITEMS. Stock items must be returned within 0 days, in re-sellable condition. Return of stock items may incur a 5% re-stocking fee. Freight charges on returns are the customer s responsibility. A return authorization is required for all returns. Items returned without the proper authorization will not be accepted. B+N assumes no liability for customer returns which arrive damaged due to shipment transportation.. Non-stock items purchased may not be returned. FREIGHT AND MULTIPLE SHIPMENTS. The following will result in additional charges unless otherwise stated on your quotation: - Shipments to multiple destinations. - Customer requesting custom packaging (includes breakout into multiple packages) and shipped to one location.. Collect or rd Party Billing shipments are the responsibility of the freight payer.. Freight quotations are subject to re-quote at the time the order is placed or if shipment is delayed.. Customer is responsible to arrange and pay for International freight, as quotes are for transportation only. Freight quotes provided by B&N do not include the broker, customs duties, fees or taxes. That is the responsibility of the customer to obtain and pay directly to the source. Broker information must be provided prior to shipping. 5. Weights and measurements may change due to changes in suppliers and/or packaging.. B&N is unable to guarantee delivery times or dates. Delivery times and dates are the responsibility of the shipping agent. 7. Regarding split shipments: On occasion, an order may ship from multiple locations based on availability. PRODUCT DISCREPANCIES AND DAMAGES VIA SHIPMENT. Customer must inspect items upon delivery for damage or discrepancy.. B+N accepts no liability for damage incurred during shipping. Any damage found at time of delivery must be noted by customer on delivery receipt and signed/ initialed by driver. Customer is to retain all packaging with damaged items for an on-site inspection by carrier.. For damage on rd party or collect shipments, the customer is responsible for filing the claim with the carrier for financial reimbursement.. If any product arrives in damaged condition, a freight claim must be filed with the delivering carrier. Retain packing material and note on the Bill of Lading DAMAGED. Our Customer Service Department will assist you with any questions regarding filing a freight claim. 5. All claims regarding shortages and freight damages must be presented WITHIN 7 DAYS of receiving the shipment. PAYMENT METHODS AND TERMS. We accept VISA, MASTERCARD, AMERICAN EXPRESS AND COMPANY CHECKS.. Payment is due in full prior to shipping of product for all PREPAID ACCOUNTS. We do not ship COD. For payments made by check or bank transfer, the order will be processed upon receipt and approval of check or receipt of funds.. Consideration for establishing terms requires a minimum order amount of $5,000.. Approved repeat customers may qualify for NET 5 day terms. A credit application must be completed with the necessary references. Please allow - weeks for processing. Once credit is approved, a 50% deposit is required on the initial order and future orders will be evaluated for deposit requirements. All custom orders will continue to require a 50% deposit. SALES TAX. Orders delivered within California and New York are taxable, unless a valid CA or NY resale card is presented prior to shipping the order.. Taxable orders paid for by the customer and stocked at our California facility are taxed at the current rate for San Mateo County.. Orders from resellers located outside California and New York that are drop-shipped to their customer within California and New York are subject to sales tax, unless we have received a valid California, or New York resale card from the purchaser or their representative. PROTOTYPES, DRAWINGS, TOOLING, AND FIXTURES. Drawings provided by B+N are the exclusive property of B+N Industries, Inc.. Prototypes made from drawings that are not detailed and approved by B+N Industries, Inc., or have been supplied via verbal instruction from the customer, are subject to the interpretation of B+N Industries, Inc.. Tooling dies and fixtures made and used exclusively for a job or customer, remain the property of B+N Industries, Inc., unless otherwise established. PHOTOGRAPHY OF COMPLETED PROJECTS B+N Industries, Inc. reserves the right to photograph a completed project that has utilized our product offerings, and retains the rights to use the photographs in advertising, on our website, public relations and all marketing materials. FORTINA SPECIFIC ORDERS WARRANTY We fully support the quality of the Fortina product for years. This warranty covers the finish adhesion of film on Louvers, Spandrels (Slats), it is not applicable to surface wear and tear from handling. CANCELLATION AND RETURN ITEMS. Fortina is considered a custom made to order line, therefore, may not be returned.. If an order is canceled which is in production the customer is liable for paying for all products ordered

14 B&N Industries Main Offices: 09 Chapin Avenue, nd Floor Burlingame, California New York Showroom and Offices: (By Appointment Only) 0 West th Street New York, New York B&N Industries, Inc.