Integrated Hinge Doors with Salice AIR Hinges Technical Manual

Transcription

1 Integrated Hinge Doors with Salice AIR Hinges Technical Manual v.9.17

2 Table of Contents Profile Options... 3 Insert Options... 5 Decorative Hardware... 7 Hinge Installation... 8 Hinge Adjustment... 9 Drilling Dimensions Overlay Calculation Cabinet Drilling Temlate Cleaning and Care Warranty v. 3.18

3 1.02 (26mm) 0.75 (19.2mm) 1.02 (26mm) AF012 Design Guidelines: - Maximum height = 84 (2100mm) - Maximum width = 24 (600mm) - Maximum door weight = 44 lbs (20 kg) - Minimum height =5.5 (139.7mm) - Minimum width = 5.5 (139.7mm) - Maximum square footage = 14 sf - NOT recommended as drawer fronts or lift up doors Anodized Aluminum Powder Coat Profile Finishes natural aluminum onyx (matte) black white oil rubbed bronze Insert Specifications: - 4mm (.156 ) - Handle hole can NOT be drilled through the frame - Handle hole locations must be specified at time of order if insert is tempered glass To Calculate Insert Size: Insert Width = Door Width (6mm) Insert Height = Door Height (6mm) Hinge Information: Profile AF012 utilizes Salice AIR door hinges. Finish options: Hinge Motion Options: - Titanium - Soft Close - Nickel - Push to Open 3 v. 3.18

4 1.02 (26mm) 0.45 (11.3mm) 0.75 (19mm) 0.75 (18.8mm) AF013 Design Guidelines: - Maximum height = 84 (2100mm) - Maximum width = 24 (600mm) - Maximum door weight = 44 lbs (20 kg) - Minimum height =5.5 (139.7mm) - Minimum width = 5.5 (139.7mm) - Maximum square footage = 14 sf - NOT recommended as drawer fronts or lift up doors Anodized Aluminum Powder Coat Profile Finishes natural aluminum onyx (matte) black white oil rubbed bronze Insert Specifications: - 4mm (.156 ) - Handle hole can be drilled through the frame - Handle hole locations must be specified at time of order if insert is tempered glass To Calculate Insert Size: Insert Width = Door Width (38.5mm) Insert Height = Door Height (38.5mm) Hinge Information: Profile AF013 utilizes Salice AIR door hinges. Finish options: Hinge Motion Options: - Titanium - Soft Close - Nickel - Push to Open 4 v. 3.18

5 Insert Options Standard Glass Inserts satin clear reeded listral D master carre low-iron satin low-iron clear smoked grey mirror glass Glass inserts are 5/32 (4mm) thick Etched and patterned side facing inside door Glass is tempered safety glass without a tempered logo, unless otherwise specified Mirror glass is not tempered, but includes safety backer Backpainted Glass Inserts white gloss white matte black gloss black matte slate gloss slate matte sand gloss sand matte olive gloss olive matte mocha gloss mocha matte scarlet gloss scarlet matte silver gloss* silver matte* bronze gloss* bronze matte* High quality water based paint on low iron glass All glass is tempered safety glass without a tempered logo unless otherwise specified 177 Non-Standard and Custom colors available All backpainted glass has a light grey backer for added durability 5 v Technical specifications subject to change *metallic

6 Insert Options High Gloss PARAPAN Inserts alpine white 5910 white 5907 opal white 5196 latte 5772 pale ivory 5525 light grey 5290 stone grey 5295 cappuccino 5773 mint 5421 kiwi 5440 turquoise 5471 cobalt blue 5380 orange 5570 bordeaux 5600 signal red 5655 oxide red 5771 brown 5776 black 5299 High gloss solid surface PARAPAN material PARAPAN inserts not available with AF006 or AF010 Inserts are 5/32 (4mm) thick UV and fade resistant Easy to clean and water resistant Complimentary clearner provided with order *Images may not be exact representations of solid surface color options. Contact Element Designs to obtain samples. Architectural Resin Inserts fossil leaf linea ivory quattro carbon thatch wisp silver Inserts are 5/32 (4mm) thick Sandstone finish on front and back Resin inserts contain organic materials and may vary in color and density due to natural conditions strand iron starcrossed struck pure swept gold swept silver shadow ensign gild gold kathali mari seamless weld silver Metallic Insers Inserts are 5/32 (4mm) thick NOT available with AF006 or AF010 aluminum brushed platinum laminate stainless ice 6 laminate acrylic v. 3.18

7 Decorative Hardware Natural Aluminum Finish Knobs K001 K005 K006 K007 K008 K009 Handles & Pulls natural aluminum finish available lengths: P1-127 Length: 7 3/8 (5 c. to c.) P1-190 Length: 9 13/16 (7 1/2 c. to c.) P1-250 Length: 12 13/16 (9 13/16 c. to c.) P1-380 Length: 17 5/16 (14 15/16 c. to c.) P1-640 Length: 27 9/16 (25 3/16 c. to c.) P1-880 Length: 37 (34 5/8 c. to c.) brushed stainless steel look finish available lengths: P1-76S Length: 5 5/16 (3 c. to c.) P1-192S P1-320S Length: 9 15/16 (7 9/16 c. to c.) Length: 15 (12 9/16 c. to c.) oil rubbed bronze finish available lengths: P1-76ORB Length: 5 5/16 (3 c. to c.) P1-192ORB P1-320ORB Length: 9 15/16 (7 9/16 c. to c.) Length: 15 (12 9/16 c. to c.) Finger Pulls P2-42 Length: 3 (2 c. to c.) available finishes: - natural aluminum finish - brushed stainless steel finish - arctic gold finish - chrome look finish - black, white, onyx & oil rubbed bronze powder coat Flush mount installation fabrication available. Contact Element Designs for details. P2-42 pulls also available in custom lengths. Contact Element Designs for details. 7 v. 3.18

8 Hinge Installation The profiles which make up the door must be cut and the ends mitred at 45, and milled for the insertion of the corner connectors. Insert the corner connectors into the profile and fix them with the screws provided. Insert the hinges into the recesses. Fix with the screws provided. 8 v. 3.18

9 Air - Adjustments Hinge Adjustment Side adjustment range +2 to -2 Depth adjustment range +2 to -0.5 Height adjustment range +1.5 to -1.5 Note: Always use a #2 Pozi screw driver for adjustments v. 3.18

10 Drilling Dimensions Top 0 D1 = 16.5 Min min Cabinet Workings on the top and the bottom panel for the application of the hinge. Door Milling scheme for aluminium-framed doors DEL6LP300_ AF012 profile (26mm width and depth) R5 K2 = D D = 20.5 Max K Y=4 D R 4 R K= Cabinet Door R Y= ± ± ± Glass thickness: 4 mm with gasket 5 mm without gasket 10 v. 3.18

11 Overlay Calculation K1 (drilling distance) = 4mm K2 = top/bottom drilling distance OVERLAY Max overlay is 20.5mm overlay with a K2 of 0mm Please contact Salice America for more detailed information regarding how to use the drilling templates and set up the overlay. NOTE: It is recommended to choose the overlay that allows the largest drilling distance (K2) for the door and panels. For drilling wood doors please contact Salice for drilling distance information v. 3.18

12 Cabinet Drilling Template A template set is available for purchase to aid in the drilling of the holes in the cabinet box for the Salice AIR hinge, and in depth directions and how to videos on a USB drive are inculded in the set. Images and descriptions of the set contents are below. A router is needed to drill the holes. (2) Short U shaped aluminum channels used as stop bars. (4) Long aluminum channel guide rails. (2) Large black templates (1R & 1L). (1) Hardware package (1) Whiteside Tool pack Whiteside 10 mm dia., spiral up-cut router bit and 3/4 dia. brass guide bushing. Hardware package which includes: (2) Allen wrenches, (8) round head machine screws & washers, (2) flat head machine screws, (8) flat channel nuts for long guide rails, (2) flat channel nuts for small aluminum stop bars and (4) ring pins. 12 v. 3.18

13 Cleaning and Care To insure proper cleaning and care of your product, please follow these simple suggestions for our materials: Glass (gloss or satin surfaces) We recommend using 99% isopropyl alcohol, citrus or vinegar based cleaners on a clean, non-abrasive cloth or paper towel. If a heavy stain is present and does not come clean using the suggestions above, use isopropyl alcohol with a Magic Eraser by gently scrubbing until the mark is removed. Backpainted Glass Follow instructions above for the gloss and/or satin surface of the glass, opposite the painted side. For the backpainted water based coating, we recommend using a mildly damp (water only) on a non-abrasive cloth to gently clean the coated side of the glass. Aluminum Extrustions Use a clean cloth with a mild detergent to clean the aluminum. NEVER use an abrasive cleaning pads such as a metallic sponge, solvents, strong detergents or other chemical agents when cleaning glass or aluminum. 13 v. 3.18

14 Warranty Element Designs aluminum frame cabinet door products are covered by a limited liability warranty from defects in material and workmanship over the functional lifetime of the doors. The warranty includes any defects in the fabricated door size, boring locations, aluminum framing flaws outside of quality standards, and glass imperfections outside of quality standards. Element Designs also warrants its doors from deterioration, discoloring, degrading, or overall changing through the course of the product s lifetime. This warranty does not apply if, in the judgment of Element Designs, the product fails due to damage from shipment, handling, storage, accident, abuse or misuse, or if it has been used or maintained in a manner not conforming to product s care instructions, has been modified in any way, or has been defaced. Repair by anyone other than Element Designs or an approved agent voids this warranty. The maximum liability of Element Designs is the product purchase price. 14 v. 3.18

15 Notes 15 v. 3.18