Routing. Routers 2007/2008. Tools for the toughest demands. Chamfering cutter. Rounding chamfer cutter. Router cutters for mineral materials
|
|
- Shana Willis
- 6 years ago
- Views:
Transcription
1 Routing Chamfering cutter Rounding chamfer cutter Router cutters for mineral materials Routers 2007/2008 Router cutters for hand rails Tools for the toughest demands
2 Routing the smart way Always one jump ahead through innovation and optimised technology Quality from start to finish. High closeness of grain. Always one step ahead. The Festool routers are high-end, state-of-the-art products; they have been developed for practical application and tested, checked and controlled under the most rigourous conditions. The cutters for polymer material, for example, leave nothing to be desired: they are the result of innovative ideas and comprehensive tests and show the way forward to new working areas and a larger customer base. Ultra modern production lines guarantee precise routing. The excellent properties of Festool s products will convince you. Top quality really begins with the cutter material. Festool uses tungsten-carbide alloys for its cutters that impress with their superbly high micro-grain quality and closeness. Tungsten-carbide powder and a cobalt binding agent are bonded by extreme heat and pressure. In contrast to a coarse grain structure, the dense material has a long service life and good cutting quality. Quality begins with the selection of high-quality raw materials. First-class steel and highly wearresistant carbide tips. Induction brazing ensures permanent joint soldering and a long service life. No matter which routing method you require for your application, the grinding centre with CNC-control produces extremely sharp cutters. Comparisons reveal the difference. Heterogeneous surface with a coarse surface structure. Homogeneous surface in Festool s micro-grain quality. Continuous production monitoring and control ensure that the quality remains constant. 2
3 Groove cutter, stepped cutter p. 4 5 All the dimensions S at a glance: To achieve an optimum 100% cutting result, the cutter should be clamped directly below the spindle head, but at least up to the marking on the drive shaft. V GL Rounding, chamfering, p. 6 7 hollow routing GL : Total length NL: Working length, D : Diameter s : Shaft V : Marking for minimum clamping depth D NL Water-channel routing, p. 8 9 flush routing and rebating : n max. = maximum router speed R : Radius in mm F ( ): Chamfering angle in For your safety. Cutter materials. VS 600, handle, mitre tongue p and groove, scrip, V-grooves and plasterboard V-groove cutters With Festool you are always on the safe side: only the routers conforming with the EU guidelines for woodworking machines bear the MAN mark after successful testing. As a tested power tool for manual guiding they have the following features: mainly circular form backlash-free with a limited routing depth of max. 1.1 mm limited chip-clearance width S cutting speed on the cutting shaft. Festool test mark BG TEST cutters (formerly HM cutters) also withstand tremendous loads when cutting hardwood, laminated materials and plastics. cutters are available in different designs: solid carbidemetal cutters, tipped cutters and tools with reversible carbide tips. HS The cutter material HS (formerly HSS) is particularly suitable for soft materials. HS cutters are available as straight or spiral-shaped. Circle router, laminate cutter, p Dowel borer, profiling cutter Counterprofiling cutter, tapering p cutter, profiling cutter for carpentry Router OFK 500, Router OFK 700 p Aluminium cutter p. 17 What counts in practice is the result. Flawless surfaces and perfect profiles. A clean cutting result avoids timeconsuming finishing work. Optimum cutting geometry and correct grinding ensure a perfect surface finish. Special cutters p for mineral materials Cutting result with burnt edging Clean cutting edge Routing templates p Overview p
4 Groove cutter Top performance all along the line. Solid carbide groove cutter with standard bit No compromises. This solid carbide cutter is a heavy-duty tool. It even withstands the toughest demands especially where cutters of small diameter would easily break. The ground carbide-metal standard bit also has a longer service life if used for drilling board-type material. Groove cutter with base blade * * for slot jointing using Festool VS 600, with fine-precision in diameter For good reason. If you wish to achieve optimum cutting results with ease for drilling, grooving, rebating and long-hole routing, you are best advised to use the groove cutter. The router is fitted with a soldered-in cutter. It runs precisely, makes drilling easier and has a long service life. Drill bit used after 60 drillings in a kitchen tabletop (30 mm depth): Bit shows slight signs of wear Worn bit after 60 drillings in a kitchen tabletop (30 mm depth): Blunt bit
5 HS Groove cutter Multi-talents. The HS spiral groove cutter and the solid carbide-metal spiral groove cutter. With fast feed for grooving, rebating, long-hole cutting, drilling and copy routing. They operate quickly, powerfully and extremely cleanly and are pleasantly quiet. The chips are drawn upwards through the spiral cutter and sucked off from there. The routed groove remains permanently clean * * * * * for slot jointing using Festool VS 600, with fine-precision in diameter Spiral groove cutter Effeciency speaks for itself. The reversible carbide tip router has the following excellent properties: the reversible tips ensure constant routing dimension and precision no re-sharpening, low downtimes faster change of cutter ensuring sharp routing tools at all times extremely economical because the reversible carbide tip can be turned Spare tip 8 20 x Set incl. 4 pce x x x Rough cutter x ,6x Main plate x x Groove cutters with reversible carbide tips Stepped cutters D1 D2 T1 NL F Part No Two ideal partners. With the stepped cutter and the Festool routing aid, the faces of espagnolettes can be routed without tilting and wobbling in the rebate, quickly and exactly. 5
6 Rounding, chamfering and hollow routing Perfection demands skill technology for better shaping. Ovolo edge-cutter dia. D ANL BGL R F q Part No Ovolo edge-cutter with ground standard bit. For decorative fronts using imitation panelling. Using the ground standard bit it is possible to plunge-cut into the centre front of the furniture and cut imitation panelling. Ogee cutter with 2 ball bearings * * * * * * * * One power tool double benefits. with ball bearing dia mm for rounding with ball bearing dia. 9.5 mm for ovolo edge cutters Half-round cutter with ball bearing Spare ball bearing dia dia * With ball bearing dia mm and ball bearing dia. 9.5 mm included in delivery Spare ball bearing dia For the complete job. For decorative board edging the halfround cutter does a grand job. It has a routing height of 30 mm to suit laminated wood of the same thickness. Its ball bearing guide guides the router directly along the template and ensures that curved parts can also be profiled. Chamfering/edge router with reversible carbide tips and ball bearings Spare ball bearing dia Spare tip 12 x Set incl. 4 pce. Precisely calculated. The edge router with reversible carbide tips is the ideal power tool if you attach importance to long service life, particularly high economic efficiency and constant precision. By purchasing one reversible carbide tip you receive four router bit service lives. You thus save on follow-up costs because the cutter can be reversed. 6
7 An unbeatable team. Chamfer cutter with ball bearing With these shaft cutters, you can also produce this familiar edge shape commonly found in industry with a manual router. Here the chamfer cutter and rounding chamfer cutter with conical ball bearing work together perfectly Spare ball bearing dia Spare ball bearing dia dia. D ANL BGL R F q Part No Rounding chamfer router with ball bearing Spare ball bearing Set incl. 2 pce Hollow router , , Hollowing router with ball bearing Spare ball bearing dia
8 Water-channel routing, flush trimming and rebating The right tool for every job. Water channel router with ball bearing Spare ball bearing dia Particularly suitable for water-channel routing. Curved or round water channels can be cut without any problem with this router 1:1 using a quickly made template. Water channel router Flush trimming router with ball bearing Through thick and thin Spare ball bearing dia Spare ball bearing dia D 12.7 = upper ball bearing D 19 = lower ball bearing Thanks to its large ball bearing guide the template router is the ideal power tool for simple 1:1 copy routing. Edge routers with reversible carbide tips and ball bearings Spare ball bearing dia Spare tip 20 x Set incl. 4 pce. Precision also after sharpening. When sharpening blunt cutters on conventional routers the diameter aligned to the ball bearing is normally reduced. This causes a ridge to form when edges are trimmed flush after sharpening. Using the Duro Form flush-trimming cutter with ball bearing guide, the precision remains permanent. 8
9 One power tool, three applications. Flush trimming of projecting coating at a right angle, or with a 45 chamfer or even both in one working process. With this router for flush-trimming and chamferedging you can always produce clean connecting edges. The plastic-coated ball bearing does not leave any marks and protects the edge of the workpiece / Spare ball bearing dia Router for flush-trimming and chamfer edging, with ball bearing flush chamfer flush + chamfer Drill router Plunge route finished. D NL B R F Part No Without any rough-drilling the drill router plunges directly into the coating layer. By guiding it along the side face the pre-made contour is trimmed flush. Amazingly versatile. When it comes to rebating, the rebating cutter with reversible carbide tips is amazingly versatile: 5 different rebating depths with only one basic element (by changing the ball bearing). Rebating depths for rebating cutter (with ball bearing) Rebating depth (mm) Ball bearing dia.(mm) Spare tip 12 x Spare ball bearing set x dia. 9.5 / 1x dia / 1x dia. 16 / 1x dia. 19 / 1x dia. 22 Rebating cutter set with reversible carbide tips and ball bearings Rebating depths for rebating cutter (with ball bearing) Rebating depth (mm) Ball bearing dia. (mm) Spare ball bearing dia Auxiliary ball bearing set x dia. 9.5 / 1x dia / 1x dia. 16 / 1x dia. 19 / 1x dia. 22 Rebating cutter with ball bearing dia mm 9
10 Router for carcass joints, grips, bonding, script, V-grooves These specialists fulfil your every need. Carcass joint router with slit HS Good jointing. Perhaps the most interesting application possibility for the carcass joint router is dovetail jointing. Using the system of optimally matching router, template and cutting tools, it is possible to produce the traditional open and secret dovetailing in next to no time. Carcass joint router ) ) HS ) ) HS Grip-hollowing router with ball bearing ) ) Spare ball bearing dia ) for dovetail keys using Festool VS 600 2) for open dovetail keys using Festool VS 600 Concealed grip. Wherever visible fittings would spoil the overall appearance of a workpiece, the concealed grip is an elegant alternative. The designer has an additional possibility to choose from. Grip-edge router /
11 and gypsum plasterboard Bonding router n max. 22, Route part on edge Route part flat Bonding router 3. Turn flat routed part 180 and join Higher stability. Script router With the tongue and groove cutters, surfaces or mitres can be glued reliably and without lateral slipping. The toothing of the workpieces ensures high stability HS V-groove cutter HS Routing and jointing instead of gluing and smoothing. Impressive ideas: in addition to the 45 router for gypsum plasterboard there is now also a 22.5 router. Now it is also possible to join 45 corners with very little effort Gypsum-plasterboard router 11
12 Disk-grooving, laminate cutter, hinge and dowel drill, profiling Always the optimum solution. Disk-grooving cutter For sealed doors. B d R F 8 mm Shaft * * * * * * * * * without cutter spindle The cutter spindle and ball bearing D 28 and the disk-grooving cutter with a width of 4 mm are ideal for routing door seals in door frames. Cutter spindle D B d R F Part No Cutter spindle with ball bearing See right for picture D B d R F Part No Spare ball bearing dia Spare ball bearing dia Laminate cutting set D B T R F Part No Spare ball bearing dia Spare grooving disk Hinge routers 8 s mm = 8 Shaft mm Accurate dimensioning with System 32. The LR 32 holes series system makes routing a row of holes for shelves and false floors amazingly simple. The holes for hinge fittings are also cut accurately in-between in the System 32 grid. Dowel drill Through-hole drill * Through-hole drill * without centring point 12
13 cutter Excellent for special tasks. T-groove cutter For cutting T-grooves and picture slits (key holes) in solid wood and laminated materials. D1 D2 NL1 NL2 F Part No Your friend and helper. For profiling workpieces on all four sides the multifunction table MFT is an indispensable helper. The workpiece is clamped securely and the router is guided perfectly using the guide rail. The support prevents tilting and you obtain a perfect cutting result. D NL GL R1/R2 F Part No / / Spare ball bearing dia Double-radius cutter with ball bearing For the ambitious. D NL GL R1/R2 F Part No / Spare ball bearing dia Multiprofile cutter with ball bearing Using the profiling cutter and the matching template you can cut impressive panelling or bays. Profiling cutter D NL GL R1/R2 F Part No / Profiling cutter D NL GL R1/R2 F Part No /
14 Counterprofiling, tapering, profiling cutter for carpentry We shape your ideas into optimum solutions. Profiling cutter radius with ball bearing Spare ball bearing dia Simple and exact. It could not be easier. For rounding furniture fronts, tabletops, benches or chairs, this profiling cutter with its longdrawn radius is the ideal power tool. Curved and round parts can also be rounded-off at ease with this tool. Counterprofiling cutter tongue with ball bearing D NL B R F Part No Spare ball bearing dia Framed doors with counterprofile and panelling. For these demanding applications, Festool offers exactly aligned tool sets. Adjusting the cutting rings is simple, thanks to the ball bearing guide. No matter whether you wish to produce the traditional profiles or simply plain, modern forms with these tools you will succeed in creating impressive results. Counterprofiling cutter groove with ball bearing D NL B R F Part No Spare ball bearing dia Profile tongue cutter D NL B R F Part No D NL B R F Part No Profile tongue cutter D NL B R F Part No D NL B R F Part No Classic furniture fronts. Using these tool sets you can cut classic framed doors in differing styles. With the double-cutting carbide tools you can obtain a gentle, clean cut. 14
15 Tapering cutter with ball bearing D NL GL R F Part No n max. 22,000 The tapering cutter with ball bearings is perfectly suited to cutting classic curved panelling. Tapering cutter without ball bearings D NL GL R F Part No n max. 22,000 On the other hand, with the tapering cutter without ball bearings, deeper tapers can be cut. Tapering cutter with ball bearing * Spare ball bearing set Set incl. 1 pce. Tapering and counterprofiling all in one. * without ball bearing Profiling cutter radius with ball bearing Using this power tool you can cut the panelling and the frame. Complete fronts can be produced when combined with a disk-grooving cutter Spare ball bearing set dia 12, n max. 22,000 Profiling cutter The Basis 6 A and router OF 2000 E are perfect for cutting workpieces with larger diameters and will always provide a secure support surface for routing. D NL GL R1 R2 Part No , Spare ball bearing dia n max. 22,000 15
16 Routers for edge trimming OFK 700 and OFK 500 Edge trimming cutter D NL B R F Part No Edge trim. cutters with reversible carbide D NL B R F Part No Spare tip 12 x Set incl. 4 pce. Round parts are no problem. Whether café tables, counters, desktops or other furniture items. The Festool Edge Router OFK 700 deals with all roundings. Chamfering cutter Chamfer cutter with reversible carbide tip D NL B R F Part No Rounding chamfer cutter Spare tip 12 x D NL B R F Part No For surface and grooving laminate edges, see the cutters on page 12. This application requires the cutter spindle Order No Rounding edge trimming cutter with ball bearings D NL B R F Part No Spare ball bearing dia Router base 0 Order No For accurate angle routing.
17 OFK 500 Rounding chamfer cutter D NL B R F Part No. 8 mm Shaft Spare ball bearing with clamping screw For rounding off plastic or wooden edge band. OFK 500 Chamfering cutter D NL T R F Part No Spare ball bearing with clamping screw For chamfering plastic or wooden edge band. 8 mm OFK Shaft 500 D NL B R F Part No Flush trimming router without ball bearing Spare ball bearing with clamping screw Flush trimming router with ball bearing 8 mm OFK Shaft 500 Flush trimming plastic or wooden edge band. D NL B R F Part No Aluminium cutter HS spiral groove cutter for cutting waterdraining grooves in aluminium profiles. HS Aluminium cutter Routing aluminium composite boards. V-groove cutter
18 Special cutter for mineral materials Economic processing of modern materials. Groove cutterwith reversible carbide tip s=12 mm 1/2" Part No Reversible carbide tips 50 x Set incl. 4 pce. Only the best. Solid TC spiral groove cutters s=10 mm 9.53mm Part No /2" Part No The solid carbide tip spiral groove cutters are produced from cylindrical carbide rods specially developed for processing mineral materials. The cutters are characterised by their high security and against fracture and rapid and neat work. Solid TC spiral groove cutters Roughing and finishing 1/2" Part No For fast work. These roughing and finishing cutters with chip breakers were developed for fast routing of cutouts, eg basins. A specially developed solid TC rod was also used for the production of these cutters. Edge routers with reversible carbide tips and ball bearings 1/2" Part No Spare ball bearing dia Reversible carbide tips 30 x Set incl. 4 pce. Exact and durable. 18 Mineral materials are very demanding on the cutter. When working with the ball bearing guide, it is also absolutely vital that the cutter and ball bearing permanently agree. For this reason, power tools with reversible carbide tips pay their way here within a very short time.
19 Two tools in one. Cutting inlays flush or transitions to installed basins at an 11 inclination: both are possible by changing the ball bearing supplied in the scope of delivery. 1/2" Part No Spare ball bearing dia Set incl. 1 pce. Edge trimming cutter with ball bearing, top Chamfer cutter with cutting edge. When cutting with this tool, the router is guided on the template with a copying ring. Advantage: the cutting edge allows the cutter to plunge to full depth and finish the basin cutout in a single operation. 1/2" Part No (11 ) Spare ball bearing* dia Set incl. 1 pce. Spare ball bearing* dia. 22/ Set incl. 1 pce. *Both spare ball bearings in the scope of delivery Edge trimming cutter and transition cutter with ball bearings 1/2" Part No Chamfer cutter with cutting edge Chamfer cutter with ball bearing When cutting with this tool, the router is guided on the template by a ball bearing. Advantage: the tool can be used in any router without the need of a copying ring. 1/2" Part No Spare ball bearing dia Set incl. 1 pce. Chamfer cutter with ball bearing, top 19
20 Special cutter for mineral materials Economic processing of modern materials. Chamfer cutter with ball bearing s=12 mm 1/2" Part No Spare ball bearing dia. 20/ Set incl. 1 pce. The perfect duo for modern counters. Chamfer cutter undercut: the first step with this tool is to cut a chamfer. Advantage: the counter does not have to be turned. The rounding chamfer cutter is then used to connect the chamfer with a radius. This produces a modern counter. Chamfer cutter undercut with ball bearing s=12 mm 1/2" Part No Spare ball bearing dia n max. 16,000 The system was designed for 2 or 3 rebated boards with a thickness of 12.7 mm. Simple but ingenious. Rounding chamfer router with ball bearing s=12 mm 1/2" Part No Spare ball bearing dia Set incl. 1 pce. Ball bearing with axial displacement Basin cutter with ball bearing 20 s=12 mm 1/2" Part No Spare ball bearing dia Set incl. 1 pce. Spare ball bearing dia Set incl. 1 pce. Spare ball bearing dia Set incl. 1 pce. n max. 22,000 If the cutter blade does not match the ball bearing exactly after sharpening, the transition to the cutter blade can be readjusted by shifting the axial ball bearing. This gives Festool basin cutters a long service life. Our cutter After sharpening offset in relation to ball bearing After readjustment
21 A full range. Ogee cutter with radius 3 mm to 25.4 mm. This wide range allows you to meet many customer requests. 1/2" Part No , , , Spare ball bearing dia Set incl. 1 pce. n max. 22,000 Edge-rounding router with ball bearing The result of perfected profile machining: a mineral stone wash basin in modern design. To suit any task. 1/2" Part No Spare ball bearing dia n max. 18,000 Chamfer cutter undercut with ball bearing Using the facing cutter, jutting edges can be trimmed flush without any problem, eg of strip inserts. 1/2" D NL GL R Z Part No. Part No , Facing cutter Nothing goes astray. Impossible with laminated chip boards: With the splash-wall cutter, simply cut an elevation on the worktop and the liquid stays where it belongs. These are real benefits of mineral materials which you should exploit. 1/2" D NL GL R Z Part No. Part No Spare ball bearing dia Splash-wall cutter with ball bearing 21
22 Multi-routing template MFS 400 / MFS 700 Product benefits at a glance Outstanding results Its versatility and setting options allow you to produce a large number of rectangles and circles. Optimised adaptation to the respective work situation is possible by means of corresponding extension profiles. The dimensions of the desired cutout are quickly set on the millimetre scale. Simple alignment of the template to the workpiece through attachable angle stops. Safety Safe guidance of the router with the tilt protection, even with large surface cuts. Optimised securing of the template on the workpiece with the integrated securing groove. System benefits The application versatility of the MFS 400 and MFS 700 makes them multi-talents: by sliding the profiles in longitudinal or transverse direction, the required cutout size is set simply and quickly. The tedious production of, or searching for, suitable templates is now a thing of the past. If a large cutout is required, the extension of the basic model is childs play. A wide variety of cutout sizes and radii can be cut with extension profiles ranging from 200 mm to 2000 mm. The tried and tested Festool one-hand lever clamp or G-clamp can be used to secure the templates. They are simply inserted in the securing groove in the profile and clamped. 22
23 Handling Apart from the production of rectangular cutouts, the multi-routing template is ideal for cutting circles. The circle cutter insert is inserted in the inside grooves of the template and the profiles are pushed together to the stop. A simple hole in the centre point of the circle on the workpiece is used for inserting the centering mandrel. By sliding the circle cutter insert on the scale, the radius can be set exactly. Cutting a circle couldn t be easier. Further extension profiles allow you to cut string-boards. The tread length is indicated by the template according to the steps. Then slide the angle stops into the guide slots and align. The string-board is processed through simple parallel shifting of the template. 23
24 Router carriage and worktop routing template Small assistant for perfect work. Router carriage Worktop routing template APS 900 Flat cuts can be made simply and neatly with the MFS-FS router carriage. Set the multi-routing template to the desired dimension and secure to the workpiece with screw-on lever clamps. The router carriage is pushed on and secured. The router can now produce full-surface cuts quickly and accurately, eg for hollows in kitchen worktops. With the worktop routing template APS 900, corner and panel connections can be produced for worktops. The APS is designed as standard for board depths of 600 mm. By sliding the template on the profile, worktops with a depth of up to 900 mm can be cut. The APS 900 is braced with the workpiece by lever or screw clamps via the securing groove. The templates for the board connectors can be moved freely on the profile. An ideal template for precise fitting of fixtures. Securing groove for Festool screw and lever clamps 24 Template for common board connectors 65 /150 mm
25 Accessories Description and scope of delivery Order No. Multi-routing template Routing template for rectangular (max. 300 x 100 mm) or round (max. dia. 600 mm) cut-outs. OF 1400, OF 2000, 2 angle stops, tilt protection, circle routing insert, assembly tools MFS Multi-routing template Routing template for rectangular (max. 300 x 100 mm) or round (max. dia mm) cut-outs. For OF 1010, OF 1400, OF 2000, 2 angle stops, tilt protection, circle routing insert, assembly tools MFS Worktop routing template for corner and board connectors. Up to a board width of 900 mm; (for copying ring 30 mm dia.) Worktop routing template, 3 stop pins, 2 panel connector templates, profiled rail APS Router carriage For cutting large-surface recesses, (for copying ring 30 mm dia.), scope of delivery without multi-routing template. MFS-FS Extension profiles For extending the MFS 400 or MFS 700 Length 200 mm Length 400 mm Length 700 mm Length 1,000 mm Length 2,000 mm without scale MFS-VP MFS-VP MFS-VP MFS-VP MFS-VP
26 System accessories for routers and edge routers Festool offers a complete range for your routing work. A comprehensive range of router cutters, a well rounded-off router and edge router programme and a large variety of system accessories. The best prerequisites for versatile and professional work. For OF 1010, 1400, 2000 For OF 1010 For OF 1010, 1400, 2000 The routing aid OF-FH guides the router safely at the edge. Rows of holes are drilled with the router in a 32 mm grid simply and quickly. Stationary operation in the Basis Plus. This allows you to safely cut small or unmanageable workpieces. Router OF 1010 Router OF 1400 Router OF 2000 For OF 1010, 1400, 2000 and OFK 500, 700 For OF 1010, 1400, 2000 For OF 1010, 1400, 2000 The mobile boom arm CT ASA guides the extractor hose from above. This means it does not interfere with your work. The tried and tested mobile dust extractor and the CT ASA are an ideal combination for the workshop. Efficient extraction system for all Festool routers. For example, with the chip catcher. The production of suitable templates is a thing of the past because the multi-routing template allows you to quickly set the desired cutout size. 26
27 Obtain further information from your Festool Partner Dealer, the Festool catalogue or under For OF 1010, 1400 For OF 1010, 1400, 2000 For OF 1010, 1400 Who has never come across this problem: a hole in the base plate is too large and causes the router to tilt at the edge. The additional base runner TP-OF with a small hole diameter guarantees stability at the edge. Template routing with copying rings. For all Festool routers in a very wide variety of dimensions for versatile applications. Dovetail joints, slot joints and dowelling joints are cut professionally with the VS 600. Edge router OFK 500 Edge router OFK 700 For OF 1010, 1400, 2000 For OF 1010, 1400, 2000 For OF 1010, 1400, 2000 Corner joints for kitchen worktops are cut quickly and reliably with this template. The router carriage facilitates full-surface recessing eg of leather and granite inserts. Guide rail system FS also for the Festool routers. It can be used to cut exact grooves or dovetail strips in the surface. 27
28 TTS Tooltechnic Systems GB Ltd Saxham Business Park Saxham Bury St Edmunds Suffolk, IP28 6RX GREAT BRITAIN Phone: +44 (0) Fax: +44 (0) N Art Dealer address field for address stickers Subject to alterations and errors. All illustrations are non-binding. Compiled for TTS Tooltechnic Systems AG & Co. KG, D-Wendlingen, 9/2007
Routing. Seen at Ideal Tools. Routers 2004/2005. No compromises! Chamfering cutter. Rounding chamfer cutter. NEW: Router cutters for mineral materials
Routing Chamfering cutter Rounding chamfer cutter : Router cutters for mineral materials Routers 2004/2005 : Router cutters for hand rails No compromises! Routing the smart way Always one jump ahead through
More informationTools for the toughest demands. Overview of router bits. A handy guide
Tools for the toughest demands Overview of router bits A handy guide Festool router bit selection This guide provides information on the extensive selection of Festool router bits. You will find bits for
More informationTools for the toughest demands. Special accessories for routing. A handy guide
Tools for the toughest demands Special accessories for routing A handy guide The Festool router system This part of the router booklet provides information on Festool accessories for routers and edge routers.
More informationOver Edges, Curves and Surfaces. The Festool Router Systems.
Over Edges, Curves and Surfaces. The Festool Router Systems. Tools for the toughest demands Because routers must fulfil many different requirements. The next few pages deal with edges, forms, surfaces
More informationAt last a system that joins everything.
Unique! At last a system that joins everything. More versatile, more stable, faster: the new DOMINO jointing system. No Compromises! The DOMINO jointing system. Every system has its advantages... Round
More informationDesigning and profiling furniture front sections
No. 228 Designing and profiling furniture front sections A Description Apart from classic door construction which can be carried out quickly and easily with facing and counterprofile cutters, it is also
More informationJOINTING. Product range
JOINTING Product range Every wood joint has its advantages. The DOMINO jointing system combines them all. In fact, there are so many innovations that have been developed based on a spontaneous idea. The
More informationAt last a system that joins everything.
Unique! At last a system that joins everything. More versatile, more stable, faster: the new DOMINO jointing system. No Compromises! The DOMINO jointing system. Every system has its advantages... Round
More informationDowelling joints with VS 600
No. 112 Dowelling joints with VS 600 A Description Dowelling joints with round dowels (in addition to flat dowels) are part of the standard wood joints in furniture manufacture. This joint is very stable.
More informationSemi-concealed dovetail joints
No. 100 Semi-concealed dovetail joints A Description The semi-concealed dovetail joint is a classic solid wood corner joint. It is suitable for joining wider slats, boards and solid wood panels. Semi-concealed
More informationEdging. Overview of products and applications. Accessories and consumable materials The Festool system.
250 Overview of products and applications 252 CONTURO edge bander CONTURO KA 65, KP 65/2 Semi-stationary edge banding AP-KA 65, MFT/3 CONTURO 254 256 Accessories and consumable materials The Festool system
More informationInstructions for use: 650mm, 700mm & 1000mm Versions.
Instructions for use: 650mm, 700mm & 1000mm Versions. These New Compact Multifunction jigs offer all the cuts & facilities as the larger traditional worktop jigs. The compact design make them very light
More informationRouting Dibond composite panels
No. 545 Routing Dibond composite panels A Description Aluminium composite panels such as Dibond are used both indoors and outdoors. Thanks to the heavy-duty structured coating, the material is ideal for
More informationSpokane Hardware Supply, Inc.
Decorative Hardware Hinges Router Bits Cabinet Organizers Furniture Components STRAIGHT BITS, CARBIDE TIPPED - SINGLE, PLUNGE CUT Optimum chip clearance. Specially designed tip for fast plunge cutting.
More informationCHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
More informationHinge Mortising Jig. One of the make it or break it parts of building a. 6 ShopNotes No. 74
Hinge Mortising Jig A Mortise for a Hinge. Quick, clean, and accurate that s the only way to describe the mortise you get with a trim router and this hinge mortising jig. One of the make it or break it
More informationROUTER BITS. Tooling Group Straight Bits. Insert Roundover Bits 2-7. Spiral Solid Carbide Bits. Insert Rabbeting Bits 2-8
ROUTER BITS Tooling Group 2 Straight Bits 2-2 Insert Roundover Bits 2-7 Spiral Solid Carbide Bits 2-3 Insert Rabbeting Bits 2-8 Insert Straigh Bits 1 flute 2-4 Dovetail Bits 2-9 Insert Plunging Straight
More informationfor all big jobs. Always the right tool More information. UB9 5HJ Middlesex Uxbridge Denham Broadwater Park Robert Bosch Ltd
Robert Bosch Ltd Broadwater Park Denham Uxbridge Middlesex UB9 5HJ 1619GB5S17 UK Printed in Federal Republic of Germany Subject to technical alterations. No liability is accepted for printing errors. More
More informationFLUSH-MOUNTED CIRCULAR SAWS
NO TEARS NO EFFORT. The basic principle is pulling instead of pushing. Those who have had to cut long, unhandy or particularly hard workpieces, know that pulling is easier and cleaner than pushing. Considerably
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationAluminium extruded side rails perfectly align with the saw blade.
Triton TWX7 Workcentre A versatile woodworking station that can be fitted with both a router module and a saw table module without additional adjustments TWX7 Workcentre Triton is a brand that is well-known
More informationPLANING, FINGER JOINTING
6 POWERLOCK, PLANING, FINGER JOINTING PowerLock 188 Planing cutterheads 199 Planing mill cutters 212 Finger jointing cutters 216 Hydro-programme 219 6 Tool system PowerLock for planing- and moulding machines
More informationRouting Alucobond composite panels
No. 546 Routing Alucobond composite panels A Description Alucobond composite panels can be shaped with an extremely easy processing technique. The process, the routing and folding technique, makes it possible
More informationTwin-column guide for extra stability. The sliding compound mitre saws KAPEX KS 88 and KS 120
Twin-column guide for extra stability. The sliding compound mitre saws KAPEX KS 88 and KS 120 Tools for the toughest demands Double the precision : KAPEX KS 88 KS 120. The KAPEX KS 88 and the KS 120 are
More informationPanel butt joint with the DOMINO
No. 543 Panel butt joint with the DOMINO A Description The DOMINO wood jointing system can be used easily and quickly to create frame and rack joints frequently required by joiners and carpenters. The
More informationCONTRIGA Modular, multifunctional, maximum perform ance Data to enthuse over The CONTRIGA series is a future-oriented milestone for edgebanders. It ha
UNO 1302/1303/1304 SPRINT 1310/1312/131 5 / 131 7 /1320/1321 CONTRIGA CONTRIGA Superior technology outstanding design Edgebanders Your partner for productivity and precision Spezialmaschinen CONTRIGA Modular,
More informationTimber construction. Overview of products and applications. Carpentry portable circular saw HK 132
332 Overview of products and applications 334 Sword saws SSU 200, IS 330 Carpentry portable circular saw HK 132 Hand-held planer PL 205, PL 245 Chain mortiser CM 150 335 337 338 339 Accessories and consumable
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationTen Essential. These bits will conquer the majority of woodworking tasks. b y G a r y R o g o w s k i. Operating: handheld vs.
Ten Essential Router Bits These bits will conquer the majority of woodworking tasks b y G a r y R o g o w s k i You ve bought a new router, unpacked it, and even found the switch on it. But that s only
More informationUser Manual. CMT650 Kitchen Worktop Jig CMT Part no:
User Manual CMT650 Kitchen Worktop Jig www.cmtuk.com Part no:200650 www.axminster.co.uk CMT650 Index of Contents... Page No. Index of Contents...02 What s in the Box.........03 What else you will need...
More informationExcellence in in solid wood. joinery für Abbundanlagen.
Excellence in in solid wood OERTLI quality Qualität for für your Ihren success Erfolg High-performance Hochleistungs-Werkzeuge tools for joinery für Abbundanlagen. machines Faster Cheaper Cleaner The most
More informationHICKORY SAW & TOOL, INC.
HICKORY SAW & TOOL, INC. 406 9 th Street S.E., Hickory, N.C. 28602 P.O. Box 2407, Hickory, N.C. 28603 Telephone: (828) 324-5585 1-800-762-9899 Fax: (828) 324-5588 1-800-762-6845 www.hickorysawandtool.com
More informationThe Leitz power package for window and door production on CNC controlled machines. RipTec ripple technology. HSC technology
The Leitz power package for window and door production on CNC controlled machines RipTec ripple technology HSC technology Combined window tool systems Light metal alloy tools, coated drills and router
More informationOptions book Planers
Options book Planers www.martin.info Alongside the basic equipment MARTIN planers have numerous, useful and also patented options, which perfect your workpiece and add value to your machine. Easily configure
More informationSTAMPING TECHNOLOGY - CLAMPING RAW PARTS
simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis
More informationChapter 24 Machining Processes Used to Produce Various Shapes.
Chapter 24 Machining Processes Used to Produce Various Shapes. 24.1 Introduction In addition to parts with various external or internal round profiles, machining operations can produce many other parts
More informationWorking with Wood and Wood Materials
Working with Wood and Wood Materials Excerpt from the Bosch Encyclopedia of Power Tools. Written & Published by ROBERT BOSCH GmbH and Robert Bosch Tool Corporation. The grain direction of the fibers determines
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationThe perfect connection. The DOMINO system user manual.
The perfect connection. The DOMINO system user manual. Two men. One napkin. And the origin of a brilliant idea: the DOMINO connecting system. There are now numerous draft designs, CAD drawings, parts lists
More informationSlot Cutters. Slot Cutter Arbors. without arbor 822 CARBIDE TIPPED. the only ORANGE one. pag /1/99 1:22 PM Page 28
pag 28-47 4/1/99 1:22 PM Page 28 Slot Cutters without arbor 822 CARBE TPPE These three wing carbide tipped CMT Slot Cutters feature anti-kickback three wing blade design and CMT trademark orange Teflon
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationRack joints with DOMINO
No. 541 Rack joints with DOMINO A Description The DOMINO wood jointing system can be used easily and quickly to create rack joints frequently required by joiners and carpenters. The DOMINO combines the
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationPBA. CNC panel processing center. Innovation in timber engineering. Complete processing of Glulam structures, solid wood panels and SIPS and CLT
Innovation in timber engineering CNC panel processing center PBA Complete processing of Glulam structures, solid wood panels and SIPS and CLT www.hundegger.com 2 Parts up to 8 meters wide, of any length
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationCALL TOLL FREE TO ORDER 1 (800) D B. A. Overall Diameter. Price 84600M. 15/64" 3/4" 1/4" 2" 1/4" plywood $21.24
LL TOLL R TO ORR 1 (800) 288-7483 253 OSH Straight/Mortising Router its Solid arbide ouble-lute Straight its Micrograin bits provide exceptional smoothness of cut and balanced cutting with minimal vibration.
More informationCHX 840 and CHX 1300 CIRCULAR SAW. Versatile sharpening machine for TCT circular saw blades up to 840 or 1300 mm in diameter
CHX 840 and CHX 1300 CIRCULAR SAW Versatile sharpening machine for TCT circular saw blades up to 840 or 1300 mm in diameter CIRCULAR SAW TOOTH FACE AND TOOTH TOP FOR WHEN YOU REQUIRE THAT LITTLE BIT MORE.
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE STEEL LINE
PLUS 30 for cable carriers Support trays page 304 PLUS Guide channels page 305 RCC Rail Cable Carrier page 309 ECC Emergency Cable Carrier page 30 Strain relief devices page 3 Assembly profile bars page
More informationMobile Weapons Storage System Specifications
Mobile Weapons Storage System Specifications Whatever your weapon storage needs, Hi-Density s customized Weapons Storage System will be designed to fit your unique specifications. We recognize that security
More informationPBA. CNC panel processing center. Innovation in timber engineering. Complete processing of Glulam structures, solid wood panels and SIPS and CLT
Innovation in timber engineering CNC panel processing center PBA Complete processing of Glulam structures, solid wood panels and SIPS and CLT www.hundegger.com 2 3 Parts up to 8 meters wide, of any length
More informationClassic C3. Lamello System. Advantages and features. Joining. Technical data. Kit contains
Classic C3 Lamello System The original biscuit joiner that is affordable for every workshop. Choose Lamello for precision, reliability, longevity and many other benefits. Long-life precision guidance CNC
More informationHOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use
Mitre saws with pull function HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Features soft start Base plate and rotating platen made of die cast aluminium, compact, rugged
More informationWays to get the most out of your
5 Ways to get the most out of your router table When you mount a router on a table, you expand your shop s potential. To help you take advantage of this potential, we assembled five router table techniques
More informationTOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
More informationP-System. Quotes. The P-System elements family continues to. Save time daily Differentiate your product
Quotes Urs Fehlmann, Production Manager HERZOG Küchen AG, Unterhörstetten TG «What impresses me most apart from its cost effectiveness is the enormous tensile strength of Clamex P.» «We use Clamex P as
More informationCNC Cooltool - Milling Machine
CNC Cooltool - Milling Machine Module 1: Introduction to CNC Machining 1 Prepared By: Tareq Al Sawafta Module Objectives: 1. Define machining. 2. Know the milling machine parts 3. Understand safety rules
More informationWOODWORKING TOOLS. Saws Sanders and Planers Laminate Trimmer
WOODWORKING TOOLS. Saws Sanders and Planers Laminate Trimmer WOODWORKING TOOLS. ROUTER AND JIGS The router is ideal for rebating, grooving and recessing work in workshops or on-site. The jig is invaluable
More informationSawing electrical cable ducts
No. 501 Sawing electrical cable ducts A Description This application example describes the exact sawing of a PVC cable duct with dimensions 130 x 68 mm using a portable circular saw TS 75. Electrical lines
More informationChapter 23: Machining Processes: Hole Making Part A (Lathe Operations, Boring, Reaming, Tapping)
1 Manufacturing Processes (2), IE-352 Ahmed M El-Sherbeeny, PhD Spring 2017 Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations,
More informationDisplay Case (for J&S)
Display Case (for J&S) This is constructed of maple plywood with solid maple (soft maple) edge banding. It was made to fit between a door and a kitchen cabinet, and has an elegant circular taper between
More informationCARPENTRY. Carpentry tools: The following are the tools that are made use of in all the wood working operations.
CARPENTRY INTRODUCTION: Carpentry may be defined as the process of making wooden components. It starts from a marketable form of wood and ends with a finished product. It Deals with the building work,
More informationTurning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
More informationThe perfect edge. User manual for the CONTURO system.
The perfect edge. User manual for the CONTURO system. The perfect edge. User manual for the CONTURO system. Introducing Wolfgang Reines. Carpenter. Product manager. Inventor. I always have mixed feelings
More informationGMR 1 PROFESSIONAL. ÁU~²Ýœ ÈULM¼« Àπ ß Õ ŸË Õ Èß π Petunjuk-Petunjuk untuk Penggunaan HıÎng dõn s dùng Instructions d emploi. Operating Instructions
609 40 44 - Buch Seite Dienstag,. Juni 004 :5 5 GMR PROFESSIONAL * Des idées en action. Operating Instructions Àπ ß Õ ŸË Õ Èß π Petunjuk-Petunjuk untuk Penggunaan HıÎng dõn s dùng Instructions d emploi
More informationA candle stick addresses transferring and reproducing dimensions from a plan and breaking the project into steps.
Activities Discussion These projects allow more skill development including making items to match a drawing, sizing projects to specific dimensions, and just trying fun stuff for the first time! A candle
More informationBENCH MORTICER. Woodworking Equipment Bench Morticer with Sliding Table. trade level
BENCH MORTICER 01944 Bench Morticer with Sliding Table A compact bench mounted morticer giving high levels of accuracy, ease of use with industrial features at an affordable price. An important feature
More informationPROMPT TRADING CO. Ph. No.: FOR RESCUE
FIRED UP FOR RESCUE 78 When it comes to rescuing life and limb, every movement must be just right. This day. Any obstacles in their way, such as a locked access point, present an immediate danger to those
More informationDrilling. Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL.
Drilling Drilling is the operation of producing circular hole in the work-piece by using a rotating cutter called DRILL. The machine used for drilling is called drilling machine. The drilling operation
More information15 Dovetail Jig. Instruction Manual. Part # 3452
15 Dovetail Jig Instruction Manual Part # 3452 CAUTION: Please read, understand, and follow all manufacturers instructions, guidelines and owners manuals that come with your power tools. Peachtree Woodworking
More informationCOFFEE TABLE WITH RECESSED TRAY
COFFEE TABLE WITH RECESSED TRAY Why not treat your guests to a tray laid with delicacies and then remove it from sight in your new coffee table. There's no easier way to show that you are a thoughtful
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationReamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed
1 Reamer Basics Reamers are available in a variety of types, materials, flute styles and sizes The typical reamer is a rotary cutting tools designed to machine a previously formed hole to an exact diameter
More informationWooden Hinge Plans by Roger Gifkins
Single Action Hinge Wooden Hinge Plans by Roger Gifkins Double Action Hinge Single Action Hinge Over the past 7 years I have produced two types of wooden hinges, a single action hinge (that is in effect
More informationSideboard. Essential design. Sideboard Unique eye-catcher and practical storage space all at once: The sideboard with fashionable multimaterial
Sideboard Essential design. Sideboard Unique eye-catcher and practical storage space all at once: The sideboard with fashionable multimaterial design. 1 Introduction From multi-material to one of a kind!
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationEdging. Overview of products and applications. Accessories and consumable materials The Festool system.
272 Overview of products and applications 274 CONTURO edge bander CONTURO KA 65, KP 65/2 Semi-stationary edge banding AP-KA 65, MFT/3 CONTURO 276 278 Accessories and consumable materials The Festool system
More informationTypical Parts Made with These Processes
Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts
More informationPERFORMANCE RACING AND ENGINE REBUILDING MACHINERY AND EQUIPMENT
PERFORMANCE RACING AND ENGINE REBUILDING MACHINERY AND EQUIPMENT F8A F8A with Big Block Merlin Features The F Series Boring Machines are unlike anything else available to the automotive and diesel engine
More informationMaking light work of sanding.
Making light work of sanding. ETS Eccentric sander. No compromises! ETS eccentric sander At a glance. Is it possible to make a successful product even better? We can. Festool always has perfect sanding
More informationSTEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
More informationRound profile joints with the handrail fence of the DOMINO jointer
No. 551 Round profile joints with the handrail fence of the DOMINO jointer A Description The DOMINO wood jointing system and the handrail fence (RA-DF 500) can be used easily and quickly to create round
More informationALFRA. Deburring Technology. Bevel Milling and Deburring Devices for the universal use B/79
ALFRA B Deburring Technology Bevel Milling and Deburring Devices for the universal use B/79 ALFRA Bevel Milling and Deburring Devices Overview Made in Germany by ALFRA Page B/84 Page B/86 Type KFV KFH
More informationMaking a Windsor Stool
Brian Clifford A Windsor Stool - page 1 Making a Windsor Stool The Windsor style The Windsor style is the name of a particular type of traditional English chair. Within this style there are a variety of
More informationPlan #1 Wooden hinge, single action
Plan #1 Wooden hinge, single action There are two types of wooden hinges, a single action hinge (that is in effect a finger joint with a pin through it) and a double action hinge which has two pins. The
More informationUseful accessories for lathe and milling systems.
1 Useful accessories for lathe and milling systems. Nearly all accessories are supplied in wooden boxes. For proper and value preserving storage! Dividing attachment TA 250 For precision lathe PD 250/E,
More information- 4 - Fig. 3b. Fig. 1b. Fig. 2. Fig. 2b MT 300
MP 00 Manual 1 7 6 9 8 5 1 1 10 11 1 Fig. 1a Fig. 1b MT 00 Breite Buche Erle Pappel Balsa 0 0,5 0,8 0,8 0,8 max. Zustellung mm 0 0, 0,6 0,8 0,8 60 0, 0, 0, 0,8 80 0,1 0,1 0, 0,6 n Messerwelle = 6.000/min
More informationA Unique Cutting Board
A Unique Cutting Board When I was asked to make a cutting board as a special gift, I wanted to do something new and eye-catching. Tired of squares and straight lines, I envisioned curving accents not shallow
More informationprecisely ground shoulder cutting edges make cylindrical, tear-free holes.
TC wood twist drill bit TURBOWOO 112 Wood twist drill bit 114 HSS wood twist drill bit 116 Wood twist drill bit KEILBIT 117 Auger bit lewis shape 118 Machine forstner drill bit 119 Flat bit KEILBIT 120
More informationEdge banding machines Ambition KDF 440 edition
04/13 creativ design Edge banding machines Ambition 1430-1440 KDF 440 edition A member of the Homag Group of Companies BRANDT Kantentechnik GmbH Weststraße 2 32657 Lemgo Germany Tel. +49 5261/974-0 Fax
More informationTurning and Related Operations
Turning and Related Operations Turning is widely used for machining external cylindrical and conical surfaces. The workpiece rotates and a longitudinally fed single point cutting tool does the cutting.
More informationDiagonal Cutters for plastics DIN ISO
Diagonal Cutters for plastics DIN ISO 5746 72 > cutting face flush ground > for nearly flush cutting of moulded plastic components from sprues > cuts soft materials such as lead in a flush cut > with opening
More informationWOOD PROCESSING TECHNOLOGY
WOOD PROCESSING 152 WOOD PROCESSING THEY HAVE ALREADY CONVINCED OVER 1 MILLION PROFESSIONALS WORLD-WIDE: METABO PORTABLE SAWS No matter which type of wood you are working with: The Metabo saw range offers
More informationWOOD DRILL BITS WOOD WORKING WITH PROFESSIONAL TOOLS HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES
WOO RILL WOO WORKING WITH PROFESSIONAL TOOLS WOO RILL METAL RILL RILL 184 Wood twist drill bit TURBOWOO 119 120 180 280 Wood twist drill bit 121 122 186 HSS wood twist drill bit 123 187 Wood twist drill
More informationSheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
More informationFast and flexible use Powerful results
Fast and flexible use Powerful results CORDLESS DRILLS AND BITS DRILL BIT GUIDE Turbo Stone Brad Point Bit Flat Wood Bit Lewis Auger Bit HSS-G Super-Pro Twist Drill Multimat Allmat Ceramic Master Concrete
More informationProgram overview Group 8
Program overview Group.1 Fittings for lightweight boards.1.0 -.1.1.2 Connecting fittings i Range summary.2.1.3 Adjustable fitting for head and foot ends / height adjustable leg / shelf supports / cabinet
More informationHornsby Woodworking Men s Shed. Guide to the Shed s Woodworking Machines
Guide to the Shed s Woodworking Machines SP00 Purpose The primary purpose of this document is to assist the induction of new members of the Hornsby Woodworking Men s Shed in the identification and understanding
More informationAUTOMATED MACHINE TOOLS & CUTTING TOOLS
CAD/CAM COURSE TOPIC OF DISCUSSION AUTOMATED MACHINE TOOLS & CUTTING TOOLS 1 CNC systems are used in a number of manufacturing processes including machining, forming, and fabrication Forming & fabrication
More informationSPIDA SAW OPERATIONS MANUAL
SPIDA SAW OPERATIONS MANUAL CM SERIAL NUMBER. OCTOBER 2000 CONTENTS Page description 1.) Contents 2.) Safety First 3.) CM Overview 4.) CM Specifications 5.) CM Installation 6.) CM Operation Setting the
More informationPROFILCUT. Fastest and finest precision and finish quality for manufacturing of windows, doors, furniture and flooring
PROFILCUT PROFILCUT higher performance more profitability ProfilCut Q ProfilCut Q Premium Fastest and finest precision and finish quality for manufacturing of windows, doors, furniture and flooring PROFILCUT
More information