HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use
|
|
- Tobias Wells
- 5 years ago
- Views:
Transcription
1 Mitre saws with pull function HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Features soft start Base plate and rotating platen made of die cast aluminium, compact, rugged and easy to transport at the same time Laser projection on the workpiece for precise control of the cutting position Infinitely adjustable double mitre and double angle Adjustable stop rails and laterally extendable support aids for longer workpieces 2x adjustable cutting depth limiter with an easily convertible stop With pull function for an extended cutting range With C-clamp and clamping device as factory standard to safely hold the workpiece With extraction duct for a dust collection bag or connecting an external extraction unit Double angle With double angle and double mitre as a factory standard 2x adjustable cutting depth limiter Cut laser for checking the cut position Screw clamp for workpiece clamping Extendable stop rails right and left With screw clamp for safe workpiece fixing as factory standard With C-clamp and clamping device as factory standard to safely hold the workpiece Laser projection on the workpiece for precise control of the cutting position KGZ 305 Article no kw 230 V Saw blade speed 4500 rpm Saw blade ø 305 Cutting capacity for angle/mitre (height x width) At 0 /0 100 x 340 At 45 /0 left 40 x 340 At 45 /0 right 40 x 340 At 0 /45 left 100 x 240 At 45 /45 left 40 x 240 At 45 /45 right 40 x kg Dimensions L max x W max x H 835 x 570 x C-clamp Clamping device Dust-collection bag Saw blade Ø 305 x 3.2 x Ø 30 Z48 Accessories Article no. Saw blade 305 x 3.2 x 30, Z60 WZ neg. 5 perfect for panels Saw blade 305 x 3.2 x 30, Z72 TF neg. for non-ferrous metals, plastic profiles
2 Mobile table saw HOLZSTAR Mobile table saw TKS 255 M The compact table saw for mobile use. Ideal for DIY workshops and DIY enthusiasts. Suitable for mobile use, or stationary use in the workshop Easy to move thanks to integrated chassis with transport rollers and pull-out handle The height and angle of sawing unit can be adjusted from the operator side using a handwheel The chip collection sack pulls out and can be quickly and easily emptied using a zipper With workpiece pusher for safe and easy workpiece Fig. shows accessories: folding chassis, Art. no TKS 255 M Article no Max. cutting height 90 /45 80/56 Max. cutting width with stop 620 Mitre stop 60 (left/right) Table dimensions (L x W) 640 x 730 Table height without chassis 380 Table height with chassis* 800 Speed 4500 rpm 1.8 kw 230 V / 50 Hz 32 kg Dimensions (L x W x H) 760 x 800 x 500 * Chassis as accessory guidance during sawing and milling Vertical storage possible thanks to integrated feet The optional, folding feet allows user to quickly set up the machine without tools for an optimum working height; they simply fold in for transport or spacesaving storage Practical: Easy to transport Space-saving storage Mobile table saw TKS 255 M incl. wheeled chassis Carbide saw blade 254 / Z36 Table width and length extension Rip fence Mitre stop Chip bag Workpiece pusher Folding chassis Accessories Article no. Saw blade 254 x 30 x 2.6, Z Dust collection bag Saw blade height adjustment via handwheel Fast extension of the work table without needing tools Integrated chip sack with practical table extension Saw blade inclination angle adjustable via handwheel Parallel stop with eccentric quick coupling, easily and precisely adjustable via scale Mitre stop and workpiece pusher with practical holders 19 Workshop equipment Extraction Turning Sawing Multi-purpose combinations Planing Sanding and grinding
3 Table saws HOLZSTAR table saw TKS 315 E Deployable as a table saw for interior fitting out or as a site table saw Generously dimensioned steel machine table, galvanized as a factory standard to prevent corrosion Saw blade pivots from 0 to 45 ; adjustable without tools via star handle bolts Saw blade height adjustment via handwheel and scale Large aluminium rip fence with eccentric quick release Easy to move thanks to integrated chassis with transport rollers and folding handles Scope of supply incl. carbide saw blade Ø 315 / Z24 Machine not preassembled The rip fence is designed for peeling boards, rip cutting, bevelling, and angled cutting Sliding carriage with ball-bearings, infinitely adjustable from -45 to +45 with quick release lever Easy height and angle adjustment of the sawing unit with a simple handwheel and star wheel bolts Easy to move thanks to integrated chassis with transport rollers and folding handles TKS 315 E Figure shows factory standard table extension, sliding carriage with mitre stop and second aluminium stop TKS 315 E Article no. (230 V) Article no. (400 V) Max. cutting height 90 /45 83/60 Table dimensions 800 x 550 Table height 800 Speed 2800 rpm 2 kw/2.8 kw 230 V / 400V / 50 Hz Extraction port Ø top: 38 /bottom: kg 20 Chassis Sliding carriage Table width/length extension Rip fence Carbide saw blade Ø 315 / Z24 Accessories Cross cutting replaceable saw blade 28 teeth, Ø 315 Article no
4 Table saws HOLZSTAR table saw TKS 315 Pro premium, precision table saw. Universally deployable for interior fitting out or as a site table saw Generously dimensioned steel machine table, galvanized as a factory standard to prevent corrosion The factory standard table length extension can also be fitted on the right as a table width extension. Saw blade pivots from 0 to 45, precisely and easily adjustable to a single degree of accuracy via handwheel and scale Large central extraction duct Ø 100 Sliding carriage with ball-bearings, infinitely adjustable from -45 to +45 with quick release lever TKS 315 Pro (400 V) Figure with table extension accessory and aluminium profile on mitre stop (not included) TKS 315 Pro Article no. (230 V) Article no. (400 V) Max. cutting height 90 /45 90/50 Table dimensions (L x W) 800 x 550 Table height 810 Speed 2800 rpm 2.2 kw/2.8 kw 230 V / 400V / 50 Hz Extraction duct Ø top: 38 /bottom: 100 Net weight 44 kg Dimensions (LxWxH) 2000 x 1360 x 1000 Saw blade height adjustment also via handwheel from the operator side The stable sawing unit mounts at the front and rear allow for precise cutting. Powerful industrial motor with brake; designed for continuous operation Thanks to the powerful motor, hardwood can be processed with ease Incl. saw blade protective hood with integrated extraction duct The switch/plug combination with emergency stop switch is lockable. The TKS 315 Pro is available in 230-volt or 400-volt versions. Chassis Sliding carriage Table length extension Rip fence Carbide saw blade Ø 315 / 36 Z Mitre stop without aluminium profile (profile available as accessory) Easy to move thanks to integrated chassis with transport rollers and folding handles Locking switch/connector combination The folding feet and fast release screws allow fast and easy folding of the machine for transport or space-saving storage The rip fence is designed for peeling boards, rip cutting, bevelling, and angled cutting The rip fence with eccentric quick release can be precisely and easily adjusted thanks to the scale. Features precise, easy-action height and angle adjustment of the sawing unit thanks to easy to use handwheels. Accessories Article no. Cross cutting replaceable saw blade 28 teeth, Ø Additional table extension right, 800 x Alum. profile for mitre stop Extraction Turning Sawing Multi-purpose combinations Planing Sanding and grinding Workshop equipment
5 Table saws HOLZSTAR table saw TKS 250 SC Ideal for beginners and demanding DIY enthusiasts. Very robust and precise design with premium sliding carriage The heavyweight grey cast iron table allows for low-vibration work and precise, straight cuts Factory standard sliding carriage with ball bearings and bolt-on clamp sleigh Pivoting, pull-out telescope stop up to 228, stop rail for mitre cuts on both sides, 45 With optical magnifying lens on telescope stop Mitre stop adjustable from -45 to +45 Saw blade pivots from 0 to 45, easily adjustable via gear rack mechanism with rotary knob and scale Saw blade height adjustment is via handwheel from the operator side Large aluminium rip fence with rod guides and eccentric quick release Powerful industrial motor with brake; designed for continuous operation Large central extraction duct (Ø 100 ) Incl. saw blade protective hood with integrated extraction duct ø 38 Including carbide saw blade ø 250 / 36 Z Locking switch/connector combination Sliding table with extension Clamp sleigh Rip fence Table width extension with support foot Carbide saw blade 250 / 36 Z New TKS 250 SC (230 V) TKS 250 SC (400 V) Article no Max. cutting height 90 /45 42 / / 80 Max. cutting width with stop Mitre stop 45 (left/right) 45 (left/right) Table (LxW) 800 x x 348 Table height approx Triing length Table length extension (L x W) 800 x x 355 Speed 4000 rpm 4000 rpm 2.5 kw 2.5 kw 230 V / 50 Hz 400 V / 50 Hz Extraction duct Ø top: 38 /bottom: 100 top: 38 /bottom: kg 190 kg Dimensions (LxWxH) 950 x 760 x x 760 x With folding magnifying lens on cross cut stop. Allows for precise reading of the desired setting.
6 Chassis TKS 250 SC Angle stop TKS 250 SC Accessories Article no. Angle stop for TKS 250 SC Chassis (1) (2) (3) (4) HOLZKRAFT saw blades for TKS 250 SC Diameter Drill hole Cutting width Teeth Article no. (1) Cross-cutting flat toothed circular saw blade for all round use (2) Cross-cutting replaceable circular saw blade for rip and cross cutting solid wood and board materials; chip thickness limitation reduces blade break-out due to loose knots and other inclusions (3) Peeling and finish cut circular saw blade for finish cutting of solid wood and other materials (4) Special sliding and peeling circular saw blade for board materials, covered with veneer, plastic, melamine, paper, etc.; 30 replaceable teeth, and negative rake angle guarantee tear-out free cutting without using a scoring unit, noise-damping thanks to special laser elements for noise reduction Precise, easy-action height and angle adjustment of the sawing unit via easily operable handwheels. The saw blade pivots through 45. The cross cut stop supports mitre cuts on both sides, 45 With two extraction ducts at the sides (Ø 100 ) Pivoting telescope stop on sliding carriage; extendable to 2280, and foldable 23 Workshop equipment Extraction Turning Sawing Multi-purpose combinations Planing Sanding and grinding
7 Panel saws HOLZSTAR sliding table saw FKS E Very robust and precise design with sliding carriage The grey cast iron work table allows for low-vibration work Extendable telescopic stop, pivots from -45 to +45 Saw blade pivots from 0 to 45 via handwheel and scale Saw blade height adjustment via handwheel Large central extraction duct Ø 100 Incl. saw blade protective hood with integrated extraction duct ø 38 Saw blade pivots from 0 to 45, easily adjustable via gear rack mechanism with rotary knob and scale Large aluminium rip fence with rod guides and fine adjustment FKS E Article no Max. scoring saw blade - Max. cutting height 90 / / 75 Max. cutting width with stop 940 Table dimensions 760 x 350 Table height 870 Triing length 1370 Table length extension 350 x 500 Table width extension 600 x 760 Saw blade speed 4250 rpm Scoring blade rotational speed kw 400V / 50 Hz Extraction duct Ø 38 / kg Dimensions (LxWxH) in 3480 x 2430 x Sliding carriage with boom Clamp sleigh Rip fence with rod guide and fine adjustment (1) (2) HOLZKRAFT saw blades for FKS E Diameter Drill hole Cutting width Teeth Article no. (1) Cross-cutting replaceable circular saw blades for rip and cross cutting of solid wood and board materials. Chip thickness limitation reduces blade break-out due to loose knots and other inclusions (2) Peeling & finish cutting circular saw blades for finish cutting of solid wood & various materials
8 Sliding table saws with scoring unit HOLZSTAR sliding table saw FKS E Robust and precise design with sliding carriage and scoring unit With scoring unit as factory standard Extendable telescopic stop, pivots from -45 to +45 with finely-adjustable flip stop Robust and precise design with sliding carriage The grey cast iron work table allows for lowvibration work Saw blade height adjustment via handwheel FKS E Article no Max. scoring saw blade 90 Max. cutting height 90 / / 80 Max. cutting width with stop 1220 Table dimensions 680 x 580 Table height 870 Triing length 2000 Table extension Rear table 310 x 500 Steel extension table 440 x 800 Saw blade speed 4000 rpm Scoring blade rotational speed 5800 rpm 4.0 kw 400V / 50 Hz Extraction duct Ø 38 / kg Dimensions (LxWxH) in 4330 x 4155 x 1150 Saw blade pivots from 0 to 45 via handwheel and scale Stable sawing unit guarantees vibration-free and precise work Solid extension table with roller and telescope arm for maximum stability Mitre stop and hold-down unit sliding across entire carriage length (1) (2) Powerful drive motor for constant cutting speed, even at 100 cutting height Generously dimensioned work table and factory standard table extension for cutting widths up to 1220 Large aluminium rip fence with rod guides and fine adjustment Sliding carriage with boom Material roll on boom Rip fence with rod guide and fine adjustment Table length extension Table width extension Flip stop Clamp sleigh Eccentric clamp Scoring unit HOLZKRAFT saw blades for FKS E Diameter Drill hole Cutting width Teeth Article no. (1) Cross-cutting replaceable circular saw blades for rip and cross cutting of solid wood and board materials. Chip thickness limitation reduces blade break-out due to loose knots and other inclusions (2) Peeling & finish cutting circular saw blades for finish cutting of solid wood & various materials Workshop equipment Extraction Turning Sawing Multi-purpose combinations Planing Sanding and grinding
WOOD PROCESSING TECHNOLOGY
WOOD PROCESSING 152 WOOD PROCESSING THEY HAVE ALREADY CONVINCED OVER 1 MILLION PROFESSIONALS WORLD-WIDE: METABO PORTABLE SAWS No matter which type of wood you are working with: The Metabo saw range offers
More informationFLUSH-MOUNTED CIRCULAR SAWS
NO TEARS NO EFFORT. The basic principle is pulling instead of pushing. Those who have had to cut long, unhandy or particularly hard workpieces, know that pulling is easier and cleaner than pushing. Considerably
More informationfor all big jobs. Always the right tool More information. UB9 5HJ Middlesex Uxbridge Denham Broadwater Park Robert Bosch Ltd
Robert Bosch Ltd Broadwater Park Denham Uxbridge Middlesex UB9 5HJ 1619GB5S17 UK Printed in Federal Republic of Germany Subject to technical alterations. No liability is accepted for printing errors. More
More informationSemi-stationary Woodworking
M+ SYSTEM: MACHINE AND ACCESSORIES PERFECTLY SYNCHRONISED FOR ACCURATE CUTS. Even during the development phase at Metabo, machines and accessories are optimally adjusted and tested to complement one another.
More informationB/54. Ergonomically designed handle. Motor with highperformance. Continuously adjustable mitres up to 45 (with 5 locking positions)
Ergonomically designed handle Motor with highperformance gear box Continuously adjustable mitres up to 45 (with 5 locking positions) Solid base plate Automatically retracting blade guard /54 ALFRA RotaSpeed
More informationChapter M03: Tile Cutting Machines, Saw Benches, Joint Cutters and Vibratory Plates
Maschines and Accessories Chapter : Tile Cutting Machines, Saw Benches, Joint Cutters and Vibratory Plates Cutting Machines Tile Cutting Machines Core Drills Submersible Pumps Saw Benches Vibratory Plates
More informationCHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
More informationSTANDARD S STRIEBIG 4D CONTROL EVOLUTION STANDARD S STANDARD COMPACT. VERSATILE PRECISE SOLID Universal vertical sawing technology
WWW.STRIEBIG.COM STRIEBIG 4D CONTROL EVOLUTION STANDARD COMPACT VERSATILE PRECISE SOLID Universal vertical sawing technology UNIVERSAL VERTICAL SAWING TECHNOLOGY The Swiss label symbolises quality, safety,
More informationV 91 basic V 91 twin II 690-B easy4mat pro 690-B easy4mat basic. Panel rip and crosscut saws. It s the result that matters
V 91 basic V 91 twin II 690-B easy4mat pro 690-B easy4mat basic Panel rip and crosscut saws It s the result that matters V 91 basic - 5,7 Touch-Screen Display of the current cutting height and input field
More informationAluminium extruded side rails perfectly align with the saw blade.
Triton TWX7 Workcentre A versatile woodworking station that can be fitted with both a router module and a saw table module without additional adjustments TWX7 Workcentre Triton is a brand that is well-known
More informationA powerful piece. T65
A powerful piece. T65 2 3 A decision for generations: T65 from the Premium Compact Class T65 Saw blade tilting single-sided The perfect combination of tradition and innovation in the Premium Compact Class.
More informationTwin-column guide for extra stability. The sliding compound mitre saws KAPEX KS 88 and KS 120
Twin-column guide for extra stability. The sliding compound mitre saws KAPEX KS 88 and KS 120 Tools for the toughest demands Double the precision : KAPEX KS 88 KS 120. The KAPEX KS 88 and the KS 120 are
More informationPS Panel Saw Ø315mm Max. Blade Diameter $2, $2, Product Brochure For W700. Description. Features
PS-1810 - Panel Saw Ø315mm Max. Blade Diameter Ex GST Inc GST $2,690.00 $2,959.00 ORDER CODE: W700 MODEL: PS-1810 Max. Blade Diameter (mm): Ø315 Table Size (W x H) (mm): 820 x 800 Table Size With Extensions
More informationJET Heavy-Duty B3NCH 10" Jobsite Table Saw
JET Heavy-Duty B3NCH 10" Jobsite Table Saw The JET Heavy-Duty 10" Jobsite Table Saw brings many of the capabilities of a full-sized table saw to the jobsite, small or temporary woodworking shops. The unique
More informationENG classic Catalogo Minimax Classic_Ing.indd 2 Catalogo Minimax Classic_Ing.indd 2 13/12/ /12/
classic ENG the range UNIVERSAL COMBINED MACHINES CU 41O CLASSIC page 06 CU 3OO CLASSIC page 07 SURFACING- THICKNESSING PLANERS FS 41 CLASSIC SIC page 08 FS 3O CLASSIC page 09 SAW-SPINDLE MOULDER ST 3
More informationsales dept. Italy: foreign sales dept.: registered offi ce: sales offi ce: classic
ENG SCM INDUSTRIA SPA PROFESSIONAL WORKSHOP MACHINERY via Valdicella, 7-47892 Gualdicciolo - Repubblica San Marino sales dept. Italy: tel. +378 0549 876911 - fax +378 0549 999604 foreign sales dept.: tel.
More informationThE ChOICE OF PROFESSIONALS FOR DECADES: hedge TRIMMERS by METAbO
hedge TRIMMERS ThE ChOICE OF PROFESSIONALS FOR DECADES: hedge TRIMMERS by METAbO Metabo hedge trimmers have always been setting standards. Even our latest hedge trimmers offer unique advantages: Our developers
More informationMY NEW WA 80. FEATURES, OPTIONS.
MY NEW WA 80. FEATURES, OPTIONS. 2 ALTENDORF WA 80 Two models, one promise: Performance, you can count on. WA 80 TE Page 4 WA 80 X Page 6 Altendorf WA 80 TE with motorised rise / fall and tilt adjustment
More informationPLANING MACHINES ADM 311 PT 410 FS 410 N FS 400 V AD 410 S AD 410 P SP 150 SP 200 SP 300 TH 330
PLANING MACHINES PT 200 PT 250 PT 200 ED PT 260 ADH 250 ADM 260 PT 310 FS 310 N ADM 300 ADM 300 V 2012 ADM 311 PT 410 FS 410 N FS 400 V AD 410 S AD 410 P SP 150 SP 200 SP 300 TH 330 TP 410 DH 520 DH 630
More informationALFRA PRESS. Made in Germany by ALFRA
52 ALFRA PRESS Made in Germany by ALFRA 53 ALFRA PRESS Overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 56 Page 58 Control cabinet housing, control cabinet doors, mounting plates Control cabinet housing,
More informationProfessional Power Tools & Accessories
Professional Power Tools & Accessories NEW Engine and outputs sold separately. 6.5HP 3L 20cm Ø 3150min -1 2.4KW (50Hz) 10.5A (230V) 21A (110V) 230V (16A) BS4343 AC 175 Bar 6m 8L / in 1L Powered by 75mm
More informationTSM 355 MKS 355 CS 225 CS 250 eco CS 250 CS 315 L CS 350 L CS 275 H CS 315 H CS 350 SA EBS 85 B EBS 100 B
O.R.P.I., S.L. C/ Juan de la Cierva, 23 50014 Zaragoza Tel: 976 471 440 www.orpi-sl.com orpi@orpi-sl.com TSM 355 MKS 355 CS 225 CS 250 eco CS 250 CS 315 L CS 350 L CS 275 H CS 315 H CS 350 SA EBS 85 B
More informationsi 300 s nova manual, electronically programmable circular saws si 7500
si 300 s nova manual, electronically programmable circular saws si 7500 scmcircular saws The widest range of circular saws offering the market the latest and advanced technological solutions that different
More informationsi 300 s nova electronically programmable and manual circular saws
si 300 s nova and manual si 75 scm The widest range of offering the market the latest and advanced technological solutions that different types of production urgently requires. O3 L invincibile the exclusive
More informationALFRA. Deburring Technology. Bevel Milling and Deburring Devices for the universal use B/79
ALFRA B Deburring Technology Bevel Milling and Deburring Devices for the universal use B/79 ALFRA Bevel Milling and Deburring Devices Overview Made in Germany by ALFRA Page B/84 Page B/86 Type KFV KFH
More informationHEAVY DUTY BENCH GRINDERS
HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with
More informationRYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET
RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding
More information4D - high-end sawing centre CONTROL EVOLUTION STANDARD COMPACT. The Universal Class for Vertical Panel Saws
4D - high-end sawing centre CONTROL EVOLUTION COMPACT The Universal Class for Vertical Panel Saws Experience, skill, precision Tried-and-tested over decades, it can almost be considered the VW-Beetle of
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationNow s the time for the all-rounder. T60C
Now s the time for the all-rounder. T60C 2 3 A decision for generations: T60C from the Premium Compact Class T60C Saw blade tilting single-sided The new all-rounder in the Premium Compact Class. As versatile
More informationSAWS JET 10 Proshop Tablesaw JET 14 Industrial Bandsaw JET 18 Bandsaw PLANER/THICKNESSERS JPT260M Jet Combo Planer/Thicknesser JPT310 Jet Combo Planer/Thicknesser JML1014I Jet Combo Planer/Thicknesser
More informationMODEL G0501 SLIDING TABLE SAW
MODEL G0501 SLIDING TABLE SAW MANUAL UPDATE The Sliding Table Saw has changed slightly from when the manual was originally written. We have improved the crosscut fence, extension tables, blade guard assembly,
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationSägen Hobeln Fräsen. T65 Sliding-Table Saw. Englisch
Sägen Hobeln Fräsen T65 Sliding-Table Saw Englisch 2 The MARTIN sliding-table saws provide cutting-edge performance for the long-term! Apart from maximum precision and long life, MARTIN offers major components
More informationFrom now on sawing will be fun. T75 PreX
From now on sawing will be fun. T75 PreX 2 3 A decision for generations: T75 PreX from the Premium Class T75 PreX When you want to bequeath a classic to the next generation today. We have built a lot of
More informationFKS 325 IQ FKS 350 IQ
Horizontal Panel Saw Sliding Table Saw CNC Machining Center Edgebander EN PREFACE Wood IQ is your smart choice A good foundation means everything Tanja Lohmeyer Peter Lohmeyer We are Lohmeyer Our machines
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationRYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET
RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP
More informationTrade Bandsaw Range D C
Trade Bandsaw Range Startrite has long been associated with high quality bandsaws that offer reliable service over many years. This new family of machines draws on that tradition and offers exceptional
More informationvario drive turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker
turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker DC motor Ribbed prism bed made of grey cast iron, inductively hardened and ground Hardened and ground
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationJET 12" Sliding Dual Bevel Compound Miter Saw
JET 12" Sliding Dual Bevel Compound Miter Saw The JET (#JMS-12SCMS) 12" Sliding Dual Bevel Compound Miter Saw expands the wide-ranging capabilities of the SCMS (sliding compound miter saw) with the increased
More informationLooking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
More informationSPIDA SAW OPERATIONS MANUAL
SPIDA SAW OPERATIONS MANUAL CM SERIAL NUMBER. OCTOBER 2000 CONTENTS Page description 1.) Contents 2.) Safety First 3.) CM Overview 4.) CM Specifications 5.) CM Installation 6.) CM Operation Setting the
More informationRYOBI 10 in. TABLE SAW MODEL NO. BTS16 REPAIR SHEET
RYOBI 0 in. TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A FIGURE E FIGURE H FIGURE C FIGURE D 0 0 FIGURE B 0 0 NOTE A WARNING: Improper electrical repair of the table saw can result in damage to the drive
More informationRYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET
RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,
More informationsaw SP 13V Transportable mitre belt saw with high cutting precision, particularly low-noise and infinitely variable saw belt speed
METAL BAND SAWS SP 13V Transportable mitre belt saw with high cutting precision, particularly low-noise and infinitely variable saw belt speed Ball bearing mounted saw band guiding providing outstanding
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning Face clamping disc Ø 170 mm 3440295 Face clamping disc Ø 240 mm 3441352 Face clamping disc Ø 250 mm 3440552 Face clamping disc
More informationSägen Hobeln Fräsen. T60 Sliding Table Saw. Englisch
Sägen Hobeln Fräsen T60 Sliding Table Saw Englisch 2 MARTIN Sets Standards Why a MARTIN machine is something very special. Page 4 T60 Basic The woodworker s introduction to MARTIN s world of sawing. Page
More informationJET JWBS-14DXPRO Band Saw
JET JWBS-14DXPRO Band Saw To satisfy a common woodworker s desire for increased vertical capacity we designed the JET JWBS-14DXPRO Band Saw to feature a full 12 of resaw capacity without the addition of
More informationSägen Hobeln Fräsen. T60 Sliding Table Saw. Englisch
Sägen Hobeln Fräsen T60 Sliding Table Saw Englisch The MARTIN sliding-table saws provide cutting-edge performance for the long-term! Apart from maximum precision and long life, MARTIN offers major components
More informationnd saws tal ba Me 139
Metal band saws 139 Saw band information s The feedstock is a two-component material (bi-metal) attained by electrode welding. The band which is manufactured from this material has a hard curable, hard-wearing
More informationThe Altendorf WA 6: compact, powerful, outstanding.
The Altendorf WA 6: compact, powerful, outstanding. WA 6 in non-ce version, shown with 2600 mm (102.36 inch) double roller carriage (not available in North America) Compact, but an Altendorf. WA 6 in CE
More informationJET 10" Sliding Dual Bevel Compound Miter Saw
JET 10" Sliding Dual Bevel Compound Miter Saw The JET (#JMS-10SCMS) 10" Sliding Dual Bevel Compound Miter Saw enhances the capabilities of the SCMS (sliding compound miter saw) design with a full set of
More informationSägen Hobeln Fräsen. T65 Sliding-Table Saw. Englisch
Sägen Hobeln Fräsen T65 Sliding-Table Saw Englisch 2 The MARTIN sliding-table saws provide cutting-edge performance for the long-term! Apart from maximum precision and long life, MARTIN offers major components
More informationTP300. Large planing in a small space.
TP300 Large planing in a small space. 2 3 A decision for generations: TP300 planer in the Basic Line TP300 Durable, even in the smallest space. If there is not a lot of space in your workshop, but you
More informationRODIA Diamond Core Drilling Hand-Operated and Stationary Wet Drilling
Hand-Operated and Stationary Wet Drilling RODIADRILL Ceramic ECO Hand-operated and stationary wet drilling machine, drill Ø 6-67 mm Further developed for hand-operated and stationary wet drilling in the
More informationRYOBI 10 in. TABLE SAW - MODEL NO. BT3000
FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR
More informationENGLAND. Tel +44 (0) Web
Industrial Woodworking Machinery Startrite has long been associated with high quality bandsaws that offer reliable service over many years. Startrite 403, 503 and 603 Industrial Bandsaw Range 1 Bl Sco
More informationTABLES SAWS Laguna Fusion 10 tablesaw Laguna Platinum 10" Tablesaw Laguna Platinum Dovetail 10 Tablesaw BANDSAWS Laguna 14 Bandsaw 14 Twelve Laguna LT14 SUV Bandsaw Laguna 18 Bandsaw LT 18 3000 PLANERS
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION P 1 / 11 Model No. Description CONCEPT AND MAIN APPLICATIONS Specification Standard equipment TCT saw blade... 1 Rear table set (exclusively Europe, Turkey, South Africa..1 2704 This
More informationHS120 - Table Saw Ø315mm Max. Blade Diameter
HS120 - Table Saw Ø315mm Max. Blade Diameter Ex GST Inc GST $450.00 $495.00 ORDER CODE: MODEL: Max. Blade Diameter (mm): Table Size (W x H) (mm): Table Size With Extensions (mm): Max. Depth Of Cut 90º
More informationWOOD LATHES. Woodworking Equipment. sales hotline Wood Lathe 1 Metre Starter Kit Variable Speed Midi Wood Lathe Cast Iron
01488 Wood Lathe 1 Metre Starter Kit The heavy-duty ½hp induction motor gives smooth reliable performance and means this lathe is ideal for both spindle and faceplate turning. This machine is ideal for
More informationElite model AFILAmaq MD CNC
Elite model AFILAmaq MD CNC Automatic carbide tipped circular saw sharpening machine with two CNC axes Elite model AFILAmaq MD CNC Automatic and economical carbide tipped circular saw blade top and face
More informationInformation on the New T60C Automatic Sliding Table Saw
Information on the New T60C Sliding Table Saw Page 1 Basic features of the T60C : Sliding table length: 3.00 meters (other lengths are available as an option) Same hardened steel guide system like on all
More informationOptions book Sliding table saws
Options book Sliding table saws www.martin.info Alongside the basic equipment sliding table saws from MARTIN have numerous, useful and also patented options, which perfect your workpiece and add value
More informationBENCH MORTICER. Woodworking Equipment Bench Morticer with Sliding Table. trade level
BENCH MORTICER 01944 Bench Morticer with Sliding Table A compact bench mounted morticer giving high levels of accuracy, ease of use with industrial features at an affordable price. An important feature
More informationTechnical Specification
Technical Specification Machining line English 10 / 2008 Machining line Machining line TEKNA was established in 1964 to produce efficient aluminum machining systems. The major role played by this material
More informationTypical Parts Made with These Processes
Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts
More informationHow to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced)
How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) 1. Press and hold the set button (top left corner) until the display shows Fun
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning TU 1503 TU 2004 TU 2304 TU 2404 TU 2506 TU 2807 D 320 TU 3209 D 330 D 360 TU 3610V TZ 4012 D 420 TU 4210V D 460 TU 4615V TZ 5216
More informationTimber construction. Overview of products and applications. Carpentry portable circular saw HK 132
332 Overview of products and applications 334 Sword saws SSU 200, IS 330 Carpentry portable circular saw HK 132 Hand-held planer PL 205, PL 245 Chain mortiser CM 150 335 337 338 339 Accessories and consumable
More informationBlower Cutter Jig Saw Circular Saw Circular Saw Drill High Speed Drill High Speed Drill Mixer Hammer Drill Hammer Drill Demolition Hammer
Index M00 M00 M0801K M0901 M0920 M0921 M1902 M2300 M2401Z M3600 M3601 M3700 Cutter Drill Power Planer Compound Miter Saw Portable Cut-off Router Router (Plunge type) Trimmer 08 08 M4000 M4101 M4301 M5801
More informationKawasaki engineered for Professionals. Power, Ergonomics and Design in Perfection. Kawasaki active and attractive at the Point of Sale.
POWER PRODUCTS Kawasaki engineered for Professionals Innovative and dynamic quality products - this was the ultimate goal for the development of this range of tools and machines for professional craftspeople
More informationFlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company
FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company The universal genius from RAIMANN: FlexiRip is synonymous with flexible ripping The original Jrion from Raimann stands for
More informationTOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
More informationFlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company
FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company The universal genius from WEINIG: FlexiRip is synonymous with flexible ripping The original Jrion from WEINIG stands for
More information23 WOODWORKING EQUIPMENT
23 WOODWORKING EQUIPMENT Chisel Mortiser Chisel mortiser... 1199 Cutting Machine Heavy duty band saw... 1197 Scroll saw... 1197 Dust Collector Dust collector... 1201 Overarm Router Overarm router... 1202
More informationServoturn 410. Servoturn 410. Lathe. Conventional Precision Lathe with servo drive.
Lathe Conventional Precision Lathe with servo drive easy to operate, more reliable, more precise, for higher loads and reduced maintenance Mineral-Casting Machine Frame preloaded ball screws electronic
More informationPRECISION CUTTING MICRACUT 202
PRECISION CUTTING MICRACUT 202 MICRACUT 202 MICRACUT 202 precision cutters are used for precise and deformation-free cutting of Metals, Ceramics, Electronic Components, Crystals, Composites, Biomaterials,
More informationKRONOS S. Key data. Precision for small workpieces. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Precision for small workpieces Key data The offers maximum precision for small workpieces. This compact and versatile centerless grinding machine combines speed with
More information$ incl. Ø 12 5/8 /84T HM saw blade and 4 ft 7 guiderail $ Filip De Vis Cell: Tel:
The first metal circular saw with 4 3/4 cutting depth (on guiderail) $ 999.00 incl. Ø 12 5/8 /84T HM saw blade and 4 ft 7 guiderail Ref. 608270USET $ 899.00 incl. Ø 12 5/8 /84T HM saw blade Ref. 608270US
More informationApril 2018 Edition STANDARD DUTY
April 2018 Edition STANDARD DUTY INDUSTRIAL POWER TOOLS Index Angle Grinder 4 Belt Sander 4 Blower 6 Circular Saw 5 Compound Mitre Saw 5 Demolition Hammer 3 Drill 3 Jig Saw 5 Finishing Sander 4 Rotary
More informationInnovative woodworking machinery
MF30 Innovative woodworking machinery MOReTENs have been manufacturing woodworking machinery in Sweden for over 25 years. The innovative design of our machines is shaped by our customers needs, bringing
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 80 mm versatile for many applications for
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationenglish classical machines
english classical machines classical machines circular saws planers spindle moulders 04 22 40 circular saws The widest range of circular saws offering the market the latest and advanced technological
More informationSAWING CATALOG. GRAINGER.COM/CHOICE l Grainger
SAWING CATALOG GRAINGER.COM/CHOICE l 1.800.Grainger BENCH MITER BAND SAW A bench top band saw comes with large cutting capacities. Easy to move and position where needed this lightweight bench unit is
More informationOptions book Planers
Options book Planers www.martin.info Alongside the basic equipment MARTIN planers have numerous, useful and also patented options, which perfect your workpiece and add value to your machine. Easily configure
More informationTS4001. Model # 10 inch Table Saw addendum SETUP & OPERATION MANUAL
SETUP & OPERATION MANUAL Features Powerful 13 amp motor Cast aluminum work table Riving knife Anti-kickback pawls Includes: 10 in. 24 tooth tungsten carbide tipped saw blade Rip fence Miter gauge Push
More informationIntroduction to Carpentry Power Tools
Youth Explore Trades Skills Introduction to Carpentry Power Tools Description s use power tools every day, and the ability to use these tools correctly and safely is paramount. In this Activity Plan, students
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationP225 STANDARD FEATURES OPTIONAL FEATURES
CIRCULAR COLD SAWS P225 Manually operated Robust sawing head miters 45 left Bench top model no base Single blade speed of 1 HP Manual vise Material work stop rod for multiple cuts of the same length Flood
More informationSECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
More informationCATALOGUE WOOD WORKING JET HAS 50 YEARS EXPERIENCE IN WOOD WORKING MACHINES SOLID CONSTRUCTION FOR ACCURACY AND LONG LIFE
Jet products are Swiss customised and built to a high standard of accuracy. Cast iron construction ensures a lifetime of reliable performance WOOD WORKING CATALOGUE JET HAS 50 YEARS EXPERIENCE IN WOOD
More informationFERROUS AND NON-FERROUS MATERIAL
Aluminum Cutting Small Material Large Material Brush Deburring Compound Angles In and Outside Deburring FERROUS AND NON-FERROUS MATERIAL MADE IN GERMANY H350 & H450 For production cutting of mild steel
More information