Information for your Installer. Scope Furniture Range

Size: px

Start display at page:

Download "Information for your Installer. Scope Furniture Range"

Arnold Sanders
6 years ago
Views:

1 Information for your Installer Scope Furniture Range Version : 1.0 ate : 1st pril 2012

2 ontents 1 - Message to Homeowner 2 - Product Selector - Identify product to be installed 3 - Installation Location - Your Special Installation Instructions - learance Guideline 4 - Site Preparation 5 - General Installation Information - Product Installation - Plumbing Installation - rawer Installation 6 - Product Specifications - asin Specifications - Furniture Specifications Message to Homeowner Product Selector Installation Location Site Preparation General Installation Information Product Specification

3 Message to Homeowner 1 IMPORTNT PLS R THIS IF YOU R TH HOMOWNR Thank you for choosing St Michel bathroom furniture. We are here to help you to achieve the outcomes you want so we d like to offer you some guidance around the installation process. Planning this and ensuring the correct guidelines are followed is not only vital to ensuring you re happy with the end result and that the bathroom is properly functional and will stand the test of time. It will also make the process as smooth as possible by minimising the possibility of any misunderstandings and installation mistakes by your builder or plumber. Your role in the project We understand that creating or upgrading your bathroom is not a simple matter and that you ll need to rely on professional tradespeople. That said, it s important you take an active role in over-seeing the project. Please read the guideline overview on the next page. This will ensure you provide your installer with the information required so he/she: 1. Properly understands your desired bathroom layout. 2. Understands that you expect your furniture to be installed to St Michel s guidelines. nsuring your bathroom is covered by our warranty nother reason to ensure your installation professional follows our guidelines, is not doing so could affect your warranty cover should anything go wrong now or in the future. 06/12

4 Message to Homeowner 1 IMPORTNT PLS R THIS IF YOU R TH HOMOWNR Guideline Overview Section 2 Product Selector Tick your chosen furniture. Give this section to your installer so they know what product you have selected and its exact specifications. Section 3 Installation Location Identifying the installation location sounds simple, but in homes with multiple bathrooms it pays to be very clear. on t forget to add your special installation preferences before giving this to your installer. Section 4 Site Preparation This is a set of site preparation instructions for your builder, but you should read it too. iscuss the three points on this document to make sure you both agree exactly what is to be done. Pay particular attention to the height level and wall support information. Section 5 General Installation Information This includes installation information for both your uilder and your Plumber as they will split the tasks on the job - plumbers take varying degrees of involvement in product installations. Make it very clear to both of them that points 1-8 must be followed to the letter. Section 6 Specifications General product specifications - while not necessary for installation this information could be useful to your installer, so it doesn t hurt to provide this as well. 06/12

5 Scope Product Selector 2 Scope Product Selector Use the following charts to identify what product you intend to install. This will help your installer in the planning phase.

Scope Product Selector 2 1 Identify which cabinet you chose 2

Woodgrain left side basin Scope Wall 900L - 1 rawer Mineral

rawer Mineral ast W 900 H 450 500 ark Oak bony Oak harred Oak

right side basin une ape od Scope Wall 900L - 2 rawer Mineral

900 H 700 500 3 Features Softclose is standard on all drawers

all vanities Internal drawers finished in rctic Grey Gloss

ast W 1200 H 450 500 right side basin Scope Wall 1200R - 1

Scope Wall 1200L - 1 oor - 2 rawer Mineral ast W 1200 H 700

6 Scope Product Selector 2 1 Identify which cabinet you chose 2 Identify which cabinet colour you chose urashell White Gloss Woodgrain left side basin Scope Wall 900L - 1 rawer Mineral ast W 900 H right side basin Scope Wall 900R - 1 rawer Mineral ast W 900 H ark Oak bony Oak harred Oak Greyed Oak Light Oak Washed Oak Zebrano asalt left side basin right side basin une ape od Scope Wall 900L - 2 rawer Mineral ast W 900 H Scope Wall 900R - 2 rawer Mineral ast W 900 H Features Softclose is standard on all drawers and doors Mushroom Universal click clack waste supplied with all vanities Internal drawers finished in rctic Grey Gloss left side basin Scope Wall 1200L - 1 oor - 1 rawer Mineral ast W 1200 H right side basin Scope Wall 1200R - 1 oor - 1 rawer Mineral ast W 1200 H left side basin Scope Wall 1200L - 1 oor - 2 rawer Mineral ast W 1200 H right side basin Scope Wall 1200R - 1 oor - 2 rawer Mineral ast W 1200 H

7 I H Site Preparation 4 PLNNING : SIT PRPRTION N PLUMING IMPORTNT: PLS R PRIOR TO INSTLLTION 1 POSITIONING FURNITUR POSITION IS IMPORTNT H - 50mm to 150mm I - 150mm to 300mm When deciding on the position of the furniture, be sure to arrange the product at least 150mm from any wet areas such as baths, spas and showers. nsure that the floor is level (floor mounted) and that the wall is straight and plumb. NOT : o not expose furniture to shower spray - good quality shower screen must be fitted to the bath or shower to keep the furniture dry and to prevent water damage. 2 HK LVLS HK FOR PLUM WLLS N LVL FLOOR Walls When installing a vanity (furniture) to a wall, it is essential that the wall is plumb and straight. If it is not possible to make the wall plumb and straight you must pack the vanity out so that it does not follow the out of aligned wall. WRNING : Fixing the vanity on a wall that is not plumb and straight will result in the following : Will result in Sagging Front corner lift Fixing Points Horizontal - Wall NOT straight entre divider entre drop Plan view Front corner lift - abinet will sag as illustrated. - abinet will twist out of alignment and not be plumb. - rawers will not function as designed. i.e. They will appear racked, will not run correctly or smoothly and if self-closing, will not close on their own. - oors will not align or be able to be adjusted to align. - Vanity/basin will appear to have an accentuated twist. Plumb Wall Out of Plumb Wall Vertical - Wall NOT straight Floor s with wall hung vanities, floor standing vanities must sit on a level floor or be packed so they sit level and true. WRNING : Fixing a vanity to a floor that is not level will result in the same adverse symptoms that appear with rawers/oors and Vanity. Levelling Support Side view 3 FRMING SUPPORT NOGS STU STU STU SUPPORT NOG Recommended x 50 Wall hung furniture and V basins that require wall fixing Support nogs are to be fitted between the studs, as detailed, to give a solid wall backing to attach the vanity. Fix the top nog at 900mm above the floor and ensure the total width exceeds the vanity width. Floor Level

8 General Installation Information INSTLLTION INSTRUTIONS IMPORTNT: PLS R PRIOR TO INSTLLTION We recommend that a qualified, licensed tradesperson install this vanity and we would expect the installation to be undertaken in a tradesman like manner and finished to a tradesman standard. This product carries a full warranty against faulty workmanship and materials. Please inspect thoroughly before installation to ensure that the unit has not been damaged in transit. nsure that the water temperature does not exceed 55 for safety and to avoid possible damage to your vanity basin. 4 INT WLL HUNG & FLOOR STNING FURNITUR Remove the doors and/or drawers to provide access to the inside rear wall of the cabinet (note that all hinges are quick release for easy removal). For wall hung vanities - mark the position of the top of the vanity. The work surface would typically be set at a height of 850mm to 900mm. If the top (basin) is packed separately deduct the thickness of the top from the finished height to determine the correct height for the top of the cabinet. rill holes for plumbing in the back panel or base of the cabinet with an appropriate sized hole saw. WRNING : o not secure the unit to the wall until the vanity is sitting level, plumb and square. Use suitable packing to achieve this if the wall cannot be aligned. Position unit and check that it is sitting level, plumb and square. 100 max. 250 approx. L 250 approx. 100 max. Screw Fixing : For wall hung vanities. Fixings must be into solid timber and must be no more than 100mm from each side of the cabinet. The installer must provide additional fixing points evenly spread at approximately 250mm centres along the top of the back panel. NOT : ouble fixings each side. 850 to 900 Floor standing vanities should, likewise, be checked for sitting level, plumb and square and suitably packed to achieve this. Screw fix to the wall to secure either through the back rail or back panel. 5 TOPS FITTING TOPS TO FURNITUR crylic Top If the top is not attached to the cabinet, fit the taps and waste then spot glue it to the top of the cabinet with xpandite S adhesive, Panel ond or something similar. eramic Top uring the complex manufacturing process ceramic tops shrink considerably and can be slightly uneven. It is recommended that the top be fixed to the cabinet with silicone so the top will not rock or move. pply the silicone to the top edges of the cabinet then postion the top. If the cabinet is wall hung then the ceramic top should also be fixed to the solid timber in the wall with the fasteners packed with the top. NOT : Not all ceramic tops are designed to be wall fixed. 06/12

9 General Installation Information 5 INSTLLTION INSTRUTIONS IMPORTNT: PLS R PRIOR TO INSTLLTION 6 WST FITTING WST ORRTLY lign slots with basins internal holes. In a ceramic basin, hand tighten the waste - do not overtighten or the basin may be damaged. Use suitable overflow waste and align the slots with the internal holes in the basin and ensure that no excess silicone or putty is obstructing the water flow. 7 SLING Materials used for the construction of this unit are water resistant and not waterproof. bead of sealant (specifically formulated for bathrooms) must be used to seal all edges where water penetration can occur. i.e. etween the cabinet and the wall and the floor, between the vanity top and the top edge of the cabinet and between a vessel basin and the top surface.take care to dry any spillage or leakage of water onto or into the cabinet during installation. 8 HING JUSTMNT It is the responsibility of the installer to make any adjustments to align doors after installation if required. St Michel use clip hinges which require only light finger pressure to clip into place and allow the doors to be easily removed for access to plumbing fittings. OOR LIGNMNT Your doors have been adjusted in the factory on a level surface to achieve matching height, equal gap and surface alignment. efore you adjust the doors, ensure again that the vanity is level and true and not twisted. When level, if the doors still do not align, adjustment can be made to the hinges as follows:. SI JUSTMNT To move the doors sideays in total or to level each door, turn screw clockwise or anti-clockwise.. PTH JUSTMNT To move the door inward or outward from the carcass - loosen the hinge arm fastening screw and slide in the direction you want to go. Retighten hinge arm fastening screw.. HIGHT JUSTMNT Loosen the top and bottom screw on each mount plate, adjust and retighten. IMPORTNT WRRNTY NOTI Please note that in the event that the vanity is not installed in accordance with these instructions the St Michel warranty may be voided. ny modifications to the product will void any warranty. Please ensure that the Warranty and onditions of Use card is left in the cabinet for the homeowner. 06/12

10 General Installation Information 5 SOP Please note: With wall hung vanities, we suggest you adjust the measurements to suit your individual height preference. 900 Left Side asin 900 Right Side asin F F Single rawer Wall Hung Two rawer Wall Hung Finished Floor Level 1200 Left Side asin 1200 Right Side asin atten atten F F Finished Floor Level Fitting asin Support atten for 1200 Scope basin: (atten supplied with Scope vanity) We recommend that the 1200 Scope basin is supported at the back of the basin with a support batten that sits on the external surface of the wall to avoid unwanted flexing along the back edge of the basin. Step 1: Place basin onto cabinet and mark the underside of basin to determine batten height. Step 2: Remove basin and measure 300mm in from opposite end of waste. Step 3: Line up the top edge of the batten with the line marked on the wall showing the underside of the basin. Then fasten batten to the wall. escription asin (asin Top) (abinet Height) Scope 900 1dr Scope Scope 900 2dr Scope Scope d 1dr Scope Scope d 2dr Scope F Standard Supply Tap Hole 1 olour White Integral Overflow Yes If you increase or decrease height of vessel basin (i.e. dimension ) then + dimensions must be amended accordingly. F measurement is bottom of basin outlet to centre of wall waste pipe - if another waste trap is used, you will have to confirm F measurement suits or adjust accordingly. NOT: Waste outlet positioned for qualing 40mm Space Trap. O: SP40 ll dimensions are in millimetres nominal. St Michel Industries Ltd has the right to change product and specifications without notice. 06/12

11 General Installation Information 5 SOP RWR OX INSTLLTION RLSING RWR To release a drawer from the cabinet, remove both the left hand and right hand cover caps on the drawer unit. Push rear lever upwards on both sides of the drawer unit at the same time. t the same time as lifting the rear levers, pull the drawer out. This will release the drawer from the cabinet runners. RFITTING RWR To refit a drawer to the cabinet, align the drawer onto the runners. Push the drawer into the cabinet on the runners. You will hear a click as the runners and drawer locate. Press the side cover caps onto the drawer sides when finished. Press in Press in 06/12

12 Product Specifications 6 SOP SIN MINRL ST ONSOL SIN Scope escription Scope 900 L/H Scope 900 R/H Scope 1200 L/H Scope 1200 R/H F (owl length) F 50 (owl Width) Standard Tap Size Standard Waste Size asin epth epth to Overflow 35 mm 32 mm 90 mm 42 mm ll dimensions are in millimetres nominal. 06/12

Product Specifications 6 SOP Scope escription Scope Wall 900 1dr 900 500 450 890 490 Scope Wall 900 2dr 900 500 700 890 490 Scope Wall 1200 1d 1dr 1200 500 450

13 Product Specifications 6 SOP Scope escription Scope Wall 900 1dr Scope Wall 900 2dr Scope Wall d 1dr Scope Wall d 2dr (Wall Hung) (Wall Hung) Front View Side View Front View Side View ll dimensions are in millimetres nominal. 06/12

Toilet Vanities: Sub & Nes 400. Planning & Installation Information

Planning & Installation Information Toilet Vanities: Sub & Nes 400 Guideline Overview 1 Homeowner Message Understand your role in the project. 2 Product Specification Selection of product and general product