Disclaimer: This presentation was developed by a third party and is not funded by WoodWorks or the Softwood Lumber Board.
|
|
- Phyllis Hunt
- 5 years ago
- Views:
Transcription
1 Disclaimer: This presentation was developed by a third party and is not funded by WoodWorks or the Softwood Lumber Board.
2 The Wood Products Council is a Registered Provider with The American Institute of Architects Continuing Education Systems (AIA/CES), Provider #G516. Credit(s) earned on completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-aia members are available upon request. This course is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. Questions related to specific materials, methods, and services will be addressed at the conclusion of this presentation.
3 Course Description While it is exciting to see enthusiasm for large and tall timber building concepts among building designers, what does it actually take to efficiently engineer and build these structures? How can a mass timber office building be cost-competitive with steel or concrete, while still maintaining elegance and quality? This session will use real projects as a means to explore practical considerations in structural engineering, 3D, manufacturing, logistics and installation. Projects will include the Cavender Office building in San Antonio, Texas, currently under construction, as well as T3 Atlanta, the largest mass timber building completed in the US to date.
4 Learning Objectives 1. Discuss design considerations necessary to achieve economical multi-story mass timber buildings. 2. Identify structural opportunities for mass timber systems. 3. Explore potential impacts of erection techniques and prefabrication on mass timber designs. 4. Discuss dowel-laminated timber (DLT) and how it differs from other mass timber products.
5 AGENDA
6 WHO WE ARE StructureCraft is North America s leading Timber Engineer-Builder Engineering, Fabricating, and Installing Signature Timber Structures since 1998.
7 WHO WE ARE
8 WHO WE ARE StructureCraft is North America s leading Timber Design-Builder
9 WHO WE ARE
10 WHO WE ARE StructureCraft is North America s leading Timber Design-Builder
11 VALUE WE BRING
12 VALUE WE BRING
13 VALUE WE BRING
14 VALUE WE BRING
15 VALUE WE BRING
16 OUR EXPERTISE Custom Architectural Structures
17 OUR EXPERTISE Long-Span Roof Structures
18 OUR EXPERTISE Timber Footbridges
19 OUR EXPERTISE Mass Timber Structures
20 Timber Design & Construction MASS TIMBER OVERVIEW
21 MASS TIMBER What is It?
22 MASS VALUE TIMBER WE BRING Intimate knowledge of North American and European supply chain for all mass timber products: Capacity Pricing Quality Dependability
23 MASS TIMBER European CLT Production
24 MASS TIMBER Key Benefits
25 MASS TIMBER Key Benefits
26 MASS TIMBER Key Benefits
27 MASS TIMBER Fire Performance Fire Testing 2x6 DLT = 2hr FRR (E119) ASTM E119 and CAN/ULC S101 FRR test passed in October ASTM E84 FSR tests Class B Flame Spread Test reports available upon request
28 MASS TIMBER Key Benefits
29 MASS TIMBER Key Benefits
30 MASS TIMBER Key Benefits
31 MASS TIMBER Key Benefits
32 MASS TIMBER Key Benefits
33 MASS TIMBER Key Benefits
34
35 OFFICE BUILDINGS Key Issues
36 OFFICE BUILDINGS Key Issues
37 OFFICE BUILDINGS Key Issues
38 OFFICE BUILDINGS Key Issues
39 OFFICE BUILDINGS Key Issues
40 OFFICE BUILDINGS Key Issues
41 OFFICE BUILDINGS Key Issues
42 OFFICE BUILDINGS Key Issues
43 OFFICE BUILDINGS Key Issues
44 WEATHER PROTECTION
45
46
47 MASS TIMBER
48
49
50
51
52 T3 MINNEAPOLIS, Minnesota Hines MGA Architecture DLR Group MKA
53
54 Key Data
55 Key Data
56 Key Data
57 Key Data
58 Key Data
59 Key Data
60 Key Data
61 Key Data
62 Key Data
63
64
65
66
67 T3 Atlanta Atlanta, Georgia Hines DLR Group HPA MKA
68 Key Data
69 Key Data
70 Key Data
71 Key Data
72 Key Data
73 Key Data
74 Key Data
75 Key Data
76
77
78
79
80 111 East Grand Office Des Moines, Iowa Ryan Co, Neumann Monson
81 Key Data
82 Key Data
83 Key Data
84 Key Data
85 Key Data
86 Key Data
87 Key Data
88 Key Data
89 Key Data
90 Key Data
91
92
93
94 Cavender Office Project SAN ANTONIO TEXAS Lake Flato Architects with BOKA Powell, Hixon
95 Key Data
96 Key Data
97 Key Data
98
99 Why Automate?
100
101
102 DOWEL-LAMINATED TIMBER Panel Production
103 DOWEL-LAMINATED TIMBER Panel Production
104 DOWEL-LAMINATED TIMBER Key Advantages
105 DOWEL-LAMINATED TIMBER Key Advantages
106
107 DOWEL-LAMINATED TIMBER Standard Profiles
108
109
110
111
112
113
114
115
116
117
118 DOWEL-LAMINATED TIMBER A New Mass Timber Product
119
120 DOWEL-LAMINATED TIMBER Timber-Concrete Composite
121 DOWEL-LAMINATED TIMBER Key Advantages
122
123 DOWEL-LAMINATED TIMBER Key Advantages
124
125 DOWEL-LAMINATED TIMBER Key Advantages
126 DOWEL-LAMINATED TIMBER A New Mass Timber Product
127 DOWEL-LAMINATED TIMBER Key Advantages
128 DOWEL-LAMINATED TIMBER Key Advantages
129 MASS TIMBER Acoustic Performance Acoustic Assembly Testing (STC/IIC) STC and IIC testing completed by FPInnovations report in progress Interestingly DLT raw panels seems to perform better than CLT DLT IIC = CLT IIC + 10pts DLT STC = CLT STC + 3pts STC/IIC reports available in 2 months
130
131
132
133
134
135
136 Questions? This concludes The American Institute of Architects Continuing Education Systems Course Gerald Epp Jr.
Fire Resistance Design Primer for Mass Timber Construction
Fire Resistance Design Primer for Mass Timber Construction (AWC presentation DES602-2) Paul Coats, PE, CBO Southeast Region Manager American Wood Council The American Wood Council is a Registered Provider
More informationUnderstanding Moisture Performance of Wood: Insights on Design and Construction
Understanding Moisture Performance of Wood: Insights on Design and Construction Presented June 2015 by Ronald W. Anthony Disclaimer: This presentation was developed by a third party and is not funded by
More informationConnection Design Examples
Connection Design Examples Using the 2015 NDS (DES345) Lori Koch, P.E. Manager, Educational Outreach American Wood Council Adam Robertson, M.A.Sc., P.Eng. Manager, Codes and Standards Canadian Wood Council
More informationNational Design Specification for Wood Construction. Copyright Materials. Learning Objectives
National Design Specification for Wood Construction The Wood Products Council is a Registered Provider with. Credit(s) earned on completion of this program will be reported to AIA/CES for AIA members.
More informationConnection Solutions for Wood-frame Structures. Copyright Materials. Learning Objectives
Connection Solutions for Wood-frame Structures Presented by: John Buddy Showalter, P.E. Vice President, Technology Transfer The Wood Products Council is a Registered Provider with. Credit(s) earned on
More informationThe Wood Products Council is a Registered Provider with. . Credit(s) earned on completion of this program will be
Connection Solutions for Wood-frame Structures Presented by: John Buddy Showalter, P.E. Vice President, Technology Transfer The Wood Products Council is a Registered Provider with. Credit(s) earned on
More informationRenewed use of wood in commercial construction
CONNECTION SOLUTIONS IN MODERN TIMBER STRUCTURES Woodworks Webinar June 14, 2011 The Wood Products Council is a Registered Provider with The American Institute of Architects Continuing Education Systems
More informationIntroducing the New Architectural Woodwork Standards
New Architectural Woodwork Standards Presented by AWI President 2010: Doug Carney R & S Casework Fargo, ND (701) 298-0252 doug@randscasework.com Introducing the New Architectural Woodwork Standards Leveraging
More informationRenewed use of wood in commercial construction. Learning Objectives
CONNECTION SOLUTIONS IN MODERN TIMBER STRUCTURES Long Beach Wood Solutions Fair March 02, 2011 The Wood Products Council is a Registered Provider with The American Institute of Architects Continuing Education
More informationOne App at a Time: How Technology Promotes Safety in the Design & Construction Industry
One App at a Time: How Technology Promotes Safety in the Design & Construction Industry RLI Design Professionals DPLE 290 May 16, 2018 RLI Design Professionals is a Registered Provider with The American
More informationContinuing Education Credit
BIM + CM-at-RISK = Saves You Time & $$$ Especially on Renovation Projects PeterMcElwain,AIA ArtCampbell,AIA Facilities/Planning RickScott,LEEDAP,CPC JohnCook.CPC CM-at-Risk/Construction JenniferS.Henrikson,AIA,LEEDAP
More informationDesigning with Glass. Privacy & Translucency
Designing with Glass Privacy & Translucency AIA Registered Provider GANA is a Registered Provider with The American Institute of Architects Continuing Education Systems. Credit earned on completion of
More informationAIA Continuing Education
AIA Continuing Education Hall & Company is a Registered Provider with the American Institute of Architects Continuing Education Systems. Credit earned based on the completion of this program will be reported
More informationConnections in CLT Assemblies
Creating forest sector solutions www.fpinnovations.ca Connections in CLT Assemblies Cross Laminated Timber Symposium Vancouver, BC February 8-9, 2011 M. Mohammad Building Systems Wood Products Division
More informationon Paint and Coatings Sam Williams Madison, Wisconsin WoodWorks Webinar 23 August 2010 Learning Objectives
Wood Properties and Their Effects on Paint and Coatings Sam Williams Forest Products Laboratory (Retired) Madison, Wisconsin WoodWorks Webinar 23 August 2010 Wood Products Council is a Registered Provider
More informationProduct Guide Specification
Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat,
More informationWoodWorks. WoodWorks. WoodWorks. WoodWorks. Wood Products Council. Introduction. Technical Director WoodWorks Southeast Technical Manager ilevel
Wood Products Council WoodWorks A RESOURCE FOR DESIGN PROFESSIONALS Incorporated as the WPC in December 2006 WoodWorks WoodWorks Engineers Architects Developers General Contractors Building owners Builders
More informationMass$Timber$Building$Systems:$ Understanding$the$Op9ons$
Mass$Timber$Building$Systems:$ Understanding$the$Op9ons$ Presented(on(May(11 th,(2016(by(bernhard(gafner( P.Eng.,(MIStructE,(C.Eng.,(Dipl.Ing.(FH/STV( ( Disclaimer: This presentation was developed by a
More information2010 ADA Standards Courtroom Requirements
2010 ADA Standards Courtroom Requirements LIFT-U Division of Hogan Mfg., Inc. P.O. Box 398 Escalon, CA 95320 http://liftu.hogan.com Slide 1 of 50 2010 ADA Standards Courtroom Requirements LIFT-U Division
More informationCopyright Materials. Vorarlberg, Austria - A Model for Sustainable Timber Architecture. Learning Objectives
The Wood Products Council is a Registered Provider with The American Institute of Architects Continuing Education Systems (AIA/CES). Credit(s) earned on completion of this program will be reported to AIA/CES
More informationWoodWorks Connection Design Workshop
WoodWorks Connection Design Workshop Bernhard Gafner, Struct.Eng, P.Eng, MIStructE, Dipl. Ing. FH/STV bernhard@aspectengineers.com Adam Gerber, P.Eng, M.A.Sc. adam@aspectengineers.com Disclaimer: This
More informationObjectives. Develop an understanding of how high quality commercial seating is built for safety and durability. Learn what makes a chair comfortable.
Built for Tomorrow Objectives Develop an understanding of how high quality commercial seating is built for safety and durability. Learn what makes a chair comfortable. Understand what drives the cost of
More informationCollins Engineers Palmetto Islands County Park Boardwalk Repairs 03/28/2014 SECTION ROUGH CARPENTRY
PART 1 GENERAL 1.1 RELATED SECTIONS SECTION 061000 ROUGH CARPENTRY A. Drawings and general provisions of the Construction Contract, including General Conditions and Division 1 Specification Sections, apply
More informationLEED Credits From Church Furniture
LEED Credits From Church Furniture LEED Data From Church Furniture LEED Credits Wood Characteristics for LEED Information Available On Request AIA/CES Program # NHC570 USGBC United States Green Building
More informationnineteen Wood Construction 1 and design APPLIED ARCHITECTURAL STRUCTURES: DR. ANNE NICHOLS FALL 2016 lecture STRUCTURAL ANALYSIS AND SYSTEMS ARCH 631
APPLIED ARCHITECTURAL STRUCTURES: STRUCTURAL ANALYSIS AND SYSTEMS DR. ANNE NICHOLS FALL 2016 lecture nineteen wood construction and design Wood Construction 1 Timber Construction all-wood framing systems
More informationCustom Millwork Fabrications
Custom Millwork Fabrications Laminate Casework Lab Casework Excellence To experience quality craftsmanship and service excellence, choose Northwest Cabinets, Inc. for all of your custom casework manufacturing.
More informationFOCUSED EXHIBITION ON
w w w. n e p a l w o o d. c o m. n p FEB 15-17, 2019 BHRIKUTIMANDAP, KATHMANDU, NEPAL FOCUSED EXHIBITION ON Concurrent Event Panels & Plywood Woodworking Machinery Furniture Production Technologies Laminates
More information(Construction) Level 2 NVQ Diploma in Wood Occupations. *CITB unit ref 641 Conforming to general health, safety and welfare in the workplace 1
Qualification : NVQ Diploma in Wood Occupations (Construction) Pathway 1: NVQ Diploma in Wood Occupations (Site Carpentry) Pathway : NVQ Diploma in Wood Occupations (Architectural Joinery) Pathway 3: NVQ
More informationBuilt for Tomorrow 1
Built for Tomorrow 1 OBJECTIVES Develop an understanding of how high quality commercial seating is built for safety and durability. Learn what makes a chair comfortable. Understand what drives the cost
More informationAIChE Baton Rouge Spring / 2017 Seminar
AIChE Baton Rouge Spring / 2017 Seminar Tank University: Tank Venting Fundamentals, API 2000 Overview, Normal & Emergency Venting Devices, Forward & Back-Pressure Regulators, Tank Blanketing Systems, Overfill
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22847-7 Any reference to SABS 0155 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Accuracy in buildings Published
More informationALONA YANSHINA EXERCISE 1.1
material makeup: log ALONA YANSHINA EXERCISE 1.1 timeline + development log cabin - interlocked corners by cutting notches in the ends of the logs. using log joinery technique, structures grew higher logs
More information602.4, TABLE 602.4, , , , , , , , , TABLE
602.4, TABLE 602.4, 602.4.1, 602.4.2, 602.4.3, 602.4.4, 602.4.5, 602.4.9, 2304.11, 2304.11.1, TABLE 2304.11.1.1, 2304.11.2, 2304.11.3, 602.4.8, 602.4.8.2, 602.4.8.1, 602.4.6, 602.4.6.2, 602.4.6.1, 2304.11.4,
More informationBRIDGE TYPE CONCEPT EVALUATION
SD44/PLATTE-WINNER BRIDGE CORRIDOR STUDY AND ENVIRONMENTAL ASSESSMENT Agreement No. 410583, Work Order PD-19-16 Project Nos. HP5596(19); P0044()290, PCN 05X0 PROJECT MEMORANDUM BRIDGE TYPE CONCEPT EVALUATION
More informationStrands & Standards CARPENTRY 2
Strands & Standards CARPENTRY 2 COURSE DESCRIPTION This is the second in a sequence of courses that prepares individuals to layout, fabricate, erect, install, and repair wooden structures and fixtures
More informationWhat Are Submittals?
Introduction Overview of the Submittal Process Comparison of AIA with ConsensusDOCS Architect and Contractor Obligations FAR Requirements State Licensing Requirements 1 What Are Submittals? Submittals
More informationOVERVIEW OF PRECAST INDUSTRY IN BRAZIL. ABCIC s Experience Brazilian Precast Concrete Association Íria Lícia Oliva Doniak
OVERVIEW OF PRECAST INDUSTRY IN BRAZIL ABCIC s Experience Brazilian Precast Concrete Association Íria Lícia Oliva Doniak EVOLUTION OF THE BRAZILIAN MARKET Some preliminary cases of precast - beginning
More informationHASSLACHER NORICA TIMBER from wood to wonders. From wood to wonders. CLT, GLT and further hightec wood products
HASSLACHER NORICA TIMBER from wood to wonders. From wood to wonders CLT, GLT and further hightec wood products Future Building Vienna, 2018-05-08 DI Georg Jeitler Innovations Standardisations Certifications
More informationCLT Connections Design Seminar on CLT Design, including Connections, and Resistance to Lateral and Gravity Loads
CLT Connections Design Seminar on CLT Design, including Connections, and Resistance to Lateral and Gravity Loads Moncton, NB December 1, 2015 Overview Why connections in CLT are different from other EWP
More informationSecondary Wood Products Manufacturing 2015
Secondary Wood Products Manufacturing 2015 Forest Industry Sectors Tertiary Primary Secondary Forest Industry Sectors Tertiary Secondary Primary Primary Sector Sawmilling Pulp and paper Composite panel
More informationOut of the Gallery and Onto the Streets: Community-Based Art Initiatives
AIA Rochester A001 ROC2015- Out of the Gallery and Onto the Streets: Community-Based Art Initiatives Maarten Jacobs, Director, Near Westside Initiative, Syracuse Sarah C. Rutherford Artist, co-founder
More informationChanges in the 2001 NDS for Wood Construction
Changes in the 2001 NDS for Wood Construction Philip Line, P.E.; Dr. Robert Taylor, P.Eng.; John Buddy Showalter, P.E.; Bradford K. Douglas, P.E. Introduction The 2001 Edition of the National Design Specification
More information45 Minute Rated Mineral STC35/34 (FD5-45PP STC 35/34) Bonded Mineral Core, 5-Ply Construction, Cat. A, PP
45 Minute Rated Mineral STC35/34 (FD5-45PP STC 35/34) Bonded Mineral Core, 5-Ply Construction, Cat. A, PP (Fire Test Standards IBC, UL-10C, CAN/ULC S104, & NFPA 252) Single Swing (STC35) Pair or Double
More informationDOOR SPECIFICATIONS FLUSH HOLLOW CORE
FLUSH HOLLOW CORE Specifications: 3 & 5 Ply construction. Meets or exceeds industry standards of WDMA I.S.1. Lay Up Method Loose Maximum Sizes: Width - 4/0. Length depends on face (See faces below for
More informationB03 3 Bay Garage with 50 Gable End Roof
B03 3 Bay Garage with 50 Gable End Roof Supplied as a Building Kit in 100% Green Oak (including Air Dried Oak Pegs). KIT SPECIFICATION Dimensions include 230mm 3-course brick plinth Height: 5995mm Width:
More information1.03 QUALITY ASSURANCE A. Inspection Agencies: 1. SPIB: Southern Pine Inspection Bureau; for all structural framing of roof joists and headers.
DIVISION 6 - WOOD AND PLASTICS SECTION 06100 - ROUGH CARPENTRY PART 1 - GENERAL 1.01 SUMMARY A. Section Includes: 1. Rough carpentry for: a. Wood framing and sheathing for the new Rest Area building additions.
More informationConnection Options for Wood-Frame and Heavy Timber Buildings Effective solutions provide strength, stiffness, stability and ductility
Photo: Robert Benson Photography Portland Jetport, Portland, Maine Architect: Gensler Southern pine glulam was chosen for this 40,000-sf roof because of its ability to span long distances with minimal
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ASPHALT SHINGLES REPORT HOLDER: CERTAINTEED CORPORATION EVALUATION SUBJECT:
0 ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org Most Widely Accepted and Trusted ESR-3537 Reissued 06/2018 Revised 08/2018 This report is subject to renewal 06/2019.
More informationSUBMITTAL TRANSMITTAL
SUBMITTAL TRANSMITTAL GENERAL CONTRACTORS 835 GIL HARBIN INDUSTRIAL BLVD. VALDOSTA, GA 31601 (229) 244-6709 Fax (229) 244-7778 DATE June 1, 2010 JOB NO. 09-019 TO: BES Incorporated 2712 Bull Street Beaufort,
More informationSubject Description Form
Subject Description Form Subject Code Subject Title Credit Value BRE222 Workshop Practices and Draftsmanship 3 Academic Credits Level 2 Pre-requisite/ Co-requisite/ Exclusion Objectives Nil 1) Provide
More informationPRODUCT INTRODUCTION
PRODUCT INTRODUCTION ABOUT Edmondson Park Railway Station, NSW PRODUCT DESCRIPTION Manufactured by Fairview; Vitranamel is a decorative, high strength architectural panel with an incredibly tough, almost
More information20 Minute Rated Barrier Resistant (BR SCL5-20PP) Bonded SCL Core, 5-Ply Construction, Cat. A, PP
20 Minute Rated Barrier Resistant (BR SCL5-20PP) Bonded SCL Core, 5-Ply Construction, Cat. A, PP (Fire Test Standards IBC, UL-10C, CAN/ULC S104, & NFPA 252) Single Swing ONLY Core Type & Standards Structural
More informationThe renaissance of our industry!
TM Canadian wood products and advanced building systems revolution or evolution? Chris Gaston, PhD FRST 100 Fall 2017 Overview Canadian fibre supply land base, production and trade End-use markets Lumber,
More informationICBO Evaluation Service, Inc Workman Mill Road, Whittier, California / 16
ER-5736 Reissued September 1, 2002 ICBO Evaluation Service, Inc. 5360 Workman Mill Road, Whittier, California 90601 www.icboes.org Filing Category: FASTENERS Wood Hangers and Framing Anchors USP LUMBER
More informationTotal precast solution for large stadium projects meet tight schedule
Tailor Made Concrete Structures Walraven & Stoelhorst (eds) 2008 Taylor & Francis Group, London, ISBN 978-0-415-47535-8 Total precast solution for large stadium projects meet tight schedule T.J. D Arcy
More information(Construction) v5. Level 2 NVQ Diploma in Wood Occupations. *CITB unit ref 641 Conforming to general health, safety and welfare in the workplace 1
Qualification : NVQ Diploma in Wood Occupations (Construction) v5 Pathway 1: NVQ Diploma in Wood Occupations (Site Carpentry) Pathway : NVQ Diploma in Wood Occupations (Architectural Joinery) Pathway 3:
More informationSkylight Shading System Silent Gliss Skylight Shading Systems Silent Gliss 8600, 8700 & 8800
Skylight Shading System Silent Gliss 8800 Skylight Shading Systems Silent Gliss 8600, 8700 & 8800 The sun - an essential energy source of life. Daylight is vital to our lives, giving us the vigour to
More informationChallenges for productivity and industrialized Construction Bmst. Ing. Martin Dobler Austria
Challenges for productivity and industrialized Construction Bmst. Ing. Martin Dobler Austria 26.7.2017 Structure of the talk Industrialization Building systems Building systems with precast concrete Economy
More informationBYG DTU. Performance of old glulam structures in Europe. Hilmer Riberholt. Rapport R ISSN ISBN / 18
BYG DTU 1 / 18 Hilmer Riberholt Performance of old glulam structures in Europe DANMARKS T E K N I S K E UNIVERSITET Rapport BYG DTU R-177 2007.12.04 ISSN 1601-2917 ISBN 9788778772527 2 / 18 Performance
More informationGK Industries.
+91-8048601061 GK Industries https://www.indiamart.com/gk-industries/ We are one of the leading manufacturers, traders and service providers of Water Jet Cutting, Sheet Metal Shearing, Folding and Rolling,
More informationDesigning Precast Concrete School Buildings
Designing Precast Concrete School Buildings 1 This program is registered with CPCI for continuing professional education. CPCI s continuing-education program emphasizes on learning for architects, engineers
More informationClassic Connection Conundrums
Classic Connection Conundrums Commonly Overlooked Wood Engineering Design Issues Michelle Kam-Biron, P.E., S.E. S.E.C.B Senior Director, Education American Wood Council COURSE DESCRIPTION The American
More informationGable Roof Pavilions
Wood Pavilions Gable Roof Pavilions Pitch & Taper Framing Wood PTC Beams Tube Steel Columns Prime-painted Steel Wood Columns Stain Multiple s Available 4:12 Pitch Truss Framing Wood Trusses Tube Steel
More informationSupervisor s Checklist (Handling/Installation/Inspection of Roof Framing)
Supervisor s Checklist (Handling/Installation/Inspection of Roof Framing) Development Regulations 2008 Notice pursuant to Regulation 74 of the Development Act 1993 Development Application Number: Address
More informationAbout Everite and Nutec 2. Nutec Bigsix Tiles : Compsition and Product Quality 4. Installation Guide 5. Support Structure 6
c o n t e n t s About Everite and Nutec 2 Nutec Bigsix Tiles : Compsition and Product Quality 4 Installation Guide 5 Support Structure 6 Light Weight Steel Sections 4 Timber Supports 5 Mitre Details 5
More informationMASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 08 - OPENINGS
SECTION 081433 - STILE AND RAIL WOOD DOORS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Exterior stile and rail wood doors and sidelites. 2. Interior stile and rail wood doors. 3. Interior fire-rated,
More informationTotal Precast Concrete Structures
Total Precast Concrete Structures 1 This program is registered with CPCI for continuing professional education. CPCI s continuing-education program emphasizes on learning for architects, engineers and
More informationSECTION MANUFACTURED CASEWORK
1 GENERAL 1.1 SECTION INCLUDES SECTION 12300 MANUFACTURED CASEWORK A. Work required to complete the manufactured casework indicated by the Contract Documents, and the items necessary for its proper installation.
More informationDesigner s NOTEBOOK WINDOW PANELS
Designer s NOTEBOOK WINDOW PANELS PCI s Architectural Precast Concrete Services Committee explains the finer points of designing architectural panels with window openings Window Panels Offer Many Options
More informationAIChE Baton Rouge Fall / 2017 Seminar
AIChE Baton Rouge Fall / 2017 Seminar SCADA/DCS/PLCs & Separation Technology Seminar + Engineering Ethics This presentation will compare and contrast the DCS vs PLC/SCADA platforms as they relate to operational
More informationMINDFUL TECHNOLOGIES TO DESIGN OUR BUILT FUTURE
JUNE 11 8AM 10PM KNOXVILLE, IL SATURDAY, JUNE 11: SUNDAY, JUNE 12: (OPTIONAL) 8:00 8:45 Check-in & Tours 9:00 10:00 Rick Collins- Owner, Trillium Dell Timberworks: AIA Accredited- Timber Framing: Applications
More information(SIP) Structural Insulated Panel Laminating Technology, Training & Special Tools Packages
(SIP) Structural Insulated Panel Laminating Technology, Training & Special Tools Packages Marketing Kit Education & Training Panel Drawings On-Site Construction Tools Midwest Automation, a leading manufacturer
More informationATOMIC. ASM Panel Brochure ARCHITECTURAL SHEET METAL,
ATOMIC ARCHITECTURAL SHEET METAL, INC. ASM Panel Brochure 3207 Labore Road Vadnais Heights, MN 55110 Phone: 651-646-1706 Fax: 651-646-1684 atomic@atomicsheetmetal.com 1 of 1Page 0 of 0 ARCHITECTURAL SHEET
More informationWhy BIM? VASQUEZ MARSHALL ARCHITECTS
Why BIM? VASQUEZ MARSHALL ARCHITECTS Agenda Introductions Using BIM Software For Drawing Production Using BIM Software For Constructability Review Benefits Of BIM Getting Started BIM Experts Michael Smith
More informationW-H 1000 SYSTEM Wall cladding. Metal product
W-H 1000 SYSTEM Wall cladding Metal product :::: 3 WALL CLADDING SYSTEM W-H 1000 APPLICATION AREA Acoustic and architectural design elements for market segments such as office, education, transportation
More informationCarry out structural carcassing operations
Reference : K/504/7882 Level : Level 2 Credit Value : 16 Carry out structural carcassing operations Guided Learning Hours : 128 Grading Type : Graded Aim : The aim of this unit is to provide the learner
More informationNon-Rated STC43-46 (SCL5-NR STC 43-46) Bonded SCL Core, 5-Ply Construction
Non-Rated STC43-46 (SCL5-NR STC 43-46) Bonded SCL Core, 5-Ply Construction Single Swing Pair or Double Egress Core Type & Standards Structural Composite Lumber: (38 lb/ft 3 ) Maximum Sizes 4 0 x 8 0 N/A
More informationSECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
More informationThe Riga Declaration on e-skills A call to action on digital skills and job creation in Europe
The Riga Declaration on e-skills A call to action on digital skills and job creation in Europe Riga, 13 March 2015: Representatives from governments, industry, academia, NGOs, and other key stakeholders
More information31st Annual Notre Dame Student Design-Build Commemorating a Decade of Collaboration in Masonry
31ST ANNUAL NOTRE DAME STUDENT BUILD DAY - SOUTH BEND, IN 31st Annual Notre Dame Student Design-Build Commemorating a Decade of Collaboration in Masonry #NDDesignBuild2017 October 12 th 2017 The weather
More informationHeavy Timber Trusses. Workshop: Exposed Connections in Timber Trusses and Structures: Designing for Beauty and Function
Heavy Timber Trusses Workshop: Exposed Connections in Timber Trusses and Structures: Designing for Beauty and Function Presented by RL. Ben Brungraber, PhD, PE Fire Tower Engineered Timber Disclaimer:
More informationDIVISION 6 WOOD, PLASTICS AND COMPOSITES
DIVISION 6 WOOD, PLASTICS AND COMPOSITES PART 1 GENERAL 1.01 SECTION INCLUDES SECTION 06 1000 ROUGH CARPENTRY A. Rough opening framing for doors, windows, and roof openings. B. Roofing nailers. C. Preservative
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ASPHALT SHINGLES REPORT HOLDER: CERTAINTEED CORPORATION
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1389 Reissued 01/2018 This report is subject to renewal 01/2019. DIVISION: 07 00
More informationA F LCON PANEL PRODUCTS LTD
FA LCON PANEL PRODUCTS LTD Introduction to Strebord $ Strebord 35+, 38+, 44, 54 & Superpan Materials are purpose made, multi-layer particle boards designed specifically for use in the manufacture of high
More informationAP ART HISTORY 2007 SCORING GUIDELINES
AP ART HISTORY 2007 SCORING GUIDELINES Question 9 9. Throughout history, technological developments have enabled artists and architects to express ideas in new ways. Choose and fully identify two works
More informationProduct Guide Specification
VT Industries, Inc. April 2014 890 Central Court New Albany, Indiana 47150 Toll Free (800) 626-6271 Fax (712) 368-4111 Website www.vtindustries.com E-mail door_info@vtindustries.com Product Guide Specification
More informationRAPID CONSTRUCTION-INOVATIVE APPROCH OF PREFABRICATED CONSTRUCTION
RAPID CONSTRUCTION-INOVATIVE APPROCH OF PREFABRICATED CONSTRUCTION Krushil K. Ponkiya 1, Dhyey K. Shah 2, Rushabh A. Shah 3 PG. Student, SNPIT & RC, Umrakh, Gujarat, India 1 PG. Student SNPIT & RC, Umrakh,
More informationMoreSun Custom Woodworking, Inc. Portfolio of Selected Work
MoreSun Custom Woodworking, Inc. Portfolio of Selected Work Craftsmen Dedicated To Creating Structural Timber Frames And Custom Woodwork The MoreSun Story It began in 2002 as a simple one-man show when
More informationCasalingo Estates Classic Setting for a Privileged Lifestyle in Redlands by Al Lewis
Estates Classic Setting for a Privileged Lifestyle in Redlands by Al Lewis Brochure Final Design and Composition for Client Approval Single Sheet Signature Design User Friendly Form with Advertising Tie-in
More informationPlywood. structural, building & decorative. Performance with quality. veneers P laminates P plywood P flooring P timber P trade
Plywood structural, building & decorative Performance with quality veneers P laminates P plywood P flooring P timber P trade Performance with quality Amerind is a leading Australian distributor of premium
More informationLocal Construction Techniques Using Digital-Fabrication with Local Wood
UIA 2017 Seoul World Architects Congress O-0426 Local Construction Techniques Using Digital-Fabrication with Local Wood Koki Akiyoshi *1, Yoshiyuki Kawazoe 2 1 Doctoral Student, The University of Tokyo,
More informationTOTAL PRECAST. A sensible way to build
TOTAL PRECAST Since 1976, BPDL has been an industry-leading partner dedicated to ensuring the end-to-end success of large-scale precast concrete-based projects throughout North America. Thanks to the soundness
More informationSolid And Laminated Wood Bending
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with solid and laminated
More informationCOMPANYPROFILE. Company overview p. 2. Mission and vision p. 6. Our facilities p. 8. Our values p. 16. What we do p. 28. Our service p.
COMPANYPROFILE COMPANYPROFILE Company overview p. 2 Mission and vision p. 6 Our facilities p. 8 Our values p. 16 What we do p. 28 Our service p. 32 100% American ceramic tile company. WHO WE ARE Landmark
More informationMaking Building Easy
Making Building Easy Discover the of Precast Choosing precast concrete during the design build process means your project has The Advantage. Precast is widely known for its high product quality and aesthetic
More informationPRODUCT INFORMATION
PRODUCT INFORMATION ABOUT PRODUCT DESCRIPTION Vitranamel is a prefabricated steel cassette panel system featuring a vitreous enamel finish which is applied using a special static powder enamelling process
More informationAspen Art Museum Creating Innovative Wood Structure
Aspen Art Museum Creating Innovative Wood Structure Tallinn Wood Architecture Conference November 25-26, 2015 Aspen Art Museum Wood Space Frame THE PLAYERS OUTLINE THE BUILDING CONCEPT THE ARCHITECT S
More informationINSTALLATION SHOP DRAWINGS FOR MINNEAPOLIS, MN
MINNEAPOLIS, MN 2-0- 2-- General Notes Abbreviations Deviations from Architectural Specifications Deviations from Architectural Drawings ALUM. = ALUMINUM B.O. = BY OTHERS CONT. = CONTINUOUS. = CLEARANCE
More informationLEVERAGING VIRTUAL REALITY Visualizing Risk & Opportunity Mike Prefling & Greg Martin Autodesk Join the conversation #AU2016
LEVERAGING VIRTUAL REALITY Visualizing Risk & Opportunity Mike Prefling & Greg Martin Join the conversation #AU2016 To over use the not used often enough baseball analogy, we don t even think we are in
More informationR-SHIELD WEATHER RESISTIVE BARRIERS CONSTRUCTION MANUAL. Foam-Control
Foam-Control R-SHIELD WEATHER RESISTIVE BARRIERS CONSTRUCTION MANUAL Note: Information deemed reliable at time of printing. Please visit www.foam-control.com for the latest information. WEATHER RESISTIVE
More information