Volume 16, Issue 8 August, 2007 August Demo By Vera Pfifferling
|
|
- Alvin Joseph
- 5 years ago
- Views:
Transcription
1 Volume 16, Issue 8 August, 2007 August Demo By Vera Pfifferling T he demo last month was Turning a Sphere by Beau Bunn. He demonstrated how to begin with the wood between centers, turning a cylinder, marking the blank, and then creating the rough sphere. From there he demonstrated how to crate the jam chuck needed to hold the sphere while turning it. He chooses a piece of green wood that is larger than the sphere he was turning in order to accommodate the size. He turned out the center; bowl like, to accept the rough sphere until it seated well enough to be held safely. Once the sphere was half turned he rotated the semi-turned sphere to turn the other side, adjusting the jam chuck to fit. Once both halves were turned he sanded it to a smooth finish by sanding half, rotating 90 degrees, sanding, then rotating 90 degrees again. Beau said that It is a challenging piece to turn but once it is learned the results can be spectacular. And of course, Beau did a spectacular job!
2 Page 2 Volume 16, Issue 7 WGNC Officers President Frank Penta Vice President Alan Leland Secretary Vera Pfifferling Treasurer Andy Gunning Program Coordinator Steve Payne Librarian Chet Nedwidek, Jr Special Projects Al Basham President s Message e met in our new W facilities at 516 Brickhaven Road for the first time last month. The space provided for us by the NC Craft Center worked well. Beau Bunn did an excellent demonstration turning a sphere. The new camera mount that Alan Leland build worked very quilt well under the guidance of Bob Vern. I am still looking for volunteers to help at the upcoming Symposium in Greensboro, Oct 5-7. Please let Andy Gunning know if you would be available to help at the Symposium. Our guild is responsible for the set up and maintenance of one of the demonstration rooms. We need help, setting up the room, operating the camera for each demonstrator, cleaning up after each demonstration, and finally removing all equipment and cleaning the room at the completion of the Symposium. I would like to spread the work among as volunteers as possible so that everyone will have plenty of time to enjoy the Symposium. Thanks, Frank VP s Message ord is that W Beau Bunn did an excellent demonstration last month on turning large spheres. Not only did he make it hard on himself by turning a Manzaneta root burl sphere, but there was the new meeting place to deal with and to top it off we were not sure if there was going to be 220 power available to run the Chapters Oneway Lathe. I heard all went well and I would like to thank Beau for sharing his talent with us. It was also reported to me that the video was the best ever. So, thanks to Bob Verne for taking over the video and doing an excellent job. It is time to think about our chapter s board of directors. We would appreciate any volunteers and nominations for new board members. If you are interested in taking a more active roll in the chapter, please let me know ASAP. As our chapter relies on the participation of its members to be successful, we are in search of new and fresh ides and most importantly new participants to fill several board positions. Remember the chapter is only as strong as the members that are willing to share their time, expertise and skills to make it a fun and enjoyable organization. I will not be at this month s meeting, so Frank can pass the names of the potential board members on to me. I will be at the John C. Campbell Folk School this month teaching a fundamentals class and next month I will miss the monthly meeting as I will be assisting Frank Penta in his platter class. So please step up and volunteer to help out of better yet take an active roll in running the Chapter. My thanks to out to all who help out at the meetings and at our special events. This month s demonstrators will be Bob Reuss and Steve Driggers. They will present a short slide presentation on the class they attended at Arrowmont, under the instruction of Christian Burchard. After the slide presentation, they turn a piece of Madrone and all will be amazed as it changes shape and moves. Madrone is a very unstable wood. This will be a meeting that you will not miss. While at the AAW Symposium in Portland I was videographer for Christian Burchard s rotation and was amazed at how quickly the Madrone piece he was turning changed shape. Madrone is a tricky wood to work with, so the techniques that Bob & Steve will be sharing with us will be most enlightening. Thanks, Alan
3 Page 3 Volume 16, Issue 8 A week at Arrowmont with Christian Burchard teve Driggers and Bob Reuss spent a week in June at the Arrowmont School of Arts and Crafts in Gatlinburg, Tennessee studying thin wall green wood turning with Christian S Burchard. Christian lives in Oregon, studied furniture making in Germany and attended art school in the US. He has been a professional wood turner for many years. His work is in several major collections and a number of art museums. He is best known for his work with madrone burl including basket forms and ball forms. In recent years he has also been doing bowls and wall hangings from thin slabs of madrone allowed to dry then bleached. Madrone is native to the Pacific Northwest and the burl grows under ground with the roots around and sometimes extending from it. The burls can be as large as a Volkswagen. Christian Burchard and Bob Doop (Custom turning smocks by Bob s wife) Christian demonstrating spheres There were ten students from all over the United States. Christian was assisted by Bob Doop who is an excellent turner and a professional yacht captain from Washington State. Together they provided an informative and entertaining week of demonstrations, slide shows, design discussions and personal assistance. Madrone Baskets by Christian Burchard and Bob Reuss End of Class Critique by Christian (larger one in the right rear) Madrone has no orderly internal structure so pieces are turned thin, wet and fast then repeatedly microwaved to get amazing deformations. Christian likes to put a series of circumferential grooves on the pieces starting close together at the top and widening as you go down. They are turned with a gourd bottom (no foot). He sometimes sandblasts or bleaches the finished pieces and usually uses a propane torch to get a dark rim on the top prior to using an oil finish.
4 Page 4 Volume 16, Issue 8 North Carolina Woodturning Symposium Board 2007 NC Woodturning Symposium Board of Directors meet to finalize plans for the upcoming Symposium in Greensboro, October 5-7, Pictured beginning on the left: Bill Williams, North Carolina Woodturners Andy Gunning, NC Woodturners Guild Tom Masters, Charlotte Woodturners Bob Gunther, Mountain Woodturners Jim Smith/Barry Russell, Southern Pidemont Woodturners Gary Bills, Mountain Woodturners Terry Waldron, Wilmington Area Woodturners Assoc. The picture was taken by Frank Penta, NC Woodturners Guild. T his board has been working hard for the last year to make this symposium one of the best ever and it looks like they are going to do just that. The lineup of national and regional demonstrators and the list of equipment and wood suppliers who have booths at the Symposium are impressive. For more information and a registration form go to
5 Page 5 Volume 16, Issue 8 Chet s Library Notes and Book Review H i Folks, The Library cabinet at the temporary location building has been restocked and we are back in business. Please bring borrowed items back! However, because of the cabinet's location relative to the presentation area, (it s down the corridor about 30 feet, then to your left) the library will only be open 1/2 hour before the meeting starts, and 1/2 hour after the meeting ends. It will not be open during the break. Intermediate Woodturning Projects, The Best of Woodturning Magazine The addition this month is from The Best of Woodturning Magazine and is titled, Intermediate Woodturning Projects. It includes 29 super articles. One that caught my eye is about creating decorative Rhyton vases which are small and light enough to serve as Christmas tree ornaments. But Chet, I thought you said it was food for thought! Other articles include: Metal Marvels (how to include metal in a platter); Hidden Gem (a jewelry box with a hidden compartment); Time Zone (a futuristic mantel clock); The Ringmaster (how to make a classy segmented bowl); Table from a Trunk (How to turn a table support from a tree trunk); Latch on Lattice Work (How to incorporate lattice work in your turned pieces); Turning a Giraffe Spoon (long necked spoon to reach the bottom of those tall jars); and more. Chet Nedwidek, Librarian Calendar of Events and Demos (NC meetings are held every 2nd Thursday of each month from 7:00 pm to 9:00 pm at 516 Brickhaven Drive in Raleigh.) CLUB MEETINGS AND DEMOS August 9 Bob Reuss & Steve Driggers - Turning Madrone OTHER EVENTS August 25 Lazy Daze Arts & Crafts Festival Cary, North Carolina October 5-7 North Carolina Woodturning Symposium Greensboro, North Carolina Sept Georgia Association of Woodturners Unicoi State Park and Lodge near (GAW) 13th Annual Symposium Helen, GA
6 Page 6 Volume 16, Issue 8 Club Sponsors Australian Burls.com East Wake Hardwoods Klingspor s Woodworking Shop NC Wood Nice Figures Wood and Lumber Packard Woodworks Woodcraft WGNC Website address is Your user name is the first letter of your first name and your last name in uppercase. Your ID is the same. Please change your ID and review your personal data for accuracy and add your AAW membership number. Vera Pfifferling 300 Silver Cedar Court Chapel Hill, North Carolina vera@edtsi.com We re on the Web!
Volume 15, Issue 2 February, 2006 January Demo By Bob Janka
Volume 15, Issue 2 February, 2006 January Demo By Bob Janka ith Steve and Alan s help Frank showed us how to make Celtic Knots at W our January meeting. This variation on the hollow sphere ornament is
More informationThe Triangle Woodturner
The Triangle Woodturners of North Carolina The Triangle Woodturner Volume 11, Issue 4 April, 2002 Don Baker, Cherry/Walnut Inside this issue: Barry Wilder, Walnut 12 X 5 Frank Penta Multi-Axis Turning
More informationTurn to the News. Inside this issue: Highlights
A monthly publication of the Pre sque Isle Wo odturners Turn to the News Volume 1 Issue 11 November 2016 Highlights Elections Inside this issue: Presidents Message 1 FIY 2 Library News 3 Activity Calendar
More informationCuts and Scrapes. that s different and. Sat. Oct. 17th. What can I make. unique?
T R I - S T A T E W O O D T U R N E R S Cuts and Scrapes WWW.TRISTATEWOODTURNERS.COM O C T O B E R 2 0 1 5 N E W S L E T T E R P R E S I D E N T : Josh Bowman (423)280-0954 jsbowman@bellsouth.net VP: Doug
More informationAugust Program: Warren Carpenter
Alabama Woodturners Association August 2014 Coming Events August Warren Carpenter September Joe Ruminski October TBA November Round Robin December Party January?? Officers of AWA President-Richard Serviss
More informationCHAPTER NEWSLETTER 2014 Issue 10 PROMOTING INTEREST IN WOOD TURNING
CHAPTER NEWSLETTER 2014 Issue 10 Chapter Newsetter October 2014 PROMOTING INTEREST IN WOOD TURNING Turning a Bowl from a Log with Drue Hogland The October Demo featured a start to finish review on how
More informationChips & Bits. Peace River Woodturners. Meeting Announcements. Larry Fox at the lathe. Larry Fox Demo
Chips & Bits Peace River Woodturners Volume 5 Issue 5 A chapter of the American Association of Woodturners May 2012 Contact Us President: Jim Ellsworth: 941-505-1016 First Vice President: Norm Desjardins:
More informationBetween Turns. July Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners
Between Turns C O N T A C T U S : President: Michigan Association of Woodturners A chapter of the American Association of Woodturners Tom Mogford 810-629-6176 Vice President: V O L U M E 2 3, I S S U E
More informationBetween Turns. August Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners
Between Turns C O N T A C T U S : President: Tom Mogford 810-629-6176 Vice President: Bill Magee 734-981-6117 Michigan Association of Woodturners A chapter of the American Association of Woodturners V
More informationBetween Turns. September Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners
Between Turns C O N T A C T U S : President: Tom Mogford 810-629-6176 Vice President: Bill Magee 734-981-6117 Michigan Association of Woodturners A chapter of the American Association of Woodturners V
More informationJuly 19. Newsletter of the Treasure Coast Woodturning Guild June In this issue:
1 Treasure Coast Woodturners 7/10/2013 An Affiliate Chapter of the American Association of Woodturners In this issue: Newsletter of the Treasure Coast Woodturning Guild June 2013 Letter from the President
More informationBuckeye Woodworkers and Woodturners
Buckeye Woodworkers and Woodturners The Official Newsletter of the Buckeye Woodworkers and Woodturners Your Officers President Bruce Lance 330-633-9622 Vice President Gary Lansinger 330-645-0129 Secretary
More informationOffset turning female form
A Member of the American Association of Woodturners November 2016 The monthly newsletter of the Inland Woodturners Offeset Turning 1 Officers 2 Offset turning female form Written by Larry Cooper Photos
More informationThe Triangle Woodturner
The Triangle Woodturners of North Carolina The Triangle Woodturner Volume 11, Issue 9 September, 2002 Inside this issue: TWNC Information 2 Gallery 5 Bruce Hoover August Demonstrator 3 Woodturning Calendar
More informationPeace River Woodturners
Peace River Woodturners Volume 8 Issue 9 A chapter of the American Association of Woodturners September 2015 Norm s Sample bowl for his demonstration. In This Issue Norm explaining his demonstration of
More informationYour continuing efforts to the timely returning of resources are appreciated. Regards, Dave Hawley FRW Librarian. Did You Know?
Dedicated To Doing Good Turns A CHAPTER OF THE AMERICAN ASSOCIATION OF WOODTURNERS 1992 FRONT RANGE WOODTURNERS September, 2013, Volume 13 - Number 09 Inside this Issue Inside this Issue... 1 Upcoming
More informationChips & Bits. Peace River Woodturners. A chapter of the American Association of Woodturners. Meeting Announcements
Chips & Bits Peace River Woodturners Volume 6 Issue 11 A chapter of the American Association of Woodturners Contact Us President: Meeting Announcements November 2013 Avelino Samuel Jim Ellsworth: 941-505-1016
More informationTHE WOODTURNER. Sammy Thomason. Basket Bowls
Golden Triangle Woodturners Club Denton Texas THE WOODTURNER www.goldentrianglewoodturners.org MEETING: 7:00 PM FIRST MONDAY OF THE MONTH Center for the Visual Arts Sammy Thomason Basket Bowls My first
More informationSmoky Mountains Woodturners NEWSLETTER
Smoky Mountains Woodturners NEWSLETTER Wood Draw Donations Many members brought wood for our annual auction. Proceeds totaled $1790, exceeding last year by $100. Scholarship Winners March Wood Auction
More informationNorth Carolina WOODTURNER
North Carolina WOODTURNER Journal of the North Carolina Woodturners Association A Chapter of the American Association of Woodturners www.ncwoodturners.com October 2010 Volume 20, No. 10 Inside this issue:
More informationBetween Turns. May Stump The Pro... Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners
Between Turns C O N T A C T U S : President: Michigan Association of Woodturners A chapter of the American Association of Woodturners Tom Mogford 810-629-6176 Vice President: V O L U M E 2 2, I S S U E
More informationWood Chips LOCAL AAW CHAPTER
August 2008 Wood Chips www.kcwoodturners.org LOCAL AAW CHAPTER Officers President: Richard Davis 913-424-5813 president@ kcwoodturners.org Vice President: Jim Reynolds 913-441-0997 vp@kcwoodturners.org
More informationJam Chucks and Holding devices
A Member of the American Association of Woodturners October 2016 The monthly newsletter of the Inland Woodturners Square Bowl 1 Officers 2 Jam Chucks and Holding devices Written by Larry Cooper Photos
More informationBetween Centers Club established
Newsletter of Ozark Woodturners Between Centers Club established 1995 http://www.ozarkwoodturners.com 2016 Club Officers President: Ron Ufkes 870-507-0007 Vice Pres.: Kenneth Higgins 870-405-7283 Treasurer:
More informationOne Good Turn. Coulee Region Woodturners. Chapter of the American Association of WoodTurners.
One Good Turn Coulee Region Woodturners Chapter of the American Association of WoodTurners Www.crwoodturner.com A big thank you to Clyde Cassell for hosting our meeting in August. What a wonderful location
More informationWOODWORDS ON THE BRANDYWINE
WOODWORDS ON THE BRANDYWINE www.delawarewoodworkers.org Webmaster: Richard Dell Woodworkers Guild Officers for 2015 November 2015: Cabinet Scraper Sharpening demo President: George Hoffman VP: Jim Stevens
More informationBuckeye Woodworkers and Woodturners
Buckeye Woodworkers and Woodturners The Official Newsletter of the Buckeye Woodworkers and Woodturners Your Officers President Fred Totts 330-325-7517 Vice President Bruce Lance 330-633-9622 Secretary
More informationBetween Turns. Sharpening..In s & Outs. New Mentoring Update. Michigan Association of Woodturers A chapter of the American Association of Woodturners
C O N T A C T U S President: Tom Mogford 810-629-6176 Vice President: Pete Buccelato Between Turns Michigan Association of Woodturers A chapter of the American Association of Woodturners V O L U M E 2
More informationhttp://flinthillswoodturners.org Projects turned on the lathe make wonderful Christmas gifts. At our October meeting, Tom Shields will demonstrate the steps he takes in creating an inside out ornament.
More informationPresidents Message. Newsletter of the Treasure Coast Woodturning Guild. Hi Everyone,
An Affiliate Chapter of the American Association of Woodturners Newsletter of the Treasure Coast Woodturning Guild Hi Everyone, Presidents Message I got through my little operation without too much inconvenient
More informationJanuary Turn-a-thon. The new year has started for the inland woodturners and rather than starting with a demo, we had a turn-a-thon.
A Member of the American Association of Woodturners January 2013 Inside this issue: Turn-a-thon 1 Officers 2 Monthly Challenge, Wood Raffle, Show and Tell Bowl from a Board (cont.) 2 Woodturning Schools
More informationMarch 2, 2018 Demo. Nick Agar. Turning a Lidded Bowl with Finial. Join us at the Bemis School of Art
March 2018 March 2, 2018 Demo Nick Agar Turning a Lidded Bowl with Finial Join us at the Bemis School of Art PPW dues are $30/year. Dues are used for guest demonstrators, purchase and maintain club equipment,
More informationFinger Lakes Woodturners A Chapter of The American Association of Woodturners
Finger Lakes Woodturners A Chapter of The American Association of Woodturners Presidential Mumblings March 2018 Our next meeting is on Thursday April 19, beginning at 6:00pm with a show and share of members
More informationNorth Alabama Woodturners Boaz, Alabama
North Alabama Woodturners Boaz, Alabama Hosting Nationally Known Turner John Lucas John is recognized nationally as a woodturner, artist, author and photographer. Come and spend the day and leave a better
More informationProviding an environment that fosters the art and craft of woodturning A Publication of the Peace River Woodturners
April 2016 This n That Show & Tell Al Stirt Gavel Turning Ray Fenton Dizzy Bowl Providing an environment that fosters the art and craft of woodturning A Publication of the Peace River Woodturners Chips
More informationChips & Bits. Peace River Woodturners. Meeting Annncements. Frank Bauer s Spin Top turning demonstration
Chips & Bits Peace River Woodturners Volume 8 Issue 10 A chapter of the American Association of Woodturners October 2015 President: Contact Us Norman Desjardins: 941-613-0245 Vice President: Bob Moran:
More informationthe 360 Volume 25 Issue 1 January 2017 WCWT Christmas Party 2016
Volume 25 Issue 1 January 2017 All the News That Will Fit On the Lathe the 360 A Message From Mark Hubl, Your President Well what a party! Where s my hat? Has anyone seen my hat but seriously I hope that
More informationBetween Turns. April 2012 MAW Meeting. Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners
Between Turns C O N T A C T U S : President: Tom Mogford 810-629-6176 Vice President: Michigan Association of Woodturners A chapter of the American Association of Woodturners V O L U M E 2 4, I S S U E
More informationThe Triangle Woodturner
The Triangle Woodturners of North Carolina The Triangle Woodturner Volume 11, Issue 8 August, 2002 Anna Vermeulen, age 10, found this piece of a broken bowl in her Granddaddy's scrap pile and turned it
More informationAugust Newsletter. * * * * * * * * * * * * * * * NEXT MEETING: FUTURE DEMONSTRATORS:
www.ptwoodturners.org Newsletter August 2007 www.woodturner.org NEXT MEETING: August 7 th Dennis Ross Turning Spheres FUTURE DEMONSTRATORS: September 4 th Lan Brady Making Your Own Tools October 2 nd Used
More informationAugust 6, The demonstrator will be Steve Cook.
www.brasstownwoodturners.org Next meeting is: Terrence Powell BWG News Editor terrence.powell1963@gmail.com August 6, 2016. The demonstrator will be Steve Cook. $10 fee at the door to all attending Steve
More informationTHE WOODTURNER. January John Holderman. Skew Demo
Golden Triangle Woodturners Club Denton Texas January 2015 John Holderman Skew Demo My father worked in a lumber yard and always helped friends build their houses, fix barns and any odd job that dealt
More informationNEWSLETTER CENTRAL OHIO WOODTURNERS
! 1 OF 5! NEXT MEETING November 14, 2017 Swap and Share 6:00 Meeting 7:00 Holy Spirit Church 4401 E Broad St NOVEMBER GUEST THOMAS WIRSING DECEMBER GUEST PETE WADE Turning threads NEWSLETTER CENTRAL OHIO
More informationFinger Lakes Woodturners A Chapter of The American Association of Woodturners
Finger Lakes Woodturners A Chapter of The American Association of Woodturners Presidential Mumblings October 2017 This month we will be hosting Tom Wirsing, a National Turner. This is a joint effort with
More informationTristan s Corner: Hopefully everyone stayed dry last month! I think we might get some drier weather soon.
SOUTHCOAST WOODTURNERS NEWSLETTER News of the South Coast Woodturner s Club A Chapter of the American Association of Woodturner s SouthCoastWoodturners (www.southcoastwoodturners.com) April 8, 2017 Meeting
More informationSeptember 2015 In this issue: Sept. Meeting/Program...1 Presidents Message...2
http://flinthillswoodturners.org September 2015 Ready for a Challenge? For our September 5th meeting, three FHW members will demonstrate a variety of skill building projects using basic tools and turned
More informationBetween Turns. March Burning Demonstration... Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners
Between Turns C O N T A C T U S : President: Tom Mogford 810-629-6176 Vice President: Michigan Association of Woodturners A chapter of the American Association of Woodturners V O L U M E 2 2, I S S U E
More informationAAW Insurance Update. Last call for Dues
Windy City Woodturners Newsletter February 2013 Volume 14 Issue 2 Club Officers President Don Johnston 708-482-7628 donsuej@yahoo.com Vice President Nick Page 847-931-9770 nicklpage@sbcglobal.net Treasurer
More informationNorthwest Woodworkers Association
A forum for woodworkers of all skill levels to share their common interests Northwest Woodworkers Association January 2013 http://www.nwwoodworkers.org Next Meeting: Mega Show-and -Tell And Attendance
More informationLichtenberg Pyrography
CALGARY WOODTURNERS GUILD NEWSLETTER May 2, 2017 Issue 71, May 2017 Lichtenberg Pyrography The Last Meeting Pages 2-4 Presentations: Lichtenberg Pyrography Page 2 Bert's Presentation See Seperate Attachment
More informationA Member of the American Association of Woodturners
A Member of the American Association of Woodturners April 2016 The monthly newsletter of the Inland Woodturners Square Bowl 1 Officers 2 Candle Stick Holder Written by Larry Cooper Photos by Larry Cooper
More informationTHE WOODTURNER. Jon Lindgren Hollow Spheres
Golden Triangle Woodturners Club Denton Texas THE WOODTURNER www.goldentrianglewoodturners.org MEETING: 7:00 PM FIRST MONDAY OF THE MONTH Center for the Visual Arts Jon Lindgren Hollow Spheres I have been
More informationNorth Carolina WOODTURNER
North Carolina WOODTURNER Journal of the North Carolina Woodturners Association A Chapter of the American Association of Woodturners www.ncwoodturners.com July 2010 Volume 20, No. 7 Inside this issue:
More informationChristmas Party. December The monthly newsletter of the Inland Woodturners
A Member of the American Association of Woodturners December 2013 Christmas Party 1 Officers 2 Monthly Challenge, Wood Raffle, 2 Instant Gallery 3 Woodturning Schools 4 Upcoming Events 5 Festivities 6
More informationDemonstration Bob Rosand October 20, 2007 by Bob Gunther
Demonstration Bob Rosand October 20, 2007 by Bob Gunther Overview: Bob Rosand has been a woodturner for more than 25 years. He teaches, demonstrates and writes articles on many topics pertaining to woodturning.
More informationWOODTURNERS OF ST. LOUIS
WOODTURNERS OF ST. LOUIS A Chapter of the American Association of Woodturners February 2006 WOODTURNERS OF ST. LOUIS AT THE COLLINSVILLE WOODWORKING SHOW Last weekend, if you had the chance to make it
More informationThe Turning Point The newsletter of the Siouxland Woodturners Chapter of the American Association of Woodturners
The Turning Point The newsletter of the Siouxland Woodturners Chapter of the American Association of Woodturners March 2012 In this issue News Items............... Page 1 Upcoming Meeting Notes.... Page
More informationThe combination gave Rocky Mountain Woodturners a good understanding of finishes to use in their art / utility pieces. April Meeting!
Upcoming meetings April 2007- Trent Bosch & Allen Jensen Newsletter April 2007 Rocky Mountain Woodturners A Chapter of the American Association of Woodturners Next Meeting Loveland Woodcraft. April 5,
More informationThe Wood Spinner. You Never Know What will Show up at show & tell! this issue Presidents Corner P.2 Meeting Minutes P.3 Your Club P.
v The Wood Spinner You Never Know What will Show up at show & tell! this issue Presidents Corner P.2 Meeting Minutes P.3 Your Club P. 5 Visit to Kirk McCauley s Shop P.6 Skills Day P. 7 Show & Tell P.9
More informationJune Greatest auction in years, where were you?
June 2006 Greatest auction in years, where were you? By David Floyd & Jerry Schaible By all accounts the annual BWWT Auction was a great success. The final figures were not yet available, but best estimates
More informationThe Turning Point The newsletter of the Siouxland Woodturners Chapter of the American Association of Woodturners
The Turning Point The newsletter of the Siouxland Woodturners Chapter of the American Association of Woodturners February 2012 In this issue News Items............... Page 1 Upcoming Meeting Notes....
More informationSeptember 2017 Chainsaw Superhero Providing an environment that fosters the art and craft of woodturning A Publication of the Peace River Woodturners
September 2017 Chainsaw Superhero Providing an environment that fosters the art and craft of woodturning A Publication of the Peace River Woodturners Chips & Bits September 2017 After all is said and done
More informationEchoes from the BAT. Inside this month s BAT Cave. Details inside. Bill Henry Kicks off October Meeting. November 50/50 Raffle One Lucky Winner
Echoes from the BAT November 11, 2009 Volume 4, Issue 11 Inside this month s BAT Cave Bill Henry Kicks off October Meeting 2009 Officers President Bill Henry Vice President Keith Holt November 50/50 Raffle
More informationAlabama Woodturners Association
Alabama Woodturners Association April 2019 A member of the American Association of Woodturners Meeting location: Homewood Senior Center, 816 Oak Grove Rd., Homewood, AL 35209 Meeting time: The second Saturday
More informationWoodworkers Guild of Southwestern Michigan April 2014
Woodworkers Guild of Southwestern Michigan http://www.woodguild.org April 2014 Next Meeting April 8, 2014 7:00pm Al Collison s Shop at 10292 Douglas Ave. Take Douglas North to Cooper, it is 2 ½ miles North
More informationThe Tennessee Turner. Tennessee Association of Woodturners
Tennessee Association of Woodturners June 2009 Volume XXII, Issue 6 Inside This Issue: President s message 1 June 2 Meeting Info 2 Sawdust Trail June 5, 6 2 June 20 Saturday Turn In 2 2009 Schedule 2 Minutes
More informationWoodworker s Journal sent four identical blocks of butternut, 6" x 4" x 12", to four turners of varying degrees of expertise.
By Steve Blenk here do turners get their ideas? How do they put them into practice? Conversations about what inspires those whose woodworking focuses on woodturning tend to either begin or end with one
More informationA Member of the American Association of Woodturners. Inside this issue: Turning Miniatures
A Member of the American Association of Woodturners September 2012 The monthly newsletter of the Inland Woodturners Inside this issue: Turning Miniatures Demo 1 Officers 2 Monthly Challenge, Wood Raffle,
More informationThe Monthly Newsletter of the Windy City Woodturners
The Monthly Newsletter of the Windy City Woodturners In This Issue: Message from Jason Clark January Meeting Information Christmas Party Recap Message from Jason Clark(cont) AAW Information Calendar of
More informationMay 2013 Embellishment Erskine Academy, 309 Windsor Road (route 32), South China, Maine Show & Tell photos and For Sale table at 6:30 PM
May 2013 Embellishment Mac Ray will demonstrate various embellishment techniques to decorate your work, including using Gesso, pyrography, and much, much more! Erskine Academy, 309 Windsor Road (route
More informationECHOES FROM THE BAT CAVE
ECHOES FROM THE BAT CAVE Bowl From a Board - Joe Kramer March 2019 Joe Kramer, from Chesapeake Woodturners was our demonstrator for March. Joe presented his techniques for creating a bowl from a board,
More informationGOOD TURNS. October has been a very busy month and it hardly seems. November 2007 W O O D T U R N E R S. President s Message.
CENTRAL OHIO November 2007 GOOD TURNS W O O D T U R N E R S The November meeting will feature several turners demonstrating small holiday gift projects. There will be projects for all skill levels demonstrated
More informationA Publication of the Mid Minnesota Association of Woodturners
A Publication of the Mid Minnesota Association of Woodturners Volume 7, Issue 9 September 30,2017 SHAVINGS The Mid Minnesota Association of Woodturners (MMAW) is a member based not for profit organization,
More informationKris Coyan s Steps to Make a 2-Piece Inside-Out Ornament: 1) Find (2) pieces of wood that have at least two parallel surfaces (such as pen blanks
The October demo was provided by Kris Coyan. Kris showed us how to create very nice but simple tree ornaments using the 2-piece inside-out method. The photo at left are examples of this type of ornament.
More informationWest Tennessee Woodturners Newsletter
West Tennessee Woodturners Newsletter May 2012 Volume 4 Issue 5 Inside this issue: Calendar 2 Minutes 3 Bulletin Board 3 Instant Gallery 4 President s Challenge 5-6 Matos & Cravens Presentations in May.At
More informationTABLE OF CONTENTS PRESIDENT S MESSAGE. Newsletter 13 of 24
PRESIDENT S MESSAGE Newsletter 13 of 24 I hope everyone had a wonderful and joyous Christmas holiday. 2017 is in the books and on to a brighter, healthier, and safer 2018. If you missed the Christmas party,
More informationThe Turning Point The newsletter of the Siouxland Woodturners Chapter of the American Association of Woodturners
The Turning Point The newsletter of the Siouxland Woodturners Chapter of the American Association of Woodturners October 2013 In this issue News Items............... Page 1 Upcoming Meeting Notes.... Page
More informationTHE WOODTURNER. FebruaryDemonstration Making Jewelry on the Lathe CHAS THORNHILL DEMONSTRATOR
Golden Triangle Woodturners Club THE WOODTURNER ME ST M ETING Cen ONDA : 7:00 YO ter F TH PM for the E M Bell and Visual ONTH A TEL Hic k E ory rts (940 PHON ) 38 E 3-12 48 FIR February 2012 Issue No.
More informationPresident s Message By Bob Clark Bill Clark and Friends Dick McCoy working Spindles
July 2010 Newsletter Volume 10 Issue 3 Newsletter of the Antelope Valley Woodturners Association 2535 E. Ave. R-3, Palmdale, CA. 93550 Member of the American Association of Woodturners President Bob Clark
More informationNorthern Rockies Woodworking Guild
Northern Rockies Woodworking Guild March 31, 2018 NRWG.org Volume 13, Issue 7 Officers President Jurgen Weiel Vice President Jarred McDaniel Treasurer Boyd Carson Secretary Dean Center Next Meeting Tuesday,
More informationNorth East Florida Woodturners
North East Florida Woodturners Volume 17 Issue 9 September 2017 An Affiliate of the American Association of Woodturners Club Number 130 - jaxturners.org President s Message In order for an organization
More informationRegular Monthly Meeting ( first Tuesday ) Message from the President. Dave Best. April, Mike Swenson demos for us. Apr 6th - M& M Machinery
Number 102 Utah Woodchips Newsletter April 2010, page 1 Regular Monthly Meeting ( first Tuesday ) Message from the President April, 2010 We met at Timberline Woodworkers Supply in March. Mike Swenson provided
More informationTHE WOODTURNER. George Freeman
Golden Triangle Woodturners Club Denton Texas THE WOODTURNER www.goldentrianglewoodturners.org George Freeman I grew up in Boyd, Texas on the Trinity River Bottoms farm land and woods. I was a Dallas Fireman
More informationCape Cod Woodturners Minutes and News October 7, 2015
Cape Cod Woodturners Minutes and News October 7, 2015 Vice president Jim Silva welcomed 23 members and guests to the meeting. End grain sealer, sandpaper, and CA glue is available from the club for purchase.
More informationTHE WOODTURNER. TIPS and TRICKS
Golden Triangle Woodturners Club Denton Texas THE WOODTURNER www.goldentrianglewoodturners.org TIPS and TRICKS Monday night we will be honored to hear from all of the club members who will be sharing their
More informationPresident s Message By Bob Clark
January 2010 Newsletter Volume 9 Issue 6 Newsletter of the Antelope Valley Woodturners Association 2535 E. Ave. R-3, Palmdale, CA. 93550 Member of the American Association of Woodturners President Bob
More informationChinook Woodturners Guild Monthly Newsletter
Chinook Woodturners Guild Monthly Newsletter Volume 16 October 2016 President s Message: Welcome back to Terry Beaton. Terry is one of our charter members and due to time commitments has been away for
More informationDid you remember the project of the month? Treasurer: Ken Lawson
Professor Paul has done it again! If you were late for class or snoozing, You missed a good session. Leroy s morning demo on Icicles and Finials was on point. He makes it look so effortless. It is easy
More informationThe MUSHROOM The Newsletter of the ADIRONDACK WOODTURNERS ASSOCIATION Volume 6, No. 12 December 2006
The MUSHROOM The Newsletter of the ADIRONDACK WOODTURNERS ASSOCIATION Volume 6, No. 12 December 2006 The MUSHROOM is published 12 times a year. Submissions, notices, calendar tems, suggestions feedback
More informationMeeting Site and Lathe Storage
Windy City Woodturners Newsletter March 2013 Volume 14 Issue 3 Club Officers President Don Johnston 708-482-7628 donsuej@yahoo.com Vice President Nick Page 847-931-9770 nicklpage@sbcglobal.net Treasurer
More informationSOUTHWEST WASHINGTON WOODTURNERS
SOUTHWEST WASHINGTON WOODTURNERS NEWSLETTER JANUARY 2017 Regular meetings are held on the fourth Wednesday of the month. We will meet at our regular time and place this month. JANUARY MEETING 7:00 p.m.
More informationFinger Lakes Woodturners II a Special Interest Group of the Rochester Woodworkers Society
Finger Lakes Woodturners II a Special Interest Group of the Rochester Woodworkers Society www.rochesterwoodworkers.org. February 2008 Meetings 2nd Thursday of each month at WOODCRAFT in Henrietta, NY at
More informationNorthwest Woodworkers Guild
A forum for wo odwor k ers o f a l l skill le vels to shar e their common inter e s ts Northwest Woodworkers Guild The Sawdust News May 2010 http://www.nwwguild.org Next Meeting: McKinnon Furniture Thursday
More informationCICAAW NEWSLETTER. Website CICAAW.org. What s Inside This Issue. Central Indiana Chapter of the American Association of Woodturners April 2018
Central Indiana Chapter of the American Association of Woodturners April 2018 CICAAW NEWSLETTER Officers President: Jim Dupler jdupler01@comcast.net Vice President: 765-860-7036 rddlpark@yahoo.com Treasurer:
More informationPresidentʼs Message. Tuesday, June 10 Chapter Meeting* *Note the change of meeting day and time! VOLUME 4 ISSUE 10! MAY 21, 2014
VOLUME 4 ISSUE 10! MAY 21, 2014 Presidentʼs Message Well, the weather is not cooperating at only 46 when it should be twenty degrees warmer. The plus side to the cooler weather is that the garage, which
More informationCape Cod Woodturners Minutes and News May 6, 2015
Cape Cod Woodturners Minutes and News May 6, 2015 The May meeting started at 6:40 following a pre-meeting hands-on demo by Jim Silva and tool sharpening tutoring by Mike Grady. President Clarke Buchanan
More informationNOR-CAL SHAVINGS Newsletter of Nor-Cal Woodturners, Inc. A Non-Profit Corporation and AAW Affiliate
NOR-CAL SHAVINGS Newsletter of Nor-Cal Woodturners, Inc. A Non-Profit Corporation and AAW Affiliate www.norcalwoodturners.org October 2018 Volume 31, Number 10 President s Message By Jimmy Corbin 1(916)
More informationGBWG Newsletter. March. Executive Members. Other Offices. Inside This Issue
The regular meeting was held on 16 th. The business portion included an update of insurance issues for the club, of updating the website with member photographs of their turnings, and of reminders that
More informationSeptember Newsletter Content Want a better newsletter? Help with the content. articles and or constructive criticism to
September 2005 BWWT will be moving to Y- NOAH for the October meeting The September Meeting will be held at Doll Lumber President Bruce Lance has arranged for this months meeting to be held at our regular
More informationWOODTURNERS. Providing Woodturning Education, Assistance and Experience to the Miami-Dade Community
2013 September Newsletter Vol. 26 Number 9 Workshop 8 Instant Gallery 8 Bring Back WWW.SFWTG.COM South Florida A Chapter of the American Association of Woodturners WOODTURNERS Guild Providing Woodturning
More information