UHF BAND LOW NOISE AMPLIFIER GaAs MMIC
|
|
- Gerald Gray
- 5 years ago
- Views:
Transcription
1 NJGHA UHF BAND LOW NOISE AMPLIFIER GaAs MMIC GENERAL DESCRIPTION NJGHA is a low noise amplifier GaAs MMIC designed for mobile digital TV application (~ MHz). This IC features good gain flatness, and low gain characteristic in out-of-band. This IC achieves low current consumption, low noise figure and low distortion. Also, this IC is integrated the ESD protection circuit. An ultra-small and ultra-thin package of USB-A is adopted. PACKAGE OUTLINE NJGHA APPLICATIONS Wide band application from MHz to MHz Mobile TV and Digital TV applications Mobile phone and tablet PC applications FEATURES Wide operating frequency range Low voltage operation Low current consumption Gain Low noise figure High P-dB(IN) High Input IP Ultra-small & ultra-thin package ~MHz +.V typ..ma typ..db typ..db typ. -.dbm typ. +.dbm typ. USB-A (Package size: mm x.mm x.mm typ.) PIN CONFIGURATION (Top View) VG RFOUT Pin INDEX Bias Circuit Pin Connection.. RFIN... RFOUT. VG RFIN Note: Specifications and description listed in this catalog are subject to change without notice. Ver
2 NJGHA ABSOLUTE MAXIMUM RATINGS T a =+ C, Z s =Z l = ohm PARAMETER SYMBOL CONDITIONS RATINGS UNITS Drain Voltage V DD VDD terminal V Input power P IN V DD =.V + dbm Power dissipation P D On PCB board, Tjmax= C mw Operating temperature T opr -~+ C Storage temperature T stg -~+ C ELECTRICAL CHARACTERISTICS (DC) General conditions: V DD =.V, T a =+ C, Z s =Z l = ohm, with application circuit. PARAMETERS SYMBOL CONDITIONS MIN TYP MAX UNITS Operating voltage V DD... V Operating Current I DD RF OFF -.. ma ELECTRICAL CHARACTERISTICS (RF) General conditions: V DD =.V, f RF =~MHz, T a =+ C, Z s =Z l = ohm, with application circuit. PARAMETERS SYMBOL CONDITIONS MIN TYP MAX UNITS Operating Frequency f RF MHz Small signal gain Gain... db Gain flatness G flat -.. db Noise figure Input power at db gain compression point Input rd order intercept point NF Exclude PCB & connector losses (.db) -.. db P -db(in) dbm IIP f=f RF, f=f RF +khz, Pin=-dBm dbm RF IN VSWR VSWRi -.. RF OUT VSWR VSWRo
3 NJGHA TERMINAL INFORMATION No. SYMBOL DESCRIPTION Ground terminal. RFIN RF input terminal. This terminal requires the DC-blocking capacitor and the DC-feed Inductor as shown in the application circuit. Ground terminal. Ground terminal. RFOUT RF output terminal. This terminal requires the external matching circuit as shown in the application circuit. VG Power supply pin of the bias circuit. Please supply the voltage as same as the LNA voltage. CAUTION ) Ground terminals (pin, pin and pin) should be connected with the ground plane close as possible. - -
4 NJGHA ELECTRICAL CHARACTERISTICS (Conditions: T a =+ C, VDD=.V, Z s =Z l = ohm, with application circuit.) Pout vs. Pin (frf=mhz) Gain, IDD vs. Pin (frf=mhz) Pout (dbm) Pout Gain (db) 9 Gain IDD IDD (ma) - - P-dB(IN)=-.dBm Pin (dbm) P-dB(IN)=-.dBm Pin (dbm) Pout, IM vs. Pin (f=mhz, f=.mhz) Gain, NF vs. Frequency Pout, IM (dbm) - Pout IM IIP=+.dBm Pin (dbm) Gain (db). Gain 9.. NF. Frequency (MHz) NF (db) P-dB(IN) vs. Frequency IIP, OIP vs. Frequency (f=frequency, f=frequency+.mhz, Pin=-dBm) OIP P-dB(IN) (dbm) - - P-dB(IN) IIP, OIP (dbm) IIP - Frequency (MHz) Frequency (MHz) - -
5 NJGHA ELECTRICAL CHARACTERISTICS (Conditions: T a =+ C, VDD=.V, Z s =Z l = ohm, with application circuit.) K-factor vs. Frequency Gain, NF vs. VDD (frf=mhz) Gain K-factor Gain (db) NF (db) NF Frequency (MHz) VDD (V) P-dB(IN) vs. VDD (frf=mhz) IIP, OIP vs. VDD (f=mhz, f=.mhz, Pin=-dBm) P-dB(IN) (dbm) - P-dB(IN) IIP, OIP (dbm) OIP - IIP - VDD (V) - VDD (V) IDD vs. VDD (RF OFF) VSWR vs. VDD (frf=~mhz) IDD (ma) IDD VSWRi(max.), VSWRo(max.) VSWRi(max.) VSWRo(max.) VDD (V) VDD (V) - -
6 NJGHA ELECTRICAL CHARACTERISTICS (Conditions: VDD=.V, Z s =Z l = ohm, with application circuit.) Gain, NF vs. Temp. (frf=mhz) P-dB(IN) vs. Temp. (frf=mhz) Gain Gain (db) NF (db) P-dB(IN) (dbm) - P-dB(IN) NF - - Temperature (C o ) - - Temperature (C o ) IIP, OIP vs. Temp. (f=mhz, f=.mhz, Pin=-dBm) IDD vs. Temp. (RF OFF) IIP, OIP (dbm) OIP IIP IDD (ma) IDD - Temperature (C o ) - Temperature (C o ) VSWR vs. Temp. (frf=~mhz) VSWRi(max.), VSWRo(max.) VSWRo(max.) VSWRi(max.) - Temperature (C o ) - -
7 NJGHA ELECTRICAL CHARACTERISTICS (Conditions: T a =+ C, VDD=.V, Z s =Z l = ohm, with application circuit.) S, S S, S VSWR Zin, Zout S, S (~GHz) S, S (~GHz) - -
8 NJGHA TEST CIRCUIT C pf V DD =.V VG RFOUT L nh RFOUT Bias Circuit L nh C pf RFIN C pf L nh RFIN TEST PCB LAYOUT Parts List Parts ID Notes C L V DD L~L C~C MURATA (LQPT series) MURATA (GRM series) RF IN L C C L RF OUT PCB (FR-): t=.mm MICROSTRIP LINE WIDTH=.mm (Z = ohm) PCB SIZE=.mmx.mm PRECAUTIONS [] C is a DC-Blocking capacitor, and L is a DC-feed inductor. [] L, L, and C formed the output matching circuit. [] C is a bypass capacitor. [] Ground terminals (pin, pin and pin) should be connected with ground plane as close as possible in order to limit ground path induction. [] All external parts are placed as close as possible to the IC. - -
9 NJGHA MEASUREMENT BLOCK DIAGRAM V =.V VDD=.9V RF Input DUT RF Output Port Port Network Analyzer S parameter Measurement Block Diagram V DD =.V VDD=.9V RF Input DUT RF Output Noise Source N.S. Output Input NF Analyzer Meter Noise Figure Measurement Block Diagram freq db Attenuator V DD =.V Signal Generator RF Input DUT RF Output Spectrum Analyzer Signal Generator freq db Attenuator Power Comb. IF and IM Measurement Block Diagram for IIP - 9 -
10 NJGHA PACKAGE OUTLINE (USB-A).± S S TERMINAL TREAT :Au Substrate :FR Molding material :Epoxy resin UNIT :mm WEIGHT :.mg. (MIN.).±. C. R..±....±...±. Photo resist coating..±..±. Cautions on using this product This product contains Gallium-Arsenide (GaAs) which is a harmful material. Do NOT eat or put into mouth. Do NOT dispose in fire or break up this product. Do NOT chemically make gas or powder with this product. To waste this product, please obey the relating law of your country. [CAUTION] The specifications on this databook are only given for information, without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. This product may be damaged with electric static discharge (ESD) or spike voltage. Please handle with care to avoid these damages. - -
GPS LOW NOISE AMPLIFIER GaAs MMIC. -2.0dBm GND RFOUT
GPS LOW NOISE AMPLIFIER GaAs MMIC GENERAL DESCRIPTION This IC is a Low noise amplifier GaAs MMIC designed for GPS. This amplifier provides low noise figure, high gain and high IP operated by single low
More informationUHF BAND LOW NOISE AMPLIFIER GaAs MMIC
NJG9UA UHF BAND LOW NOISE AMPLIFIER GaAs MMIC GENERAL DESCRIPTION The NJG9UA is a low noise amplifier GaAs MMIC designed for mobile digital TV application (7~77 MHz). This IC has a LNA pass-through function
More informationGNSS LOW NOISE AMPLIFIER
GNSS LOW NOISE AMPLIFIER NJG8HA8 GENERAL DESCRIPTION The NJG8HA8 is a low noise amplifier GaAs MMIC designed for GNSS (Global Navigation Satellite Systems). This amplifier provides low noise figure, high
More informationGNSS LOW NOISE AMPLIFIER GaAs MMIC
GNSS LOW NOISE AMPLIFIER GaAs MMIC GENERAL DESCRIPTION NJG1130KA1 is a low noise amplifier GaAs MMIC designed for GNSS (Global Navigation Satellite Systems). The LNA offers excellent low noise figure,
More informationLOW NOISE AMPLIFIER GaAs MMIC. -4.0dBm
LOW NOISE AMPLIFIER GaAs MMIC GENERAL DESCRIPTION NJG7HB6 is a Low Noise Amplifier GaAs MMIC designed for GPS This amplifier provides low noise figure, high gain and high IP operated by single low positive
More informationWIDE BAND LOW NOISE AMPLIFIER GaAs MMIC
WIDE BAND LOW NOISE AMPLIFIER GaAs MMIC GENERAL DESCRIPTION The NJGKA is a wide band low noise amplifier GaAs MMIC designed for mobile TV application. And this amplifier can be tuned to wide frequency
More informationGNSS LOW NOISE AMPLIFIER
GNSS LOW NOISE AMPLIFIER GENERAL DESCRIPTION The NJG11KA1 is a low noise amplifier GaAs MMIC designed for GNSS (Global Navigation Satellite Systems). This amplifier achieves high gain and a good balance
More information2GHz BAND LOW NOISE AMPLIFIER
GHz BAND LOW NOISE AMPLIFIER GENERAL DESCRIPTION is a low noise amplifier GaAs MMIC designed for GHz band application, and.ghz to.ghz operation with modified schematic. This IC has the function which bypasses
More informationWIDE BAND LOW NOISE AMPLIFIER GaAs MMIC
NJG114UA2 WIDE BAND LOW NOISE AMPLIFIER GaAs MMIC GENERAL DESCRIPTION The NJG114UA2 is a fully matched wide band low noise amplifier GaAs MMIC for terrestrial and satellite applications. To achieve wide
More informationGNSS LOW NOISE AMPLIFIER GaAs MMIC
NJGUA GNSS LOW NOISE AMPLIFIER GaAs MMIC GENERAL DESCRIPTION The NJGUA is a low noise amplifier GaAs MMIC designed for GNSS (Global navigation Satellite Systems). The NJGUA is featured very small size,
More informationWide Band Low Noise Amplifier GaAs MMIC
NJG12KA1 Wide Band Low Noise Amplifier GaAs MMIC GENERAL DESCRIPTION The NJG12KA1 is a fully matched wide band low noise amplifier GaAs MMIC for terrestrial application. To achieve wide dynamic range,
More informationLow Noise Amplifier with Bypass for LTE
NJG117UX2 Low Noise Amplifier with Bypass for LTE GENERAL DESCRIPTION NJG117UX2 is low noise amplifier with bypass switch for LTE which covers frequency from 185 to 22MHz and from 23 to 269MHz. The NJG117UX2
More information800MHz BAND LOW NOISE AMPLIFIER GaAs MMIC
NJG14KB 8MHz BAND LOW NOISE AMPLIFIER GaAs MMIC GENERAL DESCRIPTION PACKAGE OUTLINE NJG14KB is a variable gain low noise amplifier (LNA). At 8MHz band, noise figure is 1.dB, variable gain re is 1dB and
More information30dB P IN =25dBm. 0.50dB P IN =25dBm. 33dB P IN =25dBm. 21dB
NJG1HA8 SPDT SWITCH GaAs MMIC GENERAL DESCRIPTION The NJG1HA8 is a GaAs SPDT switch IC suited for antenna switch of WiMAX application and other wireless handsets. The NJG1HA8 features high power handling,
More informationPDC Dual Band LNA GaAs MMIC
PDC Dual Band LNA GaAs MMIC GENERAL DESCRIPTION The is a dual band low noise amplifier for 8MHz and MHz band. The band switching between 8MHz CD, A Band and MHz is made by bit control signal by using inverter
More information2-way Active Splitter GaAs MMIC
NJG111MD7 -way Active Splitter GaAs MMIC GENERAL DESCRIPTION The NJG111MD7 is -way active splitter with normally loop through switch GaAs MMIC for terrestrial applications, and this IC can be tuned to
More informationDPDT SWITCH GaAs MMIC
DPDT SWITCH GaAs MMIC GENERAL DESCRIPTION NJG1648HB6 is a GaAs DPDT switch IC that features low loss, low current consumption and low control voltage. This IC includes logic decoder, and can be operated
More informationHIGH POWER SP3T SWITCH GaAs MMIC
HIGH POWER SP3T SWITCH GaAs MMIC GENERAL DESCRIPTION The NJG1682MD7 is a GaAs SP3T switch MMIC suitable for LTE/UMTS/CDMA/GSM applications. The NJG1682MD7 features very low insertion loss, high isolation
More information800MHz BAND FRONT-END GaAs MMIC
MHz BAND FRONT-END GaAs MMIC GENERAL DESCRIPTION NJG7KC is a front-end GaAs MMIC including a LNA, a local amplifier and a mixer, designed mainly for MHz band cellular phone handsets. The ultra small &
More informationHIGH POWER SPDT SWITCH GaAs MMIC
HIGH POWER SPDT SWITCH GaAs MMIC GENERAL DESCRIPTION The NJG1681MD7 is a GaAs SPDT switch MMIC suitable for LTE/UMTS/CDMA/GSM applications. The NJG1681MD7 features very low insertion loss, high isolation
More informationHigh Isolation SP4T SWITCH
High Isolation SP4T SWITCH NJG1699MD7 GENERAL DESCRIPTION The NJG1699MD7 is a GaAs high isolation SP4T switch MMIC. It features low insertion loss and very high isolation. It has integrated DC blocking
More informationSPDT SWITCH GaAs MMIC
SPDT SWITCH GaAs MMIC! GENERAL DESCRIPTION! PACKAGE OUTLINE The NJG1608KB2 is a SPDT switch IC featured low insertion loss, medium handling power and high isolation. The NJG1608KB2 is suitable for switching
More informationGPS Front-End Module
NJGPCD GPS Front-End Module GENERAL DESCRIPTION The NJGPCD is a front-end module (FEM) designed for GPS applications. Its ultra-low current consumption is particularly suitable for wearable devices. This
More informationDPDT SWITCH GaAs MMIC
DPDT SWITCH GaAs MMIC! GENERAL DESCRIPTION! PACKAGE OUTLINE The NJG1657MD7 is a GaAs DPDT switch featured low insertion loss, high isolation and small size package, and suited for mobile terminal applications.
More informationSP5T SWITCH GaAs MMIC
SP5T SWITCH GaAs MMIC GENERAL DESCRIPTION The NJG1667MD7 is a GaAS SP5T switch featured low insertion loss, high isolation and small size package, and suited for mobile terminal applications. The NJG1667MD7
More informationDPDT SWITCH GaAs MMIC
DPDT SWITCH GaAs MMIC GENERAL DESCRIPTION NJG162HE3 is a GaAs high power DPDT switch MMIC for antenna switch of tri- and dual-mode cellular phone application such as CDMA, GPS and PCS. This switch features
More informationHigh Isolation SPDT SWITCH
High Isolation SPDT SWITCH GENERAL DESCRIPTION The NJG1697EM1 is a 1bit control GaAs high isolation SPDT switch MMIC. The NJG1697EM1 features very high isolation and low control voltage. It has integrated
More informationDPDT SWITCH GaAs MMIC
DPDT SWITCH GaAs MMIC NJG1528KC1 Revised Feb./16/01 Ver.2 GENERAL DESCRIPTION NJG1528KC1 is a GaAs high power DPDT switch MMIC for antenna switch of tri- and dual-mode cellular phone application such as
More informationDPDT SWITCH GaAs MMIC
DPDT SWITCH GaAs MMIC GENERAL DESCRIPTION NJG1528HD3 is a GaAs high power DPDT switch MMIC for antenna switch of tri- and dual-mode cellular phone application such as CDMA, AMPS and PCS. This switch features
More informationWIDE BAND AGC AMPLIFIER GaAs MMIC
NJGF WIDE BAND AGC AMPLIFIER GaAs MMIC GENERAL DESCRIPTION NJGF is a GaAs MMIC designed mainly for wireless phone handsets at frequency range of 8MHz from.ghz. NJGF is a variable gain amplifier with db
More informationSPDT SWITCH GaAs MMIC
NJG181K75 SPDT SWITCH GaAs MMIC GENERAL DESCRIPTION The NJG181K75 is a SPDT switch IC suited for switching transmit/receive signals at 82.11 a/b/g/n/ac applications. The NJG181K75 features low insertion
More informationGPS Front-End Module
GPS Front-End Module GENERAL DESCRIPTION The NJG11PCD is a front-end module (FEM) designed for GPS applications. The NJG11PCD offers high gain, low noise figure, high linearity and very high out-band rejection
More informationSP4T SWITCH GaAs MMIC
SP4T SWITCH GaAs MMIC GENERAL DESCRIPTION NJG1519KC1 is a GaAs high power SP4T switch MMIC for antenna switch of dual mode cellular phone application such as GSM/DCS18. This switch is designed for an antenna
More informationMEDIUM POWER AMPLIFIER GaAs MMIC
MEDIUM POWER AMPLIFIER GaAs MMIC GENERAL DESCRIPTION NJG132V is a GaAs MMIC designed mainly for the final stage power amplifier of Japanese PHS handset, but suitable digital wireless phone and wireless
More informationSPDT SWITCH GaAs MMIC
SPDT SWITCH GaAs MMIC GENERAL DESCRIPTION NJG1516R is a GaAs SPDT switch IC suited for antenna switch of cellular phone handset. This switch features low loss, high isolation at high power, and exhibits
More informationSPDT SWITCH GaAs MMIC
NJG181K75 SPDT SWITCH GaAs MMIC GENERAL DESCRIPTION The NJG181K75 is a SPDT switch IC suited for switching transmit/receive signals at 82.11 a/b/g/n/ac applications. The NJG181K75 features low insertion
More informationHIGH POWER SP4T SWITCH GaAs MMIC
NJG189ME7 HIGH POWER SP4T SWITCH GaAs MMIC GENERAL DESCRIPTION The NJG189ME7 is a high power SP4T switch MMIC suitable for LTE-U / LAA, WLAN, and LTE applications. This switch features very low insertion
More informationGPS and GLONASS Front-End Module
GPS and GLONASS Front-End Module GENERAL DESCRIPTION The NJG117PCD is a front-end module (FEM) designed for GPS and GLONASS applications. The NJG117PCD offers high gain, low noise figure, high linearity
More information700MHz Band Application
7MHz Band Application SUMMARY The characteristics of 7MHz band have evaluated as follows. The evaluation circuit structure and measured data are reviewed. MEASURED DATA DC Characteristics General Condition:
More informationSP3T SWITCH GaAs MMIC
NJG184K64 SP3T SWITCH GaAs MMIC GENERAL DESCRIPTION The NJG184K64 is a GaAs SP3T switch MMIC which is suitable for WLAN(82.11a/b/g/n/ac) and Bluetooth applications. This MMIC switches between a common
More informationSP10T ANTENNA SWITCH GaAs MMIC
SP10T ANTENNA SWITCH GaAs MMIC GENERAL DESCRIPTION NJG1686MHH is a GaAs SP10T antenna switch MMIC suitable for LTE/3G/GSM multimode applications. This switch includes on-chip decoder circuits and low pass
More informationSPDT SWITCH GaAs MMIC
NJG115K75 SPDT SWITCH GaAs MMIC GENERAL DESCRIPTION The NJG115K75 is a 1bit control SPDT switch. The switch is used for WLAN system. The switch features low insertion loss, high isolation for high frequency
More informationSP3T SWITCH GaAs MMIC
SP3T SWITCH GaAs MMIC NJG188K94 GENERAL DESCRIPTION PACKAGE OUTLINE The NJG188K94 is a low power SP3T switch controlled by two bits signals. The low loss performance and high Isolation makes the switch
More informationW-LAN/WiMAX Application
1. 2.4GHz BAND APPLICATION W-LAN/WiMAX Application 1-1 SUMMARY The characteristics of 2.4GHz band have evaluated as follows. The evaluation circuit structure and measured data are reviewed. 1-2-1 MEASURED
More informationNJG1175KG1. 5 GHz Low Noise Amplifier with Bypass function. H =V CTL(H), L =V CTL(L)
5 GHz Low Noise Amplifier with Bypass function FEATURES Operating frequency Operating voltage [LNA active mode] High gain Low noise figure High IIP3 Small package size f = 4900 to 5925 MHz 2.5 to 5.5 V
More informationWIDE BAND AGC AMPLIFIER GaAs MMIC
NJGF WDE BAND AGC AMPLFER GaAs MMC GENERAL DESCRPTON NJGF is a GaAs MMC designed mainly for wireless phone handsets at frequency range of 8MHz from.ghz. NJGF is a variable gain amplifier with db dynamic
More informationProduct Specifications Approval Sheet
TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com
More informationFeatures OBSOLETE. = +25 C, Rbias = 0 Ohm. Bypass Mode Failsafe Mode Parameter
7 Typical Applications The HMC668LP3(E) is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Tower Mounted Amplifiers Test & Measurement Equipment Functional Diagram
More informationSatellite Broadcasting Application
Application Note NJG111MD7 Satellite Broadcasting Application 1. Summary The characterisitics of Sastellite Broadcasting (1MHz~1MHz) have evaluated as follows. The evaluation circuit structure and measured
More informationFeatures. Parameter* Min. Typ. Max. Units Frequency Range GHz Gain 2 5 db. Gain Variation over Temperature
v3.1 HMC59MSGE AMPLIFIER,. -.9 GHz Typical Applications The HMC59MSGE is ideal for: DTV Receivers Multi-Tuner Set Top Boxes PVRs & Home Gateways Functional Diagram Features Single-ended or Balanced Output
More informationMMA GHz 1W Traveling Wave Amplifier Data Sheet
Features: Frequency Range:.1 2 GHz P3dB: +29 dbm Gain: 12.5 db Vdd =12 V Ids =5 ma Input and Output Fully Matched to 5 Ω Applications: Fiber optics communication systems Microwave and wireless communication
More informationMGA Low Noise Amplifier with switchable Bypass/Shutdown Mode in Low Profile Package. Features. Applications. VBias
MGA-4 Low Noise Amplifier with switchable Bypass/Shutdown Mode in Low Profile Package Data Sheet Description Avago Technologies MGA-4 is an economical, easy-to-use GaAs MMIC Low Noise Amplifier (LNA) with
More informationData Sheet. MGA-635T6 GPS Low Noise Amplifier with Variable Bias Current and Shutdown Function 3FYM. Description. Features.
MGA-T GPS Low Noise Amplifier with Variable Bias Current and Shutdown Function Data Sheet Description Avago Technologies MGA-T is a LNA designed for GPS/ISM/Wimax applications in the (.9-.)GHz frequency
More informationMAAL Low Noise Amplifier GHz. Features. Functional Block Diagram. Description. Pin Configuration 1. Ordering Information 2,3 N/C
MAAL-4.1-3. GHz Features Single Voltage Supply 3V ~ V Integrated Active Bias Circuit Adjustable Current with an External Resistor Low Noise Figure High Linearity OIP3, 34 dbm @ 2 GHz Broadband Match Integrated
More informationCMD187C GHz Driver Amplifier. Features. Functional Block Diagram. Description
Features Functional Block Diagram Wide bandwidth High linearity Low current consumption Pb-free RoHs compliant 4x4 mm SMT package Description The CMD187C4 is a wideband driver amplifier housed in a leadless
More informationMGA Low Noise Amplifier with switchable Bypass/Shutdown Mode in Low Profile Package. Features. Applications. VBias
MGA-65606 Low Noise Amplifier with switchable Bypass/Shutdown Mode in Low Profile Package Data Sheet Description Avago Technologies MGA-65606 is an economical, easyto-use GaAs MMIC Low Noise Amplifier
More information4-8 GHz Low Noise Amplifier
4-8 GHz Low Noise Amplifier Features Functional Block Diagram Ultra low noise figure High gain broadband performance Single supply voltage: +4. V @ 75 ma Pb-free RoHs compliant 3x3 QFN package Description
More informationCMD GHz Low Noise Amplifier
Features Functional Block Diagram Ultra low noise figure High gain broadband performance Single supply voltage: +3. V @ 5 ma Small die size Vdd Description The CMD7 is a broadband MMIC low noise amplifier
More informationCMD GHz Low Noise Amplifier. Features. Functional Block Diagram. Description
Features Functional Block Diagram Ultra low noise performance High linearity Small die size 2 GB 3 Vgg Vdd 4 RFIN RFOUT Description The CMD63 is a high dynamic range GaAs MMIC low noise amplifier ideally
More informationData Sheet MGA High Gain, High Linearity Active Bias Low Noise Amplifier. Description. Features. Specifications
MGA-14516 High Gain, High Linearity Active Bias Low Noise Amplifier Data Sheet Description Avago Technologies MGA-14516 is a two stage, easy-touse GaAs MMIC Low Noise Amplifier (LNA) with active bias.
More informationCMD157P GHz Low Noise Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 3.
Features Functional Block Diagram Ultra low noise figure High gain broadband performance Single supply voltage: +3. V @ 52 ma Pb-free RoHs compliant 3x3 QFN package Description The CMD7P3 is a broadband
More informationData Sheet. MGA-231T6 High-Gain GPS LNA with Variable Current and Shutdown Function 31YM. Description. Features
MGA-231T6 High-Gain GPS LNA with Variable Current and Shutdown Function Data Sheet Description Avago Technologies MGA-231T6 is a low-noise amplifier (LNA) designed for GPS/ISM/Wimax applications in the
More informationFeatures. = +25 C, Vdd1, 2, 3 = 5V, Idd = 250 ma*
v.4 HMC498LC4 Typical Applications Features The HMC498LC4 is ideal for use as a LNA or Driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use
More informationGain Control Range db
v1.112-12 GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems X-Band Radar Test Equipment & Sensors Functional Diagram Features Wide Gain Control
More informationCMD233C GHz Distributed Low Noise Amplifier. Features. Functional Block Diagram. Description
Features Functional Block Diagram Wide bandwidth Single positive supply voltage Low noise figure Pb-free RoHs compliant 4x4 QFN package Description The CMD233C4 is a wideband GaAs MMIC low noise amplifier
More informationMMA R4 30KHz-50GHz Traveling Wave Amplifier Data Sheet October 2012
Features: Frequency Range: 30KHz 40 GHz P1dB: +22 dbm Vout: 7V p-p @50Ω Gain: 13.5 db Vdd =7 V Ids = 200 ma Input and Output Fully Matched to 50 Ω In 4x4mm QFN package Applications: Fiber optics communication
More information20 GHz to 44 GHz, GaAs, phemt, MMIC, Low Noise Amplifier HMC1040CHIPS
Data Sheet FEATURES Low noise figure: 2 db typical High gain: 25. db typical P1dB output power: 13.5 dbm, 2 GHz to GHz High output IP3: 25.5 dbm typical Die size: 1.39 mm 1..2 mm APPLICATIONS Software
More information50 GHz to 95 GHz, GaAs, phemt, MMIC, Wideband Power Amplifier ADPA7001CHIPS
FEATURES Gain:.5 db typical at 5 GHz to 7 GHz S11: db typical at 5 GHz to 7 GHz S: 19 db typical at 5 GHz to 7 GHz P1dB: 17 dbm typical at 5 GHz to 7 GHz PSAT: 1 dbm typical OIP3: 5 dbm typical at 7 GHz
More informationMGA High Gain, High Linearity, Very Low Noise Amplifier. Features. Specifications. Applications. All other pins NC Not Connected
MGA- High Gain, High Linearity, Very Low Noise Amplifier Data Sheet Description Avago Technologies MGA- is a two stage, easy-touse GaAs MMIC Low Noise Amplifier (LNA). The LNA has low noise with good input
More informationCMD167P GHz Low Noise Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 3.0 V, T A = 25 o C, F=12 GHz
Features Functional Block Diagram Low noise figure Low current consumption Single positive supply voltage Pb-free RoHs compliant 3x3 QFN package Description The CMD167P3 is a broadband MMIC low noise amplifier
More informationFeatures. Gain: 17 db. OIP3: 25 dbm. = +25 C, Vdd 1, 2 = +3V
v.7 HMCLC Typical Applications The HMCLC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space Functional
More informationHMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram
v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single
More informationData Sheet. VMMK GHz Positive Gain Slope Low Noise Amplifier in SMT Package. Features. Description
VMMK-3603 1-6 GHz Positive Gain Slope Low Noise Amplifier in SMT Package Data Sheet Description The VMMK-3603 is a small and easy-to-use, broadband, positive gain slope low noise amplifier operating in
More informationFeatures. Gain: 14.5 db. Electrical Specifications [1] [2] = +25 C, Rbias = 825 Ohms for Vdd = 5V, Rbias = 5.76k Ohms for Vdd = 3V
Typical Applications The HMC77ALP3E is ideal for: Fixed Wireless and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Public Safety Radio Access Points Functional Diagram Features Noise Figure:.
More informationSCG002 HIGH LINEARITY BROADBAND AMPLIFIER
SCG2 Features DC to 6 MHz 2 db Gain at 1 MHz 15 dbm Output P1dB at 1 MHz 29 dbm Output IP3 at 1 MHz 3.8 db Noise Figure at 2 MHz Applications Broadband Gain Blocks High Linearity Amplifiers Packages Available
More informationCMD119P GHz Low Noise Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 3.6 V, T A = 25 o C, F=8GHz
Features Functional Block Diagram Ultra low noise figure Low current consumption High gain broadband performance Single supply voltage: +3.6 V @ 3 ma Pb-free RoHs compliant 3x3 QFN package Description
More informationCMD GHz Low Noise Amplifier. Functional Block Diagram. Features. Description
33- GHz Low Noise Amplifier Features Functional Block Diagram Ultra low noise performance All positive bias Low current consumption Small die size 2 3 Vgg GB RFIN Vdd RFOUT Description The CMD9 is a highly
More informationMGA Current Adjustable Low Noise Amplifier
Products > RF ICs/Discretes > RF ICs > GaAs Amplifiers, Mixers, Switches > MGA-68563 MGA-68563 Current Adjustable Low Noise Amplifier Description The MGA-68563 is an easy to use, economical GaAs MMIC amplifier
More informationIF Digitally Controlled Variable-Gain Amplifier
19-2601; Rev 1; 2/04 IF Digitally Controlled Variable-Gain Amplifier General Description The high-performance, digitally controlled variable-gain amplifier is designed for use from 0MHz to 400MHz. The
More informationData Sheet. MGA W High Linearity Driver Amplifier. Features. Description. Specifications. Pin connections and Package Marking
MGA-31816 0.1 W High Linearity Driver Amplifier Data Sheet Description Avago Technologies MGA-31816 is a high linearity driver MMIC Amplifier housed in a standard QFN 3X3 16 lead plastic package. It features
More informationMGA High Gain, High Linearity, Very Low Noise Amplifier. Features. Specifications
MGA- High Gain, High Linearity, Very Low Noise Amplifier Data Sheet Description Avago Technologies MGA- is a two stage, easy-touse GaAs MMIC Low Noise Amplifier (LNA). The LNA has low noise with good input
More informationFeatures. = +25 C, Vdd =+28V, Idd = 850 ma [1]
v1.413 HMC87F POWER AMPLIFIER, 2 - GHz Typical Applications The HMC86F is ideal for Test Instrumentation General Communications Radar Functional Diagram Features High Psat: +38. dbm Power Gain at Psat:
More informationFeatures. = +25 C, Vdd = +15V, Vgg2 = +9.5V [1], Idq = 500 ma [2]
v3.41 Typical Applications Features The is ideal for: Test Instrumentation Military & Space Fiber optics Functional Diagram P1dB Output Power: + dbm Psat Output Power: + dbm High Gain: db Output IP3: 42
More informationMGA-645T6 Data Sheet Description Features Component Image Typical Performance 4FYM Pin Configuration GND Top View Applications Simplified Schematic
MGA-5T Low Noise Amplifier with Bypass/Shutdown Mode in Low Profile Package Data Sheet Description Avago Technologies MGA-5T is an economical, easy-to-use GaAs MMIC Low Noise Amplifier (LNA) with Bypass/
More informationFeatures. = +25 C, Vdd 1, 2, 3 = +3V
v.11 HMC6LC AMPLIFIER, 6-2 GHz Typical Applications The HMC6LC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military
More informationFeatures OBSOLETE. Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Supply Current (Idd) ma
7 Typical Applications The HMC667LP2(E) is ideal for: WiMAX, WiBro & Fixed Wireless SDARS & WLAN Receivers Infrastructure & Repeaters Access Points Telematics & DMB Functional Diagram v2.11 Electrical
More informationFeatures. Specifications
MGA-30489 0.25W Driver Amplifier Data Sheet Description Avago Technologies s MGA-30489 is a 0.25W highly dynamic range Driver Amplifier MMIC, housed in a SOT-89 standard plastic package. The device features
More informationCMD GHz GaN Low Noise Amplifier. Features. Functional Block Diagram. Description
Features Functional Block Diagram Ultra wideband performance Low noise figure High RF power survivablility Low current consumption Small die size Vdd Vgg2 RFOUT Description RFIN The CMD2 is a wideband
More informationDISCONTINUED PC3232TB BIPOLAR ANALOG INTEGRATED CIRCUIT 5 V, SILICON GERMANIUM MMIC MEDIUM OUTPUT POWER AMPLIFIER DESCRIPTION FEATURES APPLICATIONS
DESCRIPTION BIPOLAR ANALOG INTEGRATED CIRCUIT PC3232TB 5 V, SILICON GERMANIUM MMIC MEDIUM OUTPUT POWER AMPLIFIER The PC3232TB is a silicon germanium (SiGe) monolithic integrated circuit designed as IF
More informationCMD132P GHz Low Noise Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 3.
Features Functional Block Diagram Ultra low noise figure Low current consumption High gain broadband performance Single supply voltage: +3.6 V @ 3 ma Pb-free RoHs compliant 3x3 QFN package Description
More informationMMA051PP45 Datasheet. DC 22 GHz 1W GaAs MMIC phemt Distributed Power Amplifier
MMA051PP45 Datasheet DC 22 GHz 1W GaAs MMIC phemt Distributed Power Amplifier Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of
More information2-20 GHz Driver Amplifier
2-2 GHz Driver Amplifier Features Functional Block Diagram Wide bandwidth High linearity Low current consumption Pb-free RoHs compliant 4x4 mm SMT package Description The CMD187C4 is a wideband driver
More informationData Sheet. MGA High Gain, High Linearity, Active Bias, Low Noise Amplifier. Description. Features. Specifications
MGA-13516 High Gain, High Linearity, Active Bias, Low Noise Amplifier Data Sheet Description Avago Technologies MGA-13516 is a two stage, easy-touse GaAs MMIC Low Noise Amplifier (LNA) with active bias.
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 70 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2.5 db Gain: 13 db P1dB
More information2 3 ACG1 ACG2 RFIN. Parameter Min Typ Max Units Frequency Range
Features Functional Block Diagram Ultra wideband performance High linearity High output power Excellent return losses Small die size 2 3 ACG1 ACG2 RFOUT & Vdd Description RFIN 1 The is wideband GaAs MMIC
More information87x. MGA GHz 3 V Low Current GaAs MMIC LNA. Data Sheet
MGA-876 GHz V Low Current GaAs MMIC LNA Data Sheet Description Avago s MGA-876 is an economical, easy-to-use GaAs MMIC amplifier that offers low noise and excellent gain for applications from to GHz. Packaged
More informationCMD GHz Distributed Low Noise Amplifier RFIN
- GHz Distributed Low Noise Amplifier Features Wide bandwidth Single positive supply voltage Low noise figure Small die size Description Applications Wideband communication systems Point-to-point radios
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 45 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2. db High Gain: 22 db
More informationMMA M4. Features:
Features: Frequency Range: 0.1 26.5 GHz P3dB: +27 dbm Gain: 12.5 db Vdd =8 to 12 V Ids =250 to 500 ma Input and Output Fully Matched to 50 Ω Surface Mount, RoHs Compliant QFN 4x4mm package Applications:
More informationFeatures. = +25 C, Vdd = +10 V, Idd = 350 ma
HMC97APME v2.4 POWER AMPLIFIER,.2-22 GHz Typical Applications The HMC97APME is ideal for: Test Instrumentation Military & Space Functional Diagram Features High P1dB Output Power: + dbm High : 14 db High
More information