NCS2200, NCS2200A, NCV2200, NCS2202A. Low Voltage Comparators

Transcription

1 NCS22, NCS22A, NCV22, NCS222A Low Voltage Comparators The NCS22 Series is an industry first subone volt, low power comparator family. These devices consume only A of supply current. They are guaranteed to operate at a low voltage of.8 V which allows them to be used in systems that require less than. V and are fully operational up to 6. V which makes them convenient for use in both 3. V and. V systems. Additional features include no output phase inversion with overdriven inputs, internal hysteresis, which allows for clean output switching, and railtorail input and output performance. The NCS22 Series is available in complementary and open drain outputs and a variety of packages. There are two industry standard pinouts for SOT23 and SC7 packages. The NCS22 is also available in the tiny DFN 2x2.2 package. The NCS22A and NCS222A are available in UDFN.2x. package. See package option information in Table on page 2 for more information. Features Operating Voltage of.8 V to 6. V RailtoRail Input/Output Performance Low Supply Current of A No Phase Inversion with Overdriven Input Signals Glitchless Transitioning in or out of TriState Mode Complementary or Open Drain Output Configuration Internal Hysteresis Propagation Delay of. s for NCS22 NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECQ Qualified and PPAP Capable These Devices are PbFree and are RoHS Compliant Typical Applications Single Cell NiCd/NiMH Battery Powered Applications Automotive End Products Cellphones, Smart Phones Alarm and Security Systems Personal Digital Assistants 6 SOT23 (TSOP) SN SUFFIX CASE 483 DFN 2x2.2 SQL SUFFIX CASE 488 SC7 SQ SUFFIX CASE 49A UDFN.2x. MU SUFFIX CASE 7AA ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet. DEVICE MARKING INFORMATION See general marking information in the device marking section on page 4 of this data sheet. Semiconductor Components Industries, LLC, 2 April, 2 Rev. 8 Publication Order Number: NCS22/D

2 Table. COMPARATOR SELECTOR GUIDE Output Type Device Package Pinout Style Complementary NCS22AMUTG UDFN,.2x. N/A Complementary NCS22SNTG SOT23 Complementary NCV22SNTG* SOT23 Complementary NCS22SN2TG SOT23 2 Complementary NCV22SN2TG* SOT23 2 Complementary NCS22SQ2T2G SC7 2 Complementary NCV22SQ2T2G* SC7 2 Complementary NCS22SQLTG DFN, 2x2.2 N/A Open Drain NCS222SNTG SOT23 Open Drain NCS222SN2TG SOT23 2 Open Drain NCV222SN2TG* SOT23 2 Open Drain NCS222SQT2G SC7 Open Drain NCS222SQ2T2G SC7 2 Open Drain NCS222AMUTBG UDFN,.2 x. N/A *NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECQ Qualified and PPAP Capable. Output NonInverting Input 2 3 PIN CONNECTIONS V EE V EE Inverting NonInverting 3 Input Input Style Pinout (SNT) Output 4 Inverting Input Style 2 Pinout (SN2T, SQ2T2) Figure. SOT23 (NCS22, NCS222), SC7 (NCS22, NCS222) V EE 6 V OUT V EE 6 V OUT 2 NC NC 2 IN 3 4 IN+ IN 3 4 IN+ Top View Figure 2. DFN 2x2.2 (NCS22) Top View Figure 3. UDFN.2x. (NCS22A/NCS222A) 2

3 MAXIMUM RATINGS Rating Symbol Value Unit Supply Voltage Range ( to V EE ) V S 6. V Noninverting/Inverting Input to V EE V CM.2 to ( +.2) V Operating Junction Temperature T J C Operating Ambient Temperature Range NCS22, NCS222, NCS22A, NCS222A NCV22, NCV222 T A 4 to + 4 to +2 Storage Temperature Range T stg 6 to + C Output Short Circuit Duration Time (Note ) t S Indefinite s ESD Tolerance (Note 2) NCS22 Human Body Model Machine Model NCS222 Human Body Model Machine Model NCS22A Human Body Model Machine Model NCS222A Human Body Model all pins except output Human Body Model output pin Machine Model Thermal Resistance, JunctiontoAmbient TSOP DFN (Note 3) SC7 UDFN ESD HBM MM HBM MM HBM MM HBM HBM MM R JA Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.. The maximum package power dissipation limit must not be exceeded. PD T J(max) TA R JA 2. ESD data available upon request. 3. For more information, refer to application note, AND88/D. C V C/W 3

4 NCS22 ELECTRICAL CHARACTERISTICS (For all values =.8 V to 6. V, V EE = V,, unless otherwise noted.) (Note 4) Symbol Parameter Conditions Min Typ Max Unit V HYS Input Hysteresis mv V IO Input Offset Voltage =.8 V T A = T Low to T High (Note ) 2 = 3. V 6. T A = T Low to T High 8. = 6. V. T A = T Low to T High 7. V CM Common Mode Voltage Range V EE to V I LEAK Output Leakage Current = 6. V 3.3 na I SC Output ShortCircuit Sourcing or Sinking V out = GND 7 ma CMRR Common Mode Rejection Ratio V CM = 3 6 db I IB Input Bias Current. pa PSRR Power Supply Rejection Ratio V S = 2.7 V 4 db I CC Supply Current =.8 V T A = T Low to T High (Note ) 7 A... = 3. V T A = T Low to T High = 6. V T A = T Low to T High V OH Output Voltage High =.8 V, I source =. ma T A = T Low to T High (Note ).2.22 = 3. V, I source = 3. ma.2 T A = T Low to T High.2 = 6. V, I source =. ma.2 T A = T Low to T High.2 V OL Output Voltage Low =.8 V, I sink =. ma T A = T Low to T High (Note )..2.2 V EE +. = 3. V, I sink = 3. ma T A = T Low to T High V EE +.2 = 6. V, I sink =. ma V EE +.2 T A = T Low to T High V EE +.2 V EE +.22 V EE +.2 V EE +.2 V EE +.2 V EE +.2 t PHL Propagation Delay, HightoLow 2 mv Overdrive, C L = pf 8 ns t PLH Propagation Delay, LowtoHigh 2 mv Overdrive, C L = pf 9 ns t FALL Output Fall Time = 6. V, C L = pf 3 ns t RISE Output Rise Time = 6. V, C L = pf 8. ns t PU Powerup Time 3 s Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 4. The limits over the extended temperature range are guaranteed by design only.. NCS22: T Low = 4 C, T High = + C; NCV22: T Low = 4 C, T High = +2 C mv V V 4

5 NCS222 ELECTRICAL CHARACTERISTICS (For all values =.8 V to 6. V, V EE = V,, R pullup = k, unless otherwise noted.) (Note 6) Symbol Parameter Conditions Min Typ Max Unit V HYS Input Hysteresis mv V IO Input Offset Voltage =.8 V T A = T Low to T High (Note 7) 2 = 3. V 6. T A = T Low to T High 8. = 6. V. T A = T Low to T High 7. V CM Common Mode Voltage Range V EE to V I LEAK Output Leakage Current = 6. V 3.3 na I SC Output ShortCircuit Sourcing or Sinking V out = GND 7 ma CMRR Common Mode Rejection Ratio V CM = 3 6 db I IB Input Bias Current. pa PSRR Power Supply Rejection Ratio V S = 2.7 V 4 db I CC Supply Current =.8 V T A = T Low to T High (Note 7) 7 A... = 3. V T A = T Low to T High = 6. V T A = T Low to T High V OL Output Voltage Low =.8 V, I sink =. ma T A = T Low to T High (Note 7) V EE +. = 3. V, I sink = 3. ma T A = T Low to T High V EE +.2 = 6. V, I sink =. ma V EE +.2 T A = T Low to T High V EE +.2 V EE +.22 V EE +.2 V EE +.2 V EE +.2 V EE +.2 t PHL Propagation Delay, HightoLow 2 mv Overdrive, C L = pf ns t PLH Propagation Delay, LowtoHigh 2 mv Overdrive, C L = pf 8 ns t FALL Output Fall Time = 6. V, C L = pf 6. ns t RISE Output Rise Time = 6. V, C L = pf 26 ns t PU Powerup Time 3 s Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 6. The limits over the extended temperature range are guaranteed by design only. 7. NCS222: T Low = 4 C, T High = + C; NCV222: T Low = 4 C, T High = +2 C mv V

6 NCS22A ELECTRICAL CHARACTERISTICS (For all values =.8 V to 6. V, V EE = V,, unless otherwise noted.) (Note 8) Symbol Parameter Conditions Min Typ Max Unit V HYS Input Hysteresis mv V IO Input Offset Voltage =.8 V T A = 4 C to C = 3. V T A = 4 C to C = 6. V T A = 4 C to C V CM Common Mode Voltage Range V EE to V I SC Output ShortCircuit Sourcing or V out = GND 6 ma Sinking CMRR Common Mode Rejection Ratio V CM = 3 7 db I IB Input Bias Current. pa PSRR Power Supply Rejection Ratio V S = 2.7 V 4 8 db I CC Supply Current =.8 V T A = 4 C to C 7. 7 A = 3. V T A = 4 C to C = 6. V T A = 4 C to C V OH Output Voltage High =.8 V, I source =. ma T A = 4 C to C = 3. V, I source = 3. ma T A = 4 C to C = 6. V, I source =. ma T A = 4 C to C V OL Output Voltage Low =.8 V, I sink =. ma T A = 4 C to C = 3. V, I sink = 3. ma T A = 4 C to C = 6. V, I sink =. ma T A = 4 C to C t PHL Propagation Delay, HightoLow 2 mv Overdrive, C L = pf, V EE +. V EE +.2 V EE V EE +.2 V EE +.27 V EE +.3 V EE +.3 V EE +.3 V EE ns t PLH Propagation Delay, LowtoHigh = 2.8 V 7 ns t FALL Output Fall Time = 6. V, C L = pf (Note 9) 22 ns t RISE Output Rise Time = 6. V, C L = pf (Note 9) 2 ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 8. The limits over the extended temperature range are guaranteed by design only. 9. Input signal: khz, squarewave signal with ns edge rate. mv V V 6

7 NCS222A ELECTRICAL CHARACTERISTICS (For all values =.8 V to 6. V, V EE = V,, R pullup = k, unless otherwise noted.) (Note ) Symbol Parameter Conditions Min Typ Max Unit V HYS Input Hysteresis mv V IO Input Offset Voltage =.8 V T A = 4 C to C = 3. V T A = 4 C to C = 6. V T A = 4 C to C V CM Common Mode Voltage Range V EE to V I SC Output ShortCircuit Sourcing or V out = GND 6 ma Sinking CMRR Common Mode Rejection Ratio V CM = 3 8 db I IB Input Bias Current. pa PSRR Power Supply Rejection Ratio V S = 2.7 V 4 8 db I CC Supply Current =.8 V T A = 4 C to C 7. 7 A = 3. V T A = 4 C to C = 6. V T A = 4 C to C V OL Output Voltage Low =.8 V, I sink =. ma T A = 4 C to C = 3. V, I sink = 3. ma T A = 4 C to C = 6. V, I sink =. ma T A = 4 C to C t PHL Propagation Delay High to Low 2 mv Overdrive, C L = pf, = 2.8 V mv Overdrive, C L = pf, = 2.8 V mv Overdrive, C L = pf, = 2.8 V t PLH Propagation Delay Low to High 2 mv Overdrive, C L = pf, = 2.8 V mv Overdrive, C L = pf, = 2.8 V mv Overdrive, C L = pf, = 2.8 V t FALL Output Fall Time = 6. V, C L = pf (Note ) t RISE Output Rise Time = 6. V, C L = pf (Note ) V EE +.4 V EE +.8 V EE V EE +.2 V EE +.27 V EE +.3 V EE +.3 V EE +.3 V EE +.3 mv 8 ns 3 22 ns ns 23 ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.. The limits over the extended temperature range are guaranteed by design only.. Input signal: khz, squarewave signal with ns edge rate. V 7

8 I CC, SUPPLY CURRENT ( A) =. V I CC, SUPPLY CURRENT ( A) =. V = 2.7 V T A, AMBIENT TEMPERATURE ( C) Figure. NCS22 Series Supply Current versus Temperature FREQUENCY (khz) Figure 2. NCS22 Series Supply Current versus Output Transition Frequency I CC, SUPPLY CURRENT ( A) T A = 8 C T A = 4 C V OH, OUTPUT VOLTAGE HIGH STATE (mv). =. V , SUPPLY VOLTAGE (V) Figure 3. NCS22 Series Supply Current versus Supply Voltage.... I source, OUTPUT SOURCE CURRENT (ma) Figure 4. NCS22 Output Voltage High State versus Output Source Current V OL, OUTPUT VOLTAGE LOW STATE (mv). =. V.... I sink, OUTPUT SINK CURRENT, (ma) Figure. NCS22 Series Output Voltage Low State versus Output Sink Current V OL, OUTPUT VOLTAGE LOW STATE (mv) =. V I LOAD = 4. ma T A, AMBIENT TEMPERATURE ( C) Figure 6. NCS22 Series Output Voltage Low State versus Temperature 8

9 V OH, OUTPUT VOLTAGE HIGH STATE (mv) T A, AMBIENT TEMPERATURE ( C) =. V I LOAD = 4. ma PROPAGATION DELAY ( s) t PLH t PHL.2 =. V Input Overdrive = mv 2 2 T A, AMBIENT TEMPERATURE ( C) 7 Figure 7. NCS22 Series Output Voltage High State versus Temperature Figure 8. NCS22 Series Propagation Delay versus Temperature OUTPUT RESPONSE TIME (ns) Input Overdrive = mv t LH t HL, SUPPLY VOLTAGE (V) Figure 9. NCS22 Series Output Response Time versus Supply Voltage PROPAGATION DELAY ( s) t PLH t PHL = 2.7 V 2 INPUT OVERDRIVE (mv) Figure. NCS22 Series Propagation Delay versus Input Overdrive PROPAGATION DELAY ( s) t PLH t PHL 2 INPUT OVERDRIVE (mv) =. V 2 V/Div Output Input Overdrive = mv s/div Figure. NCS22 Series Propagation Delay versus Input Overdrive Figure 2. NCS22 Series Powerup Delay 9

10 V CM, INPUT COMMON MODE VOLTAGE RANGE (V) V S, SUPPLY VOLTAGE (V). 6. Figure 3. NCS22 Series Input Common Mode Voltage Range versus Supply Voltage I LEAK, OUTPUT LEAKAGE CURRENT (na) T A = 4 C T A = 8 C V OUT, OUTPUT VOLTAGE (V) Figure 4. NCS222 Output Leakage Current versus Output Voltage 4 INPUT BIAS CURRENT (pa) TEMPERATURE ( C) Figure. Input Bias Current versus Temperature

11 OPERATING DESCRIPTION The NCS22 Series is an industry first subone volt, low power comparator family. This series is designed for railtorail input and output performance. These devices consume only A of supply current while achieving a typical propagation delay of. s at a 2 mv input overdrive. Figures and show propagation delay with various input overdrives. This comparator family is guaranteed to operate at a low voltage of.8 V up to 6. V. This is accomplished by the use of a modified analog CMOS process that implements depletion MOSFET devices. The commonmode input voltage range extends. V beyond the upper and lower rail without phase inversion or other adverse effects. This series is available in the SOT23 package. Additionally, the NCS22 device is available in the tiny DFN 2x2.2 package and the SC7 package. NCS22A is available in UDFN package. Output Stage The NCS22 has a complementary P and N Channel output stage that has capability of driving a railtorail output swing with a load ranging up to. ma. It is designed such that shootthrough current is minimized while switching. This feature eliminates the need for bypass capacitors under most circumstances. The NCS222 has an open drain Nchannel output stage that can be pulled up to 6. V (max) with an external resistor. This facilitates mixed voltage system applications. IN (+) IN (+) Output Output IN () IN () V EE Figure 6. NCS22/NCS22A Complementary Output Configuration V EE Figure 7. NCS222/NCS222A Open Drain Output Configuration R x C x IN () NCS 22 IN (+) OUT V O R 2 R The oscillation frequency can be programmed as follows: f T 2.2 RxCx Figure 8. Schmitt Trigger Oscillator

12 M R t pf R 2 M IN () NCS 22 IN (+) OUT C V O t t R 3 The resistor divider R and R 2 can be used to set the magnitude of the input pulse. The pulse width is set by adjusting C and R 3. Figure 9. OneShot Multivibrator + V k +3 V R pullup IN () NCS k +3 V Logic Output 222 OUT IN (+) + V Logic Input This circuit converts V logic to 3 V logic. Using the NCS222/A allows for full V logic swing without creating overvoltage on the 3 V logic input. Figure 2. Logic Level Translator mv IN () NCS 22 IN (+) OUT Figure 2. ZeroCrossing Detector 2

13 ORDERING INFORMATION Device Pinout Style Output Type Package Shipping NCS22AMUTG N/A Complementary UDFN (PbFree) NCS22SNTG Complementary SOT23 (TSOP) (PbFree) NCV22SNTG* Complementary SOT23 (TSOP) (PbFree) NCS22SN2TG 2 Complementary SOT23 (TSOP) (PbFree) NCV22SN2TG* 2 Complementary SOT23 (TSOP) (PbFree) NCS22SQ2T2G 2 Complementary SC7 (PbFree) NCV22SQ2T2G* 2 Complementary SC7 (PbFree) NCS22SQLTG N/A Complementary DFN, 2x2.2 (PbFree) NCS222SNTG Open Drain SOT23 (TSOP) (PbFree) NCS222SN2TG 2 Open Drain SOT23 (TSOP) (PbFree) NCV222SN2TG* 2 Open Drain SOT23 (TSOP) (PbFree) NCS222SQT2G Open Drain SC7 (PbFree) NCS222SQ2T2G 2 Open Drain SC7 (PbFree) NCS222AMUTBG N/A Open Drain UDFN (PbFree) This device contains 93 active transistors. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8/D. *NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECQ Qualified and PPAP Capable. 3

14 MARKING DIAGRAMS SOT23 (TSOP) SN SUFFIX CASE 483 CAx AYW x = I for NCS22SNT J for NCS22SN2T M for NCS222SNT N for NCS222SN2T A = Assembly Location Y = Year W = Work Week = PbFree Package (Note: Microdot may be in either location) SC7 SQ SUFFIX CASE 49A CBx M CBx = Specific Device Code x = A for NCS22SQ2T2 D for NCS222SQT2G E for NCS222SQ2T2G M = Date Code* = PbFree Package (Note: Microdot may be in either location) *Date Code orientation, position, and underbar may vary depending upon manufacturing location. CB M DFN6 2x2.2 SQL SUFFIX CASE 488 CB M = Specific Device Code = Date Code* = PbFree Package (Note: Microdot may be in either location) *Date Code overbar and underbar may vary depending upon manufacturing location. x M UDFN6.2x. MU SUFFIX CASE 7AA x M (Top View) S for Specific Device Code V for NCS222A (V with 8 Rotation) = Date Code = PbFree Package 4

15 PACKAGE DIMENSIONS SOT23 / TSOP / SC9 SN SUFFIX CASE 4832 ISSUE K 2X 2X.2 NOTE T. B. A T B H G A TOP VIEW SIDE VIEW C D X.2 C A B S C SEATING PLANE J K DETAIL Z END VIEW M DETAIL Z NOTES:. DIMENSIONING AND TOLERANCING PER ASME Y4.M, CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED. PER SIDE. DIMENSION A.. OPTIONAL CONSTRUCTION: AN ADDITIONAL TRIMMED LEAD IS ALLOWED IN THIS LOCATION. TRIMMED LEAD NOT TO EXTEND MORE THAN.2 FROM BODY. MILLIMETERS DIM MIN MAX A 3. BSC B. BSC C.9. D.2. G.9 BSC H.. J..26 K.2.6 M S SOLDERING FOOTPRINT* SCALE : mm inches *For additional information on our PbFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.

16 PACKAGE DIMENSIONS DFN6, 2x2.2 SQL SUFFIX CASE 4883 ISSUE G 6X 2X. C. C PIN ONE REFERENCE. C 2X. C. C.8 C A B NOTE 3 b D ÍÍÍ ÍÍÍ ÍÍÍ TOP VIEW A SIDE VIEW DETAIL B 3 A3 A e A B E DETAIL A D2 C SEATING PLANE.4.6 NOTES:. DIMENSIONING AND TOLERANCING PER ASME Y4.M, CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN.2 AND.3mm FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS.. TERMINAL b MAY HAVE MOLD COMPOUND MATERIAL ALONG SIDE EDGE. 6. DETAILS A AND B SHOW OPTIONAL VIEWS FOR END OF TERMINAL LEAD AT EDGE OF PACKAGE AND SIDE EDGE OF PACKAGE. MILLIMETERS DIM MIN NOM MAX A.8.9. A..3. A3.2 REF b b D 2. BSC D E 2.2 BSC e.6 BSC L L... SOLDERING FOOTPRINT* L 6X L DETAIL A Bottom View (Optional) 6 EDGE OF PACKAGE 4 BOTTOM VIEW MOLD CMPD A b X. C. C ÉÉ DETAIL B Side View (Optional) A B NOTE 3 EXPOSED Cu A SCALE : *For additional information on our PbFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. 6

17 PACKAGE DIMENSIONS SC88A (SC7/SOT33) SQ SUFFIX CASE 49A2 ISSUE L S A G 4 B 2 3 D PL.2 (.8) M B M N NOTES:. DIMENSIONING AND TOLERANCING PER ANSI Y4.M, CONTROLLING DIMENSION: INCH A OBSOLETE. NEW STANDARD 49A2. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. INCHES MILLIMETERS DIM MIN MAX MIN MAX A B C D G.26 BSC.6 BSC H J K N.8 REF.2 REF S C J H K SOLDERING FOOTPRINT* SCALE 2: mm inches *For additional information on our PbFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. 7

18 PACKAGE DIMENSIONS UDFN6,.2x.,.4P CASE 7AA ISSUE D 2X X PIN ONE REFERENCE. C 2X. C.8 C. C L2 D ÉÉ ÉÉ TOP VIEW SIDE VIEW 3 A A B E (A3) X L A C L EXPOSED Cu A SEATING PLANE DETAIL A Bottom View (Optional) DETAIL B Side View (Optional) EDGE OF PACKAGE MOLD CMPD A3 NOTES:. DIMENSIONING AND TOLERANCING PER ASME Y4.M, CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN.2 AND.3 mm FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. MILLIMETERS DIM MIN MAX A.4. A.. A3.27 REF b..2 D.2 BSC E. BSC e.4 BSC L.3.4 L.. L2.4. MOUNTING FOOTPRINT* 6X.42 6X.22 6X b. C A B. C NOTE e BOTTOM VIEW.4 PITCH.7 DIMENSIONS: MILLIMETERS *For additional information on our PbFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC s product/patent coverage may be accessed at /site/pdf/patentmarking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 63, Denver, Colorado 827 USA Phone: or Toll Free USA/Canada Fax: or Toll Free USA/Canada orderlit@onsemi.com N. American Technical Support: Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: Japan Customer Focus Center Phone: ON Semiconductor Website: Order Literature: For additional information, please contact your local Sales Representative NCS22/D