Laboratories Profile
|
|
|
- Fay Dean
- 5 years ago
- Views:
Transcription
1 Laboratories Profile Electronics&Communication Engineering Section Yadavindra College of Engineering Punjabi University Guru Kashi Campus Talwandi Sabo (Bathinda) PUNJAB
2 DIGITAL ELECTRONIC CIRCUITS& MICROPROCESSOR APPLICATIONS LAB Faculty Incharge: Dr. Jagtar Singh, Professor Instructor: Er.Navdeep Singh Attendent: Mr. Sukhcharan Singh
3 INTRODUCTION This lab has been designed to make students acquainted with the designing of digital systems, and programmable aspects of microprocessors and microcontrollers. This lab is furnished with Universal Gates Demorgan s Theorem kit, Logic Gates & Digital Trainer Logic Kit, Digital IC Tester, Adders &Subtractors, Analog IC Tester, Digital Trainer Kit for Study of Flip-Flop, 4 Bit BCD Counter, 4 Bit Ripple Counter (N-counter ), 4 bit Up-Down Counter, 4 Bit Programmable Counter=1, 4 Bit Shift Register, Multiplexer, 8085 Trainer Kits, 8031/8051 Microcontroller Kit, ANSI C Compiler For All 8051 Family, Digital Signal Processor Trainer (Pl Dsp50-TMS320C5xx), USB Experimental Board, Bread Board Strips, ADC Interface Module for 8085 Microprocessor Kit, 8031/8051 Microcontroller Kit with LCD Display, Dual DAC Interface Module for Microprocessor 8085 Kit, Labview/Easy Lab Based Data Acquisition Modules, Stepper Motor Controller Interface Module, Microprocessor 8085 Kit, USB Interfaced Ultra High Speed Universal device programmer, Traffic Light Controller Card for 8085 microprocessor kit, Digital Logic Probes, Temperature Measurement card for 8085 Microprocessor Kit, DC Motor controller card for 8085 Microprocessor Kit, Bread Board (Digital Lab), Analog To Digital Converter, Digital To Analog Converter, Electronic work station model-3030 (Analog & Digital), Micro Controller Kit Advanced, Advance 8051 Trainer System, Keypad Interface 7 segment & LED display interface, Elevator Interface, Musical Tone Generator, Logic control interface, Relay Buzzer 8085 interface, CRO, Function Generator, Digital Multimeter. DIGITAL ELECTRONIC CIRCUITS & MICROPROCESSORS APPLICATION LAB LIST OF EQUIPMENT: Sr. No. Name of Equipment Quantity 1 Universal Gates Demorgan s Theorem 3 2 Logic Gates ME Digital Trainer Logic (ME 726B) 10 4 Digital IC Tester 1
4 5 Adders &Subtractors ME Analog IC Tester 1 7 Digital Trainer Kit for Study of Flip-Flop ME 702= Bit BCD Counter ME Bit Ripple Counter (N-counter Me 712) bit Up-Down Counter (Me 715=2) 4 Bit )Programmable Counter=1) Bit Shift Register Me Multiplexer Trainer Kits /8051 Microcontroller Kit 1 15 ANSI C Compiler For All 8051 Faimily 1 16 Digital Signal Processor Trainer (Pl Dsp50-TMS320C5xx) 1 17 USB Experimental Board ( K8055) 1 18 Bread Board Strips ADC Interface Module for 8085 Microprossesor Kit /8051 Microcontroller Kit with LCD Display 1 21 Dual DAC Interface Module for Microprocessor 8085 Kit (0800) 1 22 Labview/Dasylab/Easy Lab Based Data Acquisition Modules 1 23 Stepper Motor Controller Interface Module 06 Microprocessor 8085 Kit 1 24 USB Interfaced Ultra High Speed Universal device programmer 1 25 Traffic Light Controller card for 8085 microprocessor kit 1 26 Digital Logic Probes 4 27 Temperature Measurement card for 8085 microprocessor kit 1 28 DC Motor controller card for 8085 microprocessor kit 1 29 Bread Board (Digital Lab) ST Analog To Digital Converter ST Digital To Analog Converter ST Electronic work station model-3030(anlog& Digital) 1 33 Micro counteroler kit advanced 1 34 Advance 8051 Trainer System Keypad Interface 1
5 36 7 segment & LED display interface 1 37 Elevator Interface 1 38 Musical Tone Generator 1 39 Logic control interface 1 40 Relay Buzzer 8085 interface 1 41 CRO 3 42 FUNCTION GENRATOR 2 43 DIGITAL MULTI METER 2
6 ANALOG ELECTRONICSCIRCUITS & EDC LAB Faculty Incharge: Dr. AshwaniNarula, Associate Professor Instructor: Er.Navdeep Singh Attendent: Mr. Sukhcharan Singh
7 INTRODUCTION The goal of this lab is to give the students a practical experience in working with semiconductor devices and explore the design and operation of essential circuits that employ these devices. This lab aims at to provide Transistor Characteristics Apparatus, P-N Junction Diode Characteristics Apparatus, Energy Band Gap Apparatus for PN Junction Diode, Diode as Rectifier, Clipping Circuits, Clamping Circuits, FET Characteristics Apparatus, MOSFET Characteristic Apparatus, Push Pull Amplifier Kit, Audio Power Meter, BJT Amplifier and Emitter Follower Trainer, Two Stage RC Coupled Amplifier, Zener Diode Characteristics Trainer, Operational Amplifier Circuit Experimental Board( Mother Board & OP - Amp Daughter Board), DC Multipoint power supply, CRO, Function Generator, Digital Multimeter, Analog Multimeter. ANALOG ELECTRONICS CIRCUITS & EDC LAB LIST OF EQUIPMENT: Sr. No. Name of Equipment Quantity 1 Transistor Characteristics Apparatus 3 2 P-N Junction Diode Characteristics Apparatus 3 3 Energy Band Gap Apparatus for PN Junction Diode 3 4 Diode as Rectifier 3 5 Clipping Circuits 3 6 Clamping Circuits 3 7 FET Characteristics Apparatus 3 8 MOSFETCharacteristicApparatus 3 9 Push Pull Amplifier Kit 5 10 Audio Power Meter 1
8 11 BJT Amplifier and Emitter Follower Trainer 5 12 Two Stage RC Coupled Amplifier 1 13 Zener Diode Characteristics Trainer 3 14 Operational Amplifier Circuit Experimental Board( Mother Board & OP - 5 Amp Daughter Board) 15 DC Multipoint power supply 8 16 CRO 3 17 Function Generator 3 18 Digital Multimeter 3 19 Analog Multimeter 2
9 OPTICAL FIBER COMMUNICATION & MICROWAVE ENGINEERING LAB Faculty Incharge: Er. Sunita Rani, Assistant Professor Er. AshwaniSingla, Assistant Professor Attendent: Mrs. Gurmail Kaur
10 INTRODUCTION This lab provides students an opportunity to have a detailed practical study on microwave equipment s, optical devices and their application. Microwave Lab is equipped with following equipments: Klystron Based Microwave Test Bench, Gun Diode Based Microwave Bench, Elementary Fiber Optic Trainer Signal Channel Kit, Advanced Fiber Optic Trainer Kit, Laser Optics Trainer Kit, Basic Digital Link based Kit, Optical Power Meter, Basic Analog Link based Kit, Voice Transmitter/Receiver Trainer using Fiber Optic Cable, Cathode Ray Oscilloscopes (CRO), Function Generator, Digital Multimeter and Analog Multimeter. OPTICAL FIBER COMMUNICATION & MICROWAVE ENGINEERING LAB LIST OF EQUIPMENT: Sr. No. Name of Equipment Quantity 1 Klystron Based Microwave Test Bench 1 2 Gun Based Microwave Test Bench 1 3 Klystron Based with Various Anteena Microwave Test Bench 1 4 Microwave Bench Gun Based 1 5 Microwave Test Bench klystron Based 1 6 Elementary Fiber Optic Trainer Signal Ch. 1 7 Advanced Fiber Optic Trainer- Dual Ch. 1 8 Laser Optics Trainer 1 9 Basic Digital Link 1 10 Optical Power Meter 2
11 11 Basic Analog Link 1 12 Voice Transmitter/Receiver Trainer Using Fiber Optic Cable 1 13 Cathode Ray Oscilloscope(CRO) 3 14 Function Generator 3 15 Digital Multimeter 3 16 Analog Multimeter 2
12 COMMUNICATION SYSTEMS LAB Faculty Incharge: Er. Parminder SinghJassal, Assistant Professor Er. Candy Goel,Assistant Professor Attendent: Mr. Buta Singh
13 INTRODUCTION This lab consistsanalog - digital communication systems lab and Wireless & Mobile Communication Lab Analog - digital communication systems lab is intended to make students conversant with the techniques and instrumentation employed for measuring the performance and properties of digital communication systems and to provide practical experience with the components and sub-systems utilized in a digital communication system. Communication lab is equipped with PAM Modulator & Demodulator Kits Me-743, Amplitude Modulation & Demodulation Trainer Kit, Pulse Width Modulation & Demodulation Me 744, Frequency Modulation & Demodulation Trainer, Pulse Position Modulation & Demodulation ME 745, Balanced Modulator/DSB-SC Trainer, Study Of Adaptive Delta Modulation & Demodulation, DSB/SSB AM Transmitter Trainer, Analog Signal Sampling & Reconstruction, DSB/SSB AM Receiver Trainer, Frequency Division Multiplexer &Demultiplexer, Phase Modulation & Demodulation, TDM Pulse Code Modulation Transmitter Trainer, TDM Pulse Code Modulation Reciever Trainer, Data Formatting & Carrier Modulation Transmitter, Carrier Demodulation and Data Reformatting Receiver Trainer, TDM Pulse Amplitude Modulation/Demodulation Trainer Kit, ASK Modulation/Demodulation Kit, PSK Modulation/Demodulation Kit, FSK Modulation/Demodulation Kit, QPSK Modulation/Demodulation Kit, DPSK Modulation/Demodulation Kit, Motorised Antenna Trainer, Multiplexer/Demultiplexer Coder/Decoder Trainer Kit. ANALOG & DIGITAL COMMUNICATION SYSTEMS LAB
14 Wireless & mobile communication labis furnished with latest equipments related to design and implementation of wireless systems. GSM Trainer with Interface & Software, GPS Trainer, Mobile Phone Trainer, Microstrip Antenna Trainer. WIRELESS & MOBILE COMMUNICATION LAB LIST OF EQUIPMENT: Sr. No. Name of Equipment Quantity 1 CDMA-DSSS Trainer With Bermeas 1 2 GSM Trainer With Interface & Software 1 3 GPS Trainer 1 4 Mobile Phone Trainer 1 5 MicrostripAnteena Trainer 1 6 PAM Modulator & Demodulator Kits Me Amplitude Modulation & Demodulation Trainer 4 8 Pulse Width Modulation & Demodulation Me Frequency Modulation & Demodulation Trainer 4 10 Pulse Position Modulation & Demodulation ME Balanced Modulator/DSB-SC Trainer 1 12 Study Of Adaptive Delta Modulation & Demodulation 1 13 DSB/SSB AM Transmitter Trainer 1 14 Analog Signal Sampling & Reconstruction 1 15 DSB/SSB AM Receiver Trainer 1 16 Frequency Division Multiplexer &Demultiplexer 1
15 17 Phase Modulation & Demodulation 4 18 TDM Pulse Code Modulation Transmitter Trainer 1 19 TDM Pulse Code Modulation Reciever Trainer 1 20 Data Formatting & Carrier Modulation Transmitter 1 21 Carrier Demodulation And Data Reformatting Receiver Trainer 1 22 TDM Pulse Amplitude Modulation/Demodulation Trainer 1 23 ASK Modulation/Demodulation Kit 1 24 PSK Modulation/Demodulation Kit 1 25 FSK Modulation/Demodulation Kit 1 26 QPSK Modulation/Demodulation Kit 1 27 DPSK modulation/demodulation Kit 1 28 MotorisedAnteena Trainer 1 29 MULTIPLEXER/DEMULTIPLEXER. CODER/DECODR TRAINER 1 30 Cathode Ray Oscilloscope(CRO) 5 31 Function Generator 4 32 Digital Multimeter 3 33 Analog Multimeter 2 34 DSO 1
16 CIRCUIT THEORY & POWER ELECTRONICS ENGG. LAB Faculty Incharge: Er.GurpreetBharti Assistant Professor Instructor: Er. Pardeep Kumar Jindal Attendent: Mrs. Rajwinder Kaur
17 INTRODUCTION The purpose of this lab is to provide knowledge on power electronics & circuit theory and their applications in power and circuit engineering. Wein Bridge Oscillator kit, Phase Shift Oscillator, Thermistor/AD 590 Kit, Colpit Oscillator, Experiment Kit, Superposition Theorem Kit, Study of Hartley oscillator, SCR Single phase full wave fully controlled bridge rectifier trainer, Norton s theorem kit, Thevenin theorem kit, Maximum Power Transfer Theorem kit, Reciprocity theorem kit, Millman s theorem kit, Kirchoff s voltage law (KVL) trainer Kit, Kirchoff s current law (KCL) trainer kit, SCR phase control trainer, SCR based motor speed control trainer SCR triggering circuit trainer, Diac characteristics trainer, Diac and Triac based fan regulator trainer Kit, Diac and Triac based lamp control trainer Kit, SCR based JONE S Chopper, Thyristor Circuit Breaker With Current Limiting Trainer Kit, Triac Phase Control Trainer, DC Motor Speed Control Trainer Kit, Single Phase Dual Converter Trainer Kit, UJT Trainer Kit, SCR V-I Characteristic Trainer Kit, Triac Characteristic Trainer Kit, Variable Variac Auto Transformers Single Phase 2 amp, Cathode Ray Oscilloscope (CRO) Function Generator, Digital Multimeter, Analog Multimeter CIRCUIT THEORY & POWER ELECTRONICS ENGG. LAB LIST OF EQUIPMENT: Sr. No. Name of Equipment Quantity 1 Wein Bridge Oscillator 3 2 Phase Shift Oscillator 3 3 Therminster/ AD 590 Kit 1 4 Collpit Oscillator Experiment Kit 3 5 Superposition Theorem Kit AC N/W 3 6 Study of Hartley oscillator 4 7 SCR Singal phase full wave fully controlled bridge rectifier trainer 1 8 Norton s theorem kit AC N/W 4 9 Thevening s theorem kit AC N/W 4
18 10 Maximum power transfer theorem kit AC N/W 4 11 Reciprocity theorem kit AC N/W 4 12 Millman s theorem kit AC N/W 4 13 Kirchoff s voltage law (KVL) trainer kit 3 14 Kirchoff s current law (KCL) trainer kit 3 15 SCR phase control trainer 1 16 SCR based motor speed control trainer 1 17 SCR triggering circuit trainer 1 18 Diac characteristics trainer 1 19 Diac and traic based fan regulator trainer 1 20 Diac and traic based lamp control trainer 1 21 SCR based JONE S Chopper 1 22 Thyristor Circuit Breaker With Current Limiting Trainer 1 23 Traic Phase Control Trainer 1 24 DC Motor Speed Control Trainer 1 25 Single Phase Dual Converter Trainer 1 26 UJT Trainer 1 27 SCR V-I Characteristic Trainer 1 28 Traic Characteristic Trainer 1 29 Variable Variac Auto Transformers Single Phase 2 amp 2 30 Cathode Ray Oscilloscope (CRO) 5 31 Function Generator 3 32 Digital Multimeter 3 33 Analog Multimeter 2
19 MEASUREMENT SCIENCE & TECHNIQUES AND ELECTRONICS WORKSHOP LABS Faculty Incharge: Er. Jasbir Singh, Assistant Professor Dr. Yadwinder Kumar,Assistant Professor Attendent: Mrs. Rajwinder Kaur, Mrs. Gurmail Kaur
20 INTRODUCTION This lab provides an introduction to modern measurement techniques, data acquisition and use of different measuring instruments as it contains equipment s like Photo Cell Characteristics Apparatus, Strain Gauge Trainer, Electro Magnetic PICK- UP Based Speed Measurement Trainer, Temperature Transducer Trainer, Study of Piezo Electric Transducer, Study of Hall Effect Sensor, LVDT Trainer, Optical Transducer Trainer, Lod Cell Trainer, PLC (Programmable Logic Controller) with CPU/EEPROM/24 I/O Lines,Cathode Ray Oscilloscope (CRO), Function Generator, Digital Multimeter, Analog Multimeter, Soldering de-soldering pump. MEASUREMENT SCIENCE & TECHNIQUES AND ELECTRONICS WORKSHOP LABS LIST OF EQUIPMENT: Sr. No. Name of Equipment Quantity 1 Photo Cell Characteristics Apparatus 3 2 Strain Gauge Trainer 1 3 Electro Magnetic PICK- UP Based Speed Measurement Trainer 1 4 TemperatureTransducer Trainer 1 5 Study of Piezo Electric Transducer 1 6 Study of Hall Effect Sensor 1 7 LVDT Trainer 1
21 8 Optical Transducer Trainer 1 9 Load Cell Trainer 1 10 PLC(Programmable Logic Controller) withcpu/eeprom/24 I/O Lines 7 11 Cathode Ray Oscilloscope (CRO) 4 12 Function Generator 3 13 DigitaLMultimeter 3 14 Analog Multimeter 2 15 PCB Art Work Film Maker 1 16 PCB Curing Machine (OVEN) 1 17 Photo Resist Dip Coating Machine 1 18 Photo ETCH Etching Machine 1 19 Double Sided UV Exposure Unit 1 20 PCB Drilling Machine 1 21 PCB Shearing Machine 1 22 Roller Tinning Machine 1 23 Electronic Work Station 1 24 Digital Antistatic Soldering Station 1 25 Soldering Station Maintenance Centre 2 26 Digital AntistaticSoldering Station 5 27 Antistatic Soldering Station With Temperature Control 2
22 DIGITAL SYSTEM DESIGN & DIGITAL SIGNAL PROCESSING LAB Faculty Incharge: Dr. NavdeepGoel, Assistant Professor Technical Assistant: Er. Manpreet Singh Attendent: Mr. Sukhcharan Singh
23 INTRODUCTION This lab renders the services of software and hardware tools required for design and implementation of digital circuits, signal processing and image processing algorithms. This lab contains equipments like HP Desktop Computers with 17 inch TFT, CPLD Development Platform, Double conversion online UPS, VLSI development platform, DSP trainer kit (TMS 320-5X series), TMS 320 LF 2407, CCS based on DSP 5X series, MATLAB 7.4 Software & Tools, MULTISIM 10.0 Software, OPTISIM V5.1 Software, ORCAD Software with hardware key lock etc. DIGITAL SYSTEM DESIGN & DIGITAL SIGNAL PROCESSING LAB LIST OF MAJOR SOFTWARE AND HARDWARE: Sr. No. Software/Hardware Details Quantity 1 HP Desktop Computer HP Desktop Computer CPLD Development platform 1 4 Double conversion online UPS 1 5 VLSI development platform 1 6 DSP trainer kit (TMS 320-5X series) 5 7 TMS 320 LF CCS based on DSP 5X series 1 9 Mat Lab 7.4 Software & Tools 5 User License 10 Multisim 10.0 Software 10 Users License 11 Optisim V5.1 Software 5 Users License 12 Orcad Software with hard key lock 01
24
DIGITAL ELECTRONICS ANALOG ELECTRONICS
DIGITAL ELECTRONICS 1. N10 4 Bit Binary Universal shift register. 2. N22- Random Access Memory (16*4). 3. N23- Read Only Memory. 4. N4-R-S/D-T Flip flop, characteristic and comparison. 5. Master Slave
PRODUCT CATALOG TRAINER KITS FOR ENGINEERING DEGREE COURSES MICROTECH INDUSTRIES
PRODUCT CATALOG TRAINER KITS FOR ENGINEERING DEGREE COURSES µ MICROTECH INDUSTRIES 14A/ 1G, ULTADANGA ROAD GOPAL BHAVAN KOLKATA 700 004 Phone : (033) 3296 9273, Cell : 98312 63293 E- mail : hkg@cal3.vsnl.net.in
MICROPROCESSOR LAB DETAILS
ECE LAB - VIEW MICROPROCESSOR LAB DETAILS S.No Name of The Item Quantity Total Cost 1 8085 Microprocessor Trainer Kit 5 26,985 2 8086 Microprocessor Kit 5 30,200 3 8086 Microprocessor Trainer Kit (LED)
LABORATORIES MAJOR EQUIPMENT IN THE LABORATORIES
LABORATORIES Department is Equipped with the following Laboratories Electronic Devices Lab Electronic Circuits Analysis Lab Analog Communications/ Digital Communications Lab DECS Lab R & D Lab Microwave
This laboratory is intended for performing laboratory exercises and the mini projects for subjects like analog electronic devices & circuits and analo
The basic electronics laboratory is utilized for performing experiments related to fundamentals of Electronics Engineering subject common to all first year under graduate students of the college. This
Xeltronix.
+91-8048720001 Xeltronix https://www.indiamart.com/xeltronix/ Reckoned firms engaged in manufacturing and supplying a quality array of Electronic Trainer Kits, we ensure that our products would serve the
LABORATORIES-ECE. Microprocessor & Microcontroller Lab - Srinivasa Ramanujan Lab
LABORATORIES-ECE Microprocessor & Microcontroller Lab - Srinivasa Ramanujan Lab Students are given extensive training in 16 bit microprocessors and micro controllers in this laboratory. Individual attention
LABORATORIES-ECE. Sir Srinivasa Ramanujan - Microprocessor & Microcontroller Laboratory
LABORATORIES-ECE Sir Srinivasa Ramanujan - Microprocessor & Microcontroller Laboratory Students are given extensive training in 16 bit microprocessors and micro controllers in this laboratory. Individual
Logic Gates & Training Boards
Logic Gates & Training Boards ANALOG TO DIGITAL (A/D) CONVERTOR (ELP.112.140) Objective : To study Analog to Digital & Digital to Analog convertors using R-2R network & Successive Approximation Method.
Computer Science and Engineering & Information and Communication Technology
Computer Science and Engineering & Information and Communication Technology Sr.No. Laboratory Name 1 ICT LAB1 Computer Programming Lab 1 3 Computer Network & Sensors Lab ICT LAB 1 Detailed list of instruments:
UPSC Electrical Engineering Syllabus
UPSC Electrical Engineering Syllabus UPSC Electrical Engineering Syllabus PAPER I 1. Circuit Theory: Circuit components; network graphs; KCL, KVL; circuit analysis methods: nodal analysis, mesh analysis;
Deficiency (R - A) Sl. No. (A) (R) 7. Pspice / Matlab /other Equivalent software Package) with PC Single Phase Wattmeter
(R 03) Semester II EE6 Electric Circuits Laboratory.. 3. 4. 5. 6. Regulated Power Supply: 0 5 V D.C Function Generator ( MHz) Single Phase Energy Meter Oscilloscope (0 MHz). Digital Storage Oscilloscope
Preface... iii. Chapter 1: Diodes and Circuits... 1
Table of Contents Preface... iii Chapter 1: Diodes and Circuits... 1 1.1 Introduction... 1 1.2 Structure of an Atom... 2 1.3 Classification of Solid Materials on the Basis of Conductivity... 2 1.4 Atomic
S.No. Items Price EI N MICROPROCESSOR TRAINER KIT EI N MICROPROCESSOR TRAINER KIT
Website:- www.oneshopschool.com R. K. S o l u t i o n s Email:- info@oneshopschool.com Electronics EI N01 8085 MICROPROCESSOR TRAINER KIT 10000.00 EI N02 8086 MICROPROCESSOR TRAINER KIT 14000.00 EI N03
CATALOG. ANALOG COMMUNICATION SYSTEMS DIGITAL COMMUNICATION SYSTEMS Microcontroller kits Arm controller kits PLC Trainer KITS Regulated Power supplies
CATALOG ANALOG COMMUNICATION SYSTEMS DIGITAL COMMUNICATION SYSTEMS Microcontroller kits Arm controller kits PLC Trainer KITS Regulated Power supplies UNION INTRUMENTS #17 & 18, 4 th floor, Hanumathra Arcade
Established in the year 2005, we "Kitek
+91-8048762803 Kitek Technologies Private Limited http://www.ictester.in/ Established in the year 2005, we "Kitek Technologies Private Limited" are the manufacturer, wholesaler and exporter of Digital
Devices and Op-Amps p. 1 Introduction to Diodes p. 3 Introduction to Diodes p. 4 Inside the Diode p. 6 Three Diode Models p. 10 Computer Circuit
Contents p. v Preface p. ix Devices and Op-Amps p. 1 Introduction to Diodes p. 3 Introduction to Diodes p. 4 Inside the Diode p. 6 Three Diode Models p. 10 Computer Circuit Analysis p. 16 MultiSIM Lab
Quantity available (A) Quantity required (R) Sl. No. Deficiency (R - A) Description of Equipment
. 2. 3. 4. 5. 6. (R 203) Semester II EE62 Electric Circuits Laboratory Regulated Power Supply: 0 5 V D.C Function Generator ( MHz) Single Phase Energy Meter Oscilloscope (20 MHz). Digital Storage Oscilloscope
i Intelligent Digitize Emulated Achievement Lab
Electronics Circuits Equipment Intelligent Digitize Emulated Achievement Lab intelligent digitize emulated achievement lab is a digitized-based training system, which utilizes integrated Hardware Platform,
10. RESOURCE REQUIREMENT
149 10. RESOURCE REQUIREMENT 10.1 PHYSICAL RESOURCES (A) (B) Space requirement Norms and standards laid down by All India Council for Technical Education (AICTE) are to be followed to work out space requirement
RESOURCE REQUIREMENT
RESOURCE REQUIREMENT 9.1 PHYSICAL RESOURCES 9.1.1 Space requirement Norms and standards laid down by All India Council for Technical Education (AICTE) are to be followed to work out space requirement in
M.D. Singh J.G. Joshi MECHATRONICS
M.D. Singh J.G. Joshi MECHATRONICS MECHATRONICS MECHATRONICS M.D. SINGH Formerly Principal Sagar Institute of Technology and Research Bhopal J.G. JOSHI Lecturer Department of Electronics and Telecommunication
ELECTRICAL ENGINEERING (CODE NO. 10) PAPER - I
ELECTRICAL ENGINEERING (CODE NO. 10) PAPER - I 1. Circuit theory Circuit Components, Network graphs, KCL, KVL, Circuit analysis methods: Nodal analysis, mesh analysis, basic network theorems; transient
ETEK TECHNOLOGY CO., LTD. To Be One of Best Manufacturers at Electronics and Communication Trainers Around the World.
ETEK TECHNOLOGY CO., LTD To Be One of Best Manufacturers at Electronics and Communication Trainers Around the World. ETEK Products Profile I. Digital and Analog Communications II. RF and Microwave Circuits
LESSON PLAN. Sub Code & Name: ME2255 Electronics and Microprocessors Unit : I Branch : ME Semester: IV UNIT I SEMICONDUCTORS AND RECTIFIERS 9
Unit : I Branch : ME Semester: IV Page 01 of 06 UNIT I SEMICONDUCTORS AND RECTIFIERS 9 Classification of solids based on energy band theory - Intrinsic semiconductors - Extrinsic semiconductors - P type
V-LAB COMPUTER INTERFACED TRAINING SET
is an important tool for Vocational Education with it s built-in measurement units and signal generators that are interfaced with computer for control and measurement. is a device for real-time measurement
UNIVERSITY OF CALICUT
File Ref.No.25479/GA - IV - J2/2013/CU UNIVERSITY OF CALICUT Abstract VOCATIONAL COURSE in Physics-ADVANCED DIPLOMA COURSE IN ELECTRICAL, ELECTRONICS AND INSTRUMENTATION-Scheme and Syllabus- Approved -Implemented-w.e.f
UNIVERSITY OF NAIROBI COLLEGE OF BIOLOGICAL AND PHYSICAL SCIENCES FACULTY OF SCIENCE SPH 307 INTRODUCTORY ELECTRONICS
UNIVERSITY OF NAIROBI COLLEGE OF BIOLOGICAL AND PHYSICAL SCIENCES FACULTY OF SCIENCE SPH 307 INTRODUCTORY ELECTRONICS Dr. Kenneth A. Kaduki Department of Physics University of Nairobi Reviewer: Prof. Bernard
R & D Electronics DIGITAL IC TRAINER. Model : DE-150. Feature: Object: Specification:
DIGITAL IC TRAINER Model : DE-150 Object: To Study the Operation of Digital Logic ICs TTL and CMOS. To Study the All Gates, Flip-Flops, Counters etc. To Study the both the basic and advance digital electronics
DC/AC CIRCUITS: CONVENTIONAL FLOW TEXTBOOKS
4 PEARSON CUSTOM ELECTRONICS TECHNOLOGY DC/AC CIRCUITS: CONVENTIONAL FLOW TEXTBOOKS AVAILABLE MARCH 2009 Boylestad Introductory Circuit Analysis, 11/e, 0-13-173044-4 Introduction 32 LC4501 Voltage and
List of Lab Equipment
List of Lab Equipment COMMUNICATION ENGINEERING LAB S. No. Name of Equipment / Device Quantity 1. CRO Dual Trace 0-250 MHz 1 2. CRO 30 MHz 5 3. 415 10MHz Function Generator 2 4. Servo Stabilizer 1 5. 402
SEMESTER SYSTEM, A. PROPOSED SCHEME FOR B.Sc. ELECTRONICS (PASS) COURSE. B.Sc. (ELECTRONICS MAINTENANCE) COURSE
SEMESTER SYSTEM, 2010-2013 A PROPOSED SCHEME FOR B.Sc. ELECTRONICS (PASS) COURSE B.Sc. (ELECTRONICS MAINTENANCE) COURSE CLASS/ SEMESTER Sem -I Sem-II B. Sc (Elex) B. Sc (Elex. Maint) EL-1101 Components
TEACHING & EXAMINATION SCHEME For the Examination 2015 ELECTRONICS. B.Sc. Part - I
TEACHING & EXAMINATION SCHEME For the Examination 2015 ELECTRONICS THEORY B.Sc. Part - I Elec. 101 Paper I Circuit Elements and Networks Pd/W Exam. Max. (45mts.) Hours Marks 150 2 3 50 Elec. 102 Paper
RECRUITMENT FOR THE POSTS OF SUB DIVISIONAL ENGINEERS (ELECTRICAL) IN THE DEPARTMENT OF PUBLIC WORKS (B&R), GOVT. OF PUNJAB
PUNJAB PUBLIC SERVICE COMMISSION BARADARI GARDENS, PATIALA-147001 Website: www.ppsc.gov.in RECRUITMENT FOR THE POSTS OF SUB DIVISIONAL ENGINEERS (ELECTRICAL) IN THE DEPARTMENT OF PUBLIC WORKS (B&R), GOVT.
CIRCUIT ANALYSIS LAB. List of Experiments (Electrical & Electronics Engineering)
CIRCUIT ANALYSIS LAB List of Experiments (Electrical & Electronics Engineering) Verification of principle of superposition with dc and ac Sources. Verification of Thevenin, Norton's theorems in ac circuits.
WINTER 14 EXAMINATION
Subject Code:173 WINTER 14 EXAMINATION Model Answer Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2) The
Scheme & Syllabus. New B.Sc. Electronics (Pass /Maintenance) Course I to VI Semester. w.e.f. July w.e.f Batch Onwards
Scheme & Syllabus of New B.Sc. Electronics (Pass /Maintenance) Course I to VI Semester w.e.f. July 2011 Devi Ahilya Vishwavidyalaya, Indore (M.P.), 452001 SEMESTER SYSTEM, 2011-2014 PROPOSED SCHEME FOR
Ohm Technologiees.
+91-8048706704 Ohm Technologiees https://www.ohmtechnologiees.com/ Our company is engaged in manufacturing, supplying and importing the most sought after range Scientific Electronic Equipment. These products
Appendix B. EE Course Description (lecture, laboratory, credit hour)
Appendix B EE Course Description (lecture, laboratory, credit hour) EE 200 - Digital Logic Circuit Design (3-3-4) Number systems & codes. Logic gates. Boolean Algebra. Karnaugh maps. Analysis and synthesis
ANALOG/BASIC ELECTRONICS LAB.
ANALOG/BASIC ELECTRONICS LAB. CHARACTERISTICS S.N. Item Model No. Following kits are designed on Glass Epoxy PCB with easily replaceable components & schematic printed on Top. Housed in Pine wood good
Laboratory Facilities
1.1 Electrical Machine Lab I & II The Electrical Machine Laboratory-I & II are two labs housed in two different Lab rooms at 5 th floor of the UAP City Campus. Adequate number of equipment s and machineries
Scheme & Syllabus. New. B.Sc. Electronics. (Pass /Maintenance) Course. I st to IV th Semester. w.e.f. July Devi Ahilya Vishwavidyalaya,
Scheme & Syllabus of New B.Sc. Electronics (Pass /Maintenance) Course I st to IV th Semester w.e.f. July 2011 Devi Ahilya Vishwavidyalaya, Indore (M.P.) 452001 SEMESTER SYSTEM, 2011-2014 PROPOSED SCHEME
Careers in Electronics Using a Calculator Safety Precautions Dc Circuits p. 1 Fundamentals of Electricity p. 3 Matter, Elements, and Compounds p.
Preface p. vii Careers in Electronics p. xii Using a Calculator p. xvi Safety Precautions p. xix Dc Circuits p. 1 Fundamentals of Electricity p. 3 Matter, Elements, and Compounds p. 4 A Closer Look at
TAMIL NADU PUBLIC SERVICE COMMISSION. Post of Principal / Assistant Director (Training) Included in the Tamil Nadu Employment and Training Service
Code No.207 TAMIL NADU PUBLIC SERVICE COMMISSION Post of Principal / Assistant Director (Training) Included in the Tamil Nadu Employment and Training Service Electronics and Instrumentation Engineering
NORTH MAHARASHTRA UNIVERSITY, JALGAON
, JALGAON Syllabus for F.Y.B.Sc. Semester I and II ELECTRONICS (w. e. f. June 2012) F.Y. B. Sc. Subject Electronics Syllabus Structure Semester Code Title Number of Lectures ELE-111 Paper I : Analog Electronics
LIST OF TRAINING MODULES
LIST OF TRAINING MODULES S.NO. TYPE SECTION-A (CHARACTERISTICS) 1. Diode & Zener Diode Characteristics EE-1 2. Tunnel Diode Characteristics EE-P50 3. L.E.D. Characteristics EE-2 4. Transistor Characteristics
CRN: MET-487 Instrumentation and Automatic Control June 28, 2010 August 5, 2010 Professor Paul Lin
CRN: 32030 MET-487 Instrumentation and Automatic Control June 28, 2010 August 5, 2010 Professor Paul Lin Course Description: Class 2, Lab 2, Cr. 3, Junior class standing and 216 Instrumentation for pressure,
ETE 112. Structured Programming Laboratory
ETE 112 Structured Programming Laboratory Lab module 1: Basic Programming with Mathematical expression. Experiment no.1: Write a C program which will print your name, ID, Sept and University name on the
Physical electronics, various electronics devices, ICs form the core of Electronics and Telecommunication branch. This part includes
Paper-1 Syllabus for Electronics & Telecommunication Engineering: This part is for both objective and conventional type papers: 1) Materials and Components Materials and Components are the vertebral column
Department of Mechatronics Engineering
Department of Mechatronics Engineering COURSES COVERED CONTROL SYSTEM POWER ELECTRONICS ELECTROMECHANICAL SYSTEM SENSORS AND INTRUMENTATION LAB SUPERVISOR: ENGR. MOEZ UL HASSAN NI ELVIS II The NI Educational
DIGITAL COMMUNICATIONS LAB
DIGITAL COMMUNICATIONS LAB List of Experiments: 1. PCM Generation and Detection. 2. Differential Pulse Code modulation. 3. Delta modulation. 4. Time Division Multiplexing of 2band Limited Signals. 5. Frequency
FACET Electronics Training System LabVolt Series
FACET Electronics Training System LabVolt Series Datasheet Festo Didactic en 08/2018 Table of Contents General Description 2 1) Base Units 4 2) Boards 5 3) Courseware 6 4) Instruments 6 5) Optional Equipment
Brief Course Description for Electrical Engineering Department study plan
Brief Course Description for Electrical Engineering Department study plan 2011-2015 Fundamentals of engineering (610111) The course is a requirement for electrical engineering students. It introduces the
GR14 COURSE OUTCOMES ECE BOS
S. No. Category Course Code Course Title BOS 1 ES GR14A1019 Fundamentals of Electronics Engineering ECE 2 ES GR14A2043 Digital Electronics ECE 3 ES GR14A2047 Electrical Circuits ECE 4 ES GR14A2048 Electronic
Index. n A. n B. n C. Base biasing transistor driver circuit, BCD-to-Decode IC, 44 46
Index n A Android Droid X smartphone, 165 Arduino-based LCD controller with an improved event trigger, 182 with auto-adjust contrast control, 181 block diagram, 189, 190 circuit diagram, 187, 189 delay()
GCSE Electronics. Scheme of Work
GCSE Electronics Scheme of Work Week Topic Detail Notes 1 Practical skills assemble a circuit using a diagram recognize a component from its physical appearance (This is a confidence building/motivating
S-[F] NPW-02 June All Syllabus B.Sc. [Electronics] Ist Year Semester-I & II.doc - 1 -
![S-[F] NPW-02 June All Syllabus B.Sc. [Electronics] Ist Year Semester-I & II.doc - 1 -](/thumbs/79/79759849.jpg "S-[F] NPW-02 June All Syllabus B.Sc. [Electronics] Ist Year Semester-I & II.doc - 1 -")
- 1 - - 2 - - 3 - DR. BABASAHEB AMBEDKAR MARATHWADA UNIVERSITY, AURANGABAD SYLLABUS of B.Sc. FIRST & SECOND SEMESTER [ELECTRONICS (OPTIONAL)] {Effective from June- 2013 onwards} - 4 - B.Sc. Electronics
List of Experimental Set-up
List of Experimental Set-up For Batch 2011 and onwards LAB- (ANALOG DEVICES & CIRCUITS) 1. Study of Zener regulator as voltage regulator 2. Study of Half wave, full wave & Bridge rectifiers. 3. To plot
Downloaded from Downloaded from
IV SEMESTER FINAL EXAMINATION-2002 The figure in the margin indicates full marks. [i] (110111) 2 = (?) 16 [ii] (788) 10 = (?) 8 Q. [1] [a] Explain the types of extrinsic semiconductors with the help of
ELECTRONICS WITH DISCRETE COMPONENTS
ELECTRONICS WITH DISCRETE COMPONENTS Enrique J. Galvez Department of Physics and Astronomy Colgate University WILEY John Wiley & Sons, Inc. ^ CONTENTS Preface vii 1 The Basics 1 1.1 Foreword: Welcome to
Unit/Standard Number. LEA Task # Alignment
1 Secondary Competency Task List 100 SAFETY 101 Demonstrate an understanding of State and School safety regulations. 102 Practice safety techniques for electronics work. 103 Demonstrate an understanding
NORTH MAHARASHTRA UNIVERSITY. F.Y. B. Sc. Electronics. Syllabus. Wieth effect from june2015
Syllabus Wieth effect from june2015 Paper- I, Semester I ELE-111: Analog Electronics I Unit- I:Introduction to Basic Circuit Components Definition and unit, Circuit Symbol, Working Principle, Classification
DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING
KINGS COLLEGE OF ENGINEERING PUNALKULAM. DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING QUESTION BANK SUBJECT CODE : EE1152 SEM / YEAR : II / I SUBJECT NAME : ELECTRIC CIRCUITS AND ELECTRON DEVICES
IT.MLD900 SENSORS AND TRANSDUCERS TRAINER. Signal Conditioning
SENSORS AND TRANSDUCERS TRAINER IT.MLD900 The s and Instrumentation Trainer introduces students to input sensors, output actuators, signal conditioning circuits, and display devices through a wide range
Assignment-1(Unit-1)
Assignment-1(Unit-1) Q.1 A half wave rectifier circuit connected to a 230 V,50Hz source through a transformer of turn ratio of 10:1.The rectifier circuit is to supply power to a 500Ω,1 watt resistor &
Introduction to Simulation using EDWinXP
Introduction to Simulation using EDWinXP Introduction to Simulation using EDWinXP First Edition Copyright Notice ALL RIGHTS RESERVED. Any unauthorized reprint or use of this material is prohibited. No
COURSE OUTCOMES OF HPTU EVEN SEMESTER SUBJECTS OF ECE BRANCH
Jawaharlal Nehru Government Engineering College Sundernagar, Himachal Pradesh 175018 Email: jngechp@yahoo.co.in COURSE OUTCOMES OF HPTU EVEN SEMESTER SUBJECTS OF ECE BRANCH Semester 2 EE-101 Principles
Multiple Instrument Station Module
Multiple Instrument Station Module Digital Storage Oscilloscope Vertical Channels Sampling rate Bandwidth Coupling Input impedance Vertical sensitivity Vertical resolution Max. input voltage Horizontal
Osmania University B.Sc Electronics - Syllabus (under CBCS w.e.f ) I ST and II nd Year
Osmania University B.Sc Electronics - Syllabus (under CBCS w.e.f 2016-2017) I ST and II nd Year UNIT - I B.Sc. ELECTRONICS SYLLABUS B.Sc. I YEAR Semester - I DSC- Paper I : Circuit Analysis Total number
Subject-wise Tests Tests will be activated at 06:00 pm on scheduled day
Subject Name EE-01 Control Systems EE-02 Systems and Signal Processing EE-03 Analog and Digital Electronics EE-04 Engineering Mathematics and Numerical Analysis EE-05 Electric Circuits and Fields EE-06
Paper No. Name of the Paper Theory marks Practical marks Periods per week Semester-I I Semiconductor
Swami Ramanand Teerth Marathwada University, Nanded B. Sc. First Year Electronics Syllabus Semester system (To be implemented from Academic Year 2009-10) Name of the Theory marks Practical marks Periods
Acknowledgments Introduction
Acknowledgments Introduction xiii xi 1 Electronic meters 1 1.1 Digital meters 2 1.2 Nondigital (analog) meters 6 1.3 Differential meters 14 1.4 Digital meter displays and ranges 16 1.5 Nondigital meter
DAV Institute of Engineering & Technology Department of ECE. Course Outcomes
DAV Institute of Engineering & Technology Department of ECE Course Outcomes Upon successful completion of this course, the student will intend to apply the various outcome as:: BTEC-301, Analog Devices
DEGREE: BACHELOR IN INDUSTRIAL ELECTRONICS AND AUTOMATION YEAR: 2ND TERM: 2ND
SESSION WEEK COURSE: ELECTRONICS ENGINEERING FUNDAMENTALS DEGREE: BACHELOR IN INDUSTRIAL ELECTRONICS AND AUTOMATION YEAR: 2ND TERM: 2ND The course has 29 sessions distributed during 15 weeks. The duration
GOVERNMENT POLYTECHNIC, KHAMGAON QUOTATION
GOVERNMENT POLYTECHNIC, KHAMGAON WINNER OF ISTE-NARSEE-MONJEE AWARD-2000 (07263) 56644 (O), 54609 (R), Fax - (07263) 52278 E-mail: gpolykhamgaon@rediffmail.com Gram: - POLYTECH No. : GPK/EQP/inst purchase/etx_list-a/2018-19/3256
DEPARTMENT OF PHYSICS PHYS*2040 W'09. Fundamental Electronics and Sensors. Lecturer: Dr. Ralf Gellert MacN 450 Ext
DEPARTMENT OF PHYSICS PHYS*2040 W'09 Fundamental Electronics and Sensors Lecturer: Dr. Ralf Gellert MacN 450 Ext. 53992 ralf@physics.uoguelph.ca Lab Instructor: Andrew Tersigni MacN 023 Ext. 58342 andrew@physics.uoguelph.ca
BASIC ELECTRICAL LAB EQUIPMENTS
BASIC ELECTRICAL LAB EQUIPMENTS S No. Name of the Equipment Qty Model/Specification Superposition theorem kit(s) 0 Jupiter Norton's theorem kit(s) 0 Jupiter 3 Thevenin theorem kit(s) 0 Jupiter 4 Maximum
VIDYAVARDHAKA COLLEGE OF ENGINEERING
COURSE OUTCOMES OF 15 SCHEME SUBJECTS : 15MAT31 : C201 : Engg. Mathematics III CO1. Apply periodic signals and Fourier series to analyse circuits and system communications and develop Fourier series for
Electronic Components And Circuit Analysis
Theory /Practical Theory Semester /Annual Semester Semester No. I II Swami Ramanand Teerth Marathwada University, Nanded Syllabus B. Sc. First Year ELECTRONICS Semester System (MCQ Pattern) (To Be Implemented
"Education for Knowledge, Science and Culture" - Shikshanmaharshi Dr. Bapuji Salunkhe Shri Swami Vivekanand Shikshan Sanstha's
"Education for Knowledge, Science and Culture" - Shikshanmaharshi Dr. Bapuji Salunkhe Shri Swami Vivekanand Shikshan Sanstha's VIVEKANAND COLLEGE (AUTONOMOUS), KOLHAPUR. B. Sc. Part I CBCS Syllabus with
Calhoon MEBA Engineering School. Study Guide for Proficiency Testing Industrial Electronics
Calhoon MEBA Engineering School Study Guide for Proficiency Testing Industrial Electronics January 0. Which factors affect the end-to-end resistance of a metallic conductor?. A waveform shows three complete
CODE NO DESCRIPTION MAKE DUAL TRACE ANALOG 20 MHZ WITH PROBE BEETECH DUAL TRACE ANALOG 30 MHZ WITH PROBE BEETECH
CODE NO DESCRIPTION MAKE CATHODE RAY OSCILLOSCOPE UNIT PRICE FUNCTION GENERATOR DUAL TRACE ANALOG 20 MHZ WITH PROBE BEETECH 12100.00 DUAL TRACE ANALOG 30 MHZ WITH PROBE BEETECH 13750.00 UFG - 801 Sine
The University of Burdwan Syllabus for B.Sc. General (1+1+1 Pattern) in Electronics with effect from
The University of Burdwan Syllabus for B.Sc. General (1+1+1 Pattern) in Electronics with effect from 2014-2015 STRUCTURE OF THE SYLLABUS (w.e.f. 2014-15 onwards) PAPER I (Theoretical) Full Marks: 100 Section
Course Title: Electronic Practice (Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM Course Title: Electronic Practice (Code: 3312401) Diploma Programmes in which this course is offered Mechatronics Engineering Semester
DEPARTMENT OF ELECTRONICS
DEPARTMENT OF ELECTRONICS Academic Planner for odd Semesters Semester : I Subject : Electronics(ELT1). Course: B.Sc. (PME) Introduction to Number systems B Construction and types, working Review of P type
Electrical Materials may be referred to a metal, dielectrics,electrical insulators or conductors,paramagnetic materials and many other.
Electrical Engineering Paper-1 Syllabus : This part is for both objective and conventional types papers : 1) EM Theory- The electromagnetic force is said to be one of the fundamental interactions in nature
Associate In Applied Science In Electronics Engineering Technology Expiration Date:
PROGRESS RECORD Study your lessons in the order listed below. Associate In Applied Science In Electronics Engineering Technology Expiration Date: 1 2330A Current and Voltage 2 2330B Controlling Current
PESIT - BANGALORE SOUTH CAMPUS PART A
PESIT - BANGALORE SOUTH CAMPUS LESSON - PLAN FOR BASIC ELECTRONICS ENGG. Name of Faculty: Percentage of course Periods Reference/ Text books Topics covered Reference chapter covered Cumulative PART A Unit
UNIT I PN JUNCTION DEVICES
UNIT I PN JUNCTION DEVICES 1. Define Semiconductor. 2. Classify Semiconductors. 3. Define Hole Current. 4. Define Knee voltage of a Diode. 5. What is Peak Inverse Voltage? 6. Define Depletion Region in
Gujarat University B. Sc. Electronics Semester I: ELE (Effective from: )
Unit - I: Components and Instrumentation: Gujarat University B. Sc. Electronics Semester I: ELE - 101 Passive Circuit devices: Resistors, nonlinear resistors, inductors, types of inductors, capacitors,
BE Assignment. (1) Explain Active component and Passive component in Detail. (1) Explain practical voltage source and ideal voltage source.
BE Assignment chapter-1 (1) Explain Active component and Passive component in Detail. (1) Explain practical voltage source and ideal voltage source. (2) Explain practical current source and ideal current
AReS (All-in-One Real time Instrumentation & Educational System)
AReS (All-in-One Real time Instrumentation & Educational System) Smart Trainer FEATURES All-in-one smart learning platform designed for technical education Embedded Microsoft Operating System (OS) for
Number of Lessons:155 #14B (P) Electronics Technology with Digital and Microprocessor Laboratory Completion Time: 42 months
PROGRESS RECORD Study your lessons in the order listed below. Number of Lessons:155 #14B (P) Electronics Technology with Digital and Microprocessor Laboratory Completion Time: 42 months 1 2330A Current
Electrical, Electronic and Communications Engineering Technology/Technician CIP Task Grid
Secondary Task List 100 SAFETY 101 Describe OSHA safety regulations. 102 Identify, select, and demonstrate proper hand tool use for electronics work. 103 Recognize the types and usages of fire extinguishers.
UNIVERSITY OF CALICUT (INSTITUTE OF ENGINEERING AND TECHNOLOGY) IET/A/EE/Purchase/2009. Thenhipalam P.O. Dated
UNIVERSITY OF CALICUT (INSTITUTE OF ENGINEERING AND TECHNOLOGY) IET/A/EE/Purchase/2009. Thenhipalam P.O. Dated. 03-02-20. TENDER NOTICE Sl. No Sealed competitive tenders are invited for the supply of the
Sai Nath University. Assignment For Diploma in E&C 4 th Sem.
Sai Nath University Assignment For Diploma in E&C 4 th Sem. The Assignment will consist of two parts, A and B. Part A will have 5 short answer questions(40-60 words) of 4 marks each. Part B will have 4
PE Electrical Machine / Power Electronics. Power Electronics Training System. ufeatures. } List of Experiments
Electrical Machine / Power Electronics PE-5000 Power Electronics Training System The PE-5000 Power Electronics Training System consists of 28 experimental modules, a three-phase squirrel cage motor, load,
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM. Course Title: ELECTRONICS COMPONENTS AND CIRCUITS (Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM Course Title: ELECTRONICS COMPONENTS AND CIRCUITS (Code: 3330905) Diploma Programme in which this course is offered Electrical Engineering
Scheme & Syllabus. New. B.Sc. Electronics. (Honours) Course. I st to IV th Semester. w.e.f. July Devi Ahilya Vishwavidyalaya,
Scheme & Syllabus of New B.Sc. Electronics (Honours) Course I st to IV th Semester w.e.f. July 2011 Devi Ahilya Vishwavidyalaya, Indore (M.P.) 452001 SEMESTER SYSTEM, 2011-2014 PROPOSED SCHEME FOR B.Sc.
Scheme & Syllabus. B.Sc. Electronics. Honours Course. I st & II nd Semester. w.e.f. July Devi Ahilya Vishwavidyalaya, Indore (M.P.
Scheme & Syllabus of B.Sc. Electronics Honours Course I st & II nd Semester w.e.f. July 2011 Devi Ahilya Vishwavidyalaya, Indore (M.P.), 452001 SEMESTER SYSTEM, 2011-2014 PROPOSED SCHEME FOR B.Sc. ELECTRONICS