Clarke & Severn Electronics Ph
|
|
|
- Dominic Crawford
- 5 years ago
- Views:
Transcription
1 Clarke & Severn Electronics Ph POWER AMPLIFIER FPA GHz FPA GHz FPA GHz FPA GHz FPA GHz FPA GHz FPA GHz
2 GHz FPA Description A medium power full WR-10 waveguide band amplifier giving +10 dbm typical output power. Features High gain High P1dB Wide bandwidth Applications Communication receivers/wireless links Driver amplifiers Point to point communication Sensors/Radars Specification Unit Min Typ Max Frequency GHz Bandwidth GHz 35 Output Power Psat dbm +10 Gain db 10 DC Power V/mA 6/150 In/Out VSWR - 2.5:1 Page 1 of 2
3 GHz FPA FT Typical Output Power output Power [dbm] Frequency [GHz] Page 2 of 2
4 88 96 GHz FPA Description A state of the art W-Band high power amplifier giving 0.5W of output power over a broad band in a WR-10 waveguide assembly. Features High gain P1dB Wide bandwidth Applications Communication receivers/wireless links Driver amplifiers Point to point communication Sensors/Radars Specification Unit Min Typ Max Frequency GHz Bandwidth GHz 8 Output Power dbm 27 Gain db 13 DC Power V/ma 15/400 VSWR 2.5:1 Page 1 of 2
5 88 96 GHz FPA Output Power v RF Frequency Output Power (dbm) Unit 1a Unit 2a Unit 3a Unit 4a Unit 5a Unit 6a Unit 7a RF Frequency (GHz) Gain v RF Frequency Gain (db) Unit 1a Unit 2a Unit 3a Unit 4a Unit 5a Unit 6a Unit 7a RF Frequency (GHz) Page 2 of 2
6 88 96 GHz FPA Description A state of the art W-Band high power amplifier giving 1W of output power over a broad band in a WR-10 waveguide assembly. The unit comes with integrated cooling to allow operation without the need for expensive heat-sinking or specific mounting to dissipate heat. Features High gain P1dB Wide bandwidth Applications Communication receivers/wireless links Driver amplifiers Point to point communication Sensors/Radars Specification Unit Min Typ Max Frequency GHz Bandwidth GHz 8 Output Power dbm 30 Gain db 25 DC Power V/ma 15/1200 VSWR 2.5:1 Page 1 of 2
7 88 96 GHz FPA Output Power v RF Frequency Output Power (dbm) FTL xxxx RF Frequency (GHz) Page 2 of 2
8 GHz FPA Description A high power full WR-10 waveguide band amplifier giving +20 dbm typical output power. Features High gain High P1dB Wide bandwidth Applications Communication receivers/wireless links Driver amplifiers Point to point communication Sensors/Radars Specification Unit Min Typ Max Frequency GHz Bandwidth GHz 35 Output Power Psat dbm +20 Gain db 15 DC Power V/mA 12/100 In/Out VSWR - 2.5:1 Page 1 of 2
9 GHz FPA FT Typical Output Power output Power [dbm] Frequency [GHz] Page 2 of 2
10 71 77 GHz FPA Description A state of the art E-Band high power amplifier giving >0.5W of output power over a broad band in a WR-12 waveguide assembly. The amplifier can be supplied as a stand alone product or as a transmit power booster for the FMCW-12 range of products. Features High saturated output power High Gain Wide bandwidth Applications FMCW systems Communication receivers/wireless links Driver amplifiers Point to point communication Sensors/Radars Specification Unit Min Typ Max Frequency GHz Bandwidth GHz 6 Output Power dbm Gain db 16 DC Power V/ma 15/450 VSWR 2.5:1 Page 1 of 2
11 71 77 GHz FPA O/P power v RF Frequency Output Power (dbm) FPA RF Frequency (GHz) Gain v RF Frequency Gain (db) FPA RF Frequency (GHz) Page 2 of 2
12 55-65 GHz FPA Description A comprehensive range of MMIC-based amplifiers covering GHz region are available including some new W-band and U- band, Interfaces can be designed to suit the application as well as custom designs being available, Features High gain P1dB Wide bandwidth Applications Communication receivers Radar front ends Driver amplifiers Point to point communication Specification Unit Min Typ Max Frequency GHz Bandwidth GHz 10 P1dB db 16 Gain db 25 DC Power V/ma 8/200 VSWR 2.0:1 Page 1 of 1
13 FPA GHz Amplifier Revision: December 2008 Applications Driver amplifier Base Station TX Instrumentation Point to point communications Features Product features Min Typ Max Unit RF Frequency GHz Linear Gain db Psat 33 dbm P1dB dbm Supply Voltage V Supply Current 4600 ma Connectors Input 2.4 mm Output WR-22 Description A general purpose 1 watt CW power amplifier in the GHz frequency range. The unit is used with a heatsink. FTL7241 Small Signal Gain Gain db frequency Ghz Series1 Page 1 of 3
14 FPA GHz Amplifier Revision: December dB compression point at 44.5 GHz Outputpower dbm 44.5 GHz Note : The data contained in this document describes new products in the pre-production phase of development, and is for information only. Farran Technology reserves the right to change, Page 2 of 3
15 FPA GHz Amplifier Revision: December 2008 without notice, the characteristic data and other specifications applied to this product. The product may be subject to Irish export restrictions. Page 3 of 3
Clarke & Severn Electronics Ph FREQUENCY SOURCES FST FST FST
Clarke & Severn Electronics Ph +612 9482 1944 Email sales@clarke.com.au www.cseonline.com.au FREQUENCY SOURCES FST-05-0002 FST-05-0001 FST-04-0001 FST-04-0001 Source Modules Description The Farran Technology
SPA SMA DATA SHEET
43 db Gain Medium Power High Gain Amplifier at 3 Watt P1dB Operating From 14.4 GHz to 15.4 GHz with 41 dbm IP3 and SMA SPA-154-43-03-SMA is a 3 Watt Ku Band high gain power coaxial amplifier operating
Clarke & Severn Electronics Ph
Clarke & Severn Electronics Ph +612 9482 1944 Email sales@clarke.com.au www.cseonline.com.au VNA FREQUENCY EXTENDER CAL KIT Cal Kit FEK-19-40-60GHz Cal Kit FEK-15-50-75GHz Cal Kit FEK-12-60-90GHz Cal Kit
SERIES LNA LOW NOISE AMPLIFIERS DESCRIPTION. Millimeter-Wave Technology & Solutions
LOW NOISE AMPLIFIERS FEATURES: Wideband coverage Modular compact design Military or commercial units available 2.92, 2.4, 1.85 mm or Waveguide interfaces as required Internal voltage regulation and bias
Features. = +25 C, Vdd =+28V, Idd = 850 ma [1]
![Features. = +25 C, Vdd =+28V, Idd = 850 ma [1]](/thumbs/87/97234843.jpg "Features. = +25 C, Vdd =+28V, Idd = 850 ma [1]")
v1.413 HMC87F POWER AMPLIFIER, 2 - GHz Typical Applications The HMC86F is ideal for Test Instrumentation General Communications Radar Functional Diagram Features High Psat: +38. dbm Power Gain at Psat:
Main Features: ERZ-LNA Typical applications: Performance
Main Features: Frequency Range: 2 to 45 GHz. Typical values: Gain 15 db, NF 5 db RF connectors (I/O): 2.4 mm Solder filtered pins for DC connection Several mounting options Gold platted compact aluminum
4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz
4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 40 db Typical Psat: +37 dbm Typical Noise Figure: 3dB Typical Supply Voltage: +24V (-NP) / +36V (-WP)
PCS Base Station High output power, P1dB = 38 dbm. GPS Applications High gain > 20 db. WLAN Repeaters Efficiency > 30%
AM143438WM-BM-R AM143438WM-FM-R DESCRIPTION AMCOM s AM143438WM-BM-R and AM143438WM-FM-R are part of the GaAs HiFET MMIC power amplifier series. These high efficiency MMICs are 2-stage GaAs phemt power
Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20
AMT-A0119 0.8 GHz to 3 GHz Broadband High Power Amplifier W P1dB Data Sheet Features 0.8 GHz to 3GHz Frequency Range Class AB, High Linearity Gain db min 55 db Typical Gain Flatness < ± 1.2 db Typical
GaAs MMIC Power Amplifier
GaAs MMIC Power Amplifier AM14344WM-BM-R AM14344WM-FM-R Aug Rev DESCRIPTION AMCOM s is part of the GaAs HiFET MMIC power amplifier series. This high efficiency MMIC is a 2-stage GaAs phemt power amplifier
Features. Gain Variation Over Temperature db/ C
HMC-C26 Features Typical Applications The HMC-C26 Wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Gain: 3 db
5W Ultra Wide Band Power Amplifier 2-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 5W Ultra Wide Band Power Amplifier 2-18GHz Features Wideband Solid State Power Amplifier Psat: + 37dBm Gain: 35 db Supply Voltage: +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC32LC Typical Applications
Linear High Power Amplifiers
PRODUCTS Linear High Power Amplifiers Aethercomm designs and manufactures high power class A and AB linear amplifiers to transmit voice, data and video for military systems, wireless customers and industrial
1-24 GHz Distributed Driver Amplifier
Features Functional Block Diagram Wide bandwidth High linearity Single positive supply voltage On chip bias choke Description The CMD197C4 is a wideband GaAs MMIC driver amplifier housed in a leadless
SERIES MXP BALANCED MIXERS FEATURES: APPLICATIONS: DESCRIPTION
BALANCED MIXERS FEATURES: Low conversion loss and noise figure 13 dbm LO drive power Matched IF amplifier and LO offered Small, rugged package APPLICATIONS: DESCRIPTION Millitech series MXP balanced mixers
Ceramic Packaged GaAs Power phemt DC-10 GHz
Ceramic Packaged GaAs Power phemt DC- GHz DESCRIPTION AMCOM s is part of the BI series of GaAs phemts. This part has a total gate width of 6mm. The is designed for high power microwave applications, operating
SHF Communication Technologies AG. Wilhelm-von-Siemens-Str. 23D Berlin Germany. Phone Fax
SHF Communication Technologies AG Wilhelm-von-Siemens-Str. 23D 12277 Berlin Germany Phone +49 30 772051-0 Fax ++49 30 7531078 E-Mail: sales@shf.de Web: http://www.shf.de Datasheet SHF 100 BPP Broadband
8W Wide Band Power Amplifier 1GHz~22GHz
8W Wide Band Power Amplifier 1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 50 db Typical Psat: +39 dbm Supply Voltage: +36V Electrical Specifications, T A = +25⁰C Typical Applications
CTT Technical Proposal
CTT Technical Proposal 6-1 GHz 0 W Power Amplifier (GaAs and GaN approaches) SECTION 1: 6-1 GHz 0 W power amplifiers A) Specification and comparison SECTION 2: GaAs 6-1 GHz Solid State Power Amplifier
30W Solid State High Power Amplifier 2-6 GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 30W Solid State High Power Amplifier 2-6 GHz Features Wideband Solid State Power Amplifier Psat: +45dBm Gain: 50dB Supply Voltage: +36V Electrical Specifications, T A = +25⁰C, Vcc = +36V
Cascadable Silicon Bipolar MMIC Amplifier. Technical Data MSA-0686
Cascadable Silicon Bipolar MMIC Amplifier Technical Data MSA-686 Features Cascadable Ω Gain Block Low Operating Voltage:. V Typical V d db Bandwidth: DC to.8 GHz High Gain: 8. db Typical at. GHz Low Noise
DC-20 GHz Distributed Driver Amplifier. Parameter Min Typ Max Min Typ Max Units
7-3 RF-LAMBDA DC-20 GHz Distributed Driver Amplifier Electrical Specifications, T A =25 Features Ultra wideband performance Positive gain slope High output power Low noise figure Microwave radio and VSAT
Parameter Min. Typ. Max. Min. Typ. Max. Units
25W Wide Band Power Amplifier 20-6000MHz Features Wideband Solid State Power Amplifier Psat: +45dBm Typical Gain: 50dB Typical Supply Voltage: +60V DC Electrical Specifications, T A =25 Parameter Min.
Features. = +25 C, Vdd = 5V
v3.117 HMC1LH5 Typical Applications The HMC1LH5 is a medium PA for: Telecom Infrastructure Military Radio, Radar & ECM Space Systems Test Instrumentation Functional Diagram Features Gain: 5 db Saturated
Features. = +25 C, Vdd = +5V, Idd = 400mA [1]
![Features. = +25 C, Vdd = +5V, Idd = 400mA [1]](/thumbs/78/77182342.jpg "Features. = +25 C, Vdd = +5V, Idd = 400mA [1]")
v.61 Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT Military & Space Features Saturated Output Power:.5 dbm @ 21% PAE High Output IP3: 34.5 dbm High Gain:.5
OBSOLETE HMC5846LS6 AMPLIFIERS - LINEAR & POWER - SMT. Electrical Specifications, T A. Features. Typical Applications. General Description
v1.414 Typical Applications The HMC846LS6 is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Military & Space Functional Diagram Electrical Specifications, T A = +2 C Vdd = Vdd1,
100W Power Amplifier 8GHz~11GHz
100W Power Amplifier 8GHz~11GHz High output power +50dBm Aerospace and military application X band radar High Peak to average handle capability All specifications can be modified upon request Parameter
Features. = +25 C, Vdd = +7V, Idd = 1340 ma [1]
![Features. = +25 C, Vdd = +7V, Idd = 1340 ma [1]](/thumbs/89/100552958.jpg "Features. = +25 C, Vdd = +7V, Idd = 1340 ma [1]")
Typical Applications The HMC591LP5 / HMC591LP5E is ideal for use as a power amplifi er for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Space Features Saturated
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.414 Typical Applications The HMC5846LS6
Ultra Wide Band Low Noise Amplifier GHz. Electrical Specifications, TA = +25⁰C, With Vg= -5V, Vcc = +4V ~ +7V, 50 Ohm System
Ultra Wide Band Low Noise Amplifier 0.5 46GHz Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.5 20 20 46 GHz Gain 13 13 db Gain Variation Over Temperature (-45 ~ +85) ±3 ±2 db Noise Figure
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.65 HMC455LP3 / 455LP3E Typical
Features. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz
Typical Applications The HMC62LP / HMC62LPE Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Ultra Wide Band Low Noise Amplifier 0.01GHz~10GHz Electrical Specifications, TA = 25, Vcc = 12V Features Gain: 28dB Typical Noise Figure: 2.5dB Typical High P1dB: 15dBm Typical Supply Voltage: 12V Parameter
SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER,
v2.617 AMPLIFIER, - 12 GHz Typical Applications The is ideal for use as a power amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated
Features = +5V. = +25 C, Vdd 1. = Vdd 2
v7.11 HMC1LC3 POWER AMPLIFIER, - GHz Typical Applications The HMC1LC3 is ideal for use as a medium power amplifier for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO
CMD158C GHz Driver Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 5.0 V, T A = 25 o C, F = 11 GHz
Features Functional Block Diagram Broadband performance High output power Low current consumption Single supply voltage: +5.0 V @ 95 ma Pb-free RoHs compliant 4x4 QFN package Description The CMD158C4 is
AM003536WM-BM-R AM003536WM-FM-R
AM0036WM-BM-R AM0036WM-FM-R DESCRIPTION AMCOM s is an ultra broadband GaAs MMIC power amplifier. It has 23 db gain, and 36 dbm output power over the 0.01 to 3.5 GHz band. This MMIC is in a ceramic package
9W Power Amplifier 26.2GHz~34GHz
9W Power Amplifier 26.2GHz~34GHz High output power > +39.5 dbm Aerospace and military application High Peak to average handle capability High Linearity and low noise figure All specifications can be modified
Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 70 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2.5 db Gain: 13 db P1dB
Preliminary DATA SHEET VWA Product-Line
VWA 5000054 AA Description The VWA 5000054 AA is a distributed amplifier designed on a 0.15 µm phemt process. The device includes an internal biasing circuit which can be used to feed directly the drain
GHz 6-Bit Digital Phase Shifter Module
5. 6.5 GHz 6-Bit Digital Phase Shifter Module Features Frequency Range: 5. to 6.5 GHz Low RMS Phase Error ~ 4 o 8.5 db Maximum Insertion Loss 23dBm Input P 1dB Integrated TTL driver SMA (RF) / D-type(control)
CMD233C GHz Distributed Low Noise Amplifier. Features. Functional Block Diagram. Description
Features Functional Block Diagram Wide bandwidth Single positive supply voltage Low noise figure Pb-free RoHs compliant 4x4 QFN package Description The CMD233C4 is a wideband GaAs MMIC low noise amplifier
Universal/Standard Ku-band GaN 40W BUC MODEL No. NJT8371 series
< Features > * GaN Technology Amplifier Inside * RF Frequency Line-up Universal Ku-band: 13.75 to 14.5 GHz Standard Ku-band: 14.0 to 14.5 GHz * High Efficiency Output Power Saturation Output Power: +46.0
HMC5805ALS6 AMPLIFIERS - LINEAR & POWER - SMT. Typical Applications. Features. Functional Diagram
HMC585ALS6 v2.517 GaAs phemt MMIC.25 WATT POWER AMPLIFIER DC - 4 GHz Typical Applications The HMC585ALS6 is ideal for: Test Instrumentation Microwave Radio & VSAT Military & Space Telecom Infrastructure
Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 45 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2. db High Gain: 22 db
>10 W, GaN Power Amplifier, 0.01 GHz to 1.1 GHz HMC1099
9 1 11 12 13 14 1 16 32 GND 31 29 28 27 26 FEATURES High saturated output power (PSAT):. dbm typical High small signal gain: 18. db typical High power added efficiency (PAE): 69% typical Instantaneous
Features. = +25 C, Vdd1, 2, 3 = 5V, Idd = 250 ma*
v.4 HMC498LC4 Typical Applications Features The HMC498LC4 is ideal for use as a LNA or Driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use
HMC486LP5 / 486LP5E LINEAR & POWER AMPLIFIERS - SMT. SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7-9 GHz. Typical Applications.
v2. Typical Applications The HMC486LP5(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated Power: +33 dbm @ 2% PAE Output IP3:
FMAM4032 DATA SHEET. 10 MHz to 6 GHz, Medium Power Broadband Amplifier with 900 mw, 24 db Gain and SMA. Features: Applications:
FMAM432 1 MHz to 6 GHz, Medium Power Broadband Amplifier with 9 mw, 24 db Gain and SMA FMAM432 two stage amplifier operates across a wide frequency range from 1 MHz to 6 GHz The design utilizes GaAs PHEMT
Series HMPA and HHPA Power Amplifiers
DESCRIPTION The HMPA and HHPA Series of cover the frequency range from 18 100 GHz. A wide variety of gain and bandwidth combinations are available to provide the designer with a solution for most applications.
SHF Communication Technologies AG
SHF Communication Technologies AG Wilhelm-von-Siemens-Str. 23D 12277 Berlin Germany Phone ++49 30 / 772 05 10 Fax ++49 30 / 753 10 78 E-Mail: sales@shf.de Web: http://www.shf.de Datasheet SHF 806 E SHF
Features. = +25 C, Vdd = +10 V, Idd = 350 ma
HMC97APME v2.4 POWER AMPLIFIER,.2-22 GHz Typical Applications The HMC97APME is ideal for: Test Instrumentation Military & Space Functional Diagram Features High P1dB Output Power: + dbm High : 14 db High
6-18 GHz Low Phase Noise Amplifier
-1 GHz Low Phase Noise Amplifier Features Functional Block Diagram Wide bandwidth Low phase noise Low current consumption Pb-free RoHs compliant 4x4 mm SMT package Description The CMD24C4 is a wideband
Features. The HMC-C072 is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT. = +25 C, Vdc = +7V
amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -67 dbc/hz @ khz Noise Figure: 4.5 db Gain:
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.14 AMPLIFIER, 18-4 GHz Typical
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.38 POWER AMPLIFIER, 2-2 GHz Typical
dbm Supply Current (Idd) (Vdd=+36V)
Ka Band 6W Power Amplifier 28GHz~42GHz High output power Aerospace and military application High Peak to average handle capability High Linearity and low noise figure All specifications can be modified
FMAM1035 DATA SHEET. 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA. Features: Applications:
FMAM13 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA The FMAM13 is a low phase noise amplifier that operates across the frequency range from 3 GHz
Features. = +25 C, Vdd 1, 2, 3 = +3V
v.11 HMC6LC AMPLIFIER, 6-2 GHz Typical Applications The HMC6LC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military
30W Wideband Solid State Power Amplifier 6-12GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 30W Wideband Solid State Power Amplifier 6-12GHz Electrical Specifications, TA = +25⁰C, Vdd = +36V Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 6 9 10 12 GHz Gain 60 55 db
it to 18 GHz, 2-W Amplifier
it218 to 18 GHz, 2-W Amplifier Description Features Absolute Maximum Ratings Electrical Characteristics (at 2 C) -ohm system V DD = 8 V Quiescent current (I DQ = 1.1 A The it218 is a three-stage, high-power
Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]
![Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]](/thumbs/94/119028866.jpg "Features. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]")
Typical Applications This is ideal for: Features Low Noise Figure: 1.8 db Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram High Gain: 19 db High
CMD158P GHz Driver Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 5.
Features Functional Block Diagram Broadband performance High output power Low current consumption Single supply voltage: +5.0 V @ 95 ma Pb-free RoHs compliant 3x3 QFN package Description The CMD8P3 is
Features. = +25 C, Vdd= 8V, Vgg2= 3V, Idd= 290 ma [1]
![Features. = +25 C, Vdd= 8V, Vgg2= 3V, Idd= 290 ma [1]](/thumbs/95/123095816.jpg "Features. = +25 C, Vdd= 8V, Vgg2= 3V, Idd= 290 ma [1]")
Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features P1dB Output Power: + dbm Gain:
27-31 GHz 2W Balanced Power Amplifier TGA4513-CP
27-31 GHz 2W Balanced Power Amplifier Key Features 27-31 GHz Bandwidth > 32 dbm Nominal P1dB 33 dbm Nominal Psat 22 db Nominal Gain IMD3 is 32 dbc @ 18 dbm SCL 12 db Nominal Return Loss Bias: 6 V, 84 ma
GaAs MMIC Power Amplifier
GaAs MMIC Power Amplifier AM14MM-BM-R AM14MM-FM-R Aug 10 Rev 8 DESCRIPTION AMCOM s is part of the GaAs HiFET MMIC power amplifier series. It is a 2-stage GaAs MESFET MMIC power amplifier biased at 14V.
GaAs MMIC Power Amplifier
GaAs MMIC Power Amplifier AM83WM-BM-R AM83WM-FM-R December 214 REV DESCRIPTION AMCOM s AM83WM-BM/FM-R is an ultra broadband GaAs MMIC power amplifier. It has 23dB gain, and >28dBm output power over the.
CMD170P GHz Driver Amplifier. Features. Functional Block Diagram. Description
Features Functional Block Diagram High output power On-chip detector All positive bias Pb-free RoHs compliant 4x4 QFN package Description The CMD170P4 is a GaAs MMIC driver amplifier housed in a leadless
FMAM5032 DATA SHEET. 48 db Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 dbm IP3 and SMA.
48 Gain High Power High Gain Amplifier at 50 Watt Psat Operating From 500 MHz to 3 GHz with 52 m IP3 and SMA FMAM5032 is a high gain Class A/AB GaN Linear Power Amplifier operating in the 500 to 3000 MHz
Features. = +25 C, Vdd = +4V, Idd = 90 ma [2]
![Features. = +25 C, Vdd = +4V, Idd = 90 ma [2]](/thumbs/89/98833557.jpg "Features. = +25 C, Vdd = +4V, Idd = 90 ma [2]")
v.91 HMCLCB AMPLIFIER, 1-27 GHz Typical Applications This HMCLCB is ideal for: Features Noise Figure: 2.2 db @ 2 GHz Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation
Features OBSOLETE. = +25 C, as a function of Vdd. Vdd = +3V Vdd = +5V Vdd = +5V Vdd = +5V Parameter
v5.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER,. - 3. GHz Typical Applications Broadband or Narrow Band Applications: Cellular/PCS/3G Fixed Wireless & Telematics Cable Modem Termination Systems
Parameter Min. Typ. Max. Units. Frequency Range 8-11 GHz. Saturated Output Power (Psat) 52 dbm. Input Max Power (No Damage) Psat Gain dbm
150W Solid State EMC Benchtop Power Amplifier 8GHz~11GHz Electrical Specifications, T A =25 Features Automatic Calibration Built in Temperature Compensation Adjustable Attenuation: 31.5dB Range, 0.5dB
BROADBAND DISTRIBUTED AMPLIFIER
ADM1-26PA The ADM1-26PA is a complete LO driver solution for use with all Marki mixers up to 26. GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry.
Millimeter Wave Components & Subsystems. Airport East Business Park, Farmers Cross, Cork, Ireland
- 0 - Contents Mixers and Detectors Low Cost Planar Detectors to 170 GHz...4 Waveguide Detectors to 325 GHz SERIES WD.. 6 Balanced Mixers SERIES BMC 8 Harmonic Mixers... 10 Subharmonically Pumped Mixers
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC7LP5E POWER AMPLIFIER,.2
GaAs MMIC Power Amplifier
GaAs MMIC Power Amplifier December 2012 Rev0 DESCRIPTION AMCOM s AM357037WM is a broadband GaAs MMIC Power Amplifier. It has a nominal CW performance of 26dB small signal gain, and 37dBm (5W) saturated
HMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram
v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single
Features. Parameter Min Typ. Max Min Typ. Max Min Typ Max Units Frequency Range GHz Gain
Typical Applications The HMC82LP4E is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Marine Radar Military EW & ECM Functional Diagram Features High Saturated Output Power:
12D05A L- & S-Band Solid State Power Amplifier
12D05A L- & S-Band Solid State Power Amplifier 35 Watts CW @ 1.7 GHz to 2.1 GHz 20 Watts CW @ 2.1 GHz to 2.4 GHz P/N: NW-PA-12D05A (Includes NW-PA-ACC-CB09MC interface cable) The NuPower 12D05A is a small,
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Electrical Specifications, T A =25 Ultra Wide Band Low Noise Amplifier AC 110V/220V 0.01-20GHz Parameters Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.01 10 10 20 GHz Gain 28 30 26 28 db Gain
RS3400W/04 77 GHz Radar Sensor
Features Complete 76-77GHz band FMCW Radar Front End Synthesized frequency source Wideband Sweep Description The RS34W/4 is a W-band FMCW radar front end featuring synthesized frequency sweeps. A fast
Features. = +25 C, Vdd= 5V, Vgg2= Open, Idd= 60 ma*
v.7 HMCLH AGC AMPLIFIER, - GHz Typical Applications The HMCLH is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C I Test Instrumentation Fiber Optics Functional Diagram Features
2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range
2W Ultra Wide Band Power Amplifier 0.2GHz~35GHz Features Wideband Solid State Power Amplifier Gain: 37dB Typical Psat 35dBm Typical Electrical Specifications, TA = +25⁰C, Vcc = +12V. Parameter Min. Typ.
12B04A L- & S-Band Bidirectional Amplifier
NuPower Xtender TM 12B4A L- & S-Band Bidirectional Amplifier Watt CW 2. Watts Linear, % EVM @ 34 dbm 1. GHz - 2. GHz P/N: NW-BA-12B4A (includes NW-BA-ACC-CB9MA) The NuPower Xtender TM 12B4A is a small,
Features. Parameter Min Typ. Max Min Typ. Max Min Typ Max Units Frequency Range GHz Gain
Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Marine Radar Military EW & ECM Functional Diagram Features High Saturated Output Power: dbm @ % PAE
Gallium Nitride MMIC Power Amplifier
Gallium Nitride MMIC Power Amplifier August 2015 Rev 4 DESCRIPTION AMCOM s is an ultra-broadband GaN MMIC power amplifier. It has 21dB gain, and >41dBm output power over the 0.03 to 6GHz band. This MMIC
Features. Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm
v1.314 Typical Applications Features The is ideal for: Test Instrumentation Microwave Radio & VSAT Telecom Infrastructure Military & Space Fiber optics Functional Diagram P1dB Output Power: +27 dbm Psat
Features. = +25 C, Vdd= +12V, Vgg2= +5V, Idd= 400 ma*
Typical Applications The HMC637LP5(E) wideband PA is ideal for: Features P1dB Output Power: +29 dbm Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional
AVP TO 2600 MHz, 15 WATTS HIGH POWER GaNPak B AMPLIFIER AVP2524 SPECIFICATIONS * INTERMODULATION PERFORMANCE ABSOLUTE MAXIMUM RATINGS AVP2524
Rev. 5/1 6 TO 26 MHz, 15 WATTS HIGH POWER GaNPak B AMPLIFIER Typical Values Broadband....................................... High Gain....................................... High Saturated Power, Psat.........................
GaAs MMIC Power Amplifier
GaAs MMIC Power Amplifier December 2012 Rev0 DESCRIPTION AMCOM s AM357039WM is a broadband GaAs MMIC Power Amplifier. It has a nominal CW performance of 21dB small signal gain, and 38.5dBm (7W) saturated
Features. = +25 C, +Vdc = +6V, -Vdc = -5V
v3.7 WIDEBAND LNA MODULE, - 2 GHz amplifiers Typical Applications The Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Industrial Sensors Functional
Features. Gain: 17 db. OIP3: 25 dbm. = +25 C, Vdd 1, 2 = +3V
v.7 HMCLC Typical Applications The HMCLC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space Functional
2-20 GHz Driver Amplifier
2-2 GHz Driver Amplifier Features Functional Block Diagram Wide bandwidth High linearity Low current consumption Pb-free RoHs compliant 4x4 mm SMT package Description The CMD187C4 is a wideband driver
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com HMC461* Product Page Quick Links Last Content Update: 8/3/216 Comparable
Parameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20
AMT-A0142 1 GHz to 18 GHz Broadband Medium Power with Low Noise Amplifier Data Sheet Features 1 GHz to 18 GHz Frequency Range Typical P1dB power > +23 dbm Gain 18 db Typical Gain Flatness ± 1 db Typical
Features. = +25 C, Vdd= 8V, Idd= 75 ma*
HMC46LC5 Typical Applications v3.11 AMPLIFIER, DC - 2 GHz Features The HMC46LC5 is ideal for: Noise Figure: 2.5 db @ 1 GHz Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation
SLA SMA DATA SHEET
SLA-6-8-4-SMA 8 Gain Limiting Amplifier Operating From 2 GHz to 6 GHz with -61 to 1 Pin, 1 Psat and SMA The SLA-6-8-4-SMA is a 2 to 6 GHz high gain wide-band coaxial limiting amplifier. The model operates
GaAs MMIC Power Amplifier
GaAs MMIC Power Amplifier AM83WM-BM-R AM83WM-FM-R March 211 Rev 1 DESCRIPTION AMCOM s AM83WM-BM/FM-R is an ultra broadband GaAs MMIC power amplifier. It has 23dB gain, and >28dBm output power over the.
RF POWER AMPLIFIER. For Accelerator Bunch-Beam-FeedBack R&K-GA005M R-SL
All Solid-State Amplifier Broadband Frequency:5MHz~MHz Power :2W APPLICATION EMC(Electromagnetic Compatibility) Accelerator Application Telecommunication Test and Measurement Application Etc... OUTLINE