RF POWER AMPLIFIER. For Accelerator Bunch-Beam-FeedBack R&K-GA005M R-SL
|
|
- Godwin Clarke
- 5 years ago
- Views:
Transcription
1 All Solid-State Amplifier Broadband Frequency:5MHz~MHz Power :2W APPLICATION EMC(Electromagnetic Compatibility) Accelerator Application Telecommunication Test and Measurement Application Etc... OUTLINE DRAWING IN MILLIMETERS For Accelerator Bunch-Beam-FeedBack Frequency Range Small Gain Gain Flatness Power 5MHz~ 10MHz 10MHz~MHz Harmonics Spurious Impedance Input VSWR VSWR Maximum RF Input Power AC Supply Input Operating Temperature Storage Temperature Connectors Size AMP. Unit P.S. Unit Weight Cooling Protection Circuits : 5MHz ~ MHz : +54.0dB (min.) : ±3.0dB (max.) : 2W : 1W Comp. : 200W Comp. : -20.0dBc : -70.0dBc : Ω : 2.0 (max.) : 3.0 (typ.) : +3.0dBm : AC190V 230V/1φ, /60Hz, 3kVA max. : 0 to +35 : -15 to +65 : RF IN N FEMALE RF OUT N FEMALE : (W)480mm (D)649.5mm (H)177mm : (W)480mm (D)649.5mm (H)177mm : 70.0kg (max.) : Forced Air Cooling : Over Temperature Protection Power Supply Voltage Protection Over Power Protection Over Reflection Power Protection FRONT VIEW SIDE VIEW A A00 6
2 Gain (db) Small Gain VSWR Input / VSWR Input VSWR VSWR 57 Power 1dB Gain Comp. 0 Harmonics Power = 200W Power (dbm) Harmonics (dbc) Power Linearity 54 FWD LIMIT 52 Power (dbm) Frequency 5MHz 10MHz 20MHz MHz 100MHz 200MHz 0MHz 600MHz 800MHz MHz Input Power (dbm)
3 RF POWER AMPLIFIER ①Single shot ②Single shot Input vs Input Frequency : 20MHz Power : 200W peak ③Single shot Frequency : 20MHz Power : 200W peak ④Single shot Input vs Input Frequency : MHz Power : 200W peak ⑤Single shot 3 Frequency : MHz Power : 200W peak ⑥Single shot 3 Input vs Input Frequency : MHz Power : 200W peak Further, The export of R&K products from Japan may be subject to an export license by the government Frequency : MHz Power : 200W peak
4 1dB Gain Compression 2dB/div REF : 54dB Marker1 : 5MHz dB Marker2 : 100MHz dB Marker3 : 200MHz dB Marker4 : 0MHz dB Marker5 : 600MHz dB Marker6 : 800MHz dB Marker7 : MHz dB Group Delay 5ns/div Marker1 : 5MHz ns Marker2 : 100MHz ns Marker3 : 200MHz ns Marker4 : 0MHz ns Marker5 : 600MHz ns Marker6 : 800MHz ns Marker7 : MHz 21.2ns REF : 0ns
5 Phase Flatness 45 /div REF : 0 Marker1 : 5MHz Marker2 : 100MHz Marker3 : 200MHz Marker4 : 0MHz Marker5 : 600MHz Marker6 : 800MHz Marker7 : MHz Phase offset=0 Electrical Delay=0nsec 30 /div REF : 30 Marker1 : 5MHz Marker2 : 100MHz Marker3 : 200MHz Marker4 : 0MHz Marker5 : 600MHz Marker6 : 800MHz Marker7 : MHz Phase offset=-180 Electrical Delay=19.939nsec
6 Power Stability (Free Running Data at Room Temperature) Frequency = MHz Power = Gain(dB) Temp.( ) Gain Temp Time(Sec.) Phase Stability (Free Running Data at Room Temperature) Frequency = MHz Power = Phase(deg) Temp.( ) -4 Phase Temp Time(Sec.)
PULSED RF POWER AMPLIFIER
PULSED RF AMPLIFIER R&K- All Solid-State Amplifier Frequency Range:324MHz±5MHz :1kW(min.)@Peak RF PULSE :CHOPPER AMPLIFIER Building Block Construction APPLICATION Accelerator Application SPECIFICATIONS
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
50W Broadband High Power Amplifier Module 500 2500MHz Electrical Specifications, T A = +25⁰C, Vdd = +28V Features Ultra-broadband Amplifier Module Small and lightweight Supply Voltage: +28V Parameter Min.
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
80W Broadband High Power Amplifier Module 20-1000MHz Electrical Specifications, T A = +25⁰C, VDD = +28V Features Broadband High Power High Efficiency Great Linearity Small Size & Light Weight Low Distortion
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
100W Coaxial Microwave Power Amplifier 20MHz~520MHz Features Small signal open loop gain: 50dB Output power 100W typical Electrical Specifications, T A = +25 C Typical Applications Suitable for RFI, EMC
More informationRF Amplifier Data Sheet. BT00100-AlphaA-CW 10kHz-1MHz 100W. Scientific and Industrial Applications
10kHz-1MHz 100W Scientific and Industrial Applications The BT-AlphaA-CW series is a range of class AB RF power amplifiers covering the 10kHz to 1MHz frequency range. Rugged, solid-state design - high reliability
More informationRF Amplifier Data Sheet. BT00500-AlphaSA-CW 0.5MHz-150MHz 500W. Scientific and Industrial Applications
0.5MHz-150MHz 500W Scientific and Industrial Applications The BT-AlphaSA-CW series is a range of class AB RF power amplifiers covering the 0.5MHz to 150MHz frequency range. Rugged, solid-state design -
More informationSolid State General Communication Power Amplifier
The GCS1D2GUT (SKU 4062) is suitable for broadband high power linear applications in the HF frequency range. This rack mount amplifier utilizes pushpull MOSFET power devices that provide high gain, wide
More informationRF Amplifier Data Sheet. BT02000-AlphaA-100ms 10kHz-3MHz 2kW. Scientific and Industrial Applications
10kHz-3MHz 2kW RF Specifications Type Rated Power P1dB Gain Class AB MOSFET 2000W minimum PEP for input power of 0dBm 1600W minimum Minimum output power at P1dB compression 63dB minimum Scientific and
More informationRF Amplifier Data Sheet. BT01000-Gamma 5MHz-400MHz 1kW. Scientific and Industrial Applications
RF Specifications Type Class AB MOSFET 5MHz-400MHz 1kW Scientific and Industrial Applications Rated Power P1dB Gain Frequency Gain flatness 1000W minimum PEP for input power of 0dBm 800W minimum Minimum
More informationParameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20
AMT-A0119 0.8 GHz to 3 GHz Broadband High Power Amplifier W P1dB Data Sheet Features 0.8 GHz to 3GHz Frequency Range Class AB, High Linearity Gain db min 55 db Typical Gain Flatness < ± 1.2 db Typical
More information2 GHz to 6 GHz, 500 W Power Amplifier HMC8113
Data Sheet FEATURES 2 GHz to 6 GHz frequency range 85 db typical small signal gain 57 dbm typical saturated output power 61 db gain control range with 1 db LSB Standard 5U 19-inch rack chassis (per EIA-310D)
More informationSpecification for Radiated susceptibility Test
1 of 11 General Information on Radiated susceptibility test Supported frequency Range : 20MHz to 6GHz Supported Field strength : 30V/m at 3 meter distance 100V/m at 1 meter distance 2 of 11 Signal generator
More informationFrequency Synthesizer
50Ω 3700 MHz (fixed) The Big Deal Low phase noise and spurious Fixed frequency without external programming Integrated microcontroller Robust design and construction Case size 2.75" x 1.96" x 0.62" CASE
More information4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz
4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 40 db Typical Psat: +37 dbm Typical Noise Figure: 3dB Typical Supply Voltage: +24V (-NP) / +36V (-WP)
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Ultra Wide Band Low Noise Amplifier AC 1V/2V 0.0~ Electrical Specifications, T A =2 Parameters Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.01 1 1 3 GHz Gain 33 36 33 36 db Gain Flatness ±1. ±1.0
More informationHigh Power Amplifier, Solid State, Broadband MHz, 51dB Gain, SMA Female Connectors, 1dB GCP. RAMP M-51d-Sf-80W-e7
ELECTRICAL SPECIFICATIONS @ +28 VDC, 25 C, 50 Ω System Parameter Symbol Min Typ Max Units Operating Frequency BW 20 1000 MHz Power Output CW P SAT 100 125 Watt Power Output @ 1 db Gain Compression Point
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Electrical Specifications, T A =25 Ultra Wide Band Low Noise Amplifier AC 110V/220V 0.01-20GHz Parameters Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.01 10 10 20 GHz Gain 28 30 26 28 db Gain
More information150W1000B. Features. 150 watts CW 80MHz 1000MHz Class A Portable Full VSWR tolerant CE & RoHS Compliant High Efficiency
Power (Watts) Specifications Class A Portable Full VSWR tolerant CE & RoHS Compliant High Efficiency Features The Model is a solid-state, selfcontained, air-cooled, broadband amplifier designed for applications
More informationR3132/3162. Advanced Test Equipment Rentals ATEC (2832) R3132 : 9kHz to 3GHz R3162 : 9kHz to 8GHz
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) R3132/3162 Spectrum Analyzer R3132 : 9kHz to 3GHz R3162 : 9kHz to 8GHz One Spectrum Analyzer For Versatile Applications
More informationFeatures. The HMC-C072 is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT. = +25 C, Vdc = +7V
amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -67 dbc/hz @ khz Noise Figure: 4.5 db Gain:
More informationBlock Upconverters for Integration in High Power Amplifiers
R Back to Block/Fixed Tuned Converters Block Upconverters for Integration in High Power Amplifiers Block Upconverters For Integration In High Power Amplifiers C-, X- and Ku-Band Models (except UPBA-13)
More informationNo. 1. BROADBAND RF-POWER-AMPLIFIERS 10 khz - 6 GHz. For immunity tests according to IEC, EN, ISO, SAE, MIL
No. 1 BROADBAND RF-POWER-AMPLIFIERS 10 khz - 6 GHz For immunity tests according to IEC, EN, ISO, SAE, MIL Power amplifiers with high linearity and high amplification in a wide frequency range with thermal
More informationSolid State Broadband High Power Amplifier
The BBS4A5AVT (2157) is suitable L & S Bands broadband or band specific high power applications. This amplifier utilizes high power GaN devices that provide wide frequency response, high gain, high peak
More informationFeatures. = +25 C, Vdd = +15V, Vgg2 = +9.5V [1], Idq = 500 ma [2]
v3.41 Typical Applications Features The is ideal for: Test Instrumentation Military & Space Fiber optics Functional Diagram P1dB Output Power: + dbm Psat Output Power: + dbm High Gain: db Output IP3: 42
More informationIF Digitally Controlled Variable-Gain Amplifier
19-2601; Rev 1; 2/04 IF Digitally Controlled Variable-Gain Amplifier General Description The high-performance, digitally controlled variable-gain amplifier is designed for use from 0MHz to 400MHz. The
More informationSpecification RIGOL. 6 Specification
Specification RIGOL 6 Specification This chapter lists the specifications and general specifications of the analyzer. All the specifications are guaranteed when the following conditions are met unless
More informationUltra Wide Band Low Noise Amplifier GHz. Electrical Specifications, TA = +25⁰C, With Vg= -5V, Vcc = +4V ~ +7V, 50 Ohm System
Ultra Wide Band Low Noise Amplifier 0.5 46GHz Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.5 20 20 46 GHz Gain 13 13 db Gain Variation Over Temperature (-45 ~ +85) ±3 ±2 db Noise Figure
More information12D05A L- & S-Band Solid State Power Amplifier
12D05A L- & S-Band Solid State Power Amplifier 35 Watts CW @ 1.7 GHz to 2.1 GHz 20 Watts CW @ 2.1 GHz to 2.4 GHz P/N: NW-PA-12D05A (Includes NW-PA-ACC-CB09MC interface cable) The NuPower 12D05A is a small,
More informationAVP TO 2600 MHz, 15 WATTS HIGH POWER GaNPak B AMPLIFIER AVP2524 SPECIFICATIONS * INTERMODULATION PERFORMANCE ABSOLUTE MAXIMUM RATINGS AVP2524
Rev. 5/1 6 TO 26 MHz, 15 WATTS HIGH POWER GaNPak B AMPLIFIER Typical Values Broadband....................................... High Gain....................................... High Saturated Power, Psat.........................
More information150W Solid State Broadband EMC Benchtop Power Amplifier 6-18GHz. Parameter Min Typ Max Min Typ Max Units
7-3 RF-LAMBDA 150W Solid State Broadband EMC Benchtop Power Amplifier 6-18GHz Electrical Specifications, T A =25 Voltage = 110v/220v AC Features High Saturated Output Power 50~52dBm. Telecom Infrastructure
More information12B01A-09 S-Band Solid State Power Amplifier
12B1A-9 S-Band Solid State Power Amplifier Watt CW 2.5 Watts Linear, 5% EVM @ 34 dbm 2. GHz - 2.5 GHz P/N: NW-PA-12B1A-9 The NuPower 12B1A-9 is a small, highly efficient solid state power amplifier that
More information12B01A-D30 L- & S-Band Solid State Power Amplifier w/ 1 Watt Input Drive Level
12B01A-D30 L- & S-Band Solid State Power Amplifier w/ 1 Watt Input Drive Level 10 Watts (CW) 1.0-2.5 GHz P/N: NW-PA-12B01A-D30 (Replaces P/N: NW-SSPA-10W-1.0-2.5-D30) The NuPower 12B01A-D30 is a small,
More informationPXI MICROWAVE LOCAL OSCILLATOR MODULE
The PXI-1450B Local Oscillator Module is a PXI 3U, 2-slot synthesizer module intended for frequency down conversion applications. The PXI-1450B is a VCO-based, 3 to 9 GHz synthesizer that uses QuickSyn
More informationKa Band Radar Transceiver
Ka Band Radar Transceiver Ka-Band Radar Transceiver with Integrated LO Source Homodyne System with Integrated TX & LO Multiplied VCO with Phase noise
More information12B01A L- & S-Band Solid State Power Amplifier
12B1A L- & S-Band Solid State Power Amplifier 1 Watt CW 2.5 Watts Linear, 5% EVM @ 34 dbm 1. GHz - 2.5 GHz P/N: NW-PA-12B1A (includes NW-PA-ACC-CB9MA interface cable) The NuPower 12B1A is a small, highly
More informationBroadband solid-state amplifier
Broadband solid-state amplifier Amplifier modules Amplifier instruments CETI provides multiple types of broadband solid-state amplifiers, such as low noise amplifiers, medium power driving amplifiers,
More informationFeatures 100A400AM20. 4kHz 400MHz Class A Portable Full VSWR tolerant CE & RoHS compliant High Efficiency
Specifications Class A Portable Full VSWR tolerant CE & RoHS compliant High Efficiency Features The Model is a solid-state, self -contained, air-cooled, broadband amplifier designed for applications requiring
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Ultra Wide Band Low Noise Amplifier 0.01GHz~10GHz Electrical Specifications, TA = 25, Vcc = 12V Features Gain: 28dB Typical Noise Figure: 2.5dB Typical High P1dB: 15dBm Typical Supply Voltage: 12V Parameter
More informationFeatures. Parameter Min Typ. Max Min Typ. Max Min Typ Max Units Frequency Range GHz Gain
Typical Applications The HMC82LP4E is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Marine Radar Military EW & ECM Functional Diagram Features High Saturated Output Power:
More informationBecker Nachrichtentechnik GmbH Kapellenweg Asbach - Germany
High Dynamic 8 Way Combiner 100 khz... 4000 MHz, 50 Ω Features - wideband - high dynamic - without signal losses - low power consumption - high port- to- port isolation - compact 19, 1 U design Applications
More informationSERIES DET GENERAL PURPOSE DETECTORS DESCRIPTION. Millimeter-Wave Technology & Solutions
GENERAL PURPOSE DETECTORS FEATURES: Full waveguide bandwidth High sensitivity No tuning required Zero bias APPLIC ATIONS: Instrumentation Power monitoring DESCRIPTION Millitech series DET detectors, utilizing
More informationNuPower TM. 11B02A Mini Multi-Octave Power Amplifier. Features. Applications. Benefits. 10 Watt CW 200 MHz MHz P/N: NW-PA-11B02A
11B02A Mini Multi-Octave Power Amplifier 10 Watt CW - 2600 MHz P/N: NW-PA-11B02A (includes NW-PA-ACC-CB09ME interface cable) The NuWaves NuPower TM 11B02A is a highly efficient, miniature solid state power
More informationFeatures. = +25 C, Vdd = +10 V, Idd = 350 ma
HMC97APME v2.4 POWER AMPLIFIER,.2-22 GHz Typical Applications The HMC97APME is ideal for: Test Instrumentation Military & Space Functional Diagram Features High P1dB Output Power: + dbm High : 14 db High
More informationFEU (Front End Unit) for Optic Repeater
FEU (Front End Unit) for Optic Repeater 1. Specification 1.1. All Items Parameter Specification Comments RX1 RX2 TX Frequency Range. 1750.625 ~ 1769.375MHz 1750.625 ~ 1769.375MHz 1840.625 ~ 1859.375MHz
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Ultra Wide Band Power Amplifier 0.7GHz ~ 6GHz Features Gain: 35dB typical Output power 38dBm typical High P1dB: 35 dbm Full Band Supply Voltage: 28V 50 Ohm Matched Electrical Specifications, T A = 25⁰C,
More informationC-band PLL LNB - Internal Reference (L.O. Stability: ±3 ppm) - MODEL No. NJS8486S/87S/88S series
C-band PLL LNB - Internal Reference (L.O. Stability: ±3 ppm) - MODEL No. NJS8486S/87S/88S series < Features > * Low Noise Temperature Noise Temperature: 15 K * Low DC Current Drain DC Current Drain: 350
More informationFeatures. = +25 C, Vdc = +7V
amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -7 dbc/hz @ khz Noise Figure: 6 db Gain:
More informationChapter 5 Specifications
RIGOL Specifications are valid under the following conditions: the instrument is within the calibration period, is stored for at least two hours at 0 to 50 temperature and is warmed up for 40 minutes.
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Ultra Wide Band Low Noise Amplifier 0.01GHz~30GHz Electrical Specifications, TA = 25⁰C Features Gain: 36 Typical Noise Figure: 3.5 Typical P1 Output Power: 28m Typical Supply Voltage: AC110V~220V Typical
More information100U1000. Features. 100 watts CW 100kHz 1000MHz Class A Portable Full VSWR tolerant CE & RoHS Compliant High Efficiency
Specifications 100U1000 Class A Portable Full VSWR tolerant CE & RoHS Compliant High Efficiency Features The Model 100U1000 is a solid-state, selfcontained, air-cooled, broadband amplifier designed for
More informationSC5307A/SC5308A 100 khz to 6 GHz RF Downconverter. Datasheet SignalCore, Inc.
SC5307A/SC5308A 100 khz to 6 GHz RF Downconverter Datasheet 2017 SignalCore, Inc. support@signalcore.com P RODUCT S PECIFICATIONS Definition of Terms The following terms are used throughout this datasheet
More information5W Ultra Wide Band Power Amplifier 2-18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 5W Ultra Wide Band Power Amplifier 2-18GHz Features Wideband Solid State Power Amplifier Psat: + 37dBm Gain: 35 db Supply Voltage: +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V
More informationC20R01 C-Band Solid State Power Amplifier
C20R01 C-Band Solid State Power Amplifier 20 Watts CW, 4.4 GHz - 4.9 GHz 2 Watts Linear, 4% EVM @ 33 dbm P/N: NW-PA-C-20-R01 (Includes NW-PA-ACC-CB09MC interface cable) The NuPower C20R01 is a small, highly
More informationParameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +37
AMT-A0060 6 GHz to 18 GHz Broadband Low Noise Amplifier with 5W CW Limiter Data Sheet Features 6 GHz to 18 GHz Frequency Range Typical Noise Figure < 2.2 db Typical Gain 25 db Gain Flatness < ± 1.5 db
More informationData Sheet SC5317 & SC5318A. 6 GHz to 26.5 GHz RF Downconverter SignalCore, Inc. All Rights Reserved
Data Sheet SC5317 & SC5318A 6 GHz to 26.5 GHz RF Downconverter www.signalcore.com 2018 SignalCore, Inc. All Rights Reserved Definition of Terms 1 Table of Contents 1. Definition of Terms... 2 2. Description...
More informationS3602A/B Vector Network Analyzer Datasheet
S3602A/B Vector Network Analyzer Datasheet Saluki Technology Inc. The document applies to the vector network analyzers of the following models: S3602A vector network analyzer (10MHz-13.5GHz). S3602B vector
More informationDC-20 GHz Distributed Driver Amplifier. Parameter Min Typ Max Min Typ Max Units
7-3 RF-LAMBDA DC-20 GHz Distributed Driver Amplifier Electrical Specifications, T A =25 Features Ultra wideband performance Positive gain slope High output power Low noise figure Microwave radio and VSAT
More informationFeatures. = +25 C, Vdd =+28V, Idd = 850 ma [1]
v1.413 HMC87F POWER AMPLIFIER, 2 - GHz Typical Applications The HMC86F is ideal for Test Instrumentation General Communications Radar Functional Diagram Features High Psat: +38. dbm Power Gain at Psat:
More informationSC5407A/SC5408A 100 khz to 6 GHz RF Upconverter. Datasheet. Rev SignalCore, Inc.
SC5407A/SC5408A 100 khz to 6 GHz RF Upconverter Datasheet Rev 1.2 2017 SignalCore, Inc. support@signalcore.com P R O D U C T S P E C I F I C A T I O N S Definition of Terms The following terms are used
More information8W Wide Band Power Amplifier 1GHz~22GHz
8W Wide Band Power Amplifier 1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 50 db Typical Psat: +39 dbm Supply Voltage: +36V Electrical Specifications, T A = +25⁰C Typical Applications
More informationHILNA LS Low Noise Amplifier
HILNA LS Low Noise Amplifier 1000-3000 MHz 50 db Gain P/N: HILNA-LS (includes NW-LN-ACC-CB4MUA interface cable) NuWaves HILNA LS is a broadband low noise amplifier covering L- & S-bands, and designed to
More informationFeatures. = +25 C, Vdc = +12V
Typical Applications The VCO Module is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Lab Instrumentation Functional Diagram Electrical Specifications, T
More informationHILNA V1 Low Noise Amplifier
HILNA V1 Low Noise Amplifier 50-1000 MHz db Gain P/N: HILNA-V1 (includes NW-LN-ACC-CB02CA interface cable) NuWaves HILNA V1 is the first in its class of broadband low noise amplifiers designed to achieve
More informationFeatures. = +25 C, Vdc = +5V
amplifiers Typical Applications The HMC-C is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram v.7 HMC-C Features Ultra Low Phase Noise: -6 dbc/hz @ khz Noise Figure:
More information30 MHz to 6 GHz RF/IF Gain Block ADL5544
Data Sheet FEATURES Fixed gain of 17.4 db Broadband operation from 3 MHz to 6 GHz Input/output internally matched to Ω Integrated bias control circuit OIP3 of 34.9 dbm at 9 MHz P1dB of 17.6 dbm at 9 MHz
More information30W Solid State High Power Amplifier 2-6 GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 30W Solid State High Power Amplifier 2-6 GHz Features Wideband Solid State Power Amplifier Psat: +45dBm Gain: 50dB Supply Voltage: +36V Electrical Specifications, T A = +25⁰C, Vcc = +36V
More informationS3602C Vector Network Analyzer Datasheet
S3602C Vector Network Analyzer Datasheet Saluki Technology Inc. The document applies to the vector network analyzers of the following models: S3602C vector network analyzer (10MHz - 43.5GHz). Options of
More informationClarke & Severn Electronics Ph
Clarke & Severn Electronics Ph +612 9482 1944 Email sales@clarke.com.au www.cseonline.com.au POWER AMPLIFIER FPA-22-0001 - 43-46GHz FPA-15-0001- 55-65GHz FPA-12-0001- 71-77GHz FPA-10-0003 - 75-110GHz FPA-10-0004
More information50 MHz to 4.0 GHz RF/IF Gain Block ADL5602
Data Sheet FEATURES Fixed gain of 20 db Operation from 50 MHz to 4.0 GHz Highest dynamic range gain block Input/output internally matched to 50 Ω Integrated bias control circuit OIP3 of 42.0 dbm at 2.0
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Wide Band High Power Solid State Power Amplifier 2GHz~6GHz Electrical Specifications, TA = +25⁰C, Vcc = +28V Features Gain: 42 db min Output power +47dBm typical High P1dB: +45dB m Full Band Supply Voltage:
More informationOven Controlled Crystal Oscillator OCXO SERIES 8100
FEATURES IEEE 1588 compatible Frequencies up to 100 MHz ELECTRICAL SPECIFICATIONS Frequency Range* fo 5.000 100.000 MHz Supply Voltage Vs Vs ±5% Power Consumption Warm-up Time Frequency Calibration Frequency
More information12B04A L- & S-Band Bidirectional Amplifier
NuPower Xtender TM 12B4A L- & S-Band Bidirectional Amplifier Watt CW 2. Watts Linear, % EVM @ 34 dbm 1. GHz - 2. GHz P/N: NW-BA-12B4A (includes NW-BA-ACC-CB9MA) The NuPower Xtender TM 12B4A is a small,
More informationPreliminary Short Specification for RCA0727H50D1
Preliminary Short Specification for RCA077H0D RESTRICTION ON USE, DUPLICATION, OR DISCLOSURE OF PROPRIETARY INFORMATION This document contains proprietary information, which is the sole property of RFcore
More informationFeatures. = +25 C, +Vdc = +6V, -Vdc = -5V
v3.7 WIDEBAND LNA MODULE, - 2 GHz amplifiers Typical Applications The Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Industrial Sensors Functional
More information350MHz, Ultra-Low-Noise Op Amps
9-442; Rev ; /95 EVALUATION KIT AVAILABLE 35MHz, Ultra-Low-Noise Op Amps General Description The / op amps combine high-speed performance with ultra-low-noise performance. The is compensated for closed-loop
More informationParameter Min. Typ. Max. Min. Typ. Max. Units
25W Wide Band Power Amplifier 20-6000MHz Features Wideband Solid State Power Amplifier Psat: +45dBm Typical Gain: 50dB Typical Supply Voltage: +60V DC Electrical Specifications, T A =25 Parameter Min.
More informationMMA C3 6-22GHz, 0.1W Gain Block Data Sheet
Features: Frequency Range: 6 22 GHz P1dB: 18.5 dbm @Vdd=5V P3dB: 19.5 dbm @Vdd=5V Gain: 14 db Vdd =3 to 6 V Ids = 130 ma Input and Output Fully Matched to 50 Ω Applications: Communication systems Microwave
More informationKM4110/KM mA, Low Cost, +2.7V & +5V, 75MHz Rail-to-Rail Amplifiers
+ + www.fairchildsemi.com KM411/KM41.5mA, Low Cost, +.7V & +5V, 75MHz Rail-to-Rail Amplifiers Features 55µA supply current 75MHz bandwidth Power down to I s = 33µA (KM41) Fully specified at +.7V and +5V
More informationHILNA GPS Low Noise Amplifier
HILNA GPS Low Noise Amplifier 1200-1600 MHz 32 db Gain P/N: HILNA-GPS (includes NW-LN-ACC-CB02CA interface cable) NuWaves HILNA GPS is a broadband low noise amplifier designed to achieve high gain while
More informationSpectrum Analyzers R3132/3132N/3162 R3132/3132N/3162. Low cost, high performance. General-Purpose Spectrum Analyzer Adaptable to Various Applications
Frequency band R3132 9 khz to 3 GHz R3132N:9 khz to 3 GHz R3162: 9 khz to 8 GHz High signal purity: -105 dbc (20 khz offset) Total level accuracy: ±1.5 db High speed GPIB useful for high speed productions
More informationTest & Measurement Instrument Amplifiers
Test & Measurement Instrument Amplifiers DATA SHEET / 4T-101 MODELS: MPA-0G7-6G-16 MPA-0G7-6G-50 MPA-2G-6G-20 MPA-2G-6G-50 MPA-2G-18G-16 MPA-2G-18G-30 MPA-6G-18G-5 MPA-6G-18G-20 MPA-6G-18G-50 MPA-8G-12G-30
More informationCOM-POWER OPERATION MANUAL ACS W
COM-POWER OPERATION MANUAL For the ACS-250-100W 150 khz to 250 MHz 100W Power Amplifier Page 1 of 15 MANUAL_ACS-250-100W Rev. M02.15 Table of Contents Important Safety Precautions.....3 Introduction..5
More information100W Wide Band Power Amplifier 6GHz~18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz Gain db
100W Wide Band Power Amplifier 6GHz~18GHz Features Wideband Solid State Power Amplifier Psat: +50dBm Gain: 75 db Typical Supply Voltage: +48V On board microprocessor driven bias controller. Electrical
More informationRPAM0510A. 470 ~ 960 MHz Broadband Ultra Linear Power Amplifier 1. Absolute Maximum Ratings 2 : Key Features: Electrical Specifications: (at +25 o C)
47 ~ 96 MHz Broadband Ultra Linear Power Amplifier 1 RPAM51A is a broadband, high power, and high linearity amplifier. The amplifier offers exceptional +. db gain flatness, 31 db gain, 35 dbm P1dB and
More informationParameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +10
AMT-A0112 11 GHz to 18 GHz Broadband Low Noise Amplifier Data Sheet Features 11 GHz to 18 GHz Frequency Range Typical Noise Figure < 1.4 db Typical Gain 40 db Gain Flatness < ± 2 db +14 dbm P1dB Internally
More informationParameter Symbol Units MIN MAX. RF Input power (CW) Pin dbm +20
AMT-A0142 1 GHz to 18 GHz Broadband Medium Power with Low Noise Amplifier Data Sheet Features 1 GHz to 18 GHz Frequency Range Typical P1dB power > +23 dbm Gain 18 db Typical Gain Flatness ± 1 db Typical
More informationDS H01 DIGITAL SYNTHESIZER MODULE SYSTEM SOLUTIONS. Features Applications 174 x 131 x 54 mm. Technical Description
DS H01 The DS H01 is a high performance dual digital synthesizer with wide output bandwidth specially designed for Defense applications where generation of wideband ultra-low noise signals along with very
More information300MHz, Low-Power, High-Output-Current, Differential Line Driver
9-; Rev ; /9 EVALUATION KIT AVAILABLE 3MHz, Low-Power, General Description The differential line driver offers high-speed performance while consuming only mw of power. Its amplifier has fully symmetrical
More informationFeatures. = +25 C, 50 Ohm System, Vcc= 5V
Typical Applications Prescaler for 1 MHz to 13 GHz PLL Applications: Point-to-Point / Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Space & Military Functional Diagram Features Ultra Low ssb
More informationAOM Driver A35-Series
AOM Driver A35-Series 5 Watt RF Drivers for Acousto-Optic Modulators The A35xxx RF driver series provides up to 5 Watt output power. Various types cover a frequency range from 40 to 350 MHz. The maximum
More informationEfficiency: 68% Temperature Range: +0 to 60 C Max VSWR: 5:1. Class: Supply Voltage:
Part Number Revision 2.C Release Date July 11 2007 Revision Notes - updated new format Amplifier Name Technical Specifications Summary Frequency Range: P1dB: Class: Supply Voltage: 88-108 MHz 750 Watts
More information100 Hz to 22. HP 8566B Spectrum Analyzer. Discontinued Product Support Information Only. Outstanding Precision and Capability
Discontinued Product Support Information Only This literature was published years prior to the establishment of Agilent Technologies as a company independent from Hewlett-Packard and describes products
More informationKU-BAND OUTDOOR BLOCK CONVERTERS
Features/Options Low Phase Noise Exceeds IESS 308/309 25 db L-Band Gain Control with 0.1 db Step Auto Switch Over to an Internal High Stability REF Internal REF Tune to Match with External
More informationMQH0XX-YYDS3-ZZZ-2S. High Power 2 Channel RF Driver: For 2 Acousto-optic Q-Switches. Description: Key Features: Applications:
High Power 2 Channel RF Driver: For 2 Acousto-optic Q-Switches MQH0XX-YYDS3-ZZZ-2S Former Model Number: 390XX-YYDSZZZ-2CH-A Description: The MQH0XX-YYDS3-ZZZ-2S is a High Power RF Driver with two RF outputs
More information20W Solid State Power Amplifier 26.2GHz~34GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz.
20W Solid State Power Amplifier 26.2GHz~34GHz Features Wideband Solid State Power Amplifier Gain: 65dB Typical Psat: +43dBm Typical Supply : +24V Electrical Specifications, T A = +25⁰C, Vcc = +24V Typical
More informationGaAs, phemt, MMIC, Single Positive Supply, DC to 7.5 GHz, 1 W Power Amplifier HMC637BPM5E
9 11 13 31 NIC 3 ACG1 29 ACG2 2 NIC 27 NIC 26 NIC GaAs, phemt, MMIC, Single Positive Supply, DC to 7.5 GHz, 1 W Power Amplifier FEATURES P1dB output power: 2 dbm typical Gain:.5 db typical Output IP3:
More information30 MHz to 6 GHz RF/IF Gain Block ADL5611
Data Sheet FEATURES Fixed gain of 22.2 db Broad operation from 3 MHz to 6 GHz High dynamic range gain block Input and output internally matched to Ω Integrated bias circuit OIP3 of 4. dbm at 9 MHz P1dB
More informationRF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Reflective Coaxial SP2T Switch 50 700MHz Electrical Specifications, TA = +25 C, Vdd = +5V/-28V, TTL = 0 / +5V Description Features Wide Band Operation 50-700MHz TTL compatible driver included Fast Switching
More informationBecker Nachrichtentechnik GmbH Kapellenweg Asbach - Germany
High Dynamic 8 Way Multicoupler 100 khz 4000 MHz, 50 Ω Features - wideband - high dynamic - lossless signal distribution - auxiliary input / output - optional input high pass - compact 19, 1 U design Applications
More information6 GHz to 26 GHz, GaAs MMIC Fundamental Mixer HMC773ALC3B
FEATURES Conversion loss: 9 db typical Local oscillator (LO) to radio frequency (RF) isolation: 37 db typical LO to intermediate frequency (IF) isolation: 37 db typical RF to IF isolation: db typical Input
More information