Restraint Fittings. 2.4 Restraint Fittings. } Tiedown Single Stud Fitting. Tiedown Single Stud. Tiedown Single Stud allsafe
|
|
- Blaise Young
- 6 years ago
- Views:
Transcription
1 24 Restraint Fittings Different materials and surface qualities make them custom-fit } Tiedown Single Stud Fitting Tiedown Single Stud Tiedown single stud Ultimate load: see table, with heavy-duty track P/N Stud: zinc-plated aluminium or Ring: D d H Ultimate load: Remark F Z, Pin-hole dia3 35 grs F X F Y F XZ45 > 1330 kn / 3000 lbs F YZ45 > 1330 kn / 3000 lbs F Z > 1778 kn / 4000 lbs 41 grs grs grs Pin-hole dia3 45 grs grs grs Tiedown Single Stud allsafe Tiedown single stud allsafe Ultimate load: F X F Y F XZ45 > 1000 kn / 2250 lbs F YZ45 > 1000 kn / 2250 lbs F Z > 1250 kn / 2800 lbs with heavy-duty track P/N Steel, aluminium Pin-hole dia3 46 grs 45 grs * when installed in heavy duty track according to AS33601, loads applied individually 48
2 Combine established fitting design with additional functionality } Tiedown Single Stud Fitting special Tiedown Single Stud Breakaway dimension in inch Tiedown single stud breakaway Drawing shows P/N to -58 with two pivot levers, -63 with round ring (-11 to -19 has been super-seeded by -51 to -59) Steel, cad-plated kn load capacity lbs* min 77 grs / grs / grs / grs / grs - 58 Seat Track Fittings / grs - 63 Tiedown Single Stud Cast Steel Tiedown single stud F Y F YZ45 > 1330 kn / 3000 lbs F Z > 1778 kn / 4000 lbs Stud: steel, zinc-plated Ring: 68 grs 72 grs dimension in inch * when installed in heavy duty track according to AS33601, loads applied individually 49
3 24 Restraint Fittings Make your tie-down challenges work not only with airline tracks } Special Fittings Snap Latch Assembly Snap latch assembly Ultimate load: > 667kN / 1500 lbs when used with type XVII webbings as per MIL-W-4033 or equivalent Steel, zinc-plated 77 grs dimension in inch Footman s Loop Footman s loop Used in variety of applications for light-duty tiedown capabilities Ultimate load: > 889 kn / 2000 lbs vertical Steel wire, zinc-plated 14 grs dimension in inch Anti Shingle Device Anti shingle device F Y Malleable cast iron, zinc-plated 285 grs Force * when installed in heavy duty track according to AS
4 Seat Track Fittings High ultimate load meets various attachment opportunities International standards give you confidence in choosing the right basic design for your application } Tiedown Double and Triple Stud Fitting Tiedown Double Stud Fitting ISO grs Tiedown Double Stud Fitting for Securing Pin for securing pin ISO grs Tiedown Double Stud Fitting with Ring with ring d = 44/65 With hole for securing pin: P/N Ring: 145 grs Tiedown Double Stud Fitting with Plate with chain link and plate With hole for securing pin: P/N Link: 220 grs Tiedown Double Stud Fitting with Link and Ring with chain link and ring Link and ring: 175 grs Tiedown Triple Stud Fitting Tiedown triple stud fitting 126 grs * when installed in heavy duty track according to AS
5 24 Restraint Fittings For securely attaching straps and belts to cabin structure in all kinds of commercial and military aircrafts Can be built up as a no-loose-design solution } Attachment Plates and accessory Attachment Plates A B H d h a Ultimate load kn / lbs Remark > 133 / > 133 / 3000 Aluminium, Aluminium, to be used with P/N use P/N with P/N grs grs grs > 1778 / grs > 270 / 6000, to be used with P/N grs > 1565 / 3520, to be used with P/N grs Bushing for Attachment Plates Bushing for attachment plates To be used with plates P/N 75012, 75043, grs 52
6 20 KERL } Rings and Triangles Rings, D-Rings, Triangles D d Ultimate load kn / lbs Remark 20 4 > 889 / 2000 Stainless steel 5 grs > 889 / 2000 Stainless steel 10 grs > 1778 / 4000 Stainless steel 20 grs > 1778 / 4000 Stainless steel 30 grs > 3556 / 8000 Stainless steel 40 grs Seat Track Fittings H h d dia b Ultimate load kn / lbs Remark > 23 / grs > 800 / 1800 D-Ring 20 grs
7 24 Restraint Fittings Choose hook for different applications All made of aluminium alloy } Alluminium Hooks Hook Hook > 80 kn / 1800 lbs Aluminium, mill finish 28 grs A Snap Hook Snap hook > 115 kn / 2584 lbs Aluminium, mill finish 43 grs Hook Hook D = 8 mm > 67 kn / 1500 lbs Aluminium 8 grs * when used with appropriate webbing 54
8 To be sewed on a strap or directly fitted into airline track available for all applications, strong, lightweight and easy to use } Cam Buckles Cam Buckle Anodized Cam buckle > 89 kn / 2000 lbs Body and lever: aluminium, 80 grs Cam Buckle Cam buckle > 89kN / 2000 lbs Body and lever: aluminium, mill finish 80 grs Seat Track Fittings Cam Buckle with Hook Cam buckle with hook > 67 kn / 1500 lbs Body, lever and hook: aluminium, 92 grs Cam Buckle with Single Stud A Cam buckle with single stud > 711kN / 1600 lbs Frame: aluminium, Stud: galv steel aluminium 123 grs * when used with appropriate webbing 55
2.4 Restraint Fittings. Restraint Fittings
24 Restraint Fittings Restraint Fittings 44 Best in class allsafe JUNGFALK provides only high quality fittings Made in Germany Integrated buckle with fitting Standard single stud fitting Our in-house production
More information2.3 Panel and Stanchion Fittings Panel and Stanchion Fittings
23 Panel and Stanchion Fittings Panel and Stanchion Fittings Quick Change (QC) Inch Thread Metric Thread 30 Panel and Stanchion fittings are used for all type of installations on seat and cargo tracks
More informationPanel and Stanchion Fittings. Quick Change (QC) Inch Thread Metric Thread
Panel and Stanchion Fittings Quick Change (QC) Inch Thread Metric Thread 32 Panel and Stanchion fittings are used for all type of installations on seat and cargo tracks of fixed wing airplanes and helicopters,
More informationCOMPONENTS AND ACCESSORIES FOR FITTING TIPPERS
Hinges for aluminium side boards M 15020 Raw light perforated support M 15010 Zinc-plated light double opening hinge X 40070 Zinc-plated head cap screw 8x20 M 15030 Light raw locking plate M 15620 Zinc-plated
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More information>> ACCESSORIES 5 2 METALPLAST-SOPRANA
CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE 127013
More information>> ACCESSORIES 5 2 METALPLAST-SOPRANA
1 CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE
More informationQuarter-Turn Fasteners
Solutions Inc. SU-2300 Line Quarter-Turn Fasteners MIL-F-5591C * Approved The SU-2300 Line fasteners are designed for aircraft use and are used on external access panels and internal equipment. They are
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationTransmission Line Support Systems
Antenna Support Bracket for transmission line The Antenna Support Bracket angle mounts directly to a 4-1/2" (114 mm) OD antenna pipe mount or tower leg. This is ideal for supporting transmission line runs
More informationPunch Type Clamps. 116 Clamp guards provide a smooth ID when applied to Punch-Lok center punch hose clamps. PUNCH-LOK SPECIAL ORDER NON-STOCK CLAMPS
Hose Scribe Punch Type Clamps Hose Scribe 114 HOSESCRIBE Hose Identification System The First Self-Contained,Computerized Hose Identification Tag engraving System Three Easy Steps 1. Insert one of three
More informationBeam and Purlin Clamps Beam Clamps
Metal Framing & Cable Tray Steel City Hangers, Clamps & Fasteners Beam and Purlin Clamps Beam Clamps Fits beam flanges to 2" Supports 4" and 8" threaded rod, S-hooks, electrical boxes, conduit and bridle
More informationSPECIFICATION SHEETS. DOUBLE Gate SETUPS
SPECIFICATION SHEETS DOUBLE Gate SETUPS Hi-Performance Hardware DOUBLE gate aluminium frame 38 x 25mm; 40 x 40mm; 50 x 50mm shs Frame Dependent on Gate Size D & D technologies self-closing hinges genuine
More informationR-LOC Stainless Steel Products
R-LOC Heritage R-LOC Signals Telecom Sub-Sea Utilities Power Gen Oil & Gas Shipping & Cargo Transportation Military RC Series Strapping Systems Used in less demanding applications where minimizing leaks
More informationWESTERN WIRE PRODUCTS
WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing
More informationTel / (USA & CANADA) /
Tel.58.847 / 8.388.459 (USA & CANADA) / Email sales@msdiscounttool.com MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to
More informationDown Stage Right -Theatrical and Entertainment Rigging Supplies
Shackle Plates There are five uniquely different designs in the Shackle Plates Dynasty. Each one allows you the freedom of choice as you design the rigging requirements of your scenery, as well as meeting
More informationPARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
More informationSCREWED FITTINGS TRACK FITTINGS RANGE SCREWED FITTINGS P 3 SEMI-AUTOMATIC FITTINGS P 9 AUTOMATIC FITTINGS P 13 AVAILABLE SOON P 19 CONCEPTS P 23
TRACK RANGE SCREWED The 20 years to come for aviation industry will offer great opportunities to create new seat concepts and to answer to the growing demand from Final Assembly Lines for time savings,
More informationtable of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops
table of contents Square Track & Accessories Pages 4-7 Square Track Options Page 4 Light Duty Track Page 4 Square Track Brackets Page 5 Square Track Accessories Page 5 Square Track Trolleys Page 6-7 Offset
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationLEVER HANDLES MORTICE KNOBS PULL HANDLES GATE FURNITURE FRONT DOOR TEE HINGES AND HINGE FRONTS WINDOW FITTINGS CABINET HARDWARE ACCESSORIES CREATION
O L D H I L L I R O N W O R K S B L A C K A N T I Q U E C A S T I R O N 1 2 O L D H I L L I R O N W O R K S O L D H I L L I R O N W O R K S C O N T E N T S P A G E P A G E P A G E P A G E P A G E PAGE
More informationSTEVENS SUBPLATES. STEVENS ENGINEERING, INC. TOLL-FREE WEB FAX
STEVENS SUBPLATES Spacing of hole patterns on Stevens accessories is identical to the pattern on Stevens Subplates. Insertion of the pull dowels thru bushed holes in the accessory into corresponding bushed
More informationProduct Dimensions (mm) Overall length (including any bend) Pre Galvanised - 1.4mm thick x 36mm wide. Declared values for the TRS strap
TECO Straps TRS The Ron Sammons The Ron Sammons is lightweight to handle yet retains its structural strength so it can be used instead of a traditional Heavy Duty Strap for providing lateral restraint
More informationCatalogue. Locks for aluminium. The global leader in door opening solutions
Catalogue Locks for aluminium The global leader in door opening solutions Summary Locks for aluminium 1 POINT LOCKS............................................................ 2 3 POINTS LOCKS...........................................................
More informationhidden perfection SYSTEM ONE
hidden perfection APPLICATIONS System One is the perfect solution for 30º rotating doors and in combination with door frames: TABLE OF CONTENTS FRITSJURGENS 05 Hidden perfection 0 Heavy-duty performance
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4:
More informationHeckmann Building Products Inc. DOVETAIL SLOT AND ANCHORS SPECIFICATION SECTION MASONRY ANCHORS AND ACCESSORIES PART 1 GENERAL
Heckmann Building Products Inc. DOVETAIL SLOT AND ANCHORS SPECIFICATION MASONRY ANCHORS AND ACCESSORIES PART 1 GENERAL SECTION 04085 1.1 SECTION INCLUDES NOTE: Delete items below not required for project.
More informationFine Builders and Home Hardware
Fine Builders and Home Hardware Since 1876, IVES has been manufacturing fine builders and home hardware with a tradition of product quality and customer service that has established them as an industry
More informationMAXIMA TRADITIONAL JUST ASK FOR THE WOOD GATE HARDWARE QUICK & EASY TO INSTALL AVOID TYPICAL INSTALLATION PROBLEMS END USER SATISFACTION
ORNAMENTAL GATE HARDWARE JUST ASK FOR THE MAXIMA TRADITIONAL QUICK & EASY TO INSTALL Patent No. 4,871,203 No. 4,690,440 j j j j j PRE-ASSEMBLED You do not have to put it together EASIEST INSTALLATION Two
More informationSection MULTIPOINT LOCKS
1 Section MULTIPOINT LOCKS 1 MULTIPOINT LOCKS / G000 Multipoint Index Introduction How to Specify Introduction Multipoint Locks Features & Functions Photo Gallery Range Table High Security The new high
More informationIntroduction: The T30069 Center Punch Tool installs BAND-IT 3/8" and 5/8", 201 Stainless Steel and Galvanized Carbon Steel clamps.
Instruction Manual Introduction: The Center Punch Tool installs BAND-IT 3/8" and 5/8", 201 Stainless Steel and Galvanized Carbon Steel clamps. Table of Contents: 1. Introduction & Safety Practices 2. Operating
More informationLOCKSMITHING AND DOOR HARDWARE
LOCKSMITHING AND DOOR HARDWARE Gestión de Compras have the means to produce locksmithing parts and a wide variety of products of hardware for doors, windows or furniture with the desired quality, material...
More informationSteel Construction & Steel Construction & Tools
Steel Construction & Klein has combined unique design features with skillful engineering and manufacturing to create a superior line of steel construction tools. These tools are exceptionally rugged, with
More informationSwing over bed 17.3" Center height 8.6" Swing over cross slide 9.4" Distance between centers 39.3" Width of bed 11.8"
MODEL KL1640 PLUS Swing over bed 17.3" Center height 8.6" Swing over cross slide 9.4" Distance between centers 39.3" Width of bed 11.8" Spindle speed L:50-355 rpm, H:352-2500 rpm Spindle number 2 Spindle
More informationIntroduction: The T30069 Center Punch Tool installs BAND-IT 3/8" and 5/8", 201 Stainless Steel and Galvanized Carbon Steel clamps.
Instruction Manual Introduction: The Center Punch Tool installs BAND-IT 3/8" and 5/8", 201 Stainless Steel and Galvanized Carbon Steel clamps. Table of Contents: 1. Introduction & Safety Practices 2. Operating
More informationIndustrial Grade Construction, Reliability & Performance
INDUSTRIAL Pulley BLOCKS Industrial Grade Construction, Reliability & Performance Ronstan s offer a high quality, reliable solution for a myriad of applications. Full stainless steel housings and attachment
More informationSilver Ball Matrix BGA Socket
A1 corner 4.600 Silver Ball Matrix BGA Socket Features Wide temperature range (-55C to +0C). Current capability is 4A per pin. Over 40GHz bandwidth @-1dB for edge pins. Low and stable contact resistance
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationClamping bolts Eccentrical cams clamping units
2.3 Shaft Clamping bolts Eccentrical cams clamping units 2.9 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.3 Clamping bolts, Eccentrical cams, Shaft clamping units Page 641 2.3 Clamping bolts, Eccentrical cams, Shaft
More informationCopper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
More information8" PIVOT. Model 8000 Pivot - Prior to Feb 2002
" PIVOT Model 000 Pivot - Prior to Feb 00 " Pivot Table of Contents Description Rev. # Pg. # Overall Assembled View... 0-0... Legs & Braces... 0-0... Ladder... 0-0... Collector Ring "J" Tube... 0-0...
More informationFASTENERS 701L, 701L-ASS 701L-C. Over Centre Fasteners 701 Series. Over Centre Fasteners 701 Series
1 2 Over Centre Fasteners 701 Series 701L, 701L-ASS 701L - Cold Rolled 701L-ASS - 316 Stainless 701L - Zinc Plated 701L-ASS - RAW 41g Padlockable Suits Strikers 30Z & 30-ASS Ø 4.3mm Over Centre Fasteners
More informationPRESENTATION. All machining Repetitive machining. The choice of a wide range of varied clamps that correspond to the individual s needs
KOPAL PRESENTATION Vertical pressure clamping System KOPAL With neither riser block nor adjusting required, the system allows a continuous adaptation of the clamping height whilst retaining the clamping
More informationMax. Rec. Load. Wt. Per Inch lbs. kn lbs. kn lbs. kg. Wt. Per Inch lbs. kn lbs. kn lbs. kg 750 F (399 C)
FIG. 10 FIG. 15 & 15L Function: Designed for use in pipe hanger assemblies. (Type 304 or 316 Stainless Steel upon request) Ordering: Specify figure number, rod size, length (), material, and finish. 650
More informationGreenslade & Company Rockwell Hardness Tester, Dial Type
Greenslade & Company Rockwell Hardness Tester, Dial Type Greenslade Hardness Tester Operating Instructions & Parts Manual Please read and save these instructions. Read carefully before attempting to assemble,
More informationCENTRIFUGAL PUMPS FRAME MOUNT 13" FEATURES
FEATURES Volute: Cast iron for heavy-duty service; back pullout design; can be rotated for ease of installation; 6 x 8-13 and 8 x 10-13 are split volutes for reduction in radial bearing load Impeller:
More informationCable & Bolt Cutters. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P Cable & Bolt Cutters r o f e s s i o n a l s. Klein meets and exceeds the highest of standards to create great cable and bolt cutters. Offering greater cutting power, clean and precise cuts, and
More informationAriel Hand Bag Pattern
Ariel Hand Bag Pattern By Aimee Larsen for HomeSpun-Threads Materials: 1 Yard inside fabric 1 Yards Outside Fabric ¼ Yard for Straps and Flap 1 Yard Heavy Fusible Interfacing 1 D-Ring & Clip Cut & Iron
More informationSERVICE INSTRUCTIONS :
1 HAROLD HABEGGER SA TÉL. ++41 32 497 97 55 INTERNET: www.habegger-sa.com FABRIQUE DE MACHINES FAX ++41 32 497 93 08 E-MAIL: contact@habegger-sa.com OUTILLAGE ROUTE DE CHALUET 5/9 CH-2738 COURT (SUISSE)
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More informationSwivel Hoist Ring RIGGING ACCESSORIES. Color coded to distinguish between UNC (Red) and Metric (Silver) thread types.
RIGGING ACCESSORIES Color coded to distinguish between UNC (Red) and Metric (Silver) thread types. Available in UNC and Metric thread sizes. UNC threads available in sizes from 800 pounds to 100,000 pounds,
More informationhidden perfection SYSTEM 3
hidden perfection APPLICATIONS System 3 is the perfect solution for 360º rotating doors: TABLE OF CONTENTS FRITSJURGENS 05 Hidden Perfection 06 Perfection all around 09 Designed to stand the test of time
More informationTable of Contents. Prime Industries, Inc.
MARINE HARDWARE Table of Contents Deck Cleats...1-2 Chocks...2 Deck Fills...3 Top Fittings... 4-6 Pull Pins & Accessories...6-7 Noise Reduction Top Fittings... NEW!...7 Snap Hooks & Additional Hardware...8
More informationMaintenance. Equipment for general applications in the work place
Equipment for general applications in the work place 184 Pipe Wrenches Heavy Duty Forged steel jaw provides maximum strength. Full floating hook jaw, provides instant grip, easy release. Large knurl and
More information4Ornamental Fence Hardware
Ornamental Fence Hardware Phone: (813) 988-2628 Fax (866) 988-365 www.nationwideindustries.com fence@nationwideindustries.com Ornamental Fence Hinges What would your ideal supplier look like? Would they:
More informationM2 Antenna Systems, Inc. Model No: HFTB6MXP20-2X2
M2 Antenna Systems, Inc. Model No: HFTB6MXP20-2X2 FRONT OF SYSTEM REAR OF SYSTEM SPECIFICATIONS: Model... HFTB6MXP20-2X2 Band... 6M Antenna... 6MXP20 T-Brace... Y Cross Boom Dia... 4.5 Wind Load w/o Ant.....
More informationConcealed Headlights Restoring Concealed Corvette Headlights
Concealed Headlights Restoring 1968-1972 Concealed Corvette Headlights Hidden headlights and their mechanisms need attention every now and then. The following is a booklet to restore 1968-72 headlights.
More informationhidden perfection SYSTEM 3
hidden perfection APPLICATIONS System 3 is the perfect solution for 360º rotating doors: TABLE OF CONTENTS FRITSJURGENS 05 Hidden Perfection 06 Perfection all around 09 Designed to stand the test of time
More informationOpen shipping crate and separate all of the different parts. Over The Top Shelters LLC
ASSEMBLY INSTRUCTIONS FOR MODEL SH122110GN and SH122110GY Open shipping crate and separate all of the different parts. Count each part and match up with parts list. Shortages or damaged parts should be
More informationKEY HOLDERS 48 L. Set-up charge $56.00 (V) per color/area for decoration option pricing, please go to page
KEY HOLDERS 48 L KEY HOLDERS 1811 Rectangular metal key holder with zinc alloy. Iindividual box. Laser engraving included. Print info : 1 3/16" x 9/16" Size : 1 7/8" x 1 1/16" x 7/32" 60 125 250 500 4.29
More informationUL / FM E-1 FIRE PROTECTION PRODUCTS INDICATOR POST FEATURES. *Applies to "ORDER LENGTH" codes B through F; code A has 22" adjustment.
UL / FM MUELLER Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also, the Indicator
More informationFASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S. Which FERO Tie Systems Require Fasteners?
FASTENERS C O M P AT I B L E W I T H F E R O T I E S Y S T E M S Which FERO Tie Systems Require Fasteners? Structural Actions: Fastener,, or Both? With the exception of FERO tie systems that are directly
More informationCaptive Quarter-turn Fasteners Continuous Receptacle Strip MIL-F-25173A * APPROVED
Solutions Inc. PA-3500 Line Captive Quarter-turn Fasteners Continuous Receptacle Strip MIL-F-25173A * APPROVED The DFCI PA-3500 Line of fasteners combine the operating convenience, predictable clamping
More informationReplacement of Pitch Link Retainer and Service Improvement of the Pitch Control System. Effectivity: Helicopters manufactured prior to January, 1981
Page 1 of 12 Date: December 2, 1981 Subject: Models: Replacement of Pitch Link Retainer and Service Improvement of the Pitch Control System F-28C and 280C Effectivity: Helicopters manufactured prior to
More informationTOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...
TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49
More informationCable Ties and Accessories
3M Cable Ties are designed to secure wire bundles and harness components quickly, without slipping. Featuring a self-locking head and a locking mechanism, they are designed to handle temperatures up to
More informationFLEXIBLE 5 RAIL. year WHITE BLACK BROWN. CenFlex flexible fence systems provide strength and safety at a lower cost for moderate installation budgets.
FLEXIBLE 5 RAIL flexible fence systems provide strength and safety at a lower cost for moderate installation budgets. year LIMITED WARRANTY WHITE BLACK BROWN WHAT MAKES Centaur The Horse Friendly Fence
More informationNORTH AMERICA ONLY PIPE SLUG CHUTE DETAILS ALL DIMENSIONS IN INCHES
"B" B. C. PIPE SLUG CHUTE DETAILS ALL DIMENSIONS IN INCHES PVC - DWV PIPE FITTINGS FOR "X" SOC. HD. SCREW (N) HOLES "D" "C" "A" O.D. ALTER IF CONSTRAINED BY SPACE LIMITATION. (2) MIN. FASTENING HOLES REQUIRED.
More informationPole Line Hardware COOPER POWER SERIES. Pole Hardware Catalog Data CA325002EN. Contents
Pole Hardware Data C325002EN Supersedes January 2016 Pole Line Hardware COOPER POWER SERIES Contents FSTENERS....2 Carriage bolts....................................... 2 Double-arming bolts...3 Machine
More informationStandard CATALOGUE 2018
Standard Clamping Elements CATALOGUE 2018 Company history 1890 Company founded as a lock manufacturer by Andreas Maier. 1920 Product range extended to include spanners. 1928 Production line assembly of
More informationfencing fencing winders & strainers 110 timber connectors 111 straps & brackets 112 fence fittings 118 fencing tools 121 fence post supports 124
1 winders & strainers 110 timber connectors 111 straps & brackets 112 fence fittings 118 tools 121 fence post supports 124 109 order online at www.hinges.co.uk winders & strainers NO.423 BOLT LOCKING STRAINERS
More informationFLOOR ANCHOR SYSTEM APPLICATIONS L TRACK APPLICATIONS
FLOOR ANCHOR SYSTEM APPLICATIONS Sure-Lok recommends the following for floor anchor system layout and installation. These recommendations are not all-inclusive and may not be applicable to every system
More informationMeter Box Access Solutions
Meter Box Access Solutions Table of Contents Meter Box Access Solutions Oval Meter Boxes Round Meter Boxes Rectangular Meter Boxes Meter Pits Adapter Rings Meter Lids Meter Covers, Plates and Lids Accessories
More informationSECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 52-4777 or visit www.grizzly.com/parts to check
More informationTRACTOR AND EARTH MOVING MACHINES CABINS COMPONENTS
CATALOGUE 2018 TRACTOR AND EARTH MOVING MACHINES CABINS COMPONENTS DESIGN AND CONSTRUCTION ON DEMAND CHANGES AND ADAPTATION 2 METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490
More informationPerformance Posts. For durability, dependability and unsurpassed quality, they re the way to go.
Performance Posts. For durability, dependability and unsurpassed quality, they re the way to go. SQUARE SIGNPOSTS Square Signposts ± ' ± ± ± ± ± ± ± ± ± ± ± ± ± Performance Posts. A new small sign support
More informationGround Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
More informationClamps. Preformed Clamping Systems. Clamps. Band-It. Band-It
Preformed Clamping Systems As industrial hose made of stiffer, thinner, thermoplastics replace soft, spongy, thickwalled rubber, a new generation of hose clamps has been developed to prevent leak problems.
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationOperating Instructions and Parts Manual 10-inch Table Saw
Operating Instructions and Parts Manual 10-inch Table Saw Model 66 shown with optional extension table and legs, mobile base, and motor cover WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part
More informationDrake & Wrigley s extensive range of architectural hardware is produced entirely in commercial grade nonferrous metals, primarily solid brass, zinc and stainless steel. A wide choice of colours can also
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-83723/59D 26 August 2010 SUPERSEDING MIL-DTL-83723/59D 29 June 2009 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), PROTECTIVE COVERS, PLUGS, (FOR
More informationRollins Product Catalogue 1 October March Tools for the Professional
Rollins Product Catalogue 1 October 2013 31 March 2014 Tools for the Professional Product Catalogue 1 October 2013 31 March 2014 Johnson Level & Tool Mfg. Co., Inc. was founded in Milwaukee, Wisconsin
More informationCSP-03G-003 High-Frequency Coaxial Test & Measurement Probe Model Number: CSP-03G-003, Replacement Probe: SPL-03G-043, SPL-03B-121 Target Connector: CPT-03-50-2 Applications: Designed for use in interconnect
More informationFULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
More informationLIGHTING STAND. 483T 3 SCT Wind-Up Stand w/auto Self-Locking device
483T 3 SCT Wind-Up Stand w/auto Self-Locking device 181cm 71.3 128cm 50.4 380cm 149.7 30kg 66.1lbs 22.4kg 49.4lbs KC-100 3 sections. Dia.: 55mm, 45mm, 38mm Leg dia.: 30mm Chrome plated steel stand w/geared
More informationSewing Instructions for Vest 9302 Sizes 34,36,38, 40,42. Length in Back: About 40 cm (about inches)
Sewing Instructions for Vest 9302 Sizes 34,36,38, 40,42 Length in Back: About 40 cm (about 15.74 inches) Fabric needed Glencheck, 150 cm (about 59 inches) wide, 0.60 meters (about 23.62 inches) long for
More informationMATERIAL COMBINATION NUMBER 2: Corrosive environment requiring harder, wear-resistant seating faces and resistance to dezincification.
Cast Iron Slide Gates Spec Sheet General The contractor shall furnish and install the following cast iron slide gate assemblies as listed on the Gate Schedule and detailed on the manufacturer s drawings.
More informationPole Line Hardware. Heavy-Duty Spool Rack (200 A) No. of Wires. Anti-Vibration Kit for Spool Rack. Heavy-Duty Spool Rack (400 A) No.
Heavy-Duty Spool Rack (200 A) SS401E - SS802E - SS803E - SS804E No. of Wires Overall Length SS401E 1 9-1/2 300 136.3 10 SS802E 2 17-1/2 520 236.3 SS803E 3 25-1/2 780 354.5 5 SS804E 4 33-1/2 1040 472.7
More informationModular transfer system. PDF- Catalog Modular Transfer System
Modular transfer system PDF- Catalog Modular Transfer System 1 Modular Transfer System TLM 1000 156, route de Lyon 38300 DOMARIN FRANCE Phone (33) 4 37 03 33 55 Fax (33) 4 37 03 33 59 September 2001 edition
More informationPull-down clamps. No Low height clamping jaws, model Bulle
Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.
More informationInternational Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS 1 ABOUT THE COMPANY VISION STATEMENT We strive to exceed our customers expectations through leading edge technologies
More informationChain, Rope & Accessories
A Perry Product Guide A range of both steel and plastic chain, including accessories. This range includes:- Steel Chain Plastic Chain Security Chain Accessories for Plastic Chain Accessories for Steel
More informationRBC Precision Products
Large Rollers, Wrist & Planet, Plated/Coated & Rollers RBC Precision Products Innovation. Commitment. Quality. Dowel, Loose Needle Rollers, RBC has been producing bearings in the USA since 1919. In addition
More informationFASTENERS 701L, 701L-ASS 701S, 701S-ASS. Catch Fasteners 700 Series. Catch Fasteners 700 Series
2 1 Catch Fasteners 700 Series 701L, 701L-ASS 701L - Cold Rolled 701L-ASS - 316 Stainless Zinc Plated and Stainless available (Electrolytic Brightening) 41g Padlockable Suits Strikers 30Z & 30-ASS Ø 4.3mm
More informationMORTISE LOCKS SPECIFICATIONS RESIDENTIAL SERIES
AVAILABLE FINISHES 15 SATIN NICKEL MORTISE WITH ESCUTCHEON TRIM MORTISE WITH SECTIONAL TRIM 19 MATTE BLACK 26 POLISHED CHROME 26D SATIN CHROME FEATURES UL LISTED FOR USE ON 3-HOUR FIRE DOOR (SINGLE OR
More informationThuys Engineering Parts Lists
Parts Lists The list below was developed for AJS parts, but all nuts and bolts are Cycle Engineering Institute threads that are common on all British motorcycles built before 1970. Contact Details FRAME
More informationSECTION CHAIN LINK FENCING AND GATES AND SOFTBALL BACKSTOP
1 1 1 0 1 0 1 0 1 SECTION 1 1 CHAIN LINK FENCING AND GATES AND SOFTBALL BACKSTOP BASED ON DFD MASTER SPECIFICATION DATED /01/ P A R T 1 - G E N E R A L SCOPE The work under this section shall consist of
More informationT3ss Gas Powered Tool
T3ss Gas Powered Tool Gas Technology Single Pin Gas Tool Fuel Injection Cross Over Technology /SUGGESTED SPECIFICATIONS Crossing Over from Powder to Gas THE PREMIER FASTENING SYSTEM FOR THE ELECTRICAL
More information