STAR TOOL SUPPLY / GRAND TOOL SUPPLY

Transcription

1 MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4: clamping ratio. Built-in V blocks for round or rod stock. Full support, no loose pads to walk off center. Copper plated jaws & screws are ideal for welding clamps. Max. Open Closed A B E 4 / / /8 -/ /* -7/ -3/ /4-3/ /* -/4 3-3/ /8 3-3/ * 4-/ 5-/ /8 5-/ *Deep throat type. ROUND HANDLE CLAMPS SERIES 7: Tel: / Fax: Huyler St / So. Hackensack, NJ 7 USA C CLAMPS SERIES 38: HEAVY DUTY C-CLAMPS Drop forged and designed with a deep throat. Copper plated screw and swivel pad to prevent weld splatter from sticking to them. Screw Max. Min. Dia. -/4 / /8 / /8 5/ /8 3/ /4 3/ /4 3/ /4 7/8 97 SPRING CLAMPS SERIES 79: Steel Spring Clamps Nickel plated for durability and corrosion resistance. Tempered steel spring maintains substantial pressure at the jaw tips. Ergonomic-shaped handles and jaws are available with polyvinyl covers for comfort, as well as protection of workpieces. Max. Open. Pipe Size Overall Length Ship Case Qty. Ship Wgt. Ea. MODEL 3 Steel Spring Clamps with protective handles & grips /4 3/4 / * 7939 *LIMITED QUANTITY Max. A -/ Open B 3/8 / -/8 -/8 Closed E 3/8 / -/ PARALLEL CLAMPS SERIES 37: QUICK ACTING FIXTURE CLAMPS SERIES 7: Jaws are made of hardened and tempered steel. Clamps are equipped with spring clips. Jaw Jaw Length Each A B.9 - / T-slot Mounting.98 - T-slot Mounting C -/ -/ 3-3- E 4 4-/8-7-/ /4 9-3/4 -/ 95 -/ / / /

2 Tel: / Fax: STAR TOOL SUPPLY / GRAND TOOL SUPPLY 5 Huyler St / So. Hackensack, NJ 7 USA C CLAMPS STEEL, NATURAL FINISH SERIES 93: Deep Pattern Parco-Lubrite Finish Our most popular and versatile pattern. Frame is drop forged Carbon Steel; all other parts are machined from Carbon Steel. Screw Min.Proof Max. Min. Dia. Test, Standard Screw -/ -3/8 3/ / /8 / /4 3/ /8 3/ / 3/ /8 3/ /4 7/ Full Length Screw 5-3/8 3/ /4 7/ Deep Pattern Zinc Plated Design and materials are exactly the same as Parco-Lubrite finish. However, forcing screw is zinc plated to resist the adhesion of welding splatter. Screw Min. Proof Max. Min. Dia. Test, Standard Screw -/ -3/8 3/ / /8 / /4 3/ /8 3/ / 3/ /8 3/ /4 7/ Full Length Screw 5-3/8 3/ /4 7/ Deep Pattern High Visibility Finish Same in all respects-except for finish- as other Deep C- Clamps, above. However, High Visibility Clamp Frames are finished in your choice of Safety Yellow or Safety Orange high-gloss bakedon enamel. Screws and handles are finished in black. Easy to see; hard to lose or misplace. High Visibility C-Clamps are furnished with standard screws only. Tool Maker s Pattern Parco-Lubrite Finish Small, lightweight C-Clamps are ideal for pattern making, wood working and other light duty applications. Both frame and screw are drop forged from Carbon Steel. Square below thumb screw head allows screw to be set up extra tight with a wrench. Screw Min. Proof Max. Min. Dia. Test, Yellow Frame -/ -3/8 3/ / /8 / /4 3/ /8 3/ / 3/ /8 3/ /4 7/ Orange Frame -/ -3/8 3/ / /8 / /4 3/ /8 3/ / 3/ /8 3/ /4 7/ Screw Max. Min. Dia. / 5/.5 3/ 3/ / 3/ /4 -/8 7/ While we show only the most popular ARMSTRONG items we can supply their entire range of products; please inquire. 57

3 C CLAMPS SERIES 93: Tel: / Fax: Huyler St / So. Hackensack, NJ 7 USA Heavy Duty Pattern The strongest C-Clamp made. Square-head screw has hardened point. Screw does not include a handle it must be tightened with a wrench. Extra long hub helps prevent springing even under great stress. Inches Max. Min / -5/ -3/4-3/8 3-5/ 4-5/8 5-3/8-5/8 8-/4-3/8 -/ / 5/8 -/4 -/ -/4 4-/4-3/8 Heavy Duty Pattern, With Full-Length Screw Inches Max. Min /8 3-5/ 4-5/8 5-3/8-5/8 8-/4-3/8 -/ 5/8 5/ -7/ -9/ -7/ -7/8 3-/4 3 3-/8 3-/ -9/ -7/ -7/8 3-/4 3 3-/8 3-/ Screw Dia. 3/8-7/ - 4 5/8-3/4-7/ /8-7 -/4-7 -/4-7 -/4-7 Screw Dia. 3/4-7/ /8-7 -/4-7 -/4-7 -/4-7 Min. Proof Test,,8 5, 8,75,5,5, 3,8 7,5 3,5 35, 4, Min. Proof Test,,5,5, 3,8 7,5 3,5 35, 4, Drop Forged Carbon Steel T-SLOT CLAMPS SERIES 93: A unique tool for holding down work on all machine tools equipped with slotted tables. Because they are drop forged from Carbon Steel, Armstrong T-Slot Clamps embody strength far beyond that required for normal clamping operations. And should any slight spring ever occur under extreme conditions, the drop forged frame will not take a permanent set. It s therefore safe to predict your Armstrong T-Slot Clamps will outlive the machine tools you intend to use them on. And over the years, they ll save countless hours of operator set-up time, paying for themselves many times over. Screw features Armstrong s patented ball-joint swivel padthe most secure and permanent system for locking pad to screw. Pad is V-notched to aid clamping of small rounds. T-Slot Clamp body, screw and handle are black finish. Each clamp is furnished with one T-Slot Bolt, Washer, and Hex Nut. T-Slot Bolt Clamping In. Size, In. In to -/4 to 3-/4 to 3-/4 / x -/ 5/8 x 3/4 x -/ -/4 -/ SET-UP WEDGES SERIES 93: Lgth Width Max. Thickness Inches Inches Inches /4 /4 / 3/

4 STAR TOOL SUPPLY / GRAND TOOL SUPPLY 4 SERIES C-CLAMPS SERIES 79: Drop Forged, Regular Duty, Extra Deep This is Wilton s number one C-Clamp line. Series 4 clamps include all the Wilton innovations: drop-forged steel frame, extra throat depth, Perma-Pad, lacquer finish - plus innovative design frame geometry for maximum strength. s and Perma-Pads are black oxide coated to resist corrosion. 4 Series bodies are heat treated. and pad are replaceable. Provided in individual boxes, Wilton 4 C-Clamps are high quality tools. 8 SERIES C-CLAMPS SERIES 79: Standard - Regular Duty, Regular The 8 series is recommended at a value alternative for clamping work not requiring as much throat depth or clamping pressure as a 4 series clamp. 8 series are drop forged, equipped with Wilton Perma-Pads and a precision-cut, single-lead, Acme thread. - / /4 - / - 8 /4 - /8 - / / - /8 - Wilton exclusive Perma-Pads Hi-Tech frames - stronger and deeper throat depth. /4 / 3 /4 4 /8 5 5/ -3/ -5/ - 5/ -5/ 3-7/ / 9/ 9/ 9/ Tel: / Fax: Huyler St / So. Hackensack, NJ 7 USA Min. Proof Test Min. Proof Test Case Qty. Case Qty. Wgt. Ea. -3/4 -/4 3-3/4 5-/ -3/4 -/4 4-/ Wgt. Ea. -/4-5/8-7/8 3-7/8-3/4 8-3/ HARGRAVE C-CLAMPS SERIES 79: Super-Junior Forged C-Clamps Super Junior clamps are forged steel with heat treated frames to provide a much stronger clamp than pressed steel or malleable clamps. Steel screws are nickel plated for longer life /4 - -/ / -/ -/4 -/ -/4-3/8 -/ Min. Proof Test , 85 Case Qty. Wgt. Ea. /4 /4 /4 /4 /4 / / A SERIES C-CLAMPS SERIES 79: Carriage C-Clamps High tensile ductile alloy casting provides excellent strength in a cast clamp. The 54 series is ruggedly constructed with a hardened steel spindle. Our carriage clamp is recommended for any work load which does not require the additional depth or strength of Series 4 C-Clamps or 8 series C-Clamps. - -/ / - 3-/ / / Min. Proof Test Case Qty. Wgt. Ea. -3/4 -/ -/8 3-/4 5-7/8 8-/ 54A- / 54A-3 54A-4 54A- 54A-8 54A- 54A

5 C-CLAMPS SERIES 79: Forged, Copper, High-Visibility C-Clamps Regular Duty, Extra Deep Improved frame design allows for a higher proof test, greater throat depth, and lower overall weight. 4CS series offers a drop forged frame c-clamp with an anti-spatter, copper plated spindle, swivel pad, and cross-pin handle. Therefore, a tool that offers more uses, is easier to handle and creates less fatigue. threads are Acme roll threaded to provide user with maximum strength and clamping force. Sliding pin handle with rounded, ergonomic ends / / 5-3/8 5- COPPER PLATED L-CLAMPS SERIES 79: L-Clamps fit a wide variety of applications. Perfect for jobs that require clamping wide or high parts, or where extreme throat depth is necessary. U.S. made replaceable Perma-Pads swivel to adapt to angular workpieces. U.S. made solid steel spindles are copper plated for anti-spatter resistance. U.S. made Wilton-Grip soft rubber handles, standard on all 3/4 series models, provide comfortable grip. Improved clamping speed by sliding along rail to work. Use of L-Clamps expose less spindle screw and the clamp is less likely to twist and bend. One size L-Clamp can be used on multiple size (clamping) requirements. Tel: / Fax: Huyler St / So. Hackensack, NJ 7 USA / Min. Proof Test Wgt. Ea. -/ -3/4-3/4 4-3/4 8-/ -/ 4 H4CS H43CS H44CS H4CS H48CS H4CS H4CS Rail Size Clamping Pressure/ Wgt. Each Light Duty Copper Plated L-Clamp with Wilton-Grip Handles / x 5/ x 3/8 x 7/ x 5/3 x 5/3 x 5/3 x 5/3 -/ x / -/ x / -/ x / 5 / 3 3-3/4 5 5-/ 5-3/4 -/ 7-3/4 9 -/ 3B STG 38B STG 3B STG 3B STG 3B STG 3B STG 34B STG 33B STG 34B STG 348B STG Regular Duty Copper Plated L-Clamp with Wilton-Grip Handles / x 9/ -3/ x 9/ -3/ x 9/ -3/ x 9/ -3/ x 9/ -3/ x 9/ 3/ 3/ 3/ 3/ 3/ 3/ -/ 7-/4 7-/ 8-/4 -/4-3/4 4B STG 4B STG 4B STG 4B STG 43B STG 44B STG Heavy Duty Copper Plated L-Clamps / x 3/4-9/ x 3/4-9/ x 3/4-9/ x 3/4-9/ x 3/4-9/ x 3/4-9/ x 3/ /4 4-/ 5-/ 7-3/4 -/ 5B 5B 5B 54B 53B 54B 548B

6 ECONOMY SERIES L-CLAMPS SERIES 79: Tel: / Fax: Huyler St / So. Hackensack, NJ 7 USA Versatile, economy series L-Clamps are designed for economical repetitive clamping. Economy series offers generous throat depth, substantial clamping pressure with a competitive price. Swivel pads are cold pressed on to provide secure clamping. Black oxide spindle acts as a rust inhibiter Rail Size x 7/ x 7/ -3/ x 9/ -3/ x 9/ -3/ x 9/ -3/ x 9/ -3/ x 9/ FLOAT LOCK VISE FOR DRILL PRESSES SERIES 43: Clamping Pressure/ 5 5 Economy L-Clamps / Wgt. Each FLOAT LOCK VISE FOR BAND SAWS SERIES 43: Easy to mount in minutes. Expand the capacity of your machines - boost production in a variety of setups. Work is tightly locked, or completely released by a quick turn of the hinged handle which operates the vise jaw. Vise turns on three sides, which permits drilling many holes without removing work. The T bolt mounting clamp locks the vise securely at any position on the table, making it a dependable drill jig when large quantities of the same part are to be drilled. The mounting clamp also allows the vise to swing to the edge of the table for clamping long parts. When the vise is not in use the mounting clamp can quickly swing the vise completely off the table and out of the way eliminating the time consuming need of removal and storage. Vises come complete with removable jaw pads and mounting clamp. Jaw pads feature Horizontal and Vertical V grooves that align and grip rounds securely. Parallel grooves make for easy alignment of jigs and fixtures. Description Float Lock Safety Vise for Drill Presses with 9 capacity and Thumb Release Float Lock Safety Vise for Drill Presses with capacity and Thumb Release Optional Mounting Bracket for Drill Presses Ideal for fast setups on production pieces. With Float-Lock Band Saw Vise, you cut accurately and safely all shapes and thicknesses of material; maximum capacity. Wide angle control (like steering a motorcycle) makes intricate sawing easy. Grip or release work with simple twist of handles. Handles never need to touch the work, assuring safety. Vise also reduces blade damage. For hard-to-hold pieces, vertical cutting, automatic chain feed operation, irregular shapes and compound angle cutting. Allows intricate cutting while safely keeping hands away from the material. Removable jaw pads feature Horizontal and Vertical V: grooves that align and grip rounds securely. Parallel grooves make for easy alignment of parts. Description Float Lock Safety Vise for Band Saws with capacity 43 See our Machinery Section for Drill Presses and Band Saws. 57

7 HOLD-DOWN ACTION CLAMPS (VERTICAL HANDLE) -U -U 7-S 7-U 7-UL -S -U 47-U TOGGLE CLAMPS SERIES : S Handle Moves Bar Opens Tel: / Fax: Huyler St / So. Hackensack, NJ 7 USA -S Height Under Bar assembly must be ordered separately on Nos. 7 &. HOLD-DOWN ACTION CLAMPS (HORIZONTAL HANDLE) U 3-U 5-U 35-U Handle Moves Bar Opens Height Under Bar Please inquire for more dimensional information, line drawings, etc. 3-U 7-U 7-U 37-U 5-U 5-U 35-U lbs SQUEEZE ACTION CLAMPS * 35 7 * Trigger Release Jaw FLAT-TIP BONDED NEOPRENE CAP SPINDLE ASSEMBLIES Overall Length Dia of Tip Thread (G) -3 /4- /4-5/-8 5/-8 3/8-3/8-3/8- /-3 5/ /4- /4- Cone-Tip Assemblies available. See our website or inquire. EDP

8 STAR TOOL SUPPLY / GRAND TOOL SUPPLY PULL ACTION CLAMPS (VERTICAL HANDLE) Drawing Movement 35 TOGGLE CLAMPS SERIES : Drawing Movement Hook Adjustment PULL ACTION CLAMPS (HORIZONTAL HANDLE) Hook Adjustment 375 Tel: / Fax: Huyler St / So. Hackensack, NJ 7 USA While we show the most popular items, we can supply their entire range of products * 385* *Latch plate must be ordered separately including metric models. See our website or inquire. STRAIGHT-LINE ACTION CLAMPS Plunger Travel Plunger Thread Plunger Height /4-5/-8 3/8-5/-8 5/-8 5/-8 3/8-3/8- /-3 5/

9 HORIZONTAL HANDLE TOGGLE CLAMPS SERIES 3: Tel: / Fax: Huyler St / So. Hackensack, NJ 7 USA : Handle Moves 8, Bar 9 5 : Handle Moves, Bar 85 5 : 5 Handle Moves 5, Bar 9 5 : 75 Handle Moves 5, Bar Description A B C D E F G H I J K L M N O 5 U-bar, Flanged Base In lbs.5oz mm kg 43gr 5 U-bar, Flanged Base In lbs 4.oz mm kg 3gr 5 U-bar, Flanged Base In lbs 9.4oz mm kg 5gr 53 U-bar, Flanged Base In lbs.oz mm kg 4gr VERTICAL HANDLE TOGGLE CLAMPS SERIES 3: : Handle Moves 5, Bar 995 : Handle Moves, Bar 995 : 5 Handle Moves, Bar 95 : 75 Handle Moves 58, Bar : Handle Moves 7 *, Bar 35 * 954 Description A B C D E F G H I J K L M N O 995 U-bar, Flanged Base, In lb.4oz Straight Handle mm kg 8gr 995 Fixed, Flanged In lb 5.oz Base, Straight Handle mm kg 45gr 95 Short U-bar, Flanged In lbs.7oz Base, Straight Handle mm kg 33gr 953 U-bar, Flanged Base, In lbs.95oz Straight Handle mm kg 97gr 954 U-bar, Flanged Base, In lbs 3.oz Straight Handle mm kg 45gr *Without Roll Pin. With Roll Pin - Handle Move 58, Bar 579

10 PUSH / PULL TOGGLE CLAMPS SERIES 3: Tel: / Fax: Huyler St / So. Hackensack, NJ 7 USA : 3 Plunger Travel: -/4 in. (3mm) 95 : 8 Plunger Travel: -5/8 in. (4.mm) : 5 Plunger Travel:.3 in. (4.mm) : 3 Plunger Travel: -/ in. (38mm) : 375 : 3 : 7 : : 7 Plunger Travel: -9/3 in. (.8mm) Description A B C D E F G H I J K L M N O 95 Push/Pull In / lbs.5oz Internal Threads mm kg 3gr 5 Push/Pull In / lbs 8oz Internal Threads mm kg 8gr 59 Push/Pull In / lbs 33.oz Internal Threads mm kg 935gr 5 Plunger Clamp In 3/ / lbs 9.5oz w/ Threaded Collar mm kg 7gr 5 Plunger Clamp In / lbs 4.3oz w/ Threaded Collar mm kg 9gr 9953 Latch Type, Flanged In lbs 9.5oz Base, Straight Handle mm kg 7gr 53 Latch, Flanged Base, In lbs.5oz Straight Handle mm kg 4gr Latch, Flanged Base, In / lbs 7.oz T-Handle mm kg 9gr 538 Latch, Flanged Base, In / lbs 4oz T-Handle mm kg 8gr FLAT CUSHION-TIP BONDED SPINDLE ASSEMBLIES Part Description 955 FC-38-4 x 3/8 955 FC-434 /4- x 3/ FC-48 /4- x /8 553 FC-5 5/-8 x / 5535 FC-53 5/-8 x FC-383 3/8- x 3 / FC-384 3/8- x 4 / 555 FC-334 /-3 x 3 3/4 CONE CUSHION-TIP BONDED SPINDLE ASSEMBLIES Part Description CC-38-4 x 3/8 553 CC-434 /4- x 3/ CC-48 /4- x / CC-5 5/-8 x / 5534 CC-383 3/8- x 3 / 58 FLANGED WASHERS FOR U BAR CLAMPS ONLY Part Description 555 FW-8 For FW- For 555 FW-4 For / FW-5 For 5/ 5554 FW-38 For 3/ FW- For / 555 FW-58 For 5/8 NEOPRENE CAPS Slip on Standard Adjustable Heads Part Description 55 NC-4 For /4 553 NC-5 For 5/ 554 NC-38 For 3/8 555 NC- For /