COMPONENTS AND ACCESSORIES FOR FITTING TIPPERS
|
|
- Jordan Gardner
- 5 years ago
- Views:
Transcription
1 Hinges for aluminium side boards M Raw light perforated support M Zinc-plated light double opening hinge X Zinc-plated head cap screw 8x20 M Light raw locking plate M Zinc-plated plate 1
2 Hinges for aluminium side boards M M Raw heavy perforated support Zinc-plated heavy double opening hinge X Zinc-plated head cap screw 8x20 2 M Light raw locking plate M Zinc-plated plate
3 Hinges for aluminium side boards M Raw heavy perforated support M Zinc-plated double opening hinge for TR5 X Zinc-plated head cap screw 8x20 M Light raw locking plate M Zinc-plated plate 3
4 Hinges for aluminium side boards M Zinc-plated high double opening hinge with holes 4 M Raw heavy perforated support M Light raw locking plate
5 Hinges for aluminium side boards Printed zinc-plated high plate double opening hinge with holes DIMENSIONS mm CODE HIGH PLATE H M M M M M M M M Raw heavy perforated support M Light raw locking plate 5
6 Hinges for aluminium side boards M Piece with holes for lower profile M Stainless steel piece with holes for lower profile M Light panel arrest hook M Stainless steel light panel arrest hook Lower profile in aluminium
7 Hinges for aluminium side boards L Turned pin for aluminium washer L Zinc-plated turned pin for aluminium washer L Pin for aluminium board TR5 rear closing L Zinc-plated pin for aluminium board TR5 rear closing L Turned column ø 17 7
8 Hinges for steel side boards M Raw bilateral hinge Roma type P Raw U-bolt right side P Raw U-bolt left side P Stopped handle 8
9 Hinges for steel side boards M Raw hinge P Raw U-bolt right side P Raw U-bolt left side P Stopped handle 9
10 Hinges for steel side boards M Raw bent hinge P Raw U-bolt right side P Raw U-bolt left side P Stopped handle 10
11 Hinges for steel side boards P Light ear hinge P Heavy ear hinge L Turned pin Ø 16 11
12 Hinges for steel side boards M Raw light hinge type RAS M Raw perforated hinge type RAS M Raw heavy flap 12
13 Hinges for steel side boards M Raw hinge type RAS M Raw perforated hinge type RAS M Heavy raw locking plate 13
14 Hinges for steel side boards M Flag hinge M Triple flag hinge 14
15 Hinges for steel side boards M Lower hinge dm. 50 M Higher hinge ø 50 15
16 Hinges for steel side boards L Closure type AV block L Column type AV 16 L Closure block ø 20 L Column ø 20
17 Hinges for steel side boards L Lower closure block ø 20 L Lower column ø 20 L Closure block ø 24 L Column ø 24 17
18 Hinges for steel side boards L L Column ø 30 Closure block ø L Closure block ø 40 L Column ø 40
19 Hinges for steel side boards RIGHT P Light back hinge right side P Light back hinge left side P Light fork P Turned stopper ø 9 19
20 LEFT Hinges for steel side boards L Heavy back hinge left side L Heavy back hinge right side P Heavy fork P Stopper ø 12 20
21 Hinges for steel side boards LEFT L Closure type Marotta L Heavy back hinge left side L Heavy back hinge right side L Trilateral lock L Column for trilateral lock 21
22 Control levers for side opening RIGHT P P Complete control lever for side opening P Long drilled control lever Complete Rapid control lever for left side opening P Complete Rapid control lever for right side opening P Double stop ring 22 P Lock lever P Long pin for lever fixing
23 Pawl striker lock P Rear pawl striker P Heavy rear pawl P Light pawl with holes 23
24 P Complete kit Complete set ø 60 P Cotter pin P P P P Single fluted locking pin Twin fluted locking pin One tooth plate Two teeth plate P Sphere support ø 60 LEFT P Lateral sphere ø P P Rear sphere right side ø 60 Rear sphere left side ø 60
25 P Complete kit Complete set ø 75 P Cotter pin P P P P Single fluted locking pin Twin fluted locking pin One tooth plate Two teeth plate P Sphere support ø 75 LEFT P Lateral sphere ø 75 P P Rear sphere right side ø 75 Rear sphere left side ø 75 25
26 P Complete kit Complete set ø 85 P Cotter pin P P P P Single fluted locking pin Twin fluted locking pin One tooth plate Two teeth plate P Sphere support ø 85 LEFT P Lateral sphere ø P P Rear sphere right side ø 85 Rear sphere left side ø 85
27 P Complete kit Complete set ø 95 P Cotter pin P P P P Single fluted locking pin Twin fluted locking pin One tooth plate Two teeth plate P Sphere support ø 95 left P Lateral sphere ø 95 P P Rear sphere right side ø 95 Rear sphere left side ø 95 27
28 Tipper kit with light fork P Light fork P Light support P Different light support 28 P Light pin P Different light pin
29 Tipper kit with heavy fork P Heavy fork P Heavy support P Different heavy support P Heavy pin P Different heavy pin 29
30 Chains for side trucks L Zinc-plated chain for side boards Total lenght mm L Hook chain attack left L Zinc-plated chain with plate right side 30 L Zinc-plated chain with plate left side L Plate for zinc-plated chain
31 Zinc-plated tie rods P P P P P P Tie rod ø 12 H 600 zinc-plated Tie rod ø 12 H 800 zinc-plated Tie rod ø 12 H 900 zinc-plated Tie rod ø 12 H 1000 zinc-plated Tie rod ø 12 H 1100 zinc-plated Tie rod ø 12 H 1200 zinc-plated M Plate for zinc-plated Tie rod 31
32 Stainless steel profiles for side boards - Steel plate folded and welded by electrofusion - Supplied in raw bars from 5000 and 6000 mm. - Headboards and crossbars are supplied loose Shaped board heads Side board thickness 20/10 Shaped crossbar THICKNESS HEIGHT H LENGTH BAR WEIGHT FOR BAR CODE 2 mm mm. Kg 52 P mm mm. Kg 58 P mm. Heads Kg 1 P mm. Crossbar Kg 1 P mm mm. Kg 60 P mm mm. Kg 72 P mm. Heads Kg 1,5 P mm. Crossbar Kg 1,5 P mm mm. Kg 67 P mm mm. Kg 83 P mm. Heads Kg 2 P mm. Crossbar Kg 2 P
C13.11 HANDLES AND CONNECTION PIECES C13 SIDE HUNG WINDOWS
C13 SIDE HUNG WINDOWS C13.11 HANDLES AND CONNECTION PIECES 01.05.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationClassic Roll Tarp. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Classic Roll Tarp Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
More information77 cm. 5243/3-GA (3 pcs.) 5243/3-BO (3 pcs.)
ARCHIMEDE ST.102-4ENG SPECIFICATION Range: ARCHIMEDE Design: Caimi Lab 5203-GA, 5203-BO, 5213-GA, 5213-BO, 5223-GA, 5223-BO, 5233/3-GA, 5233/3-BO, 5241/3-GA, 5241/3-BO, 5243/3-GA, 5243/3-BO, 5245/3-GA,
More informationPUSH-PULL-PROPS. and accessories ROBUSTA-GAUKEL GMBH MOUNTING TECHNOLOGY &CO.KG
PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY ROBUSTA-GAUKEL GMBH &CO.KG MOUNTING TECHNOLOGY PUSH-PULL-PROPS AND ACCESSORIES INDEX General information...................... 3 Push-pull-prop Type
More informationClassic Roll Tarp. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Classic Roll Tarp Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
More informationINSTALLING YOUR NEW SPRING LIFT ARM KIT
INSTALLING YOUR NEW SPRING LIFT ARM KIT 1. Measure the distance that the roof is to be raised. [If your lift system is completely non-functional, you will need to calculate or estimate this distance as
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationTABLE OF CONTENTS. Impregnated... 1 NORDIC FENCE Fynbo FSC Certified... 1
TABLE OF CONTENTS Impregnated... NORDIC FENCE Fynbo FSC Certified... Iron... NORDIC FENCE Lightweight model, GENERAL... NORDIC FENCE Lightweight model, with a grid filled... NORDIC FENCE Lightweight model,
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationINSTALLATION INSTRUCTIONS, AND PARTS LIST
INSTALLATION INSTRUCTIONS, AND PARTS LIST LB20 SERIES RAMPS Link Mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 (712) 722-4868 Fax (712) 722-4779 QUESTIONS? CALL CUSTOMER SERVICE 1-800-248-3057
More informationGRAND PIANO HARDWARE AND ACCESSORIES
GRAND PIANO HARDWARE AND ACCESSORIES LID SUPPORT CUP No. 938 - Solid brass. Each No. 938N - Nickel plated. Each GRAND RAIL PROP NUTS Slotted grand rail prop nuts for replacement. Solid Brass. No. 925 -
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More informationPARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
More informationECOLAWN APPLICATOR PARTS LIST. Model ECO-100. Rev
ECOLAWN APPLICATOR PARTS LIST Rev. 04-09- -- Sub-Assemblies Diagram 9 0 5 5 8 7 4 6 4 A-000 MAIN FRAME A-000 STEERING COLUMN ASSEMBLY A-000 MAIN DRIVE SHAFT ASSEMBLY 4 A-0004 DIFFERENTIAL ASSEMBLY 5 A-0005
More informationMETALPLAST-SOPRANA BRUINO TO VIA VOLVERA
1 4 HINGES >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com VERSION WITH OVERTURNED PART HINGES WELDABLE
More informationRestraint Fittings. 2.4 Restraint Fittings. } Tiedown Single Stud Fitting. Tiedown Single Stud. Tiedown Single Stud allsafe
24 Restraint Fittings Different materials and surface qualities make them custom-fit } Tiedown Single Stud Fitting Tiedown Single Stud Tiedown single stud Ultimate load: see table, with heavy-duty track
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More informationSLIDING DOORS DIRECT ROLLER
SLIDING DOORS Single door fixed to wall NFK s Direct Sliding Door system, for installation to a solid wall. Height adjustable track supports can be quickly mounted to a wall allowing the glass to pass
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationsalto safe 4028 A12 Turn-tilt windows
A12 Turn-tilt windows salto safe 4028 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. 32 9 388 88 81 - F. 32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com salto safe 4028 Contents 1. General
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationwww.hafeleindia.com www.hafeleindia.com INTRODUCTION Intuitive furniture is the need of the hour. In times like these where every extra square meter is considered as good as gold, installing versatile
More informationBENEFITS HAND-OPERATED BAILER BORING EQUIPMENT P SA Hand operated bailer boring set
In less-cohesive soils, below the groundwater level, a bailer and synthetic casing tubes can be used. For ergonomic reasons a casing tube platform is used. For drilling into the ground and taking soil
More informationWeatherfold 4s 50 & Guide to Quantities For Top Hung Exterior Folding Systems. Non Mortice Timber & Aluminium
- Guide to Quantities For Top Hung Exterior Folding Systems. Non Mortice Timber & Aluminium This Guide to Quantities is only applicable to Data Sheets E1 and E130. Specification for Individual Panels Track
More information32 Gallon Perforated Square Receptacle
32 Gallon Perforated Square Receptacle 992-031 24 5/" 24 5/" 39 1/2" 30 1/2" ITEM NO. PART NUMBER DESCRIPTION QTY. 1 653-006 Receptacle Base 1 2 653-045 32 Gallon Perforated Side 4 3 653-011 Arch Lid 1
More informationMETALPLAST-SOPRANA BRUINO TO VIA VOLVERA 88/4 TELEPHONE FAX
4 HINGES >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 VERSION WITH OVERTURNED PART ADJUSTABLE HINGE
More informationCalf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
More informationMAXIMA TRADITIONAL JUST ASK FOR THE WOOD GATE HARDWARE QUICK & EASY TO INSTALL AVOID TYPICAL INSTALLATION PROBLEMS END USER SATISFACTION
ORNAMENTAL GATE HARDWARE JUST ASK FOR THE MAXIMA TRADITIONAL QUICK & EASY TO INSTALL Patent No. 4,871,203 No. 4,690,440 j j j j j PRE-ASSEMBLED You do not have to put it together EASIEST INSTALLATION Two
More informationO-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
More informationBrackets and Tenons. Product Specifications. PB Series
Brackets and Tenons Product Specifications FINISH Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion,
More informationReview the instruction pages in their entirety to prepare the required tools
Tool Boxes Thank you for choosing Dee Zee to add function and accessorize your vehicle. Dee Zee has been a staple brand in the truck accessory market since 1977 and we hold a reputation of quality manufacturing
More informationset of safety brace steel cable draw-up gate kpl
0324101 7108020 8208100 Order-nr. Description Number 0324101 safety brace steel cable draw-up gate 2 7108020 hexagon-head tap bolt M8x20 galv. 2 8208100 hexagon nut M8 galv. 2 set of safety brace steel
More information6.1. PUSH-PULL-PROPS and accessories
6 6.1. PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY 6 GENERAL INFORMATION PUSH-PULL-PROPS AND ACCESSORIES INDEX General information....................... 3 Push-pull-props Type R.....................
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More information8" PIVOT. Model 8000 Pivot - Prior to Feb 2002
" PIVOT Model 000 Pivot - Prior to Feb 00 " Pivot Table of Contents Description Rev. # Pg. # Overall Assembled View... 0-0... Legs & Braces... 0-0... Ladder... 0-0... Collector Ring "J" Tube... 0-0...
More informationAPPENDIX FENCE GENERAL NOTES
APPENDIX FENCE GENERAL NOTES 1. Fabric: 9 gage, 2" mesh, knuckle top and bottom, placed on the outside of posts, single fabric width for the entire height. 2. All fencing to be standard galvanized finish.
More informationMITCHELL WREATH RINGS NO-HAMMER ASSEMBLY INSTRUCTIONS
MITCHELL WREATH RINGS NO-HAMMER ASSEMBLY INSTRUCTIONS METAL STAND WITH WOOD STAND WITH PAGE 2 OF 10 MASTER PARTS LIST HEAD ASSEMBLY LINKAGE ASSEMBLY HOOK LEVER ASSEMBLY FOOT PEDAL ASSEMBLY ALL FASTENERS
More informationKwik-Lock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Installation Instructions Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationK15.13 FACE FIXED DOOR HINGES K15 DOORS
K15 DOORS K15.13 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General... K15.13.03 2. 2-part hinge...
More informationSIG-030-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY I LUMINAIRE ARM 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) POLE CAP
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
More informationDOOR KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 6. Verify accessory fitment at Polaris.com.
DOOR KIT P/N 2882528 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation
More informationFURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery
More informationVisual Guide. Balloons match the sections. - iii. Components & Parts Catalogue
Balloons match the sections. Visual Guide - iii - iv - Components & Parts Catalogue Table of contents 1. Frame assembly... 1 1.1. Bumper Step Furnishings (Aluminium Checker)... 3 1.2. Sliding Cover assembly...
More information2.4 Restraint Fittings. Restraint Fittings
24 Restraint Fittings Restraint Fittings 44 Best in class allsafe JUNGFALK provides only high quality fittings Made in Germany Integrated buckle with fitting Standard single stud fitting Our in-house production
More informationPowerLock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 PowerLock Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com Indianapolis,
More informationATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.
F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC
More informationMORTISE LOCKS RESIDENTIAL SERIES
MORTISE WITH TRIM MORTISE WITH sectional TRIM AVAILABLE FINISHES C15 SATIN NICKEL C26 POLISHED CHROME C26D SATIN CHROME FEATURES cul listed for use on 3-hour Fire Door (Single or Double Doors) Conforms
More informationModel PLM5113N PETROL LAWN MOWER
Strana 1 / 2 Strana 2 / 2 Strana 1 / 4 001 671006065 "BLADE TIGHTEN BOLT 3/8""24" 1 002 671010730 LID SHAPE WASHER 1 003 DA00000973 BLADE 510MM 1 004 671015252 BLADE SUPPORT 1 005 DA00000535 FLAT KEY 1
More informationK15.12 ROLLENBAND K15 DOORS
K15 DOORS 01.04.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics....03 2. Application range....03
More informationIN20733 Rev. B 1/06/2016
14,000 LBS. (6350 Kg.) Bolt-on Alignment Kit Installation Instructions S100129, S100130, S100131 S100132, S100133, S100134 S100135, S100136, S100137, S100173, S100174 Model Max Wheel Base Max 2 Wheel Alignment
More informationArctic Standard Duty Steel Blade 84", 90" (Blade, Quadrant, A-frame)...2. Arctic Standard Steel Blade, Quadrant & A-frame Installation...
Table of Contents for Standard Steel Arctic Standard Duty Steel Blade 84", 90" (Blade, Quadrant, A-frame)...2 Arctic Standard Steel Blade, Quadrant & A-frame Installation...6 Important note: Lift frames
More informationPowerLock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 FOR Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com Indianapolis,
More information>> ACCESSORIES 5 2 METALPLAST-SOPRANA
CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE 127013
More informationINDEX > CH.5 HANGING SUPPORTS TENTI SHELF SUPPORTS TENTI TENTI TENTI - 4C... TENTI TENTI TENTI TENTI
> C.5 ANGING SUPPORTS INDEX SELF SUPPORTS 1-3... 305 2-4... 306 3-4C... 307 4-5... 308 5-7... 309 6-8... 310 7-9... 311 305 > C.5 ANGING SUPPORTS Maximum loads for shelf supports The test levels that shelf
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationSection MULTIPOINT LOCKS
1 Section MULTIPOINT LOCKS 1 MULTIPOINT LOCKS / G000 Multipoint Index Introduction How to Specify Introduction Multipoint Locks Features & Functions Photo Gallery Range Table High Security The new high
More informationInterior Equipment, Shop Fittings
Interior Equipment, Häfele, the brand you can trust. The innovator of functionality. Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Eilox SHOPTEC Shopfitting
More informationMaterial Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
More informationCabinet Rim lock, Push Button type, - 25 mm backset Page 2-3
Izerwaren Order numbers 25.191. Cabinet Rim lock, Push Button type, - 25 mm backset Page 2-3 Cabinet Rim lock, backset 25 mm - 1 Minimum door thickness 19 mm ~3/4 Strike plate not included with lock Both
More informationMounting Instructions Item No.: xxx
Mounting Instructions Item No.: 271.92.xxx Wall-Beds 1 General Notes For vertical folding beds Successful and safe installation of Bed-Lift and construction of casework requires a professional skill level
More informationModular transfer system. PDF- Catalog Modular Transfer System
Modular transfer system PDF- Catalog Modular Transfer System 1 Modular Transfer System TLM 1000 156, route de Lyon 38300 DOMARIN FRANCE Phone (33) 4 37 03 33 55 Fax (33) 4 37 03 33 59 September 2001 edition
More informationFurniture Fittings Concealed Hinges
Blum Clip Top Blumotion, opening angle 110 Material: Steel cup and arm : Screw fixing Installation: Door onto carcase without tools (Clip system) Adjustment: 3 dimensional (with appropriate mounting plate)
More informationSingle 180 Double 180 Triple. 180 Quad
Product Specifications FINISH Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation
More informationInterior Equipment/Shop Fittings
Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories
More informationE11.15 HANDLES AND LOCKCASES E11 BOTTOM HUNG OPEN IN WINDOWS
E11 BOTTOM HUNG OPEN IN WINDOWS HANDLES AND LOCKCASES 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Handles
More informationEnclosures, guards and partitions 6. Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security
Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security Application example system solutions for enclosures and guards Components for building enclosures and guards 1 2 3 4 5 7 194
More informationFor Euro grooves and NC International profiles
RIBANTA For Euro grooves and NC International profiles - All accessories are frontally applied - Connection rods are modular and provided already pre-cut to standard sizes - All parts are pre-assembled
More informationConnectors slot fasteners
Description Slot nut () The slot nut is directly adapted to the T-slot of the structural system. On the support beam, the slot nut may be entered into the T-slot from the beam side, thus making it very
More informationSPECIAL EXTRUSIONS AND ACCESSORIES
PROFILE SYSTEM SPECIAL EXTRUSIONS s no i s u r t xe l a i c eps Import Belgium & Luxembourg Profilex s.a. 4A, Z.I. In den Allern L-9911 Troisvierges Tel: 00352/99 89 06 Fax: 00352/26 95 73 73 www.profilex-systems.com
More informationParts Catalog Collector 34 Model Battery
Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-20)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering B (97104855)... 10 Travel drive, part 1
More informationTechnical Training USG Saw Chain Grinder
Technical Training USG Saw Chain Grinder 1 USG HOS The STIHL USG Universal Sharpener will sharpen all types of saw chain. This is by far the most versatile and accurate machine of its type on the market.
More informationTROLLA LEAVY 97 CM Lawn sweeper
TROLLA LEAVY 97 CM Lawn sweeper Artikel nr.: 1008 EN Operating manual 014/1 Dear Customer, Congratulations on your new Trolla product. We hope you will enjoy it. Checkout with your new Trolla product may
More informationC11.16 CHRONO ACCESSORIES C11 SIDE HUNG WINDOWS
C11 SIDE HUNG WINDOWS CHRONO ACCESSORIES 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Window stays....03
More informationSwivel Hoist Ring Page 142
Swivel Hoist Ring Page 142 Hoist Rings Color coded to distinguish between UNC (Red) and Metric (Silver) thread types HR-125 M HR-125 Available in UNC and Metric thread sizes. UNC threads available in sizes
More informationGota cassette. Version 1.10 Sun Protection AVZ 3G.1
Version 1.10 Sun Protection AVZ G.1 G.2 Sun Protection AVZ Version 1.10 Part number Description Paint finish Length in m 1 4211 772-090 Alu wall bracket 140 mm Mill finish 4211 772-008 Idem RAL 705 light
More informationV Installation instructions, accessories. Auxiliary seat. Volvo Car Corporation Gothenburg, Sweden V70 (00-08) 2002
Installation instructions, accessories Instruction No 8624018 Version 1.3 Part. No. 30749269, 30749270, 30749271, 30749272, 30749273, 30749274 Auxiliary seat M8901699 Volvo Car Corporation Auxiliary seat-
More informationCOMPACT 24 8 SHAFTS
COMPACT 24 8 SHAFTS 1022-0001 1573 Savoie C. P. 4 Plessisville, Qc. Canada G6L 2Y6 TEL: 819-362-7207 FAX: 819-362-2045 www.leclerclooms.com nfo@leclerclooms.com On receiving the loom, unpack and lay out
More information5. Outdoor equipment. Barrier posts. Stainless steel
5. Outdoor equipment Urban Equipment Building Equipment 5.1 Bicycle stands / lean-on hoops 252-262 5.2 Laundry drying stands 263 5.4 Litter bins 264-265 5.5 Planters 266 Aufpreis: 40,00 Euro 251 Bicycle
More informationSIG-032-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY III LUMINAIRE ARM (SEE CONTRACT) 6'-0", 8'-0", 10'-0" NOMINAL SPREAD
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
More informationInstallation Instructions. Oakmont Folding Doors
Before You Start For quick and easy installation of your Oakmont folding door, read these instructions thoroughly. A few minutes of prior planning will make the job easier and ensure years of trouble-free
More informationFeatures of TOOLFAST Clamping Devices and Clamping Elements
PART I CLAMPING DEVICES & CLAMPING ELEMENTS INTRODUCTION In the following pages of this part of catalogue, different types & sizes of clamping devices and clamping elements manufactured by us are illustrated.
More informationCut the center and pre-drill the Hinge Plate. Do not drill the Rudder Hinge hole at this time.
7F4-1 Upper Rudder Hinge Plate Layout the cut for the Upper Hinge Plate. Measure and mark the center for the Rudder Hinge. The center hinge hole is 75mm from the back edge of 7F4-1. Cut the center and
More information#2010 #1795. Frame Rack Dyna Mo Clamps Two pair of jaws with 12 draw bar. Grip surface 9-¼ wide. #1929 #1910
Mity Bite Clamp Use for one or two-directional pulling. Good for confined areas. Grip 2 wide. Multi Angle Clamp Pulls from any direction with a 180 arc. Makes two-way pulling faster and easier. Bolt stoppers
More informationINSTALLATION INSTRUCTIONS PART#:17GT23MSS\17GT23MA MODULAR GRILL GUARD FOR CHEVY SILVERADO 1/2 TON 99-02
INSTALLATION INSTRUCTIONS PART#:17GT23MSS\17GT23MA MODULAR GRILL GUARD FOR CHEVY SILVERADO 1/2 TON 99-02 1 guard, center section 1 brush guard, left side 1 brush guard, right side 1 wire guard insert,
More informationProduct overview. Fasteners. new article extended article. Fasteners. Fasteners adjustable. with spring clip K0043. heavy-duty version K0052.
49 430 Product overview with spring clip K0043 heavy-duty version K005 with a pulling latch K0044 Page 43 Page 441 with a pulling latch K0045 Page 433 screw-on holes visible K0046 Page 434 screw-on holes
More informationSLIDING GATES BRUNDLE
SLIDING GATES BRUNDLE 32 BRUNDLE TOOTHED GATE RACK & ACCESSORIES TO BE WELDED TO GATE. GALVANISED OR SELF COLOUR IN ROLLED STEEL FOR GATES UP TO 1800KG Rack 22 x 22 H Art L H T L T Self Colour Self Colour
More information>> ACCESSORIES 5 2 METALPLAST-SOPRANA
1 CABIN 7 >> ACCESSORIES METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com 2 GRAB HANDLES GRAB HANDLE CODE
More informationBarrier posts of steel tube Ø 76 mm, Ø 89 mm, 70 x 70 mm
of steel tube Ø 76 mm, Ø 89 mm, 70 x 70 mm Steel tube Ø 76, Ø 89, 70 x 70 mm with welded steel cap approx. 900 mm above ground, total length 1400 mm hot-dip galvanized and yellow coated with black stripes
More informationINSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT
INSTALLATION INSTRUCTION RRU Double Light Pole Mount for installation of two RRU units on mast, towers or other vertical structures. CUE DEE YOUR INNOVATIVE PARTNER 1 CONTENTS 1. PRODUCT COVERED IN THIS
More information3. Barrier elements. Barrier posts. Stainles steel
3. Urban Equipment Building Equipment Stainles steel e 3.1 Tubular hoops 216-223 3.2 Access barriers 224-227 3.3 Height restriction barriers 228-231 3.4 Protective railing 232-237 3.5 City fence 238-240
More informationParts List for Type 1
1 422190430001 FENCE BODY 1 2 901010600677 CAP SCREW 2 3 904010331451 WASHER 3 4 901010600605 CAP SCREW 2 5 904010101604S STEEL WASHER 2 6 422040105002 REAR SLIDE BLOCK 1 7 905040714459 STEEL PIN 1 8 928010414118
More informationFastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS.
Fastener Categories Wood Screws Machine Screws Thread Cutting Machine Screws Screws with a smooth shank and tapered point for use in wood. Abbreviated WS. Screws with threads for use with a nut or tapped
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationBY ALIEN TECHNOLOGIES CORP
BY ALIEN TECHNOLOGIES CORP Assembly Instructions TopLift Pros YOU MAY ALSO REVIEW OUR ASSEMBLY VIDEO, PLAY AND PAUSE AT YOUR CONVENIENCE. JUST VISIT US AT WWW.TOPLIFTPROS.COM AND GO TO Customer Support
More informationSikurExit: panic function multipoint locks for 1- and 2-leaf aluminum and steel doors
SikurExit: panic function multipoint locks for 1- and 2-leaf aluminum and steel doors SikurExit: panic function multipoint locks for 1- and 2-leaf aluminum and steel doors OPERATION 3 point locking mechanism
More informationOutdoor equipment. Barrier posts. Stainless steel. Barrier elements. Barrier poles. Outdoor equipment - pages
- pages 215-228 Bicycle stands / lean-on hoops Laundry drying stands Tree guards Litter bins Planters 215 Bicycle rack Sturdy and space-saving due to alternating high and low racks. Racks can be bolted
More information