Michaels.com Project Submission Form

Transcription

1

2

3

4

5 Michaels.com Project Submission Form Instructions: Please download this form for each project to be placed on the Michaels web site. Please do not use formatting of any type in this document, including but not limited to bold, italics, indentations, etc. Do not type in all caps or use quotation marks; limit the use of exclamation points. Please include all trademarks, registration marks, copyright statements, etc. Photography: The preferred format for jpeg photos is 300 dpi. Do not embed any photography in this form. Each form should be accompanied by separate images, all labeled with the same title as the word document. Supporting step by step detail images should be included with the corresponded step noted. Also, please include jpeg of vendor logo if submitting a project to the web site for first time. Return Completed Forms & Images To: Kids: Other Categories: PROJECT TITLE: Shiver Me Timbers Pirates Chest DESIGNED BY: Tammie Wilson SKILL LEVEL: (Adult 1-5 or Kids being the easiest, 5 being of highest difficulty) Adult 4 TIME TO COMPLETE: 4 hours not including dry time ROMANCE COPY: Oy Matey! The perfect place to securely store your pirate booty this chest is protected by double edges swords and the skull and crossbone warning! PROJECT TIP: For perfect lettering thin paint with water to an inky consistency, approximately equal parts paint and water

6 SEARCH KEYWORDS: (Please provide words which the consumer may use to search for this project. Words in this section should be in lowercase type and separated with one space between each word only.) Delta Ceramcoat Pirate Chest Storage VENDOR NAME: Delta Creative INSTRUCTIONS: 1. Sand trunk to smooth any rough edges or areas. 2. Mix equal parts Gel Stain Medium and Autumn Brown paint. Using the 1 brush apply stain to the entire trunk, inside and out. Use a paper towel to wipe back stain until desired effect is achieved. 3. Mask off a 1.25 border around edges using the tape, making sure to burnish the edges to prevent the paint from seeping under the edges. Paint with two smooth even coats of Black. 4. Trace pattern and transfer onto trunk using the graphite paper and a pencil. 5. Basecoat as follows: skull and crossbones- White, scarf- Moroccan Red, eye patch, inside eye socket and upper portion of sword handles- Black, swords- Metallic Silver and lower portion of sword handles- Metallic 14K Gold. 6. Shade both sides of the skull, under the scarf, the ends of the bones, under the skull where the bones cross, on the lower portion of the gold sword handle, on the lower portion of the swords, where the swords cross around the both images and along all the borders with Black. 7. Shade the scarf with Moroccan Red + Black (1:1). Highlight the top edge of the swords with White. 8. Add dots of Moroccan Red on the handle of the sword using the brush handle. Let dry and line one side with Metallic Silver to highlight and the opposite side with Black to shade. Add light stripes of Metallic Silver on the upper handle. 9. Lettering is done with thinned Metallic Silver using a liner brush. Detail on lettering is done with thinned Metallic 14K Gold. 10. Add detail shade lines to skull and cross bones using a black permanent marker. 11. Finish with 2-3 coats of Satin Varnish. MATERIALS CHECKLIST:

7 Delta Ceramcoat Acrylic Paint Autumn Brown Black White Moroccan Red Metallic 14K Gold Metallic Silver Gel Stain Medium Trunk Medium Artist brushes- 1 Flat/Wash #10 Shader #8 Filbert 10/0 liner Black Permanent Marker Palette paper Paper towels Tracing paper Transfer paper Pencil Tape