Cooke Precast Concrete

Size: px

Start display at page:

Download "Cooke Precast Concrete"

Marion Mills
5 years ago
Views:

1 Cooke Precast Concrete

History Cooke Precast Concrete Pty. Ltd.

side entry pits, inspection openings and cable pits. Cooke Precast Concrete can provide a large range of access cover products in addition to septic tanks, car park and domestic products.

With the opening of our G.R.C. (Glass Reinforced Concrete) division in July 2000 our flexibility to supply all types of product is now complete.

shops. We are proud manufacturers of a modular Pumping Station System (sizes up to 3200mm internal diameter) which are custom made and supplied throughout Australia and shipped to New Zealand.

Drainage & Electrical G.R.C. pit and linear drainage products are lightweight yet with the strength stronger than concrete.

Along with the linear drainage channel system (Rapid channel) being available ex stock with a choice of covers or gratings we can supply a lightweight alternative to complement our catalogue.

2 History Cooke Precast Concrete Pty. Ltd. commenced business in September 1996, with a staff combining together bringing many decades of knowledge and experience within the precast concrete, transport and specialists in the drainage industries. Operations The Company manufactures from a factory at Edinburgh North, South Australia, with an extensive range of slip moulds for precast production in the drainage field, numerous moulds for sumps, side entry pits, inspection openings and cable pits. Cooke Precast Concrete can provide a large range of access cover products in addition to septic tanks, car park and domestic products. With our own large concrete batching facility we are able to produce consistent mixes as well as the special design batches like calcareous aggregate, fondag, coloured and high strength concrete. With the opening of our G.R.C. (Glass Reinforced Concrete) division in July 2000 our flexibility to supply all types of product is now complete. Commercial Cooke Precast are suppliers to Local Government, State and Federal Authorities and being a Quality Endorsed Company to AS/NZS ISO 9001:2008 we can comfortably perform to the required standards. Industrial With our vast range we supply to Civil / Drainage and Electrical Contractors, Plumbers and Builders for projects ranging from housing development to new airports, or motels to take-away shops. We are proud manufacturers of a modular Pumping Station System (sizes up to 3200mm internal diameter) which are custom made and supplied throughout Australia and shipped to New Zealand. Domestic Factory flexibility enables us to produce a full range of septic tank and ancillary products, also paving slabs, a range of walling sleepers and lawn edges for parks and gardens. G.R.C. Drainage & Electrical G.R.C. pit and linear drainage products are lightweight yet with the strength stronger than concrete. Cooke Precast produces a full range of easy to handle pits suited for both the electrical and drainage industry. Along with the linear drainage channel system (Rapid channel) being available ex stock with a choice of covers or gratings we can supply a lightweight alternative to complement our catalogue. Agencies Cooke Precast are proud to be the sole South Australian agent for HAVESTOCK cast-iron access covers and grates. Havestock are the largest Australian supplier of Quality Assured cast-iron drainage products made to AS Cooke Precast hold a large quantity of Havestock access covers and gratings at our Elizabeth plant ready for immediate delivery. Lifting Clutches Sizes used 1.3 Tonne 2.5 Tonne 5.00 Tonne Tonne All CPC products requiring lifting points are manufactured with spherical head anchors ELECTRICAL PITS: ELECTRICAL Electrical Pits can be manufactured from a variety of materials for a wide range of applications. They can be used for the underground connection of electrical cables, communication connections or fibre optics. Plastic for its light weight is an ideal choice. For its versitility and strength G.R.C. and for its load capacity and flexibility of manufacture Precast Concrete would be a great choice. why use PRECAST CONCRETE? Quality Design Intensely vibrated precast concrete structures made in a factory controlled environment are generally superior compared to that attained under general site conditions. Concrete cover to steel reinforced to suit specification is achieved to a higher standard in a precast mould compared to in situ offerings. Each precast pit is individually manufactured to the client s requirements. Penetrations and exact heights are incorporated directly from engineering plans to create a custom built pit where needed. A full range of access covers or gratings are offered to finish the project as specified. Timing Efficiency Precast product can be delivered to site when site conditions and / or the contractor are ready. Being already cured, therefore finished product is capable of immediate use and acceptance of design load. Quick installation will result in reduced time spent on the job for both plant and labour. Excavations are open for less time, while immediate back-fill and clean up can be carried out as one continuous operation thus eliminating the on-going and costly return operations. Safety Open excavations are dangerous and costly. With short installation times, personnel in deep excavations along with barricading and safety equipment / supervision are reduced to a minimum. Precast is an essential product for pedestrian access areas where same day job completion can be achieved. Economical Precast pits are more economical when compared to in situ. With a stricter control of raw material quantities, labour and the ability to reuse factory mouldings, this makes the precast product a far cheaper item. Summary With a vast product range and our truck crane delivery service we believe that our commitment to customer satisfaction is unsurpassed. Whether it be standard or One Off products Cooke Precast can produce to any requirement. With our on going product development we are able to complete any project required on schedule. what is GLASS REINFORCED CONCRETE? Glass Reinforced Concrete ( GRC ) is a generic name for a composite product constructed from a matrix of cement, fine aggregate and glass fibre. Methods of manufacture are the traditional vibration casting method similar to the precast concrete industry or the more common spraying through a special glass / slurry chopper gun. GRC combines the high strength of fibre glass with the rigidity of cement mortar to give a tough rigid material that has a strength to weight ratio superior to most other commonly used building products. AS/NZS ISO 9001:2008 Cert No. QEC

Precast Concrete Electrical Pits Electrical Pit Covers & Frames Available in Light Standard Pit Details Internal Dimensions A B Walls & Base Thickness 300 300 100 450 450

Stainless Steel Bound decorative Cast Iron Cover & Frame 1200 900 150/200 1200 1200 150/200 1500 900 150/200 1500 1200 150/200 1500 1500 150/200 CAST IRON COVER & FRAME

Heavy or Light Duty A Internal B Internal All sizes given are clear opening Standard S.F.U.

80Kn Footpaths and other areas not normally trafficked by trucks 150Kn Pedestrian malls, industrial and other areas subject to slow moving fully laden trucks 210Kn Roads

3 Precast Concrete Electrical Pits Electrical Pit Covers & Frames Available in Light Standard Pit Details Internal Dimensions A B Walls & Base Thickness / / / / A Internal B Internal As specified or Heavy Duty CAST IRON COVER & FRAME Brass or Stainless Steel Bound decorative Cast Iron Cover & Frame / / / / /200 CAST IRON COVER & FRAME Available in Heavy or Light Duty 150mm NOTE: All dimensions in millimetres As specified CONCRETE COVER SLAB For loose fit cast iron Heavy or Light Duty A Internal B Internal All sizes given are clear opening Standard S.F.U. Details 4 Internal Dimensions Base 5 AS 3996 Strength Classification Load Class Test Class Zone Description A B C D 10Kn Pedestrian precincts inaccessible to motor vehicles 80Kn Footpaths and other areas not normally trafficked by trucks 150Kn Pedestrian malls, industrial and other areas subject to slow moving fully laden trucks 210Kn Roads subject to fast moving fully laden trucks and industrial areas trafficked by fork lifts or other vehicles with wheel loads of up to 5T SUMP FINISH UNIT 6mm Galvanised Chequerplate A B Thickness NOTE: All dimensions in millimetres

G.R.C. Electrical Pits & Increments G.R.C. Electrical Pits Glassfibre Reinforced Concrete CHEQUERPLATE LID 6mm Hot Dipped Galvanised Chequerplate G. R. C. COVERS ( LIDS ) PRODUCT NO.

5 CONCRETE LID Stamped Electrical, Communication or Blank Suitable for G.R.C. PIT RISER G.R.C. Increment PIT SPECIFICATIONS PRODUCT NO. SIZE DEPTH WEIGHT kg P 33 300 X 300 400 17.

0 P 99-6 900 X 900 600 85.0 P 99-9 900 X 900 900 130.0 PIT RISERS ( EXTENSIONS ) PRODUCT NO. SIZE DEPTH WEIGHT kg PE 33 300 X 300 300 15.5 PE 44-3 450 X 450 300 18.5 PE 44-6 450 X 450 600 25.

0 NOTE: All dimensions in millimetres. All Sizes Given Are Cl

4 G.R.C. Electrical Pits & Increments G.R.C. Electrical Pits Glassfibre Reinforced Concrete CHEQUERPLATE LID 6mm Hot Dipped Galvanised Chequerplate G. R. C. COVERS ( LIDS ) PRODUCT NO. SIZE LOAD CLASS WEIGHT kg PL X 300 A 7.0 PL X 450 A 17.5 PL X 600 A 29.0 PL X 750 A 35.5 PL X 600 A 36.0 PL 99-2 part 900 X 900 A 51.5 CONCRETE LID Stamped Electrical, Communication or Blank Suitable for G.R.C. PIT RISER G.R.C. Increment PIT SPECIFICATIONS PRODUCT NO. SIZE DEPTH WEIGHT kg P X P X P X P X P X P X P X P X P X P X PIT RISERS ( EXTENSIONS ) PRODUCT NO. SIZE DEPTH WEIGHT kg PE X PE X PE X PE X PE X PE X PE X PE X PE X PE X NOTE: All dimensions in millimetres. All Sizes Given Are Clear Opening. G.R.C. PIT 450 x 450 G.R.C. pit illustrated Pit Installation Section Detail G.R.C. PIT 900 x 600 G.R.C. pit illustrated Electrical, Communication or Fibre Optic connection 8 9 Load Class A B C D AS 3996 Strength Classification Test Class Zone Description 10Kn Pedestrian precincts inaccessible to motor vehicles 80Kn Footpaths and other areas not normally trafficked by trucks 150Kn Pedestrian malls, industrial and other areas subject to slow moving fully laden trucks 210Kn Roads subject to fast moving fully laden trucks and industrial areas trafficked by fork lifts or other vehicles with wheel loads of up to 5T 1 Ground Preparation Excavate the hole to suit the pit, put a bag mix concrete pad fo the pit to 2 Pit Placement Set the pit in place, and connect the appropriate pipe work to the pit. 3 Back Fill Back fill the hole with stabilised crushed rock or concrete depending 4 Protective Edge Note: all pits require a concrete surround at the top edge of the pit sit on, in order to create Note: with a grated pit on the load classifaction. for protection against an even solid base. the grate sits inside the vehicle impact. pit. A solid top cast iron cover sits over the pit.

Plastic Pits & Lids P1 P5 Plastic Pits & Lids P6 P9

CONCRETE LIDS Available for P2, P3, P4, P5, P6 & P8

LID: 615 x 245 NUMBER 3 663 x 243 x 570 LID: 730 x 295

NUMBER 4 584 x 281 x 760 LID: 650 x 350 1020 x 550 x 1130

400 Split pit available 6 7 NUMBER 8 1365 x 545 x 895

Also available in 600 x 600 x 600 450 x 450 x 300

5 Plastic Pits & Lids P1 P5 Plastic Pits & Lids P6 P9 NUMBER x 155 x 350 LID: 470 x 190 CONCRETE COLLAR CONCRETE LIDS Available for P2, P3, P4, P5, P6 & P8 Available in ELECTRIC or COMMS NUMBER x 180 x 514 LID: 615 x 245 NUMBER x 243 x 570 LID: 730 x 295 NUMBER x 550 x 670 LIDS: 2 x 655 x 500 NUMBER 7 NUMBER x 281 x 760 LID: 650 x x 550 x 1130 LIDS: 2 x 500 x 460 NUMBER x 455 x 650 LID: 650 x 400 Split pit available 6 7 NUMBER x 545 x 895 LIDS: 2 x 655 x 500 RISER 450 x 450 x 450 illustrated Also available in 600 x 600 x x 450 x 300 illustrated Also available in 600 x 600 x 300 NUMBER x 545 x 895 LIDS: 3 x 655 x 500

Special Products Series Isolation Transformer (S.I.T.) Pit S.I.T. / CSL Visit our Website www.cookeprecast.

At Cooke Precast we have a steel engineering facility that can manufacture moulds and patterns to meet the

Together with our precast concrete plant and working together with our customers we can offer a complete

A good example of this is the two products shown on this page. Both are sold using G.R.C.

Australia. At Cooke Precast we provide the construction industry with better products by improved design.

Phone: (08) 8209 3093 Fax: (08) 8209 3094 Earth Rod Pit Tr

6 Special Products Series Isolation Transformer (S.I.T.) Pit S.I.T. / CSL Visit our Website at S.I.T. / COL S.I.T. Pit Our G.R.C. Products division has the flexibility to manufacture special or custom products to your requirements. At Cooke Precast we have a steel engineering facility that can manufacture moulds and patterns to meet the exacting tolerances needed for a quality product. Together with our precast concrete plant and working together with our customers we can offer a complete package from a design idea through to a quality endorsed product. A good example of this is the two products shown on this page. Both are sold using G.R.C. and Precast Concrete with Steel or Alloy Covers all of which constructed at our Elizabeth plant in South Australia. At Cooke Precast we provide the construction industry with better products by improved design. COOKE PRECAST CONCRETE 3 Peachey Road Edinburgh North, South Australia 5113 PO Box 130 Elizabeth SA 5112 Phone: (08) Fax: (08) Earth Rod Pit Transformer Support for S.I.T. Pit 10 S.I.T. / TS While Cooke Precast Concrete has taken all reasonable care in preparing this brochure, Cooke Precast Concrete takes no responsibility for loss resulting from relying on its contents. Customers should make their own enquiries as to whether any products described in this brochure are suitable for their intended use. Information in this brochure may change without notice.

Cooke Precast Concrete

Cooke Precast Concrete STORMWATER History Cooke Precast Concrete Pty. Ltd. commenced business in September 1996, with a staff combining together bringing many decades of knowledge and experience within