MECH 192 COMPUTER AIDED DESIGN
|
|
- Gervais Price
- 6 years ago
- Views:
Transcription
1 MECH 192 COMPUTER AIDED DESIGN Asst. Prof. Dr. Onur SARAY Department of Mechanical Engineering Office: T
2 1. INTRODUCTION What is an Engineering Drawing? Engineering drawing is a technical drawing which clearly defines and communicates a design to other interested parties. Other parties may have an interest in: Design collaboration, Manufacturing, Quality control, Marketing, Maintenance Mech 192 Computer Aided Design 2
3 Why do we need to know about Engineering Drawings? To allow our designs to develop from a thought or concept to a sketch on paper. To enable us to communicate Mech 192 Computer Aided Design 3
4 What are aims of this course? To represent our designs on piece of paper To be able to understand principles and rules of engineering drawing. To be able to represent 3D objects/parts/systems in 2D sketches. To be able to use CAD program effectively in 2D module To get the knowledge of 3D modelling of single parts and assemblies To be able to use 3D part design tools effectively. Modellling geometry of engineering systems part by part To be able to mate them into assemblies To be able to use state of the art technology Mech 192 Computer Aided Design 4
5 Suggested Text books: Technical Drawing with Engineering Graphics by Frederick E. Giesecke, Ivan L. Hill, Henry C. Spencer and Alva E. Mitchell Makine resmi, İbrahim Zeki Şen, Nail Özçilingir, Deha Yayınları Teknik resim I-II Kemal Türkdemir, Pamukkale University Mech 192 Computer Aided Design 5
6 Week s 1 Course schedule: Lecture topics Syllabus-Learning objectives Introduction, Basic components of engineering drawing Drawing are, paper layout, lines: properties and meanings Introduction to SolidWorks 2012 GUI, Basic drawing tools of Solidworks Construction of drawing area 2 Geometric construction, projections, dimensions HW#2 3 Sectioning HW#3 2D 4 Drawing of common machine elements: Screws, nuts, ball bearings, gears, etc. HW#4 5 Assembly principles, tolerences HW#5 6 Assemblies-applications HW#6 7 Assemblies-applications HW#7 8 MIDTERM EXAM Dues HW#1 9 Part design with Solidworks HW#8 10 Part design with Solidworks: Automated generation of 2D drawings of 3D parts, annotations HW#9 11 Assembling parts : Mates HW# D Assemblies: Automated generation of 2D drawings of 3D assemblies HW#11 13 Using design library for assemblies HW#12 14 Review of semester, preperation to final exam Mech 192 Computer Aided Design 6
7 Grading policy? Homeworks %30 Midterm %30 Final exam % Mech 192 Computer Aided Design 7
8 2. Principles of technical drawing 2. Drawing sheet(s) A0 A1 A2 A series (mm) 841x x x594 A3* 297x420 A4** A5 A6 A7 210x x x210 74x105 * Midterm and final exams ** Homeworks Orientations: Portrait (A4) 90 Landscape (A3) Mech 192 Computer Aided Design 8
9 2. Principles of technical drawing 2. Layout: All the details necessary to manufacture the part have to be clearly illustrated. 2D views 3D models Paper border Drawing area border Notes to underline critical issues. TITLE BLOCK conveys info. about: Company name Designer,controll er Design date Part defination Revisions Materials Surface finish, tolerences Mech 192 Computer Aided Design 9
10 2. Principles of technical drawing 2. Title blocks according to Turkish standart TS EN ISO 5457 TS EN ISO Mech 192 Computer Aided Design 10
11 2. Principles of technical drawing 2. Lines Lines with different visual properties (type, thickness) are used to illustrate different features of a 2D drawing view. Basic line types: Appearance Features Function Continuous, solid, Thick (0.35mm) Dashed, Medium (0.25mm) Chain, Medium (0.2mm) Continuous, solid Thin (0.2 mm) Part outlines, visible edges Invisible edges Center lines center marks, sectioning lines. Hatching, dimensioning annotations, extension lines Mech 192 Computer Aided Design 11
12 2. Principles of technical drawing 2. Sheet layout to be used in the course Left margin: 15mm Bottom, Top Right margins: 10mm Mech 192 Computer Aided Design 12
13 2. Principles of technical drawing 2. Dimensions of title block to be used in the course Mech 192 Computer Aided Design 13
Fundamentals for building Drawing
Fundamentals for building Drawing What is Drawing Introduction Knowledge of preparing and understanding drawing will prove to be an invaluable aid while performing their jobs effectively, efficiently.
More informationAutoCAD 2D-I. Module 1: Introduction to Drawing Tools. IAT Curriculum Unit PREPARED BY. January 2011
AutoCAD 2D-I Module 1: Introduction to Drawing Tools PREPARED BY IAT Curriculum Unit January 2011 Institute of Applied Technology, 2011 Module 1: Introduction to Drawing Tools Module Objectives After
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS. FUNDAMENTALS OF TECHNICAL DRAWING W/LAB CID 1100 (formerly CID 1104)
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS FUNDAMENTALS OF TECHNICAL DRAWING W/LAB CID 1100 (formerly CID 1104) Class Hours: 3.0 Credit Hours: 3.0 Laboratory Hours: 3.0 Revised: Spring
More informationEG2 - Graphic Expression 2
Coordinating unit: 330 - EPSEM - Manresa School of Engineering Teaching unit: 717 - EGE - Department of Engineering Presentation Academic year: Degree: 2018 BACHELOR'S DEGREE IN AUTOMOTIVE ENGINEERING
More informationSketching in SciTech. What you need to know for graphic communication
Sketching in SciTech What you need to know for graphic communication Sketching in your Logbook Use pencil Take up the WHOLE PAGE Label things 1. Proportion Each part of the sketch is the right size,
More informationEG - Engineering Graphics
Coordinating unit: 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering Teaching unit: 717 - EGE - Department of Engineering Presentation Academic year: Degree: 2018 BACHELOR'S
More informationPARSIPPANY-TROY HILLS TOWNSHIP SCHOOLS A COURSE OUTLINE FOR TEC 631 ENGINEERING CAD II
PARSIPPANY-TROY HILLS TOWNSHIP SCHOOLS A COURSE OUTLINE FOR TEC 631 ENGINEERING CAD II APPROVED BY THE BOARD OF EDUCATION Developed: August 1990 Revised: August 2007 September 2009 October 2012 January
More informationNPTEL
NPTEL Syllabus Machine Drawing - Video course COURSE OUTLINE Technical Graphics is used to communicate the necessary technical information required for manufacture and assembly of machine components. These
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS TECHNICAL ILLUSTRATION W/LAB CID 1110
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS TECHNICAL ILLUSTRATION W/LAB CID 1110 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Date Revised: Spring 02 NOTE: This course is
More informationTEC634 Architectural CAD I (formerly Architectural Drawing I) A Course Outline for Architectural CAD I
Parsippany-Troy Hills School District TEC634 Architectural CAD I (formerly Architectural Drawing I) A Course Outline for Architectural CAD I Developed: June 2004 Revised: October 2012 June 2016 Approved
More informationEG - Engineering Graphics
Coordinating unit: Teaching unit: Academic year: Degree: ECTS credits: 2017 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering 717 - EGE - Department of Engineering Presentation
More informationITT Technical Institute. CD111 Introduction to Design and Drafting Onsite and Online Course SYLLABUS
ITT Technical Institute CD111 Introduction to Design and Drafting Onsite and Online Course SYLLABUS Credit hours: 4 Contact/Instructional hours: 50 (30 Theory Hours, 20 Lab Hours) Prerequisite(s) and/or
More informationKNOWLEDGE & INTERPRETATION
CONTENTS DESK TOP PUBLISHING ALIGNMENT positions of text lines on a page or column e.g. aligned right, aligned left or fully justified. BLEED this is to extend an artwork graphic beyond the trimmed edge
More informationFits and Tolerances. Prof Ahmed Kovacevic
ME 1110 Engineering Practice 1 Engineering Drawing and Design - Lecture 7 Fits and Tolerances Prof Ahmed Kovacevic School of Engineering and Mathematical Sciences Room C130, Phone: 8780, E-Mail: a.kovacevic@city.ac.uk
More informationDrawing Section Views
Drawing Section Views What is a Section View? A section view is a view used on a drawing to show an area or hidden part of an object by cutting away or removing some of that object. The cut line is called
More informationITT Technical Institute. DT1110 Introduction to Drafting and Design Technology Onsite and Online Course SYLLABUS
ITT Technical Institute DT1110 Introduction to Drafting and Design Technology Onsite and Online Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s)
More informationGlass Box Projection. Gives you 6 sides to view of an object. 10/2/14 2
2D Drawings Glass Box Projection Gives you 6 sides to view of an object. 10/2/14 2 We can simplify this for some objects to 3 views Glass Box Approach Glass Box Approach Glass Box Approach Glass Box Approach
More informationINTRODUCTION to CAD ACAD BASICS. 2.1 Starting with ACAD. 2.2 Layout and sketching. 2.3 Drawing environment. 2.4 Elements of drawing
INTRODUCTION to CAD ACAD BASICS 2.1 Starting with ACAD 2.2 Layout and sketching 2.3 Drawing environment 2.4 Elements of drawing 2.4.1 Draw commands 2.5 3D functions 2.6 Starting the drawing 2.6.1 Drawing
More information405) Prerequisit. cies. ncluding size. 3. Create a set of. c5-3,c6-3,c7-33 ,C7-3 SCANS:C5-3, interviews. research, the.
Technical Drafting (DFTG-14 405) Credit: 4 semester credit hours (3 hours lecture, 4 hours lab) Prerequisit te/co-requisite: None Course Description Introduction to the principles of drafting to include
More informationDFTG Blueprint Reading and Sketching
Course Syllabus DFTG 1325 - Blueprint Reading and Sketching Catalog Description: An introduction to reading and interpreting working drawings for fabrication processes and associated trades. Use of sketching
More informationTechnical English -I 4 th week ENGINEERING DRAWING
Technical English -I 4 th week ENGINEERING DRAWING What is engineering drawing? It is the art of representation of geometrical objects on a drawing sheet. An engineering drawing is used to fully and clearly
More informationESSEX COUNTY COLLEGE Engineering Technologies and Computer Sciences Division ENR 103 Engineering Graphics and Introduction to CAD Course Outline
ESSEX COUNTY COLLEGE Engineering Technologies and Computer Sciences Division ENR 103 Engineering Graphics and Introduction to CAD Course Outline Course Number & Name: ENR 103 Engineering Graphics and Introduction
More informationCOURSE OUTLINE. Page : 1 of 6. Revision Date of issue Last Amendment Edition. 1 Hour lecture 6 Hour studio. Lecturers Room No. Phone No.
Page 1 of 6 18 th Febuary 2009 18 th Febuary 2009 PRE-REQUISITE EQUIVALENCE - LECTURE HOURS 1 Hour lecture 6 Hour studio Lecturers E-Mail Room No. Phone No. Badri Abd Ghani agbadri@fkm.utm.my C23-231 Razali
More informationDrafting and Design 1A
Syllabus Drafting and Design 1A Overview This one-semester course is intended as a practical, hands-on guide to help you understand the various techniques, standards, and tools used in drafting and design.
More informationSan José State University Aerospace Engineering AE20 Computer-Aided Design for Aerospace Engineers, Fa
San José State University Aerospace Engineering AE20 Computer-Aided Design for Aerospace Engineers, Fa11 2017 Instructor: Office Location: Robert Benzio E407 Telephone: (408) 203-0457 Email: Office Hours:
More informationChapter 1 Introduction
Chapter 1 Introduction Contents Engineering drawing Drawing standards Drawing sheet Scale Lettering Line types Engineering Drawing Contents Engineering Drawing Effectiveness of Graphic Language 1. Try
More informationDFTG 1305 UNIT 1. Semester: Spring 2016 Class #: Term: SS Instructor: Mays ALSabbagh
DFTG 1305 UNIT 1 Semester: Spring 2016 Class #: 94412 Term: SS Instructor: Mays ALSabbagh Technical Drafting Unit One: Introduction to Drafting Chapter 1 : The World Wide Graphic language for Design Lecture
More informationSOLIDWORKS 2015 and Engineering Graphics
SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More information1 of 6. IT 1303 ENGINEERING DRAWING Fall Instructor. Phone:
IT 1303 ENGINEERING DRAWING Fall 2017 Instructor Mr. Scott Wassermann Office: IT 101 Phone: 837-8137 email: jwassermann@sulross.edu Office Hours: by appointment Time and Location Class: TR 12:30-3:15 pm
More informationGuide To British Standards
Guide To British Standards Higher Graphic Communication C O N T E N T S page TITLE BLOCK 2 DRAWING SCALES 2 LINE TYPES 3 ORTHOGRAPHIC PROJECTION 4 SECTIONAL VIEWS 4 SCREW THREADS & COMPONENTS 7 INTERUPTTED
More informationME 111: Engineering Drawing
ME 111: Engineering Drawing Lecture # 01 Introduction For more detail, visit http://shilloi.iitg.ernet.in/~psr/ Indian Institute of Technology Guwahati Guwahati 781039 1 Syllabus 1. Importance of engineering
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS MICROSTATION W/LAB CID 1200
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS MICROSTATION W/LAB CID 1200 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Date Revised: Spring 99 NOTE: This course is not designed
More informationDepartment of Drafting & Design Engineering Technology. Syllabus
DFTG-2302 Machine Drafting 1 Houston Community College DFTG-2302 Mechanical Drafting Semester Credit Hours (SCH): 3 Continuing Education Units (CEU): 9.6 Weekly class meeting: 4 hrs Tuesda: 6:00 to 10:00
More informationand Engineering Graphics
SOLIDWORKS 2018 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationMechanical Drawing. Unit 2 Study Guide for Chapters 6-10
Mechanical Drawing Unit 2 Study Guide for Chapters 6-10 Chapter 6 Multiview Drawing Section 6.1 Understanding Orthographic Projection A. Technical Drawing: How can a technical drawing give more accurate
More informationESSEX COUNTY COLLEGE Engineering Technologies & Computer Sciences Division ENR 106 Intermediate Computer-Aided Design Course Outline
ESSEX COUNTY COLLEGE Engineering Technologies & Computer Sciences Division ENR 106 Intermediate Computer-Aided Design Course Outline Course Number & Name: ENR 106 Intermediate Computer-Aided Design Credit
More informationAssembly Receiver/Hitch/Ball/Pin to use for CAD LAB 5A and 5B:
MECH 130 CAD LAB 5 SPRING 2017 due Friday, April 21, 2016 at 4:30 PM All of LAB 5 s hardcopies will be working drawing layouts. Do not print out from the part file. We will be using the ME130DRAW drawing
More informationSketching & Auto CAD (Computer Aided Design) - Mechanical Design
Western Technical College 10606113 Sketching & Auto CAD (Computer Aided Design) - Mechanical Design Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits
More informationEngineering Innovation Center Fabrication Shop Basic CAD Training
Engineering Innovation Center Fabrication Shop Basic CAD Training Introduction The Engineering Innovation Center Fabrication Shop was established for support of undergraduate student course work. Every
More informationEngineering Drawing Office Practice; Graphical Engineering Communication Engineering Draughting Skills; Introduction to CAD/CAM or similar Unit
Higher National Unit Specification General information for centres Unit title: Engineering Drawing Unit code: DR1W 34 Unit purpose: This Unit is designed to enable candidates to gain knowledge of current
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED MECHANICAL DRAWING CID 1220
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ADVANCED MECHANICAL DRAWING CID 1220 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Date Revised: Fall 00 NOTE: This course is not
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS TECHNICAL ILLUSTRATION W/LAB CID 1110
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS TECHNICAL ILLUSTRATION W/LAB CID 1110 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Revised: Fall 05 Catalog Course Description:
More informationDesign and Communication Graphics
Design and Communication Graphics Scheme of Work 2014-2015 Ballyhaunis Community School Mission statement The DCG department aspires to provide a safe, stimulating environment where all students can develop
More informationDESIGN DRAFTING GRADES 9 TO 12 LEARNING RESOURCES
DESIGN DRAFTING GRADES 9 TO 12 LEARNING RESOURCES A Reference for Selecting Learning Resources Manitoba Education Manitoba Education and Advanced Learning Cataloguing in Publication Data Design drafting
More informationBasic Computer Aided Drafting (DFTG 1309) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab) Prerequisite/Co-requisite: DFTG-1305
Basic Computer Aided Drafting (DFTG 1309) Credit: 3 semester credit hours (2 hours lecture, 4 hours lab) Prerequisite/Co-requisite: DFTG-1305 Course Description An introduction to computer aided drafting.
More informationRepresentation of features Geometric tolerances. Prof Ahmed Kovacevic
ME 1110 Engineering Practice 1 Engineering Drawing and Design - Lecture 6 Representation of features Geometric tolerances Prof Ahmed Kovacevic School of Engineering and Mathematical Sciences Room C130,
More informationContinuous thick. Continuous thin. Continuous thin straight with zigzags. Dashed thin line. Chain thin. Chain thin double dash
Types of line used Continuous thick Used for visible outlines and edges. Continuous thin Used for projection, dimensioning, leader lines, hatching and short centre lines. Continuous thin straight with
More informationTest Code: 8294 / Version 1
Pennsylvania Customized Assessment Blueprint Test Code: 8294 / Version 1 Copyright 2014. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment
More informationENGINEERING GRAPHICS. Lecture 1: Introduction to Graphic Communication. Jazmin Ley University of Texas Rio Grande Valley
ENGINEERING GRAPHICS Lecture 1: Introduction to Graphic Communication Jazmin Ley University of Texas Rio Grande Valley Overview Graphics Communication in the Design Process Engineering Design Process:
More informationME-441 COMPUTER SIMULATION AND ANALYSIS
ME-441 COMPUTER SIMULATION AND ANALYSIS IN MECHANICAL ENGINEERING Instructor: Dr. Herli Surjanhata Mechanical Engineering Department Office: 328 MEC Phone: (973) 596-3317 e-mail: surjanhata@adm.njit.edu
More informationMath 210: 1, 2 Calculus III Spring 2008
Math 210: 1, 2 Calculus III Spring 2008 Professor: Pete Goetz CRN: 20128/20130 Office: BSS 358 Office Hours: Tuesday 4-5, Wednesday 1-2, Thursday 3-4, Friday 8-9, and by appointment. Phone: 826-3926 Email:
More informationBasic Technical Drawing Problems By Novak;Henry C. Spencer;John T. Dygdon READ ONLINE
Basic Technical Drawing Problems By Novak;Henry C. Spencer;John T. Dygdon READ ONLINE Technical Drawing, 12/E Alva E. Mitchell, Texas A&M University Henry C. Spencer, Purdue University Ivan L. Hill John
More information1 of 6. IT 1303 ENGINEERING DRAWING Summer Instructor. Phone:
IT 1303 ENGINEERING DRAWING Summer 1 2018 Instructor Mr. Terrence Ross Office: IT 101 Phone: 837-8137 email: tross@sulross.edu Office Hours: by appointment Time and Location Class: MTWRF 9:50-11:25 am
More informationEngineering Working Drawings Basics
Engineering Working Drawings Basics Engineering graphics is an effective way of communicating technical ideas and it is an essential tool in engineering design where most of the design process is graphically
More informationCOURSE OF STUDY UNIT PLANNING GUIDE COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR
COURSE OF STUDY UNIT PLANNING GUIDE FOR: COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: 10 12 PREPARED BY: 5 CREDITS CURT BANICKI 1 FULL YEAR JAMES HAHN MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY
More informationCOURSE TOPICS: The following topics will be covered this semester:
ETME 203 Mechanical Design Graphics Spring 2012 rev. 12-16-2011 LEC / REC 001 W, F 10:00 11:50 EPS 134 LEC / LAB 002 T, Th 4:10 6:00 EPS 129 Instructor: Keith Fisher Office: Roberts Hall 201A Phone: 994-6288
More informationCAD Mechanical Design I
EXAM INFORMATION Items 58 Points 85 Prerequisites NONE Course Length ONE SEMESTER Career Cluster ARCHITECTURE AND CONSTRUCTION MANUFACTURING SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS Performance
More informationChapter 8. Technical Drawings
Chapter 8 Technical Drawing Technical Drawings Multiview drawings Also called three-view drawings Simple objects take three views Front, top, one side Title block Identifies who did the design Gives date,
More informationHigher Graphic Communication. Homework. Knowledge and Interpretation. Name. Page
Higher Graphic Communication Homework Knowledge and Interpretation Name Page Homework 1 Q1. For each of the following lines name each and explain where it would be used on a drawing. A coloured electronic
More informationCAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours
CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer
More informationPELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS ARCHITECTURAL DRAWING W/LAB CID 1210
PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS ARCHITECTURAL DRAWING W/LAB CID 1210 Class Hours: 3.0 Credit Hours: 4.0 Lab Hours: 3.0 Revised: Fall 2010 Catalog Course Description: An introduction
More informationBall Valve Assembly. On completion of the assembly, we will create the exploded view as shown on the right.
Ball Valve Assembly Supplied are the main components of a ball valve. In this exercise you will assemble the valve as shown below Left. (N.B. Socket head cap screws are not supplied these will be created
More informationComputer Aided Drafting and Design
Computer Aided Drafting and Design Degrees: AAS Computer Aided Drafting and Design 60-63 Diploma: Computer Aided Drafting and Design 48-51 Certificates: Computer Assisted Drafter 30-36 Detailer 25-28 Drafter
More informationAdministrative Master Syllabus
Purpose: It is the intention of this to provide a general description of the course, outline the required elements of the course and to lay the foundation for course assessment for the improvement of student
More informationECEN 5817 Resonant and Soft-Switching Techniques in Power Electronics
Resonant and Soft-Switching Techniques in Power Electronics Instructor: Dragan Maksimovic office: ECOT 346 phone: 303-492-4863 maksimov@colorado.edu Prerequisite: ECEN5797 Introduction to Power Electronics
More informationDrafting. Drafting and Design Technician
Drafting and Design Technician Program Description This program is designed to provide students with entry level skills in the fields of mechanical, electrical, civil and architectural drafting and/or
More informationISO INTERNATIONAL STANDARD. Technical product documentation Digital product definition data practices
INTERNATIONAL STANDARD ISO 16792 First edition 2006-12-15 Technical product documentation Digital product definition data practices Documentation technique de produits Données de définition d'un produit
More informationGraphic Communication Prelim
H Date February 05 Duration hours Graphic Communication Prelim Name Number of seat Total marks 70 Attempt ALL questions. Write your answers clearly in the spaces provided in this booklet. All dimensions
More informationRequired Materials For complete material(s) information, refer to
Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE AutoCAD Basics Course Description EN 107. AutoCAD Basics.
More informationContents. Foreword. Using this Guide
Foreword xv Preface xvii Scope Using this Guide xix xix 1 Specifying technical products 1 1.1 What is meant by technical product specification? 1 1.2 Design brief 1 1.3 Function 1 1.4 Specifications 2
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS. CIVIL ENGINEERING DRAWING W/LAB CID 2290 (formerly CID 2195)
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS CIVIL ENGINEERING DRAWING W/LAB CID 2290 (formerly CID 2195) Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Revised: Fall 08 Catalog
More informationPrinciples and Practice:
Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations
More informationPELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ENGINEERING DRAWING W/LAB CID 1105
PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS ENGINEERING DRAWING W/LAB CID 1105 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Revised: Spring 05 Catalog Course Description:
More informationTechnical Drawing With Engineering Graphics Giesecke Pdf
Technical Drawing With Engineering Graphics Giesecke Pdf Read Book Online: Technical Drawing With Engineering Graphics Giesecke Pdf Download or read online ebook technical drawing with engineering graphics
More informationENGINEERING GRAPHICS 1.0 Introduction Engineering Graphics Drawing as an art Artist Graphic design Engineering graphics engineering drawing
ENGINEERING GRAPHICS 1.0 Introduction Engineering is the profession in which the knowledge of mathematics and science gained by study, experience and practice is applied with good judgment to develop a
More informationEngineering Technology (ETEC) 12 Introduction to Engineering Design (IED) Course Syllabus
Engineering Technology (ETEC) 12 Introduction to Engineering Design (IED) Course Syllabus Instructor: Rick Hughes Office Hours Room: Phone: (310 660-3593 Mon-Wed-Thur TA 201 Ext 3624 5:00-6:00 p.m. E-mail
More informationAutoCAD LT of 5
AutoCAD LT 2010 This course explores the latest tools and techniques covering all draw commands and options, editing, dimensioning, hatching, and plotting techniques available with AutoCAD LT 2010. The
More informationEngineering Graphics With Autocad 2014 James Bethune
ENGINEERING GRAPHICS WITH AUTOCAD 2014 JAMES BETHUNE PDF - Are you looking for engineering graphics with autocad 2014 james bethune Books? Now, you will be happy that at this time engineering graphics
More informationDrawing and Detailing with SolidWorks. A Workbook for SolidWorks 2001/2001Plus. by David C. Planchard and Marie P. Planchard
Drawing and Detailing with SolidWorks A Workbook for SolidWorks 2001/2001Plus by David C. Planchard and Marie P. Planchard A Competency Based Approach Referencing the ASME Y14 Engineering Drawing and Related
More informationEngineering Drawing. Engineering Drawing TVET FIRST NATED SERIES. Engineering Drawing. Student s Book. NATED Series. M Cameron TVET FIRST NATED SERIES
The TVET First NATED Series offers students and lecturers a wide range of courses, written by lecturers, examiners and subject experts. Troupant/Macmillan have developed brand new books that cover the
More informationCOURSE OUTLINE GRAPHIC COMMUNICATIONS FOR ARCHITECTURE wk Credits Class or Lecture Lab. Work Hours Course Length
COURSE OUTLINE ARC102 Course Number GRAPHIC COMMUNICATIONS FOR ARCHITECTURE Course Title 3 1 4 15 wk Credits Class or Lecture Lab. Work Hours Course Length Catalog Description: A lecture/studio course
More informationENGINEERING. Unit 10 Computer Aided Design (CAD) 2016 Suite. Cambridge TECHNICALS LEVEL 3
2016 Suite Cambridge TECHNICALS LEVEL 3 ENGINEERING Unit 10 Computer Aided Design (CAD) T/506/7276 Guided learning hours: 60 VERSION 4 - June 2017 black line indicates updated content ocr.org.uk/engineering
More informationProduct content. Common for both Research and Commercial Editions. Solidworks DCAD Matrix. Coimbatore Cad Solutions Pvt Ltd.
Product content Common for both Research and Commercial Editions Solidworks 2018 3DCAD Matrix Coimbatore Cad Solutions Pvt Ltd Page 1 of 7 3D CAD MATRIX SOLIDWORK PREMIUM PROFESSIONAL STANDARD Ease of
More informationCOURSE OF STUDY UNIT PLANNING GUIDE COMPUTER AIDED DESIGN (CAD) 2 GRADE LEVEL: MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR
COURSE OF STUDY UNIT PLANNING GUIDE FOR: COMPUTER AIDED DESIGN (CAD) 2 GRADE LEVEL: 10 12 PREPARED BY: 5 CREDITS CURT BANICKI 1 FULL YEAR MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR
More informationHOLY ANGEL UNIVERSITY College of Engineering & Architecture Department of Mechanical Engineering
University Vision, Mission, Goals and Objectives: Mission Statement (VMG) HOLY ANGEL UNIVERSITY College of Engineering & Architecture Department of Mechanical Engineering We, the academic community of
More informationCAPILANO UNIVERSITY COURSE OUTLINE
CAPILANO UNIVERSITY COURSE OUTLINE Term: Fall 2015 Course No. APSC 130 Course: TECHNICAL DRAFTING AND COMPUTER-AIDED DESIGN INSTRUCTOR Office: FR?? Tel: 604-986-1911 (Ext.??) email: @capilanou.ca Credits:
More informationBCN 1251C Construction Drawing Section: Credits Spring 2016
BCN 1251C Construction Drawing Section: 5889 3 Credits Spring 2016 Meeting Location: RNK210 Meeting Time: T, R 8-9 Periods Instructor: Yuanxin 'Alex' Zhang Logan K. To Ph.D. Candidate Office: RNK324 Office:
More informationEngineering Technology (2010) Sample work program A. September 2010
Engineering (2010) Sample work program A September 2010 Engineering (2010) Sample work program A Compiled by the Queensland Studies Authority September 2010 A work program is the school s plan of how the
More informationCOASTAL BEND COLLEGE WELDING SYLLABUS (Revised 8/10) Introduction to Blueprint Reading for Welders
COASTAL BEND COLLEGE WELDING SYLLABUS (Revised 8/10) WLDG 1313: Introduction to Blueprint Reading for Welders Semester Hours: 3 Textbooks: Blueprint Reading For Welders, by A.E. Bennett & Louis J. Siy,
More informationPower tools for mechanical design. AutoCAD. Mechanical
Power tools for mechanical design. AutoCAD Mechanical The AutoCAD Mechanical Advantage To compete and win in today s design marketplace, engineers need to create and revise mechanical drawings faster than
More informationDevelopments in BIM Infrastructure Design. Barry Blake 3 rd June 2014
Developments in BIM Infrastructure Design Barry Blake 3 rd June 2014 BIM Infrastructure Design BIM Collaboration / Sharing / Design validation / Integrating various elements of design What are we delivering
More informationSOLIDWORKS 2017 Basic Tools
SOLIDWORKS 2017 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationCOURSE OF STUDY UNIT PLANNING GUIDE COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY SUPERVISOR
COURSE OF STUDY UNIT PLANNING GUIDE FOR: COMPUTER AIDED DESIGN (CAD) 1 GRADE LEVEL: 10-12 PREPARED BY: 5 CREDITS CURT BANICKI 1 FULL YEAR JAMES HAHN MICHAEL WEBER, ASST PRINCIPAL ENGINEERING/TECHNOLOGY
More informationMechanical Drafting and Design
Teacher Assessment Blueprint Test Code: 5272 / Version: 01 Copyright 2012 NOCTI. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment
More informationCOURSE TITLE: ENGINEERING DRAWING 2 GRADES LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE:
COURSE TITLE: ENGINEERING DRAWING 2 GRADES 10-12 LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE: SPRING 2015 Engineering Drawing 2-2 Rutherford High School Rutherford, NJ
More informationChabot-Las Positas Community College District SABBATICAL LEAVE APPLICATIONS
Chabot-Las Positas Community College District SABBATICAL LEAVE APPLICATIONS 2017 2018 Bielawski, Toby LPC F 2017, S 2018 Davis, Matthew Chabot S 2018 Fields, Debbie LPC F 2017 Golojuch, Janice Chabot F
More informationContents. Notes on the use of this publication
Contents Preface xxiii Scope Notes on the use of this publication xxv xxvi 1 Layout of drawings 1 1.1 General 1 1.2 Drawing sheets 1 1.3 Title block 2 1.4 Borders and frames 2 1.5 Drawing formats 2 1.6
More informationDesign Intent. ENGR 1182 SolidWorks 4
Design Intent ENGR 1182 SolidWorks 4 Today s Objectives Design Intent Fully Defined Design Analysis SW04 In-Class Activity Fully Defining a Profile Starbucks Coffee Cup Analysis SW04 Out-of-Class Homework
More informationSOLIDWORKS Essentials
SOLIDWORKS Essentials Length: 5 days Prerequisite: Mechanical design experience and experience with the Windows operating system. Description: SOLIDWORKS Essentials teaches you how to use SOLIDWORKS mechanical
More informationDesign Representation 1
Once a design is conceptualized, it must be represented and communicated to others in a complete and technically accurate fashion. GET130 Intro to Engineering Technology Fall 2016 Communication methods:
More information