Supplier Document Front Sheet. Kenz Cranes B.V. P337N001 / P338N001. Centrica Storage C GA Machinery House C15062/B000/01/42/200/00030:001
|
|
- Clare Poole
- 5 years ago
- Views:
Transcription
1 Supplier Document Front Sheet Suppliers Name: Suppliers Order Number: Kenz Cranes B.V. P337N001 / P338N001 Customer: Contract Number: Hull Number: Centrica Storage C15062 BD Crane (RBD-L-7992) / BP Crane (RBP-L-7992) Document Title: GA Machinery House Document Number Kenz: 6510_100 Document Number Client: C15062/B000/01/42/200/00030:001 Revision Date Remarks For info Comments client incorporated To be filled in by client after review Supplier Document Status Client Comments 1 APPROVED 2 APPROVED: Work May Proceed, Incorporate Comments And Re-Submit 3 NOT APPROVED: Work May Not Proceed, Revise And Re-Submit 4 INFO For Information Only Acceptance does not relieve the Supplier/Sub-Contractor of any contracted responsibility of the correctness or quality of work warranty and guarantee noted or implied in the order. Comments made do not imply acceptance of any cost or delivery impact. Department Print Name Sign Date CSL Project Manager Steve Caley 26/04/16 KF-OPER-M-SH-001-A Supplier Document Front Sheet
2 Name of Reviewer: Steve Caley Date issued for comment: 11/03/2016 Date to be returned: 25/03/2016 Date Section Reference No further comments Comments Project Engineer s Response to comments Reviewers approval to response YES/NO Date: Print Name: Signature: 29/03/16 Steve Caley
3 Name of Reviewer: Richard Lamb Date issued for comment: 11/03/16 Date to be returned: 25/03/2016 Date Section Reference Comments Project Engineer s Response to comments Reviewers approval to response YES/NO Date: Print Name: Signature:
4 Name of Reviewer: Paul Walker Date issued for comment: 11/03/16 Date to be returned: 25/03/2016 Date Section Reference Comments Project Engineer s Response to comments Reviewers approval to response YES/NO No comments at this stage Date: Print Name: Signature: 22/03/2016 Paul Walker
5 Name of Reviewer: Calum Mackenzie Date issued for comment: 11/03/16 Date to be returned: 25/03/2016 Date Section Reference Comments Project Engineer s Response to comments Reviewers approval to response YES/NO Are the accumulators suitable for manual handling - they look close to the rood so doesn't look like rigging can be utilised Yes, the accumulators are suitable for manual handling Cooler 1. It is assumed the maintenance beam will come out far enough in order for the oil cooler to not require removal if for example the engine was being removed Cooler 2. It is assumed the cooler could be removed/ bolts accessed without the requirement for scaffolding, please confirm Cooler 3. Oil cooler to be supplied with suppliers lifting point certification (Not relevant to drawing, general observation) Cooler 4. It is assumed that cooler hoses/ bulkheads will be clear of access to and from the ladder to avoid trip hazards etc Is it possible to grease the door hinges with the door open, but without going "outside" - I.e, if the door is opened, can the grease gun fit through the opening to access the hinge (This is of course presuming the hinges will be greased to prevent corrosion etc) Cooler 1: Confirmed Cooler 2: Confirmed Cooler 3: Oil cooler to be lifted with soft slings, certified lifting lugs are not provided. Cooler 4: Confirmed Yes, the hinges can be greased without going outside
6 Please advise if there is enough H.O.L for the rigging to be attached to the engine for removal on the maintenance beam, OR, of the lift requires to be on the skid assembly and a rigging from for lifting out with the maintenance beam Please confirm if the emergency power unit requires removal if the engine was being removed out the doors Does the 1 light on the RHR of the machinery house on the handrails adequate to safely access the radiator when dark? (Potentially overhead lighting we are unaware off at this time) If identical for both cranes, please mark this on the document description Document Code 2 The lifting lugs of the engine are located midway, therefore enough height is available for lifting with the maintenance beam. Yes, the emergency power units needs to be removed first. All service and inspection points of the radiator are located inboard of the machinery house roof and adequately lighted. Both Kenz installation numbers are mentioned on the drawing. Date: Print Name: Signature: 14/03/16 Calum Mackenzie Calum Mackenzie
7 CHALMIT PROTECTA HYDRAULIC OIL 2x18W COOLER OK-EL-14L AI WA TL SUPPORT AI GA POWER UNIT AI AI ROPE GUARD ON RAILING RADIATOR BANK SK AI AI WA WALKWAY AI WA LADDER AI AI WA FRAME HYDRAULIC OIL COOLER AI VENTILATOR Ø565 - PCD Ø605 AI GA POWER UNIT RADIATOR BANK E6VENTRAX500RAINCAP RAIN CAP RAX 500 AI ADAPTOR FOR VENTILATION Ø506 H=200 AI AI AI AI AI WA WALKWAY MSAFE-DG-820 DOUBLE BAR GATE DG-820 (UDG-32) AI WA WALKWAY AI AI WA TL SUPPORT ANGLE MCELLRUBBER40X20 CELL RUBBER 40x20 nr KROON AI POLYOXIMETHYLEN STRIP AI WA FRONTDOOR DETAIL I AI POLYOXIMETHYLEN STRIP MCELLRUBBER40X20 CELL RUBBER 40x20 nr KROON AI WA FRONTDOOR AI WA DOOR RHS MCELLRUBBER40X20 CELL RUBBER 40x20 nr KROON AI WA DOOR LHS AI WINDOW GLASS RUBBER 3&4 mm EPDM L=2m AI WINDOW GLASS RUBBER 3&4 mm EPDM L=2m AI GRATINGS MACHINERY HOUSE AI GA MH DRAIN PIPE AI GA MH DRAIN PIPE AI WA LADDER AI GA MH DRAIN PIPE AI WA MACHINERY HOUSE AI CABLE BRACKET M-NUTM16MX08D00934-S HEX NUT - DIN ISO M16 M--WSM16D0125A-H WASHER - DIN 125A - ISO M16 AI GA FUEL FILLING LINE PART 2 (KENZ FABRICATION) AI GA FUEL FILLING LINE PART 2 (KENZ FABRICATION) AI STEP SUPPORT PRELIMINARY MGRNP-1/8-180GR GREASE NIPPLE G1/8-180 REMARKS: - FOR GA CRANE, SEE 0010_000 - FOR LIFTING LUGS, SEE SHEET AI BOLT M18x100 WITH GREASELINE M--WSM18D0125A-S WASHER - DIN 125A - ISO M18 - FOR LIFTING LUGS REFERENCE LIST, SEE 9009_002 - WEIGHT AS INDICATED IS WITH HYDRAULIC OIL - WEIGHT AS INDICATED IS WITH ltr FUEL IN TANK - WEIDHT AS INDICATED IS WITHOUT FACTORS FOR: WELDING, PAINT, CABLES AND HOSES DETAIL I Scale: 1:5 AI EYE BOLT M16x120 (KROON ) M-NUTM18MX08D00934-S HEX NUT - DIN ISO M18 Rev. Description: Description GA MACHINERY HOUSE General drawing principles : ISO 128 Surface roughness according to : ISO 1302 Welding symbols according to : ISO 2553 SYSTEM A Shape and position tolerance according to : ISO 1101 General tolerances machined single parts acc. to : ISO 2768-mK General tolerances therm. cut single parts acc to : ISO General tolerances welded constr. according to : ISO BF PO BOX 235, 1500 EE ZAANDAM, ZUIDDIJK 400, 1505 HE ZAANDAM THE NETHERLANDS T +31 (0) , Projection Status Sheet Mass 1 of ,3 kg Scale Drawing nr. 1:20 AE Installation number Document number P337/P338 AJG SHE 6510_100 PreRelease Material Item number AI Size Rev. A1 0 Copyright Kenz Cranes B.V.
8 AI JUNCTION BOX RADIATOR BANK HYDRAULIC OIL COOLER AND AI WA FRAME HYDRAULIC OIL COOLER AI GA FUEL TANK 1200L MCLADDER100MM-HL-SS CABLE LADDER RZE-P-100 CHALMIT PROTECTA 2x18W AI WA TL SUPPORT AI JUNCTION BOX 2600 AI MCLADDER100MM-HL-SS CABLE LADDER RZE-P-100 AI AI GA COOLING WATER LINES MCLADDER200MM-HL-SS AI MCLADDER200MM-HL-HDG E6VENTRAX500RAINCAP AI (2x) RAIN CAP RAX 500 WA WALKWAY AI ADAPTOR FOR VENTILATION Ø506 H=200 (2x) HYDRAULIC OIL TANK, SEE: AI GA POWER UNIT ACCUMULATOR (2x) SB330 50A1-112U-330A RADIATOR BANK CHALMIT PROTECTA 2x18W AI WA TL SUPPORT ANGLE (3x) AI WA DIP TRAY AI WA FILTER RACK B A D C B A AI GRATINGS MACHINERY HOUSE 1905 C.o.G D C 2300 AI C.o.G MCLADDER200MM-HL-SS MCLADDER100MM-HL-SS CABLE LADDER RZE-P-100 MCLADDER200MM-HL-SS SECTION C-C SECTION A-A RADIATOR BANK AI VENTILATOR Ø565 - PCD Ø605 AI AI MSAFE-DG-820 DOUBLE BAR GATE DG-820 (UDG-32) AI WA LADDER AI WA LADDER HYDRAULIC OIL COOLER OK-EL14L AI WA FRAME HYDRAULIC OIL COOLER AI AI PRELIMINARY DF-MDF 160 AI ACCUMULATOR (2x) SB330-10A1-112U-330A AI GA FUEL TANK 1200L AI FILTER (3x) LF 660 AI FILTER (3x) LF 660 AI BATTERY BOX MAIN SWITCH SWITCH GHG R0003 SWITCH TYPE ACCUMULATOR (2x) SB330-10A1-112U-330A HEATER THERMOSTAT 8040/1260-R54/-20 AI FIRE EXTINGUISHER AI GA EMERGENCY POWER UNIT 37kW Ex d AI INSIDE MH AI INSIDE MH REMARKS: - FOR GA CRANE, SEE 0010_000 - FOR LIFTING LUGS, SEE SHEET - FOR LIFTING LUGS REFERENCE LIST, SEE 9009_002 - WEIGHT AS INDICATED IS WITH HYDRAULIC OIL - WEIGHT AS INDICATED IS WITH ltr FUEL IN TANK - WEIDHT AS INDICATED IS WITHOUT FACTORS FOR: WELDING, PAINT, CABLES AND HOSES Rev. Description AI CABLE BRACKET MCLADDER600MM-HL-SS CABLE LADDER RZE-P-600 SECTION B-B MCLADDER200MM-HL-SS AI WALL SOCKET GHG R0001 SECTION D-D Description: GA MACHINERY HOUSE General drawing principles : ISO 128 Surface roughness according to : ISO 1302 Welding symbols according to : ISO 2553 SYSTEM A Shape and position tolerance according to : ISO 1101 General tolerances machined single parts acc. to : ISO 2768-mK General tolerances therm. cut single parts acc to : ISO General tolerances welded constr. according to : ISO BF PO BOX 235, 1500 EE ZAANDAM, ZUIDDIJK 400, 1505 HE ZAANDAM THE NETHERLANDS T +31 (0) , Projection Status Sheet Mass 2 of ,3 kg Scale Drawing nr. 1:20 AE Installation number Document number P337/P338 AJG SHE 6510_100 PreRelease Material Item number AI Size Rev. A1 0 Copyright Kenz Cranes B.V.
9 AA AA BB BB SECTION AA-AA AH AJ AI BRACKET FOR AIR HEATER MCLADDER600MM-HL-SS CABLE LADDER RZE-P-600 OFF LINE FILTRATION UNIT AH AJ SECTION AH-AH SECTION AJ-AJ PRELIMINARY 410 SECTION AK-AK AK AK Rev. Description SECTION BB-BB Description: GA MACHINERY HOUSE AI STEP SUPPORT AI GRATINGS MACHINERY HOUSE MCLADDER600MM-HL-SS CABLE LADDER RZE-P-600 AI STEP SUPPORT AI GRATINGS MACHINERY HOUSE REMARKS: - FOR GA CRANE, SEE 0010_000 - FOR LIFTING LUGS, SEE SHEET - FOR LIFTING LUGS REFERENCE LIST, SEE 9009_002 - WEIGHT AS INDICATED IS WITH HYDRAULIC OIL - WEIGHT AS INDICATED IS WITH ltr FUEL IN TANK - WEIDHT AS INDICATED IS WITHOUT FACTORS FOR: WELDING, PAINT, CABLES AND HOSES General drawing principles : ISO 128 Surface roughness according to : ISO 1302 Welding symbols according to : ISO 2553 SYSTEM A Shape and position tolerance according to : ISO 1101 General tolerances machined single parts acc. to : ISO 2768-mK General tolerances therm. cut single parts acc to : ISO General tolerances welded constr. according to : ISO BF PO BOX 235, 1500 EE ZAANDAM, ZUIDDIJK 400, 1505 HE ZAANDAM THE NETHERLANDS T +31 (0) , Projection Status Sheet Mass 3 of ,3 kg Scale Drawing nr. 1:20 AE Installation number Document number P337/P338 AJG SHE 6510_100 PreRelease Material Item number AI Size Rev. A1 0 Copyright Kenz Cranes B.V.
BVS Cable support systems
Installation manual BVS Cable support systems Installation method Additional products Industriveien 29, 2020 Skedsmokorset, Norway BVS CABLE SUPPORT SYSTEMS Content Page no. Description 3-11 BVS Additional
More information15. Spare part list. Typing. Fabrikationsnr.: Type no.: Prod. no.: Prod. nr.: Ballart nr.: Årgang: Max. arb. tryk: Year: Max.
15. Spare part list Typing. Type no.: Ballart nr.: Fabrikationsnr.: Prod. no.: Prod. nr.: Årgang: Year: Jahr: Max. arb. tryk: Max. pressure: Max. Druck: Egenvægt: Own weight: Eigengewicht: Spænding: Voltage:
More informationDiesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
More informationINSPECTION REPORT N o
Page: 1/11 PROJECT: TPI for Stud, bolt, nut and washer Ref: INS/SH-16/0074 BV Client: Simgetek Manufacturing and Engineering Co. Lnc Supplier: Jiaxing Haina Fastener Co., Ltd P/o nr: N/A (client to BV)
More informationBP Brine Pro Brine Maker. Parts List. This Parts List is for BP-2000 brine makers with serial numbers beginning with and higher.
November, 0 Lit. No., Rev. 0 BP-000 Brine Pro Brine Maker Parts List This Parts List is for BP-000 brine makers with serial numbers beginning with 00 and higher. A DIVISION OF DOUGLAS DYNAMICS, LLC FRAME
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Turf Equipment MODEL 20HP Enforcer 44 22HP Enforcer 48 23HP Enforcer 54 ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly..................................
More informationLAD-TRS Series Mobile Ladder Stands with Straddle Base Instruction Manual
Rev..3.08 LAD-TRS, MANUAL Vestil Manufacturing Corp. 999 North Wayne Street, P.O. Box 507, Angola, IN 6703 Telephone: (60) 665-7586 -or- Toll Free (800) 38-0868 Fax: (60) 665-339 Web: www.vestilmfg.com
More informationDiesel Hammer Model D19-42 Part #
Diesel Hammer Model D19-42 Part # 120491 2 Diesel Pile Hammer Part # 120941 Pos Order No. Pg Description Qty 120941 Diesel Pile Hammer D19-42 (Bauer MNR:426514) 1 160198 4 Cylinder Lower Part cmpl 1 2
More informationHL260M PARTS BREAKDOWN
HL0M PARTS BREAKDOWN Build Code ACW-0 BB-05 MA0 EP- PLEASE USE THE PARTS LISTS THAT FOLLOW EACH PICTURE TO OBTAIN PART NUMBERS Copyright 009 by Godwin Pumps of America, Inc., all rights reserved. No part
More informationASSEMBLY OF THE KNOCKED-DOWN LADDERS: 8 to 12 STEPS STANDARD TOP AND SAFELOCK REQUIRED TOOLS
ASSEMBLY OF THE KNOCKED-DOWN LADDERS: 8 to 12 STEPS STANDARD TOP AND SAFELOCK REQUIRED TOOLS SAFETY GLASSES 7/16" WRENCH OR SOCKET STEP LADDER OF APPROPRIATE HEIGHT (2) 9/16" WRENCHES OR SOCKETS RUBBER
More informationDoc #: 2100-AD Revision: - Installation of the DESI Zenith Work Platforms. Author(s): Derek Guenther, Miranda Saucedo, Tammie Lavoie
Doc #: 2100-AD-015-0074 Revision: - Installation of the DESI Zenith Work Platforms Author(s): Derek Guenther, Miranda Saucedo, Tammie Lavoie Contents Revision History... 3 1.0 Purpose... 4 2.0 Applicable
More informationASSEMBLY INSTRUCTIONS. Construction type approved Reg. no S819 F ENERGY AND SANITARY SYSTEMS
Heliostar 252 S4 and 218 S4 FREE-STANDING INSTALLATION vertical ASSEMBLY INSTRUCTIONS Construction type approved Reg. no. 011-7S819 F ENERGY AND SANITARY SYSTEMS Safety instructions Safety instructions
More informationGENERAL ASSEMBLY TCR 2000/2 1:4 DRG 1368D 10 25/01/ / 1. If In Doubt Ask REVISION HISTORY. Part Number. 7.5 kg D01-AH6 REV0 REV.
REVISION HISTORY REV. DATE APPROVED 0 Part Number DRG 1368D 10 Title of Part GENERAL ASSEMBLY 1:4 Scale Designed By Drawn By Checked By Approved By Surname Adam Migala E. Crichton B. Aitken Title of Project
More informationBX1956 Installation Instructions Chrysler PT Cruiser (Include Turbo)
BX1956 Installation Instructions 2001-04 Chrysler PT Cruiser (Include Turbo) Serial No. The front fascia and metal bumper are removed for baseplate installation. Factory metal bumper will not be reinstalled.
More informationSTOP. V00029AC Rev. 04 READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID TOOL LIST. NET-ACCESS S-Type Network Cabinets
Rev. 04 STOP READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID NET-ACCESS S-Type Network Cabinets -Phillips screwdriver -Flatblade screwdriver -22mm socket wrench -15mm socket wrench
More informationMANUAL HYDROBAR. Manufactured by: 7991 CZ DWINGELOO 7990 AA DWINGELOO The Netherlands
MANUAL HYDROBAR WARNING Before installing the HYDROBAR, read the warnings and advisements on page 9 for personal and system safety, and for optimum performance, make sure you thoroughly understand the
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationDIAMOND CONCRETE SAW PARTS LIST MODEL CC1113-XL P R O D U C T S. June Part #
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC1113-XL June 013 Part #10 TABLE OF CONTENTS Description Page No. Saw Assembly (Normal Cut).... - Saw Assembly (Up-Cut)...... - Gas Engine Assembly......
More informationFRONT BUMPER KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 6
FRONT BUMPER KIT P/N 2882301 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these
More informationMANUAL HYDROBAR. Manufactured by: Fax: H/US/Hydrobar/ /00 Klay Instruments Page 1
MANUAL HYDROBAR WARNING Before installing the Hydrobar, read the warnings and advisements on the last page for personal and system safety, and for optimum performance, make sure you thoroughly understand
More information2.19. Fixing systems for installing luminaires. Complete systems and single components
.19 for installing luminaires Complete systems and single components The one-off manufacture of individual assembly systems for installing lighting systems is often very costly. The patented Complete ssembly
More informationAssmann Corporation of America TANK INSTALLATION AND USE GUIDELINES FOR BULK STORAGE TANKS
Assmann Corporation of America TANK INSTALLATION AND USE GUIDELINES FOR BULK STORAGE TANKS General Information Assmann polyethylene storage tanks are manufactured to give you the toughest, most reliable
More informationIMPORTANT INSTALLATION INSTRUCTIONS ATTACHED
IMPORTANT INSTALLATION INSTRUCTIONS ATTACHED For Full-Color Installation Instructions, Please Visit: VOLANT.COM and Search by Part Number Please be sure to review the enclosed instructions prior to beginning
More informationParts Manual for: MODELS / I.D. : / ZTH5223A / ZTH5225A / ZTH6125A
Parts Manual for: MODELS / I.D. : 968999153 / ZTH5223A 968999154 / ZTH5225A 969999155 / ZTH6125A Husqvarna policy is to improve its products whenever it is possible and practical to do so. In an effort
More informationDX450 Red-D-Arc PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-582 RETURN TO MAIN INDEX PARTS LIST FOR DX450 Red-D-Arc P-582 Index of Sub
More informationHR24TS Rotary Rake. Serial Numbers less than Illustrated Parts Breakdown. Curtain & Guards, Front
HRTS Rotary Rake Serial Numbers less than 00 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page Page Page Tongue Front Frame Front Axle Curtain & Guards, Front Front Pivot Bridge
More informationHYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
More informationCable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Top Support Kit: (x2) - 2 Top Supports. Quantities are per bench
Parts Included (per back to back bench) Column Kit: (x2) - 1 LH & 1 RH Column - Control Box - Hand Switch Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Depth Support Kit: -
More informationInstallation Manual Roof Zone Ladder Rack
Installation Manual Roof Zone Ladder Rack 102113,E1346 Installation Time: About 90 minutes. Depending on truck and Do-it-Yourself experience level Tools Required: Electric Drill with 1/2 Chuck 1/2 & 7/32
More informationOWNER S MANUAL STORAGE SHED MODELS: STOR-96-G-W-1RH & STOR-912-G-W-1RH
STORAGE SHED MODELS: STOR-96-G-W-1RH & STOR-912-G-W-1RH OWNER S MANUAL Introduction.. 1 Assembly Instructions STOR-96-G-W-1RH... 2 Assembly Instructions STOR-912-G-W-1RH... 8 STOR-96-G-W-1RH Exploded Parts
More informationCOMMERCIAL MOWERS PARTS MANUAL FOR: MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251
PARTS MANUAL FOR: COMMERCIAL MOWERS MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251 FD KEES POWER EQUIPMENT, L.L.C. 700-800 PARK AVENUE BEATRICE, NEBRASKA, U.S.A. 68310 PRINTED IN USA MANUAL NO.-102935 REV.
More informationPARTS MANUAL Rev A
PARTS MANUAL 4000394 Table of Contents Part Index for Trailer --------------------------------------------- 2 Trailer Figure ----------------------------------------------------- 6 Trailer Figure 2 -----------------------------------------------------
More informationSECTION 7 CHANNEL & SUPPORT SYSTEMS
SECTION 7 CHANNEL & SUPPORT SYSTEMS Unitrunk Intelok Channel is a strong, easy to erect support system, ideal for supporting cable trays, cable ladders, pipes and ducting and is adaptable for use in many
More informationRe-Grab Safety Gate. These industrial safety gates come pre-assembled and are easily installed.
Manufactured from durable and corrosive resistant polyurethane, the RE-GRAB Safety Gate will not corrode or degrade even in aggressive chemical environments. They are self-extinguishing to UL94 and are
More informationINSTALLATION. For more information on this product or to order samples call or visit our website at builddirect.com.
Page 1 Page 2 Page 3 Page 4 Page 5 1. Door Assembly: Step A: Attach part #34 to part #35 with screws #65/67. Step B & C: Attach part# 34.35(36) to part #33 with two #70 screws. Step D: Insert door bottom
More informationx16 GAZEBO ASSEMBLY INSTRUCTIONS
adlonco@hotmail.com 36-3 1 x16 GAZEBO ASSEMBLY INSTRUCTIONS Two or more adults required for assembly 0 ZZZ-05.36-3.117-15.GP.EN.HER.doc Before you assemble the Gazebo It is important that this gazebo be
More information4Post Trakslider Instructions
4Post Trakslider Instructions FOR ASSEMBLY ASSISTANCE CONTACT CUSTOMER SERVICE AT 1-866-217-0330 (MONDAY THRU FRIDAY 8 AM - 5 PM EST) PAGE 1 OF 31 INST0083 REV2 WS 4/16/08 Tools Required for Assembly Or
More informationDropped Objects Who s Responsible. Presented by Bob Thompson, Chevron Indonesia
Dropped Objects Who s Responsible Presented by Bob Thompson, Chevron Indonesia Design - Bolt fell from URA to Drillfloor - 1.6kg x 25m A bolt attaching the gripper head to the upper racking arm came loose
More informationSTAGE DEX STAGE DEX. Birch plywood, special water resistant quality, anti skidding top layer
The Stage DEX staging system consists of an aluminium frame made from a special extruded profile. The plywood top is bolted and glued to this frame to reduce noise and vibration. Several leg types and
More informationGARAGE DOOR WITH TORSION SPRING
GARAGE DOOR WITH TORSION SPRING DIMENSIONS 9 WIDTH X 7 HEIGHT (2.74m x 2.13m) IMPORTANT SAFETY INSTRUCTIONS WARNING: Read all instructions and warnings before use. Failure to follow all instructions may
More informationSHED-5932-F, MANUAL.doc
VESTIL MANUFACTURING CORP. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: HUsales@vestil.comU
More informationParts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252
Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252 Professional Quality Lawn Care Equipment since 1945 THIS MANUAL INCLUDES UPDATES ON PAGES 6,10, & 20. Yazoo/Kees Power Equipment policy is to improve
More informationAssembly Guide for Series 500 Ridge Vent Kits
Assembly Guide for Series 500 Ridge Vent Kits Photo shows a sample ridge vent as installed on a greenhouse. Actual building and ridge vent length may differ. 2014 ClearSpan All Rights Reserved. Reproduction
More informationPlease read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.
Attachment Tab Height: 16-1/2 Serial Number Attachment Tab Width: 24 Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and
More informationZVKH52230 ZVKH61250 ZVKE61260 ZVKH61270 ZVKE72260 ZVKH72270 ZVKHL61230 ZVKW52250 ZVKW61230 ZVKW61250 MANUAL REV.
Parts Manual Models ZVKH52230 ZVKH61250 ZVKE61260 ZVKH61270 ZVKE72260 ZVKH72270 ZVKHL61230 ZVKW52250 ZVKW61230 ZVKW61250 MANUAL 106149 REV. 04 (10/09/02) Model Number: Serial Number: Date of Purchase:
More informationFREEDOM 2 PORTABLE RESTROOM ASSEMBLY INSTRUCTION
FREEDOM 2 PORTABLE RESTROOM ASSEMBLY INSTRUCTION 2530 Xenium Lane North, Minneapolis, MN 55441 Telephone: 763-553-1900 Fax: 763-553-1905 800-328-3332 / www.satelliteindustries.com PN 14579/REV. X 9/06
More informationRequirement for Holes - Holes for Hanging
Requirement for Holes - Holes for Hanging In order for items to progress through the series of pretreatment and galvanizing baths at our facility, they must be suspended in a suitable manner to ensure
More informationInstallation Instructions
Installation Instructions Alpha SolarSmart On Roof Kits for the Installation of Alpha Solar Collectors onto Tile and Slate Type Roofs For Technical help or for Service call... ALPHA HELPLINE Tel: 0 77
More informationEMB MANUFACTURING INC.
TRAILER WOOD PROCESSOR MODELS WP865, WP835, WP635 ASSEMBLY INSTRUCTION MANUAL Please review and understand the operators manual before attempting to operate this machinery. EMB MANUFACTURING INC. 4144
More informationINSTALLATION INSTRUCTIONS WINCH MOUNTING PLATE FOR STOCK BUMPER Part Number: 88140, FOR 8274 Application: Jeep JK 2012+
INSTALLATION INSTRUCTIONS WINCH MOUNTING PLATE FOR STOCK BUMPER Part Number: 88140, 88418 FOR 8274 Application: Jeep JK 2012+ GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important.
More informationx12 GAZEBO ASSEMBLY INSTRUCTIONS
adlonco@hotmail.com 30 10 x1 GAZEBO ASSEMBLY INSTRUCTIONS Assembly with more than one person recommended 0 ZZZ-0.30.100-1.GP.EN.HER.doc Before you assemble the Gazebo It is important that this gazebo be
More informationOPERATORS MANUAL WEEKENDER STEEL LADDER RACK
OPERATORS MANUAL WEEKENDER STEEL LADDER RACK WWW.WEATHERGUARD.COM MODELS 1450 & 1475 1475 Shown INSTALLATION TIME Approximate installation time: 60 minutes (depending on truck equipment installation experience
More informationMANUAL MOUNTING SYSTEM FOR BITUMEN / EPDM
MANUAL MOUNTING SYSTEM FOR BITUMEN / EPDM EN mounting system for insulated pitched roof Bitumen / EPDM for solar panels landscape setup ESDEC BV 2015 TABLE OF CONTENT 1. Introduction 1 2. General installation
More informationNSP/ 007 / 006 Guidance on Substation Design: Transformer Transport, Delivery and Installation
Version:- 1.0 of Issue:- March 2016 Page 1 of 7 NSP/ 007 / 006 Guidance on Substation Design: Transformer Transport, Delivery and Installation 1. Purpose The purpose of this document is to provide guidance
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS KA7EM ROTISSERIE OVEN ML-137710 ML-137711 ML-137713 ML-137714 Glass Back With Grease Assist Glass Back Without Grease Assist Solid Back With Grease Assist Solid Back Without
More informationMANUAL REV. 03 (11/26/01)
Parts Manual MANUAL 539105906 REV. 03 (11/26/01) Models: 968999175 / ZTH7226KOA 968999180 / ZTH5221KAA 968999181 / ZTH5223KAA 968999182 / ZTH5223KOA 968999183 / ZTH5223KOLA 968999184 / ZTH5225KOA 968999185
More informationOPERATION AND MAINTENANCE MANUAL. mcr TLB ECO GATES
ASSA ABLOY Mercor Doors sp. z o.o. ul. Arkońska 6, bud. A2 80-387 Gdańsk tel. +48 58 732 63 00 fax +48 58 732 63 02/03 www.mercordoors.com.pl e-mail: mercordoors@assaabloy.com OPERATION AND MAINTENANCE
More information8030 Synergy Jeep JK Rear Long Arm Frame Brackets
General Notes: SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 8030 Synergy Jeep JK Rear Long Arm Frame Brackets These instructions are also available on our website; www.synergymfg.com.
More information101B, 210X, ELM, VSTB Installation Manual
101B, 210X, ELM, VSTB Installation Manual 99-16105-I001 Copyright 2010 by ALL rights reserved. Information in this document is subject to change without notice. Companies, names and data used in examples
More informationINSTALLATION MANUAL WEEKENDER STEEL LADDER RACK
TRUCK STORAGE SOLUTIONS SECURING YOUR REPUTATION INSTALLATION MANUAL WEEKENDER STEEL LADDER RACK STEEL & ALUMINUM SIDE BOX WITH PACK RAT DRAWER UNITS MODELS ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS
More informationInstallation Instructions
Instructions Created by an: Sidekick/Tracker 4 Door & 2 Door Roof Racks for Solid Tops (SKU# KEB-RR-4D & KEB-RR-2D) Installation Instructions Revised 4-16-14 Notice: These instructions (Pictures and Text)
More informationSwivel Sector Radial Penstock
Swivel Sector Radial Penstock 24/03/2015 - TAINTOR type radial penstock. - Mechanically welded stopboard with sectoral shape, fitted with side wheels to guarantee correct guiding of the penstock throughout
More informationPlease read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment.
2005-08 Pontiac G6 GT Please read BOTH these and the General Towing Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed
More informationREAD ME! IMPORTANT WARNING! ENG. Front Support arms
Front Support arms Jeep Wrangler JKU Door (007-Current) ENG FAJK00 READ ME! Thank you for purchasing Front Runner Jeep Wrangler JKU door Front Support Arms. Before you start, take a moment to familiarize
More informationInstallation instructions for oil unit CADDY FURNACE PA03050 and PA03100
Installation instructions for oil unit CADDY FURNACE PA03050 and PA03100 Read these instructions carefully before installing and operating your furnace. Please keep this document! This manual is available
More informationSERVICE MANUAL BMG-780 ULTRAPRO VERSION 1.0
SERVICE MANUAL BMG-780 ULTRAPRO VERSION 1.0 FOR MORE INFORMATION VISIT WWW.DIAMATICUSA.COM Diamatic 05/2013 This document is not contractual Design and technical specifications may be subject to changes
More informationHELLENIC PIPEWORKS S.A.
Installation Manual GEO N2-W4-A Revision/Date: V.2/30.05.2015 HELLENIC PIPEWORKS S.A. VEHICLE RESTRAINT SYSTEMS PIPING METAL CONSTRUCTIONS 67 th km ATHENS-LAMIA N.R. P.O. Box 39, P.C. 32009 SCHIMATARI
More information** Do Not Contact the Store ** For Assistance, including missing or broken parts, Call Customer Service at:
3/01/2007 VISIT THE LITIME WEB SITE: WWW.LITIME.COM ** Do Not Contact the Store ** For Assistance, including missing or broken parts, Call Customer Service at: 1 (800) 225-3865 Double Shed Doors for Back
More informationASSEMBLY INSTRUCTIONS 10 X14 HIGGINS HARDTOP GAZEBO ITEM# L-GZ212PST-4
3811110 ASSEMBLY INSTRUCTIONS 10 X14 HIGGINS HARDTOP GAZEBO ITEM# L-GZ212PST-4 Parts List Square pole A 4 Round pole B 4 Short arch bar C 4 Long arch bar D 6 Long beam 1 E1 2 Long beam 2 E2 2 Long beam
More informationKitchen exhaust fan GLEB
Kitchen exhaust fan GLEB Contents Kitchen exhaust fan - GLEB...3 Performance Data...4 Dimensions...5 Wiring diagram...6 General description...7 Applications...7 Demand control ventilation...7 Quiet operation...7
More information0,25T Hoist and Trolley TCR 250 AT2S DRG /01/ / 1. If In Doubt Ask REVISION HISTORY. Part Number. 32kg Weight REV.
D-AHT REV REVISION HISTORY REV. DATE APPROVED Scale not to scale Part Number DRG Designed By Drawn By Checked By Approved By Sheet Size A Material Surname T. Mikolajewski T. Mikolajewski B. Aitken Title
More informationseries 1500e/Xe Cooling Tower
series 1500e/Xe series 1500e/Xe Cooling Tower rigging & assembly instructions series 1500e/Xe Cooling Towers should be rigged and assembled as outlined in this bulletin. These procedures should be thoroughly
More informationRoller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides
Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides Application example linear systems, drives and accessories 1 2 3
More informationINSTALLATION INSTRUCTIONS ROPE ASSEMBLIES FATZER AG WITH HYEND SOCKETS FOR FROM. Kai-J. Thiem (THK) Martin Bechtold (BEM)
INSTALLATION INSTRUCTIONS FOR ROPE ASSEMBLIES WITH HYEND SOCKETS FROM FATZER AG Created Kai-J. Thiem (THK) Checked Martin Bechtold (BEM) Released Kai-J. Thiem (THK) Version 2.0 Date 30.08.2016 Proof of
More informationImportant Note. Tools Required: Welder capable of fully welding 10 GA.135 steel
INSTALLATION INSTRUCTIONS Frame Reinforcement Kit 11100 (Patent Pending) 1968-72 GM A-Body Coupe/Sedan Read Instructions FULLY before starting Installation Important Note Installation of this kit requires
More informationx12 GAZEBO ASSEMBLY INSTRUCTIONS
30 10 x1 GAZEBO ASSEMBLY INSTRUCTIONS Assembly with more than one person recommended 0 L:\WP51\Instructions\SOLARIUMS INSTRUCTION BOOKS\30\ZZZ-0.30.0807-1.GP.EN.doc Step 1: Assemble beams A and B using
More informationStandard specifications SRA100B-01-FD11
Standard specifications SRA100B-01-FD11 2nd edition 1303, SSRAEN-050-002,001 Table of contents 1. Outline... 1 2. Basic specifications... 2 3. Robot dimensions and working envelope... 3 4. Detail of tool
More informationx16 GAZEBO ASSEMBLY INSTRUCTIONS
36 1 x16 GAZEBO ASSEMBLY INSTRUCTIONS Assembly with more than one person recommended 0 L:\WP51\Instructions\SOLARIUMS INSTRUCTION BOOKS\36\ZZZ-05.36.0810-1.GP.EN.doc Step 1: Assemble beams A and B using
More informationGrowSpan Series 500 Automated Ridge Vent Kits
GrowSpan Series 500 Automated Ridge Vent Kits Photo shows a sample ridge vent as installed on a greenhouse. Actual building and ridge vent length may differ. 2017 Growers Supply All Rights Reserved. Reproduction
More informationHorizontal Band Saw. Operating Instructions and Parts Manual. Models EHB-1018VM EHB-1018VMH
Operating Instructions and Parts Manual Horizontal Band Saw Models EHB-08VM EHB-08VMH JET 427 New Sanford Road LaVergne, Tennessee 37086 www.jettools.com Ph.: 855-336-4032 Part No. M-89070 REV B2 08/204
More informationBharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli , TAMIL NADU, INDIA MATERIALS MANAGEMENT / CAPITAL EQUIPMENT
An ISO 9001 Company Bharat Heavy Electricals Limited (High Pressure Boiler Plant), TAMIL NADU, INDIA MATERIALS MANAGEMENT / CAPITAL EQUIPMENT ENQUIRY NOTICE INVITING TENDER Phone: +91 431 257 7653 Fax
More informationDIAMOND MODEL CC1300-XL P R O D U C T S CONCRETE SAW PARTS LIST. March Part#:
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC1300-XL March 2007 Part#: 1800666 Intentionally Blank Table of Contents Description Page No. Frame Group....4-7 Engine Group 9 Horsepower Gas. 8
More informationD300K 3+3 SE KUBOTA PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-737 P-737 RETURN TO MAIN INDEX PARTS LIST FOR P-737-A P-737-A ILLUSTRATION
More informationFLIP TARP SINGLE & DOUBLE UNDERBODY TRAILERS
1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 FLIP TARP SINGLE & DOUBLE UNDERBODY TRAILERS INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Flip Tarp Trailer system.
More informationOperation, Parts and Maintenance Manual Model Notcher
Operation, Parts and Maintenance Manual Model 16-18 Notcher 6926 Smithville Hwy. McMinnville, TN 37110 Phone: 931-934-2211 Fax: 931-934-2220 Email info@tennsmith.com www.tennsmith.com Proudly Made in the
More informationUser Manual and Installation Instructions
Nivano CTe height adjustable Changing Table User Manual and Installation Instructions Guarantee This product is guaranteed against all defects in manufacture for a period of one year This does not affect
More informationmk Profile Technology
mk Profile Technology One Construction Kit, Many Options Base Technology Profile Technology Conveyor Technology Factory Equipment Linear Motion better products, better solutions One basic technology, four
More informationB32157 UNDERCARRIAGE KIT. Jeep Cherokee Jeep Wagoneer Jeep Comanche Parts List and Installation Instructions CAUTION
October 15, 2007 Lit. No. B64110, Rev. 01 B32157 UNDERCARRIAGE KIT Jeep Cherokee 1984-01 Jeep Wagoneer 1984-93 Jeep Comanche 1986-92 Parts List and Installation Instructions Read this document before installing
More information15T Hoist and Trolley TMH15000/5 AT15S DRG /02/ ,50 1 / 1. If In Doubt Ask REVISION HISTORY. Part Number D01-AHT28 REV0.
REVISION HISTORY REV. DATE APPROVED D-AHT REV Part Number DRG Title of Part Title of Project Scale not to scale Designed By Drawn By Checked By Approved By Surname T. Mikolajewski T. Mikolajewski B. Aitken
More informationMDU-C-SERIES STORAGE RACKS INSTRUCTION MANUAL
VESTIL MANUFACTURING CP. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: sales@vestil.com MDU-C-SERIES
More informationPRINT MAY BE REDUCED - DO NOT SCALE. No Compression Load on Ceiling Possible Lateral Load of 8kg 2 Fixed Pins in Shear with Ceiling
Date 05/207 By No Compression Load on Ceiling Possible Lateral Load of 8kg 2 Fixed Pins in Shear with Ceiling Technical Information: 2x Bugle Screw Guide Fixing Optional Non-penetrating Fixingss to Ground
More informationInstallation Instructions Jeep JL Front Grumper Product Number: GR4600 Application: 18+ JEEP JL
! IMPORTANT SAFETY GUIDE Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided the following warnings, safety precautions,
More informationCLASSIC 300D Kubota PARTS LIST FOR RETURN TO MAIN INDEX
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-498 P-498 RETURN TO MAIN INDEX PARTS LIST FOR CLASSIC 300D Kubota P-498-A P-498-A
More informationINDUSTRIAL MECHANIC (MILLWRIGHT)
Interim Logbook Department of Advanced Education and Skills Apprenticeship and Trades Certification Division INDUSTRIAL MECHANIC (MILLWRIGHT) Note to Apprenticeship Applicants This form can only be used
More informationAluminium Walkways. For Standing Seam Roofing Systems
For Standing Seam Roofing Systems Safety Fabrications has a long history of working within the construction industry providing permanent safe access walkways for inspection, repair and maintenance on pitched
More information8" PIVOT. Model 8000 Pivot - Prior to Feb 2002
" PIVOT Model 000 Pivot - Prior to Feb 00 " Pivot Table of Contents Description Rev. # Pg. # Overall Assembled View... 0-0... Legs & Braces... 0-0... Ladder... 0-0... Collector Ring "J" Tube... 0-0...
More informationParts Manual SPDZTR 42 / SPDZTR 42 BF /
Parts Manual SPDZTR 42 / 966657601 SPDZTR 42 BF / 966657701 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to
More information12T Hoist and Trolley TMH12000/4 AT10S DRG /02/ / 1. If In Doubt Ask REVISION HISTORY. Part Number D01-AHT27 REV0.
D-AHT REV REVISION HISTORY REV. DATE APPROVED Part Number DRG Title of Project Scale Not to scale Designed By Drawn By Checked By Approved By Surname T. Mikolajewski T. Mikolajewski B. Aitken Title of
More informationSTRAIGHT HANDLEBAR KIT
STRAIGHT HANDLEBAR KIT P/N 2881973 APPLICATION All straight bar applications, excluding 550 Indy and Voyageur models BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are
More informationFoot Rail. Land Rover Discovery 5 (L462) START HERE! READ ME FIRST
Foot Rail Land Rover Discovery (L) ENG FALD007 START HERE! READ ME FIRST Don t be a hero and muscle through this without first reading these fitting instructions! Improper installation of this gear may
More information