Select, wear adjust, use and maintain personal protective equipment

Transcription

1 ANALYSIS PROFILE PROTECT SELF AND OTHERS Identify, interpret and apply applicable Acts, Codes and regulations Select, wear adjust, use and maintain personal protective Recognize and assess hazards and hazardous conditions Control Hazards Assemble, erect use and dismantle elevated platforms and scaffolds Perform lock out and tagging Select, operate and maintain tools and Perform housekeeping duties COMUNICATE Demonstrate effective interpersonal relations Receive and react to instructions Give instructions Read and interpret documents and/or job specifications Write job-related documents Practice personal hygiene READ, INTERPRET, AND MAINTAIN DRAWINGS AND SPECIFICATIONS Identify drawings and specifications interpret industry symbols and abbreviations select drawing Create drawings and sketches drawing approval process Maintain ANALYSE AND DESIGN Identify types of Perform jobrelated calculations requirements Identify and devices to be to be devices to be Layout and illustrate the piping (s) Submit design documents for approval(s)

2 ANALYSIS PROFILE PLAN AND PREPARE FOR THE PROJECT Prepare material and labour take off lists Complete all applications and tools and Expedite job Establish a job schedule Verify orders Store material, and tools LAYOUT AND INSTALL PIPE FITTINGS VALVES AND SUPPORTS Field check and verify site drawings select piping materials pipe fittings control valves joining methods pipe supports and Create a series of structural openings Fabricate all pipe supports, sleeves, guides and anchors Install pipe supports, fabricated components and Perform various cutting Join material Perform tube and pipe bending operations Prepare pipe and fittings Install and join pipe and fittings ASSEMBLE AND INSTALL PROCESS PIPING SYSTEM select the process piping s to be Verify pipe and fittings verify the location Install piping s Label and tag piping s Install fire stopping measures

3 ANALYSIS PROFILE INSTALL AND MAINTAIN INSTRUMENTATION CONTROL select piping requiring control types and function of piping instrumentation the control requirements select the control s to be Install, calibrate and maintain control (s) INSTALL EQUIPMENT to be to be Assemble the location of the Install the supports and hanger Install and connect the to various piping INSTALL DEVICES Install the devices device devices used for the Assemble the devices locations of the devices Install device supports and Install and connect the device to various and piping s TEST select the tests for s s the type, duration, pressures and set up requirements for test Perform and/or arrange destructive and non-destructive testing Perform visual inspection of various piping s Perform stress relieving on trade related materials Arrange for test or a testing schedule Perform piping testing Perform water treatment testing Receive and document test reports and results

4 ANALYSIS PROFILE COMISSION ACTIVATE piping s that require commissioning and/or activation and perform the tests for final inspections Flush and chemically treat s calibration and operation of and controls Instruct the end users Check that the s are commissioned/ activated PERFORM RIGGING AND HOISTING Read and interpret specifications and shop drawings Inspect the job site the Schedule the operation Inspect the Connect the rigging to the load Secure the area Perform the lift and moving operation Position and secure the load Disconnect the load Remove and store the rigging Communicate throughout the operation Operate power lifting and PERFORM PREVENTIVE MAINTENANCE Prepare the for inspection mechanical components which require scheduled Prepare service schedules for the client Liaise with the client Obtain approvals to proceed with schedule Perform the performed Recommission the after / full operational status of the Clean up the jobsite Submit relevant

5 ANALYSIS PROFILE TROUBLESHOOT AND REPAIR MECHANICAL Diagnose and assess problem(s) Prepare a service proposal Liaise with the client Arrange for Prepare the s for the approved repairs Perform the service Operate the after all repairs are completed calibration of the and/or components Re-commission the Clean up the job site Submit the relevant