Machinist NOA (2010) Subtask to Unit Comparison
|
|
|
- Lynne Parsons
- 5 years ago
- Views:
Transcription
1 Machinist NOA (2010) Subtask to Unit Comparison NOA Subtask Task 1 Organizes work Interprets documentation. A16 Job Planning 1.02 Plans sequence of operations. A16 Job Planning 1.03 Maintains safe work environment. A16 Job Planning A1 Trade Safety Awareness (ACB Standard) A2 Safety 1.04 Uses personal protective equipment (PPE) and safety equipment. A16 Job Planning A1 Trade Safety Awareness (ACB Standard) A2 Safety 1.05 Uses hoisting, lifting and rigging equipment. A5 Hoisting, Lifting and Rigging 1.06 Operates emergency safety equipment. A1 Trade Safety Awareness (ACB Standard) A2 Safety Task 2 Processes workpiece material Selects workpiece material. A16 Job Planning 2.02 Performs layout. A16 Job Planning 2.03 Marks workpiece for indentification. A16 Job Planning 2.04 Compares drawing information to measurements and features on the workpiece. A16 Job Planning A6 Basic Drawings 2.05 Tests workpiece materials. A12 Material Testing 2.06 Deburrs workpiece. B1 Hand and Power Tools 2.07 Sketches parts. A6 Basic Drawings Task 3 Maintains machines and tooling Cleans machines Lubricates machines. B1 Hand and Power Tools 3.03 Sharpens tooling. B1 Hand and Power Tools 3.04 Applies cutting fluids and coolants B1 Hand and Power Tools
2 3.05 Troubleshoots equipment. B1 Hand and Power Tools 3.06 Maintains machine alignment. B1 Hand and Power Tools 3.07 Maintains inspection equipment. B1 Hand and Power Tools Task 4 Performs hand processes Files workpiece. B1 Hand and Power Tools 4.02 Saws workpiece. B1 Hand and Power Tools 4.03 Performs hole-making operations. D4 Advanced Lathe Drilling, Boring, Reaming, Tapping and 4.04 Performs threading operations. A4 Hand Threading 4.05 Installs thread inserts. A4 Hand Threading 4.06 Broaches workpiece. B1 Hand and Power Tools 4.07 Performs pressing operations. B1 Hand and Power Tools 4.08 Bends workpiece. B1 Hand and Power Tools 4.09 Finishes workpiece. B1 Hand and Power Tools Task 5 Refurbishes components Disassembles components. A9 Mechanical Components 5.02 Analyzes components. A9 Mechanical Components 5.03 Assembles components. A9 Mechanical Components Task 6 Sets up drill presses Selects drill press types. B4 Drill and Drill Presses 6.02 Plans drill sequence. B4 Drill and Drill Presses 6.03 Selects drill press speeds and feeds. B4 Drill and Drill Presses 6.04 Sets up jigs, fixtures and work holding B4 Drill and Drill Presses devices for drill presses Sets up tooling for drill presses. B4 Drill and Drill Presses Task 7 Operates drill presses Drills holes using a drill press. B4 Drill and Drill Presses Cuts countersinks, counterbores, B4 Drill and Drill Presses 7.02 chamfers and spot faces using a drill press Performs tapping using a drill press. B4 Drill and Drill Presses 7.04 Finishes holes using a drill press. B4 Drill and Drill Presses Task 8 Sets up conventional lathes Sets up conventional lathe types Plans sequence of operations for conventional lathes.
3 8.03 Sets up work holding devices for conventional lathes Sets up tooling for conventional lathes Sets up conventional lathe accessories Sets up workpiece on conventional Selects conventional lathe speeds and feeds. Sets up concentric on conventional lathes. Task 9 Operates conventional lathes Turns external surfaces using a conventional 9.02 Bores holes using a conventional 9.03 Faces surfaces using a conventional 9.04 Turns tapers on a conventional 9.05 Knurls using a conventional 9.06 Parts off workpiece using a conventional 9.07 Drills using a conventional Reams holes using a conventional Cuts grooves using a conventional
4 9.10 Cuts threads using a conventional Task 10 Sets up conventional milling machines Selects conventional milling machine types Plans milling sequence Sets up work holding devices for conventional milling machines Sets up tooling for conventional milling machines Sets up milling accessories. Sets up workpiece for conventional Selects conventional milling machine speeds and feeds. Task 11 Operates conventional milling machines Mills surfaces using a conventional Mills profiles and pockets using a conventional Mills slots, grooves and keyways using a conventional Cuts gears and splines using a conventional Drills holes using a conventional milling machine Reams holes using a conventional Cuts countersinks, counterbores, chafers and spot faces using a conventional Performs tapping using a conventional Bores holes using a conventional milling machine. Task 12 Sets up power saws Selects power saw types. B1 Hand and Power Tools Selects saw blades. B1 Hand and Power Tools
5 12.03 Installs saw blades. B1 Hand and Power Tools Selects power saw speeds and feeds. B1 Hand and Power Tools Makes power saw adjustments. B1 Hand and Power Tools Sets up workpiece on power saw. B1 Hand and Power Tools Task 13 Operates power saws Saws straight and angle cuts. B1 Hand and Power Tools Cuts irregular shapes. B1 Hand and Power Tools Task 14 Sets up precision grinding machines Selects precision grinding machine types Plans grinding sequence Sets up work holding devices for precision grinding machines Mounts grinding wheel Sets up grinding accessories Sets up workpiece on precision grinding machines Selects precision grinding machine speeds and feeds. Task 15 Operates precision grinding machines Grinds flat surfaces using a surface grinder Grids profiles Grinds internal and external cylindrical and tapered surfaces Grinds tools and cutters Finishes holes using a honing machine.
6 Task 16 Performs basic CNC programming Review process documentation. G1 Computer Numerical Control ()CNC) Machine - Tools Calculates coordinates for tool path. G1 Computer Numerical Control ()CNC) Machine - Tools Creates basic program. G1 Computer Numerical Control ()CNC) Machine - Tools Inputs program into control memory. G1 Computer Numerical Control ()CNC) Machine - Tools Optimizes program. G1 Computer Numerical Control ()CNC) Machine - Tools Task 17 Sets up CNC machine tools Selects tooling and tool holders for CNC machine-tools. G1 Computer Numerical Control ()CNC) Machine - Tools Sets up tooling and tool holders for CNC machine-tools. G1 Computer Numerical Control ()CNC) Machine - Tools Sets up workpiece for CNC machinetool. G1 Computer Numerical Control ()CNC) Machine - Tools Establishes work datum. G1 Computer Numerical Control ()CNC) Machine - Tools Verifies program. G1 Computer Numerical Control ()CNC) Machine - Tools Task 18 Operates CNC machine-tools Adjusts offsets. G2 Computer Numerical Control (CNC) Operation Monitors machining processes. G2 Computer Numerical Control (CNC) Operation Interrupts program cycle. G2 Computer Numerical Control (CNC) Operation Restarts program cycle. G2 Computer Numerical Control (CNC) Operation
Work Experience Form Machinist
2013 - National Occupational Analysis (NOA) Work Experience Form Machinist 1-877-978-7233 www.manitoba.ca/tradecareers Personal Information (please print) Legal First Name Middle Initial Legal Last Name
Machinist NOA (1998) Subtask to Unit Comparison
Machinist NOA (1998) Subtask to Unit Comparison NOA Subtask Task 1 Demonstrates safe working practices. 1.01 Recognizes potential health and safety hazards. A1 Safety in the Machine Shop 1.02 Recognizes
COMPETENCY ANALYSIS PROFILE GENERAL MACHINIST 429A. (All unshaded skill sets must be demonstrated/completed)
COMPETENCY ANALYSIS PROFILE GENERAL MACHINIST 429A (All unshaded skill sets must be demonstrated/completed) SKILL SETS SKILLS PROTECT SELF AND OTHERS Identify health and safety hazards. Wear, adjust, and
COMPETENCY ANALYSIS PROFILE Tool and Die Maker 430A (All unshaded skill sets must be demonstrated/completed)
COMPETENCY ANALYSIS PROFILE Tool and Die Maker 430A (All unshaded skill sets must be demonstrated/completed) SKILL SETS SKILLS PROTECT SELF AND OTHERS Identify health and safety hazards. Wear, adjust,
COMPETENCY ANALYSIS PROFILE MOULD MAKER 431A (All unshaded skill sets must be demonstrated/completed)
COMPETENCY ANALYSIS PROFILE MOULD MAKER 431A (All unshaded skill sets must be demonstrated/completed) SKILL SETS SKILLS PROTECT SELF AND OTHERS Identify health and safety hazards in the workplace. Wear,
Revised April Unit/Standard Number. High School Graduation Years 2016, 2017 and 2018
Unit/Standard Number High School Graduation Years 2016, 2017 and 2018 Machine Tool Technology/Machinist CIP 48.0501 Task Grid Secondary Competency Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational
Machine Tool Technology/Machinist CIP Task Grid Secondary Competency Task List
1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 2 2 2 1 0.5 102 Identify & explain safety equipment and procedures.
Machine Tool Technology/Machinist CIP Task Grid
1 Secondary Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machoning industry. 102 Identify & explain safety equipment and
Machinist Level 4 Rev. December 12, 2012
Machinist Level 4 Machinist Unit: A14 Reconditioning Level: Four Duration: 12 hours Theory: Practical: 12 hours 0 hours Overview: This unit of instruction is designed to introduce knowledge of the procedures
Machine Tool Technology/Machinist CIP Task Grid
1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 102 Identify & explain safety equipment and procedures. 103 Identify
Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet
Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student
Machinist A Guide to Course Content
Machinist A Guide to Course Content Machinists work with metals; operate metal-cutting and shaping machinery. Training Requirements: To graduate from each level of the apprenticeship program, an apprentice
NOVA SCOTIA APPRENTICESHIP CURRICULUM STANDARD
NOVA SCOTIA APPRENTICESHIP CURRICULUM STANDARD for the Occupation of Based on the Interprovincial Program Guide (pg. 12 for Program Structure) Machinist New Levels 1, 2, 3 & 4 in September 2014 See Page
Entry Level Assessment Blueprint Precision Machining
Blueprint Precision Machining Test Code: 4152 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Organization and Shop Practices Demonstrate safe work habits and operating procedures
Computer Numerical Control (CNC) Machinist POA (2004) Subtask to Unit Comparison
Computer Numerical Control (CNC) Machinist POA (2004) Subtask to Unit Comparison NOA Subtask Task 1 Participates in workplace health and safety practices. 1.01 Maintains a safe workplace environment. 1.02
POS Perkins Statewide Articulation Agreement Documentation Coversheet
POS Perkins Statewide Articulation Agreement Documentation Coversheet Student Name: Secondary School Name: Secondary School Address: CTE Program of Study: CIP # CIP Program Name Grade 9 1. CAREER AND TECHNICAL
APPENDIX A TOOLMAKER D.O.T. CODE O*NET CODE As Revised for MACNY, The Manufacturers Association
STATE OF NEW YORK DEPARTMENT OF LABOR APPENDIX A TOOLMAKER D.O.T. CODE 601.280-042 O*NET CODE 51-4111.00 As Revised for MACNY, The Manufacturers Association This training outline is a minimum standard
JOB QUALIFICATION STANDARD (JQS)
Occupation: Work Process: Maintenance Mechanic Machine Shop Practical Hours: 250 hrs. JOB QUALIFICATION STANDARD (JQS) DOL Standard: Manual Machining Fundamentals: Apply a working knowledge of metal removal
Name: Machine Tool Technology ( )
Name: Machine Tool Technology (58.0501) Directions: Evaluate the student by checking the appropriate number to indicate the degree of competency. Rating Scale (0-6): 0 No Exposure no experience/knowledge
Interim Logbook TOOL & DIE MAKER
Interim Logbook TOOL & DIE MAKER Department of Advanced Education and Skills Apprenticeship and Trades Certification Division Note to Apprenticeship Applicants This form can only be used to record hours
Pennsylvania College of Technology One College Ave. Williamsport, PA Student ID Number:
Pennsylvania College of Technology One College Ave. Williamsport, PA. 17701-5799 Name: School: Student ID Number: Date: COMPETENCY ASSESSMENT FOR MACHINIST GENERAL (MG) MACHINE TOOL TECHNOLOGY (MY) AUTOMATED
Interprovincial Program Guide. Machinist. Human Resources and Skills Development Canada. Ressources humaines et Développement des compétences Canada
Interprovincial Program Guide 2012 Machinist Human Resources and Skills Development Canada Ressources humaines et Développement des compétences Canada Interprovincial Program Guide Machinist 2012 Trades
JOB QUALIFICATION STANDARD (JQS)
Occupation: Work Process: MACHINIST (CNC) CNC Setup Practical Hours: 2000 hrs. DOL Standard: CNC Setup: Apply a working knowledge in the setup of Computer Numerical Controls (CNC) machines that execute
CURRICULUM ASSESSMENT CHECKLIST
CURRICULUM ASSESSMENT CHECKLIST Machinist - Level 1 Apprenticeship Manitoba prescribes time and content specific curriculum standards for technical training in the trade of Machinist. To assist accreditation
Competency, knowledge and skill areas often offer varying definitions. For purposes of this toolkit, NIMS defines them in the following manner:
Toolkit Roadmap Title of report Credential name Narrative description of credential DEFINITION OF TERMS Competency, knowledge and skill areas often offer varying definitions. For purposes of this toolkit,
Turning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
Total Related Training Instruction (RTI) Hours: 144
Total Related Training (RTI) Hours: 144 Learning Unit Unit 1: Benchwork and Layout Layout tools Tapping Reaming Filing Engraving Stamping Unit 2: Cutting and Drilling Cutting Operations Drilling Operations
Machinist On-the-Job Training Guide
Machinist On-the-Job Training Guide Machinists work with metals and other materials and operate lathes, milling machines and other tools to produce shapes to a required finish and size. Training Requirements:
Typical Parts Made with These Processes
Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts
CURRICULUM ASSESSMENT CHECKLIST
CURRICULUM ASSESSMENT CHECKLIST Industrial Mechanic (Millwright) Level 1 Apprenticeship Manitoba prescribes time and content specific curriculum standards for technical training in the trades of Industrial
July 2001 Florida Department of Education CLUSTER CURRICULUM FRAMEWORK. Program Title: Machining Occupational Area: Industrial Education
July 2001 Florida Department of Education CLUSTER CURRICULUM FRAMEWORK Program Title: Machining Occupational Area: Industrial Education Components: One Core, Four Occupational Completion Points Secondary
Jig and Fixture Design. Chapter 1: Types and Functions of Jigs and Fixtures
Jig and Fixture Design Chapter 1: Types and Functions of Jigs and Fixtures Purpose of Tool Design Objectives: Provide simple, easy-to-operate tools for maximum efficiency Reduce manufacturing expenses
Hand Tools and Basic Layout
MCH-0100 Hand Tools and Basic Layout NOA Reference: The material covered satisfies in whole or in part, the requirements of National Occupational Analysis sub-tasks 1.08, 4.04, 4.05, 42.01-42.12. Description:
DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK ME6402 MANUFACTURING TECHNOLOGY II UNIT I PART A 1. List the various metal removal processes? 2. How chip formation occurs in metal cutting? 3. What is
MACHINIST TECHNICIAN - LATHE (582)
DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble, test products, and modify metal parts using machine shop and CNC processes in support of other manufacturing,
Tool and Die Maker Level 2
Level 2 B2 Read and Interpret Drawings II Duration: 32 hours 32 hours 0 hours This unit of instruction introduces the Tool and Die Maker Apprentice with the knowledge and skills necessary to read and interpret
ACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
Job Ready Assessment Blueprint. Precision Machining. Test Code: 4052 / Version: 01. Copyright All Rights Reserved.
Job Ready Assessment Blueprint Precision Machining Test Code: 4052 / Version: 01 Copyright 2009. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written
Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations, Boring, Reaming, Tapping)
1 Manufacturing Processes (2), IE-352 Ahmed M El-Sherbeeny, PhD Spring 2017 Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations,
no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
Various other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple
Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated
MACHINIST TECHNICIAN - LATHE (582)
DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble, test products, and modify metal parts using machine shop and CNC processes in support of other manufacturing,
Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
Trade of Toolmaking Module 2: Turning Unit 1: Machine Controls and Operations Phase 2
Trade of Toolmaking Module 2: Turning Unit 1: Machine Controls and Operations Phase 2 Published by SOLAS 2014 Unit 1 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction...
Machining I DESCRIPTION. EXAM INFORMATION Items
EXAM INFORMATION Items 50 Points 62 Prerequisites NONE Grade Level 10-12 Course Length ONE SEMESTER DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble,
VALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK ME6402 MANUFACTURING TECHNOLOGY II UNIT-I PART A 1. List the various metal removal processes? (BT1) 2. Explain how chip
SEMET19 Producing toolroom components using NC/CNC turning machines
Producing toolroom components using NC/CNC turning machines Overview This unit identifies the competences you need to prepare, set up and run numerically controlled (NC) turning machines, computer numerically
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES Articulation Agreement Identifier: _INT 153 (2005-1) Instruction version number (e.g.; INT 100 (2007-1)). Identifier is the postsecondary
Chapter 22 MACHINING OPERATIONS AND MACHINE TOOLS
Chapter 22 MACHINING OPERATIONS AND MACHINE TOOLS Turning and Related Operations Drilling and Related Operations Milling Machining Centers and Turning Centers Other Machining Operations High Speed Machining
Travis Bishop. Submitted to: Dr. John Davis. Date: 3 December Course: ETME 310 Section: 004. Lab Topic: Milling Project (Vise)
Travis Bishop Submitted to: Dr. John Davis Date: 3 December 2012 Course: ETME 310 Section: 004 Lab Topic: Milling Project (Vise) Introduction: Purpose of Experiment: This experiment was conducted to teach
March weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
TIMTOS 2017 EXHIBITS PROFILE
TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes
Chapter 23. Machining Processes Used to Produce Round Shapes: Turning and Hole Making
Chapter 23 Machining Processes Used to Produce Round Shapes: Turning and Hole Making R. Jerz 1 2/24/2006 Processes Turning (outside surface) straight, taper, facing, contour, form, cut-off, threading,
HSS Specialists. Special design high speed steel drills for special machining tasks
HSS Specialists Special design high speed steel drills for special machining tasks Guhring s HSS Guhring has been a specialist in drilling tools for more than a century. This not only applies to the broad
Materials Removal Processes (Machining)
Chapter Six Materials Removal Processes (Machining) 6.1 Theory of Material Removal Processes 6.1.1 Machining Definition Machining is a manufacturing process in which a cutting tool is used to remove excess
Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering
Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering LABORATORY MANUAL For the students of Department of Mechanical and Production Engineering 1 st
Strands & Standards MACHINING 2
Strands & Standards MACHINING 2 COURSE DESCRIPTION This course is the second in a sequence that will use technical knowledge and skills to plan and manufacture projects using machine lathes, mills, drill
Cross Peen Hammer. Introduction. Lesson Objectives. Assumptions
Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization
Course Title: Advanced Manufacturing Technology MACH 110 Instructor: Conrad Mercurius Contact Information: Conrad.Mercurius@raritanval.edu Course Meeting Dates, Days, and Times: Total # hours: 250 Course
Big Sandy Community and Technical College. Course Syllabus
Big Sandy Community and Technical College Course Syllabus PS Number: 81212 Semester: Spring Year: 2017 Faculty Name: Charles K. Moore Title: Associate Professor Course Prefix and Number: IMT-116 Course
International Journal of Science and Engineering Research (IJ0SER), Vol 3 Issue 3 March , (P) X
Design And Optimization Techniques Using In Turning Fixture M Rajmohan 1, K S Sakthivel 1, S Sanjay 1, A Santhosh 1, P Satheesh 2 1 ( UG Student ) 2 (Assistant professor)mechanical Department, Jay Shriram
Lecture 18. Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing
Lecture 18 Chapter 24 Milling, Sawing, and Filing; Gear Manufacturing (cont.) Planing For production of: Flat surfaces Grooves Notches Performed on long (on average 10 m) workpieces Workpiece moves / Tool
Other Lathe Operations
Chapter 15 Other Lathe Operations LEARNING OBJECTIVES After studying this chapter, students will be able to: Safely set up and operate a lathe using various work-holding devices. Properly set up steady
MACHINE TOOLS LAB LABORATORY MANUAL
Vanjari Seethaiah Memorial Engineering College Patancheru, Medak MACHINE TOOLS LAB LABORATORY MANUAL Department of Mechanical Engineering PREFACE Industrial Revolution has given man a lot many luxuries,
MACHINE TOOLS; METAL-WORKING NOT OTHERWISE PROVIDED FOR
XXXX B23 MACHINE TOOLS; METAL-WORKING NOT OTHERWISE PROVIDED FOR XXXX PLANING; SLOTTING; SHEARING; BROACHING; SAWING; FILING; SCRAPING; LIKE OPERATIONS FOR WORKING METAL BY REMOVING MATERIAL, NOT OTHERWISE
COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004
1 COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004 I. OBJECTIVE To provide an overview and basic knowledge of the
Preparing and using CNC Machining Centres F/508/4727
Unit Title Ofqual unit reference number (code) Organisation Reference Preparing and using CNC Machining Centres F/508/4727 QU051501 Unit Level Level 2 Unit Sub Level None GLH 64 Unit Credit Value 14 Sector
Lathes. CADD SPHERE Place for innovation Introduction
Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to
Dr Ghassan Al-Kindi - MECH2118 Lecture 9
Dr Ghassan Al-Kindi - MECH2118 Lecture 9 Machining A material removal process in which a sharp cutting tool is used to mechanically cut away material so that the desired part geometry remains Most common
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level II NIMS/ANSI
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level II NIMS/ANSI 101-2001 Developed By: Copyright July 1997-Revised September 2001 Distributed by: The National
Machining components using vertical boring machines
Unit 319 Machining components using vertical boring machines UAN: Level: 3 Credit value: 77 GLH: 161 Relationship to NOS: Assessment requirements specified by a sector or regulatory body: Aim: Y/600/5430
Trade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2
Trade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2 Published by SOLAS 2014 Unit 3 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction... 4
Machining components using centre lathes
Unit 305 Machining components using centre lathes UAN: Level: 3 Credit value: 77 GLH: 161 Relationship to NOS: Assessment requirements specified by a sector or regulatory body: Aim: A/600/5386 This unit
SEMMME3-056 Setting single and multi-spindle drilling machines for production
Setting single and multi-spindle drilling machines for production Overview This unit identifies the competences you need to prepare and set up single and multi-spindle drilling machines and associated
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 121 - MANUFACTURING PROCESSES I Prepared By: Daniel Miller Updated By: Daniel Miller (April 2015) CANINO SCHOOL OF
Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
TOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
Projects. 5 For each component, produce a drawing showing the intersection BO.O. C'BORE 18 DIA x 5 DEEP FROM SECTION ON A - A
Projects ~ Figure Pl Project 1 If you have worked systematically through the assignments in this workbook, you should now be able to tackle the following milling and turning projects. It is suggested that
AMETAL SHAPER is indispensable for certain METAL SHAPER FOR YOUR SHOP. By S. S. Miner
METAL SHAPER FOR YOUR SHOP By S. S. Miner AMETAL SHAPER is indispensable for certain machining operations where flat surfaces must be produced within very close limits, such as machining flats on castings,
Introduction to Machining: Lathe Operation
Introduction to Machining: Lathe Operation Lathe Operation Lathe The purpose of a lathe is to rotate a part against a tool whose position it controls. It is useful for fabricating parts and/or features
Manufacturing Processes (continued)
Manufacturing (continued) Machining Some other processes Material compatibilities Process (shape) capabilities Manufacturing costs Correct pg 142, question 34i should read Fig 6.18 question 34j should
Build a Drill Press Vise
Youth Explore Trades Skills Introduction This activity plan will develop the student s machining and metalworking skills as they fabricate a multi-piece steel vise. The project will encompass basic lathe
MANUFACTURING PROCESSES
1 MANUFACTURING PROCESSES - AMEM 201 Lecture 5: Milling Processes DR. SOTIRIS L. OMIROU Milling Machining - Definition Milling machining is one of the very common manufacturing processes used in machinery
UNIT 4: (iii) Illustrate the general kinematic system of drilling machine and explain its working principle
UNIT 4: Drilling machines: Classification, constructional features, drilling & related operations, types of drill & drill bit nomenclature, drill materials. Instructional Objectives At the end of this
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO Sault College COURSE OUTLINE COURSE TITLE: CODE NO. : SEMESTER: 2 PROGRAM: AVIATION MACHINING AUTHOR: ROBERT ZUCCATO TIM CANDIDO Bob.zuccato@saultc.on.ca
CNC Cooltool - Milling Machine
CNC Cooltool - Milling Machine Module 1: Introduction to CNC Machining 1 Prepared By: Tareq Al Sawafta Module Objectives: 1. Define machining. 2. Know the milling machine parts 3. Understand safety rules
National Occupational Analysis. Tool and Die Maker 2014
National Occupational Analysis Tool and Die Maker 2014 Occupational Analyses Series Tool and Die Maker 2014 Trades and Apprenticeship Division Workplace Partnerships Directorate National Occupational Classification:
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level III NIMS/ANSI
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level III NIMS/ANSI 101-2001 Developed By: Copyright July 1997-Revised September 2001 Distributed by: The
Design for machining
Multiple choice questions Design for machining 1) Which one of the following process is not a machining process? A) Planing B) Boring C) Turning D) Forging 2) The angle made between the rake face of a
Setting vertical boring machines for production
Unit 318 Setting vertical boring machines for production UAN: Level: 3 Credit value: 91 GLH: 210 Relationship to NOS: Assessment requirements specified by a sector or regulatory body: Aim: F/600/5423 This
Tech 046: Machine Operation and Management. Course Syllabus
SAN JOSE STATE UNIVERSITY Department of Aviation and Technology Tech 046: Machine Operation and Management Course Syllabus Semester and Year: Fall, 2013 Course Sections: 1 & 11 Course Code: S1: 43304 Class
Copyright 2010 Society of Manufacturing Engineers. FUNDAMENTAL MANUFACTURING PROCESSES Holemaking - HO
FUNDAMENTAL MANUFACTURING PROCESSES Holemaking - HO SCENE 1. HO78A, CGS: Hole Finishing Operations white text, centered on background FMP BKG, motion background SCENE 2. HO79A, SME2519, 02:26:30:00-02:26:42:00
061 MECHANICAL ENGINEERING CRAFT PRACTICE
061 MECHANICAL ENGINEERING CRAFT PRACTICE EXAMINATION STRUCTURE The examination for this syllabus wills cover the underlisted two major areas of groupings and 193 Building/Engineering Drawing as the related
SEMAE3218 Setting CNC turning machines for production of aircraft components
Setting CNC turning machines for production of aircraft components Overview This standard identifies the competences you need to prepare and set up Computer Numerical Control (CNC) machines or CNC machining
Syllabus: Basic Manual Machining
Syllabus: Basic Manual Machining Subject Code: 172302 Course Number: GM9006 CIP Code: 48.0501 SOC Code: 51-4041 C-TEC of Licking County 150 Price Road Newark, Ohio 43055 Instructor: Bob Bronkar Instructor
Total Related Training Instruction (RTI) Hours: 144
Total Related Training (RTI) Hours: 144 Learning Unit Unit 1: Specialized CNC Controls Fanuc Haas Mazak Unit : CNC Programming Creating a CNC Program Calculation for Programming Canned Cycles Unit : CNC
Preparing and using CNC machining centres
Unit 017 Preparing and using CNC machining centres Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover
Summer Junior Fellowship Experience at LUMS. Maliha Manzoor 13 June 15 July, 2011 LUMS Summer Internship
Summer Junior Fellowship Experience at LUMS Maliha Manzoor 13 June 15 July, 2011 LUMS Summer Internship Internship Schedule June 13-17: 2D and 3D drawings in AutoCAD June 20-24: 2D and 3D drawings in AutoCAD
Duties and Standards. for. Screw Machining--Level III
Duties and Standards for Screw Machining--Level III Single-and Multiple-Spindle Automatic Bar and Chucking Machines Approved by The National Institute for Metalworking Skills, Inc. October 1996 Prepared
Workshop Practice (ME192)
Workshop Practice (ME192) Credits: 3 Contacts: Mail: poddar05@gmail.com Web: http://www.ajourneywithtime.weebly.com Exp 03: To make a pin as given profile from a φ20 mm mild steel rod in a lathe. Material