Having the highest regards for a fore mentioned institution and with my
|
|
- Moris Morris
- 5 years ago
- Views:
Transcription
1 Dear Sir, Having the highest regards for a fore mentioned institution and with my sincere aspiration to obtain a working position and earn a living, I humbly seek in your good office for a working position that speaks my qualification. I am a Diploma holder in Civil Eng. From THE KERALA Technical Institute. I came to know that your good office is in need of Engineering, Auto cad designer. I have developed my skills and all in the field of Architectural drawings. I am also a computer Literature. I believe that the hands-on experience I will be of particular interest to you. I hope that you can use someone with my particular background skills and abilities. It is indeed a great honor for me to apply in your respected institution and I do hope that my qualification merits your preferential action. I shall be ever grateful to you whatever consideration and favorable action extended to me regarding this application. Thank you so much and more power... Very Truly Yours, JUSTIN JOSE Page 1 of 6
2 JUSTIN JOSE jstnjs@gmail.com Mob : (dubai). Curriculum Vitae POST APPLIED FACADE DESIGNER. CAREER OBJECTIVE To pursue the career as a Façade Designer, which is challenging, responsible and affords the opportunity of utilizing and further enhancing my job knowledge, experience, leadership, communication skills and computer expertise. PROFFESSIONAL EXPERIENCE Accumulated experience of 4 years in designing and drafting, of which 2 years in the field of facade engineering April to 2013 May 11 : Designer in ALU-TEC(Aluminum Technology Auxiliary Industries W.L.L) Doha,Qatar September to 2012 March : Site Engineer in ALTECH Aluminium- Thrissur, Kerala, India June to 2011 September : Draughtsman in OZONE Builders at Ottappalam Kerala, India. DUTIES AND RESPONSIBLITIES Designing & preparing drawing for steel, Aluminium & Glazing works Preparing proposal drawings as per project requirements. Preparing production shop drawings. A) Preparing drawings based on approved Architectural drawings. B) Drawings will be prepared based on door, window & curtain wall schedule And elevation Page 2 of 6
3 C) Providing profile or sectional details of doors windows and curtain walls (Conventional,2 Way & 4 Way). D) Providing cutting list and details of materials to be used (for curtain wall, Doors, windows, sliding windows etc.) E) Preparing drawings by considering of optimum utilization of materials, Machine & Men. F) Preparation of material order from architectural or shop drawings. G) Coordination between site & factory for delivery of fabricated items in time as per. priority. Material Estimation A) Providing estimating details of the project based on requirements. B) Quantity surveying for Estimation and for material order. Checking all drawings and making review before submitting. Coordinating with dept. head and consultants (via Project management) for any quarries. Coordinating with estimation dept. for preparing shop drawings. Coordinating with production dept. for drawing implementations and if any changes Updating immediately for further fabrication of materials. Collecting measurement from site to achieve accuracy, feasibility of materials and design. Prepare the submittals to submit to main contractor and be sure all material must be complying with project specification. MAJOR PROJECTS INVOLVED 1. Aspire Fitness Center, Doha-Qatar (external steel structure, curtain wall, Alum. Claddingcost 10 million QR) 2. Mamoura Police Station, Doha-Qatar (alum cladding- cost 1 million QR) 3. La Plage Villas, Doha-Qatar (fixed and sliding doors and windows,alum.cladding) 4. Hilton Hotel, Doha-Qatar (Alum Cladding, As built Drawing) 5. New Doha Int. Airport Car Rental Facility, Doha-Qatar (Shop drawing-curtain Wall, cost 30 million QR) 6. Jassimya Tower, Doha-Qatar (Curtain wall and windows- cost 9 million QR) Page 3 of 6
4 TECHNICAL QUALIFICATION Diploma in Civil Engineering The kerala Technical Institute - Thrissur, Kerala, India Draughtsman Civil Ramavarma Institute Of Civil Engineering- Thrissur, Kerala, India COMPUTER KNOWLEDGE AutoCAD 2d 2011 certified associate 3D STUDIO MAX SKECH UP, AFTER EFFECTS. MS-OFFICE PERSONAL DETAIL Name : JUSTIN JOSE Marital Status : Single. Nationality : Indian Date of Birth : REFERENCES Two Non-Related Reference Shall Be Given Upon Request. I do hereby certify that the above particulars are true and correct for the best of my knowledge JUSTIN JOSE Page 4 of 6
5 CURRENT PROJECT: ASPIRE FITNESS CENTER-DOHA (QATAR) EXTERNAL STEEL STRUCTURE ACP AND GLASS FINISHING 3D EXTERIOR Page 5 of 6
6 JASSIMYA TOWER,DOHA HILTON HOTEL,DOHA Page 6 of 6
AKBAR BASHA Mobile: , Doha Qatar.
AKBAR BASHA Mobile:+97470631440, 97470070843. Doha Qatar. safialbaha@gmail.com safiakbar2007@yhoo.co.in CAREER SUMMARY A qualified Civil Engineer Professional having Total-13 years of experience in Qatar,
More informationWHO WE ARE. Our Client base. - USA - Canada - Hawaii. - Australia - New Zealand - UAE. - UK - Netherlands - Oman. - Singapore - Norway - Qatar
WHO WE ARE We help construction companies, general contractors, architects & engineers to seamlessly integrate BIM into their projects within their predefined timelines, standards and budget thereby helping
More informationSr.MECHANICAL DRAFTSMAN (MEP) - RESUME
Sr.MECHANICAL DRAFTSMAN (MEP) - RESUME A.C.ANBUSELVAN Mobile No.: +974 33261821 #30A MALAYAPPAN SALAI, Email: sivaselvan_2002@yahoo.com KAMARAJ COLONY, THURAIYUR-621010, TRICHY (DT). TAMILNADU-INDIA. Professional
More informationB. Bidders shall acknowledge receipt of this Addendum in writing on his Proposal Form.
McKee and Associates Architecture and Interior Design Addendum No. THREE Date: 12.11.17 Project: A NEW BUILDING FOR THE GREATER LIMESTONE COUNTY CHAMBER OF COMMERCE ATHENS, ALABAMA A3.1 GENERAL PROJECT
More informationBIM Services India An Architectural & Engineering Company
BIM Services India An Architectural & Engineering Company Offices Our Spread USA UK Office India Office Canada Office Australia Office JBH-Tesla Design Group, Inc. 100 Executive Boulevard-Suite #204, Ossining,
More informationDrafting & Design Technology
131 Location: Library Tower - 2nd Floor Program Information Every new structure or machine starts out as the idea of a designer or an engineer. It is only through the knowledge and ability of highly skilled
More informationToll-Free
Primary applications for Ross DS Series Security Doors and Frames include government, industrial, commercial and residential properties where protection of people and property is of utmost concern and
More informationSECTION WOOD AND PLASTIC DOORS. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.
SECTION 081416 PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. B. Examine all conditions as they exist at the project prior to submitting
More informationSECTION WOOD DOORS
SECTION 08211 WOOD DOORS Notice to Vendors: CANV prefers to purchase products that contain tropical wood only if they are certified according to the guidelines of the Forest Stewardship Council (FSC).
More informationCURRICULUM VITAE of ANTHONY HOUGHTON S.C.
CURRICULUM VITAE of ANTHONY HOUGHTON S.C. BARRISTER - AT - LAW of DES VOEUX CHAMBERS CHARTERED ARBITRATOR CHARTERED QUANTITY SURVEYOR (NON PRACTISING) Arbitration / ADR Outside court litigation Mr. Houghton
More informationExcellence in Engineering Solutions
Excellence in Engineering Solutions The next level of engineering performance Apex Knowledge Technology MEP Services Overview About Apex Knowledge Technology Apex Knowledge Technology (AKT) is a subsidiary
More informationFrom. X.Antony Caston No,23 Anthoniyar Kovil Street, Beemanagar, Trichy The Manager, Sub : Application for the post of Tekla Modeler
From To X.Antony Caston No,23 Anthoniyar Kovil Street, Beemanagar, Trichy 620001. The Manager, Sub : Application for the post of Tekla Modeler Respected Sir, I wish to introduce myself as X.Antony Caston,
More informationMEC-D-E-2004 Mechanical Engineer PERSONAL DATA EDUCATION LANGUAGES COMPUTER SKILLS TRAINING COURSES AND CERTIFICATIONS
103020-MEC-D-E-2004 Mechanical Engineer Holds a B. Sc. in Mechanical Production / Design Engineering and has about 12 years hands-on experience in Mechanical Production / Manufacturing / Automation / CNC
More informationOUR CLIENT BASE. Canada Norway. UAE Singapore. Germany. Netherlands USA. Hawaii. Australia. Qatar Oman. Belgium. New Zealand.
WHOWE ARE We help construction companies, general contractors, architects & engineers, integrate BIM into their projects seamlessly within their predefined timelines and budget, bridging the gap between
More informationBUILDING PLANS. BUILDING INSPECTIONS DEPARTMENT
BUILDING PLANS BUILDING INSPECTIONS DEPARTMENT 507-537-6773 www.ci.marshall.mn.us This handout is intended only as a guide to the subject matter covered herein and is based in part on the 2015 Minnesota
More informationProven precast solutions for every application
Proven precast solutions for every application Seventy five years of UNDISPUTED LEADERSHIP HP shell roof, bowstring girders and trussed gantry girders for L&T Bengaluru Works Larsen & Toubro is a major
More informationThis Call for Qualifications does not require the preparation of a design proposal.
EDMS# 211137 I. Introduction This Call for Qualifications invites professional artists, or artist team, to participate in a two-stage selection process to develop an original, public art work for Port
More informationCertificate. Estimated Program Length & Cost *
159 The College for Real Careers (DDT) Program Information Average Full-Time Wage Every new structure or machine starts out as the idea of a designer or an engineer. It is only through the knowledge and
More informationA. Interior and exterior non-illuminated tactile building signs including Braille.
ADVANCE CORPORATION BRAILLE-TAC TM DIVISION 8200-97th Street South Cottage Grove, MN 55016 (651) 771-9297 (800) 328-9451 Fax: (651) 771-2121 E-mail: brailletac@advancecorp.com Web: www.advancecorp.com
More informationContent Map For Career & Technology
Content Strand: Applied Academics CT-DD1-1 CT-DD2-1 CT-DD3-1 CT-DD4-1 Use math concepts in Use math concepts in Use math concepts in Use math concepts in design and engineering design and engineering design
More informationSECTION 10520: FIRE EXTINGUISHERS AND CABINETS
SECTION 10520: FIRE EXTINGUISHERS AND CABINETS PART 1 GENERAL 1.01 GENERAL REQUIREMENTS: A. This section specifies fire extinguishers, cabinets for fire extinguishers, fire and other accessories. Their
More informationCan you please issue the most recent Soils Report as prepared by Strata? Updated Soils Report to be posted to Christenson Corporation web site
CCH ioneer anor Skilled Nursing Facility Questions June, 0 A-Wyoming Can you please issue the most recent Soils Report as prepared by Strata? Updated Soils Report to be posted to Christenson Corporation
More informationIREDALE GROUP A R C H I T E C T U R E
Client Seal Consultant Drawing Title Scale Drawn Check Project No. Phase No. Check Sheet No. 3 4 VILLA 2 ROOF 138' - 0" 1 Aug 10 Development Permit No. Date Revision This computer generated drawing is
More informationThe GMFI Process. Design Intent Document Preparation. Enroll in GMFI Program. Image Consultation. You are here. Design Intent Document.
Enroll in GMFI Program Image Consultation Design Intent Document Preparation Preliminary Drawings Final Drawings Design Intent Document You are here. 1-2 Construction Documents Services performed by dealer
More informationSECTION HOLLOW METAL DOORS AND FRAMES
PART 1 GENERAL 1.01 SECTION INCLUDES SECTION 08 11 13 HOLLOW METAL DOORS AND A. Non-fire-rated hollow metal doors and frames. B. Hollow metal frames for wood doors. C. Fire-rated hollow metal doors and
More informationProduct Guide Specification
Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat,
More informationBovard Studios Inc. Section April 6, 2004 Page 1
April 6, 2004 Page 1 This section includes solid flush and surface articulated wood doors, may have veneer facing, solid or glazed (stained glass) design, factory pre-fit, may be factory finished or site
More informationFIT-OUT PERMIT REQUEST (GENERAL WORKS)
Dubai Maritime City P.O. Box 8988 Dubai, UAE T +97143450626 F +97143450116 www.dubaimaritimecity.com FIT-OUT PERMIT REQUEST (GENERAL WORKS) PROJECT DETAILS Project Name: Plot Number: TENANT DETAILS Contact
More informationTCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II
SECTION 013300 - SUBMITTAL PROCEDURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification
More informationSECTION SUBMITTAL PROCEDURES
SECTION 013300 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification Sections, apply
More informationSECTION Display Case Door Series 1301-CM
1 SECTION 12 3559 Display Case Door Series 1301-CM PART 1 - GENERAL 1.01 SUMMARY A. This section includes: 1. Display Case Glass Doors. 2. Sidelites. B. Related work in other sections: 1. 08 8000- Glazing
More informationJEFFERSON LAB TECHNICAL ENGINEERING & DEVELOPMENT FACILITY (TEDF ONE) Newport News, Virginia
BULLETIN NO. 6 TO THE PLANS AND SPECIFICATIONS FOR JEFFERSON LAB TECHNICAL ENGINEERING & DEVELOPMENT FACILITY (TEDF ONE) Newport News, Virginia EwingCole Architects.Engineers.Interior Designers.Planners
More informationMerrick Pet Care New Distribution Center Hereford, Texas
Merrick Pet Care New Distribution Center Hereford, Texas DATE: March 16, 2015 ARCHITECTURAL/ELECTRICAL ADDENDUM #6 FROM: TO: PROJECT: Lavin Associates, Architects Plan Holders of Record Merrick Pet Care,
More informationBuilding Construction Details Practical Drawings Pdf
Building Construction Details Practical Drawings Pdf This pioneering textbook details how construction drawings are used to implement Understanding Construction Drawings for Housing and Small Buildings
More informationArchitectural Floor Plan Symbols
Architectural Floor Plan Symbols The symbols below are used in architectural floor plans. Every office has their own standard, but most symbols should be similar to those shown on this page. Building Section
More informationSECTION BULLET- RESISTANT DOORS
1 SECTION 08 3950 BULLET- RESISTANT DOORS PART 1- GENERAL 1.01 SUMMARY A. This Section Includes: 1. Bullet- resistant steel door and frame systems. 2. Door hardware for bullet- resistant steel door and
More informationAdvanced Computer Aided Design COURSE OUTLINE
Advanced Computer Aided Design COURSE OUTLINE 1. Course Title: Advanced Computer Aided Design 2. CBEDS Title: Computer Aided Drafting/Design 3. CBEDS Number: 5705 4. Job Titles: Framers Construction Inspectors
More informationPacific West LLC! " Working Journal CMT Practicum
Pacific West LLC! " Working Journal CMT 4890- Practicum Profile! " Pacific West LLC Construction, Environmental & Recycling Our Major Clients Locations Salt Lake City Office 1515 W. 2200 S. suite C. Salt
More informationBUILDING PLANS. BUILDING DEPARTMENT
BUILDING PLANS BUILDING DEPARTMENT 952-446-1660 www.cityofminnetrista.com This handout is intended only as a guide and is based in part on the 2015 Minnesota Residential Code, Minnetrista City ordinances,
More informationVacancies In Danat Qatar In The Field of Wood And Furniture industry
Vacancies In Danat Qatar In The Field of Wood And Furniture industry Sl No. Job Title Vacancy Qualifications/Requirements Salary Package 1. Carpenter 80 Male at least 28 years of age With minimum of 5
More informationAPPLICATION FORM FOR INFRASTRUCTURE NOC
APPLICATION FORM FOR INFRASTRUCTURE NOC Submission Type New Resubmission (Previous Reference No): Arch. Str. HVAC EHS Others Revision /Amendment (Infrastructure NOC Reference No): Arch. Str. HVAC EHS Others
More informationConstruction Guidelines 1
Construction Guidelines 1 Addendum Log November, 2014 Full Update March, 2015 Formatting July, 2015 Editing November, 2016 Full Update February, 2017 Complete Overhaul Signage Criteria 2 Table of Contents
More informationMTJ Outdoor Baggage Claim
MTJ Outdoor Baggage Claim 915 S. Tenth St. Montrose, CO 8101 p: (970) 29-1980 f: (970) 797-6811 www.motleyarc.com Drawings and Dimensions 1. ATTENTION ALL USERS OF THESE DRAWINGS, GENERAL CONTRACTORS,
More informationVanderbilt University Standard Specification Revised 2/6/08
SECTION 01 78 23 OPERATION AND MAINTENANCE DATA PART 1 GENERAL 1.01 RELATED SECTIONS A. Section 01 77 00 Closeout Procedures B. Section 01 78 39 Project Record Documents 1.02 SUMMARY A. This section provides
More informationDrafting/CAD. 230 Drafting/CAD. Faculty and Offices. Certificates and Degrees Awarded. Certificate of Achievement Requirements: Drafting/CAD
230 Drafting/CAD Drafting/CAD The 21st century is witnessing a rapid growth in science, engineering and technology. This will require society to read, write and draw the language of technology drafting.
More informationSECTION WIREWAYS FOR RADIOLOGY EQUIPMENT
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 26 05 36 WIREWAYS FOR RADIOLOGY EQUIPMENT SPEC WRITER NOTE: Delete between //----// if not applicable to project. Also, delete any other item or paragraph not applicable
More informationSPECIAL DOORS & FIRE DOORS
COMPLETE HIGH QUALITY SOLUTIONS SPECIAL DOORS & FIRE DOORS May 2016 Q U A L I T Y PERFORMANCE AT AN AFFORDABLE PRICE Syro Industry takes the problems out of door specification. Simply let us know your
More informationISO 9001: :2004 OHSAS 18001:2007. Civil Construction Precast Concrete & Hollow core Factories Readymix Concrete Plants Earthwork & Blasting
ISO 9001:2008 14001:2004 OHSAS 18001:2007 Civil Construction Precast Concrete & Hollow core Factories Readymix Concrete Plants Earthwork & Blasting MEP Grade A, Kahramaa approved EPC contractor Steel Cut
More informationARCHITECTURE CADD Course Syllabus
6111 E. Skelly Drive P. O. Box 477200 Tulsa, OK 74147-7200 ARCHITECTURE CADD Course Syllabus Course Number: TTC-0880 OHLAP Credit: Yes OCAS Code: 8903 Course Length: 120 Hours Career Cluster: Manufacturing
More information*********************************************************************************************************
10400 IDENTIFYING DEVICES ********************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 10 14 00 *********************************************************************************************************
More informationKent Metal Products Vanguard Road Richmond, British Columbia, Canada. V6X 2P KentMetalProducts.com
Kent Metal Products Formed Sheet Metal Channels Formed Stairs made from Aluminum Plate Formed & Welded Screens Formed & Welded Pipe Guards Crated Glass Frames for Export to USA Bike Racks Cut, Formed &
More informationSC Railing Process. What To Expect
SC Railing Process What To Expect What To Expect We have the expertise to produce superior and advanced railing designs tailored to each project s unique requirements. Submit New Project Project Completion
More informationModern Techno Engineers
+91-8071803764 Modern Techno Engineers https://www.indiamart.com/moderntechnoengineers/pdf1.html Established in the year 2007, Modern Techno Engineers represents leading Wholesale Trader of UPVC Window
More informationTurning the wheels of your success
INDUSTRIAL SERVICES Turning the wheels of your success A comprehensive package of integrated services combining traditional certification and inspection with innovative business solutions based on the
More informationDepartment of Architectural Technology Spring 2018
Department of Architectural Technology Spring 2018 ARCH 2431 BUILDING TECHNOLOGY III 1 lecture hours and 6 lab/studio hours, 4 credits Course Description: Course focus is on steel construction. This course
More informationGuide Specification Section Interior Suspended Sliding Glass Doors
Guide Specification Section 08 32 13 Interior Suspended Sliding Glass Doors SECTION 08 32 13 The Sliding Door Company s product combines operable sliding glass doors with stationary glazed panels to create
More informationSECTION PRE-MANUFACTURED CABINETS
SECTION 12390 PRE-MANUFACTURED PART 1 GENERAL 1.1 DESCRIPTION OF WORK A. The work includes furnishing all labor, materials and equipment required to complete the Pre-Manufactured Cabinet work as shown
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-08 33 13 (May 2009) Change 2-11/12 --------------------------- Preparing Activity: USACE Nontechnical Title Revision (August 2015) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationModel Curriculum. Draughtsman SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL:
SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: Model Curriculum Construction Real Estate and Infrastructure Construction Draughting CON/Q1301 4 2 TABLE OF CONTENTS 1. Curriculum 04 2. Trainer Prerequisites
More informationSECTION SUBMITTAL PROCEDURES
SECTION 01330 - SUBMITTAL PROCEDURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 1 Specification
More informationAttached is Addendum No. 2 to SEPTA Sealed Bid APES, Install DC Stinger Distribution System - SEPTA Fern Rock Car House.
Dear Sir/Madam: Attached is Addendum No. 2 to SEPTA Sealed Bid 17-00222-APES, Install DC Stinger Distribution System - SEPTA Fern Rock Car House. The Bid due date and time is changed from Thursday, Nov.
More informationP O S T E R C A S E S D I S P L A Y C A S E S M E S S A G E B O A R D S E X H I B I T C A S E S D I R E C T O R I E S W W W. P O B L O C K I.
SPECIALTY DISPLAY CATALOG P O S T E R C A S E S D I S P L A Y C A S E S M E S S A G E B O A R D S E X H I B I T C A S E S D I R E C T O R I E S W W W. P O B L O C K I. C O M W H AT C A N W E D O? I T S
More informationSECTION SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES
SECTION 01 33 23 - SHOP DRAWINGS, PRODUCT DATA, AND PART 1 - GENERAL 1.1 SUMMARY A. Products include, but are not limited to, the following construction submittals: 1. Shop Drawings. 2. Product Data. 3.
More informationGRICE-TRIVERS JOINT VENTURE ARCHITECTS PAGE 1 PROJECT NO
PAGE PROJECT NO. 0-0 0 0 0 0 0 DATE: PROJECT: GATEWAY STEM ATHLETICE FIELD ALTERATIONS GATEWAY STEM HIGH SCHOOL - ST. LOUIS PUBLIC SCHOOLS 0 MCRTEE AVENUE ST. LOUIS, MISSOURI 0 TO BID DOCUMENTS DATED DECEMBER,
More informationSeries 6000 Vinyl Horizontal Slider
Series 6000 Horizontal Slider Series 6000 Vinyl Horizontal Slider Contents List of Architectural Drawings...6000HS - 3 Elevations - XO or OX...6000HS - 4 Available Sizes - XO or OX...6000HS - 5 Elevations
More informationComputer-Aided Drafting and Design Technology, A.A.S.
Johnson County Community College 1 Computer-Aided Drafting and Design Technology, A.A.S. Drafting technicians are engineering communication specialists who apply mathematics, computer applications and
More informationINDEX OF SPECIFICATIONS SECTION F SPECIAL CONDITIONS DIVISION 1 - GENERAL REQUIREMENTS:
INDEX OF SPECIFICATIONS SECTION F SPECIAL CONDITIONS DIVISION 1 - GENERAL REQUIREMENTS: 013300 SUBMITTAL PROCEDURES 018116 CONSTRUCTION WASTE MANAGEMENT DIVISION 2 EXISTING CONDITIONS: 023000 EARTHWORK
More informationSCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
More informationCONTENTS TABLE OF. Introduction. Company Details. Organization Chart. Certificates & Insurances. Our Products. List of machineries and Equipment
TABLE OF CONTENTS Introduction... 01 Company Details... 02 Organization Chart... 04 Certificates & Insurances... 05 Our Products... 10 List of machineries and Equipment... 31 Other Companies of Group...
More informationMEDICI ARTIST LOFTS. An affordable housing project by DFA dev. Artifex West Studio. 34 units - 7ea 3 bed, 17ea 2 bed & 10ea 1 bed
MEDICI ARTIST LOFTS An affordable housing project by DFA dev. 34 units - 7ea 3 bed, 7ea bed & 0ea bed The proposed, 34 unit, affordable housing and et rate project is located at the intersection of N Sutter
More informationSeries 9000 Vinyl Fixed Window
Series 2030 Picture Window Series 9000 Vinyl Fixed Window Contents List of Architectural Drawings... 9000PW - 3 Elevations - 9000 Fixed... 9000PW - 4 Available Sizes - 9000 Fixed... 9000PW - 5 Elevations,
More informationA. Action Submittals: Written and graphic information that requires Architect's responsive action.
SECTION 01330 - SUBMITTAL PROCEDURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 1 Specification
More informationIN WOOD s.a.r.l. IN WOOD s.a.r.l. Wood and metal work
Wood and metal work July 25, 2011 Table of Contents 1. About us 2. Ownership 3. Mission & Performance 4. Organization chart 5. Our services 6. Our portfolio 7. IN WOOD Factory 8. IN WOOD Team 9. IN WOOD
More informationA M B U L A N C E S O L U T I O N S P R O F I L E
A M B U L A N C E S O L U T I O N S P R O F I L E Auto Commercial International GTD FZCO Dubai United Arab Emirates Automotive Spare Parts & Accessories Genuine OEM After Market 4x4 Vehicles Civilian Vehicles
More informationFAST TRACK WORKSHOP OBJECTIVES
1 FAST TRACKING FAST TRACK WORKSHOP OBJECTIVES TO UNDERSTAND: 1. WHY ARE CRITICAL PATH ( FAST TRACK ) DESIGN SUBMITTAL PACKAGES ALLOWED 2. WHEN IS FAST TRACK ALLOWED 3. WHEN IS THE CONTRACTOR ALLOWED TO
More informationMondrian CWA-20 Updated April 2018 Product Information Sheet
Glass Single or double glazed Glass thickness up to 21mm Available on request Low Iron Glass, Low Maintenance Coatings, Solar Control Coatings, IQ Heated Glass, Privacy Glass, Coloured/ Decorative Interlayer,
More informationCertificate by the Architect: Certified that no addition and deletion has been made to the tender documents downloaded from the IIT Madras web site.
INDIAN INSTITUTE OF TECHNOLOGY MADRAS ENGINEERING UNIT CHENNAI 600 036 NOTICE INVITING TENDERS FOR APPOINTMENT OF ARCHITECTURAL CONSULTANT No: 35/ ARC / 2013 14 TECHNICAL BID COVER 2 NAME OF WORK: Providing
More information1010 Sliding Mall Front
JUNE, 2018 FEATURES 1 Features Screw spline fabrication 1/4" and 1" glazing Permanodic TM anodized finishes in seven standard choices Painted finishes in forty-two standard choices and unlimited custom
More informationChevy Chase Club June 30, 2008 Bowie Gridley Architects
SECTION 081433 - STILE AND RAIL WOOD DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSeries 9000 Vinyl Fixed Window
Series 2030 Picture Window Series 9000 Vinyl Fixed Window Contents List of Architectural Drawings... 9000PW - 3 Elevations - 9000 Fixed... 9000PW - 4 Available Sizes - 9000 Fixed... 9000PW - 5 Elevations,
More informationLarge Scale CalArc Pavers for Sand-Set Pedestrian Use Installations
The following specification refers to the Stepstone, Inc. product known as: Large Scale CalArc Pavers for Sand-Set Pedestrian Use Installations Large Scale CalArc Pavers are part of the California Architectural
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-12 36 00.00 20 (August 2011) --------------------------------- Preparing Activity: NAVFAC Superseding UFGS-12 36 00.00 20 (April 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationSECTION ADMINISTRATIVE REQUIREMENTS SECTION ADMINISTRATIVE REQUIREMENTS
PART 1 GENERAL 1.01 SECTION INCLUDES A. Project Coordination. B. Preconstruction meeting. C. Progress meetings. D. Preinstallation conferences. E. Requests for information (RFI). F. Coordination drawings.
More informationAuto-drafting Module for midas Gen MIDAS Information Technology Co., Ltd.
MIDAS Information Technology Co., Ltd. 01 Introduction midas DShop empowers engineers to streamline the design process all the way to generating engineering drawings. midas DShop imports models complete
More informationENGINEERING & TECHNOLOGY PROGRAM
ENGINEERING & TECHNOLOGY PROGRAM COURSE LENGTH CREDITS OPEN TO Construction Technology Year 5 9-12 Manufacturing Technology I Semester 2.5 9-12 Manufacturing Technology II Year 5 10-12 Technical C.A.D.
More informationCabrillo College Catalog
ENGINEERING TECHNOLOGY Natural and Applied Sciences Division Wanda Garner, Division Dean Division Office, Room 701 Gary Marcoccia, Program Chair, (831) 479-5705 Aptos Counselor: (831) 479-6274 for appointment
More informationEDUCATOR SERIES. Wood Casework Solutions For Life. Learning. Discovery.
EDUCATOR SERIES Wood Casework Solutions For Life. Learning. Discovery. Always True to Your Vision. CiF Lab Solutions Experience Commitment to Excellence With decades of experience in manufacturing premium
More informationSeries 9000 Vinyl Single Hung
Series 9000 Single Hung Series 9000 Vinyl Single Hung Contents List of Architectural Drawings...9000SH - 3 Elevations - Single Hung...9000SH - 4 Available Sizes - Single Hung...9000SH - 5 Elevations -
More informationDrafting Careers. Description. Lesson Objectives. Assumptions
Youth Explore Trades Skills Description This Activity Plan introduces students to various drafting-related occupations. Drafting is foundational to most trades careers, including supervisory positions
More informationmidas DShop Reinforcement Edit Function reflecting Constructability
01 Auto-generation of Structural Drawings 02 Structural drawings such as Framing plans, Sectional elevations, Beam/Column schedules, etc., are generated from the analysis & design results of midas Gen.
More informationSECTION SUBMITTAL PROCEDURES
SECTION 01330 SUBMITTAL PROCEDURES PART 1 - GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide submittals in accordance with the General Conditions as modified by the Supplementary Conditions,
More informationThe Marble & Granite Company With Architecture, Engineering Expertise
The Valda Family has been in the construction business for over 30 years and is known throughout the industry as the pioneering specialty stone contractor in the country. The company is adept in every
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-08 51 69.10 (April 2006) ----------------------------- Preparing Activity: NAVFAC Replacing without change UFGS-08582 (August 2001) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationCanadian Clay & Glass Gallery. Strategic Plan
Canadian Clay & Glass Gallery Strategic Plan 2018-2021 Table of Contents ORGANIZATIONAL PROFILE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
More information3400 Tectura Designs Precast Concrete
3400 Tectura Designs Precast Concrete PART 1 - GENERAL 1.1 SUMMARY A. Perform all work required to furnish and complete the proper installation of precast concrete. B. Types of Precast Concrete work include:
More informationSeries 6000 Vinyl Single Hung
Series 6000 Horizontal Slider Series 6000 Vinyl Single Hung Contents List of Architectural Drawings...6000SH - 3 Elevations - Single Hung...6000SH - 4 Available Sizes - Single Hung...6000SH - 5 Series
More informationTG Glazing Design-Build
TG08.1 - Glazing Design-Build Question No. 0040 0041 0042 0043 Submission Date Question 7.14.2011 Is it acceptable to use 304 stainless in lieu of 316 where the material will be painted per 09 97 15? 7.14.2011
More informationandrew p. vuono AndrewVuono.com Luis Vidal + Architects contact Kendall/Heaton Associates, Inc. experience education technology activity/publications
00 Samual Bluff Ct Sugar Land, TX 9 p: 0.9.800 av@ experience Luis Vidal + Architects Project Architect November 0 - February 0 KendallHeaton Associates, Inc. Project Manager December 0 - November 0 DeLaCour,
More informationSECTION SUBMITTALS PART 1 - GENERAL 1.01 RELATED DOCUMENTS
SECTION 01300 SUBMITTALS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and other Division-1 Specification Sections,
More informationsubmittals 1s e c t i o n
Architectural Woodwork Standards submittals 1s e c t i o n SECTION 1 introductory Information Introduction...25 What to Expect...25 Purpose...25 Level of Detail...25 Approvals...25 Scheduling...25 The
More information