Locker systems & Cloakroom systems

Size: px

Start display at page:

Download "Locker systems & Cloakroom systems"

Clemence Potter
5 years ago
Views:

1 Locker systems & Cloakroom systems Type VITRUM GS / GVKF13 / SGVK13 / AGVK13 / S20

Type VITRUM GS Puristic elegance. Coloured glass front panes combined with stone, concrete and wood. Despite the opposing materials used, a perfect ensemble was created.

The material glass with its endless variations of colours creates the impression of elegance and quality and offers architecture nearly limitless design options.

2 Type VITRUM GS Puristic elegance. Coloured glass front panes combined with stone, concrete and wood. Despite the opposing materials used, a perfect ensemble was created. The Schäfer lockers Vitrum GS with security glass front panels are the design highlight in the changing area. The material glass with its endless variations of colours creates the impression of elegance and quality and offers architecture nearly limitless design options. Moreover, glass attributes a variety of product advantages for its use in the changing areas: Very simple and efficiently to clean, high resistance against mechanical damages and due to the known properties of the material type Lockers type Vitrum GS. Body made of white HPL, front sides made of 10 mm enamelled single pane safety glass. The installation in the picture is mounted on a tiled concrete plinth. This is only one of many installation options. Dark glass colours in general radiate a subtle quietness and elegance. The sense of space can be significantly influenced with the selection of colours. glass, careful handling by its users. That warrants that a changing area with glass cabinets still looks perfect and well cared after many years of use. 2 3

Type VITRUM GS Appealing design and incredibly adjustable.

By using a cabinet system that has variable height, depth and width as well as a push-in system made from HPL-materials, the system

Any space can be used Lockers made of glass installed on tiled plinth existing on site.

Optionally, the glass doors of the lockers are available with bonded hinges.

3 Type VITRUM GS Appealing design and incredibly adjustable. The Schäfer lockers Vitrum combine the best of proven technology and new design - combined in a winning solution. By using a cabinet system that has variable height, depth and width as well as a push-in system made from HPL-materials, the system can be easily assembled to fit into existing buildings. Any space can be used Lockers made of glass installed on tiled plinth existing on site. Different colours should give the visitors a better orientation. Deposit boxes installed in a niche. Optionally, the glass doors of the lockers are available with bonded hinges. Thus, the existing aluminum fixing rosettes omitted in the hinge area. The result: a smooth and calm optic. Due to the variable construction, also round designs can be realised without problems. On top of the lockers, a room height cover with ventilation openings. effectively. An unique, innovative finger protection guarantees best safety - certificated by the German TÜV! German TÜV approved safety guarantees perfect quality! 4 5

Type GVKF13 Design and function oriented. Schäfer lockers, type GVKF13 with flush mounted front panels.

The combination of different surfaces and colours creates visual design highlights.

Lockers type GVKF13, in this example, installed on central supporter legs.

One aspect, which especially in pool areas caters long term cost advantages.

4 Type GVKF13 Design and function oriented. Schäfer lockers, type GVKF13 with flush mounted front panels. This creates a calm optic and the coloured panel material displays its advantages. The combination of different surfaces and colours creates visual design highlights. The variable locker body construction allows an easy adjustment to the dimensions from the project. Lockers type GVKF13, in this example, installed on central supporter legs. With this measure, cleaning is extremely simplified. One aspect, which especially in pool areas caters long term cost advantages. Entirely surface flush mounted doors with transponder lock and engraved cabinet number. Locker system type GVKF13 on a tiled plinth on-site. Variations in colour loosen up the design and set special accents. Lockers type GVKF13 installed on a tiled concrete plinth. German TÜV approved safety guarantees perfect quality! 6 7

Type GVKF13 Limitless individuality. Schäfer lockers type GVKF13, completely made of waterproof HPL.

This allows realising your very own and special designs.

HPL panel material. That creates a robust and durable surface. German TÜV approved safety guarantees perfect quality!

The complete body is made of water-resistant HPL and therefore extremely robust and durable.

5 Type GVKF13 Limitless individuality. Schäfer lockers type GVKF13, completely made of waterproof HPL. Dimensioning and separation is entirely free and supplemented with the option to design the front panels with your own motifs. This allows realising your very own and special designs. In such cases, the designs are usually provided by the client and will be imprinted during the manufacturing processes of the HPL panel material. That creates a robust and durable surface. German TÜV approved safety guarantees perfect quality! Lockers type GVKF 13 (here the locker body in a special version) with a customized front motif. The complete body is made of water-resistant HPL and therefore extremely robust and durable. Optional door numbering engraved into the HPL. Threefold locker set on an aluminium plinth with plinth cover. This is only one of many possible variants. In this case, the motif is adapted to the overall project school and the learning theme. That way, the furniture design emphasizes the overall architecture. 8 9

Type SGVK13 / AGVK13 Economically and variable. Lockers of the types SGVK13 resp.

aluminium in combination with a 13 mm HPL door allows many design options.

A protective baked enamel finish creates the necessary surface protection.

A comfortable and elegant solution, which combines high usage comfort with cleaning friendliness.

6 Type SGVK13 / AGVK13 Economically and variable. Lockers of the types SGVK13 resp. AGVK13 are economical alternatives for the wardrobe area. A locker body of paint coated steel resp. aluminium in combination with a 13 mm HPL door allows many design options. The body is spot welded, which guarantees high stability. A protective baked enamel finish creates the necessary surface protection. Locker system type SGVK13 installed on a tiled plinth with a bench attached. A comfortable and elegant solution, which combines high usage comfort with cleaning friendliness. Cabinet number engraved in the HPL door. Due to the high variability, alternating single and double lockers is not a problem. Facing changing cubicles of type EF-3 complete the overall solution. Interesting design highlights can be realised by playing with diverse colour combinations. German TÜV approved safety guarantees perfect quality! 10 11

Safety deposit boxes Storing valuables has a high significance especially in pool and fitness areas.

For that purpose, monitored areas are more suitable.

The material combination of concrete and glass is an ideal match.

7 Safety deposit boxes Storing valuables has a high significance especially in pool and fitness areas. The storage of valuables should generally be separated from the regular lockers. For that purpose, monitored areas are more suitable. Safety deposit box system type Vitrum GS, here with security glass doors, printed with a client individual motif. A very functional and exclusive overall solution where the safety deposit boxes are flush mounted in to the front glass panel. An architectonic highlight: Free hanging glass safety deposit box (type Vitrum GS). The material combination of concrete and glass is an ideal match. Facing deposit boxes, also type Vitrum GS. Safety deposit box type GVKF13 with 13 mm full core panel shelf board attached below. Compartment separations and sizes are nearly freely selectable. Safety deposit box system type GVKF13, colour matched to other furniture. (5) A glass version of deposit lockers type Vitrum GS. TÜV geprüfte Sicherheit spricht für höchste Qualität. (5) 12 13

Shelf solutions Shelf solutions, shelf spaces and hook rails complete the cabinet program in a perfect manner.

Hereby, dimensions, separations and shapes can be realised according to the customer s desire.

The high stability of this construction allows its use as a bench.

The irregular and asymmetric compartment separation creates an interesting design effect with economic user

An interesting filling system provides the Schäfer shelf solution in hemispherical shape.

8 Shelf solutions Shelf solutions, shelf spaces and hook rails complete the cabinet program in a perfect manner. An overall furnishing concept can be realised by using the same materials and surfaces. Hereby, dimensions, separations and shapes can be realised according to the customer s desire. Floor placed shelf system made of 13 mm HPL panels with with an aluminiumveneered plinth. The high stability of this construction allows its use as a bench. Wall mounted shelf system made of 13 mm HPL panels. The irregular and asymmetric compartment separation creates an interesting design effect with economic user comfort. Wall mounted shelf system made of 13 mm HPL panels with differently coloured rear wall. An interesting filling system provides the Schäfer shelf solution in hemispherical shape. Outside diameter 1,520 mm, tray sizes 250 x 250 mm. The design can varied by colourful accents. (5) Glass solutions are suitable for shelf areas as well. That way, shelves and towel holders can be designed according to customer requirements. TÜV geprüfte Sicherheit spricht für höchste Qualität. (5) 14 15

Type S20 Double-sided bench with a hook rail round the top. The underframe of the bench can be supplied either powdercoated or anodised, as required.

In standard version, the bench seating consists of 20 mm, the back rest of 13 mm thick solid grade laminate panels. These can be delivered without joint up to a length of 2.500 mm.

Alternatively, the bench tops can be supplied made out of 13 mm solid-core shelves, doubled up to 26 mm, as shown here. Hook rail made of round aluminium tubing, with triple safety hooks.

This is a very easy to clean solution but it requires a high stability and bearing strength of the brickwall.

In this picture shown in combination with glass locker type Vitrum GS.

9 Type S20 Double-sided bench with a hook rail round the top. The underframe of the bench can be supplied either powdercoated or anodised, as required. This construction is also available as single sided bench with a hook rail (type d). In standard version, the bench seating consists of 20 mm, the back rest of 13 mm thick solid grade laminate panels. These can be delivered without joint up to a length of mm. All corners and edges are rounded for safety. Moreover, the used safety hooks guarantee a high safety standard. Alternatively, the bench tops can be supplied made out of 13 mm solid-core shelves, doubled up to 26 mm, as shown here. Hook rail made of round aluminium tubing, with triple safety hooks. The hooks are fixed behind the rail, so that no parts are overhanging and the danger of hurts is minimized. Wall-mounted bench with wall-mounted hook rail. This is a very easy to clean solution but it requires a high stability and bearing strength of the brickwall. For dry areas, bench seatings alternatively are available out of lacquered solid wood panels. This leads to high-quality optics. In this picture shown in combination with glass locker type Vitrum GS. (5) Hook rail with a carrier panel of 10 mm safety glass, optionally satin finished, clear or colour coated, with special stainless steel hooks and flush mounting rosettes for wall installation. Safety, stability, modern design. The Schäfer S20 cloakroom system combines safety requirements in the changing area with robust stability under heavy loads and appealing design for attractive layout in various situations. This makes it perfectly suited for all areas of application, such as swimming pools, sports halls, schools and changing areas. Due to the simple, systematic method of construction it can be adapted to suit almost all structural TÜV geprüfte Sicherheit spricht für höchste Qualität. requirements. (5) 16 17

Features and accessories A very solid stainless steel doorstopper

stainless steel hinges. Img. Type GVKF13.

throughout the cabinet s body and is equipped with a buffer.

with a silver colour plastic number plate with black engraving.

appealing option. This image shows a contour engraving.

The interior of the single cabinet type GVKF13 consists of the hat

Other interiors are available on customer request.

the hat rack, clothes rail and two movable hooks.

(13) + (14) + (15) Key bracelets made of various materials, key

designed according to customers requirements. Please contact us.

easy to clean. (6) Optional rail rack of aluminium tubes.

(7) Optional, the cabinet floor can be perforated or slotted

(16) Nonbreakable nylon clothes hangers, designed for the standard

10 Features and accessories A very solid stainless steel doorstopper (for single, double and Z-cabinets) limits the door opening angle to 95. The doorstopper is equipped with a buffer to minimise noise emission. All doors are equipped with flush mounted and maintenance free stainless steel hinges. Img. Type GVKF13. At cabinets of type SGVK13/ AGVK13 the opening limiter is mounted throughout the cabinet s body and is equipped with a buffer. (10) (11) (12) (10) By standard, all cabinet types are equipped with a silver colour plastic number plate with black engraving. Optionally, number plates are available in aluminium or stainless steel. (11) Engraving directly in the HPL is a permanent and optically appealing option. This image shows a contour engraving. (12) Optionally, the number or design can be completely milled out. The interior of the single cabinet type GVKF13 consists of the hat rack, clothes rail and movable double hook. Other interiors are available on customer request. The interior of the single cabinet type SGVK13/AGVK13 consists of the hat rack, clothes rail and two movable hooks. An optional cabinet perforation will be based on customer request. (13) + (14) + (15) Key bracelets made of various materials, key tags with engraved numbers and other cabinet accessories can be designed according to customers requirements. Please contact us. (13) (14) (15) (5) Shelf rack of a wardrobe cabinet type GVKF13, completely closed. The insensitive full core material and the rounded body corners are easy to clean. (6) Optional rail rack of aluminium tubes. Here, water can drop down. (7) Optional, the cabinet floor can be perforated or slotted according to customer request. (16) Nonbreakable nylon clothes hangers, designed for the standard sizes of the wardrobe cabinets. (17) An additional clothes net increases the visitors comfort. (18) Clothes hangers with additional shoe hooks. (19) Clothes hangers with shoe hooks and net. (5) (6) (7) (16) (17) (8) Locking solutions, e.g. deposit locks can also be integrated without problems to the cabinet systems. The doors of single and double as well as Z-cabinets are equipped with a theft security bolt. (9) Cylinder lever locks designed as master key system are usually used in the area of personal lockers. (8) (9) (18) (19) 18 19

420 1550 420 Variants and styles Lockers The division of Schäfer lockers is very variable. No matter if single, double, multiple cabinets up to Z-cabinets, helmet and safety deposit boxes.

11 Variants and styles Lockers The division of Schäfer lockers is very variable. No matter if single, double, multiple cabinets up to Z-cabinets, helmet and safety deposit boxes. Sizes and arrangements can be ideally attuned to the present space situation Bench-variants: (a) Bench with front support and wall attachment. (b) Foot-free bench with wall attachment. 400 (a) (b) (c) 430 (d) Personal lockers Personal lockers as black-white cabinets are available in various designs. One centre divider wall in the cabinet compartment segregates street clothes from working clothes. For example, this centre wall can also be movable. (c) Bench as a free standing stool bench design. (d) Single-sided bench with hook rail and backrest Set-up variations Also the set-up options cater for the relevant building situation: (a) Installation on aluminium plinth. (a) (b) (c) (d) (e) Double-sided bench with hook rail and backrest. (f) Bench with shoe rack, available for all styles. (b) Installation on a tiled concrete plinth (c) Installation on an aluminium plinth with integrated bench (d) Installation on a tiled concrete plinth with integrated bench (e) (f) Subject to technical alteration. Roof variants Attached slanted rooves prevent that bags or other items will be placed on top of the cabinets. An important criterion in hygiene sections

12 Stylish So schön and elegant kann Trennung partitioning! sein. 6/17 designforidentity marken- und kommunikationsdesign ltd. cubicle systemes easy to design on registered at the German society of pre-qualification for building companies e.v. Registration number: Schäfer Trennwandsysteme GmbH, Industriepark 37, D Horhausen, Fon: +49 (0)2687 / , Fax: +49 (0)2687 / , info@schaefer-tws.de,

One programme many advantages. Type C-BASIC the extremely sturdy WC cubicle made of HPL

BASIC WC cubicles BASIC contents One programme many advantages............................ page 3 Type C-BASIC the extremely sturdy WC cubicle made of HPL................ page 4 / 5 Type D-BASIC the inexpensive