1. Show the following information with additional information necessary to indicate shop compliance with the requirements of this section.
|
|
- Valentine Goodman
- 5 years ago
- Views:
Transcription
1 SECTION LIBRARY SHELVING PART 1 GENERAL 1.01 SUMMARY A. Related Sections: Carpentry Metal Studs, Lath, Suspension Ceiling, Plaster and Stucco Resilient Tile Flooring Carpet Painting SUBMITTALS A. Shop Drawings: 1. Show the following information with additional information necessary to indicate shop compliance with the requirements of this section. a. Layout. b. Details. c. Dimensions. d. Assembly. e. Anchorage of shelving units: 1.03 SYSTEM DESCRIPTION 1) To adjacent floor surfaces. 2) To adjacent wall surfaces. A. Shelving Unit Description: 1. Single unit construction of the bracket type, with adjustable shelves of varying depths as shown on the Drawings, cantilevered from central columns by means of shelf brackets. 2. Each section shall be a complete unit without the use of adjacent columns, stiffeners, sway braces, angle or gusset plates, and the like. 3. Each unit or section shall have a welded integral unit frame providing a completely closed flush interior. 4. Provide base shelves and base shelf brackets as single faced components. Project No. SPECIFICATION GUIDELINES
2 PART 2 PRODUCTS 2.01 MANUFACTURERS A. Library Shelving: 1. Borroughs MFR Corp., Wilsonstak Div., Kalamazoo, MI. 2. Library Bureau, Herkimer, NY. 3. M.J. Industries, Inc., Georgetown, MA. 4. Montel, Inc., Aetnastak Division, Frackville, PA. 5. Tennsco Corp., Estey Div., Dickson, TN EQUIPMENT A. Shelving Unit Detailed Requirements: 1. Columns: a. 16 gage steel channel shape with 1/2" stiffening flanges, measuring 2 inches in the web and 1-1/4" at the front and rear faces. b. Perforate columns on both faces with a row of slots spaced 1 inch on vertical centers to receive hooks and lugs of shelf brackets. c. Provide intermembering holes for bolting columns into range. d. Provide 2 uprights for each unit of a range. 2. Top Spreader Tube: a. 16 gage fully closed tube. b. Length: Standard 36 inches, with 30 inch and 24 inch units as indicated on Drawings. c. Attach top and bottom edge of each end of tube to the upright columns by means of continuous welds the full width of the tube. 3. Bottom Spreader Channel: a. 16 gage steel, with continuous welds to the upright columns. b. Length of Channels: Same as above for the top spreader. c. Attach bottom edge of each end of the channel to the upright columns by means of continuous welds the full width of the channel. 4. Adjustable Shelves: Project No. SPECIFICATION GUIDELINES
3 a. Front and Rear Edges: 3/4" high. b. Design Load: 50 pounds per square foot without deflection of more than 3/16". c. Shelf Length: Standard 36 inches, with standard 30 inch and standard 24 inch shelves as indicated on Drawings. d. Shelf Depth: 1) Single Faced, Wall Attached: 7, 9, and 11 inches. 2) Double Faced, Free Standing (Floor Attached): 8, 10, and 12 inches. 5. Shelf Bracket: 16 gage steel with front, top, and bottom faces flanged with a 1/4" return. 6. Closed Base Shelves: a. 18 gage, one piece construction, with one piece base shelves for both single and double-faced units. b. Shelf Length: Standard 36 inches, with standard 30 and 24 inch shelves as indicated on Drawings. c. Shelf Depth: 1) Single Faced, Wall Attached: 8, 10, and 12 inches, nominal. 2) Double Faced, Free Standing: 8, 10, and 12 inches, nominal. 7. Finished End Panels: a. Provide one piece end panels the full height of the shelving unit at exposed range ends in width equal to the overall depth of the base shelf and upright b. Single Faced Finished Ends: 18 gage patterned steel with 1-1/2" faces, a returned 3 inch stiffening flange inside each face, and suitable stiffening flanges inside top and bottom. c. Double Faced Finished Ends: Same as single faced above but further reinforced by a full vertical hat-shaped channel. d. Single faced ends shall be non-handed. 8. Base Support Covers: a. Provide at exposed range ends to finish off the exposed ends of base shelf supports. b. Fabricate in the same manner as the base shelf supports and of the same gage, except that shelf supporting lugs and bottom flange shall be Project No. SPECIFICATION GUIDELINES
4 eliminated. 9. Metal Canopy Tops: a. Canopy Tops: 18 gage steel with front face 1-1/2" high. b. Provide for all sections, one for single-faced sections and one for double-faced sections. 10. Plastic Laminate Canopy Tops: a. Fabricate of 3/4" plywood core with plastic laminate on both faces and all exposed edges. 1) Plastic Laminate: High pressure melamine laminate NEMA LD-1, General Purpose Grade, 0.05" minimum thickness, plate textured, with color or pattern selected by the A/E. B. Accessories Minimum Requirements: 1. Divider Type Shelves: 18 gage steel, with front face 3/4" high. 2. Two piece divider shelves: a. As specified by the manufacturer. b. Provide a kick strip as specified under closed base shelves. 3. Dividers: a. Exposed Edges of the Divider: Smooth and free from burrs. b. Letter and Legal Size Dividers: 6 inches high. 4. Range Finder: V-shaped designed to hold 3" x 5" cards. 5. End Panel Holder: Polished aluminum designed to accept 3" x 5" cards. 6. Label Holder-Snap On: a. 24 gage anodized aluminum by 5 inches wide with a 3/4" high front flange, designed to fit snugly to the front return of the adjustable shelves with no encroachment on storage surface. 7. Hinged Periodical Shelves: a. 18 gage steel storage shelves, nominal 12 inch, 14 inch actual depth. b. Front face: 1 inch high with top edge having a 1/2" Project No. SPECIFICATION GUIDELINES
5 hem bend on the outside surface. c. Sides: 1 inch high. d. Back Flange: 1/2" and formed downward to provide a smooth flush surface for display material. e. Pivot: 16 gage on the underside of the shelf at each side, located so the display shelf will rest in a horizontal position without handholding. 1) Secure pivot to the storage shelf bracket with a 1/4-20 shoulder bolt and lock nut. f. Brackets: 18 gage storage shelf and the 16 gage storage shelf brackets shall be 12 inches nominal depth (11 inches actual) and be constructed similar to the standard 18 gage adjustable shelf and 16 gage adjustable shelf bracket except that the shelf brackets shall be punched to receive the shoulder bolts for attaching the pivots. 8. Newspaper Rack: a. Six Dowels: Standard to the manufacturer. b. Ten Dowels: Standard to the manufacturer. 9. Newspaper Dowels: a. Dowels: Model No , or accepted equivalent. b. Rubber Ring: Model No , or accepted equivalent. c. Manufacturer: Brodart, Inc., Williamsport, PA. 10. Microfilm Shelves: a. Size: 4 or 6 inches nominal width. b. Construction: 1) 19 gage steel with the front face formed 3/4" high box-formed. 2) Actual Shelf Depth: 3-1/2" or 5-1/2", with 1 inch high rear flange formed upward to provide a backstop for the microfilm, and the shelf shall have 11/16" end flanges formed downward. 3) Exposed Corner of the Brackets: Smoothly rounded with 3 projections at the rear to engage the column slots. 4) Bottom Flange: Provide a bottom flange for additional shelf support. 5) Eliminate all sharp edges on shelves or brackets. Project No. SPECIFICATION GUIDELINES
6 11. Microfilm Shelves Sloped: a. Size: 4 or 6 inches nominal depth. b. Construction: 1) 19 gage steel with the front face formed 1 inch high box-formed. 2) Slope the shelf at approximately eight degrees and the actual depth shall be 3-1/2" or 5-1/2" with a 7/8" rear flange formed upward. 3) The shelf shall have 1/2" end flanges formed downward. 4) Shelf brackets: 16 gage steel spot-welded to the shelf and flanges. 5) Exposed Corner of the Brackets: Smoothly rounded with projections at the rear to engage the column slots. 6) Eliminate all sharp edges on shelves or brackets. 12. Shelf Backstops: a. 18 gage steel, 3 inches high. b. Provide for each individual adjustable shelf. 13. Storage Shelves: a. 18 and 22 inches nominal shelf depth (nominal depth 1 inch greater than the actual depth which is from face of column to front face of shelf) of not less than 18 gage steel with front and rear faces 1-1/8" high and box-formed. b. Front Face: Present a smooth closed appearance inside and outside, with all sharp edges eliminated. c. Rear Face: Notch both ends to allow clearance for the eleven gage inverted support brackets. d. Side Flanges: 1-1/8" formed down and punched for fastening to the inverted shelf support bracket slots with 2 number by 3/8" cadmium R.H.M.S. with hex nuts. e. Spot-weld a 24-gage steel hat-shaped stiffener to the underside of the shelf surface (2-1/4" in width and 3/4" in height after forming). f. Stiffener: Extend the length of the shelf, except that it shall allow clearance for the horizontal leg of the shelf support brackets. 14. Inverted Storage Shelf Support Brackets: Project No. SPECIFICATION GUIDELINES
7 a. Sizes: 8, 9, 10, 12, 16, 18, and 22 inches nominal shelf depth. b. Length of the Bracket: Approximately 2 inches less than the nominal depth of the shelf. c. Construction: 1) 11 gage steel, with all exposed edges rounded. 2) Brackets shall have 3 projections at the rear, 2 hooks and 1 safety lug, to engage the column slots. 3) Horizontal leg of the bracket shall be of 1 inch minimum width and provided with two 1/4" by 1/2" slots. 4) Vertical leg shall be a minimum of 1-1/2" wide by 3-5/8" long. 15. Adjustable Storage Shelves: a. Sizes: 8, 9, 10, 12, and 16 inches nominal shelf depths. b. Construction: 1) 18 gage steel with front and rear faces formed 3/4" high and box-formed. 2) Present a smooth, closed appearance on both faces, inside and outside, with all sharp edges eliminated and be formed to receive wire book supports and label holders. c. Design Load: 50 pounds per square foot without deflection of more than 3/16". d. Nominal Depth of Storage Shelves: 1 inch greater than the actual depth from face of column to front face of shelf. e. Shelves shall have 11/16" side flanges formed down and shall be punched for fastening to the inverted shelf support bracket slots with two by 3/8" cadmium, R.H.M.S. with hex nuts. 16. Sliding Reference Shelf: a. 18 gage steel. b. Operate on double extension ball bearing slides. PART 3 EXECUTION 3.01 INSPECTION A. Do not proceed with the work of this section until Project No. SPECIFICATION GUIDELINES
8 conditions detrimental to the proper and timely completion of the work have been corrected in an acceptable manner INSTALLATION A. Single Faced: Attach to the wall with approved fasteners as recommended by the shelving manufacturer and as shown on the accepted shop drawings. B. Double Faced: 1. Attach to the floor with approved fasteners as recommended by the shelving manufacturer and as shown on the accepted shop drawings. 2. Testing: Demonstrate, if so directed by the A/E, the units will withstand a pressure of 100 pounds in any direction applied at a point 4 feet from the floor without deflecting more than 1/2" at the top. C. Installation of Adjustable Shelves: 1. Insert shelf brackets so that each shelf aligns with its neighbor on either side. 2. Verify the Board's required shelf-to-shelf spacing with the A/E before inserting brackets into columns. D. Installation of Plastic Laminate Canopy Tops: 1. Single Faced Units: Install tops flush with top surface of top spreader tube and with metal end panels complete with brackets and fastenings as recommended by the shelving manufacturer and as shown on the accepted shop drawings. 2. Double Faced Units: Install tops over the top spreader tube, and metal end panels complete with brackets and fastenings as recommended by the shelving manufacturer and as shown on the accepted shop drawings. 3. Joints: Maintain minimum joint spacing as indicated on accepted shop drawings. E. After completion of the work, touch up any abraded spots to match adjacent surfaces. F. Correct or replace metal and plastic laminate surfaces that have become defaced, deformed, or otherwise rendered unserviceable. END OF SECTION Project No. SPECIFICATION GUIDELINES
Wilsonstak. library bookstacks general specifications. Wilsonstak
Wilsonstak library bookstacks general specifications Wilsonstak Scope This specification covers delivery and installation of Steel Bookstack Shelving of the bracket type only. Unit heights, depths and
More informationSystem 3000 specifications
System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be
More informationL & T Open Shelf Filing System
L & T Open Shelf Filing System Contemporary Styling Shelf covers shelf supports for a clean contemporary look. Sleek, Attractive Appearance With no exposed holes on uprights. Easy Assembly Shelf supports
More informationSCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
More informationBefore Assembling the Storage Wall
Chapter 1 Assembling the Lista Storage Wall Lista provides two types of standard Storage Walls: B251 and B255. The design, construction, assembly, and quality are identical for both types, however, B251
More informationBCI General Specifications Design: BCI Steel Cantilever Shelving - System 60/30
BCI General Specifications Design: BCI Steel Cantilever Shelving - System 60/30 SH1.0 General SH1.0.1 All finished surfaces shall be free of scratches, marks, dents or blemishes, and exhibit no flaking,
More informationC. Samples for Initial Selection: Manufacturer's color charts showing the full range of colors available.
SECTION 105113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationBCI General Specifications Design: BCI Opal Shelving System
BCI General Specifications Design: BCI Opal Shelving System SH3.0 General Product Design and Construction SH3.0.1 The shelving system is constructed with vertical frames connected by horizontal and diagonal
More informationInstallation Manual for Metal Emperor Lockers
P a g e 1 Table of Contents Page General Notes and Tools Required 2-3 Assemble Shelves with Coat Hooks/Coat Rods 4 Fastening Chart 5 Knock Down Locker Assembly (Banks of Three) 6-12 Appendix A: Dress End
More informationMobile Weapons Storage System Specifications
Mobile Weapons Storage System Specifications Whatever your weapon storage needs, Hi-Density s customized Weapons Storage System will be designed to fit your unique specifications. We recognize that security
More informationBox Edge Plus Steel Shelving Installation Instructions
Box Edge Plus Steel Shelving Installation Instructions IMPORTANT PRODUCT LIABILITY INFORMATION Read all instructions before proceeding with installation or shelf loading. Vital product information pertaining
More informationTENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationBCI General Specifications Design: BCI Gothia Shelving System
BCI General Specifications Design: BCI Gothia Shelving System SH7.0 General Product Design and Construction SH7.0.1 The shelving system is constructed with vertical frames connected by horizontal and diagonal
More informationDENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION METAL LOCKERS
PART 0 A/E INSTRUCTIONS 0.01 GENERAL DESIGN REQUIREMENTS A. Architect shall coordinate with the DPS Project Manager the type, layout and size of lockers required on the project. B. Varsity athletic Lockers
More informationTrack Rack. * Track Racks are not lockable
The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply
More informationLinear Hook- on Worksurfaces
Linear Hook- on Worksurfaces Linear Hook-On Worksurfaces come in three depths and seven lengths. Different worksurfaces have different reqirements for installation that are outlined below. 27 inch deep
More informationINDUSTRIAL WORKBENCH
ASSEMBLY INSTRUCTIONS & PARTS MANUAL #129060 INDUSTRIAL WORKBENCH Tennsco Corp., Dickson, TN 3706-1888 * (61) 6-8000 READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE YOUR Tennsco INDUSTRIAL WORKBENCH.
More informationAMPCO PRODUCTS, INC. TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS A. Drawings and General Provisions of Contract, including General and Supplementary Conditions and
More informationPRODUCT INFORMATION Penco Wide-Span Shelving
PRODUCT INFORMATION Penco Wide-Span Shelving 2946 Larimer St. Denver, CO 80205 303-295-1100 / 800-373-7693 FAX 303-295-2464 Email info@snyderequipment.com www.snyderequipment.com Wide Span Shelving Penco
More informationAssembly, Installation, Maintenance and Operation Instructions For
Assembly, Installation, Maintenance and Operation Instructions For Spacefile LT Storage System January 2010 SPACEFILE INTERNATIONAL CORP. 1145 FEWSTER DRIVE, MISSISSAUGA, ON, CANADA L4W 1A2 TOLL FREE 1
More information19-in. Mini-Rack Cabinet, Type 1
Spec-00466 19-in. DP FX (763) Mini-Rack 422-2588 422-2661 Cabinet, Components and Accessories Free-Stand Networking Cabinets 19-in. Mini-Rack Cabinet, Type 1 Industry Standards NEMA Type 1 EIA 310-D /
More informationInstallation Instructions
by Plato Woodwork Installation Instructions Plato Woodwork, Inc. 200 Third Street SW P.O. Box 98 Plato, MN 55370 www.platowoodwork.com 800.328.5924 SECTION GUIDE GETTING STARTED PAGE # Installation Methods...
More informationDisplay/Accessory Furniture
1 Multimedia Display End-of-Range, 60-013-S00 End-of-range displayer has five 59 1 /2" 19 3 /8" 16" 163 Sloped Shelving Book Displayer sloping shelf spaces for displaying books spine out at an angle for
More informationSolutions AGRICULTURAL LABORATORY & CLASSROOM FURNITURE. Education to Industry. Solutions for Your Workspace & Storage Needs
AGRICULTURAL LABORATORY & CLASSROOM FURNITURE Education to Industry for Your Workspace & Storage Needs www.ageducationalsolutions.com 864-256-0621 info@ageducationalsolutions.com Workbenches Potting Benches
More informationDesign and Construction Standards SECTION ATHLETIC LOCKERS
SECTION 10505 ATHLETIC LOCKERS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. The provisions of the General Conditions, Supplementary Conditions, and the Sections included under Division 1, General Requirements,
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 1350 COMBAT SERIES TOILET PARTITIONS IMPORTANT: Review these instructions thoroughly prior to installation. In the United States: BOBRICK WASHROOM EQUIPMENT INC. 200 Commerce
More informationGlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationStandard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories
Spec-00466 F763.422.2661 763.422.2588 Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories 19-in. Mini-Rack
More informationInstalling Electronic Media Storage Components into Lateral File Cabinets
Steelcase, Inc. Grand Rapids, MI 49501 U.S.A. 1-888-783-3522 Installing Electronic Media Storage Components into Lateral File Cabinets 830-CH-9 830-CH-12 830-CH15 836-CH-9 836-CH-12 836-CH-15 842-CH-9
More informationK.D. LOCKER ASSEMBLY INSTRUCTIONS
K.D. Locker Assembly Instructions PN 0860 K.D. LOCKER Updated /05 ASSEMBLY INSTRUCTIONS These Instructions Cover 3 Types of Lockers: VANGUARD, GUARDIAN AND INVINCIBLE II Contents General Instructions 1
More informationGlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationInsolroll Clutch Operated Shades Installation Instructions Installation Instructions
All clutch operated shades are shipped fully assembled and ready for installation. Mounting screws are not provided. Screws for chain guide installation to meet the child safety standards are provided.
More informationLABORATORY SPECIFICATION SHEET
ELECTRIC HEIGHT ADJUSTABLE LAB WORKSTATION LPC3060-FH30K-WP023060LN LPC3060-FI30K-WP023060LN LPC3072-FH30K-WP023072LN LPC3072-FI30K-WP023072LN LPC3060-FH30K-WP023060ES LPC3060-FI30K-WP023060ES LPC3072-FH30K-WP023072ES
More information.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.
PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Installation
More informationSECTION THERAPEUTIC POOL ACCESSORIES
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 13 17 23.11 THERAPEUTIC POOL ACCESSORIES SPEC WRITER NOTES: Delete between // // if not applicable to project. Also, delete any other item or paragraph not applicable
More informationHALLOWELL HI-TECH SHELVING
LLOLL I-C SLVING i-ech Industrial grade steel shelving continues a tradition of quality established generations ago with the goal of providing a shelving line with the strength needed to handle most industrial
More informationR Form No MILLENNIUM GONDOLA / WALLCASE ASSEMBLY
R06-19-06 - Form No.08335-0109 POST THIS WARNING PAGE IN A CONSPICUOUS PLACE, CLEARLY VISIBLE TO ALL STORE PERSONNEL READ BEFORE ASSEMBLING WARNING FOR YOUR SAFETY Install all shelving units according
More informationOperating, Servicing, and Safety Manual Model " Foot Shear CAUTION: Read and Understand
Operating, Servicing, and Safety Manual Model 3000 52" Foot Shear CAUTION: Read and Understand These Operating, Servicing, and Safety Instructions, Before Using This Machine. SAFETY The purpose of the
More informationAURORA SHELVING PLANNING GUIDE
AURORA SHELVING PLANNING GUIDE TABLE OF CONTENTS THE AURORA SHELVING CONCEPT..........................1 Easy 5-Minute Assembly....................................2 The Aurora Shelving Family..................................3
More informationEquilibrium. Conference Table. Installation Instruction. Revision B 11/07/16
Equilibrium Conference Table Installation Instruction Revision B 11/07/16 Equilibrium End User Agreement Enwork Equilibrium table bases must be installed directly onto a four inch minimum thickness concrete
More informationCTTR Tire Rack Required tools
CTTR Tire Rack Required tools Torque wrench, ratchet, 9/16 socket, tape measure, and square edge. ASSEMBLY REQUIREMENTS *Torque all T-bolt nuts to 35-40 foot pounds. Failure to follow the assembly instructions
More informationTable of Contents F Series Frames
Table of Contents F Series Frames How to Order Frames... F 1 F Series Spec Sheet... F 2 F Series Profiles 1 of 6... F 3 F Series Profiles 2 of 6... F 4 F Series Profiles 3 of 6... F 5 F Series Profiles
More informationTOOLS REQUIRED FOR ASSEMBLY. Rubber Mallet or Plastic Tip Hammer PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER.
TOOLS REQUIRED FOR ASSEMBLY Rubber Mallet or Plastic Tip Hammer Top Cover Support PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER Back Stop Divider Closed 'L' Upright Slotted Reinforcement Support
More informationMobileTrak5 Installation Instructions
MobileTrak5 Installation Instructions PLEASE OPEN ALL BOXES & CHECK TO MAKE SURE YOU HAVE ALL PIECES REQUIRED READ ALL INSTRUCTIONS BEFORE STARTING Tools Required for Assembly 7/16, 1/2 Wrench Phillips
More informationWorktop INDEX eight Capacity Unpacking
Pro.0 Series Warning: Excessive weight hazard! Use two or more people to move, assemble or install cabinets and locker to avoid back injury. Do not leave children unattended near cabinets. High risk of
More informationFlexFrame - Storage Components and Skins
FlexFrame - Storage Components and Skins 1/4 Square Drive Ball-Point Hex-Bit Socket 1/8 Short Hex, 1-1/2 Overall Length McMaster Part # 54075A44 Table of Contents Topic Page Storage Components 2 General
More informationSimotec. 13.i
Products: Framo 80 13.0 Products: Framo 80 13.1 Products: Structural Elements 100/120 13.2 Products: Pipe Shoes 13.3 Framo 80: Beam Section and Screw 13.4 Framo 80: Cantilever Bracket and End Support STA
More informationOPERATIONS MANUAL. Port-O-Slitter
Tapco Products Company The World Leader in Specialty Tools for the Professional Port-O-Slitter OPERATIONS MANUAL General instructions, set up, accessories and guide to using your portable precision slitting,
More informationInstallation Instructions
Installation Instructions For Models: Model Number / Description File Name 1540 Classic Series P-Lam Toilet Partitions 1540.pdf 1 INSTALLATION INSTRUCTIONS LAMINATED PLASTIC TOILET PARTITIONS 1540 Classic
More informationDIVISION 12 - FURNISHINGS. Section General Discussion. Introduction
Section 12000 - General Discussion This General Discussion Section contains material which is important to the successful fabrication and/or installation of furnishings and equipment in construction projects.
More informationSECTION FOLDING GLASS PANEL PARTITIONS
SECTION 10 22 26.35 FOLDING GLASS PANEL PARTITIONS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED FOLDING GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY, MOUNTING BRACKETS, MOUNTING
More informationSECTION PRE-MANUFACTURED CABINETS
SECTION 12390 PRE-MANUFACTURED PART 1 GENERAL 1.1 DESCRIPTION OF WORK A. The work includes furnishing all labor, materials and equipment required to complete the Pre-Manufactured Cabinet work as shown
More informationMechanical System Specifications & Detail Drawings
Mechanical System & Detail Drawings 1-888-989-1370 www.lundiausa.com RECOM GROUP INC. 449 Borrego Court San Dimas, CA 91773 Phone: (909) 599-1370 Fax: (909) 599-2291 MECHANICAL SYSTEM SPECIFICATIONS All
More information1: profile cross section. FD- profile. for sidewalls + backwalls. eaves profile. curved roof profile. Z - profile (alongside frame) L 60 x 60
1: profile cross section FD- profile for sidewalls + backwalls eaves profile curved roof profile Z - profile (alongside frame) L 60 x 60 for backwall Image 2: 1.) Insert feet from below in square tubes
More informationStorage Cabinets 9000 Series Assembly Instructions
Storage Cabinets 9000 Series Assembly Instructions Thank you for selecting Salsbury s storage cabinets. We are confident that the quality and construction of the cabinets will prove to be a good investment.
More information***************************************************************************************************************
10800 TOILET ROOM ACCESSORIES SPECIFIER: CSI MasterFormat 2004 number 10 28 13 PART 1 GENERAL 1.1 SUMMARY A. Related Sections: 1. 04220 - Concrete Unit Masonry. 2. 06100 - Carpentry. 3. 09310 - Ceramic
More informationD. Product Certificates: Signed by manufacturers of casework certifying that products furnished comply with requirements.
SECTION 12356 - CASEWORK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationFranklin Mills Stackable Movable Lateral Instructions
Franklin Mills Stackable Movable Lateral Instructions Table of Contents: Table of contents...1 Tools Required...2 Stationary Shelving Assembly...3-7 Mobile Shelving Assembly...8-16 Rail Assembly...8-11
More informationSECTION STEEL LIGHTING STANDARDS. 1. Electrical conduit and fittings; Section
02760-1 of 5 SECTION 02760 STEEL LIGHTING STANDARDS 02760.01 GENERAL A. Description Steel lighting standards shall include, but not necessarily be limited to, furnishing and installing steel lighting poles,
More informationPORTA-FAB Cleanroom Wall Systems
PORTA-FAB Cleanroom Wall Systems FABLINE BATTEN 2000 INSTALLATION INSTRUCTIONS IMPORTANT Porta-Fab Advises A Thorough Reading of These Instructions Before Beginning Installation. INTRODUCTION Porta-Fab
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More information- 2 JOINER ALIGNERS - 2 JOINING BRACKETS - 4 HEX BOLTS. Factory pre-installed mud flange TOOLS REQUIRED: Phillips screwdriver, 5/16 nut driver.
- 2 JOINER ALIGNERS - 2 JOINING BRACKETS - 4 HEX BOLTS TruGroove Drywall A3 MOUNTING Ceiling INSTALLATION System Overview These instructions review how to install drywall trim versions of TruGroove recessed
More informationStainless Steel Bench Stand
Installation Manual Stainless Steel Bench Stand Product(s): 29600 29601 51229 2016 by Fairbanks Scales, Inc. Revision 2 02/16 All rights reserved. Amendment Record STAINLESS STEEL BENCH STAND Document
More informationInstallation Instructions Standalone or continuous run configurations - 2 JOINER ALIGNERS - 2 JOINING BRACKETS - 4 HEX BOLTS
- 2 JOINER ALIGNERS - 2 JOINING BRACKETS - 4 HEX BOLTS TruGroove Drywall A3 MOUNTING Ceiling INSTALLATION System Overview These instructions review how to install trimless drywall versions of TruGroove
More informationAssembly Instructions
RoomScape Furniture System March 2013 - Bed Styles bed deck board bed deck board top cap top cap base glide middle side rail frame frame stacking device frame middle lower reinforcement side rail Single
More informationTechBench Installation Manual
Manual Table of Contents TechBench Overview....2 Bench Assembly Linear,36 (914,4mm) Wide 96 (2438,4mm) Wide 3,4,5,6,7 Bench Assembly Linear,24 (609,6mm) Wide 30 (762mm) Wide..8,9 Bench Assembly Corner
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationMulti-Stage ASSEMBLY INSTRUCTIONS ST-8100 SERIES. 125 TAYLOR PARKWAY ARCHBOLD, OH PHONE: (419) FAX: (419)
125 TAYLOR PARKWAY ARCHBOLD, OH 43502 PHONE: (419) 445-8915 FAX: (419) 445-0367 www.biljax.com Multi-Stage ST-8100 SERIES ASSEMBLY INSTRUCTIONS ALL DRAWINGS ARE FOR ILLUSTRATION ONLY. PRINTED IN U.S.A.
More informationInstallation Guidelines
Installation Guidelines Tando Building Products provides these instructions as general guidelines only. Tando Building Products neither installs exterior cladding nor has any control over any installation.
More informationINSTALLATION INSTRUCTIONS - NSF WALK-IN COOLER/FREEZER Wall-Mounted Shelving System - No Blocking
The components included with this shipment comprise a fully-adjustable, heavy-duty cantilever shelving system. Installed properly, they ll provide decades of superior value in your walk-in cooler or freezer.
More information6 Foot/ 1800mm Aisle Width Net-Contain Aisle Containment for N-Type and S-Type Cabinets
6 Foot/ 1800mm Aisle Width Net-Contain Aisle Containment for N-Type and S-Type Cabinets Panduit Corp. 2016 INSTALLATION INSTRUCTIONS Page 1 of 36 Component Guide for Doors Dual Sliding Containment Door
More informationAPPENDIX FENCE GENERAL NOTES
APPENDIX FENCE GENERAL NOTES 1. Fabric: 9 gage, 2" mesh, knuckle top and bottom, placed on the outside of posts, single fabric width for the entire height. 2. All fencing to be standard galvanized finish.
More informationInterior Equipment/Shop Fittings
Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories
More informationSECTION 12345.1 - MODULAR STEEL LABORATORY CASEWORK 1 PART 1 PRODUCTS 1.01 MANUFACTURER A. Casework and equipment manufacturer: ALIR Systems, Inc., 245 Harrison St, Jamestown, New York, 14701. 1.02 CASEWORK
More informationSECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationSECTION BULLET- RESISTANT DOORS
1 SECTION 08 3950 BULLET- RESISTANT DOORS PART 1- GENERAL 1.01 SUMMARY A. This Section Includes: 1. Bullet- resistant steel door and frame systems. 2. Door hardware for bullet- resistant steel door and
More informationBIKE FILE (301)
B IK E F I L E High Efficiency The Bike File is our most space efficient u-lock compatible product. Sturdy sliding hangers allow nine bikes to be securely stored in an eight-foot section while allowing
More informationVertical Offset Base and Safety Rail System Installation Instructions
Section 5 Vertical Offset Base and Safety Rail System Installation Instructions The vertical offset base and safety rail assembly are designed to be used in residential construction for sloped or flat
More informationC-Series & S-Series Classic Frame with Transom (Single or Pair)
1. TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Safety Glasses Screw gun #2 Screwdriver tip #3 Screwdriver tip Philips Head screwdriver (Used to move frame on wall using oval slots on
More informationMONKEY BARS OVERHEAD RACK INSTALLATION
MONKEY BARS OVERHEAD RACK INSTALLATION Thank you for purchasing the New Monkey Bars Overhead storage rack. The most innovative overhead rack on the market WARNING THE PROPER INSTALLATION OF THIS STORAGE
More informationTOILET ROOM ACCESSORIES Concrete Unit Masonry Carpentry Ceramic Tile Solid Plastic Toilet Partition.
SECTION 10800 TOILET ROOM ACCESSORIES PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 04220 - Concrete Unit Masonry. 2. 06100 - Carpentry. 3. 09310 - Ceramic Tile. 4. 10170 - Solid Plastic Toilet Partition.
More informationFixed Wall Arm. Installation Guide. Part number Rev E 2012 PolyVision Corporation All rights reserved
Fixed Wall Arm Installation Guide Part number 2002003-001 Rev E 2012 PolyVision Corporation All rights reserved Table of contents Important Safety Instructions... 3 Overview... 4 Important considerations...
More informationCABINETRY Assembly Instructions
www.hdicabinetry.com Assembly Instructions TABLE OF CONTENTS Category Page(s) Section 1: Framed Series Base Cabinet Instructions Wall Cabinet Instructions Easy Reach Cabinet Instructions 1.01-1.04 1.05-1.06
More informationQwik-Fence Installation Instructions
Qwik-Fence Installation Instructions 1 Tools Required The following installation instructions should be used as a guide for installing Folding Guard Qwik-Fence Partitions. Good common sense and appropriate
More informationAccessories and workbenches
Workbenches To complete the Elabo furnishing systems, we also provide workbenches and organisable steel plate base cabinets. Steel cabinets, shelves and shelf trolleys are available for storage of materials
More informationExtra Wide Designer Lockers Series Installation Instructions
Extra Wide Designer Lockers 20000 Series Thank you for selecting the 20000 Series Extra Wide Designer Lockers. We are confident that the quality and construction of the lockers will prove to be a good
More informationWorkbench Instructions for Assembly
Workbench Instructions for Assembly Technical Electronic Workstations and Industrial Workbenches Includes: Cabinets Privacy Panels Stringers Bottom Shelves Table of Contents Tools Required for Assembly...
More informationTechnical Environment Systems INSTALLATION MANUAL
Technical Environment Systems INSTALLATION MANUAL Technical Environment Systems INSTALLATION MANUAL Table of Contents INTRODUCTION Full Frame, Open Frame & Upright Assembly...A Foundations...B Mobile &
More informationInstallation Instructions
READ BEFORE INSTALLING UNIT For Slider Casement Air Conditioners To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed:
More informationMETALWORKS Linear (Interior & Exterior Applications)
METALWORKS Linear (Interior & Exterior Applications) Assembly and Installation Instructions 1. GENERAL 1.1 Product Description MetalWorks Linear is a linear metal ceiling system with either a Connections
More informationMETALWORKS TARTAN PANELS General Installation Instructions
CEILING SYSTEMS METALWORKS TARTAN PANELS General Installation Instructions 1. GENERAL 1.1. Product Description MetalWorks Tartan system is a combination of metal ceiling panels available in a range of
More informationPost & Rail. Includes: Crossbuck, 2-Rail, 3-Rail and 4-Rail POST SUPPORT OPTIONS
Post & Rail Includes: Crossbuck, 2-Rail, 3-Rail and 4-Rail STAGGER RAIL ENDS FOR GREATER STRENGTH ALLOW 1-1/2" GAP ON HINGE SIDE OF GATE AND 1-1/4" ON LATCH SIDE OF GATE HARDWARE DIG HOLES 30" MINIMUM
More informationFORWARD FUSELAGE SIDES & REAR TOP SKINS
FORWARD FUSELAGE SIDES & REAR TOP SKINS WORK REPORT Step No. Check Parts / Tools Qty Preparations. 1 [ ] 6F5-3 Upper Front Longerons 2 2 [ ] 6F5-5 Heel Support 1 3 [ ] 6F5-2 Front Floor Skin 1 3 [ ] Firewall
More informationINSTALLING YOUR NEW SPRING LIFT ARM KIT
INSTALLING YOUR NEW SPRING LIFT ARM KIT 1. Measure the distance that the roof is to be raised. [If your lift system is completely non-functional, you will need to calculate or estimate this distance as
More informationSloped Top Shop Desk and Cabinet Conversion Kit Assembly Instructions
Sloped Top Shop Desk and Cabinet Conversion Kit Assembly Instructions IMPORTANT - PRODUCT LIABILITY INFORMATION Read all instructions before proceeding with installation. Vital product information pertaining
More informationNOTE: Top section pole (Q) is packed INSIDE bottom section pole (S)
Form 0905-0 Instructions and Parts List TM- Mini Castle (modified) MARTIN SAFETY SYSTEM NOTES: () A complete system is packed in two boxes post box and house box. House box contains hardware for both post
More informationLaminate Cabinet Installation Instructions
Laminate Cabinet Installation Instructions www.easygaragestorage.com/installation How To Use These Instructions Thank you for your purchase! Please read each step of this manual thoroughly to ensure proper
More informationAssembly Instructions 10 X 10 Aluminum Roof Support
Assembly Instructions 10 X 10 Aluminum Roof Support Aluminum Roof Support Bolt Package 16-5/16 X 2 ¼ SS Bolt 24-5/16 X 1 SS Bolt 40-5/16 SS Nylon Lock Nuts 16-5/16 SS Flat Washers 28-4 ½ Wood Screws 36-1
More informationDuctwork Controls and Instrumentation Outlets (HVAC) HVAC Control System.
SECTION 15910 DUCT ACCESSORIES PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15890 - Ductwork. 2. 15900 - Controls and Instrumentation. 3. 15940 - Outlets (HVAC). 4. 15970 - HVAC Control System.
More information