TECTUS. The completely concealed hinge system
|
|
|
- Rodger Sutton
- 6 years ago
- Views:
Transcription
1 TECTUS The completely concealed hinge system
2 It s still design even if there s nothing to be seen! TECTUS This Latin word for concealed signifies SIMONSWERK s newly developed, completely hidden hinge system. This outstanding hinge system makes it possible, for the first time, to achieve uninterrupted flush-faced surfaces on the hinge side of the door creating a visual, harmonic, overall interior design impression. This becomes of special significance in applications where, in addition to the high performance features of the hinge system, the design aspect plays a more and more important role. Design meets function: Considering all the potential door fitting requirements was the starting point for SIMONSWERK designers to develop the complete hinge system TECTUS. This unrivalled, award winning hinge is now available for use on un-rebated doors, covering the full range of load capacities from 0 kgs, 60 kgs, 100 kgs and 180 kgs up to 00 kgs. TECTUS from SIMONSWERK More applications Freedom in design Complete solutions Concealed means using a TECTUS system to provide the best possible hinge technology in the smallest amount of space
3 TECTUS The new, completely concealed hinge system for unrebated premium choice interior doors, high performance and heavy-duty doors. After the successful introduction of the three TECTUS versions we now launch two further invisible hinges: The new ones of the completely concealed hinge system are called TECTUS TE 10 D and TECTUS TE 60 D. By this enlargement a full range of application possibilities can be covered. TECTUS TE 10 D for premium choice doors Load capacity 0 kgs Pages - 7 TECTUS TE 10 D for premium choice doors Load capacity 60 kgs Pages 8-11 TECTUS TE 510 D for high performance doors Load capacity 100 kgs Pages 1-15 TECTUS TE 610 D for heavy-duty doors Load capacity 180 kgs Pages TECTUS TE 60 D for heavy-duty doors Load capacity 00 kgs Pages 0 - TECTUS The answer to modern trends and demands of interior design. Technical amendments reserved. Date of issue: February 006
4 TECTUS TE 10 D for premium choice doors Completely concealed hinge system for premium choice doors up to 0 kgs. Three-dimensionally adjustable: Side +/- mm, height +/-,5 mm, depth +/- 1,5 mm. Maintenance-free slide bearings. Right hand and left hand applicable. For unrebated doors with wood, steel and aluminium frames. Finishes available: Stainless steel effect (galvanised surface) F1-coloured powder coated F-coloured powder coated Technical Data: Opening angle Load capacity Size Diameter of cutter 180 degree 0 kgs 10 mm 16 mm
5 TECTUS TE 10 D for premium choice doors Descriptive text: SIMONSWERK hinge TECTUS TE 10 D. Completely concealed for unrebated doors with wood, steel or aluminium frames. Opening angle up to 180, Size 10 mm, right hand and left hand applicable, maintenance-free slide bearings, three-dimensionally adjustable: Side +/- mm, height +/-,5 mm, depth +/- 1,5 mm, finish... Block Frame: No additional fixing device necessary Casing frame: With galvanised fixing plate TECTUS TE 10 D FZ Steel frame: With galvanised or stainless steel receiver TECTUS TE 10 D SZ Aluminium frame: With receiver supplied by frame manufacturer Examples of application: Casing frame Block frame Steel frame 5
6 Assembly Installation TE 10-D Affix the door part of the hinge by means of wood screws Ø mm. Block frame: Drill the screw holes by using drilling jig TE 10 D and drill bit Ø mm. Affix frame part by using enclosed wood screws. Casing frame: Affix the fixing plate behind the casing, affix frame part by using enclosed screws M 5. Steel frame: Affix frame part of the hinge with the prepared receiver by using the enclosed screws M5. Fix cover plates onto frame and door part by using the enclosed screws. Calculation of the milling width Ø R cutter Ø Mill with cutter Ø 16 mm, use collar ring Ø 0 mm and select universal milling frame cutter Ø16 with milling templates 1 10 milling scheme block frame milling scheme sash part milling scheme steel frame No (frame) and No (door). 6
7 Drilling jig Fixing plate / Receiver TECTUS Drilling jig TECTUS TE 10 D Casing frames Fixing plate TECTUS TE 10 D FZ 1 Fixing plate galvanised, spacers (1, and mm) Steel frame Receiver TECTUS TE 10 D SZ Finish: galvanised or stainless steel Adjustment Side adjustment 1. Adjust the adjusting spindle 1 using Allan key mm. Twist left - towards hinge (max. mm) Twist right - towards lock (max. mm) 1 Height adjustment 1. Wedge the door.. Slightly loosen the clamping screws.. Bring the door to the correct height.. Retighten the clamping screws. Depth adjustment 1 1. Slightly loosen clamping screws by using Allan key mm.. Put the door into the correct depth.. Retighten the clamping screws. 7
8 TECTUS TE 10 D for premium choice doors Completely concealed hinge system for premium choice doors up to 60 kgs. Three-dimensionally adjustable: Side +/- mm, height +/- mm, depth +/- 1 mm. Maintenance-free slide bearings. Right hand and left hand applicable. For unrebated doors with wood, steel and aluminium frames. Available finishes: Stainless steel effect (galvanised surface) F1-coloured - powder coated F-coloured - powder coated Technical Data: Opening angle Load capacity Size Diameter of cutter 180 degrees 60 kgs 10 mm mm 8
9 TECTUS TE 10 D for premium choice doors Descriptive text: SIMONSWERK hinge TECTUS TE 10 D. Completely concealed for unrebated doors with wood, steel or aluminium frames. Opening angle up to 180, size 10 mm, right hand and left hand applicable, maintenance-free slide bearings, three-dimensionally adjustable: Side and height +/- mm, depth +/- 1 mm, finish... Block frame: No additional fixing device necessary Casing frame: With galvanised fixing plate TECTUS TE 10 D FZ Steel frame: With galvanised or stainless steel receiver TECTUS TE 10 D SZ Aluminium frames: With receiver supplied by frame manufacturer Examples of application: Casing frame Block frame Steel frame 9
10 Assembly Installation TE 10-D Affix the door part of the hinge by means of wood screws Ø 5 mm Block frame: Drill the screw holes by using drilling jig TE 10 D and drill bit Ø mm. Affix frame part by using enclosed wood screws. Casing frame: Affix the fixing plate behind the casing, affix frame part by using enclosed screws M 5. Steel frame: Affix frame part of the hinge with the prepared receiver by using the enclosed screws M 5. Fix cover plates onto frame and door part by using the enclosed screws. Calculation of the milling width 16 Ø.5 Calculation of the milling width: A = Groove frame width up to sealing level R10 R10 B = Door leaf thickness, resp. 1. door groove A B + = Measure X cutter Ø 9 10 The result has to be a measure between and max. 6,5 mm. A B (Steel Frame: X = 5 mm).5 X Mill with cutter Ø mm, use collar ring X 9 cutter Ø 10 milling scheme block frame milling scheme sash part Ø 0 mm and select universal milling frame with milling templates No (frame) No (door). 10
11 Drilling jig Fixing plate / Receiver TECTUS Drilling jig TECTUS TE 10 D Casing frames Fixing plate TECTUS TE 10 D FZ 1 Fixing plate galvanised, spacers (1, and mm) Steel frames Receiver TECTUS TE 10 D SZ Finish: galvanised or stainless steel Adjustment Side adjustment 1. Adjust the adjusting spindle 1 using Allan key mm. Twist left - towards hinge (max. mm) Twist right - towards lock (max. mm) 1 Height adjustment 1. Wedge the door.. Slightly loosen the clamping screws.. Bring the door to the correct height.. Retighten the clamping screws. Depth adjustment 1 1. Slightly loosen clamping screws by using Allan key mm.. Put the door into the correct depth.. Retighten the clamping screws. 11
12 TECTUS TE 510 D for high performance doors Completely concealed hinge system for unrebated doors up to 100 kgs. Three-dimensionally adjustable: Side +/- mm, height +/- mm, depth +/- 1 mm. Maintenance-free slide bearings. Right hand and left hand applicable. For unrebated doors with wood, steel or aluminium frames. Accessories: cable set TECTUS TE 510 D optional for cable conduction. Available finishes: Stainless steel effect (galvanised surface) F1-coloured - powder coated F-coloured - powder coated Technical Data: Opening angle Load capacity Size Diameter of cutter 180 degrees 100 kgs 180 mm mm 1
13 TECTUS TE 510 D for high performance doors Descriptive text: SIMONSWERK high performance hinge TECTUS TE 510 D. Completely concealed for unrebated doors with wood, steel or aluminium frames. Opening angle up to 180, size 180 mm, right hand and left hand applicable, maintenance-free slide bearings, three-dimensionally adjustable: side and height +/- mm, depth +/- 1 mm, finish... Block frame: No additional fixing device necessary Casing frame: With galvanised fixing plate TECTUS TE 510 D FZ Steel frame: With galvanised or stainless steel receiver TECTUS TE 510 D SZ Aluminium frame: With receiver supplied by frame manufacturer Examples of application: Casing frame Block frame Steel frame 1
14 Assembly Installation 18 Ø R1 A B TE 510-D Affix the door part of the hinge by means of wood screws Ø 5 mm Block frame: Drill the screw holes by using drilling jig TE 510 D and drill bit Ø mm. Affix frame part by using enclosed wood screws. Casing frame: Affix the fixing plate behind the casing, affix frame part by using enclosed screws M 5. Steel frame: Affix frame part of the hinge with the prepared receiver by using the enclosed screws M 5. Fix cover plates onto frame and door part by using the enclosed screws. Calculation of the milling width R1 Calculation of the milling width: A = Groove frame width up to sealing level B = Door leaf thickness, resp. 1. door groove A B + = Measure X The result has to be a measure between and max. 5 mm. (Steel Frame: X = 5 mm) X cutter Ø 10 5 X milling scheme block frame cutter Ø milling scheme sash part Mill with cutter Ø mm, use collar ring Ø 0 mm and select universal milling frame with milling templates No (frame) No (door). 1
15 Drilling jig Fixing plate / Receiver TECTUS Drilling jig TECTUS TE 510 D Casing frames Fixing plate TECTUS TE 510 D FZ 1 fixing plate galvanised, spacers (1, and mm) Steel frames Receiver TECTUS TE 510 D SZ Finish: galvanised or stainless steel Adjustment Side adjustment 1. Adjust the adjusting spindle 1 using Allan key mm. Twist left - towards hinge (max. mm) Twist right - towards lock (max. mm) 1 Height adjustment 1. Wedge the door.. Slightly loosen the clamping screws.. Bring the door to the correct height.. Retighten the clamping screws. Depth adjustment 1. Slightly loosen clamping screws by using Allan key mm.. Put the door into the correct depth.. Retighten the clamping screws. 1 15
16 TECTUS TE 610 D for heavy-duty doors Completely concealed hinge system for heavy-duty doors up to 180 kgs. Three-dimensionally adjustable: Side +/- mm, height +/- mm, depth +/- 1 mm. Maintenance-free slide bearings. Right hand and left hand applicable. For unrebated doors with wood, steel and aluminium frames. Available finishes: Stainless steel effect (galvanised surface) F1-coloured - powder coated F-coloured - powder coated Technical Data: Opening angle Load capacity Size Diameter of cutter 180 degrees 180 kgs 10 mm mm 16
17 TECTUS TE 610 D for heavy-duty doors Descriptive text: SIMONSWERK heavy-duty hinge TECTUS TE 610 D. Completely concealed for unrebated doors with wood, steel or aluminium frames. Opening angle up to 180, Size 10 mm, right hand and left hand applicable, maintenance-free slide bearings, three-dimensionally adjustable: side and height +/- mm, depth +/- 1 mm, finish... Block frame: No additional fixing device necessary Casing frame: With galvanised fixing plate TECTUS TE 610 D FZ Steel frame: with galvanised or stainless steel receiver TECTUS TE 610 D SZ Aluminium frame: With receiver supplied by frame manufacturer Examples of application: Casing frame Block frame Steel frame 17
18 Assembly Installation Adjusting bolt Threaded stud 1. Block frame: Affix the sash part of the hinge by means of wood screws Ø 6 mm. Casing frame: Affix the fixing plate behind the casing, affix frame part by using enclosed screws M 6. Steel frame: Affix frame part of the hinge with the prepared receiver by using the enclosed screws M 6.. Mount the adjusting bolt and the threaded stud at the bottom of the frame construction. Hang the door leaf with the hinge part onto the frame construction. A locking device is of assistance.. Fasten the hinge to the frame construction by means of the enclosed screws and the eccentric adjustment.. Adjust and align door with regard to height. Tighten frame screws and screw on cover plates. Calculation of the milling width R1 R1 Calculation of the milling width: R1 A = Groove frame width up to sealing level B = Door leaf thickness, resp. 1. door groove A B +.5 = Measure X The result has to be a measure between.5 and max. 6.5 mm. A B (Steel Frame: X = 5 mm) X.5 Mill with cutter Ø mm, use collar ring X 0 cutter Ø 10 0 milling scheme block frame cutter Ø milling scheme sash part Ø 0 mm and select universal milling frame with milling templates No (step 1) and No (step ). 18
19 Fixing plate / Receiver TECTUS Casing frames Fixing plate TECTUS TE 610 D FZ 1 Fixing plate galvanised, spacers (1, and mm) Steel frames Receiver TECTUS TE 610 D SZ Finish: galvanised or stainless steel Adjustment Side adjustment 1. Adjust the adjusting spindle 1 using Allan key 5 mm. Twist left - towards hinge (max. mm) Twist right - towards lock (max. mm) 1 Height adjustment 1. Slightly loosen the clamping screws by using Allan key 5 mm.. Bring the door to the correct height by twisting the adjusting screw.. Retighten the clamping screws. Depth adjustment 1. Slightly loosen clamping screws by using Allan key 5 mm.. Put the door into the correct depth by twisting the eccentric by using Allan key mm. 1. Retighten the clamping screws. 19
20 TECTUS TE 60 D for heavy-duty doors Completely concealed hinge system for heavy-duty doors up to 00 kgs. Three-dimensionally adjustable: Side +/- mm, height +/- mm, depth +/- 1 mm. Maintenance-free slide bearings. Right hand and left hand applicable. For unrebated doors with wood, steel and aluminium frames. Available finishes: Stainless steel effect (galvanised surface) F1-coloured - powder coated F-coloured - powder coated Technical Data: Opening angle Load capacity Size Diameter of cutter 180 degrees 00 kgs 0 mm mm 0
21 TECTUS TE 60 D for heavy-duty doors Descriptive text: SIMONSWERK heavy-duty hinge TECTUS TE 60 D. Completely concealed for unrebated doors with wood, steel or aluminium frames. Opening angle up to 180, Size 0 mm, right hand and left hand applicable, maintenance-free slide bearings, three-dimensionally adjustable: side and height +/- mm, depth +/- 1 mm, Finish... Block frame: No additional fixing device necessary Casing frame: With galvanised fixing plate TECTUS TE 60 D FZ Steel frame: with galvanised or stainless steel receiver TECTUS TE 60 D SZ Aluminium frame: With receiver supplied by frame manufacturer Examples of application: Casing frame Block frame Steel frame 1
22 Assembly Installation X 10 7 A B TE 60-D Affix the door part of the hinge by means of wood screws Ø 5 mm. Block frame: Drill the screw holes by using drilling jig TE 60 D and drill bit Ø mm. Affix frame part by using enclosed wood screws. Casing frame: Affix the fixing plate behind the casing, affix frame part by using enclosed screws M 5. Steel frame: Affix frame part of the hinge with the prepared receiver by using the enclosed screws M 5. Fix cover plates onto frame and door part by using the enclosed screws. Calculation of the milling width Calculation of the milling width: R1 R1 A = Groove frame width up to sealing level B = Door leaf thickness, resp. 1. door groove A B + = Measure X The result has to be a measure between and max. 5 mm. (Steel Frame: X = 5 mm) Mill with cutter Ø mm, use collar ring Ø 0 mm and select universal milling frame with milling cutter Ø X milling scheme block frame cutter Ø milling scheme sash part templates No (frame, step 1) No (frame, step ), No (door, step 1), No (door, step ).
23 Drilling jig Fixing plate / Receiver TECTUS Drilling jig TECTUS TE 60 D Casing frames Fixing plate TECTUS TE 60 D FZ 1 fixing plate galvanised, spacers (1, and mm) Steel frames Receiver TECTUS TE 60 D SZ Finish: galvanised or stainless steel Adjustment Side adjustment 1 1. Adjust the adjusting spindle 1 using Allan key mm. Twist left - towards hinge (max. mm) Twist right - towards lock (max. mm) Height adjustment 1. Wedge the door.. Slightly loosen the clamping screws.. Bring the door to the correct height.. Retighten the clamping screws. Depth adjustment 1. Slightly loosen clamping screws by using Allan key mm.. Put the door into the correct depth.. Retighten the clamping screws. 1
24 0/006/000 EDP-No.: Delivery by authorised dealers only Your SIMONSWERK partner: SIMONSWERK GmbH Bosfelder Weg 5 D-78 Rheda-Wiedenbrück Phone: + 9 (0) Fax: + 9 (0) sales@simonswerk.de Internet:
TECTUS. The completely concealed hinge system
The completely concealed hinge system index te 210 3d up to 40 kg 4 te 310 3d up to 60 kg 5 te 510 3d up to 100 kg 6 TE 525 3D up to 100 kg 7 te 630 3d up to 200 kg 8 Cable set TECTUS Accessories 9 Fixing
J; ('& ): J; )'& ): J; +'& ): J; +(+ ): J;,)& ): 9WXb[ i[j J;9JKI <_n_d] <P%' '& <_n_d] IP 7ii[cXbo 7Z`kijc[dj 9WbYkbWj_ed \ehckbwi
![J; ('& ): J; )'& ): J; +'& ): J; +(+ ): J;,)& ): 9WXb[ i[j J;9JKI <_n_d] <P%' '& <_n_d] IP 7ii[cXbo 7Z`kijc[dj 9WbYkbWj_ed \ehckbwi](/thumbs/85/92217343.jpg "J; ('& ): J; )'& ): J; +'& ): J; +(+ ): J;,)& ): 9WXb[ i[j J;9JKI <_n_d] <P%' '& <_n_d] IP 7ii[cXbo 7Z`kijc[dj 9WbYkbWj_ed \ehckbwi")
INdex ZERTIFIZIERT 4 INTERIOR DOOR SIMONSWERK TECTUS TE 210 3D for unrebated and rebated, flush-faced quality doors Hinge up to 40 kg Technical Data Load capacity Length (leaf/frame) Width (leaf/frame)
TECTUS - New Versions. New Versions. The completely concealed hinge system
TECTUS - New Versions New Versions The completely concealed hinge system index te 240 3d up to 40 kg 6 te 340 3d up to 80 kg 7 TE 540 3D up to 120 kg 8 TE 640 3D up to 200 kg 9 TE 540 3D A8 up to 100 kg
Tectus TE 680 3D FD TECTUS TE 680 3D FD. The concealed hinge system for timber entrance doors
Tectus TE 680 3D FD TECTUS TE 680 3D FD The concealed hinge system for timber entrance doors 2 Tectus TE 680 3D FD Index TECTUS TE 680 3D FD The concealed hinge system for timber entrance doors 4 Sealing
BAKA Protect Serie 2000 / Protect. BAKA Protect Series 2000 / The adjustable hinge system for timber entrance doors
Protect Serie 2000 / 4000 Protect BAKA Protect Series 2000 / 4000 The adjustable hinge system for timber entrance doors index BAKA Protect 2D BAKA Protect 2010 2D two-dimensionally adjustable up to 120
TE 526 3D Manufactured of solid stainless steel for flush commercial doors
1 TE 526 3D Manufactured of solid stainless steel for flush commercial doors Technical Details load capacity 264 lbs overall length 6.102 " width (door) 1.024 " width (frame) 1.024 " router bit Ø 3/4 "
SIKU RB. The knuckle hinge system for PVCu entrance doors
SIKU RB The knuckle hinge system for PVCu entrance doors index SIKU RB RB 5010 3D up to 120 kg drilling position 10.0 mm 4 RB 5015 3D up to 120 kg drilling position 11.5 mm 5 RB 5020 3D up to 120 kg drilling
Aluminium hinges DORMA LM. October 1999
Aluminium hinges DORMA LM October 1999 DORMA LM Engineered down to the smallest detail adaptable to any profile system The DORMA LM series of aluminium hinges has been developed to give fast, safe and
Door Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
Hahn KT-R. Butt hinge for plastic doors
Hahn KT-R Butt hinge for plastic doors For explanations of the table, please visit www.dr-hahn.com Service classes Durability Weight of test door Fire resistance Security Corrosion resistance Intrusion
Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door
K15.12 ROLLENBAND K15 DOORS
K15 DOORS 01.04.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics....03 2. Application range....03
salto safe 4028 A12 Turn-tilt windows
A12 Turn-tilt windows salto safe 4028 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. 32 9 388 88 81 - F. 32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com salto safe 4028 Contents 1. General
Fig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7
FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track
K15.13 FACE FIXED DOOR HINGES K15 DOORS
K15 DOORS K15.13 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General... K15.13.03 2. 2-part hinge...
Hardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
NEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
C13.11 HANDLES AND CONNECTION PIECES C13 SIDE HUNG WINDOWS
C13 SIDE HUNG WINDOWS C13.11 HANDLES AND CONNECTION PIECES 01.05.2014 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS
Hahn AT-G. The simple hinge for light aluminium doors. Quick secure Wide variety of uses
Hahn AT-G The simple hinge for light aluminium doors! Quick secure Wide variety of uses 2 Hahn AT-G The simple hinge for light aluminium doors Constructed of extruded aluminium well-suited to withstand
INSTRUCTIONS FOR HIT TEMPLATE FOR ALARM LOCK DL3500 MORTISE LOCK
1825 VIA BURTON ANAHEIM CA 92806 714-772-5202 / FAX 714-772-2302 EMAIL: MAIL@MAJORMFG.COM WEB: WWW.MAJORMFG.COM INSTRUCTIONS FOR HIT-66-210 TEMPLATE FOR ALARM LOCK DL3500 MORTISE LOCK WHEN USING POWER
INSTRUCTIONS FOR HIT TEMPLATE FOR BEST 34H-37H MORTISE LOCK
1825 VIA BURTON ANAHEIM CA 92806 714-772-5202 / FAX 714-772-2302 EMAIL: MAIL@MAJORMFG.COM WEB: WWW.MAJORMFG.COM INSTRUCTIONS FOR HIT-66-230 TEMPLATE FOR BEST 34H-37H MORTISE LOCK WHEN USING POWER TOOLS
INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DOOR SYSTEM (180º INSTALLATION)
INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DO SYSTEM (180º INSTALLATION) 28539 Industry Drive, Valencia, CA 91355 Toll Free Phone: (877) 728-3874 Toll Free Fax: (888) 440-9567 Phone: (661) 775-1675
SPECIAL EXTRUSIONS AND ACCESSORIES
PROFILE SYSTEM SPECIAL EXTRUSIONS s no i s u r t xe l a i c eps Import Belgium & Luxembourg Profilex s.a. 4A, Z.I. In den Allern L-9911 Troisvierges Tel: 00352/99 89 06 Fax: 00352/26 95 73 73 www.profilex-systems.com
FOLDING HARDWARE STARTEC T-SNAP G2/G4
FOLDING HARDWARE STARTEC T-SNAP G2/G4 T-SNAP G2 T-SNAP G4 Technical data: 40 kg for package throughout Height according 36+7 mm Fix bracket every 400 mm T-SNAP G2: 1x door leaf package T-SNAP G4: 2x door
HENDERSON. Securefold R-Loc Non-Mortice 100kg. Fitting Instructions for top hung exterior folding doors with NON-MORTICE HINGES SYSTEM CAPACITY
1 HENDERSON Diagram 1 TRACK FIXING (NOT BY PCH) Securefold R-Loc Non-Mortice 100kg Fitting Instructions for top hung exterior folding doors with NON-MORTICE HINGES SYSTEM CAPACITY Maximum leaf height-
Drilling jigs and accessories. Application technology made easy...
Drilling jigs and accessories Application technology made easy... INSTALLATION Drilling jigs and accessories 2 Technical amendments reserved. Edition November 2001 List of contents drilling jigs and accessories
CoFold Non-Mortice. Fitting Instructions for top hung exterior folding doors SYSTEM CAPACITY. Diagram 1. Diagram 2. Diagram 3.
1 CoFold Non-Mortice Fitting Instructions for top hung exterior folding doors Diagram 1 SYSTEM CAPACITY Maximum leaf height Maximum leaf weight Maximum leaf width Maximum leaf thickness - 3300mm - 100kg
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS HIGH PRESSUE LAMINATE (HPL) TOILET PARTITIONS 1030 TrimLineSeries 1040 DesignerSeries Includes continuous hardware option.65. IMPORTANT: Storage and Handling Information on last
Quill Stop V2 Installation Guide 11/16/2014
Thank you for purchasing the Quill Stop for the Sieg X3 (Grizzly G0463) and SX3 (Grizzly G0619) mills. Your feedback is always appreciated. Please email questions and comments to gregpriest@cox.net. What
Arriva. Concealed frame doorsets. Installation instructions
Arriva Concealed frame doorsets 1 2 Installation instructions 3 Thank you for choosing Arriva To ensure the installation process is simple and efficient we recommended you read this guide in full before
FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
INSTRUCTIONS FOR HIT LOCK MORTISER
1825 VIA BURTON ANAHEIM CA 92806 714-772-5202 / FAX 714-772-2302 EMAIL: MAIL@MAJORMFG.COM WEB: WWW.MAJORMFG.COM INSTRUCTIONS FOR HIT-66-200 LOCK MORTISER WHEN USING POWER TOOLS ALWAYS WEAR EYE AND EAR
PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS HIGH PRESSUE LAMINATE (HPL) TOILET PARTITIONS 1030 TrimLineSeries 1040 DesignerSeries Includes continuous hardware option.65. IMPORTANT: Storage and Handling Information on last
Installation Manual Flat Track Series
Manual Flat Track Series Contents Safety...1 Parts...2 Hardware.......................................... 2 Tools Required..................................... 4.............................................
Installation Manual for Metal Toilet Partitions Standard Series
For Video instructions http://www.hadrian-inc.com/tech-data/installation/toilet-partitions.aspx P a g e 1 Table of Contents Page General Notes and Tools Required 3 STEP 1: Establish Floor Bracket Locations
Barn Door & Hardware Installation Guide
Barn Door & Hardware Guide INTRODUCTION Thank you for purchasing our hardware. Our barn door and hardware will add a stunning accent to your living environment and maximize its space. This manual covers
Installation Manual for Metal Toilet Partitions Elite & Elite Plus Series
P a g e 1 Table of Contents Page General Notes and Tools Required 3 STEP 1: Establish Floor Bracket Locations 4 STEP 2: Fasten Floor Brackets 4 & 5 STEP 3: Erect Panels 6 STEP 4: Erect Wall Pilaster 7
INSTALLATION INSTRUCTION
INSTALLATION INSTRUCTION Soild Phenolic Series contents page 1080 DuraLineSeries...2-21 1180 DuraLineSeries...2-21 2080 DuraLineSeries Maximum Privacy...22-41 2180 DuraLineSeries Maximum Privacy...22-41
Universal ARCOS EA. Patch Fittings
Universal ARCOS EA Patch Fittings Product range 4 5 DORMA Universal 6 25 ARCOS Universal 26 33 DORMA EA 34 39 Accessories 40 50 Metric/English Conversion Guide 51 3 DORMA Product Range DORMA Patch fittings
INSTALLATION MANUAL FORTRESS SERIES
Guardian Security Structures TEL 1-406-212-2334 EMAIL rg@gssdoors.com WEB www.gssdoors.com FORTRESS SERIES GENERAL INSTALLATION GUIDELINES 1. The door frame is installed using 16 bolt screws 7,5 mm in
MULTI MAMMUT Heavy-duty hardware
TECHNOLOGY IN MOTION www.maco.eu ASSEMBLY INSTRUCTIONS MULTI MAMMUT Heavy-duty hardware Only for use by certified specialists! Not for end users! TILT AND TURNHARDWARE Key/abbreviations Sash rebate height
DICTATOR RTS Tube Door Closer
Tube Door Closer RTS v long DICTATOR RTS Tube Door Closer The "Invisible" Door Closer The DICTATOR RTS tube door closer is built into the door and therefore is as good as invisible. The joint can only
Organisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
An ASSA ABLOY Group company
An ASSA ABLOY Group company AS A SPECIALIST MANUFACTURER OF WINDOW ACCESSORIES FOR TOPHUNG OUTWARD PROJECTING WINDOWS, RIVALU OFFERS YOU A COMPLETE RANGE OF SOLUTIONS FOR THE CLOSING OF YOUR WINDOW IMPERVIOUSNESS
Table and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
hidden perfection SYSTEM 3
hidden perfection APPLICATIONS System 3 is the perfect solution for 360º rotating doors: TABLE OF CONTENTS FRITSJURGENS 05 Hidden Perfection 06 Perfection all around 09 Designed to stand the test of time
WINDOW TECHNOLOGY ORDER CATALOG SECTION Tilt&Turn Hardware UNI-JET D PVC
WINDOW TECHNOLOGY ORDER CATALOG SECTION 06.1 Tilt&Turn Hardware UNI-JET D PVC Table of Contents 06.1 UNI-JET D PVC 06 1 DIRIGENT T&T Handle...06.1.9 Tilt&Turn...06.1.10 Turn-Only Sash...06.1.14 Dummy-mullion
Zero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
A9S. side-fixed internal sliding system. 60kg max door panel weight. side-fixing allows for easy installation. jump-proof enclosed box-section track
A9S side-fixed internal sliding system 60kg max door panel weight side-fixing allows for easy installation jump-proof enclosed box-section track stainless steel bearings optional A9S SLIDING HARDWARE SYSTEM
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS MAXIMUM PRIVACY HIGH PRESSURE LAMINATE (HPL) TOILET PARTITIONS 2030 TrimLineSeries 2040 DesignerSeries IMPORTANT: Storage and Handling Information on last page. Review these instructions
LCD TV WALL MOUNT INSTALLATION INSTRUCTIONS. DUAL Swing Arm (RFWD-110) WARNING
INSTALLATION INSTRUCTIONS LCD TV WALL MOUNT DUAL Swing Arm (RFWD-110) WARNINGS WARNING WARNING CAUTION CAUTION The maximum weight to be installed on the RFWD wall mount is 40 lbs. (18.1 kg). The RFWD is
ARCHITECTURAL. CEAM INVISIBLE HINGES new adjustable 3D concealed hinge products for swing doors 100% made in Italy
ARHITETURAL EAM INVISILE HINGES new adjustable 3D concealed hinge products for swing doors 100% made in Italy eam oncealed Hinges by ellevue - Smart Architectural Products 3D oncealed Hinge A1029 Technical
INSTRUCTIONS FOR HIT TEMPLATE FOR SALTO XS-4 MORTISE & CYLINDRICAL LOCKS
1825 VIA BURTON ANAHEIM CA 92806 714-772-5202 / FAX 714-772-2302 EMAIL: MAIL@MAJORMFG.COM WEB: WWW.MAJORMFG.COM INSTRUCTIONS FOR HIT-66-268 TEMPLATE FOR SALTO XS-4 MORTISE & CYLINDRICAL LOCKS WHEN USING
INSTRUCTIONS FOR HIT TEMPLATE FOR SCHLAGE AD MORTISE LOCK
1825 VIA BURTON ANAHEIM CA 92806 714-772-5202 / FAX 714-772-2302 EMAIL: MAIL@MAJORMFG.COM WEB: WWW.MAJORMFG.COM INSTRUCTIONS FOR HIT-66-280 TEMPLATE FOR SCHLAGE AD MORTISE LOCK WHEN USING POWER TOOLS ALWAYS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS COMPACT LAMINATE TOILET PARTITIONS 1080 DuraLineSeries 1180 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and Handling Information
INSTRUCTIONS FOR HIT TEMPLATE FOR SARGENT MORTISE LOCKS
1825 VIA BURTON ANAHEIM CA 92806 714-772-5202 / FAX 714-772-2302 EMAIL: MAIL@MAJORMFG.COM WEB: WWW.MAJORMFG.COM INSTRUCTIONS FOR HIT-66-272 TEMPLATE FOR SARGENT MORTISE LOCKS WHEN USING POWER TOOLS ALWAYS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and Handling Information on last page. Review
IMPORTANT: installation. FLOOR ANCHORED CEILING HUNG OVERHEAD BRACED FLOOR-TO- CEILING ANCHORED
INSTALLATION INSTRUCTIONS MAXIMUM PRIVACY COMPACT LAMINATE TOILET PARTITIONS 2080 DuraLineSeries 2180 DuraLineSeries Class-A Fire Rated Includes Institutional Hardware Option.67 IMPORTANT: Storage and
PLANE Line PL 901 BASIC
Single Wing T 90 (El2 90-SaC5) Fire Resistant Steel Door PLANE Line PL 901 Plane Optic Fire Protection T90 (El2 90-SaC5) in accordance with DIN EN 1634-1 * Smoke Control RS (S 200) in accordance with DIN
hidden perfection SYSTEM ONE
hidden perfection APPLICATIONS System One is the perfect solution for 30º rotating doors and in combination with door frames: TABLE OF CONTENTS FRITSJURGENS 05 Hidden perfection 0 Heavy-duty performance
DIY GLASS BALUSTRADE AND POOL FENCING THE CHOICE IS SIMPLE
DIY GLASS BALUSTRADE AND POOL FENCING THE CHOICE IS SIMPLE SAFE STYLISH AND AFFORDABLE FOR DIY GLASS FENCE SOLUTIONS THE CHOICE IS SIMPLE Bring your outdoor areas to life with clear views and clean lines.
Heavy Duty I-Beam Trolley
Heavy Duty I-Beam Trolley ASSEMBLY INSTRUCTIONS I-BEAM TROLLEY Recommended Tools Level Tape Measure Pencil Drill with 1/8, 1/4, and 3/8, Drill Bits and Phillips Bit Socket Wrench with 9/16 Socket I-BEAM
Pet Door Panel Installation Manual
Pet Door Panel Installation Manual 400-558-1 1 4/3/03, 3:26 PM Components: Pet Door Panel Panel Latch Assembly Foam Weather-stripping Glass Sweep (4) Binding Posts (6) #6 x 1/2 Sheet Metal Screws (4) 8-32
1. TOOLS + MATERIALS REQUIRED
R INSTALLATION INSTRUCTIONS PRODUCT: BALDUR + ODEN CONFIGURATION: BI-PARTING DOOR MOUNT: TOP MOUNT Product is covered by U.S. patents. For more information visit www.krownlab.com. TOOLS + MATERIALS REQUIRED
ARCHITECTURAL. CEAM INVISIBLE HINGES new adjustable 3D concealed hinge products for swing doors 100% made in Italy
RHITETURL EM INVISILE HINGES new adjustable 3D concealed hinge products for swing doors 1% made in Italy eam oncealed Hinges by ellevue - Smart rchitectural Products bout ellevue and eam For over 3 years,
EXIT DEVICE OPERATION FIRE DOOR LABELS, STRIKES AND FRAME SCREWS FOR INFORMATION CALL OR VISIT RITEDOOR.COM
RECORD & LABELS WHAT THIS OWNER'S CAN DO FOR YOU It explains exactly how The Rite Door operates. It explains periodic maintenance requirements necessary to assure reliable operation. It explains simple
Heavy duty profiles. Heavy loads with maximum stability. Profile general overview... p Heavy duty profiles... S Load data... p.
Heavy loads with maximum stability Profile general overview... p. 366 Heavy duty profiles... S. 368 Load data... p. 372 Connection techniques... p. 374 Accessories... p. 384 Heavy duty profiles 365 Heavy
Preliminary. RP-ISO-hermetic EI 30 Fire protection structures Documentation Drawings/Instructions. Fire protection system RP-ISO-hermetic EI 30
Fire protection structures Documentation Drawings/Instructions Version 06/20 06/' Edisonstraße 4, D-5999 Bönen Tel: (+49)-(0)23 3-9 49-0 Fax: (+49)-(0)23 3-9 49-222 . General Information.. General terms
M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
![M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information](/thumbs/77/74547895.jpg "M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information")
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
SFS intec Just 3D: The new generation of adjustable hinges for flush fit doors
SFS intec Just 3D: The new generation of adjustable hinges for flush fit doors Just 3D for steel frame application +/- 2,5 mm Adjustable in height, horizontal and gasket pressure +/- 2,5 mm The increasing
Adjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
CRCODE-202. Mechanical Lock. Instruction and Programming Manual. Before Installing:
CRCODE-202 Mechanical Lock Instruction and Programming Manual Before Installing: 1. Please read the instructions carefully to prevent missing important steps. *Note: Improper installations may result in
Operating instructions. Fine boring head Ø3-88 with digital display
Operating instructions Fine boring head Ø3-88 with digital display English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety
C11.16 CHRONO ACCESSORIES C11 SIDE HUNG WINDOWS
C11 SIDE HUNG WINDOWS CHRONO ACCESSORIES 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Window stays....03
BERNINI PANIC DEVICES
BERNINI PANIC DEVICES With EC mark, in compliance with standard EN 25:2008 Exclusive Pininfarina design Complete application adaptability Fast and easy installation Functional safety and reliability Also
TITGEMEYER Tf1663GB(0514)1. GETO Megaport II flush rear doors Assembly Instructions
TITGEMEYER GETO Megaport II flush rear doors All rights reserved. The technical data quoted in this catalogue, performance descrip - tions, recommendations and instructions e.g. for the installation of
TELESCOPIC GATE MANUFACTURING AND INSTALLATION MANUAL.
TELESCOPIC GATE MANUFACTURING AND INSTALLATION MANUAL. Telescopic gates have been manufactured for many years essentially in the same way they are largely today. In recent years hardware suppliers have
Studio Face Xtreme 6020 Installation Instructions (Nickel , Black )
Packing List Face Trim (4 Pieces) (3) Hanging Brackets (9) 3/16 x 1-1/4 Masonry Screws 9/64 Drill Bit Compatibility (2) Lower Brackets w Magnets (2) Lower Facing Plates (4) 2 Drywall Screws Trim Hardware
Connector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
hidden perfection SYSTEM 3
hidden perfection APPLICATIONS System 3 is the perfect solution for 360º rotating doors: TABLE OF CONTENTS FRITSJURGENS 05 Hidden Perfection 06 Perfection all around 09 Designed to stand the test of time
QLF215 INSTRUCTION MANUAL
QLF215 INSTRUCTION MANUAL We ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We re ready to help! 1 2 3 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
Hinge Mortising Jig. One of the make it or break it parts of building a. 6 ShopNotes No. 74
Hinge Mortising Jig A Mortise for a Hinge. Quick, clean, and accurate that s the only way to describe the mortise you get with a trim router and this hinge mortising jig. One of the make it or break it
Parts list continues on Page 2 HOUSE PARTS PACKED IN HOUSE BOX PARTS IN SMALL PLASTIC BAG (HARDWARE) POST PARTS PACKED IN THIS BOX (LARGE PLASTIC BAG)
Form 05-07 Instructions and Parts List MSS- Martin Safety System NOTES: () A complete system is packed in two boxes post box and house box. House box contains hardware for both post and house assembly.
K11.13 THREE-POINT LOCKS SERIES 8400 K11 DOORS
K11 DOORS K11.13 THREE-POINT LOCKS SERIES 8400 01.04.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Three-point
1431 DOOR CLOSER WITH STANDARD DUTY ARMS (WITHOUT HOLD OPEN) INSTALLATION INSTRUCTIONS 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6
1431 DOOR CLOSER WITH STANDARD DUTY ARMS (WITHOUT HOLD OPEN) INSTALLATION INSTRUCTIONS 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6 FOR INSTALLATION ASSISTANCE, CALL SARGENT AT 1-800-727-5477 www.sargentlock.com
WSS-Sliding Door Systems - SPRINT. Flexible and exclusive. Varied solutions for single and double leaf all-glass doors.
- SPRINT Flexible and exclusive. Varied solutions for single and double leaf all-glass doors. Limited partnership, based in DE-42579 Heiligenhaus, Local court Wuppertal, HRA 20804 Personal liable partner:
Full Overlay Door Panel Preparation and Installation Instructions for 2175, 2115, CLR2160 Models
Full Overlay Door Panel Preparation and Installation Instructions for 2175, 2115, CLR2160 Models www.u-lineservice.com Phone (414) 354-0300 FAX (414) 354-7905 Service & Parts Tech Lines Phone (800) 779-2547
INSTALLATION INSTRUCTION
INSTALLATION INSTRUCTION Plastic Laminate Series contents page 1030 TrimLineSeries...2-21 1040 DesigerSeries...2-21 Urinal Screens, Benches, Shower Seats...22-31 2030 TrimLineSeries Maximum Privacy...32-47
Assembly Instructions 10 X 10 Aluminum Frame Building
Assembly Instructions 10 X 10 Aluminum Frame Building 27 97 9 8 47 36 74 52 10 10 X 10 Square Building W/ Dome Includes: The Steel Entry Door with a Dead Bolt Lock assembly and Aluminum Door Frame. Metal
TECHNOLOGY IN MOTION MACO TILT AND TURN FITTINGS. MULTI POWER fully concealed fittings INSTALLATION INSTRUCTIONS
TECHNOLOGY IN MOTION MACO multi-matic TILT AND TURN FITTINGS INSTALLATION INSTRUCTIONS Key Sash rebate height Sash rebate width Tilt-only window 50 kg Maximum sash weight 2 Contents Applications/processing
Installation Instructions
for s TOC Table of Contents 1 Mortise Lock Handing Instructions.... 2 2 3 4 5 Mortise Lock Door Preparation & Installation... 3 HSS Trim Installation.... 5 Knob x Knob...6 Lever x Knob....7 Turn-Piece
Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides
Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides Application example linear systems, drives and accessories 1 2 3
Modular clamping and positioning system for milling machines and machine tool. flexible
Modular clamping and positioning system for milling machines and machine tool flexible Titan 125 Everything under control The new Allmatic TITAN 125 high pressure vice combines virtually all the features
Cabonyx Installation Manual
Cabonyx Installation Manual Content Deck-Nyx and Plan-Nyx Installation Page 1 Flooring Products Page 1 Accessories Page 1 Installation Tools Page 2 Preparing Sub-structure Page 2 Installation Page 4 Cautions
x2 1/4 (6mm) Floor Anchor
INSTALLATION GUIDE Main Components x1 Rail x5 Wall Spacer x2 Anti-jump Block x2 Straight Strap x1 Right Stopper x1 Left Stopper x5 5/16 (8mm x 60mm) Carriage Bolt x5 5/16 (8mm x25mm) Anchor x5 5/16 (8mm
GlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
Required Tools: Suggested Additional Tools: 1 Cordless Drill with Robertson Bits 1 Ratchet Wrench 1 7/16 or 11mm socket 1 7/16 or 11mm Gear Wrench
Thank you for your recent purchase of a Cabinets by Hayley garage cabinet system. You are about to experience the best made cabinets that you can purchase. Cabinets by Hayley are designed for beauty and
XL JOINERY LTD LA PORTE VISTA MODULAR 3 ASSEMBLY INSTRUCTIONS
XL JOINERY LTD LA PORTE VISTA MODULAR 3 2090mm High x 4687mm Wide ASSEMBLY INSTRUCTIONS READ AND UNDERSTAND THESE INSTRUCTIONS FULLY PRIOR TO STARTING INSTALLATION. IT IS STRONGLY RECOMMENDED THAT A COMPETENT
Alfresco LIVING. Just got better DESIGNERLINE PRODUCT RANGE QUEENSLAND
Alfresco LIVING Just got better DESIGNERLINE PRODUCT RANGE QUEENSLAND Introducing Dowell DESIGNERLINE WINDOWS AND DOORS RANGE - 2 - Dowell DesignerLine Bi-fold Door and Window Opened European Hinge System