QUOTATION FOR THE INTERIOR FURNISHING WORK OF BANK OF INDIA, BALARAMAPURAM BRANCH.

Size: px

Start display at page:

Download "QUOTATION FOR THE INTERIOR FURNISHING WORK OF BANK OF INDIA, BALARAMAPURAM BRANCH."

Noel Franklin
6 years ago
Views:

1 QUOTATION FOR THE INTERIOR FURNISHING WORK OF BANK OF INDIA, BALARAMAPURAM BRANCH. Date:- Si.No. Description of work Qty Units Rate Amount I DOORS & PARTITIONS :- 1 FULLY GLAZED FULL HEIGHT PARTITION WITH DOOR (Entrance door & partition to the Bank, Front side partition of Manager's cabin, (Entrance door to the Currency chest area) :- Providing & fixing fully glazed full height partition with 8 mm thick float glass fixed (with Teakwood beading of melamine clear glossy finish) to the double skin partition made of hard-wood frame work of size :-2"x 2"(2'0" c/c) & 6 mm thick BWR grade & pattern on both sides. The glazed portion is up to the height of 7'0" and balance up to false ceiling is double skin partition of 1 mm thick laminate finish as per the design. The glazed portion of the partition & door shall be provided with frosted film/ etching & Bank loggo of coloured vinyl sticker as per the design given in the detailed drawing. Provide fully glazed door made of 5"x2" size Teakwood frame of 1 mm thick laminate finish & 8 mm thick float glass fixed with Teakwood beading of melamine clear glossy finish as per the design given in the detailed drawing. The doors to be fixed with door closer, brush steel mortise handle & lock, door stopper of approved make as per the material specification. (Note:- In case of false ceiling, the vertical hardwood members to be fixed with RCC ceiling but the area of the partition payable will be below the false ceiling only). Door opening size:- 3'4" x 7'0" x 1 No. for the Entrance door to the Bank Door opening size:- 3'0" x 7'0" x 1 No. for Manager's Cabin Door opening size:- 2'6" x 7'0" x 2 Nos. Entrance door to the Currency chest area with SS handle of 300 mm long 'C' shaped SS handle of brush steel finish. 355 SFt. 2 PARTLY GLAZED FULL HEIGHT PARTITION WITH DOOR (2 sides of Manager's cabin, partition near stair case to the Currency chest area & partition for cash sorting/packing /counting /strapping room at Currency chest area):- Providing & fixing partly glazed full height partition with 6 mm thick float glass fixed (with Teakwood beading of melamine clear glossy finish) to the double skin partition made of hardwood frame work of size :- 2"x 2" (2'0" c/c) & 6 mm thick BWR grade & pattern on both sides.

2 The glazed portion is from 3'0" to 7'0" height & it is provided with frosted film/etching as per the design given in the detailed drawing. Provide partly glazed door made of 5"x2" size Teakwood frame of 1 mm thick laminate finish & 6 mm thick float glass fixed with Teakwood beading of melamine clear glossy finish as per the design given in the detailed drawing. The glazed portion of the partition & door shall be provided with frosted film/ etching & Bank loggo of coloured vinyl sticker as per the design given in the detailed drawing. The doors to be fixed with door closer, brush steel mortise handle & lock, door stopper of approved make as per the material specification. (Note :- In case of false ceiling, the vertical hardwood members to be fixed with RCC ceiling but the area of the partition payable will be below the false ceiling only). Door opening size:- 3'0" x 7'0" x 3 Nos. for Staircase area & cash sorting/packing /counting /strapping room Door opening size:- 2'6" x 7'0" x 1 No. for side partition of Manager's Cabin 660 SFt. 3 PARTLY GLAZED PARTITION (Side partition - 7'0" height - of Cash cabin with door & Low height partition - 4'0" height - inbetween Officer's seating) :- Material & finish same as Item No: I (2) except the glass portion. Provide 8 mm thick float glass (insted of 6 mm thick float glass) fixed with Teakwood beading of melamine clear glossy finish as per the design given in the detailed drawing. Necessary cutouts (5" gap) to be provided for the glass of Cash cabin as per the design. All the exposed edges of the glass should be mirror polished. The glazed portion of the partition & door shall be provided with frosted film/ etching & Bank loggo of coloured vinyl sticker as per the design given in the detailed drawing. The doors to be fixed with door closer, brush steel mortise handle & lock, door stopper of approved make as per the material specification. Door opening size:- 2'6" x 7'0" x 1 No. 135 SFt. 4 FULLY BLOCKED FULL HEIGHT DRYWALL PARTITION WITH GYPSUMBOARD :- (Record room, Dressing room, Pantry & UPS/ Battery room) :- Providing & fixing full height Dry wall partitions using single layer of 12 mm thick tapered edge Gypboard on either sides screw fixed to light weight cold rolled metal sections as per Companys specifications including applying of two coats of plastic emulsion paint after tapering & puttying the joints and edges. Also provide door openings as per the measurement. 495 SFt.

3 5 FLUSH DOORS WITH TEAKWOOD DOOR FRAME :- Supply & fixing of doors with vision glass made of Teak-wood frame (size :- 5"x2") of 1 mm thick laminate finish & 6 mm thick float glass fixed with Teakwood beading of melamine clear glossy finish as per the design given in the detailed drawing. Also provide Teakwood door frame of size: 3"x4" over 3 sides of the door opening. All Teakwood surface to be polished with melamine clear glossy finish. The doors to be fixed with door closer, brush steel mortise handle & lock, door stopper of approved make as per the material specification. i Door opening size:- 3'6" x 7'0" x 2 Nos. (Currency chest & Guard's resting room) 2 No ii Door opening size:- 3'0" x 7'0" x 2 Nos. (Pantry & Record room) 2 No iii Door opening size:- 2'6" x 7'0" x 2 Nos.(UPS & Dressing room) 2 No 6 ALUMINIUM SINGLE SKIN PARTITION (Inside the Strong room):- II Partition (7'2" height) made of Powder coated Aluminium frame work & 12 mm thick prelaminated particle board including 1no.door with handle, lock, door stopper, door closer etc. Door opening size :- 3'6" x 7'0" Ht. 90 Sft FURNITURE:- 1 STAFF TABLES:- Providing & fixing of staff tables made of 19 mm thick BWR grade plywood on top and all sides finished with 1 mm thick lamination of approved colour & pattern as per the design comprising of the following complete in all respects. a) Table top & all vertical sides are made of 19 mm thick BWR grade & make. All exposed edges of plywood to be finished with b) Drawer units are provided with draw channel, multi purpose lock, 4" long brush steel handle, approved make as per the material secification. All exposed edges of plywood to be finished with c) Computer key board tray with soft palm (Ebco-KPS 45), cable organizer & CPU stand of Ebco make shall be fixed in position. d) Footrest made of Teakwood member of size: 4" x 1 1/2" finished with melamine clear glossy finish. e) Boxing made of 12 mm thick BWR grade plywood below the table top for electrical coduting & at the bottom for the LAN cabling/ telephone wiring. f) All inside portions to be painted with primer and 2 coats of enamel paint of approved make & colour.

4 i Manager's table :- 6'0" x 3'0" x 2'6" Ht. 1 No ii Officer's table :- 5'0" x 2'6" x 2'6" Ht. 3 No iii Officer's table :- 4'0" x 2'0" x 2'6" Ht. (Cash sorting rooom) 1 No iv Dafthri/Gold appraiser's table :- 4'0" x 2'6" x 2'6" Ht. (without keyboard pullout & CPU stand) 2 No 2 FRONT OFFICE COUNTER:- Providing & fixing of Front office counter made of 19 mm thick BWR grade plywood on top and all sides finished with 1 mm thick lamination of approved colour & pattern as per the design comprising of the following complete in all respects. a) Table top & all vertical sides are made of 19 mm thick BWR grade & make. All exposed edges of plywood to be finished with b) Provide 3'10" high boxing made of 19 mm thick BWR grade & pattern as per the design. Also provide a vision glass of 6 mm thick fixed with Teakwood beading of melamine clear glossy finish at the front side & rear side with service door as per the design. c) Provide 1'4" height glazed partition above the transaction top. The glass shall be of 12 mm thick etched, edge polished glass fixed with SS D' bracket of approved make as per design. d) Drawer units are provided with draw channel, multi purpose lock, 4" long brush steel handle, approved make as per the material secification. All exposed edges of plywood to be finished with e) Computer key board tray with soft palm (Ebco-KPS 45), cable organizer & CPU stand of Ebco make shall be fixed in position. f) Footrest made of Teakwood member of size: 4" x 1 1/2" finished with melamine clear glossy finish. g) Boxing made of 12 mm thick BWR grade plywood below the table top for electrical coduting & at the bottom for the LAN cabling/ telephone wiring. h) All inside portions to be painted with primer and 2 coats of enamel paint of approved make & colour. Front office counter Size :- 27'0" x 3'0" x 2'6" Ht. 27 RFt.

5 3 CASH COUNTER:- Providing & fixing of Front office counter made of 19 mm thick BWR grade plywood on top and all sides finished with 1 mm thick lamination of approved colour & pattern as per the design comprising of the following complete in all respects. a) Table top & all vertical sides are made of 19 mm thick BWR grade & make. All exposed edges of plywood to be finished with b) Cash transaction counter top shall be provided with 12 mm thick edge polished toughened & frosted glass fixed with Teakwood beading of melamine clear glossy finish. Also the vertical facia of 1'4" height shall be provided with 12 mm thick edge polished toughened & frosted glass fixed with SS D' bracket. c) The glazed partition above the Cash transaction counter top shall be provided with 12 mm thick edge polished clear glass fixed SS D' bracket to the 10"x 10" boxing. Also provide a slit of 4 " inbetween 2 glasses as per the design. (1'0" ht. glass, 4" gap & then 1'6" glass) d) Provide 7'7" high boxing (10'x10') over 3 sides of the cash counter made of 19 mm thick BWR grade plywood finished with 1 mm thick lamination of approved colour & pattern as per the design. Also provide a vision glass of 6 mm thick fixed with Teakwood beading of melamine clear glossy finish at the front side & rear side with service door as per the design. e) Provide 1'4" height glazed partition above the transaction top. The glass shall be of 12 mm thick etched, edge polished glass fixed with SS D' bracket of approved make as per design. f) Drawer units are provided with draw channel, multi purpose lock, 4" long brush steel handle, approved make as per the material secification. All exposed edges of plywood to be finished with ` g) Computer key board tray with soft palm (Ebco-KPS 45), cable organizer & CPU stand of Ebco make shall be fixed in position. h) Footrest made of Teakwood member of size: 4" x 1 1/2" finished with melamine clear glossy finish. i) Boxing made of 12 mm thick BWR grade plywood below the table top for electrical coduting & at the bottom for the LAN cabling/ telephone wiring. j) All inside portions to be painted with primer and 2 coats of enamel paint of approved make & colour.

6 Cash cage working top = 5'6" x 3'0" x 2'6" Ht. & Cash transaction counter top = 5'6" x 1'4" x 3'8" Ht. 1 No 4 SIDE CREDENZA :- Providing & fixing side storage made of 19 mm thick BWR grade plywood on top and all sides finished with 1 mm thick lamination of approved colour & pattern as per the design. Provide sliding shutters with recessed sliding channels & recessed SS handle of Ebco make. Also provide one shelf inside the storage. All exposed edges to be finished with Teakwood beading of melamine clear glossy finish. All inside portions to be painted with primer and 2 coats of enamel paint of approved colour. Size:- 3'0" x 1'4" x 2'6" Ht. 6 No 5 LOW HEIGHT STORAGE (Manager's cabin):- Providing & fixing low height storage made of 19 mm thick BWR grade plywood on top and all sides finished with 1 mm thick lamination of approved colour & pattern as per the design given in the detailed drawing. Provide sliding shutters with Ebco recessed sliding channels, Ebco recessed SS handle, Ebco mortise lock & SS tower bolt inside as per the design. Also provide one shelf inside the storage with 19 mm thick BWR grade plywood. All exposed edges finished with Teakwood beading of melamine clear glossy finish. All inside portions to be painted with primer and 2 coats of enamel paint of approved colour and pattern as per design. Size:- Total Length x 1'4" x 2'6" Ht. 25 SFt. 6 FULL HEIGHT STORAGE (Banking hall & Guard's resting room):- Providing & fixing full height storage made of 19 mm thick BWR grade plywood on all sides finished with 1 mm thick lamination of approved colour & pattern as per the design given in the detailed drawing. Provide openable shutters with Ebco auto closing hinges, 4" long SS brush steel handle, Ebco mortise lock & SS tower bolt inside as per the design. Also provide shelves inside the storage with 19 mm thick BWR grade plywood. All exposed edges finished with Teakwood beading of melamine clear glossy finish. All inside portions to be painted with primer and 2 coats of enamel paint of approved colour and pattern as per design. Size:- Total Length x 1'4" x 7'0" Ht. 185 SFt. 7 WRITING LEDGE WITH CHEQUE DROP BOX & SUGGESTION BOX :- Made of 19 mm thick BWR grade plywood on top and all sides finished with 1 mm thick lamination of approved colour & pattern as per the design. Ledger top shall be provided with 12 mm thick edge polished clear glass fixed with SS studs as per design.

7 The Cheque drop box & suggestion box are provided with a slit opening & an openable shutter with lock as per the design. Also the boxes are provided with vision glass with 6 mm thk. float glass fixed with with Teakwood beading of melamine clear glossy finish Size:- 4'0" x 1'4" x 3'8" Ht. 1 No 8 COUNTER TABLE (Inside the Cash sorting room - Currency chest):- Providing & fixing counter table made of Teakwood member of size: 2"x 2" as frame & 19 mm thick BWR grade plywood on top fixed to the Teakwood frame. Counter top shall be provided with 20 mm thick Edge polished Black Granite slab as per the design. All Teakwood surface to be polished with melamine clear glossy finish. Provide one shelf inside as per the requirement. Also provide intermediary support (vertcally & horizontally) with hardwood member at an interval every 3'0". Size:- 15'0" x 3'0" x 2'6" Ht. 15 RFt. 9 PANTRY COUNTER:- Providing & fixing Pantry counter made of 19 mm thick BWR grade plywood & Counter top fixed with 20 mm thick Edge polished Black Granite slab as per the design. All exposed edges of the plywood to be finished with with Teakwood beading of melamine clear glossy finish & inside portions to be painted with primer and 2 coats of Enamel paint of approved colour & make. (Inside the Pantry & Guard's resting room) Size:- 8'0" x 1'6" x 2'6" Ht. x 2 Nos. 16 RFt. 10 DRESSING TABLE WITH MIRROR (Inside Strong room) :- Made of 19 mm thick BWR grade plywood on top and all sides finished with 1 mm thick lamination of approved colour & pattern as per the design. Provide Mirror of size: 1'4 x 4'0" Ht. fixed to 19 mm thick BWR grade plywood with SS studs as per the design given in the detailed drawing. 1 No 11 MIRROR UNIT (Currency Chest) :- Providing & fixing of 4 mm thick mirror on 19 mm thick BWR grade plywood back panelling and all 4 sides are provided with Teakwood frame of size 2" x 1" of melamine clear glossy finish. The mirror unit has to fixed in position as shown in the Layout. Note:- The cost shall be inclusive of all necessary hardware fittings for fixing the mirror unit to the wall) Size:- 3'0" x 7'0" Ht. 4 No

8 12 BED (Guard's resting room):- Providing & fixing Bed made of Teakwood member of size: 2"x4" as frame, 2"x2" as leg & 19 mm thick BWR grade plywood on top fixed to the Teakwood frame as per the design. All Teakwood & plywood surface to be polished with melamine clear glossy finish. Also provide horizontal support with hardwood member at an interval of every 2'0". Size:- 3'0" x 6'8" x 1'6" Ht. 4 No III OTHER WORKS :- 1 FALSE CEILING:- (Note :- Rate shall be inclusive of any vertical part, cut outs for spot light, CFL fittings, A/C grills, fire and security systems, trap door etc. including painting with primer & 2coats of plastic emulsion of approved colour) i GYPSUM BOARD FALSE CEILING :- Providing & fixing of 12.5 mm thk Gypboard false ceiling of 18 guage GI frame work at the distance of 60cm c/c ( maximum) both ways strictly as per the specification of Saint Gobain including painting with primer & 2coats of plastic emulsion of approved colour) 1400 SFt. ii ARMSTRONG GRID FALSE CEILING :- Providing and fixing in position False Ceiling in Armstrong 600 x 600 mm x 15/16 mm Dune Supreme RH99 Prima tile with Regular edge framework as specified by Armstrong with suspenders wherever required. 420 SFt. 2 PILLAR PANELLING :- Providing & fixing pillar panelling with hardwood frame work of size:- 2"x 2" (2'0" c/c) & 6 mm thick BWR grade plywood finished with 1 mm thick lamination of approved colour & pattern as per the design given in the detailed drawing. (Note:-Area of the panelling payable will be below the false ceiling only). 3 WICKET GATE :- Made of double layer of 19 mm thick BWR grade plywood finished with 1 mm thick lamination of approved colour & pattern on both sides as per the design. The wicket gate has to be fixed with hinges & SS tower bolt. All the exposed edges are finished with Teakwood beading of melamine clear glossy finish 450 SFt. Size:- 3'0" x 2'6" Ht. 8 SFt. 4 VERTICAL BLINDS ( Inside the Banking hall):- 100 mm wide vertical blinds Vista levelor / Mac having top rail 39 x 34 mm(1.2 mm thick). The fabric shall be of viscose / polyster / yarn as per approval. 210 SFt.

9 5 NOTICE BOARD :- Providing & fixing soft board claded with fabric of approved shade and quality over 19 mm thick BWR grade plywood with 2.5"x 1" thick beechwood frame of melamine clear glossy finish & 6 mm thick glass shutter with necessry hardware fittings as per the design given in the detailed drawing. Size :- 4'0" x 3'0" Ht. 1 No 6 PAINTING :- i Painting the Banking hall wall area with two coats of plastic emulsion paint of approved make and colour after applying primer and putty SFt. ii Painting the Rolling shutter, collapsible gate, window grills etc. iii with two coats of Enamel paint of approved make and colour. 850 SFt. Painting the non- Banking hall with two coats of OBD paint of approved make and colour SFt. TOTAL COST - PART - A : INTERIOR FURNISHING WORK Rupees:- Note:- Collapsible gate at the Entrance of the Bank & Currency chest, Flooring, Visitor's seating etc. are not included in this Estimation.

Description of Item Unit Quantity

Description of Item Unit Quantity Page 1 of 6 a) Façade of Entrance Door (Refer Drawing 11) Providing and fixing in place Aluminum Composite Panel Cladding of approved quality / shade / colour / make (Euroband / Altobond / Alucobond) per