S.NO Description Quantity Rate Amount

Size: px
Start display at page:

Download "S.NO Description Quantity Rate Amount"

Transcription

1 INTERIOR WORKS NANDIMANDALAM BRANCH S.NO Description Quantity Rate Amount 1 Full height partition with laminate finish and glass. Providing & fixing partly glazed partly paneled Dry Wall Partition with metal studs & comprising of the following: i) Frames : a) Supporting system comprising of India Gypsum / Boral, factory made Metal studs of 51 mm x 35mm x 0.50mm placed horizontally and vertically at 600mm c/c.metal tracks of 51mm x 36mm x 0.50mm in size shall Be fixed at floor, middle, door and ceiling levels with staggered joints to avoid through joints. All vertical members should touch the ceiling with horizontal ceiling channel at beam / slab. b)rate to include necessary strengthening with additional studs / tracks or channels at doors or other openings wherever required and as directed. ii) Panels : a) 9mm BWR Plywood finished with 1mm laminate in approved colour on Both sides as shown in the drawing. b) 8mm thick clear float glass with etching design fixed as in the drawing between 900mm to 2100mm level in specified areas with 100mm x 15mm beach wood jamb and 12mm x 12mm beach wood beading. iii) Finish with melamine polish :

2 2. All exposed surfaces of beach wood or teak wood sections should be finished melamine spray polish after properly preparing surface and as directed. Partitions shall be firmly fixed to the ground, walls, roof / ceiling by means of screws and concealed brackets. Partitions shall be erected in perfect line and level both horizontally and vertically. Doors in partitions with glass: Providing & fixing partly glazed / partly paneled doors with beach wood / teak wood frames and comprising of the following : a) Door frames : The outer door frame work shall be with well seasoned beech / teak wood Sections 100mm x 25mm in finished Size placed vertically and horizontally As shown in the drawing. b) Door shutter : The door shutter shall be 32mm solid Core flush door bonded with phenol formal-de-hide finished on both sides with 1mm laminate in approved colour on both sides also providing a glazed panel as shown in the drawing with 8mm thick plain float glass with etching as per approved design fixed 50mm x 25mm beech / teak wood jamb and 12mm x 12mm beach / teak wood beading. c) Door hard ware : Each door shutter shall be provided and fixed with hinges, tower bolts, door stoppers, mortice lock, handles ( brass lacquer finished international quality), door silencer all as per approved samples by bank. 50 Sqm

3 3 d) Finish with melamine polish : All exposed surfaces of beach wood or teak wood sections shall be finished with melamine spray polish after property preparing surface and as directed. Low height partitions Factory made : Providing & fixing free standings factory made Low Height Partitions with metal frames & comprising of the following. i) Frames : a) Supporting system comprising of custom made aluminum extruded section minimum 65mm wide and 2mm thick profiles powdered coated in approved colour. The bottom member shall be 100mm skirting section with height adjustments levelers and self locking arrangement. The frames structures shall have nuts and bolts with blind revert constructions. ii) Wire Management System : The partition shall have concealed, easily accessible wire management ducts for running electrical, networking and communication cables / wires at different levels without having any interference with provision of easily removable and easily refixable panels on either sides. iii) Top and Side Edges : The top and other exposed edges of the partition shall be covered either with powered coated aluminum extruded section with half round die 7 Sqm

4 4 cast corner & center caps to avoid sharp edges or aluminum trims fitted with injection moulded ABS caps. iv) Panels : a) 12mm MDF / pre-laminated particle boards or 9mm plain particle / MDF boards finished with 1mm laminate in approved colour on both sides fixed with spring clip mechanism. b) 5mm thick clear float glass with etching design fixed as per approved design self locking snap fitting system with spring clip mechanism. c) Pin up boards with 12mm jolly soft boards finished with upholstery cloth (Rs.95/- per mts.) on both sides without any loose or wrinkles fixed with spring clip mechanism placed as directed. False ceiling (Gyp-board) : Providing and fixing False ceiling with Gyp-Board tiles and metal frames as under: a) The basic frames shall be formed with G.I. sheet section as main C Trunking measuring 50 x 19 x 12mm formed out of 24 Gauge G.I. metal sheets placed at 1200mm c/c with cross & sub-channels furring measuring 50 x 19 x 19mm formed out of 26 gauge GI metal sheets. The cross and sub channels shall be fixed to the main trunking by means of sheet metal screws at 1200mm / 60mm centers in both directions to form a grid of 1200 x 600mm b) The main trunking shall be suspended by means of adjustable hangers of 6mm dia rods, L Clamps, holding clamps etc fixed with metal 5 Sqm

5 5 fasteners in the roof, double check nuts for level adjustments. The wall runner shall be out of 24 gauge G I sheet 25 x 25mm in size and shall be fixed to the wall with screws. c) Providing & fixing 12.50mm thick Gyp Board / tiles to the frames with sheet metal screws and finishing the entire surface neat, smooth and in perfect line and level as directed. d) Applying two coats of plastic emulsion in approved colour to the ceiling. Rate to include provision for cutting opening, providing additional frames to accommodate lighting fixtures, a.c. grills providing steps, vertical off sets etc.all complete as directed. 150 Sqm Low Height Storage Units: Providing & Fixing low height (around 900mm) factory made storage racks or up to window sill level or as directed, 450mm deep and comprising of the following: a) The basic structure including top, bottom, sides shelves and shutters shall be made out of 18mm BWP/BWR block board except for top which shall be 25mm thick particle board /MDF with post formed round edges. The exposed of the block board shall be machine covered PVC TAPE edge beading. b) The exposed portions of storage rack including sides and the shutters shall be finished with 1.0mm laminate in approved colour duly fixed with fevicol. c) The baking shall be with 18mm

6 6. BWR ply / MDF laminated finish on both sides. A middle shelf with 18mm BWR ply / MDF shall be fixed at desired height as directed by bank / consultant. d) The shutters shall be fixed with concealed cabinet auto closing hinges, a multipurpose cup board lock, tower bolt, ball catcher, handles etc all as approved. f) All internal un exposed portions of the storage rack shall also be finished with laminated finish in approved colour. g) Skirting and base frames shall be fixed at the bottom of the storage racks. The skirting shall be finished with 1.0mm laminate in approved colour. Counters cum workstation for Single Window Operations. Providing & Fixing factory made counters cum work stations for single window operations for two operators and one passing officer 1500mm long x 1050mm wide x 750mm high with basic structure of 18mm BWR plywood and laminated finish 25mm thick post formed table tops as per details shape, size and design shown in the drawing and comprising of the following : a) Low height partition 1500mm high and in various lengths all same as detailed under item no 5 with necessary beech / teak wood jamb, capping etc. all complete as per drawing. 10 Sqm Side partions- 4nos. Back partion 2 nos

7 Rear side doors 2 nos with Locking arrangement. b) Working tables 1500mm x 1050mm made with 25mm BWR plywood with post formed top and 18mm BWR plywood for sides finished with 1.0mm laminate in approved colour, - 2 nos Side tables 400mm x 1200mm with 25mm BWR plywood with post formed top and 18mm BWR plywood for sides finished with 1.0mm laminate in approved colour 2 nos. The table and side tables shall have following accessories: 3 nos of drawer units with 3 drawers each including all hardware items like telescopic drawer metal channel, handles, auto closing, drawer lock etc all complete. 3 nos of CPU stand made out of 18 BWR plywood and 1.0mm laminate. 3 nos cupboard units with shutter made out of BWR plywood and finished with 1mm laminate and necessary hardware like cabinets hinges, locks, handles etc all complete. 7 3 nos of dural make powder coated in approved colour for glass openings. 3 nos of moulded ready made key board tray with metal channel etc. 1 Unit c) All the internal, external and exposed surfaces of the counters

8 tables including top, side partition, drawer shutters etc.shall be finished with 1.0mm laminate of approved colour, make and design etc. d) All exposed surfaces of beech wood moldings sections shall be finished with melamine spray polish after properly preparing surface and as directed all other concealed surfaces like inside of the drawers, cabinet and shutters etc. shall be finished with two coats of enamel paint in approved colour over a coat of printer. (1 unit = 2 operator seats,case manager ) Table for Branch Manager with side rack / table i) Providing and laying table including side rack for Branch Manager of size 1800 x 850 x 750mm as detailed under a) Basic structure with 25mm BWR plywood / MDF Boards for top post formed and finished with laminate with approved colour and shape 18mm BWR plywood for all sides, verticals, modesty panels, side rack and shutters. b) Two drawer box with a shallow drawer, one drawer one cup board with shelf and shutter in side rack. The drawers shall be fixed with telescopic metal channels and the shutters with cabinet hinges, locks, handles etc. c) The table top post formed, modesty panel and all other exposed surfaces to be finished with 1mm thick laminate of approved colour, matching grains and design. All edges of the plywood/ block board shall be covered with beech /teak

9 8. wood decorative beading as approved by bank. d) Table shall be fixed with a foot rest made out of Sal wood 100mm x 50mm section and polished. Sliding tray factory made Key board with metal telescopic sliding channels. e) One side table / rack 1200 x 450x 750mm with shutters made out of 18mm BWR plywood for 18mm BWR plywood for sides, shutters etc. finished with 1mm laminate in approved colour. 25mm BWR plywood/ MDF boards for top post formed and finished with laminate in approved colour and shape. f) All the internal and external and exposed surfaces of the counter including top, side partitions, drawers, shutters etc. shall be finished with 1mm laminate in approved make and design and colour etc. g) The edge of the table shall be finished with 35mm x35mm beading of beech wood sections and lipping for all ply/ block board shall be with 18mm x6mm beech wood beading and shall be finished with melamine spray polish after properly preparing surface and as directed by Bank. h) All other concealed surfaces like inside of the drawers & cabinet and shutters etc. shall be finished with two coats of enamel paint in approved colour over a coat of primer. 1 No 2 Nos ii) Officer table with side rack 5 length and other specification done by BM table.

10 Glazed entrance door: Providing and fixing fully glazed panels /partitions and doors with powder coated aluminium frames, glass and comprising of the following: Fixed panels: a)aluminium extruded rectangular tube sections (Jindal Cat # 4616) of size x 44.5 x 3.18 mm placed vertically and horizontally to provide wider and bigger glass. b)the skirting section shall be aluminium extruded rectangular tube section measuring x x 3.18mm. c)heavy duty snap on clips/glazing clips for fixing glass panels along with rubber gaskets. d)the panels shall be with 8mm thick plain clear float glass with etching as per approved design fixed with heavy duty snap on clips/ glazing clips and rubber beading. Doors: 3 Sqm 4.50Sqm a) Door verticals with aluminium extruded rectangular tube sections ( Jindal Cat # 4524) measuring 83.5 x 44.5 x3.50mm. Fixed glazing in front with door: b) The top and bottom members shall be aluminum extruded rectangular tube section ( Jindal Cat # 4529) measuring x 44.50x 3.18mm. c)the panels shall be with 8mm thick plain float glass

11 etched in pattern and design as approved and fixed with heavy duty snap on clips/ glazing clips and rubber gasket. d) Heavy duty aluminium tower bolt, brass bead lock, door stoppers, aluminum handles as per approved size, shape and design fixed to each shutter as directed. e) Providing and fixing floor spring hinged to each shutter of approved make. f) Partition and door frames including all aluminium sections, screws, aluminium hardware etc. all shall be powder coated in approved colour. Partition Doors with floor spring hinges Note:- Rates quoted are inclusive of taxes

CHAITANYAPURI interior works BOQ

CHAITANYAPURI interior works BOQ SCHEDULE OF FINAL BILL OF QUANTITIES INTERIOR WORKS CHAITANYAPURI BRANCH (20876) REGION -2 (DILSUKHNAGAR REGION) S. No Item/Particulars. Quantity Unit Rate/Unit Amount 1.1 FULL HEIGHT PARTITIONS: Providing

More information

INDICATIVE PRICE BID FOR FURNISHING WORKS AT UZHAMALAKKAL BRANCH (NEW PREMISES) (FOR INFORMATION ONLY - NEED NOT BE FILLED UP)

INDICATIVE PRICE BID FOR FURNISHING WORKS AT UZHAMALAKKAL BRANCH (NEW PREMISES) (FOR INFORMATION ONLY - NEED NOT BE FILLED UP) INDICATIVE PRICE BID FOR FURNISHING WORKS AT UZHAMALAKKAL BRANCH (NEW PREMISES) (FOR INFORMATION ONLY - NEED NOT BE FILLED UP) S.No Description Qty Unit Rate Amount 1 SINGLE WINDOW SYSTEM: 12 Rmt Providing

More information

28.00 Rmt sqm sqm

28.00 Rmt sqm sqm SEALED BID FORMAT FOR THE INTERIOR FURNISHING WORKS AT SBI CHALAKUDY BRANCH. Sl No. Description of item Quantity Unit Rate Amount 1 Counter Table :- The width and height of the table is 100cm and 75cm

More information

BOQ FOR INTERIOR & FURNISHING WORKS FOR STATE BANK OF INDIA BRANCH 74, JANPATH

BOQ FOR INTERIOR & FURNISHING WORKS FOR STATE BANK OF INDIA BRANCH 74, JANPATH BOQ FOR INTERIOR & FURNISHING WORKS FOR STATE BANK OF INDIA BRANCH S.NO DESCRIPTION FLOORING / WALL TILES WORKS 74, JANPATH 1 Vitrified tile flooring SQM 10 Providing and replace broken Vitrified Tiles

More information

Description of Item Unit Quantity

Description of Item Unit Quantity Page 1 of 6 a) Façade of Entrance Door (Refer Drawing 11) Providing and fixing in place Aluminum Composite Panel Cladding of approved quality / shade / colour / make (Euroband / Altobond / Alucobond) per

More information

as above specification without front glass. STATE BANK OF INDIA CATHOLIC CENTRE, ALUVA BRANCH (EXISTING PREMISES)

as above specification without front glass. STATE BANK OF INDIA CATHOLIC CENTRE, ALUVA BRANCH (EXISTING PREMISES) STATE BANK OF INDIA CATHOLIC (EXISTING PREMISES) Name of work Sealed bid format for the renovation of Catholic centre branch, Aluva Name and address of the contractor 1 Providig and fixing single window

More information

QUOTATION FOR THE INTERIOR FURNISHING WORK OF BANK OF INDIA, BALARAMAPURAM BRANCH.

QUOTATION FOR THE INTERIOR FURNISHING WORK OF BANK OF INDIA, BALARAMAPURAM BRANCH. QUOTATION FOR THE INTERIOR FURNISHING WORK OF BANK OF INDIA, BALARAMAPURAM BRANCH. Date:- Si.No. Description of work Qty Units Rate Amount I DOORS & PARTITIONS :- 1 FULLY GLAZED FULL HEIGHT PARTITION WITH

More information

BOQ /Bill of Quantities for Interior Furnishing of Bank of India; BO: BAGH MUGHALIA-BHOPAL with Details of Specification.

BOQ /Bill of Quantities for Interior Furnishing of Bank of India; BO: BAGH MUGHALIA-BHOPAL with Details of Specification. S.NO. ITEM QTY. UNIT RATE AMOUNT 01. FACADE OF ENTRANCE DOOR Providing & fixing in position Aluminum composite panel boxing with PVDF coating & LDPE core laminated Eurobond/ Alukbond exterior grade 4mm

More information

SEALED BID FORMAT FOR INTERIOR FURNISHING WORKS AT THE NEW PREMISES OF SBI MANIPUZHA BRANCH

SEALED BID FORMAT FOR INTERIOR FURNISHING WORKS AT THE NEW PREMISES OF SBI MANIPUZHA BRANCH SEALED BID FORMAT FOR INTERIOR FURNISHING WORKS AT THE NEW PREMISES OF SBI MANIPUZHA BRANCH Sl No Description Qty Unit Rate Amount 1 SINGLE WINDOW SYSTEM: 8 Rmt Providing and fixing of Single window system

More information

words 1 SINGLE WINDOW SYSTEM: 12 Rmt

words 1 SINGLE WINDOW SYSTEM: 12 Rmt INDICATIVE SCHEDULE FOR INTERIOR FURNISHING (REOVATION) WORK AT PATHANAPURAM BRANCH (FOR INFORMATION ONLY - NOT TO BE FILLED UP) S.No Description Qty Unit Rate Rate in words 1 SINGLE WINDOW SYSTEM: 12

More information

ENARC CONSULTANTS. M. G. ROAD, THRISSUR - 1 Ph. : &

ENARC CONSULTANTS. M. G. ROAD, THRISSUR - 1 Ph. : & ENARC CONSULTANTS M. G. ROAD, THRISSUR - 1 Ph. : 2441901 & 2441905 SCHEDULE FOR INTERIOR FURNISHING WORK FOR RASMECC BRANCH (FIRST FLOOR) SBI, CONSTRUCTION OF BUILDING AT THRISSUR - 1 Fully Glazed Partitions

More information

ANNEXTURE-B COMMERCIAL BID FURNITURE WORK BOQ FOR BANK OF BARODA REGIONAL OFFICE AT PANJIM, GOA

ANNEXTURE-B COMMERCIAL BID FURNITURE WORK BOQ FOR BANK OF BARODA REGIONAL OFFICE AT PANJIM, GOA ANNEXTURE-B COMMERCIAL BID FURNITURE WORK BOQ FOR BANK OF BARODA REGIONAL OFFICE AT PANJIM, GOA A FURNITURE WORK.- Note: All Furniture work should be in IS 303 MARINE GRADE plywood of specified brands.,

More information

1 Providing & fixing in position Aluminium composite panel. Sqft

1 Providing & fixing in position Aluminium composite panel. Sqft BANK OF INDIA, ZONAL OFFICE, AGRA DETAILED SPECIFICATIONS AND BILL OF QUANTITIES FOR THE FURNISHING WORK OF BO: KARIMGANJ BRANCH S.NO. DESCRIPTION OF ITEMS UNIT QUANTITY RATE IN RS AMOUNT IN RS 1 Providing

More information

Sealed bid format for interior furnishing of Thaikkattukara Branch (New Premises) as per uniform layout DESCRIPTION OF WORK Qty Unit Rate Amount

Sealed bid format for interior furnishing of Thaikkattukara Branch (New Premises) as per uniform layout DESCRIPTION OF WORK Qty Unit Rate Amount Sl.No 1 Sealed bid format for interior furnishing of Thaikkattukara Branch (New Premises) as per uniform layout DESCRIPTION OF WORK Qty Unit Rate Amount Providig and fixing of single window system without

More information

12 Sq m. 4 Full Height Partly Solid & Partly Glazed Partition: 22 Sq M

12 Sq m. 4 Full Height Partly Solid & Partly Glazed Partition: 22 Sq M SEALED BID FORMAT FOR FURNISHING WORKS FOR RASMEC, NEDUMANAGD AT 4TH FLOOR OF KSHB, SANTHINAGAR, THIRUVANANTHAPURAM S.No Description Qty Unit Rate Amount 1 Flooring : Providing and fixing 60x60 cm vitrified

More information

COST ESTIMATE - FURNITURE & CIVIL WORK, BANK OF INDIA PASTHAL BRANCH, BOISAR NO DESCRPITION QTY. UNIT RATE AMOUNT

COST ESTIMATE - FURNITURE & CIVIL WORK, BANK OF INDIA PASTHAL BRANCH, BOISAR NO DESCRPITION QTY. UNIT RATE AMOUNT COST ESTIMATE - FURNITURE & CIVIL WORK, BANK OF INDIA PASTHAL BRANCH, BOISAR NO DESCRPITION QTY. UNIT RATE AMOUNT Civil work 1 Pantry Platform 2 deep (granite basic rate Rs150) 6.00 R.FT. - P/F 2 deep

More information

SCHEDULED OF QUANTITIES

SCHEDULED OF QUANTITIES SCHEDULED OF QUANTITIES PROPOSED INTERIOR WORKS AT SBI ( AS PER NEW STANDARD AND COLOR CODE SCHEME ) 1 WOODEN PARTITION:- a Full Height Partition Wooden partition with internal frame work of pine wood

More information

SCHEDULE OF QUANTITIES FOR THE BANK INTERIOR FURNISHING WORKS FOR STATE BANK OF INDIA, ACCOUNT TRACKING CENTRE AT KOTI.

SCHEDULE OF QUANTITIES FOR THE BANK INTERIOR FURNISHING WORKS FOR STATE BANK OF INDIA, ACCOUNT TRACKING CENTRE AT KOTI. S.NO DESCRIPTION OF ITEM QTY UNIT RATE AMOUNT 1 DISMANTLING WORKS Dismantling & removing of existing wall panelling, tables, vinyl flooring, partitions and false celing with frame work. The rate shall

More information

ONLINE SEALED BID FORMAT FOR INTERIOR WORKS AT COCHIN UNIVERSITY CAMPUS BRANCH AS PER UNIFORM LAYOUT

ONLINE SEALED BID FORMAT FOR INTERIOR WORKS AT COCHIN UNIVERSITY CAMPUS BRANCH AS PER UNIFORM LAYOUT Sl.No 1 ONLINE SEALED BID FORMAT FOR INTERIOR WORKS AT COCHIN UNIVERSITY CAMPUS BRANCH AS PER UNIFORM LAYOUT DESCRIPTION OF WORK Qty Unit Rate Amount Providig and fixing of single window system without

More information

Our Ref: SRO/BM/C Date:

Our Ref: SRO/BM/C Date: Our Ref: SRO/BM/C Date: 03.04.2009 Subject: 1.Extension of existing partition and providing false ceiling in HSROL Sect. 2. Providing Partition and false ceiling in Sample Cell. To: Dear Sir(s), Quotation(s)

More information

Rates in Fig. Qty Unit

Rates in Fig. Qty Unit PART A: FURNITURE WORK - 1 Façade on Front Side [ Entrance ] : 160.00 sft Providing & fixing in position aluminium composite panel boxing with PVDF coating & LDPE core laminated Eurobond / Altobond / Alukbond

More information

System 3000 specifications

System 3000 specifications System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be

More information

PROPOSED INTERIORS FOR STATE BANK OF INDIA, R A C P C, SITUATED AT KUKUTPALLY, HYDERABAD. DETAILED SPECIFICATIONS AND BILL OF QUANTITIES.

PROPOSED INTERIORS FOR STATE BANK OF INDIA, R A C P C, SITUATED AT KUKUTPALLY, HYDERABAD. DETAILED SPECIFICATIONS AND BILL OF QUANTITIES. S.No. I. INTERIOR WORKS: 1.0 FIXED FURNITURE: PROPOSED INTERIORS FOR STATE BANK OF INDIA, R A C P C, SITUATED AT KUKUTPALLY, HYDERABAD. DETAILED SPECIFICATIONS AND BILL OF QUANTITIES. Item. / Particulars.

More information

CORRIGENDUM TO TENDER

CORRIGENDUM TO TENDER CORRIGENDUM TO TENDER No 1186 On behalf of our client The PUNJAB & SIND BANK we had invited sealed tenders for Interior civil furnishing work in 2 nd & 3 rd floor of H.O building at Rajendra place New

More information

PONDICHERRY UNIVERSITY ENGINEERING WING SCHEDULE OF WORK

PONDICHERRY UNIVERSITY ENGINEERING WING SCHEDULE OF WORK PONDICHERRY UNIVERSITY ENGINEERING WING SCHEDULE OF WORK Name of work: Annual Maintenance and Special repairs of Hostels, Thiruvalluvar Stadium, Vice-Chancellor s Official Residence, Department of Physical

More information

SLIDING DOOR SYSTEM_ S42 PRODUCT LIST. System description Accessories

SLIDING DOOR SYSTEM_ S42 PRODUCT LIST. System description Accessories SLIDING DOOR SYSTEM_ S42 PRODUCT LIST System description Accessories 1 SLIDING DOOR SYSTEM_ S42 1.0_ System description_ page 03 2.0_ Profiles_ page 04 3.0_ System description S1600 fixed panels_ page

More information

Devlila Apts., Shop No. 8, Fatema Nagar, Pune Tel.: Fax:

Devlila Apts., Shop No. 8, Fatema Nagar, Pune Tel.: Fax: Devlila Apts., Shop No. 8, Fatema Nagar, Pune 411013 Tel.: +91-20-56613638 Fax: +91-20-26812777 E- mail: sales@hanfas.com www.hanfas.com Product Catalogue Sliding Door Fittings Bottom Roller & Guide PVC

More information

NATIONAL LAW UNIVERSITY DELHI SECTOR-14, DWARKA NEW DELHI

NATIONAL LAW UNIVERSITY DELHI SECTOR-14, DWARKA NEW DELHI NATIONAL LAW UNIVERSITY DELHI SECTOR-14, DWARKA NEW DELHI-110078 SHORT TENDER NOTICE FOR SUPPLY AND INSTALLATION OF MODULAR FURNITURE 1. Date of Invitation of quotations : 05 th October, 2018 2. Last date

More information

: 2 : Page 2 of 10 Cond 3

: 2 : Page 2 of 10 Cond 3 ANNEXURE - B. 1 DETAILED SPECIFICATION AND BILL OF QUANTITIES FOR INTERIOR DECORATION AND FURNISHING WORKS OF BANK OF INDIA BRANCH PREMISES AT NAYARAMBALAM Sl.No. Description of item Quantity Unit Rate

More information

UNITED INDIA INSURANCE CO. LTD

UNITED INDIA INSURANCE CO. LTD UNITED INDIA INSURANCE CO. LTD MADURAI REGIONAL OFFICE TENDER FOR PROPOSED OFFICE INTERIOR WORKS FOR DIVISIONAL OFFICE - 3 AT TRICHY, UNITED INDIA INSURANCE COMPANY LTD. PART - B - Price Bid CONSULTANTS

More information

SLIDING DOOR SYSTEM_ S34 PRODUCT LIST. System description Accessories

SLIDING DOOR SYSTEM_ S34 PRODUCT LIST. System description Accessories SLIDING DOOR SYSTEM_ S34 PRODUCT LIST System description Accessories SLIDING DOOR SYSTEM_ S34 1.0_ System description_ page 03 2.0_ Profiles_ page 04 3.0_ Profile finishes_ page 08 4.0_ Panels_ page 09

More information

CSI Section DMI Light Gage Structural Steel Framing Systems. Blocking Fire Rated Pre-cut (Proprietary) Furring Wall Preservative Treated

CSI Section DMI Light Gage Structural Steel Framing Systems. Blocking Fire Rated Pre-cut (Proprietary) Furring Wall Preservative Treated DMI Database CCF5IF9HGLPD-QB (4,88) $14,775.00 CSI Section 05400 DMI Light Gage Structural Steel Framing Systems Angle Framing Bridging Channel Flat Strapping Furring Clip Angle Soffit/Fascia/Deck Framing

More information

Organisational Kitchen Fittings Kitchen Cabinet Accessories

Organisational Kitchen Fittings Kitchen Cabinet Accessories Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic

More information

PART B: FINANCIAL BID

PART B: FINANCIAL BID Relationship beyond Banking TENDER DOCUMENT FOR INTERIOR FURNISHING (excluding ELECTRICAL & DATA CABELING WORK) WORKS IN BANK OF INDIA BRANCH AT KHARKHODA BANK OF INDIA, ZONAL OFFICE, S.C.O. NO. 76-82,

More information

SCI-FAB Product Specifications. Casework Section 1. Part 1 General

SCI-FAB Product Specifications. Casework Section 1. Part 1 General SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.

More information

Factory Assistance: Phone: Fax: Page 1

Factory Assistance: Phone: Fax: Page 1 CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)

More information

ITEMS DIMENTION (mm)(lxwxh)material POLISH/QUALITY QUANTITY AREA (SQ.M) SPECIFICATIONS

ITEMS DIMENTION (mm)(lxwxh)material POLISH/QUALITY QUANTITY AREA (SQ.M) SPECIFICATIONS 1 2 4 5 6 7 8 ITEMS DIMENTION (mm)(lxwxh)material POLISH/QUALITY QUANTITY AREA (SQ.M) SPECIFICATIONS 1.01 RECEPTION LOUNGE Reception table (double level) 4350x1200x1060 Veneer finish Melamine 1 NA Customized

More information

Versatrac R-System Stock Extrusions, Clips and Accessories

Versatrac R-System Stock Extrusions, Clips and Accessories Versatrac R-System Extrusions are available in 300 series (for 3 3/4" walls) and 400 series (for 4 7/8" walls). Standard finishes are Satin Metallic Bronze, Satin Black, Satin White Baked Enamel, and Clear

More information

CHENNAI. TENDER FOR PROPOSED OFFICE INTERIOR AND ELECTRICAL WORKS RELATED TO SHIFTING OF MYLAPORE BRANCH UNITED INDIA INSURANCE.

CHENNAI. TENDER FOR PROPOSED OFFICE INTERIOR AND ELECTRICAL WORKS RELATED TO SHIFTING OF MYLAPORE BRANCH UNITED INDIA INSURANCE. CHENNAI. TENDER FOR PROPOSED OFFICE INTERIOR AND ELECTRICAL WORKS RELATED TO SHIFTING OF MYLAPORE BRANCH UNITED INDIA INSURANCE CHENNAI. PART B Price bid CONSULTANTS : FOARCONS Forum Architectural Consultants

More information

SECTION 12345.1 - MODULAR STEEL LABORATORY CASEWORK 1 PART 1 PRODUCTS 1.01 MANUFACTURER A. Casework and equipment manufacturer: ALIR Systems, Inc., 245 Harrison St, Jamestown, New York, 14701. 1.02 CASEWORK

More information

Moveable Workstations. Enterprise KEWAUNEE. encouraging new discovery...worldwide

Moveable Workstations. Enterprise KEWAUNEE. encouraging new discovery...worldwide Enterprise Moveable Workstations KEWAUNEE encouraging new discovery...worldwide Movable Workstations Self-supporting workstations Single and double sided Adjustable height worksurfaces Integrated shelving

More information

CABINETRY Assembly Instructions

CABINETRY  Assembly Instructions www.hdicabinetry.com Assembly Instructions TABLE OF CONTENTS Category Page(s) Section 1: Framed Series Base Cabinet Instructions Wall Cabinet Instructions Easy Reach Cabinet Instructions 1.01-1.04 1.05-1.06

More information

MINIMALIST DOOR FRAMES

MINIMALIST DOOR FRAMES MINIMALIST DOOR FRAMES MINIMALIST DOOR FRAMES TIMELESSLY TRIMLESS. ENGINEERED PRODUCT SYSTEMS / DOOR FRAMES Fry Reglet's unique family of trimless door frame enhances modern design with all the functionality

More information

Interior Equipment/Shop Fittings

Interior Equipment/Shop Fittings Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories

More information

SCHEDULE FOR INTERIOR FURNISHING WORK FOR SBI, HEAD OFFICE - TRIVANDRUM- 7 th

SCHEDULE FOR INTERIOR FURNISHING WORK FOR SBI, HEAD OFFICE - TRIVANDRUM- 7 th . Qty. Description 1 Fully Glazed Partitions 26.00 Slim line partition of approved make :- supply and installation of full height straight glass partition 12mm thick toughened glass and proprietary electroplated

More information

MINIMALIST DOOR FRAMES

MINIMALIST DOOR FRAMES MINIMALIST DOOR FRAMES MINIMALIST DOOR FRAMES TIMELESSLY TRIMLESS. ENGINEERED PRODUCT SYSTEMS / DOOR FRAMES Fry Reglet's unique family of trimless door frame enhances modern design with all the functionality

More information

Alexandra Secondary College Refurbishment Project No: 1507 SECTION MANUFACTURED CASEWORK - SHOP BUILT 12300/1

Alexandra Secondary College Refurbishment Project No: 1507 SECTION MANUFACTURED CASEWORK - SHOP BUILT 12300/1 SECTION 12300 MANUFACTURED CASEWORK - SHOP BUILT 12300/1 PART I GENERAL 101 Scope The work of this Section covers the supply and installation of manufactured casework items. It includes but is not limited

More information

Accessories and workbenches

Accessories and workbenches Workbenches To complete the Elabo furnishing systems, we also provide workbenches and organisable steel plate base cabinets. Steel cabinets, shelves and shelf trolleys are available for storage of materials

More information

School of Community Science and Technology Indian Institute of Engineering Science and Technology, Shibpur Howrah

School of Community Science and Technology Indian Institute of Engineering Science and Technology, Shibpur Howrah Indian Institute of Engineering Science and Technology, Shibpur Howrah-711 103 Project Code: DRC/GRSE-OTH/SOCSAT/SKM/002/14-15 Notice Inviting Quotations Sealed quotations are invited for the supply of

More information

Contents. E-Line Series (Wood Casework) K-Line Series (Wood Casework) D-Line Series (Wood Casework)

Contents. E-Line Series (Wood Casework) K-Line Series (Wood Casework) D-Line Series (Wood Casework) WOOD CABINET LINES Contents E-Line Series (Wood Casework)... 2-3 K-Line Series (Wood Casework)... 4-5 D-Line Series (Wood Casework)... 6-7 L-Line Series (Wood Casework)... 8-9 M-Line Series (MDF Casework)...

More information

DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION METAL LOCKERS

DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION METAL LOCKERS PART 0 A/E INSTRUCTIONS 0.01 GENERAL DESIGN REQUIREMENTS A. Architect shall coordinate with the DPS Project Manager the type, layout and size of lockers required on the project. B. Varsity athletic Lockers

More information

Installation Manual for Metal Emperor Lockers

Installation Manual for Metal Emperor Lockers P a g e 1 Table of Contents Page General Notes and Tools Required 2-3 Assemble Shelves with Coat Hooks/Coat Rods 4 Fastening Chart 5 Knock Down Locker Assembly (Banks of Three) 6-12 Appendix A: Dress End

More information

14000 I/O Series Flush Glaze. Fabrication and Installation Instructions

14000 I/O Series Flush Glaze. Fabrication and Installation Instructions 14000 I/O Series Flush Glaze Fabrication and Installation Instructions Last saved on 12/18/2009 Table of Contents GENERAL CONSTRUCTION NOTES...3 EXTRUDED ALUMINUM PARTS...4 ACCESSORIES...5 OVERVIEW...6

More information

Versatrac R-System Stock Extrusions, Clips and Accessories

Versatrac R-System Stock Extrusions, Clips and Accessories Versatrac R-System Extrusions are available in 300 series (for 3 3/4" walls) and 400 series (for 4 7/8" walls). Standard finishes are Satin Metallic Bronze, Satin Black, Satin White Baked Enamel, and Clear

More information

Executive furniture. Moka

Executive furniture. Moka Executive furniture Moka Features Authentic executive furniture with a clean design! Moka combines conviviality and tradition with its curved lines and melamine panel legs. Functional items with various

More information

DIVISION 12 - FURNISHINGS. Section General Discussion. Introduction

DIVISION 12 - FURNISHINGS. Section General Discussion. Introduction Section 12000 - General Discussion This General Discussion Section contains material which is important to the successful fabrication and/or installation of furnishings and equipment in construction projects.

More information

Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.

Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty. Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic

More information

LIST OF APPROVED AND NOMINATED MANUFACTURERS / SUPPLIERS OF MATERIALS BANK OF INDIA, AMROHA, UTTAR PRADESH BRANCH INTERIOR FURNISHING ITEMS

LIST OF APPROVED AND NOMINATED MANUFACTURERS / SUPPLIERS OF MATERIALS BANK OF INDIA, AMROHA, UTTAR PRADESH BRANCH INTERIOR FURNISHING ITEMS LIST OF APPROVED AND NOMINATED MANUFACTURERS / SUPPLIERS OF MATERIALS BANK OF INDIA, AMROHA, UTTAR PRADESH BRANCH INTERIOR FURNISHING ITEMS Sl.No. MATERIALS APPROVED BRANDS 1. False Ceiling,Grid False

More information

Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .

Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie  . Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for

More information

OXYGEN INSTALLATION. Revision date

OXYGEN INSTALLATION. Revision date 12345 1 Hardware List 12345 Flat head wood screw #9 x 7/8 long with #2 Phillips drive, silver Used to attach surfaces and end panels Hex set screw ½-13 x 2 long with 1/4 hex drive, black Used on Legs Hex

More information

Cablelink Plus Flush Technical

Cablelink Plus Flush Technical Cablelink Plus Flush Technical 107 technical hotline +44 (0)1268 563720 screeded floor systems is designed to provide power and data distribution highways in screeded floors. The robust system offers a

More information

MINIMALIST DOOR FRAMES PRODUCT BROCHURE ARCHITECTURAL METALS

MINIMALIST DOOR FRAMES PRODUCT BROCHURE ARCHITECTURAL METALS MINIMALIST DOOR FRAMES ARCHITECTURAL METALS PRODUCT BROCHURE MINIMALIST DOOR MINIMALIST DOOR FRAME TIMELESSLY TRIMLESS. Fry Reglet's unique, trimless door frame enhances modern design with all the functionality

More information

Frameless Inline Door With Return QCI5263

Frameless Inline Door With Return QCI5263 INSTALLATION INSTRUCTIONS Frameless Inline Door With Return QCI5263 WALL MOUNT HINGES FRAMELESS DOOR / PANEL / RETURN PANEL QCI5263 REV. 0 Page 1 Certified 06/17/2016 Parts List with wall mount hinges

More information

FRAMELESS DOOR / PANEL WITH WALL MOUNT HINGES QCI5274

FRAMELESS DOOR / PANEL WITH WALL MOUNT HINGES QCI5274 FRAMELESS DOOR / PANEL WITH WALL MOUNT HINGES QCI5274 QCI0274 QCI5274 REV. Rev. 1 0 Page Page 1 1 Date Certified: Certified 06/16/2016 10/01/10 Parts List with wall mount hinges ITEM NO. Part # DESCRIPTION

More information

ACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES WIRE MESH PARTITION FOLDING GATE

ACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES WIRE MESH PARTITION FOLDING GATE acorn WIRE ACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES 10 22 13 WIRE MESH PARTITION 10 22 16 FOLDING GATE GUIDE Page 4 / 5 No. 130A All wire type for normal industrial use. 7, 8, 9, 10 and

More information

Executive Cherry (7130) Finish. Sunset Cherry (7131) Finish. Brown Cherry (7132) Finish

Executive Cherry (7130) Finish. Sunset Cherry (7131) Finish. Brown Cherry (7132) Finish V E N E E R C O L L E C T I O N Executive Cherry (7130) Finish Sunset Cherry (7131) Finish Brown Cherry (7132) Finish VENEER COLLECTION 7130/7131/7132 2 Executive Cherry Finish Transitional design - An

More information

STRAIGHT SLIDING PACER AND FLEXIROL DOOR SYSTEMS

STRAIGHT SLIDING PACER AND FLEXIROL DOOR SYSTEMS PACER AND FLEXIROL STRAIGT SLIDING DOOR SYSTEMS The main advantage of using a straight sliding system is that it saves room space, as the door does not require a swing or stacking space to open. Using

More information

1. Show the following information with additional information necessary to indicate shop compliance with the requirements of this section.

1. Show the following information with additional information necessary to indicate shop compliance with the requirements of this section. SECTION 12360 LIBRARY SHELVING PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 06100 - Carpentry. 2. 09200 - Metal Studs, Lath, Suspension Ceiling, Plaster and Stucco. 3. 09660 - Resilient Tile Flooring.

More information

NARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE. Installation Instructions

NARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE. Installation Instructions NARROW, MEDIUM AND WIDE STILE, THERMASTILE AND DURASTILE Installation Instructions PART Y015 JUNE 2016 Table of Contents Section 1. GENERAL NOTES AND GUIDELINES... 2. DOOR HARDWARE A. Locks B. Push/Pulls

More information

FIXED PANEL SLIDER QCI5241

FIXED PANEL SLIDER QCI5241 INSTALLATION INSTRUCTIONS FIXED PANEL SLIDER QCI5241 FRAMELESS PANEL / DOOR / PANEL FRAMELESS DOOR / PANEL QCI5241 REV. 0 Page 1 Certified 06/16/2016 Parts List *Quantities may vary QCI5241 REV. 0 Page

More information

Allora ALCOVE ENCLOSURE INSTALLATION BEFORE INSTALLATION CHECK THAT YOUR ALLORA SHOWER ENCLOSURE SYSTEM IS UNDAMAGED

Allora ALCOVE ENCLOSURE INSTALLATION BEFORE INSTALLATION CHECK THAT YOUR ALLORA SHOWER ENCLOSURE SYSTEM IS UNDAMAGED Allora ALCOVE ENCLOSURE INSTALLATION BEFORE INSTALLATION CHECK THAT YOUR ALLORA SHOWER ENCLOSURE SYSTEM IS UNDAMAGED ALCOVE SHOWER Your shower can be installed to open Left hand or Right hand by rotating

More information

Gardman Lean-to Greenhouse Assembly Instructions

Gardman Lean-to Greenhouse Assembly Instructions Page 1 Gardman Lean-to Greenhouse Assembly Instructions Our Help Line provides support and advice to customers of Summer Garden Buildings after ordering. For advice before you buy you can phone us free

More information

Disassembly Instructions for Recycling June 10, 2010

Disassembly Instructions for Recycling June 10, 2010 Disassembly Instructions for Recycling June 10, 2010 These instructions apply to all workstation and wall products. Disassembly Once workstations or walls are dismantled as described under Disassembly

More information

Linear Hook- on Worksurfaces

Linear Hook- on Worksurfaces Linear Hook- on Worksurfaces Linear Hook-On Worksurfaces come in three depths and seven lengths. Different worksurfaces have different reqirements for installation that are outlined below. 27 inch deep

More information

1/4 FRAMELESS DOOR WITH INLINE PANEL 1413A-1713A-1813A

1/4 FRAMELESS DOOR WITH INLINE PANEL 1413A-1713A-1813A 1/4 FRAMELESS DOOR WITH INLINE PANEL 1413A-1713A-1813A F AB GLASS AND MIRROR www.fabglassandmirror.com Call: +1 888-474-2221 Fax: (614)-334-4919 Office Timing: 8:30-18:00 EST info@fabglassandmirror.com

More information

Closet System Installation Manual

Closet System Installation Manual Closet System Manual Thank you For choosing our Custom Closet Collection to fit all your needs Closets come fully assembled to make your project an enjoyable and satisfying experience. With quality Custom

More information

Technical Product Description

Technical Product Description Worktops 5. Thickness material structure Front edge Bottom face coating 40 mm, 50 mm Laminate according to standard: EN 438 Wood pore or relief, matt or gloss 2 x Radius 3 mm, 6 mm or 8 mm depending on

More information

19-in. Mini-Rack Cabinet, Type 1

19-in. Mini-Rack Cabinet, Type 1 Spec-00466 19-in. DP FX (763) Mini-Rack 422-2588 422-2661 Cabinet, Components and Accessories Free-Stand Networking Cabinets 19-in. Mini-Rack Cabinet, Type 1 Industry Standards NEMA Type 1 EIA 310-D /

More information

SECTION BATHROOM ACCESSORIES

SECTION BATHROOM ACCESSORIES SECTION 10-20-00 BATHROOM ACCESSORIES PART 1 GENERAL 1.01 SCOPE OF WORK A. Include all supplied materials, to complete the work of the above referenced section. 1. SCS to supply bathroom accessories, Finish

More information

IMPORTANT INSTALLATION GUIDE VALENCIA ANGLE CORNER SHOWER READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION

IMPORTANT INSTALLATION GUIDE VALENCIA ANGLE CORNER SHOWER READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION INSTALLATION GUIDE VALENCIA ANGLE CORNER SHOWER SEALANT REQUIRED TO COMPLETE THIS INSTALLATION: (Supplied) Sika Sikasil NG (Arctic White) To seal the WHITE shower door and returns to the shower tray. Usage:

More information

Installation Instructions

Installation Instructions by Plato Woodwork Installation Instructions Plato Woodwork, Inc. 200 Third Street SW P.O. Box 98 Plato, MN 55370 www.platowoodwork.com 800.328.5924 SECTION GUIDE GETTING STARTED PAGE # Installation Methods...

More information

Opus Cabinets with "H Storage Unit, continued

Opus Cabinets with H Storage Unit, continued 66 Health Volume 2 Casegoods Specification Guide Fascia is used to extend cabinets to the ceiling Fascia can only be used on 84"H cabinets Fascia accommodates ceiling heights of 7'6" 9'6" in 1 16" increments

More information

Family and Consumer Sciences

Family and Consumer Sciences Family and Consumer Sciences Furnishings for: Family & Consumer Science Science Art Music Sheldon represents the ultimate in flexibility, durability, and the maximum useful product life. Sheldon cabinet

More information

English Cherry Finish

English Cherry Finish K E S W I C K V E N E E R C O L L E C T I O N 7990 English Cherry Finish K E S W I C K 7990 / VENEER 2 Traditional Styling - Decorative wood accent mouldings, recessed modesty panels, and decorative, plated

More information

05/11. CI/SfB (22) fire & sound. tenon. A cost effective performer.

05/11. CI/SfB (22) fire & sound. tenon. A cost effective performer. CI/SfB 05/11 (22) fire & sound tenon A cost effective performer fire & sound tenon fire & sound at a glance BOARD ROOMS EXECUTIVE OFFICE SUITES CONFERENCE SUITES GENERAL OFFICE CLEAN ROOMS LIGHT INDUSTRIAL

More information

INFUSIONS and METALWORKS Wings Accent and Acoustical Clouds

INFUSIONS and METALWORKS Wings Accent and Acoustical Clouds INFUSIONS and METALWORKS Wings Accent and Acoustical Clouds Assembly and Installation Instructions 1. GENERAL 1.1 Product Description Wings is a decorative ceiling element consisting of a 10 foot long

More information

Display/Accessory Furniture

Display/Accessory Furniture 1 Multimedia Display End-of-Range, 60-013-S00 End-of-range displayer has five 59 1 /2" 19 3 /8" 16" 163 Sloped Shelving Book Displayer sloping shelf spaces for displaying books spine out at an angle for

More information

AMPCO PRODUCTS, INC. TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS

AMPCO PRODUCTS, INC. TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS A. Drawings and General Provisions of Contract, including General and Supplementary Conditions and

More information

Technical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard

Technical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard Technical product descriptions WORKTOPS I STANDARD 1. 38 mm 2. Chipboard 3. Surface material Laminate (CPL, HPL) 4. Laminate thickness 0,6-0,8 mm 5. Surface structure Wood pore or relief, matt, gloss 6.

More information

Before Assembling the Storage Wall

Before Assembling the Storage Wall Chapter 1 Assembling the Lista Storage Wall Lista provides two types of standard Storage Walls: B251 and B255. The design, construction, assembly, and quality are identical for both types, however, B251

More information

Standard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories

Standard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories Spec-00466 F763.422.2661 763.422.2588 Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories 19-in. Mini-Rack

More information

Music Area Casework General 1.01 Summary Related Sections Definitions Qualifications and Quality Assurance

Music Area Casework General 1.01 Summary Related Sections Definitions Qualifications and Quality Assurance 1.00 General 1.01 Summary Music Area Casework A. This section includes the following Scope of Work as referred to in the plans: 1. Thermally Fused Laminate manufactured casework, for use in music areas,

More information

Greenhouse Assembly Instructions

Greenhouse Assembly Instructions Greenhouse Assembly Instructions Our Help Line provides support and advice to customers of Summer Garden Buildings after ordering. For advice before you buy you can phone us free 7 days a week on 0800

More information

LABORATORY SPECIFICATION SHEET

LABORATORY SPECIFICATION SHEET ELECTRIC HEIGHT ADJUSTABLE LAB WORKSTATION LPC3060-FH30K-WP023060LN LPC3060-FI30K-WP023060LN LPC3072-FH30K-WP023072LN LPC3072-FI30K-WP023072LN LPC3060-FH30K-WP023060ES LPC3060-FI30K-WP023060ES LPC3072-FH30K-WP023072ES

More information

MINISTRY OF HEALTH & FAMILY WELFARE, GOVERNMENT OF INDIA. Tender For

MINISTRY OF HEALTH & FAMILY WELFARE, GOVERNMENT OF INDIA. Tender For MINISTRY OF HEALTH & FAMILY WELFARE, GOVERNMENT OF INDIA (Department of AYUSH) Tender For Supply, installation, testing & commissioning of Modular type office Furniture works including other associated

More information

BCI General Specifications Design: BCI Opal Shelving System

BCI General Specifications Design: BCI Opal Shelving System BCI General Specifications Design: BCI Opal Shelving System SH3.0 General Product Design and Construction SH3.0.1 The shelving system is constructed with vertical frames connected by horizontal and diagonal

More information

MANUAL INSTALLATION. Linear Bar Grille - Heavy Duty LBPH/LBMH. v000 Issue Date: 09/17/ Price Industries Limited. All rights reserved.

MANUAL INSTALLATION. Linear Bar Grille - Heavy Duty LBPH/LBMH. v000 Issue Date: 09/17/ Price Industries Limited. All rights reserved. MANUAL INSTALLATION Linear Bar Grille - Heavy Duty LBPH/LBMH v000 Issue Date: 09/17/18 2018 Price Industries Limited. All rights reserved. TABLE OF CONTENTS Product Overview Overview...1 Before You Start...2

More information

Wilsonstak. library bookstacks general specifications. Wilsonstak

Wilsonstak. library bookstacks general specifications. Wilsonstak Wilsonstak library bookstacks general specifications Wilsonstak Scope This specification covers delivery and installation of Steel Bookstack Shelving of the bracket type only. Unit heights, depths and

More information

Frameless Inline Door QCI5254

Frameless Inline Door QCI5254 INSTALLATION INSTRUCTIONS Frameless Inline Door QCI5254 FRAMELESS DOOR / PANEL QCI5254 REV. 0 Page 1 Cer fied 06/16/2016 Parts List with wall mount hinges *Quanes may vary QCI5254 REV. 0 Page 2 Cer fied

More information

Nanton Grain Mill Assembly

Nanton Grain Mill Assembly ( 1 ) Nanton Grain Mill Assembly Locate package for assembling storage building. These are cut from 1/8 masonite. Inspect and lightly sand edges where it will be bonded. Use white glue or CA glue to bond.

More information