National Certificate in Drilling - Hydrocarbon (Derrickman) (Level 3) with strands in Off Shore Drilling, and On Shore Drilling Level 3

Transcription

1 NZQF NQ Ref 1336 Version 2 Page 1 of 6 National Certificate in Drilling - Hydrocarbon (Derrickman) (Level 3) with strands in Off Shore Drilling, and On Shore Drilling Level 3 Credits This qualification has been reviewed. The last date to meet the requirements is 31 December Transition Arrangements This qualification and the National Certificate in Drilling - Non-hydrocarbon (Driller) (Level 3) with optional strands in Environmental/Geotechnical, and Water Well [Ref: 1332] have been reviewed and replaced by the New Zealand Certificate in Drilling (Level 4) [Ref: 2622]. The last date for entry into training programmes or courses leading to this qualification is 31 December The last date of assessment for the replaced qualification is 31 December People working towards the replaced qualification must complete its requirements or transfer to a programme of study or training leading to its replacement by 31 December It is anticipated that no existing candidates will be disadvantaged by these transition arrangements. However, anyone who feels that they have been disadvantaged may appeal to MITO at the address below. Appeals will be considered on a case by case basis. For detailed information see Review Summaries on the NZQA website. NZQF National Qualification Registration Information Process Version Date Last Date for Assessment Registration 1 October 2007 December 2018 Review 2 March 2015 December 2018

2 NZQF NQ Ref 1336 Version 2 Page 2 of 6 Standard Setting Body (MITO) PO Box Wellington 6143 Telephone Fax info@mito.org.nz Website

3 NZQF NQ Ref 1336 Version 2 Page 3 of 6 National Certificate in Drilling - Hydrocarbon (Derrickman) (Level 3) with strands in Off Shore Drilling, and On Shore Drilling Level 3 Credits Purpose The National Certificate in Drilling - Hydrocarbon (Derrickman) (Level 3) with strands in Off Shore Drilling, and On Shore Drilling recognises the skills of an experienced Derrickman at an oil or gas drilling operation. The holder of the qualification is able to perform tasks involving a broad range of skilled applications applied in a wide variety of contexts, which may involve application of some discretion and judgement in selecting equipment, services or contingency measures. A core component of essential skills required to work at a hydrocarbon drilling operation related to health and safety; emergency procedures; creating, maintaining and enhancing productive working relationships; operating and maintaining ancillary equipment; conducting and maintaining derrick operations; trip casing; and trip piping, is included in this qualification. A small core elective that recognises a variety of skill sets is required due to the diversity of drilling environments. The strands in Off Shore Drilling, and On Shore Drilling, provide opportunities for specialisation. The Off Shore Drilling strand recognises skills in monitoring, operating and maintaining mud pumps and equipment, and operating drilling fluids and mud pits in a hydrocarbon drilling environment. The On Shore Drilling strand recognises skills in managing subordinates and equipment, preparing and operating drilling fluid systems as a Derrickman, maintaining services and operations, and operating mud pumps and mud systems in a hydrocarbon drilling environment. There is an optional standard in this qualification, however, it is not required to achieve the qualification but may be required in some employment contexts. This qualification includes Australian competency standards that are part of the DRT03 Drilling Training Package Certificate 111 in Drilling. The New Zealand Extractive Industries Training Organisation has endorsed these standards. This qualification is part of a pathway, which begins with the National Certificate in Drilling - Hydrocarbon (Floorman) (Level 2) with strands in Off Shore Drilling, and On Shore Drilling [Ref: 1335], and continues with the National Certificate in Drilling - Hydrocarbon (Driller) (Level 4) with strands in Off Shore Drilling, and On Shore Drilling [Ref: 1337], culminating in the National Diploma in Drilling - Hydrocarbon (Rig Manager, Tool Pusher) (Level 5) with strands in Off Shore Drilling, and On Shore Drilling [Ref: 1338].

4 NZQF NQ Ref 1336 Version 2 Page 4 of 6 Special Notes Prerequisite: National Certificate in Drilling - Hydrocarbon (Floorman) (Level 2) with a strand in Off Shore Drilling, or On Shore Drilling [Ref: 1335], or demonstrate equivalent skills and knowledge. Credit Range Core Compulsory Core Elective Level 3 credits Level 4 credits Minimum totals 58 5 Off Shore Drilling Strand On Shore Drilling Strand Level 3 credits Level 4 credits 11 Minimum totals Minimum total with strand Summary of Requirements Core Compulsory standards Core Elective A minimum of 5 credits as specified One of the following strands is required Off Shore Drilling Strand On Shore Drilling Strand Award of NQF Qualifications Credit gained for a standard may be used only once to meet the requirements of this qualification. Unit standards and achievement standards that are equivalent in outcome are mutually exclusive for the purpose of award. The table of mutually exclusive standards is provided in section 7 of the New Zealand Qualifications Authority (NZQA) Rules and Procedures publications available at Reviewed standards that continue to recognise the same overall outcome are registered as new versions and retain their identification number (ID). Any version of a standard with the same Id may be used to meet qualification requirements that list the ID and/or that specify the past or current classification of the standard.

5 NZQF NQ Ref 1336 Version 2 Page 5 of 6 Detailed Requirements Core Compulsory The following standards are required Apply occupational health and safety in a hydrocarbon 3 15 drilling workplace Control emergencies and critical situations in a 4 5 hydrocarbon drilling environment Create, maintain and enhance productive working 3 6 relationships in a hydrocarbon drilling environment Operate and maintain ancillary equipment in a 3 7 hydrocarbon drilling environment Conduct and maintain derrick operations in a 3 17 hydrocarbon drilling environment Trip casing in a hydrocarbon drilling environment Trip pipe in a hydrocarbon drilling environment 3 4 Core Elective A minimum of 5 credits at Level 3 or above From anywhere on the NQF Off Shore Drilling Strand The following standards are required Monitor, operate and maintain mud pumps and equipment in a hydrocarbon drilling environment Operate drilling fluids and mud pits in a hydrocarbon drilling environment On Shore Drilling Strand The following standards are required Manage subordinates and equipment in a hydrocarbon drilling environment Prepare and operate drilling fluid systems as a derrickman in a hydrocarbon drilling environment

6 NZQF NQ Ref 1336 Version 2 Page 6 of Maintain services and operations to meet quality standards in a hydrocarbon drilling environment Operate mud pumps in a hydrocarbon drilling environment Operate mud systems in a hydrocarbon drilling environment Optional standards The following standard is optional Assist in the transfer of passengers and freight during helicopter operations in a hydrocarbon drilling environment 2 6 Certification The certificate will display the logos of NZQA and. Classification This qualification is classified according to the NQF classification system and the New Zealand Standard Classification of Education (NZSCED) system as specified below. DAS Classification NZSCED Code Description Code Description 2043 Engineering and Technology > Drilling Industry > Drilling - Hydrocarbon Engineering and Related Technologies > Process and Resources Engineering > Mining and Resources Engineering Quality Management Systems Providers and Industry Training Organisations must be accredited by a recognised Quality Assurance Body before they can register credits from assessment against standards. Accredited providers and Industry Training Organisations assessing against standards must engage with the moderation system that applies to those standards. Accreditation requirements and the moderation system are outlined in the associated Accreditation and Moderation Action Plan (AMAP) for each standard.