Call for Papers. Düsseldorf, 28 th 29 th October Pump Users. Compressor Users. International Forum International Forum 2008

Transcription

1 International Rotating Equipment Conference Düsseldorf, 28 th 29 th October 2008 Compressor Users International Forum 2008 Pump Users International Forum 2008 Call for Papers

2 International Rotating Equipment Conference Düsseldorf, 28 th 29 th October International Forums consolidated! The VDMA as promoter of the Pump Users International Form and Compressor Users International Forum and the EFRC as promoter of the EFRC Conference are pleased to organise their forums in conjunction with one another at the same location simultaneously. They compose the International Rotating Equipment Conference to be held in Düsseldorf, 28 th 29 th October The forum offers a unique opportunity to users of rotating equipment (pumps and compressors). End users, manufacturers, suppliers and scientists are enabled to meet experts out of the relevant branches at a high density for discussion or expert talk. The core of the conference is again generated by the great number of excellent lectures. A technical exhibition tops off the information offered. The International Congress Centre in Düsseldorf will be an appropriate location for this event. Offers of the Conference in all approximately 140 presentations in parallel sessions special training seminars prior to the conference to enhance the technical understanding of a specific topic on pumps or compressors (to be announced) accompanying technical exhibition approximately 1000 m 2 in size Time schedule for participants Training Seminars 27 th October 2008 Lectures 28 th 29 th October 2008 Technical Exhibition 28 th 29 th October 2008 How can you contribute to the event? If we have attracted your attention we would like you to: submit proposals for technical papers, propose themes for training sessions, confirm your interest to participate in the technical exhibition, voice your interest in participating in the forum. Interested in presenting a technical paper? Please consult the portion of the conference in which you wish to participate in order to obtain the procedure. Interested in exhibiting your product or service? Please contact Mrs. Michaela Ruhl Phone michaela.ruhl@vdma.org for detailed information. Interested in attending the conference? Please contact Mrs. Gudrun Rehberger Phone gudrun.rehberger@vdma.org for complementary information. Summary of dates: Abstracts for Technical Papers to be given latest: 10 December 2007 Organiser s receipt latest by: 15 December 2007 Notice of acceptance to authors: 20 January 2008 Elaborated Technical Papers to be sent latest: 15 April 2008 Programme brochure available 30 April 2008 Powered by

3 Pump Users International Forum 2008 About the Pump Users International Forum Based on the great tradition of eight Pump Congresses since 1973, VDMA Pumps + Systems Association will organise the next Pump Users International Forum 2008, in Düsseldorf, Germany from 28 th 29 th October During the last forum in 2004 more than 760 participants attended about 50 technical lectures, and 65 exhibitors found customers for technical discussions in a laid-back atmosphere. It is the leading pump congress of its kind in Europe. Pumps and Systems With Pumps and Systems as the leading topic, the forum will be the perfect place to: describe your solution for unresolved questions and problems related to pump applications, discuss the significance of pumps in respect to the energy consumption of pumping systems, recognise that reliability and energy/cost saving is necessarily no contradiction, present your ideas for cost savings in operating pumps and pumping systems, introduce your new developments and technical solutions, communicate with your supplier or customer in a relaxed setting. What will the Pump Users International Forum offer? The Pump Users International Forum 2008 will offer the following in form of parallel presentations: about 60 presentations in parallel sessions special training seminars prior to the conference to expand technical knowledge of specific topics on pumps or comprehensive subjects, e. g. EC-Directives (to be announced) an accompanying technical exhibition Are you interested in presenting a technical paper? If you would like to submit a proposal for a technical paper please return the enclosed reply form by no later than 10 December, The appointed programme committee will decide on its acceptance. The complete text of the accepted technical papers must be submitted by 15 April Upon being accepted by the organisers, the abstracts will be available at the website: Your paper should be easily classified and allocated to one of the categories listed for technical papers or training sessions (see below). Suggestions for other subjects are welcome. All abstracts and technical papers are to be submitted in English, the official language of the forum (presentation and discussion) accompanied by simultaneous interpretation into German in one out of three parallel sessions. All lectures are scheduled to be 30 minutes in length (20 minutes for presentation, 10 minutes for discussion). Proposed technical papers which have been published or presented elsewhere prior to the end of the forum will not be accepted. In the event of subsequent publication a reference to the forum is to be made. Conference registration is free of charge for the presenter of a lecture which has been accepted for presentation. Technical papers welcome according to the following subjects: We graciously request your paper on rotodynamic pumps, positive displacement pumps, progressive cavity pumps, screw pumps, diaphragm pumps or other pump types according to the following subjects: oil and gas production (e. g. off-shore) refinery applications chemical and process industry pharmaceutical application agrifood application water supply water treatment wastewater applications cleaning application; building reconstruction heating, cooling and other building applications exceptional pump liquids power generation applications in the field of alternative energy contribution to the energy savings: e. g. efficiency; materials or manufacturing effects energy efficient drives & controls opportunities using modern drive and control technology; field bus; early failure detection; RFID or highly sophisticated motor technology significance of a system approach and the potentials by product improvement manufacturer/customer relation contracting; service and maintenance; system analysis; assessment improvement on basics (impeller design; cavitations); opportunities of CFD technology; new cognitions on hydraulics, coating or surface treatment Papers composed jointly by manufacturers and customers are preferred. Please send your abstracts to: VDMA Pumps + Systems Association Friedrich Klütsch Phone Fax friedrich.kluetsch@vdma.org

4 Compressor Users International Forum 2008 About the Compressor Users International Forum For the second time the VDMA Compressors, Compressed Air and Vacuum Technology Association will organise the Compressor Users International Forum 2008 from 28 th 29 th October 2008 in Düsseldorf, Germany. This Forum will offer an extraordinary opportunity for compressor users, manufacturers and researchers or scientists to exchange their experiences, news and innovations about compressors and compressed air and gas systems as well as their application. The Compressor Users International Forum 2008 will be focused on Process Gas Compressors (rotary machines) and compressed air compressors as well as compressed air technology. Compressors and Systems With Compressors and Systems as the leading topic, the forum will be the perfect place to: describe your solution for unresolved questions and problems related to compressor applications, discuss the significance of compressors in respect to the energy consumption of compressors/compressed air systems, recognise that reliability and energy/cost saving is necessarily no contradiction, present your ideas for cost savings in operating compressors and compressor/ compressed air systems, introduce your new developments and technical solutions, communicate with your supplier or customer in a relaxed setting. What will the Compressor Users International Forum offer? The Compressor Users International Forum 2008 will offer the following in form of parallel presentations: about 40 presentations in parallel sessions special training seminars prior to the conference to expand technical knowledge of special topics on compressors/compressed air technology or comprehensive subjects, e. g. EC-Directives (to be announced) an accompanying technical exhibition Are you interested in presenting a technical paper? If you would like to submit a proposal for a technical paper please return the enclosed reply form by no later than 10 December, The appointed programme committee will decide on its acceptance. The complete text of the accepted technical papers must be submitted by 15 April Upon being accepted by the organisers, the abstracts will be available at the website: Your paper should be easily classified and allocated to one of the categories listed for technical papers or training sessions (see below). Suggestions for other subjects are welcome. All abstracts and technical papers are to be submitted in English, the official language of the forum (presentation and discussion) accompanied by simultaneous interpretation into German in one out of three parallel sessions. All lectures are scheduled to be 30 minutes in length (20 minutes for presentation, 10 minutes for discussion). Proposed technical papers which have been published or presented elsewhere prior to the end of the forum will not be accepted. In the event of subsequent publication a reference to the forum is to be made. Conference registration is free of charge for the presenter of a lecture which has been accepted for presentation. Technical papers welcome according to the following subjects: We graciously request your paper on the subjects specified below: Process gas compressors (rotary machines) Applications Oil & Gas Applications - Subsea compression, refinery - LNG / GTL, industrial gas CCS Applications - Efficiency improvements - Rotating equipment in CCS processes Chemical & Petrochemical applications Technology & Research Machine design Thermodynamics Materials Service and maintenance Showcases Compressed air systems Technology - Basic technologies - System design - Simulation Economics - Lifecycle costs - Financing instruments (buy, lease, contract) - Comparison Compressed air vs. electricity Energy efficiency - Energy management - System analysis - Energy efficient drives & controls - Regulations Applications - Applications taken from ComVac Application Center - Special applications for key-accounts EC-Directives Please send your abstracts to: VDMA Compressors, Compressed Air and Vacuum Technology Association Friedrich Klütsch Phone Fax friedrich.kluetsch@vdma.org

5 6 th EFRC Conference 2008 About the EFRC Founded in 1999, the EFRC European Forum for Reciprocating Compressors has been established as the international platform for reciprocating compressors in the process gas industry. The 6 th EFRC Conference will be held jointly with the 9 th VDMA Pump Users International Forum and the 2 nd VDMA Compressor Users International Forum consolidated as the International Rotating Equipment Conference. Reciprocating Process Gas Compressors and Systems Under the leading topic, Reciprocating Process Gas Compressors and Systems, the 6 th EFRC Conference will once again offer an ideal opportunity for compressor operators, manufacturers, contractors, researchers and scientists to: exchange their experiences, news and innovations regarding compressors and their applications in the process gas industries, present new solutions for compressor operators, demonstrate ideas for cost savings ideas for compressor operations, improve communication between compressor operators and manufacturers, attend the training session prior to the conference to enhance their technical understanding of a specific compressor- related subject (to be announced). Targeted industries Refinery Petrochemical industry Chemical industry Natural gas industry Industrial gases Power industry Compressor manufacturing Component manufacturing Service provision Engineering companies Contractors R&D organisations Universities What will the EFRC offer? As with the previous conferences, the 6 th EFRC Conference 2008 will offer: Training session for technicians and engineers covering a special topic in the afternoon of Oct. 27, 2008 Technical lectures and discussions in parallel sessions on Oct. 28 th 29 th, 2008 Accompanying technical exhibition covering the pumps and compressors industries Submission of abstracts Interested experts are requested to submit proposals for technical papers. In order to classify the lectures, all submitted abstracts should be related to the topics provided in the list below. Suggestions for other subjects will also be considered. The proposed technical papers must not have been previously published or presented elsewhere. The official language of the EFRC conference is English only. All abstracts and technical papers must be submitted in English. All presentations are to be held in English. All lectures are scheduled to be 30 minutes in length (20 minutes for presentation, 10 minutes for discussion). Conference registration is free of charge for the presenter of a lecture which has been accepted for presentation. Are you interested in presenting a technical paper? If you would like to submit a proposal for a technical paper, please return the enclosed reply form by no later than 10 December, The EFRC Organising Committee will decide on the acceptance in close cooperation with the programme committee. The complete text of the accepted technical papers must be submitted by 27 June, After acceptance by the organisers, the abstracts will be available at the conference website: Technical papers welcome according to the following subjects: Engineering of Compressor Plants Compressor Design Component Design Compressor Economics Operations Availability and Reliability Maintenance Overhaul & Revamping Diagnostics & Monitoring Controls Fluid Mechanics and Thermodynamics of Compression Cycles Simulations & Calculations Pulsations and Vibrations Corrosion Materials Tribology and Wear Acceptance and Test Methods Environmental Conservation Standards Please send your abstracts to: VDMA Compressors, Compressed Air and Vacuum Technology Association Friedrich Klütsch Phone Fax friedrich.kluetsch@vdma.org

6 Promoter Organiser Maschinenbau-Institut GmbH Frankfurt am Main Ust.-IdNr. VAT German Machinery and Plant Manufacturers Association (VDMA) e.v. Pumps + Systems Association, Compressors, Compressed Air and Vacuum Technology Association Germany Phone Fax , gudrun.rehberger@vdma.org Internet Chairmen: Dr. Horst Dieter Elsner (Pumps + Systems) Thomas Kaeser (Compressors, Compressed Air and Vacuum Technology) Official International Media Partner: In collaboration with* As well as Managing Director: Christoph Singrün EFRC Conference Secretary TNO Dr. René Peters TNO Stieltjesweg 1, P. O. Box AD Delft The Netherlands Phone +31 (15) Fax +31 (15) efrc@tno.nl Internet * Collaborating associations as far as nominated by Chairman: Dr. Siegmund Cierniak

7 Call for Papers Form Please return by 10 December 2007 to: International Rotating Equipment Conference VDMA Pumps + Systems Association, Compressors, Compressed Air and Vacuum Technology Association Mr. Friedrich Klütsch Phone Fax / nina.mangold@vdma.org Internet Author(s) Name, title First name Job, position Company, Institute, Authority Street, Place Country 1. I / We want to place the technical paper of Pump Users International Forum 2008 Compressor Users International Forum 2008 The 6 th EFRC Conference 2008 (Form continued overleaf)

8 2. Technical papers (Lecture: 20 minutes; discussion: 10 minutes) Subject of the paper submitted: Referring to the following subjects (See Call for Papers): Volume of abstract: 10 to 15 lines in Arial 10 Paper to be attached separately Note: Accepted abstracts will be available at the website (February 2008) 3. Technical exhibition I am / We are interested to participate as an exhibitor Please send information to: Name: Company: Address: Phone: 4. Informal pre-registration for attendance I am / We are interested to attend the forum. Please send information to: Name: Company: Address: Phone: Place and Date Signature and Company stamp