Once again the NFPC Annual Industry Exhibition is set to
|
|
- Richard Greer
- 5 years ago
- Views:
Transcription
1 January 2019 LATEST NEWS Message from the Director Tel No: +44(0) Once again the NFPC Annual Industry Exhibition is set to Mobile: be once more a great success with some 80 National and International Companies exhibiting from the world of Hydraulics, Pneumatics, Electronics and Control. FOC to attend including any of the Technical Lectures. Please let us know if you are planning to come along. You can register on our website, complete the attached form or just give us call. Industry Exhibition here at the NFPC on the 20 February NETWORK, MEET KEY COMPANY REPRESENTATIVES, SEE AND DISCUSS THE LATEST TECHNOLOGY PLAN FOR THE DAY- Attend the full day or just drop in as your time allows Arrival and Registration (Main entrance NFPC) We look forward to 9.30 Official Welcome and Opening of the Exhibition in Technical Centre 1. seeing you here. Exhibition and NFPC now officially OPEN with refreshments in the Marquee Pavilion See the details of the 10:45-11:30 GROUP 1 Lectures 11:45-12:30 GROUP 2 Lectures Technical Lectures on 2nd 12:30-14:00 Buffet lunch in Technical Centre 1 (Networking) page 14:00-14:45 GROUP 3 Lectures 14: Last opportunity to visit the Exhibition (refreshments in the Marquee Pavilion) 15:30 We all return to Technical Centre 1 for Speakers Open Forum the official close down of the event and PRIZE DRAW. PLANNED EXHIBITORS
2 RESERVATION FORM -Key Speakers and Technical Lectures All of our Speakers have a wealth of experience to offer. Each Lecture will last up to 45 minutes including questions Lectures are presented by: 10:45 to 11:30 Group 1 Lectures 11:45 to 12:30 Group 2 Lectures 14:00 to 14:45 Group 3 Lectures Sam Keating (Hydac Technology) Chris Brogli (Ross Controls) Brandon Coursey (Sun Hydraulics) Jack Hints (Balluff) Name Company Contact No HYDRAULIC FLUID RELATED NFPC Room F113 Tech 2 (Ground Floor) Speaker: Sam Keating Laboratory Manager- Hydac Technology UK Title- Correlation between Membrane Patch Colorimetry (MPC) test results and the differences observed between Particle Count data at 20 degrees and 80 degrees C in mineral oils. Synopsis- New oil samples have a low MPC and show negligible differences between particle counts between 20 and 80 degrees, however used samples begin to display differences between particle counts at the two temperatures. This indicates that deposits dissolve back into the oil at high temperatures and high MPC is not reflected in particle counts indicating that filter membrane colour is not due to varnish but other contaminants. SAFETY and HAZARDS RELATED NFPC Room F119 Tech 2 (Ground Floor) Speaker: Chris Brogli - Global Vice President of Safety Business Development-ROSS Controls Title : Fluid Power Assessment Requirement and Best Practices (Presentation 1 and 2) Synopsis: Presentation 1, will cover the requirements for fluid power safety and will look how hazards should be assessed. This will include a look at some best practices from across the Industry with specific examples of tools that are being used during assessments. Presentation 2, will provide an insight into the various methods for controlling hazardous energy for normal production maintenance, service and repair. The purpose is to understand the necessary interactions to address such hazards. SENSOR TECHNOLOGY and AUTOMATION RELATED NFPC Room F214 Tech 3 (First Floor) Speaker: Jack Hints Industry Manager for North Europe -BALLUFF Title Innovations in Hydraulic Position Sensing and Monitoring Synopsis: This presentation will highlight the latest technologies for the control, monitoring and feedback of automated mobile and industrial hydraulic applications. You will learn about new sensor technologies, offering simplified installation and enhanced diagnostics, as well as the latest in connectivity solutions all of which are enablers for your I 4.0. environment on both new and existing plant and equipment SMART TECHNOLOGY RELATED NFPC Room F212 Tech 3 (First Floor) Speaker: Brandon Coursey- Product Support Manager -SUN HYDRAULICS Title- The Millennial Machine Interface Synopsis: Within today s smart technology landscape, modern wireless technology is being increasingly deployed within the mobile and industrial sectors, with many resultant conveniences including time and cost related improvements. We will discuss during this session how millennials are shaping and impacting the future of our industry whilst explaining how Sun Hydraulics is pushing the envelope.
3 If you are planning to attend feel free to complete the form below Industry Exhibition- 20 February 2019 (9am-4pm) Drop-in or attend full day Planned Attendance- Registration Form Please complete and return to John R Savage- Director NFPC- jsavage@nfpc.co.uk I plan to attend this Exhibition: NAME. Company Address Tel No. Estimated Arrival Time. Other NEWS ITEMS Seminars and New Courses here at the NFPC - Computer Simulation of Hydraulic System SEE ATTACHED FLYER. Attendance is FREE OF CHARGE- Let us know if you plan to attend -Machinery Safety & Compliance Training- SEE ATTACHED FLYER New CETOP Level 2 Competence Based Qualification relating to Mobile Hydraulics and Control- as a follow on from the existing NFPC Stage 2 Mobile Hydraulics. Launch date for this 5 day programme is the 18 March visit the website for full details Since investing in the development of our World Class facility to support our courses relating to Pumps and Control Systems, we are offering our very practical 3 day course every month BREAKING NEWS NFPC receives APPROVAL from the IAgrE, placing the NFPC on the Engineering Council database as being approved by AgrE as meeting the educational needs associated with professional registration.
4 Computer Simulation of Hydraulic Systems Message from Leigh Gillard- MBSE Portfolio Developer at Siemens Industry Software Simulation and Test Ltd. The use of computer models increases in all aspects of Engineering. The NFPC and Siemens have joined forces to help the UK Hydraulics Industry understand, the what, the why and the how computer simulations of Hydraulics Systems can be used to reduce risk and better understand system performance. Join us at the NFPC (Free of Charge) on the 26 February 2019 and find out more. Agenda 9: Coffee/Tea Welcome John R Savage and Leigh Gillard How Hydraulic Simulation is used in JCB by Dariusz Pioro- Simulation Engineer Use of Digital Models in Hydraulic Applications (NFPC Drill Rig Circuit) Overview of the NEW 1 Day Introduction Courses delivered at the NFPC Introduction to Hydraulic Simulation Buffet Lunch and an opportunity to view the facilities at the NFPC To Reserve your place/s - Contact: Bookings & Customer Liaison (Anne Clarke) Tel: + 44 (0) aclarke@nfpc.co.uk Let us know if you have any special dietary needs The NFPC offers an extensive range of courses involving Hydraulics Pneumatics, Applied Electronics and Control, plus a range of CETOP Competence Based Qualifications. We also offer On-Line Self Assessments to assist you in selecting the most cost effective course progression route. The NFPC has World Class Practical facilities and 10 of the Uks top Training Engineers from UK Industry. Visit our website-
5 AMC Machinery Safety & Compliance Training 1 Day Modules for 2019 (9am-4pm) Location NFPC Ltd Carlton Road Worksop, Notts S81 7HP EACH Module will be presented by Les Young - MD and Principal Consultant at AMC. Les has over 14 years of experience relating to machine safety. He is a TUV Rhineland Certified Functional Safety Engineer, a Specialist Member of the International Institute for Safety and Risk Management and a Technical Member of IOSH and the IET. Each module will provide a REAL WORLD approach to clients needs and also the opportunity to seek advice relating to your specific applications. Who are these modules aimed at? Anyone responsible for the Safety of Machinery - Including: Site Engineers, Maintenance Managers / Engineers and Electricians and anyone involved in Machinery Safety and Design. Module 1-29/4/19 Module 2-13/5/19 Module 3-20/5/19 Module 4-3/6/19 CE Marking of Machinery (and / or / including the UK equivalent post Brexit), including how to comply with the Essential Health and Safety Requirements of the Machinery Directive, an introduction to the risk assessment of machinery, creation of the technical file and the Declaration of Conformity or Incorporation. On completion of this module, you will have a thorough understanding of the needs and requirements to CE mark machinery. Standards 1: The Electrical Systems of Machinery - Design, Construction and Compliance plus Emergency Stop Controls, Functions, Types, Selection and Positioning. Reference to Standards IEC EN and EN ISO On completion of this module, you will have a thorough understanding of the International Standards for Electrical design and build of Control Systems for machines and their maintenance. You will also fully appreciate the requirements for Emergency Stops on machinery. Standards 2: The Physical Guarding of Machinery Specification, Design and Compliance. Plus Machinery Guard Interlocks - Types, Selection and Positioning. Machinery Guarding - Reach and Safety Distances. Machinery Minimum Distances to Prevent Crushing. Light Curtain and ESPE Selection, Positioning and the locating calculations. This module will involve Calculations (bring a calculator). Reference to Standards: EN ISO 14120, 14119, 13857, 13854, On completion of this module, you will have a thorough understanding of the Guarding requirements and guarding interlocks together with that of Light Curtain selections and associated calculations, as well as the prevention of crushing. Standards 3: Machinery Two Hand Control Devices - Types, Selection and Design. An introduction to Safety Related Control Systems of Machines including the Performance level determinations and Wiring Architectures, Diagnostic Coverage and Common Cause Failures. Hydraulic and Pneumatic Systems of Machines- General Safety Control Principles. Industrial Robots-Safety and Integration- Emphasis will be placed on Part 2 of the standard applicable to the Installer and End Users. Reference to: EN ISO-13851, , 4413, 4414, 10218) On completion of this module, you will know the types of Two Hand Controls and their selection criteria for selection, the fundamentals of machinery Safety Related Control Systems including the importance of the Wiring Architecture and system performance Levels. Please Read FULL Instructions on Page 2
6 Attendance Arrangements and Costs: OPTION 1-Each MODULE can be attended as required at an individual cost of OPTION 2-MODULES 1 to 4 can be block booked at a cost of On completion of all FOUR modules, we are offering a FINAL WRITTEN EXAMINATION and CERTIFICATION at a unit cost of OPTION 3- All four Modules plus Examination = In all cases, each MODULE will take a maximum of 12 Candidates and will not be offered for attendance levels below 4 candidates per course module To Reserve your place/s - Contact: Bookings & Customer Liaison (Anne Clarke) Tel: + 44 (0) aclarke@nfpc.co.uk PLEASE ENSURE THAT YOU STATE WHAT OPTIONS YOU REQUIRE WHEN CONFIRMING YOUR BOOKING Other MODULES to be launched in 2019 We plan to introduce: MODULE 5 - PUWER Assessment of Machinery MODULE 6 Engineering Design and Remediation of machines. If these are of interest to you, feel free to let us know. The NFPC offers an extensive range of courses involving Hydraulics Pneumatics, Applied Electronics and Control, plus a range of CETOP Competence Based Qualifications. We also offer On-Line Self Assessments to assist you in selecting the most cost effective course progression route. Visit our website- ASTUTE MACHINERY CONSULTANTS. For more information Visit their website- To reserve places on any of our courses visit our website or Contact Anne Clarke, Bookings & Customer Liaison Tel No aclarke@nfpc.co.uk For any technical information relating to courses Contact John R Savage, Director Tel No , Mob jsavage@nfpc.co.uk
MOE125 Offshore Well Construction
MOE125 Offshore Well Construction H.H. Sheikh Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction: This five-day course provides a fundamental understanding
More informationDE059: Hydrocarbon Production Operations
DE059: Hydrocarbon Production Operations DE059 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: This five-day course will provide the participants with an integrated view of the hydrocarbon
More informationFluid Technology Automation Technology smart buildings Technology
Fluid Technology Automation Technology smart buildings Technology THE PARTNER OF Higher Standards 002003 Hainzl Technology for Higher Standards Engineering & system competence 004-005 Production ServicE
More informationIE045: Practical Process Control & Instrumentation: Measurement and Sensors
IE045: Practical Process Control & Instrumentation: Measurement and Sensors IE045 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: Globalization has placed increasing demands on modern process
More informationSpecialist Training and Coaching in HSE Management
Specialist Training and Coaching in HSE Management An Intensive 5 Day Programme that is the Global Benchmark for Occupational Safety & Health Qualifications Limited to 15 participants! NEBOSH International
More informationTHERE S A RISK IN YOUR BUSINESS THAT YOU CAN T SEE.
THERE S A RISK IN YOUR BUSINESS THAT YOU CAN T SEE. Over 30 years we have worked with every type of compressed air system and safety critical control systems. We understand how they work, why they work,
More informationDE027: X-mas Tree & Wellhead Operations, Maintenance & Testing
DE027: X-mas Tree & Wellhead Operations, Maintenance & Testing DE027 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: Wellhead and x-mas tree is the main equipment for oil production, water
More informationTHE BEST MINDS IN OIL AND GAS ARE AT AUSTRALIA S LEADING INDUSTRY EVENT
THE BEST MINDS IN OIL AND GAS ARE AT AUSTRALIA S LEADING INDUSTRY EVENT Platinum Principal s 8,257 TOTAL VISITOR ATTENDANCE GROW YOUR BUSINESS Reasons to exhibit at AOG AT 9,745 TOTAL ATTENDANCE (including
More informationICE028 Instrumentation for Non- Instrumentation Engineer
ICE028 Instrumentation for Non- Instrumentation Engineer H.H. Sheikh Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction: Instrumentation is the science
More informationFE014: Cathodic Protection Systems: Design, Fabrication, Installation, Operation & Repair
FE014: Cathodic Protection Systems: Design, Fabrication, Installation, Operation & Repair FE014 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: The aim of this five-day intensive course is
More informationFRIDAY, 6 TH JULY 2012
The Northern NHS ESTATES TRAINING ADVISORY GROUP Present a one-day conference on: to be held on at THE CONFERENCE CENTRE, Wrightington, Wigan and Leigh NHS Foundation Trust, Wrightington Hospital, Hall
More informationENGINEERING SHORT COURSES
www.forthvalley.ac.uk ENGINEERING SHORT COURSES 02 FORTH VALLEY COLLEGE Our mission is to Make Learning Work and our vision, shaping the future, developing a world class service! The College is based in
More informationHARTING Coaxial and Metric Connectors
HARTING Coaxial and Metric Connectors HARTING Worldwide Transforming customer wishes into concrete solutions The HARTING Technology Group is skilled in the fields of electrical, electronic and optical
More informationArts, Culture and Sustainability: Building Synergies between Asia and Europe 6-7 December 2009 Danish Cultural Institute, Copenhagen
Arts, Culture and Sustainability: Building Synergies between Asia and Europe 6-7 December 2009 Danish Cultural Institute, Copenhagen Vision Group Workshop Organised by the Asia-Europe Foundation in partnership
More informationMSc Chemical and Petroleum Engineering. MSc. Postgraduate Diploma. Postgraduate Certificate. IChemE. Engineering. July 2014
Faculty of Engineering & Informatics School of Engineering Programme Specification Programme title: MSc Chemical and Petroleum Engineering Academic Year: 2017-18 Degree Awarding Body: University of Bradford
More informationTraining Overview. Europe 2015
Training Overview Europe 2015 Welcome to the Synergy Health Applied Sterilisation Technologies (AST) Training Brochure The AST training programme offers a variety of opportunities to organisations wishing
More informationM+R: WHY PARTICIPATE?
M+R: WHY PARTICIPATE? Six A-players give the answer! Antwerp, 10th November 2016 - M+R promises to live up to its reputation of being the ultimate event in Belgium for measurement and regulation technology
More informationDE123 Advanced Drilling Practice Technology
DE123 Advanced Drilling Practice Technology H.H. Sheikh Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction: This five-day advanced training course provide
More informationMU064: Mechanical Integrity & Reliability in Refineries, Petrochemical & Process Plant
MU064: Mechanical Integrity & Reliability in Refineries, Petrochemical & Process Plant MU064 Rev.001 CMCT COURSE OUTLINE Page 1 of 7 Training Description: This course will provide a comprehensive review
More informationOil and Gas Course Descriptions
Drake Well Museum StatoilHydro Oil and Gas Course Descriptions StatoilHydro StatoilHydro Saudi Aramco Woodside What We Do We specialize in oil and gas industry "overview" courses because we believe that
More informationEE223D: Distribution Power Transformer
EE223D: Distribution Power Transformer Aug 07-09, 2018 / Dubai EE223 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: This intensive course is designed to provide participants with the skills
More informationHELD ON WEDNESDAY 26 th APRIL 2017 AT md. AT THE UNIVERSITY OF NOTTINGHAM.
REPORT OF THE 1 st ANNUAL GENERAL MEETING, (AGM), OF THE FUEL AND ENERGY RESEARCH FORUM, (FERF), AND THE 28 th ANNUAL GENERAL MEETING OF THE COAL RESEARCH FORUM, (CRF). THE FERF/CRF AGM. HELD ON WEDNESDAY
More informationICE065 Practical Process Control & Instrumentation:
ICE065 Practical Process Control & Instrumentation: Measurement & Sensors H.H. Sheikh Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction: Globalization
More informationForged parts for life.
Forged parts for life www.gedore-forge.com iforge by GEDORE Competence in forging for over 150 years At GEDORE's forging centre in Remscheid, the company forges individual items of the highest quality
More informationPart 7: Thermography
INTERNATIONAL STANDARD ISO 18436-7 Second edition 2014-04-01 Condition monitoring and diagnostics of machines Requirements for qualification and assessment of personnel Part 7: Thermography Surveillance
More informationThe Product Journey. An insight into Design, Sterilisation, Testing, Clinical Trial and Accreditation
The Product Journey An insight into Design, Sterilisation, Testing, Clinical Trial and Accreditation This one day conference will be held on 16th September The conference day will include speakers from
More informationTECHNOLOGY LTD. Components, Systems and Service all from one Company. United Kingdom
Components, Systems and Service all from one Company United Kingdom HYDAC TECHNOLOGY LTD is a UK registered company, founded over 35 years ago. The company was originally formed as a distribution point
More informationAGM & Conference. 25 th January Marketing Pack
AGM & Conference 25 th January 2018 Marketing Pack Background Outstanding, Best conference I have been to for years, Fantastic well informed speakers just a few comments made by some of the near 100 attendees
More informationManual Transmission Technology, Trends, and Future Directions An Industry Seminar Sponsored by The Lubrizol Corporation
Educational Content Reviewed and Facilitated by SAE International Professional Development and Manual Transmission Technology, Trends, and Future Directions An Industry Seminar Sponsored by The Lubrizol
More informationTraining: Industry Overview
The Fundamentals of Subsea Date & Time: Wednesday, November 4, 2015 9:00 am 4:30 pm Host Company: EIC Location: EIC, 11490 Westheimer Rd Ste 110, Houston, TX, 77077 Contact: Natalia Bueno Email: natalia.bueno@the-eic.com
More informationDrilling Courses Overview Pressure control and drilling equipment course offering
Drilling Courses Pressure control and drilling equipment course offering Content Introduction 3 Pressure control equipment Multiplex (MUX) control system overview Mark III subsea BOP control system electrical
More informationAdvertising & Media Sponsorship Pack
The world s largest annual subsea exhibition & conference Aberdeen Exhibition & Conference Centre 5-7 February 2019 Advertising & Media Sponsorship Pack Background Subsea Expo is the world s largest annual
More informationGE018: Interpretation of Engineering Drawings
GE018: Interpretation of Engineering Drawings GE018 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: This course, developed out of best practice recommendations and extensive industry experience,
More informationThe power behind a Leader
The power behind a Leader For Betonrossi, success is the result of ideas developed through intuition, experience, research and technology. Great ideas for the construction world and even greater resources.
More informationRoot Cause Failure Analysis In Rotating Machinery
Root Cause Failure Analysis In Rotating Machinery -Causes & Avoidance- A must course to understand the process of machinery failures, help with the job and add value to the business Abu Dhabi 16 20 March
More informationPost Show Report 2017
The 16th International Exhibition for Pumps, Compressors, Valves, Actuators and Engines Post Show Report 2017 Organised by Coorganisers Exhibitions partner Strategic media-partner General media partner
More informationIn practice, the question is frequently raised of what legislation applies to clamping devices that are intended to be used on machines.
VDMA Position Paper (Version from 22 nd June, 2017) Machine tools and manufacturing systems Precision Tools Clamping devices for use on machines This position paper is intended as information on how clamping
More informationITU Telecom World 2018 SMART ABC
Durban 10-13 September ITU Telecom World 2018 SMART ABC Artificial Intelligence Banking Cities Organized by ITU-T Smart ITU Smart solutions make innovative use of ICTs to improve quality of life, efficiency
More informationEngineering and Design
End of Course (EOC) Bank Blueprints Engineering and Design Table of Contents Table of Contents... 1 About Test Blueprints... 2 Engineering Design... 3 Engineering Principles... 4 Manufacturing Operations...
More informationTurning the wheels of your success
INDUSTRIAL SERVICES Turning the wheels of your success A comprehensive package of integrated services combining traditional certification and inspection with innovative business solutions based on the
More informationHorizontal and Multilateral Wells
Training Title Horizontal and Multilateral Wells Training Date & Duration Will be held at any 5 star hotel- 5 Days Horizontal and Multilateral Wells 5 days 26-30 Oct 2013 US $ 4,250 Abu Dhabi Training
More information2008 Course Programs Schedule
2008 Course Programs Schedule Basic Laboratory Safety Laboratory Safety Biostatistics for the Non-Statistician - Basic Applied cgmps for Pharmaceutical and Allied Industries Good Clinical Practices (GCP)
More informationFPSO Design and Technology
An Intensive 5 Day Training Course FPSO Design and Technology 14-OCT-18 13-17 Oct 2019, Dubai www.petroknowledge.com FPSO Design and Technology WHY CHOOSE THIS TRAINING COURSE? This 5-day Design and Technology
More informationRobot e.do. Certifications, Service, Warranty. Rel Versions: 4 axes and 6 axes
Robot e.do Rel. 00 - Versions: 4 axes and 6 axes Certifications, Service, Warranty Directives and reference standards according to which the Robot has been certified. Terms, conditions to be fulfilled
More informationMathys & Squire. Agri-Tech Intellectual Property Rights in Europe. mathys-squire.com
Mathys & Squire Agri-Tech Intellectual Property Rights in Europe mathys-squire.com About Mathys & Squire Ranked Tier 1 in Legal 500, Mathys & Squire is one of Europe s most highly regarded intellectual
More informationMODEL-BASED DEVELOPMENT OF AUTOMOTIVE EMBEDDED SOFTWARE IN COMPLIANCE WITH ISO 26262: CHALLENGES & EFFECTIVE SOLUTIONS November 21 22, 2016
MODEL-BASED DEVELOPMENT OF AUTOMOTIVE EMBEDDED SOFTWARE IN COMPLIANCE WITH ISO 26262: CHALLENGES & EFFECTIVE SOLUTIONS November 21 22, 2016 Highlights Developing safety-critical software in compliance
More informationOffshore Structure Design, Construction & Maintenance
An Intensive 5 Day Training Course Offshore Structure Design, Construction & Maintenance 08-12 Sep 2019, Abu Dhabi 01-OCT-18 This course is Designed, Developed, and will be Delivered under ISO Quality
More informationAMTEC Modules. AMT 102: General PM and Predictive Maintenance AMT 1021: Basic PM AMT 1022: Advanced Technologies
AMT 100: Computer Literacy AMT 1001: Orientation to Computer Systems AMT 1002: Operating Systems AMT 1003: Computer Applications AMT 1004: Internet/Intranet AMT 101: Fluid Power and Electrohydraulics/Pneumatics
More informationTCT + Personalize Asia 2016 [ POST SHOW REPORT ] Organized by
TCT + Personalize Asia 2016 [ POST SHOW REPORT ] www.tctasia.com.cn Organized by 7,000 sqm 110 Exhibitors 10,521 Visitors 41 Speakers 530 Conference Delegates 100+ Media Coverage Visitors Primary Industry
More informationHydrocarbon Production Operations
An Intensive 5 Day Training Course Hydrocarbon Production Operations The Role of Technology in Operations 01-05 Oct 2017, Dubai 05-MAR-17 This course is Designed, Developed, and will be Delivered under
More informationDIGITALISING MANUFACTURING CONFERENCE 2017
DIGITALISING MANUFACTURING CONFERENCE 2017 Driving competitiveness and productivity of UK industry through digitalisation 30 & 31 October 2017 The Manufacturing Technology Centre Sponsored by: Conference
More informationThe State of Tech Treasury Day 2018
14.6.18 The State of Tech Treasury Day 2018 2 The State of Tech What is it actually? 3 12 months ago We made three predictions 4 #1 AI is the new UI 5 Amazon shipped more than 10 million Echo smart speakers
More informationConference Preview. Transforming Service Delivery CUSTOMER CONFERENCE. 28th - 29th November 2017 DoubleTree by Hilton Hotel, Milton Keynes
MANAGED SERVICES Conference Preview Transforming Service Delivery CUSTOMER CONFERENCE 28th - 29th November 2017 DoubleTree by Hilton Hotel, Milton Keynes WELCOME Welcoming Castleton Customer delegates
More informationELECTRICAL EQUIPMENT. Inspection. H.H. Sheik Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E
ELECTRICAL EQUIPMENT Inspection H.H. Sheik Sultan Tower (0) Floor Corniche Street Abu Dhabi U.A.E www.ictd.ae ictd@ictd.ae Course Introduction: The course begins with the fundamental principles that always
More informationThe 10-Day International Gas Business Management
An Intensive 2-Week Training Course The 10-Day International Gas Business Management 20-NOV-18 15-26 Apr 2019, Mexico City 19-30 Aug 2019, Rio De Janeiro 18-29 Nov 2019, New York 09-20 Dec 2019, Bogota
More informationT e l N o : F a x N o : E m a i l : a i s h c m c - m e. c o m w w w. c m c - m e.
EE179: Electrical Fault Analysis: Causes, Detection & Remedies EE179 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: It is essential to know the Short Circuit Current and KVA that the system
More informationCall for Papers. Düsseldorf, 28 th 29 th October Pump Users. Compressor Users. International Forum International Forum 2008
International Rotating Equipment Conference Düsseldorf, 28 th 29 th October 2008 Compressor Users International Forum 2008 Pump Users International Forum 2008 Call for Papers International Rotating Equipment
More informationSEMMME219 SQA Unit Code HF3V 04 Operating CNC turning machines
Overview This standard identifies the competences you need to carry out turning operations, in accordance with approved procedures, using Computer Numerical Control (CNC) machines, or CNC machining centres.
More informationThe Medical Device Regulation: Transitioning between old and new
Association of British Healthcare Industries The Medical Device Regulation: Transitioning between old and new www.abhi.org.uk www.bdia.org.uk Introduction In May 2017, the new Medical Device Regulation
More informationEE059: Transformer Operation, Maintenance, Diagnosis & Testing
EE059: Transformer Operation, Maintenance, Diagnosis & Testing EE059 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: Power and distribution transformers are essential devices in electricity
More informationGeneral Purpose Drives
AC Variable Speed Drive General Purpose Drives Dedicated to Low Power Applications 0.37kW 11kW / 0.5HP 15HP 200 480V 3 Phase Input AC Variable Speed Drive 0.37kW 11kW / 0.5HP 15HP 110 480V Single & 3 Phase
More informationCOURSE MODULES LEVEL 3.1 & 3.2
COURSE MODULES LEVEL 3.1 & 3.2 6-Month Internship The six-month internship provides students with the opportunity to apply the knowledge acquired in the classroom to work situations, and demonstrate problem
More informationEE030: Circuit Breaker & Switchgears Inspection, Maintenance, Design, Repair & Troubleshooting
EE030: Circuit Breaker & Switchgears Inspection, Maintenance, Design, Repair & Troubleshooting EE030 Rev.001 CMCT COURSE OUTLINE Page 1 of 6 Training Description: This course is designed to update participants
More informationOil can talk. We understand the message.
Oil can talk We understand the message www.oelcheck.com Oil can talk We understand the message High performance and still full of power reserves or already used and contaminated and posing serious risks
More informationDefence and security engineering
Defence and security engineering 2018-2019 Symposia Symposia at Shrivenham provides a forum to Government agencies, military and civilian, industry and research establishments for the exploration and exchange
More informationInternational Conference VENI- CE Citizen Observatories for natural hazards and Water Management. 27Th To 30Th November
International Conference VENI- CE 20 18 27Th To 30Th November Citizen Patronages Citizen Scientific Partners In collaboration with Technological workshops, special sessions and presentations of projects
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 18436-5 First edition 2012-11-01 Condition monitoring and diagnostics of machines Requirements for qualification and assessment of personnel Part 5: Lubricant laboratory technician/analyst
More informationAUTOMATION & MECHATRONIC SYSTEMS COURSE MODULES
AUTOMATION & MECHATRONIC SYSTEMS COURSE MODULES A bionic arm, a self-driving car and an autopilot train system - these are some icons of the amazing world of automation technology that are brought about
More informationVTU BOSCH REXROTH CENTER OF COMPETENCE IN AUTOMATION TECHNOLOGIES
VTU BOSCH REXROTH CENTER OF COMPETENCE IN AUTOMATION TECHNOLOGIES The uniqueness of this training centre lies in its state of the art technology, world class equipment, training kits, hardware, software,
More informationEvent Industry Global Market Research
Event Industry Global Market Research January 2013 Survey commissioned by IML Worldwide and conducted during November and December 2012. Survey questionnaire distributed to database of existing IML Worldwide
More informationTraining. Education CALENDAR FEDEGARI TECH CENTERS DM#407036
2016 CALENDAR COLLABORATION IN THE LIFE SCIENCES WORLD Valued customer, The need to increase efficiency and reliability in pharmaceutical manufacturing presents firms with unique opportunities to develop
More informationSmartBrains. Process Plant Layout & Piping Design engineering. Institute of Oil and Energy. What You Will Learn...
SmartBrains Institute of Oil and Energy Oil & Energy Process Plant Layout & Piping Design engineering What You Will Learn... Introduction to Industry. Role of a Piping Engineer in various fields of industry.
More information17 & 18 OCT DIGITALFIRST.BE
17 & 18 OCT. 2018 DIGITALFIRST.BE DIGITAL FIRST, YOUR BUSINESS DIGITAL ROADMAP Thanks to more than 10 years of experience, Digital First has evolved and recognized as the leading digital event in Belgium
More informationWHERE THE WORLD MEETS INNOVATION
EN 3 www.siroco.com.pt Put all you are into the smallest thing you do. Kathy Fehst CEO It s a simple way to describe us. We like what we do and we are committed, to us, to our employees, to our customers,
More informationProgramme Specification
Programme Specification Title: Electrical Engineering (Power and Final Award: Master of Engineering (MEng (Hons)) With Exit Awards at: Certificate of Higher Education (CertHE) Diploma of Higher Education
More informationThe Smart Production Laboratory: A Learning Factory for Industry 4.0 Concepts
The Smart Production Laboratory: A Learning Factory for Industry 4.0 Concepts Marco Nardello 1 ( ), Ole Madsen 1, Charles Møller 1 1 Aalborg University, Department of Materials and Production Fibigerstræde
More informationInternational. September 29th October 3rd 2014 Brno, Czech Republic. 56 th International Engineering Fair
56 th International Engineering Fair Measuring, control, automation and regulation technology 1 International Engineering Fair September 29th October 3rd 2014 Brno, Czech Republic International Engineering
More informationSPE Drilling Systems Automation Technical Section and the DSA Roadmap Initiative. John Macpherson
SPE Drilling Systems Automation Technical Section and the DSA Roadmap Initiative John Macpherson Drilling Systems Automation Involves the control of the drilling process by automatic means, ultimately
More informationInstrumentation Design & Detailed Engineering
TRAINING COURSES BROCHURE Instrumentation Design & Detailed Engineering PROGRAM OUTLINE IDE 101. Introduction to Oil & Gas Industry and EPC Contracts. IDE 102. Fundamentals of Process Instrumentation IDE
More information9 th ANNUAL ROMANIA OIL & GAS Conference & Exhibition 2017
9 th ANNUAL ROMANIA OIL & GAS Conference & Exhibition 2017 21 NOVEMBER 2017 Ramada Parc Hotel - Bucharest, Romania Organized by: Co-organizer: Under the patronage of: With the support of: MINISTERUL ENERGIEI
More information6 & 7 December. current concepts for. Smart health in orthopaedics. congress.
9th edition 6 & 7 December 2018 congress Trans-atlantic current concepts for Smart health in orthopaedics Congress Guide 2018 It is our pleasure to announce the 9 th IMUKA Congress The European Current
More informationIndustrial Innovation Information Days Brussels 3-4 October 2017
Industrial Innovation Information Days Brussels 3-4 October 2017 NMBP Programme Parallel Sessions OPEN INNOVATION TEST BEDS Calls 2018/2019 Helene CHRAYE, HoU Unit D3 DG Research & Innovation A joint presentation
More informationNew concepts are emerging frequently in various fields such as: microprocessor sensors,
EMERGENCY SHUT DOWN SYSTEMS IN ONSHORE AND OFFSHORE PROCESS OPERATIONS J PEARSON, PRINCIPAL SPECIALIST INSPECTOR HEALTH & SAFETY EXECUTIVE LIVERPOOL SYNOPSIS This paper describes some of the latest developments
More informationCORGI News. Are you focusing on your personal development? Electrical Safety Awareness in Social Housing CORGI. Expect more from CORGI.
July 2013 Are you focusing on your personal development? With so much happening in the social housing sector, we are more conscious than ever about providing new and innovative ways to help our clients
More informationMANAGEMENT ACCOUNTING CONFERENCE WHERE BUSINESS LEADERS ARE MADE MELBOURNE AUGUST 2017 RYDGES MELBOURNE
MANAGEMENT ACCOUNTING CONFERENCE WHERE BUSINESS LEADERS ARE MADE MELBOURNE 14 15 AUGUST 2017 RYDGES MELBOURNE BREXIT. TRUMP. UBER. AIRBNB. The decisions and advancements these disruptors and organisations
More informationAPPROVAL CRITERIA FOR GCE AS AND A LEVEL DESIGN AND TECHNOLOGY
APPROVAL CRITERIA FOR GCE AS AND A LEVEL DESIGN AND TECHNOLOGY JULY 2016 Contents Page number Introduction 1 Subject aims and objectives 2 Subject content 3 Core technical principles 3 Core designing and
More informationUNIT-1 INTRODUCATION The field of robotics has its origins in science fiction. The term robot was derived from the English translation of a fantasy play written in Czechoslovakia around 1920. It took another
More informationTraining. For SE All-Electric, El-Exis SP, Systec and Van Dorn legacy machines and controls 2018 Schedule
Training. For SE All-Electric, El-Exis SP, Systec and Van Dorn legacy machines and controls 2018 Schedule Pre-scheduled and customized technical training is available at: Your facility Our Tech Center
More informationDEPUIS project: Design of Environmentallyfriendly Products Using Information Standards
DEPUIS project: Design of Environmentallyfriendly Products Using Information Standards Anna Amato 1, Anna Moreno 2 and Norman Swindells 3 1 ENEA, Italy, anna.amato@casaccia.enea.it 2 ENEA, Italy, anna.moreno@casaccia.enea.it
More informationDEPARTMENT OF ELECTRONIC & MECHANICAL ENGINEERING
Department of Electronic & Mechanical Engineering DEPARTMENT OF ELECTRONIC & MECHANICAL ENGINEERING 144 The courses in the Department of Electronic and Mechanical Engineering are aimed at students who
More informationSafety of programmable machinery and the EC directive
Automation and Robotics in Construction Xl D.A. Chamberlain (Editor) 1994 Elsevier Science By. 1 Safety of programmable machinery and the EC directive S.P.Gaskill Health and Safety Executive Technology
More informationIE047: TETRA Radio Telecoms System
IE047: TETRA Radio Telecoms System IE047 Rev.001 CMCT COURSE OUTLINE Page 1 of 8 Training Description: Terrestrial Trunked Radio (TETRA) comprises of digital trunked mobile standards developed by the European
More informationTech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) NUT SPLITTER. Max.
SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
More informationSICK AG WHITE PAPER SAFE ROBOTICS SAFETY IN COLLABORATIVE ROBOT SYSTEMS
SICK AG WHITE PAPER 2017-05 AUTHORS Fanny Platbrood Product Manager Industrial Safety Systems, Marketing & Sales at SICK AG in Waldkirch, Germany Otto Görnemann Manager Machine Safety & Regulations at
More informationDIGITAL ENTERPRISE FOR CHEMICALS AND REFINING
DIGITAL ENTERPRISE FOR CHEMICALS AND REFINING ROUND TABLE PERSONAL INVITATION NOVEMBER 22, 2017 The Floating Pavilion, Rotterdam, The Netherlands FROM HYPE TO REALITY TO RESULTS THE PROOF OF THE PUDDING
More informationMonopile Upending Tool (MP-UT)
Monopile Upending Tool (MP-UT) Remotely controlled, safe and efficient upending of large monopiles Application + + Construction of Offshore Wind Farms (OWFs) Monopile Foundations Installation Short Description
More informationISO INTERNATIONAL STANDARD. Robots for industrial environments Safety requirements Part 1: Robot
INTERNATIONAL STANDARD ISO 10218-1 First edition 2006-06-01 Robots for industrial environments Safety requirements Part 1: Robot Robots pour environnements industriels Exigences de sécurité Partie 1: Robot
More informationGAME DEVELOPMENT DESIGN
GAME DEVELOPMENT DESIGN 21-22 February 2019 Pune EVENT OVERVIEW The Indian gaming industry is at a turning point. It is set to become one of the largest and fastest growing game markets in the world. With
More informationIntroduction to Fitness For Service November 10, 2016, University of Alberta, Edmonton.
Advancing Your Career! November 10, 2016 University of Alberta Engineering Teaching and Learning Center, 6th floor room 060 (ETLC 6 060) 116 Street NW., Edmonton, AB T6G 2V4 About This Workshop This workshop
More informationPart 1: Common symbols
INTERNATIONAL STANDARD ISO 6405-1 Third edition 2017-02 Earth-moving machinery Symbols for operator controls and other displays Part 1: Common symbols Engins de terrassement Symboles pour les commandes
More information