AquaCLAD Water-Reducible Rust Preventative Alkyd
|
|
- Oswin Eaton
- 5 years ago
- Views:
Transcription
1 AquaCLAD 1600 Water-Reducible Rust Preventative Alkyd A rust preventative coating for interior and exterior steel in mild to moderate industrial environment. Recommended For Features Refinish Market High Hiding Trailer and Fleet Excellent Color and Gloss Retention Equipment Manufacturers Outstanding Flow and Leveling Metal Doors and Windows Single/Two Component Package Wrought and Ornamental Iron VOC Compliant Quick-Dry Properties Application: Average Dry Time: Air-assisted airless, HVLP, or conventional spray. To touch 1-1 ½ hours (at 77 F / 25 C). Resistance To: Dry Heat to 150 F - Sustained Dry Heat to 250 F - Intermittent Weather - Excellent Oil Spills - Excellent Moisture - Good Abrasion - Good Solvent - Good Petroleum - Excellent Chemical Fumes - Good Color Retention - Excellent NOTE: Catalyzing enhances all resistance. Theoretical Coverage at 1 mil: Thinning: Finish: 486 sq. ft. per gallon, depending on color. The actual coverage will be less, depending on application technique, job conditions, and type of surface to be coated. No thinning required for most spray applications. If thinning is necessary, consult Technical Bulletin. High Gloss % Solids by Volume: Average of 30%, depending on color % Solids by Weight: Average of 45%, depending on color Pigment Type: Solvent Type: Vehicle Type: Viscosity at 77 F (25 C): Physical Properties: Caution: Chemical Resistant Glycol Ether Blend Water-Reducible Alkyd Krebs Units VOC Actual: 144 g/l VOC Regulatory: 340 g/l Weight of Volatiles: 63.3% Weight of Exempt: 50.8% Volume of Exempt: 57.7% Density: 1,144 g/l Recommended application up to 2.0 mils dry film thickness per coat. Heavy applications exceeding this thickness may result in slow dry.
2 TECHNICAL BULLETIN 1600 Series WR Rust Preventative Alkyd Type Water-reducible alkyd Intended Use A rust preventative coating for interior and exterior steel in mild to moderate industrial environment. FOR INDUSTRIAL USE ONLY Chemical Resistance Resistance to dry heat up to 150 F. Excellent resistance to weather, oil spills, and petroleum. Good resistance to moisture, abrasion and solvents. Chemical fumes do very well in sulfide resistant colors. Surface Preparation Dependent on coating use. Refer to SURFACE PREPARATION Section. Application Apply by air assisted airless, HVLP, or conventional spray (where local regulations permit). Brush or roller only recommended for field repair. Colors Standard shop colors. Custom matches available upon request. Recommended Film Thickness Up to 3.0 mils DFT per coat. FILM THICKNESS PER COAT Spray mils DFT Brush or Roller 2.0 to 2.5 mils DFT Theoretical Coverage at 1 mil 486 sq. ft. per gallon, depending on color. The actual coverage will be less, depending on application technique, job conditions, and type of surface to be coated. Drying Times at 77 F (25 C) Between Coats: 15 minute Tack Free: 1 hour Dust Free: 1 hour 45 min Tape: 4 hours 45 min Print Free: 6 hours 30 min Force Dry at 140 F: 1 ½ hours after tack free Curing Time at 77 F (25 C) Cures in the air in about 7 days. Catalyzing with 1600 Hardener can reduce through-dry time to 3 days at 77 F (25 C). OVERCOATING TIME Minimum 15 minutes Maximum De-gloss and recoat. No special preparation is necessary. PHYSICAL SPECIFICATIONS Pigments Chemical resistant Shipping Weight (approximate due to color, fill level, pigment) Gallon lbs 5 Gallons lbs Solids Average of 30% by volume, depending on color Average of 45% by weight, depending on color Pot Life (at 77 F) 1 ½ hours at 77 F (21 C) when catalyzed Mixing Ratio Not applicable unless catalyzing with 1600 hardener, then 8 parts 1600 to 1 part hardener to 2 parts water. Shelf Life 6 to 8 months Gloss High Gloss 3663 Nor th Clovis Avenue Fresno, Cali fornia /323-PAINT 559/ fax
3 TECHNICAL BULLETIN AREA OF USAGE Recommended for the refinish market, trailer, fleet, and OEM. Excellent product for industrial coating of machinery and equipment. Provides a flexible tough finish with easy clean up. CHEMICAL RESISTANCE Water Salt Petroleum Oil Solvents NOTE: Although 1600 SERIES exhibits resistance to the above environments, this list is not meant to imply an express guarantee in actual service. It is recommended that the user contact Ponderosa Paint Company for specific recommendations when severe exposure is expected. THINNING Water is recommended. Spray Application Do not over thin! For airless equipment no reduction is necessary. For pressure pot conventional or electrostatic guns, reduce 10% (12 oz. per gal.). Use 5-10 lbs. pot pressure for adequate paint flow rate and adjust atomizing air to get proper fan width and particle size. If you don t get a good fan pattern, add more water, a little at a time. Viscosity drops very fast and over-reduction will cause sagging. For HVLP a little more reduction may be necessary, perhaps as much as 10% (3 oz. per qt.). Brush or Roller Application Not recommended SURFACE PREPARATION Steel Clean the surface thoroughly to remove oil, grease, wax, dirt, etc. Acid-etch prime galvanized parts. Prime aluminum with an acid etch primer. Bare steel should be primed (waterborne primers are recommended). Body filler may be used, but care must be taken to ensure that it is properly catalyzed. Under-cured body filler may cause primer to lift. For best results use polyester filler. Surfaces previously painted with synthetic enamels or water reducible enamels may be recoated without sanding, although scuff sanding is recommended. Re-painting over catalyzed paints, like urethanes and epoxies, scuff sanding is necessary for good adhesion. Be sure to remove sanding dust with a tack rag. If you are in doubt about what the old finish might be, sand it prior to repainting. EQUIPMENT Spray Application 1. All spray equipment should be thoroughly cleaned and the hose, in particular, should be free of old paint film and other contaminants. 2. Air Pressure: HVLP Conventional Air-Assisted Airless 8-10 psi at the air cap psi at the gun 60 psi at the gun Gun Setup: mm or equivalent 3. When air-assisted airless spray equipment is used, the recommended liquid pressure is 1800 to 3000 psi with a tip size from.009 to.017. Roller Application Mohair or ¼ short nap roller (for field repair). Brush Application China Bristle brush (for field repair). READ THIS NOTICE SAFETY AND MISCELLANEOUS EQUIPMENT 1. It is recommended that the operator provide himself with clean coveralls and rubber soled shoes and observes good personal hygiene. Certain personnel may be sensitive to various types of resins, which may cause dermatitis. 2. Keep away from heat, sparks and open flame, and use necessary safety equipment (such as air mask, explosion-proof electrical equipment, nonsparking tools and ladders, etc.) Avoid contact with skin and avoid breathing of vapor or spray Page Series
4 TECHNICAL BULLETIN mist. When working in tanks, rooms and other enclosed spaces, adequate ventilation must be provided. Keep out of the reach of children. 3. CAUTION: Read and follow all caution statements on this product technical bulletin, material safety data sheet and container label for this product. MIXING If catalyzing use 1600 Hardener at a ratio of 8 parts 1600 to 1 part hardener and thin with 2 parts water. If using either 1600 Accelerator* or 1600 Retarder* add up to 5%. NOTE: Always thin after adding hardener or additives. * The addition of accelerator or retarder may result in a non-compliant ready to spray VOC. Verify with local regulations prior to use. APPLICATION PROCEDURE 1. Surface should be dry and clean. Free of dirt, grease, old loose scaling paint and anything that might interfere with adhesion. Prime bare metal. The surface preparation method selected will depend on the required degree of cleanliness defined by SSPC specifications. 4. Always work wet. The first coat should be a thin wet coat. The fog coat or tack coat usually used with high solvent containing paints is not recommended. Water-reducible enamel will not re-dissolve the dried paint droplets of a fog coat. After the first thin coat has set up a bit, apply your final coat. 5. Recommended for application up to 2.0 mils dry film thickness per coat. Heavy applications exceeding this thickness may result in slow dry. 6. For re-paint work with areas of bare metal or primer here and there, it is best to shoot a quick wet pass on each of those areas, allow 15 minutes tack time, and then apply a full wet coat overall. 7. Equipment should be thoroughly cleaned with tap water. Rinse the pot or cup and flush the gun, spraying into your booth filters. Follow with clean water, spraying until no more color shows. Before you store the gun, you may want to flush out the water with a little acetone. INSPECTION Degree of surface preparation and film thickness shall conform to appropriate specifications outlined in SURFACE PREPARATION and RECOMMENDED FILM THICKNESS sections. 2. Water-reducible primers dry fast and may be top coated as soon as all water is out of the film, usually in less than one hour. If in doubt, feel the surface with the back of your hand. If it feels cold, water is still evaporating. When it returns to normal temperature, primer is ready to be top coated. 3. With water-reducible enamels, you will be shooting unreduced or very slightly reduced paint, so it will take fewer passes to get coverage (at the same rate of fluid flow than most solvent paints). Instead of a tack coat and two wet coats, you will use just two wet coats for any job. Ponderosa Paint Company warrants its products to be free of defects in materials and workmanship. Since Ponderosa Paint Company has no control over surface preparation or application methods, no guarantee concerning results is offered, expressed, or implied. If this product is found to be defective, liability shall be limited to the refund of purchase price or replacement of product. Page Series
5
6
PRODUCT GUIDE: COMPLIANT TOPCOATS. Version:
PRODUCT GUIDE: COMPLIANT TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: 3.5 V.O.C FASTDRY, Black Product Number: 4899 DESCRIPTION: This product is a high gloss enamel for OEM finishing
More informationBig Sky Product Information Sheet. Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide)
Big Sky Product Information Sheet TECHNICAL SUPPORT ((800) 328-4892 P.I. Sheet #3008 Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide) READ ENTIRE PRODUCT
More informationRAPTOR EPOXY PRIMER RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER DESCRIPTION
Suitable as a primer or as a primer filler for industrial refinish applications, the primer also provides excellent anti-rust protection. Easy to apply Excellent anti-corrosion resistance Can be applied
More informationTECHNICAL DATA SHEET IVY COATINGS:
direct to metal Interior/Exterior DESCRIPTION Ivy Direct To Metal Paint is a low-voc interior/exterior; waterborne; rust-inhibiting metal paint that does not compromise indoor air quality. Ivy Direct To
More informationProduct Information. ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer. Product Description. Preparation of Substrate
Product Information ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Product Description A-Chromatic s ECP11 White, ECP15 Gray, and ECP17 Black are premium quality, low VOC primer surfacers specifically
More informationProduct Information. 2K Chromatic Sealer NR (National Rule) D8081 White D8088 Red D8085 Gray D8089 Yellow D8087 Black D8090 Blue. Product Description
Product Information 2K Chromatic Sealer NR (National Rule) D8081 White D8088 Red D8085 Gray D8089 Yellow D8087 Black D8090 Blue Product Description The 2K Chromatic Sealer NR (D80xx) is a premium quality
More informationPRODUCT GUIDE: WATERBORNE TOPCOATS. Version:
PRODUCT GUIDE: WATERBORNE TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: CONTAINER GUARD QD BLACK PRODUCT: 4886-02 DESCRIPTION: CONTAINER GUARD QUICK DRY (QD) is an air-drying, water reducible
More informationVolume Solids % Weight Solids %
Product Name Full Product Name Type of Product Description HS 2K Primer (High Build) 2K high build acrylic urethane primer surfacer Concept HS 2K Primer (High Build) is a high solid 2K acrylic urethane
More informationPRODUCT GUIDE: CATALYZED TOPCOATS. Version:
PRODUCT GUIDE: CATALYZED TOPCOATS Version: 08.07.17 ELITE COATINGS PRODUCT DATA PRODUCT: Low VOC High Solids Aliphatic Urethane Product Number: 4045 DESCRIPTION: 4045 is a top of the line 2 component urethane
More informationProduct Data Sheet Brite Red Aluminum
Product Data Sheet Rust Proof Any-way spray paint voc/carb mir: flat
More informationProduct Information. ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer
Product Information ECP11 White, ECP15 Gray, ECP17 Black A-Chromatic Surfacer Product Description A-Chromatic Surfacers ECP11 White, ECP15 Gray, ECP17 Black are premium quality low VOC primer surfacers,
More informationPrimer Surfacer EP II
Description Surfacer EP II is a gray, 4.6 lbs/gal, chromate-free epoxy primer that can be applied as a sprayable sanding surfacer, rollable sanding surfacer or primer sealer. This product provides good
More informationFull Product Name. Products. Properties. 2K Etch Primer. Type of Product Description
Product Name Full Product Name Type of Product Description 2K acid etch primer Concept is an acid containing etch and primer in one product. This Product is characterized by excellent adhesion and corrosion
More informationD895 EU-113. Colour Blender. Preparation of Substrate: Required Products. Product Description:
Product Description: GLOBAL REFINISH SYSTEM is a multipurpose product used with Global Refinish System BC colour. Mixed ready-to-spray with BC Colour, it is used as a blending clear along the colour blend
More informationPrimer Pro FOR PROFESSIONAL USE ONLY. Description. As A Primer Surfacer. Mixing 4 1 1
08/09/206 Description is a high solids urethane surfacer and sealer. Depending on the mixing ratio utilized, can be either used as a high build surfacer or wet-on-wet primer sealer. is available in white,
More informationPRODUCT GUIDE: CATALYZED PRIMERS. Version:
PRODUCT GUIDE: CATALYZED PRIMERS Version: 08.07.17 305 Zinc Rich Epoxy Polyamide Primer Description: 305 is a user friendly zinc-rich epoxy primer formulated for use as a primer under acrylic, epoxy, and
More informationDULUX UNIVERSAL UNDERCOAT
TECHNICAL DATA SHEET Version 1 2015 JUNE THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Intermediate coating for use under decorative topcoats, for interior and exterior use PRODUCT
More informationE380 and E381 Epoxy Primer
Description E380 is a high solids 3.5 VOC epoxy primer/sealer, which provides excellent filling over sand blasted metals. E380 dries fast while still maintaining good hold out and a smooth finish. E380
More informationProduct Data Sheet RUST PROOF ANY-WAY SPRAY PAINT. No /14. Aervoe Industries, Inc.
Product Data Sheet RUST PROOF ANY-WAY SPRAY PAINT VOC/CARB MIR: FLAT
More informationNoFire A-18 NV Fire Protective Coating - General Application Procedure & Technical Data
21 Industrial Ave Upper Saddle River New Jersey 07458 Tel: 201-818-1616 Fax: 201-818-8775 E-mail: nofire@nofire.net Web Site: http://www.nofiretechnologies.com NoFire A-18 NV Fire Protective Coating -
More informationAerodur 3001 Base Coat Special Effects
Technical Data Sheet Product Group Polyurethane Topcoats Characteristics Product Information Aerodur 3001 topcoat is part of the high solid 3 components polyurethane Aerodur 3001 Solid Colors Aerodur 3001
More informationUse suitable respiratory protection Akzo Nobel Sign Refinishes recommends the use of a fresh air supply respirator.
Description A two-component high solids, low VOC, HAPs free epoxy primer. Grip-Gard Epoxy Sealers White and Gray are fast drying primers with excellent corrosion protection over multiple substrates. The
More informationK 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91)
K 200/ Acrylic Urethane Primer Surfacer Form P-151 (9/91) K 200 IDENTITY CODE Primer Surfacer K 200 Primer Surfacer Hardener K 201 Flexible Primer Surfacer Hardener K 248 DT Reducers Cool Temperature Reducer
More informationGray Urethane Surfacer (Low VOC)
Description Lesonal is intended for use as a high build surfacer that offers excellent filling, easy sanding, and fast dry times. Depending upon the mixing ratio used, Lesonal can also be used as a wet-on-wet
More informationLow V.O.C. 2-Component Polyurethane Game Line Paint System
PBWWinc. 1 Technical Data Sheet GEN-U-LINE 4000 Series Low V.O.C. 2-Component Polyurethane Game Line Paint System Product Description: GEN-U-LINE 2-component polyurethane line paints are high gloss, flexible,
More informationP Waterborne Primer-Surfacer-Grey
PDS N4.15C January 2014 P950-5505 Waterborne Primer-Surfacer-Grey PRODUCT DESCRIPTION P950-5505 Waterborne Primer-Surfacer is a grey primer-surfacer based on the latest 1K waterborne technology for spot
More informationSpecification Guide. Portable & Modular Buildings
Specification Guide Portable & Modular Buildings Table of Contents Page Introduction Identifying painting requirements 3 How do I use this specification guide 3 Contacting my local Axalta Coating Systems
More information10P20-44MNF High Solids Epoxy Primer
Technical Data Sheet Product Group High solids epoxy primer Characteristics Product Information A high solids urethane compatible, Skydrol resistant primer for application to aircraft exterior surfaces.
More informationAPPLICATION NOTE - SR001. Cold Weather Application
APPLICATION NOTE - SR001 Cold Weather Application Silent Running is best applied with the ambient, material and substrate temperature in the range of 65-85 degrees F. Lower temperatures will result in
More informationBulldog Adhesion Promoter System
PABC124 Abrasive Cleaner GTPO123, QTPO123 Adhesion Promoter (liquid) ETPO123B Adhesion Promoter (aerosol) Bulldog Adhesion Promoter is the premier adhesion promoter for the auto body collision repair market.
More informationPrimer / Primer Surfacer
Description is gray in color offering good filling and sanding properties, excellent holdout, fast dry, and good adhesion on properly prepaired substrates. can be used as either a high build primer / primer
More informationTECHNICAL DATA SHEET 9008B0900D. Desothane HD 9008B0900D Buffable Clear Coat. Product Description. Components. Specifications
TECHNICAL DATA SHEET Product Description Desothane HD is a buffable clear coat intended to be used over Desothane HD 9008 Basecoat. can also be used as a buffable clear coat over pigmented polyurethane
More informationAutomotive Refinish Terminology
Automotive Refinish Terminology Accelerator: A substance that when added to a paint will speed up the rate of cure. Acetone: A very fast evaporating solvent with high solvency for certain types of compounds
More informationEpoxy Coal Tar. Protects Steel and Concrete in Marine and Industrial Environments.
Epoxy Coal Tar Protects Steel and Concrete in Marine and Industrial Environments. General Epoxy Coal Tar is a protective coating designed to resist chemical attack and rigorous weather conditions by combining
More informationDPS3051 White / DPS3055 Gray / DPS3057 Dark Gray
V PRIME Acrylic Urethane Surfacer P 238 DPS3051 White / DPS3055 Gray / DPS3057 Dark Gray V PRIME DPS305x are premium quality primer surfacers available in white, gray and dark gray. The surfacers are suitable
More information2K weather resistance clear coat A850
Clear coat Donglai Coating Technology (Shanghai) Co., Ltd. 2K weather resistance clear coat A850 Description High-build, two-component clear coat designed for universal application and optimal appearance
More informationSEA45 Water Borne Acrylic Gloss
Water Borne Acrylic Gloss TECHNICAL DATA SHEET Product Description Components is a single pack, general purpose gloss finish. Applicable by brush or spray. Fast drying Water based, low VOC Excellent weather
More informationnax Urethane Primer Surfacer Zitan
Description Quick-drying two-pack wet on wet primer surfacer and sanding primer filler with excellent application and sanding properties. Helps to reduce process time due to its wide application window
More informationAPPLICATION NOTE - SR001. Cold Weather Application
APPLICATION NOTE - SR001 Cold Weather Application Silent Running is best applied with the ambient, material and substrate temperature in the range of 65-85 degrees F. Lower temperatures will result in
More informationPBWWinc. GEN-U-LINE 4000 Series Application Guide. Technical Data Sheet. General Guidelines:
PBWWinc. 1 GEN-U-LINE 4000 Series Application Guide Technical Data Sheet General Guidelines: 1) Close the facility to all traffic before starting any work on the game lines. Close all doors and windows
More informationGeneral description: Two-component high-build, high solids surface tolerant universal epoxy coating. For painting on steel and galvanized steel substrates. Certified for systems category C5I High ISO 12944.
More informationUnit PO0205K Knowledge of Applying Fillers and Foundation Materials
Assessment Requirements Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Content: The types of substrates likely to be found in vehicle refinishing a. List types of substrate to include:
More informationDESCRIPTION/APPLICATION HK RESEARCH GEL COATS DESCRIPTION
Product Data 908 LENOIR ROAD POST OFFICE BOX 1809 HICKORY, NORTH CAROLINA 28603-1809 TELEPHONE (828) 328-1721 TOLL FREE (800) 334-5975 FAX (828) 328-4572 DESCRIPTION/APPLICATION HK RESEARCH GEL COATS DESCRIPTION
More informationDPLV Low VOC Epoxy Primer P-245
Low VOC Epoxy Primer P-245 Low VOC Epoxy Primer provides excellent adhesion and corrosion resistance to many types of properly prepared steel, aluminum, and fiberglass substrates. Epoxy Primer may also
More informationPRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required
TECHNICAL DATA SHEET Version 1 2016 JULY THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required
More informationDPS3051 White / DPS3055 Gray / DPS3057 Dark Gray
V-PRIME DPS3051 White / DPS3055 Gray / DPS3057 Dark Gray V-PRIME DPS305x are premium quality primer surfacers available in white, gray and dark gray. The surfacers are suitable for the wide range of day-to-day
More informationExterior Paint for wood Tables and Benches
Page 1 of 5 DESIGN STANDARDS FOR: EXTERIOR PAINTING Exterior Paint for wood Tables and Benches 1. Wood tables and benches, including trash receptacle slats, shall be painted with one coat of primer and
More informationUNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS
UNIT REF: PO0205K UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS Level: 2 Route: Knowledge Credit Value: 6 GLH: 45 Mapping: This unit is mapped to the IMI NOS PO2 and PO5 Rationale:
More information8-746 High Production Non-Sanding Primer Grey GS907
8-746 Grey GS907 GENERAL INFORMATION 8-746 Grey GS907 is a multi use polyurethane High Solid (wet on wet) primer. This primer can be used as a general non sanding primer or for properly cleaned ridged
More informationSemimatte Volume Solids 55 ± 2% (ISO ) VOC. Overcoating Data 10ºC 25ºC 35ºC Min. 4 hours 2 hours 1 hour Max. 7 2 hours 48 hours 36 hours
W-POXI HIDRO ERP 303 PRODUCT DESCRIPTION: INTENDED USES: Hydrosoluble bicomponent polyamine epoxy primer, with anticorrosive pigmentation and extra quick drying. Items which comply with Directive Rohs
More informationGloss Volume Solids 88 ± 2% (ISO ) VOC. Overcoating Data 10ºC 25ºC 35ºC Min. 24 hours 12 hours 8 hours Max. 72 hours 24 hours 24 hours
W-POXI DFA 301 PRODUCT DESCRIPTION: INTENDED USES: Bicomponent polyamine epoxy paint, of high thickness, being part of the class of Low VOC, being able to be applied in internal environments, closed or
More informationAutobase Plus FOR PROFESSIONAL USE ONLY. Description. Basecoat 09/16/2015
Description Autobase Plus solvent borne basecoat provides excellent coverage, metallic control and sprayability when used to duplicate OEM solid, metallic and pearl color effects. Autobase Plus must be
More informationTECHNICAL DATA SHEET 515X349. DeSoto 515X349 Exterior Primer. Product Description. Components. Specifications
TECHNICAL DATA SHEET Product Description DeSoto exterior primer is a conventional solids urethane compatible epoxy coating. This primer was formulated to protect aluminum and composite substrates from
More informationWEGPOXI WET SURFACE 89 PW ALUMINUM
WEGPOXI WET SURFACE 89 PW ALUMINUM PRODUCT DESCRIPTION INTENDED USES Bicomponent epoxy polyamine primer, of high solids, high thickness and with anticorrosive pigmentation with an aluminum base, providing
More informationnax K Premium Primer
Description Premium quality, high build multi grey shade fast drying, 2K sanding primer filler with excellent application and sanding properties. Due to its fast ambient drying, it helps to reduce process
More informationAutowave 3 Stage Application and Repair
Description The term spot repair refers to all repairs in which the repaired area has color blended invisibly into the existing finish. As a result, the car refinisher is not compelled to spray large panels
More informationPBWWinc. Technical Data Sheet. GERLINE Gameline Paint Instructions for Sport Flooring. General Guidelines:
PBWWinc. 1 Technical Data Sheet GERLINE Gameline Paint Instructions for Sport Flooring General Guidelines: 1) Close the facility to all traffic before starting any work on the game lines. Close all doors
More informationDuPont ChromaSurfacer 7704S 2K Urethane Primer- Filler
c Description DuPont ChromaSurfacer 7704S is a high build 2K Urethane Primer- with a simple 4:1 mix ratio. The primer has excellent hold out and shares activator with DuPont ChromaSeal 7710S /7740S /7770S,
More informationApplication and Repair of Autobase Plus Red Tri-Stage Colors
Description Sikkens Autobase Plus Ready Mix (RM) Groundcoat and Midcoat are a unique color package that requires a specialized blend of pigments and toners designed to provide a color match for FA12:RR.
More informationWEGTHANE HPA 501 (HPA 501/ HPA 502/ HPA 503/ HPA 504)
WEGTHANE HPA 501 (HPA 501/ HPA 502/ HPA 503/ HPA 504) PRODUCT DESCRIPTION: INTENDED USES: Bicomponent gloss aliphatic acrylic polyurethane finishing paint, with excellent durability and extended repainting.
More informationINDUSTRIAL & OEM PRIMER AND TOPCOAT PRODUCT INFORMATION
INDUSTRIAL & OEM PRIMER AND TOPCOAT PRODUCT INFORMATION Harrison Paint Company 1329 Harrison Avenue SW Canton, Ohio 44706 U.S.A. (800) 321-0680 Fax (330) 454-1750 PRIMERS 961 LINE SHOPCOAT PRIMER GRAY,
More informationnax Pro LV3601/03/05 VHS Primer Surfacer
Description VOC compliant, quick-drying multi grey shade, two-pack wet on wet and sanding primer surfacer, with excellent application and sanding properties. Helps to reduce process time and provides good
More informationNOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY).
Product Description PHOENIX PAINTS MAXICOAT 100 is a 2 Pack Water-Dispersed Top Coat which not only exhibits the physical and chemical strengths of epoxy, but also the safety and convenience of water as
More informationJONES-BLAIR tm MANUFACTURERS OF QUALITY PAINT SINCE 1928 TYPE OF COATING. Product: Acrylithane HS2 Acrylic Urethane, Primers, Reducers
JONES-BLAIR tm MANUFACTURERS OF QUALITY PAINT SINCE 1928 TYPE OF COATING Product: Acrylithane HS2 Acrylic Urethane, Primers, Reducers FIELD APPLICATION GUIDE & POWERWASHING SPECIFICATIONS FOR APPLYING
More informationDesobond CA102 Adhesive Bonding Primer
TECHNICAL DATA SHEET Product Description Components Desobond is a low density adhesion promoter. It was developed to improve bonding characteristics to aged primers, topcoats, acrylics, aluminum, and other
More informationHP Epoxy Primer P
Product Data Sheet September 2006 (updated November 2016) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Epoxy Primer P580-3005 Product Description P580-3005 HP Epoxy Primer P275-3022 Hardener for Epoxy
More informationSELECTION AND PREPARATION OF SUBSTRATES
592 TECHNICAL DATASHEET 7-538 / 7-539 SELEMIX DIRECT GLOSS TOPCOATS PRODUCT DESCRIPTION Selemix Direct Gloss are polyurethane coatings based on PU 2K technology, which can be applied direct onto substrates
More informationSUNBELT transformer WIDTFA3501 PAINTING TRANSFORMERS WITH WATERBORNE PAINT SYSTEMS INTERNAL USE ONLY DOCUMENT HISTORY
SUNBELT transformer WIDTFA3501 PAINTING TRANSFORMERS WITH WATERBORNE PAINT SYSTEMS INTERNAL USE ONLY DOCUMENT HISTORY REV. DATE DESCRIPTION OF CHANGE AND REASON FOR CHANGE A JUNE 10, 1999 NEW ISSUE B JULY
More informationF565 Intermediate Coatings (EMEA)
TECHNICAL DATA SHEET Product Description Components is a two pack, pigmented, polyamide based coating formulated for use as intermediate coats in selectively strippable finish paint systems. High resistance
More informationHP Chromate Free Epoxy Primer P /-4505/-4510
Product Data Sheet September 2011 (February 2013 update) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Chromate Free Epoxy Primers P580-4501/-4505/-4510 Product Description P580-4501 HP Chromate Free
More informationCV116 Polyurethane Coat Gloss
Polyurethane Coat Gloss TECHNICAL DATA SHEET Product Description Components is a two pack, ambient curing clear polyurethane gloss coating, designed for internal / external use to protect identification
More informationmm bar at the air inlet minutes at 20 C 5-10 minutes at 20 C. 8 hours at 20 C 45 minutes at 60 C 3 coat application
Description Two-pack, VOC compliant, chromate-free epoxy primer-surfacer with good adhesion and corrosion resistance properties on all substrates within the Car Refinish market. For both new panels and
More informationSECTION 025 INDUSTRIAL PAINTING
SECTION 025 INDUSTRIL PINTING Industrial painting, including all necessary preparation and application, except as modified in this Section, shall conform to the recommendations of the manufacturer of the
More informationKnowledge Requirements. Protective Coatings Applicator Abrasive Blast Cleaning Operator Spray Painting Operator. trainthepainter.
Knowledge Requirements Protective Coatings Applicator Abrasive Blast Cleaning Operator Spray Painting Operator trainthepainter.com Knowledge Requirements The Knowledge Requirements the protective coatings
More informationProduct Data Sheet August 2006 (Updated in December 2014)
Product Data Sheet August 2006 (Updated in December 2014) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY Fastbuild TM Product Description P540-400 Fastbuild - green P540-401 - off white P540-402 - grey
More informationPhysical constants Finish: ASTM D Flash point: Rangan Far, s Adding thinner to a paint may change the flash point of the diluted material.
Finish: The appearance of the paint film after drying under optimum conditions,- given as high gloss (>90), gloss (60-90), semi-gloss (30-60), semi-flat (15-30), or flat (
More informationData Sheet 5741 Englisch
Data Sheet 5741 Englisch 2K-PUR-Acryl Silk Gloss 2K-PUR-Acryl Seidenglanzlack 5741 two-component, high mechanical resistance, for exterior and interior use, with 2K-PUR-Acryl Hardener 5770 2K-PUR-Acryl
More informationPermasolid HS Vario Surfacer 8590
Permasolid HS Vario Surfacer 8590 GENERAL DESCRIPTION A high quality acrylic surfacer from our 2K-Acryl-System for partial and full passenger car refinishes. Its versatility enables application at both
More informationSpecification Guide. Conveyors
Specification Guide Conveyors Table of Contents Page Introduction Identifying painting requirements 3 How do I use this Specification Guide 3 Contacting my local Axalta Representative 3 Paint Selection
More informationPaint Problems and Solutions Guide. Endura Manufacturing Co. Ltd th Street Edmonton, Alberta T5L 2J
Paint Problems and Solutions Guide Endura Manufacturing Co. Ltd. 12425 149th Street Edmonton, Alberta T5L 2J6 1-800-661-9930 www.endura.ca Table of Contents Paint problems are easy to spot, but in many
More informationSuper Shield TM Water Based Silver Coated Copper Conductive Coating
Description The 843WB Super Shield TM is a one-part urethane system pigmented with highly conductive silver coated copper flake. It is easy to use, with no let-down, and no heat cure necessary. It can
More informationMetal 3in1. Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces
Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces It prevents humidity from penetrating, providing long-lasting rust protection Highly resistant to ultraviolet radiation,
More informationMarch 2009 Product Information RAPID GREYMATIC 2K Filler
GLOBAL REFINISH SYSTEM March 2009 Product Information RAPID GREYMATIC 2K Filler PRODUCT DESCRIPTION 2K RAPID GreyMatic is a range of 2K primer surfacers suitable for a wide range of repair work. Versatile,
More informationProduct: Acrylithane HS2 Acrylic Urethane (not for use in California) JONES-BLAIR PAINT FIELD APPLICATION GUIDE
Product: Acrylithane HS2 Acrylic Urethane (not for use in California) JONES-BLAIR PAINT FIELD APPLICATION GUIDE Sheetz Service Station Fueling Areas, Canopy Deck, and Power Washing Instructions Revised
More informationSuper Shield TM Water Based Silver Conductive Coating 842WB Technical Data Sheet 842WB-Liquid
Description Super Shield TM The 842WB Super Shield TM is a one-part urethane system pigmented with highly conductive silver flake. It is easy to use, with no let-down, and no heat cure necessary. It can
More informationTechnical Data Sheet Primers/Surfacers LV 250 Primer EP /005 FOR PROFESSIONAL USE ONLY
100 2505-001/005 50 2505-104 40 2505-204 2505-205 12 Description: Autocoat BT LV 250 Primer EP is a quick drying, chromate-free high solid two-pack epoxy primer-surfacer for shot blasted steel substrates..
More informationProduct Information PRIMA D839 2 Component Primer
GLOBAL REFINISH SYSTEM March 2011 Product Information PRIMA 2 Component Primer PRODUCT DESCRIPTION Prima is a grey 2K primer surfacer, suitable for a wide range of day-to-day repair work. Versatile, quick
More informationDuPont Plas-Stick 2332S Low VOC Adhesion Promoter
Description Plas-Stick 2332S is a Low VOC gray pigmented adhesion promoter for polyolefin or non-polyolefin unprimed automotive plastics. When combined with proper surface preparation, this product enhances
More informationMATERIAL AND EQUIPMENT STANDARD FOR VINYL PAINT (ALUMINUM) AS INTERMEDIATE AND TOP COAT (FINISH) ORIGINAL EDITION MAY 1993
MATERIAL AND EQUIPMENT STANDARD FOR VINYL PAINT (ALUMINUM) AS INTERMEDIATE AND TOP COAT (FINISH) ORIGINAL EDITION MAY 1993 This standard specification is reviewed and updated by the relevant technical
More informationA Guide to the Application and Use of Organic and Inorganic Paints and Surface Coatings
A Guide to the Application and Use of Organic and Inorganic Paints and Surface Coatings Our recommended methods of appying both our organic and inorganic surface coatings. This guide will help to use our
More information2014 Sign Traini GRIP-GARD BC SYSTEM GRIP-GARD BC FLEX
2014 Sign Traini GRIP-GARD BC SYSTEM GRIP-GARD BC FLEX PICTOGRAM DESCRIPTION Degrease Machine sand dry Hand sand wet Hand sand dry Scotch Brite Use Akzo Measuring Stick Ready to Spray Mixing Ratio: 2
More informationCleaning Procedure INTRODUCTION:
Cleaning Procedure INTRODUCTION: Many elements can contaminate the surface of a vehicle s paint film, such as waxes, grease, polishes, road film, tar and general dirt. Pre-cleaning to remove any existing
More informationWATER-BORNE SOL-GEL BASED BINDERS FOR THE FORMULATION OF AMBIENT CURING ZINC DUST PAINTS
WATER-BORNE SOL-GEL BASED BINDERS FOR THE FORMULATION OF AMBIENT CURING ZINC DUST PAINTS Björn Borup, Philipp Albert, Helmut Mack Evonik Industries, Germany Introduction Regulatory pressure and increasing
More information1. Labels: Do not paint over UL, FMG, or other code-required labels or equipment name, identification, performance rating, or nomenclature plates.
SECTION 09 9100 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationThese Application Instructions cover surface preparation, application equipment and application details for HEMPADUR MASTIC 45880/45881.
For product description refer to product data sheet HEMPADUR MASTIC 45880/ HEMPADUR MASTIC 45880/ High temperatures: 45881: BASE 45889 with CURING AGENT 95881 Low to medium temperatures: 45880: BASE 45889
More informationPermasolid HS Premium Surfacer 5310
Permasolid HS Premium Surfacer 5310 GENERAL DESCRIPTION A high quality, high solids 2K acrylic surfacer for passenger car refinishing that provides very high film build with good vertical stability, efficient
More informationJanuary 2007 Product Information DELTRON D821
GLOBAL REFINISH SYSTEM January 2007 Product Information DELTRON High Solids Chip Resistant Primer PRODUCT DESCRIPTION is a transparent-grey primer surfacer with excellent anti-chip and anti-corrosion properties.
More informationVolume Solids %
Product Name Full Product Name Type of Product Description 2K acrylic urethane solid topcoat Concept is a 2 K Solid tinting system. It incorporates a large range of colour formulations, with high opacity
More informationSECTION PAINTS AND COATINGS
SECTION 09 90 00 PAINTS AND COATINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Surface preparation. B. Field application of paints and other coatings. 1.2 RELATED SECTIONS A. Division 05 - Metal Fabrications.
More informationSketchpaint. Ideal for turning any smooth surface into a whiteboard. Ready to use in 5 days
Sketchpaint Ideal for turning any smooth surface into a whiteboard SketchPaint - A whiteboard straight out of a tin! White Gloss or Transparent Finish Simple application Tin size available: 3m² or 6m²
More information