Modeling 2. Draw Storefront Curtain Wall. Align. Draw Storefront Curtain Wall
|
|
- Kerry Dixon
- 5 years ago
- Views:
Transcription
1 STEP 1: Back to your Revit fi le _ from the Project Browser double-click on Level 1 _ type shortcut WA (wall) _ set the type of wall to Storefront _ draw a curtain wall on the South Wall as shown in image 1 _ (note: type shortcut TL to set the viewport to display all thin lines) STEP 2: draw another curtain wall on the South Wall as shown in image 2 _ align the outside edge of the curtain wall with the outside edge of the column Draw Storefront 3 STEP 3: go to the 3D View _ change the curtain wall grids = 4 vertical _ 1 horizontal STEP 4: from the Ribbon under Insert click on Load Family _ from the Doors folder select Store Front Dbl _ click Open 1 Align save the Revit fi le in your Class-04 folder as: your initials-class-04.rvt Draw Storefront 2 4 1
2 Draw Mirror Axis STEP 5: select the curtain panel as shown in image 5 _ click on the pin to Un-Pin the element STEP 6: from the Properties panel _ change the element type to: Store Front Double Door STEP 7: go to Level 1 _ select the 2 south curtain walls _ using the midpoint of the building mirror them to the north side STEP 8: go to the 3D View _ orbit around to the north side _ select the left side curtain wall _ from the ribbon click on the Edit Profile button _ draw two new lines as shown in image 8 5 Select Curtain Panel 7 Draw two lines 6 8 2
3 STEP 9: stretch the vertical & horizontal existing lines back to form a closed shape as shown in image 9 _ click on the green check mark from the ribbon to fi nish STEP 10: repeat step 9 for the right side north STEP 11: go to Level 1 _ type shortcut WA (wall) _ change the wall type to a Generic 6 _ change the Unconnected Height = 12 _ change the location Line = Finish Face: Exterior STEP 12: draw two walls to complete the north elevation 9 11 Draw two walls
4 Draw South Clearstory STEP 13: go to the 3D View _ verify the north walls are drawn correctly STEP 14: orbit around to the south side _ next we need to draw the 3 Clearstory Walls STEP 15: go to T/Ext Wall _ draw the south clearstory curtain wall with an Unconnected Height = 10 as shown in image 15 north walls STEP 16: go to the 3D View _ select the new curtain wall _ set the Base Offset = 1-0 _ set the Unconnected Height = 9-0 _ set the Vertical Grid Pattern = 8 _ set the Horizontal Grid count = 1 3 clearstory walls
5 STEP 17: go to T/Ext Wall _ draw the west clearstory curtain wall with an Unconnected Height = 10 as shown in image 17 Draw West Storefront STEP 18: go to the 3D View _ select the new curtain wall _ from the ribbon click on the Edit Profile button STEP 19: change the profi le shape to a triangle to match the sloped roof line as shown in image 19 _ if prompted click Remove Constraints STEP 20: click Delete Elements from the error window _ click on the green check mark from the ribbon to fi nish _ set the Vertical Grid Pattern = 4 _ set the Horizontal Grid count = 1 _ Mirror the curtain wall over to the east elevation to complete the building model
6 Draw interior office walls STEP 21: go to the 3D View _ completed building model should look as shown in image 21 STEP 22: go to Level 1 _ type shortcut WA (wall) _ change the wall type to a Generic 5 _ change the height = Unconnected Height = 10 _ change the location Line = Wall Centerline STEP 23: trace the interior offi ce walls as shown in image 23 STEP 24: type shortcut DR (door) _ use the default door type Single-Flush 36 x completed building model 23 Place door
7 STEP 25: draw the remaining interior walls and doors as shown in image 25 STEP 26: save the Revit fi le _ in 3DS Max update the Revit link STEP 27: group objects together as needed STEP 28: render Camera001 _ save the fi le in your class-04 folder as: your initials-class jpeg Save the 3DS MAX fi le in your Class-04 folder as: your initials_class-04.max
Ribbon (Panels) + Options Bar + Contextual Tabs (tools based on selection)
Week 11 Revit, Basics Building Information Modeling (BIM) - Parametric 3D Model File Types: Projects RVT (template = RTE) Families - RFA (template = RFT), "Symbols" Layout Workspace - Elevation Markers
More informationAutodesk Medical Center
Autodesk Medical Center Page 1 Contents Autodesk Medical Center... 1 Revit Projects... 3 Exercise 1 Create a new project file... 3 Datum Elements... 4 Exercise 2 Add Grids... 5 Exercise 3 Edit Levels...
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationRevit Structure 2013 Basics
Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial
More informationRevit Structure 2014 Basics
Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationLesson 17. The Focus of this lesson is:
The Focus of this lesson is: Inserting beams between frames to support Roof Top Units or concentrated loads Loading the roof beams so they design Locating a roof framed opening Lesson Comments: This lesson
More informationGetting Started with Revit
AUTODESK Autodesk REVIT Revit TRAINING Training TUTORIAL Tutorial Getting Started with Revit FOCUS Focus KUWAIT Kuwait CAD Cad Team 2012-13 Step 01 02 Grid & levels Grid create 5 vertical grid lines grid
More informationArchitecture 2012 Fundamentals
Autodesk Revit Architecture 2012 Fundamentals Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial files on enclosed CD Visit
More informationSMALL OFFICE TUTORIAL
SMALL OFFICE TUTORIAL in this lesson you will get a down and dirty overview of the functionality of Revit Architecture. The very basics of creating walls, doors, windows, roofs, annotations and dimensioning.
More informationAutodesk Revit Building. Getting Started with
Autodesk Revit Building Getting Started with Autodesk Revit Building April 2006 Copyright 2006 Autodesk, Inc. All Rights Reserved This publication, or parts thereof, may not be reproduced in any form,
More informationChief Architect New Feature List
SYSTEM / PERFORMANCE Chief Architect Premier X4 is available in 64 bit and 32 bit versions. The 64 bit version is more efficient in managing memory and you will see better performance on larger plan files
More informationAutoCAD Civil 3D 2009 ESSENTIALS
AutoCAD Civil 3D 2009 ESSENTIALS SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Alignments and Profiles Section 2: Profiles In this section you learn how
More informationOF LEVELS & ADJUSTMENTS TO THE GRID. Bldg: Levels. PROF. PAUL C. KING RA New York City College of Technology. Learning Community.
Bldg: Levels DEVELOPMENT OF LEVELS & ADJUSTMENTS TO THE GRID Overview: The existing drawing includes 2 levels set 10' apart. For the Lab Building we need to createe a total of 6 levels with a vertical
More informationKitchen and Bath Design Tutorial
Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques
More informationS206E Lecture 6, 5/18/2016, Rhino 3D Architectural Modeling an overview
Copyright 2016, Chiu-Shui Chan. All Rights Reserved. S206E057 Spring 2016 This tutorial is to introduce a basic understanding on how to apply visual projection techniques of generating a 3D model based
More informationKitchen and Bath Design Tutorial
Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques
More informationEPS to Rhino Tutorial.
EPS to Rhino Tutorial. In This tutorial, I will go through my process of modeling one of the houses from our list. It is important to begin by doing some research on the house selected even if you have
More informationRevit Architecture Student Workbook
Revit Architecture Student Workbook Building Information Modeling with Revit Architecture Contents Introduction... 5 Unit 1... 9 Theory: CAD Versus BIM... 9 Revit Architecture: Introduction, Interface,
More informationACAD-BAU TUTORIAL For BricsCAD platform
ACAD-BAU TUTORIAL WWW.ARHINOVA.SI For BricsCAD platform August 06 WORKSPACE ACAD-BAU RIBBON ACAD-BAU CONTROL BAR F ACAD-BAU PALETTES BASIC SETTINGS Use New command and open the template called ACB_International.DWT.
More informationKitchen and Bath Design Tutorial
Kitchen and Bath Design Tutorial This tutorial continues where the Interior Design Tutorial left off. You should save this tutorial using a new name to archive your previous work. The tools and techniques
More informationModule 1: Building Model Creation
INSTRUCTIONAL MODULES DEMONSTRATING BUILDING ENERGY ANALYSIS USING A BUILDING INFORMATION MODEL Christian Daniel Douglass Industrial and Enterprise Systems Engineering December 1, 2010 Module Summary In
More information84 part video tutorial training course. The course is 100% free with no catches or exclusions. You don
Please Note: If you're new to Revit, you may be interested in my " Beginner's Guide to Revit Architecture " 84 part video tutorial training course. The course is 100% free with no catches or exclusions.
More informationAutodesk Revit Architecture 2014
ISI ACADEMY Autodesk Revit Architecture 2014 Getting Started Starting Revit Starting Revit for the First Time Opening a Project File Identifying the User Interface Managing User Interface Understanding
More informationDeck Tutorial. Decks and Porches. Drawing Decks
Deck Tutorial The Deck Tutorial continues where the Landscaping Tutorial left off, and explains how to create a deck off the back of the house and connect it to the terrain with an exterior staircase.
More informationBIM - ARCHITECTUAL IMPORTING A SCANNED PLAN
BIM - ARCHITECTUAL IMPORTING A SCANNED PLAN INTRODUCTION In this section, we will demonstrate importing a plan created in another application. One of the most common starting points for a project is from
More informationDeck Tutorial. Decks and Porches. Drawing Decks
Deck Tutorial The Deck Tutorial continues where the Landscaping Tutorial left off, and explains how to create a deck off the back of the house and connect it to the terrain with an exterior staircase.
More informationREVIT - RENDERING & DRAWINGS
TUTORIAL L-15: REVIT - RENDERING & DRAWINGS This Tutorial explains how to complete renderings and drawings of the bridge project within the School of Architecture model built during previous tutorials.
More informationExisting and Design Profiles
NOTES Module 09 Existing and Design Profiles In this module, you learn how to work with profiles in AutoCAD Civil 3D. You create and modify profiles and profile views, edit profile geometry, and use styles
More informationAutoCAD Architecture 2018 Fundamentals
Elise Moss Autodesk AutoCAD Architecture 2018 Fundamentals SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationAutodesk AutoCAD Architecture 2015 Fundamentals
Autodesk AutoCAD Architecture 2015 Fundamentals Elise Moss SDC P U B L I C AT I O N S Authorized Author Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the
More informationNumber Object Category Attribute Name Explanation Examples Further comments
1 STORY 2 GRID 3 COLUMN 2 Story Elevation Absolute elevation for story (the name "story" is prefered over "level", as level is used in e.g. Revit Typically, our elevations for a project are all relative
More informationGetting Started with. Vectorworks Architect
Getting Started with Vectorworks Architect Table of Contents Introduction...2 Section 1: Program Installation and Setup...6 Installing the Vectorworks Architect Program...6 Exercise 1: Launching the Program
More informationArchiCAD Tutorial: How to Trace 2D Drawings to Quickly Create a 3D Model
ArchiCAD Tutorial: How to Trace 2D Drawings to Quickly Create a 3D Model Hello, this is Eric Bobrow of Bobrow Consulting Group, creator of the ArchiCAD MasterTemplate with another ArchiCAD video tip. In
More informationModule 1E: Parallel-Line Flat Pattern Development of Sheet- Metal Folded Model Wrapping the 3D Space of An Oblique Circular Cylinder
Inventor (10) Module 1E: 1E- 1 Module 1E: Parallel-Line Flat Pattern Development of Sheet- Metal Folded Model Wrapping the 3D Space of An Oblique Circular Cylinder In this Module, we will explore the topic
More informationModule 1: Styles and Advanced Object Tools
Module 1: Styles and Advanced Object Tools This module contains: Section 1: General Style Information Using the Style Manager General Style Properties Working with Materials Classifications Display Properties
More informationPart 8: The Front Cover
Part 8: The Front Cover 4 Earpiece cuts and housing Lens cut and housing Microphone cut and housing The front cover is similar to the back cover in that it is a shelled protrusion with screw posts extruding
More informationAdvance Concrete. Tutorial
Advance Concrete Tutorial Table of contents About this tutorial... 9 How to use this guide... 10 Lesson 1: Creating a building grid... 11 Step 1: Create a default building grid... 11 Step 2: Set the distances
More informationDESIGN AND MODELLING OF ORPHAN HOME
DESIGN AND MODELLING OF ORPHAN HOME B.T.Shyamala 1,M.Manoj Kumar 2 1 Asst Professor,CIVIL, Dr.KV Subba Reddy College Of Engineering For Women,Kurnool,Andhrapradesh,India. 2 Asst Professor,CIVIL, Dr.KV
More informationBasic tools. In this tutorial you will study how to: House for Living-2008 Arh. AART Architects
Basic Tools Basic tools House for Living-2008 Arh. AART Architects Home for Life is designed as the world s first Active House and sets new standards for combining energy-efficient solutions with a healthy
More informationCONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT...
CONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT... 17 INTRODUCTION... 17 Terminology... 18 MACINTOSH AND WINDOWS... 20 CONVENTIONS USED IN THIS TUTORIAL... 21 Command Menu Title And Pull-Down Menu... 22 Commands,
More informationRoof Tutorial Wall Specification
Roof Tutorial The majority of Roof Tutorial describes some common roof styles that can be created using settings in the Wall Specification dialog and can be completed independent of the other tutorials.
More informationCreating a Model C H A P T E R 2. Placing Walls. Adding Exterior Walls
C H A P T E R 2 Creating a Model Now that you have a solid working knowledge of the Autodesk Revit Architecture interface and you understand how it differs from most other drafting applications, it s time
More informationArranging and Patterning Objects
C H A P T E R Arranging and Patterning Objects Learning Objectives After completing this chapter, you will be able to do the following: Relocate objects using the MOVE tool. Change the angular positions
More informationFLOS Web Configurator GUIDE FOR LIGHT STRUCTURES
FLOS Web Configurator GUIDE FOR LIGHT STRUCTURES To make your project, please follow the steps below. Please, first open your internet browser and access to the address: http://configurator.flosarchitectural.net
More informationModule 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece
Inventor (10) Module 1H: 1H- 1 Module 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece In this Module, we will learn how to create an ellipse-based cylindrical sheetmetal lateral piece
More informationAutodesk Architectural Desktop Functionality for the Autodesk Building Systems User
11/28/2005-1:00 pm - 2:30 pm Room:N. Hemispheres (Salon A1) (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida Autodesk Architectural Desktop Functionality for the Autodesk Building Systems
More informationTutorial 4: Overhead sign with lane control arrows:
Tutorial 4: Overhead sign with lane control arrows: SignCAD Analysis The sign above splits multilane freeway traffic into two routes/destinations. It uses the overhead lane control arrows. The top half
More informationThe Revolve Feature and Assembly Modeling
The Revolve Feature and Assembly Modeling PTC Clock Page 52 PTC Contents Introduction... 54 The Revolve Feature... 55 Creating a revolved feature...57 Creating face details... 58 Using Text... 61 Assembling
More informationSolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI
SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
More informationManaging images with NewZapp
Managing images with NewZapp This guide is for anyone using the NewZapp Fixed editor as opposed to the Drag and Drop editor. The Image Manager is where images are uploaded and stored in your NewZapp account
More informationComputer Assisted Drafting (CAD) Level I & II
Computer Assisted Drafting (CAD) Level I & II Program Description: Level I The Computer Assisted Drafting program prepares students for successful careers beginning as entry level design drafters in Architectural,
More informationPrinciples and Practice
Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2011 Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation
More informationAutoCAD Architecture 2014
CADLearning for AutoCAD Architecture 2014 Course Details 19+ hours of training 325 video tutorials Exercise files included Instructor: Reid Addis Course Description CADLearning for AutoCAD Architecture
More informationDigital Camera Exercise
Commands Used New Part This lesson includes Sketching, Extruded Boss/Base, Extruded Cut, Fillet, Chamfer and Text. Click File, New on the standard toolbar. Select Part from the New SolidWorks Document
More informationAutodesk Revit Architecture 2014
CADLearning for Autodesk Revit Architecture 2014 Course Details 52+ hours of training 534 video tutorials Exercise files included Instructor: Jason Boehning Course Description CADLearning for Autodesk
More informationAssignment 5 CAD Mechanical Part 1
Assignment 5 CAD Mechanical Part 1 Objectives In this assignment you will apply polyline, offset, copy, move, and rotated dimension commands, as well as skills learned in earlier assignments. Getting Started
More informationCanoe Mirroring Lofts
Canoe Mirroring Lofts 1. Set Units to Inches 2. Create a New Design. 3. Save the Design as canoeinl811 in your Canoe folder. 4. Create a New Sketch on the Frontal Workplane. Name the Sketch Middle. 5.
More informationKitchen and Bath Design Tutorial
Adding Cabinets Chapter 5: Kitchen and Bath Design Tutorial This tutorial continues where the Materials Tutorial left off. You should save this tutorial using a new name to archive your previous work.
More informationModule 1C: Adding Dovetail Seams to Curved Edges on A Flat Sheet-Metal Piece
1 Module 1C: Adding Dovetail Seams to Curved Edges on A Flat Sheet-Metal Piece In this Module, we will explore the method of adding dovetail seams to curved edges such as the circumferential edge of a
More informationGetting Started with. Vectorworks Architect
Getting Started with Vectorworks Architect Table of Contents Introduction...2 Section 1: Program Installation and Setup...6 Installing the Vectorworks Architect Program...6 Exercise 1: Launching the Program
More informationAppendix to Chapter 1 Release 3
Appendix to Chapter 1 Release 3 Introduction to AutoCAD Architectural Desktop Release 3 Enhancements to AutoCAD Architectural Desktop Release 3 include changes in the content of the menu bar, toolbars,
More informationModeling Basic Mechanical Components #1 Tie-Wrap Clip
Modeling Basic Mechanical Components #1 Tie-Wrap Clip This tutorial is about modeling simple and basic mechanical components with 3D Mechanical CAD programs, specifically one called Alibre Xpress, a freely
More informationSash Clamp. Sash Clamp SW 2015 Design & Communication Graphics Page 1.
Sash Clamp 1 Introduction: The Sash clamp consists of nine parts. In creating the clamp we will be looking at the improvements made by SolidWorks in linear patterns, adding threads and in assembling the
More information10/14/2010. Chevy Malibu. Vehicle Design with Solidworks. Start SolidWorks Create a New SolidWorks Document. Miles, Rowardo B
Chevy Malibu Vehicle Design with Solidworks Start SolidWorks Create a New SolidWorks Document Miles, Rowardo B 1 Click: Part and then OK Now you are ready to make a Part. 2 Right Toolbar: Document Properties:
More informationScaffolding Software iscaf - Design v6.50. New Features. August 2015
Scaffolding Software iscaf - Design v6.50 August 2015 2010-2015 iscaf - Design : 6.5 (August, 2015) Windows 10 No Problem! All our software runs on Windows 10. iscaf is also optimized for 64-bit operating
More informationBatch Processing Converting images in a folder to JPEG
Batch Processing Converting images in a folder to JPEG Request I would like to convert multiple RAW images (NEF files) to JPEG images all at once Response You can use a Batch Process to convert all RAW
More informationOpening the Door to Curtain Walls in AutoCAD Architecture, Part I
Opening the Door to Curtain Walls in AutoCAD Architecture, Part I David Driver, President 4D Architects, Ltd. AB210-3 This class gives you a kit of parts and a set of rules methodology for understanding
More informationActivity 1 Modeling a Plastic Part
Activity 1 Modeling a Plastic Part In this activity, you will model a plastic part. When completed, your plastic part should look like the following two illustrations. While building this model, take time
More informationLearning Guide. ASR Automated Systems Research Inc. # Douglas Crescent, Langley, BC. V3A 4B6. Fax:
Learning Guide ASR Automated Systems Research Inc. #1 20461 Douglas Crescent, Langley, BC. V3A 4B6 Toll free: 1-800-818-2051 e-mail: support@asrsoft.com Fax: 604-539-1334 www.asrsoft.com Copyright 1991-2013
More informationPASS Sample Size Software. These options specify the characteristics of the lines, labels, and tick marks along the X and Y axes.
Chapter 940 Introduction This section describes the options that are available for the appearance of a scatter plot. A set of all these options can be stored as a template file which can be retrieved later.
More informationMadCAM 2.0: Drill Pattern Toolpath
MadCAM 2.0: Drill Pattern Toolpath Digital Media Tutorial 2005-2006 MadCAM 2.0 can create a toolpath to drill holes directly into your material. The bit plunges in and out of the material without moving
More informationDeltaCad and Your Horizontal Altitude Sundial Carl Sabanski
1 The Sundial Primer created by In the instruction set SONNE and Your Horizontal Altitude Sundial we went through the process of designing a horizontal altitude sundial with SONNE and saving it as a dxf
More informationCreo Revolve Tutorial
Creo Revolve Tutorial Setup 1. Open Creo Parametric Note: Refer back to the Creo Extrude Tutorial for references and screen shots of the Creo layout 2. Set Working Directory a. From the Model Tree navigate
More informationAEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here.
AEROPLANE Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson. Sketching (Line, Rectangle, Arc, Add Relations, Dimensioning), Extrude, Assemblies and
More informationTo apply proposed roadway data (vertical alignments, cross section template data, cut/fill slopes, etc.)
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: thatcadgirl@aol.com Phone: (919) 417-8351 Fax: (919) 573-0351 Roadway Design Extracting Existing Ground Cross Sections This document
More informationHouse Design Tutorial
House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a
More informationState of Florida Department of Transportation. FDOT Traffic Plans. Signing & Pavement Markings (CE ) Signalization (CE ) Lighting
State of Florida Department of Transportation FDOT Traffic Plans Signing & Pavement Markings (CE-11-0117) Signalization (CE-11-0119) Lighting (CE-11-0118) User Training Manual October 2017 PRODUCTION SUPPORT
More informationSymbols and Standards (Architectural CAD)
Design and Drafting Description In this activity the teacher will give an orientation to the symbols and conventions of Architectural CAD. Industry common symbols are used for most of the fixtures and
More informationFloorplanner Drawing Manual
Floorplanner Floorplanner Drawing Manual Drawing Manual Floorplanner lets you easily create interactive floorplans and publish them online. This manual explains the floorplanner drawing tool. For details
More informationArchicad Layout of Drawings
Archicad Layout of Drawings NOTE: It is important that house features (Walls, Cabinets, Floors, etc.) Have been placed on the proper layer and layer combination for ease of transferring your final drawings
More informationActivity 5.5a CAD Model Features Part 1
Activity 5.5a CAD Model Features Part 1 Introduction In order to use CAD effectively as a design tool, the designer must have the skills necessary to create, edit, and manipulate a 3D model of a part in
More informationHouse Design Tutorial
House Design Tutorial This House Design Tutorial shows you how to get started on a design project. The tutorials that follow continue with the same plan. When you are finished, you will have created a
More informationAutodesk Revit MEP Plumbing: Mystery Solved
Plamen Hristov Capital Engineering Consultants, Inc The plumbing portion of Revit MEP has the undeserved reputation of not ready yet." We will dispel that notion in this hands-on lab where you will have
More informationSubdivision Cross Sections and Quantities
NOTES Module 11 Subdivision Cross Sections and Quantities Quantity calculation and cross section generation are required elements of subdivision design projects. After the design is completed and approved
More informationDrawing a Living Room and Family Room Floorplan
Appendix C Drawing a Living Room and Family Room Floorplan In this chapter, you will learn the following to World Class standards: Draw a Living Room and Family Room Floorplan Draw the Walls and Stairs
More informationUsing Siemens NX 11 Software. The connecting rod
Using Siemens NX 11 Software The connecting rod Based on a Catia tutorial written by Loïc Stefanski. At the end of this manual, you should obtain the following part: 1 Introduction. Start NX 11 and open
More information1. Open the Feature Modeling demo part file on the EEIC website. Ask student about which constraints needed to Fully Define.
BLUE boxed notes are intended as aids to the lecturer RED boxed notes are comments that the lecturer could make Control + Click HERE to view enlarged IMAGE and Construction Strategy he following set of
More informationEG1003 Help and How To s: Revit Tutorial
EG1003 Help and How To s: Revit Tutorial Completion of this tutorial is required for Milestone 1. Include screenshots of it in your Milestone 1 presentation. Downloading Revit: Before beginning the tutorial,
More informationCedar fence. Construction plan. fence with shutters of which you. can decide the angle, allowing to create the required amount of privacy.
4" STEP BY STEP Guide Construction plan Cedar fence A fence with shutters of which you can decide the angle, allowing to create the required amount of privacy. 4" X 4" 76 1 /2" Diffi culty level: 1 2 3
More informationSolidWorks Design & Technology
SolidWorks Design & Technology Training Course at PHSG Ex 5. Lego man Working with part files 8mm At first glance the Lego man looks complicated but I hope you will see that if you approach a project one
More informationFloorplanner Editor Manual
Editor Manual Floorplanner Editor Manual 1 Overview 2 Canvas a 2D view b View Settings 3 3D view a Orbital and walkthrough mode b How to navigate c Adding cameras d Scenery image e Create a render 4 Sidebar
More informationDeltaCad and Your Cylinder (Shepherd s) Sundial Carl Sabanski
1 The Sundial Primer created by In the instruction set SONNE and Your Cylinder Shepherd s Sundial we went through the process of designing a cylinder sundial with SONNE and saving it as a dxf file. In
More informationChapter 2. Drawing Sketches for Solid Models. Learning Objectives
Chapter 2 Drawing Sketches for Solid Models Learning Objectives After completing this chapter, you will be able to: Start a new template file to draw sketches. Set up the sketching environment. Use various
More informationAutoDesk Inventor: Creating Working Drawings
AutoDesk Inventor: Creating Working Drawings Inventor allows you to quickly and easily make quality working drawings from your 3D models. This tutorial will walk you through the steps in creating a working
More informationIntroduction to Autodesk Inventor User Interface Student Manual MODEL WINDOW
Emmett Wemp EDTECH 503 Introduction to Autodesk Inventor User Interface Fill in the blanks of the different tools available in the user interface of Autodesk Inventor as your instructor discusses them.
More informationArchicad Layout of Drawings
Archicad Layout of Drawings NOTE: It is important that house features (Walls, Cabinets, Floors, etc.) Have been placed on the proper layer and layer combination for ease of transferring your final drawings
More information